www.globalfinishing.com

Global Finishing Solutions

®

Spray Booth AccessoriesGFS' spray booth accessories are a new line of products developed to organize your spraying equipment.

> HeavyDuty

> ExceptionalQuality&Finish

> Removable—MagneticMounting

> StoresSupplieswithinArmsReach

> BeneficialtoAnySprayBooth

KarajenCorp.patentpendingonallproductslistedwithin.

SPRAY GUN WALL CABINET

All purpose, extremely sturdy, lockable,singledoorwallcabinetfor the storage of various materials, toolsandothersupplies.Includesan 8-position spray gun holding shelf andaflatshelfforspraygunparts and other painting supplies. The Door interior is equipped with 2 sets of sand paper sleeve holders (Padlock&MountingFastenersnotincluded).

20g steel- powder coated finish: 25"w, 25"h, 10"d.Approximately34lb.shippingweight 218-019 WallCabinet

BOOTHBOX MINITMPatentPending

A magnetic, single compartmentcabinetanddoublespraygunholder,designed for the interior of spraybooths. Increase efficiency andproductivity by storing your neededpainting items close at hand whenpainting.Avoidtripsinandoutoftheboothduringapaintjob!

20g steel- powder coated finish: 14"w, 7.25"h, 6"d.Approximately9lb.shippingweight 218-005BoothBoxMiniwithMountingFasteners 218-006BoothBoxMiniMagnetic

BOOTHBOX 2TM PatentPending

A magnetic, double compartmentcabinetanddoublespraygunholder,designed for the interior of spraybooths. Increase efficiency andproductivity while eliminating timewasting trips inandoutof thespraybooth.Storecommonlyusedsupplieswithinarmsreach.

20g steel- powder coated finish: 15"w, 14"h, 6.5"d.Approximately14lb.shippingweight 218-001BoothBox2withMountingHooks 218-002BoothBox2Magnetic

BOOTHBOXTM CORNER MOUNT PatentPending

Corner mounted paint booth cabinetwith 4 spray gun hangers attached.Mounts 1" away from wall to allowfor airflow. 2 removable shelves, 2removable doors and entire cabinetliftsoffofmountingbracketsforeasycleaning of cabinet and booth walls.Thiscornermountedcabinethelpstoeliminatetripsinandoutofthebooth,stores your commonly used suppliescloseathandwhenpainting.

18g steel- powder coated finish: 20"w, 18"h, 11.5"d.Approximately34lb.shippingweight 218-031BoothBoxCornerMountwithMountingBrackets

SPRAY BOOTH

SINGLE SPRAY GUNHANGERTM

AMagneticspraygunholder,designedtoholdalltypesofspraygunsandmosttypesofairtools.SoftEdgeguardtoeliminatescratchingofgunorguncup.

16gsteel-powdercoatedfinish:3"w,5"d.Approximately2lb.shippingweight

218-003 SingleSprayGunhangerwithMountingFasteners 218-004SingleSprayGunhangerMagnetic

4 GUNHANGERTM PatentPending

Amagnetic,4-Positionspraygunholderforspray booths, prep areas or anywhere inthe shop. Also works great in paint mixingrooms.Equippedwithatapeholdinghookforstoring tape, spray gun wrench and otherneededitems.

13g steel- powder coated finish: 7.5"w,18.75"h,7"d.Approximately7lb.shipweight.218-010 4-GunhangerwithMounting Fasteners

218-011 4-GunhangerMagnetic

HOSE & GUNHANGERTM PatentPending

A double spray gun holder and air hosehanger. Used for spray booths, prep areasor anywhere in the shop. Equipped with atapeholdinghook forstoring tapeorotherneededitems.

13g steel- powder coated finish: 7.5"w,18.75"h,7"d.Approximately7lb.shipweight.

218-012Hose&GunhangerwithMountingFasteners 218-013Hose&GunhangerMagnetic

Cabinetnotintendedforstorageofflammablematerials/notratedexplosionproof.

ACCESSORIES

KarajenCorp.patentpendingonallproductslistedwithin.

BOOTHSHELF WMTM PatentPending

A magnetic, 3-Position spray gun holderand vented working shelf combination.Use the BoothShelf WM™ anywhere inthe spray booth, mixing room or prepdeck toholdsprayguns, tape, tackclothandotherpaintingitemsforeasyaccesswhilepainting.

16g steel- powder coated finish: 14"w, 10"h, 8.5"d.Approximately8lb.shippingweight. 218-008BoothShelfWMwithMountingFasteners 218-009BoothShelfWMMagnetic

BOOTHSHELF CMTM PatentPending

Cornermounted(bolton)3-Positionspraygunhangerandventedworkingshelf.UsetheBoothShelfCM™inthecornerofyourspray booth, mixing room or prep decktoholdsprayguns,tackcloth,paintcupsetc,foreasyaccesswhilepainting.Works

greatasasmallmixingshelf.Equippedwithsoftedgeguardtoeliminatescratchingofgunorguncup.

