rfi form · pdf file rfi form rfi no.161 project: rockwell elementary school renovations and...

Click here to load reader

Post on 17-Jul-2020

2 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • RFI FORM

    RFI NO. 161

    PROJECT: Rockwell Elementary School

    Renovations and Additions

    400 Whittlesey Drive

    Bethel, CT 06801

    OWNER: Town of Bethel

    ARCHITECT: Perkins Eastman

    CONSTRUCTION MANAGER: Rizzo Corporation

    DATE: 11/30/18

    FROM: Joe Puglisi

    COMPANY NAME: The NY-CONN Corp.

    SUBJECT: Temporary Classroom Electrical Requirements

    DISCIPLINE/TRADE: BP#16 – Electrical

    DWG./SPEC. REFERENCE:

    QUESTION:

    We cannot find the electrical requirements for the temporary classroom structure

    (s) in the bid documents provided. Please prvide the following information

    regarding the electrical, communication, and electronic safety and security

    require,ents for the temporary classroom building(s), in order to foster fair & level

    bidding.

    - Voltage, ampacity & configuration of the Electrical Service & the location that

    electrical service is to be derived.

    - Type of electrical service lateral (overhead or underground)

    - Equipment required at the sercice entrance (i.e service entrance disconnect?,

    meter pan and meter?, etc.)

    - Tele-Comm Service Requirements & location of utility company connection.

    - Electronic safety and security requirements in General

  • ANSWER:

    See Scope Clarifications on Addendum #5

    RESPONSE BY: SUSAN M. CHIPOURAS DATE: 12/6/18

  • RFI FORM

    RFI NO. 162

    PROJECT: Rockwell Elementary School

    Renovations and Additions

    400 Whittlesey Drive

    Bethel, CT 06801

    OWNER: Town of Bethel

    ARCHITECT: Perkins Eastman

    CONSTRUCTION MANAGER: Rizzo Corporation

    DATE: 11/30/18

    FROM: Michael Dilorio

    COMPANY NAME: TD & Sons

    SUBJECT: Top Soil Stockpile

    DISCIPLINE/TRADE: BP#17 – Site Work

    DWG./SPEC. REFERENCE:

    QUESTION:

    Where can topsoil be stockpiled? Or does it have to be moved offsite then returned

    to spread?

    ANSWER:

    Topsoil can be stockpiled on site. Coordinate location with Rizzo Corp.

    Superintendent.

    RESPONSE BY: Susan M. Chipouras DATE: 12/6/18

  • RFI FORM

    RFI NO. 163

    PROJECT: Rockwell Elementary School

    Renovations and Additions

    400 Whittlesey Drive

    Bethel, CT 06801

    OWNER: Town of Bethel

    ARCHITECT: Perkins Eastman

    CONSTRUCTION MANAGER: Rizzo Corporation

    DATE: 11/30/18

    FROM: Michael Dilorio

    COMPANY NAME: TD & Sons

    SUBJECT: Logistics Plans

    DISCIPLINE/TRADE: BP#17 – Site Work

    DWG./SPEC. REFERENCE:

    QUESTION:

    The logistical Plans does not have a color key of when each section is suppose to

    start? The initial gantt chart colors don't correspond. Can you clarify?

    ANSWER:

    See Phasing detail for additional Phasing information.

    RESPONSE BY: Susan M. Chipouras DATE: 12/6/18

  • RFI FORM

    RFI NO. 164

    PROJECT: Rockwell Elementary School

    Renovations and Additions

    400 Whittlesey Drive

    Bethel, CT 06801

    OWNER: Town of Bethel

    ARCHITECT: Perkins Eastman

    CONSTRUCTION MANAGER: Rizzo Corporation

    DATE: 11/30/18

    FROM: John Legere

    COMPANY NAME: Legere Group

    SUBJECT: Plastic Laminate

    DISCIPLINE/TRADE: BP#5 – Architectural Woodwork

    DWG./SPEC. REFERENCE:

    QUESTION:

    According to RFI response #25, colors of plastic laminate and solid surface are “to

    be selected from manufacturer’s full range of standard colors.” As it was

    mentioned in RFI #25, the costs vary widely depending on color. Please specify

    specific price groups for plastic laminate and solid surface materials.

  • ANSWER:

    For Plastic Laminate, provide High Pressure Laminate from one of the following

    three manufacturer’s educational product lines:

    1) Panolam/Nevamar 2) Wilsonart International; Div. of Premark International, Inc 3) Formica Corporation

    For Solid Surface Material, Provide options from price group 3 from any of the

    following manufacturers:

    1) Wilsonart International; Div. of Premark International, Inc 2) Formica Corporation 3) Corian by du Pont Nemours and Company.

    RESPONSE BY: [email protected] DATE: 12/05/2018

  • RFI FORM

    RFI NO. 165

    PROJECT: Rockwell Elementary School

    Renovations and Additions

    400 Whittlesey Drive

    Bethel, CT 06801

    OWNER: Town of Bethel

    ARCHITECT: Perkins Eastman

    CONSTRUCTION MANAGER: Rizzo Corporation

    DATE: 11/30/18

    FROM: Nick Kintgios

    COMPANY NAME: Steeltech Building Products

    SUBJECT:

    DISCIPLINE/TRADE: BP#4 – Structural Steel & Misc. Metals

    DWG./SPEC. REFERENCE:

    QUESTION:

    Ref: Section 7/A001 - Provide specific details such as size of angle, spacing and

    bolts.

