specification sheet air sea biojar™ 1.5 litre - ip2 inner ... · air sea biojar™ 1.5 litre -...

AIR SEA BIOJAR™ 1.5 LITRE - IP2 INNER PACKAGING AIR SEA CONTAINERS LTD. SPECIFICATION SHEET INNER IP2 PACKAGING CODE:490 HIGH PERFORMANCE POLYPROPYLENE JAR AND SEALED CLOSURE SUITABLE FOR MOST CORROSIVES AND TOXIC SUBSTANCES NOTES: The BioJar™ has a Nominal Capacity of 1.5 Litres, and is capable of withstanding 95 kPa (1 Bar) The closure is internally threaded polypropylene which is secured tightly by the use of the handle at the head. The standard bung seal is EPDM. This container is suitable for: Flammable Liquids (Class 3) Flammable Solids (Class 4) Oxydizing Agents (Class 5) Peroxides (Class 5) Toxics (Class 6.1) Infectious Substances (Class 6.2) Some Radioactives (Class 7) Most Corrosives (Class 8) It is the Shippers responsibility to ensure that products are compatible with their containers and closures. This BioJar™ Jar may be transported in a variety of outer packagings and can be used as a Primary Receptacle or Secondary Packaging under ICAO/IATA Packing Instruction 620 for Infectious Substances and under IATA Packing Instruction 650 for Diagnostic Specimens. Further details on Request. A FULLY AUTOCLAVABLE POLYPROPYLENE CONTAINER CAPABLE OF WITHSTANDING 95kPa. NOMINAL DIMENSIONS Radius 60mm Body Wall Thickness: 3mm Internal Diameter: 120mm Aperture Wall Thickness: 6mm External Diameter: 150mm Bung Size: 135mm External Height: 160mm Overall Weight: 284g Internal Height: 155mm Nominal Capacity: 1.5 Litre Overall Height: 190mm Brimful Capacity: 1.6 Litre CAUTION! DRY ICE MUST NOT BE PACKED IN THE BIOJAR™ OTHER OPTIONAL ACCESSORIES CODE 485 122 x 10mm E.P.E. LAYER PAD CODE 486 122 x 25mm E.P.E. LAYER PAD CODE 489 122 x 25mm E.P.E. SPECIMEN HOLDER 7 x 28mm holes OR 7 x 34mm holes (CODE 493) CODE 483 122 x 25mm E.P.E. SPECIMEN HOLDER 25 x 12mm holes CODE 484 122 x 25mm E.P.E. SPECIMEN HOLDER 50 x 7.5mm holes BioJar™ POLYPROPYLENE CLOSURE WITH EPDM SEAL & Built-in torque handle SEAL LUG Optional Tamper-Evident Seal (CODE 499) Polypropylene BioJar™ CONTAINER Capable of withstanding 95kPa. Flat Base CROSS SECTION OF FLUSH CLOSURE EPDM Seal Handle Reinforcing Boss Lip 3mm Walls 120mm 521 Cavendish Street Birkenhead, CH41 8FZ Unted Kngdom Tel: +44 (0) 151 653 1500 Fax: +44 (0) 151 653 1515 Web site: www.air-sea.co.uk E-mail: [email protected]

Upload: vankhuong

Post on 03-Sep-2018

226 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

AIR SEA BIOJAR™ 1.5 LITRE - IP2 INNER PACKAGING

AIR SEA CONTAINERS LTD.

SPECIFICATION SHEET

INNER IP2PACKAGING

CODE:490HIGH PERFORMANCEPOLYPROPYLENE JAR

AND SEALED CLOSURE

SUITABLE FOR MOSTCORROSIVES AND

TOXIC SUBSTANCES

NOTES:The BioJar™ has a NominalCapacity of 1.5 Litres, and iscapable of withstanding

95 kPa (1 Bar)The closure is internallythreaded polypropylene whichis secured tightly by the use ofthe handle at the head. Thestandard bung seal is EPDM.

This container is suitable for:Flammable Liquids (Class 3)Flammable Solids (Class 4)Oxydizing Agents (Class 5)Peroxides (Class 5)Toxics (Class 6.1)Infectious

Substances (Class 6.2)Some Radioactives (Class 7)Most Corrosives (Class 8)

It is the Shippers responsibilityto ensure that products arecompatible with theircontainers and closures.

This BioJar™ Jar may betransported in a variety of outerpackagings and can be usedas a Primary Receptacle orSecondary Packaging underICAO/IATA PackingInstruction 620 for InfectiousSubstances and under IATAPacking Instruction 650 forDiagnostic Specimens.

Further details on Request.

A FULLY AUTOCLAVABLE POLYPROPYLENE CONTAINERCAPABLE OF WITHSTANDING 95kPa.

NOMINAL DIMENSIONSRadius 60mm Body Wall Thickness: 3mmInternal Diameter: 120mm Aperture Wall Thickness: 6mmExternal Diameter: 150mm Bung Size: 135mmExternal Height: 160mm Overall Weight: 284gInternal Height: 155mm Nominal Capacity: 1.5 LitreOverall Height: 190mm Brimful Capacity: 1.6 Litre

CAUTION! DRY ICE MUST NOTBE PACKED IN THE BIOJAR™

OTHER OPTIONAL ACCESSORIES

CODE 485122 x 10mm E.P.E.LAYER PAD

CODE 486122 x 25mm E.P.E.LAYER PAD

CODE 489122 x 25mm E.P.E.SPECIMEN HOLDER7 x 28mm holesOR 7 x 34mm holes(CODE 493)

CODE 483122 x 25mm E.P.E.SPECIMEN HOLDER25 x 12mm holes

CODE 484122 x 25mm E.P.E.SPECIMEN HOLDER50 x 7.5mm holes

BioJar™POLYPROPYLENECLOSURE WITHEPDM SEAL& Built-in torque handle

SEAL LUG

OptionalTamper-EvidentSeal (CODE 499)

PolypropyleneBioJar™CONTAINERCapable ofwithstanding95kPa.

Flat Base