ruffled edge blanket - shannon fabrics
TRANSCRIPT
Ruffled Edge BlanketRuffled Edge Blanket
e information in this pattern is presented in good faith. Every effort has been taken to assure the accuracy herein.
©2017 Shannon Fabrics Inc.3131 S. Alameda St., Los Angeles, CA 90058. 866.624.5252
Ruffled Edge BlanketUse the woven grid lines on the fabric to get accurate cuts.
From each of the Embrace™ double gauze fabrics, cut one 47” square.
From Solid Aruba, cut (8) eight 6” x 47” strips. Sew ends together with a 1/2” seam allowance to create a continuous loop for ruffle.
Fold ruffle loop in half lengthwise, wrong sides together, using the woven grid lines as a guide, and press.
LLay front layer of Embrace™ double gauze over middle layer. Pin well and baste together with a long straight stitch.
Mark ruffle loop with water soluble pen in 1/4 segments. You will use these to apply the gather evenly.
GGather ruffle to measure 188”. Pin ruffle to right side of blanket front/middle, aligning marks on ruffle with corners of blanket. Stitch ruffle all the way around with a scant 1/2” seam allowance, rounding the corners for ease of construction.
Lay back layer of Embrace™ double gauze over blanket front, right sides together, sandwiching the ruffle inside. Pin well.
SStitch together with a 1/2” seam allowance, leaving a 6-inch gap on one side.
Turn inside out, press edges. Press under seam allowance and gap and pin well around the blanket. Top stitch 1/4” from ruffle seam to secure all layers. If you have decorative stitches on your sewing machine, this is a perfect time to use one!
For more tips and tricks on working with Embrace™ double gauze, visit www.shannonfabrics.com/cuddle-tips-and-tricks