16g steel- powder coated finish: 21"w, 12.5"d.Approximately5lb.shippingweight. 218-007BoothShelfCMwithMountingFasteners

TEST PANEL HOLDER™ PatentPending

SimplifyYourTestPanelProcess!Attach paper or metal test panels, holdand spray! For flash and dry times, oreveryday storage, place the Test PanelHolderontheboothwallorothersheetmetalsurfacebyitsmagnets.

218-023TestPanelHolderwithclipboard 218-024TestPanelHolderwithoutclipboard

TAPE BELT CLIPTM

HoldtapeatyoursidewhenmaskingwiththeTapeBeltClip™.Twosizesavailablethatwillholduptoone1½"tape,orone2"tape.

218-0211½"tapesizemax,withtoolholdingmagnet 218-0221½"tapesizemax,notoolholdingmagnet 218-0202"tapesizemax,notoolholdingmagnet

MAGAHOOKTM

Allpurposemagnetichooksthataregreatfortheshopand,industrialorhomeuse.TheMagahooks™areusefulinholdingavarietyofobjectstoametalsurfacesuchassprayboothwalls,partscaddys,lockers,toolboxes,warehouseracking,refrigeratorsandmuchmore!

AIR-PORTTM AIR BRUSH WORK STATION PatentPending

TheAIR-PORT,AirbrushWorkStationholds your needed Airbrushes,tools and supplies nearby while youperformyourartwork.TheAir-Port™isequippedwith3airbrushhangers.Itstoresmultiplecolorbottles, tape,

razorblades,utility knife,pencilsandmore.TheAIR-PORT™offerstwoconvenientmethodsofmounting:Magneticorwithmountingfasteners 218-027AIR-PORTAirbrushworkstationwithMounting Fasteners 218-028AIR-PORTAirbrushworkstation,Magnetic

SINGLE AIRBRUSH HANGERTM PatentPending

TheSingleAirbrushHangerattachestoawallmagnetically,orcanbeboltedpermanently.It will hang all styles of airbrushes. Itsadjustable positions accommodates for thevaryingtypesofairbrushes,shapesandfeed

types(gravity,siphon,sideloadetc.).Constructedofsolid18gaugesteel,itisdesignedforlonglastingdurability. 218-030SingleAirbrushHangerwithMountingFasteners 218-029SingleAirbrushHanger:Magnetic

(800)848-8738

CAUTION:Eachofthemagneticproductsareequippedwithhighlypowerfulmagnetsthatwillperformthetask(s)intendedfor.Alwaysusecautionwithanymagneticproduct.Keepfingers,andotherimportantbodyparts,awayfromthepathofmagnetic/metalcontact!Neveruseanymagneticaccessoryonornearcomputerequipment.

218-014MAGAHOOK™

218-015MAGAHOOK™'U'STYLE

218-016MINIMAGAHOOK™

218-017MINIMAGAHOOK™'U'Style

2.65"Base,3"Shaft,65lbpull

2.65"Base,softcoatedhook,65lbpull

1.42"Base,noncreasingclip,16lbpull

1.42"Base,16lbpull

KarajenCorp.patentpendingonallproductslistedwithin.

PARTS & FILTERS

®

Global Finishing Solutions • 800-848-8738 • parts@globalfinishing.comOsseo, WI • Dallas, TX • Barrie, ON • Monterrey, MX

www.globalfinishing.com ©2007GlobalFinishingSolutions.AllRightsReserved.BOOTHACCESS07032007

GFS’questforproductqualityandperformancehasresultedinafulllineofaccessoriesthathavebeendesignedandmanufacturedfordurabilityandlonglasting,trouble-freeservice.GreatemphasisisplacedonourengineeringandworkmanshipsothatGFScustomerswillreceivethebestproductsatcompetitiveprices.

Approved Replacement Parts and FiltersGFSisalsoyourapprovedfull-linesupplierforPartsandFiltersfor:

>BinksBooths

>DeVilbissBooths

>JBIBooths&Ovens

>Blu-SurfSystems

>MilbanksSystems

>OtherSprayBoothManufacturers

ExhaustFans

ControlPanelsDuctwork

Filters

• Filters(allMakes&Models)

• ElectricalComponents

•OvenComponents

• Lighting

•Motors

• Fans

• ExhaustDuctwork

•Doors

•GratesandPans

•Panels

• FilterRacks

• Insulation

•Hardware

•OtherMiscellaneous

Full Service Parts and Filters Department

FluorescentLightFixtures

Contact GFS for your local distributor!