Qui

ck G

uide

Display PanelOperation Keys

Application Icons

Menu locked

Menu settings activated

Application “Weighing”

Application “Piece counting”

Application “Percent weighing”

Application “Check weighing”

Application “Statistics”

Application “Totaling”

Application “Multiplication factor”

Application “Division factor”

Application “Density”

Status Icons

Indicates stored values (memory)

Adjustments (calibration) started

FACT activated

Diagnostic mode and Applica-tion “Routine test” activated

Service reminder, Service mode activated

Acoustic feedback for pressed keys activated

not used

not used

Charge of battery; full, 2/3, 1/3, discharged(Battery operated models only)

Key Functions

No. Key Press briefly (less than 1.5 s) Press and hold (longer than 1.5 s)

1

• Tochangedisplayresolution(1/10d function) while application is running

Note: not available with approved models in selected countries.

no function

2

• Tonavigateback(scrollup)withinmenutopics or menu selections

• Decrease(numerical)parameterswithinmenu and in applications

• Toselecttheweighingapplication• Decrease(numerical)parametersquickly

within menu or in applications

3

• Tonavigateforward(scrolldown)withinmenu topics or menu selections

• Increase(numerical)parameterswithinmenu and in applications

• Toselectassignedapplicationandenteringthe parameter settings of application

• Defaultapplicationassignment: Piece counting

• Increase(numerical)parametersquicklywithin menu or in applications

4 ON/OFF • Switchon • Switchoff

5 # • Zero • Switchoff

6 C • Cancelandtoleavemenuwithoutsaving(one step back in the menu)

no function

7

• Withentries:scrolldown• Tonavigatethroughmenutopicsormenu

selections• Totogglebetweenunit1,recallvalue(if

selected), unit 2 (if different from unit 1) and the application unit (if any)

• Executepredefinedadjusting(calibration)procedure

8

• Toenterorleavemenuselection(from/tomenu topic)

• Toenterapplicationparameterandswitchtonextparameter

• Tostoreparameter

• Enterandleavemenu(Parametersettings)

9 • Printoutdisplayvalue• Printoutmenusettings• Transmitdata

no function

Application Icons Status Icons

Wei

ghin

g-in

aid

Weight Value Field Unit Field

Weight Value Field

Indicates negative values

Indicates unstable values

Indicates calculated values

Indicates uncertified digits (approved models only)

Unit Field

Markingofweighingunits:mg milligramg gramkg kilogramct caratlb poundoz ounceozt troy ounceGN graindwt pennyweightmom mommemsg mesghaltlh Hong Kong taelstls Singapore taelstlt Taiwan taelstola tolabaht baht

Weighing-in aid

Marking of nominal or target weight

Marking of tolerance limit T+

Marking of tolerance limit T-

Note:If timeout occurs during the setup, balance switches back to the last active application.

Easy Weighing Access Quick Application Access Direct Adjustment Access

Press and hold

F

Zero

Switching Units

Application Settings

Press and hold

#

Press briefly

,Press briefly

COUNT

FIX 10 PCS

C

C

Executepredefinedadjusting (calibration) procedureFactory Setting: Internal adjustment

External Adjustment ProcedureADJ.EXT

1000.00 g

------

0.00 g

------

ADJ.DONE

0.00 g

Press and hold

Press and hold

WEIGH

0.00 g

0.00 g

121.01 g

0.00 g

22.00 g Unit 1,

* 22.00 g M Recall,

0.78 oz Unit 2

M

Jewelry BalancesJP/JS Models

C

51 42 93 6 7 8

Executetheassigned F application. Factorysetting: "Piece Counting"

•Cancelrunning application

Activate weighing application

•ifactivated•ifdifferent

from Unit 1

•ifactivated

*11781461*Mettler-Toledo AGLaboratory WeighingCH-8606Greifensee,Switzerland

Subject to technical changes©Mettler-ToledoAG01/201411781461Aen

www.mt.com/jewelryFor more information

Topic Selection

DATE 8 01.01.08

TIME 8 +1H

-1H

SET .TIME 8 12:00

UNIT 1 8 g

¦ct

UNIT 2 8 ct ¦g

KEY.BEEP 8 MED

HIGH

OFF

LOW

STB.BEEP 8 LOW

MED

HIGH

OFF

RESET 8 NO?