    ANSWER:

    Refer to attached sketch SKS-2 for details.

    RESPONSE BY: [email protected] DATE: 12/6/18

  • C.M.U. WALL AT UNDERSIDE OF DECK

    C.M.U. WALL AT UNDERSIDE OF BEAM

    NOTES: 1. BRACING AT TOP OF WALL IS NOT REQUIRED BETWEEN INTERSECTING WALLS, IF INTERSECTING WALLS ARE SPACED LESS THAN 12'-0" O.C. FOR 12", 10" AND 8" WALLS. BRACING IS NOT REQUIRED AT TOP OF A 6" WALL, IF INTERSECTING WALLS ARE SPACED LESS THAN 10'-0" O.C.

    T.O.S. SEE PLAN

    4"

    2" 2"

    ±

    (3) #10 SHEET METAL SCREWS (TYP. EACH SIDE)

    BOND BEAM SEE MASONRY

    NOTES FOR REINF. (TYP.) CMU WALL

    (SEE ARCH. DWGS.)

    BENT PLATE 1/4"x8"x4"x12" LONG (TYP. EACH SIDE @ 6'-0" O.C. MAX)

    4" 2"

    2" ±

    BOND BEAM SEE MASONRY

    NOTES FOR REINF. (TYP.)

    CMU WALL (SEE ARCH. DWGS.)

    BENT PLATE 1/4"x12" LONG @ 6'-0" O.C. MAX

    C OF BEAM

    L

    STEEL BEAM

    (SEE PLAN) VARIES

    3 SIDES, TYP.

    C.M.U. WALL AT UNDERSIDE OF BEAM

    A LL

    S ID

    E S

    ( T

    Y P

    .) 1"

    S P

    A C

    E

    BOND BEAM SEE MASONRY

    NOTES FOR REINF. (TYP.)

    CMU WALL (SEE ARCH. DWGS.)

    L4x4x1/4 x 1" LONG 1" MIN. WELD TO W SECTION (TYP. EACH SIDE)

    T.O.S. SEE PLAN

    (T Y

    P .)

    1" S

    P A

    C E

    W SECTION ( BEAM)

    T

    I V E R S I F I E D E C H N O L O G Y O N S U L T A N T S

    2321 Whitney Avenue - Hamden Center II - Hamden CT 06518

    Ph: 203 239 4200 Fax: 203 234 7376

    www.teamdtc.com

    D T C

    NOTES:

    GRAPHIC SCALE

    0 8'8' 4'

    SCALE: 3/4" = 1'-0"

    ANNA H. ROCKWELL ELEMENTARY SCHOOL ADDITIONS & RENOVATIONS

    400 WHITTLESEY DR, BETHEL, CT

    06801

    SKS-2 DRAWN BY: BS

    CHECKED BY: RO

    DATE: 12/06/18

    PROJECT NO.68961.00

    3/4" = 1'-0" 1

    BRACING AT TOP OF CMU WALLS

  • RFI FORM

    RFI NO. 166

    PROJECT: Rockwell Elementary School

    Renovations and Additions

    400 Whittlesey Drive

    Bethel, CT 06801

    OWNER: Town of Bethel

    ARCHITECT: Perkins Eastman

    CONSTRUCTION MANAGER: Rizzo Corporation

    DATE: 11/30/18

    FROM: Angelo Ortiz

    COMPANY NAME: NEFS

    SUBJECT: Basketball Hoops

    DISCIPLINE/TRADE: BP#11B – Gymnasium Equipment

    DWG./SPEC. REFERENCE:

    QUESTION:

    Do you have any clarification on the basketball hoops? The two that are shown in

    the drawings are listed as to remain but the specifications are requesting all new

    ceiling suspended units.

    ANSWER:

    Refer to RFI 149.

    RESPONSE BY: [email protected] DATE: 12/05/2018

  • RFI FORM

    RFI NO. 167

    PROJECT: Rockwell Elementary School

    Renovations and Additions

    400 Whittlesey Drive

    Bethel, CT 06801

    OWNER: Town of Bethel

    ARCHITECT: Perkins Eastman

    CONSTRUCTION MANAGER: Rizzo Corporation

    DATE: 11/30/18

    FROM: Ava Faulkner

    COMPANY NAME: Mulberry Signs

    SUBJECT: Signage

    DISCIPLINE/TRADE: BP#10 – Signage

    DWG./SPEC. REFERENCE: IG-001

    QUESTION:

    The Sign Types listed on Drawing IG-001 has no sizes for the signs. Only the

    letter heights. What are the dimensions of the signs?

    ANSWER:

    See Matrix below. Sizes given are minimum overall dimensions for the non-

    decorative portion of the sign (see area dimensioned in red below). decorative

    borders may vary in size.

  • Sign Type Height Width

    A1 3 1/2" 6"

    A2 3 1/2" 6"

    A3 3 1/2" 6"

    A4 3 1/2" 6"

    B1 8" 6"

    B1* 8" 6"

    B2 8 3/4" 6"

    B3 8 3/4" 6"

    C 8 3/4" 6"

    D 8 1/2" 6"

    E 8 1/2" 6"

    E1 8 3/4" 6 1/2"

    F 10 1/2" 11"

    G 10 1/2" 10"

    J 8" 6"

    K 10 1/2" 6"

    L 6" 6"

    M 8" 6"

    O 6" 6"

    P 3" 6"

    R 1'-1" 8 1/2"

    RESPONSE BY: [email protected] DATE: 12/05/2018

  • RFI FORM