YES?

Topic Selection

WEIG.MOD 8 UNIVERS.

DOSING

ENVIRON. 8 STD.

UNSTAB.

STABLE

CAL 8 ADJ.INT

ADJ.EXT 8 200.00 g

ADJ.OFF

CST.F.ADJ 8 EXECUTE

RESET 8 NO?

YES?

Menu Map

Basic Menu

Advanced Menu

Topic Selection FACT 8 TIME 8 12:00

OFF

FACT PRT 8 ON

OFF

DATE.FRM 8 DD.MM.Y

MM/DD/Y

Y-MM-DD

D.MMM Y

MMM D Y

TIME.FRM 8 24:MM

12:MM

24.MM

12.MM

RECALL 8 OFF

ON

SHUTOFF 8 A.OFF:10'

A.OFF -

A.OFF:2'

A.OFF:5'

B.LIGHT 8 B.L. ON

B.L. OFF

B.L. 30''

B.L.1'

B.L. 2'

B.L. 5'

A.ZERO 8 ON

OFF

ASSIGN:F 8 COUNT

PERCENT

CHECK

STAT

TOTAL.

FACTOR.M

FACTOR.D

DENSITY

R. TEST

DIAGNOS 8 REPEAT.T

DISPLAY

KEYPAD.T

CAL.MOT

BAL.HIST

CAL.HIST

BAL.INFO

SRV.PROV

SRV.ICON 8 ON

OFF

SRV.D.RST 8 NO?

YES?

Topic Selection1) RS232 8 PRINTER 8 PRT.STAB

PRT.AUTO

PRT.ALL

PC-DIR. 8 PRT.STAB

PRT.AUTO

PRT.ALL

HOST 8 SND.OFF

SND.STB

SND.CONT

SND.AUTO

SND.ALL

2.DISP ¥

HEADER 8 NO

DAT/TIM

D/T/BAL

SIGN.L 8 OFF

ON

LN.FEED 8 0

ZERO.PRT 8 OFF

ON

COM.SET 8 MT-SICS

MT-PM

SART

1) BAUD 8 9600

¦4800

1) BIT.PAR. 8 8/NO

7/NO

7/MARK

7/SPACE

7/EVEN

7/ODD

1) STOPBIT 8 1 BIT

2 BITS

1) HD.SHK 8 XON.XOFF

RTS.CTS

OFF

1) RS E.O.L. 8 CR LF

CR

LF

TAB

1) RS.CHAR 8 IBM.DOS

ANSI.WIN

INTERVL. 8 0

Interface Menu

BASIC 8  

ADVANCE.  8

INT.FACE 8

PROTECT 8

Main MenuBasic Menu

Advanced Menu

Interface Menu

Protection

•Entermenu•Leavemenu

with saving

Scroll down

Scroll up

Menu Operation

•Enterselection or menu

•Executesetting

•Onestepback•Leavemenu

without saving

,

+8

C

Legend

Factory setting Only those weight units allowed by the appropriate

national legislation are selectable. Not available with JS models Not available with approved models Not available with approved models

(exceptOIMLaccuracyclassIapprovedmodels)¥ Settings are automatically set for the 2nd displaySoftware versionV2.20

Menu Selection

PROTECT 8 OFF

ON

Protection

1) Note for 2nd RS232C Interface (COM2)• Ifasecondinterfaceisinstalled,themenutopicisdisplayedfor

each interface, e.g "BAUD.1" for standard interface (COM1) "BAUD.2" for 2nd interface (COM2)• OnlyoneprintercanbesetiftwoRS232interfacesareexisting

600…38400

g Gold Models ct Carat Models

ct Gold Models g Carat Models