The ONLY Stand - AlonePersonal Alert Safety System

The ONLY Stand - AlonePersonal Alert Safety System

1.800.969.6933 www.graceindustries.com

305 Bend Hill RoadFredonia, PA 16124 U.S.A.724-962-9231 Fax: 724-962-3611

Grace Industries, Inc. Printed in U.S.A. SUPERPASS3 0408

SuperPASSTM 3 SPECIFICATIONSMotion Sensor: 3-axis, solid-state, accelerometerenhanced durability

Activation: Auto-on with Proprietary AccountabilityKey

Case: Rugged, High Temperature, Impact Resistant,Translucent Yellow Radel polymer, encapsulated in aprotective silicone cover

Attachments: Two methods - Wire clip and universalSA-clip

Silicone Cover: Rugged, Durable, High Temperature,Impact Resistant, Translucent, Protective SiliconeCover. Field replaceable.

Status Display: Large 6-character, Alphanumeric,LED read-out of PASS status and ExternalTemperature (RTD Model Only)

Alarm Audio Output: Dual resonating sound cavitiesproduce 95+ dBA @ 10ft with Sound Discernability 6dBA against given background noise

Real Time Clock: Records accurate date and timeinformation

Data Logging: Records over 8,000 PASS statuschanges in a non-volatile memory with date and timelog. Data is downloadable to any PC

Switching: Solid-state magnetic activation

Batteries: 4 Duracell MN1500, AA, 1.5 Volt Alkaline

Battery Life: Over 200 hours in Sensing Mode and 10to 12 hours in Alarm

Product Life: 3 to 5 years depending on frequencyof use

Dimensions: 3" wide, 4-9/16" high, 2-5/16" deep

Weight: 16 ounces with batteries (withoutAccountability Key)

Certifications:

Certified Compliant: to NFPA 1982, 2007 edition

Certified Intrinsically Safe to ANSI/UL 913: Class1, Groups C and D; and Class II, Groups E, F andG; Division 1 hazardous locations

CSA Compliant: CSA C22.2 No.157

Ingress Protection: Rated equivalent to IP67 (dusttight, effects of immersion)

Warranty - 1 year from date of purchase

FLASHING LEDsWhen in Alarm

ResonatingSound Ports

Wire AttachmentClips PASSto SCBA

LEDs Illuminatethe Case DuringSensing, Pre-Alarm& Full-Alarm Modes

Alarm Button

Reset Buttons

Protective SiliconeCover Protects PASSfrom Severe Impact,Vibration & HighTemperatures

SA-Clip ForAttaching PASSWhen UsingWithout SCBA

SuperPASSTM 3 FEATURES

NFPA 1982, 2007ed., COMPLIANT PASS

SuperPASSTM 3Accountability Key

Resistance Temperature Detector - RTD

Introducing the first temperature display that providesfirefighters with accurate feedback of the environmen-tal temperature. The rugged RTD sensor monitors thetemperature of the environment firefighters routinelyencounter. The RTD accurately senses temperaturereadings up to 1,000o F with the reading displayed ona large LED readout. Temperature information is easyto read in a dimly lit or smoke filled environment. TheRTD temperature readout can be displayed in Centi-grade or Fahrenheit. An audible warning is activatedwhen firefighters are exposed to potentially danger-ous temperatures. A time weighted average of heatexposure activates the audible heat alarm when theenvironmental conditions reach predetermined lev-els. The SuperPASSTM 3 RTD feature is available onlyon Model SP3-RTD.

Integrated Temperature DetectorSuperPASSTM 3, Model SP3-H, is available with inte-grated temperature sensing. This internal sensormonitors thermal inertia exposure. When thefirefighter exceeds a predetermined time weightedaverage temperature threshold, the audible heat alarmis activated.

Approximate response times for optional IntegratedTemperature Detector:

350o F 6 Minutes 250o F 9 Minutes

300o F 7 Minutes 200o F 12 Minutes

* Response times listed are approximate due to the vari-ance of environment factors and the thermal heat sensingsystem.

The Accountability Storage Key is an added benefitof Grace Industries SuperPASSTM 3. The clear Iden-tification Window provides the opportunity to spe-cifically identify the user through the ability to per-sonalize the keys with photos, names, numbers, de-partment ID, bar-codes, etc. The clear access windoweasily snaps into place to protect the enclosed infor-mation and provide instant access for rapid identifi-cation.

When the Accountability Key is removed,SuperPASSTM 3 turns On, and the operationalsignal is heard. A visual green LED wig-wag displayindicates that the SuperPASSTM 3 unit is in theSensing mode.

DesignSuperPASSTM 3 was designed and tested to meet thelife safety needs of firefighters. It is third party certi-fied Compliant to NFPA 1982, Standard on PersonalAlert Safety Systems (PASS), 2007 Edition.

Meets or exceeds the 2007 Edition StandardRequirements for PASS

PASSED! High Temperature FunctionalityTest: 500o F for five minutes andexceeded 95 dBA sound pressure at9.9 feet

PASSED! Heat and Immersion LeakageTest: 6 cycles; 15 minutes at 350o F andthen immersed in 64o F water, 4.9 feet deepfor 15 minutes

PASSED! Tumble - Vibration Test: Threehours at 15 rpm, for a total of 2700revolutions/drops in a four foot diametertumbling apparatus

PASSED! Muffle Test: Sound levelevaluated in all five testing positions,exceeded 95 dBA sound pressure at allpositions at 9.9 feet

Motion DetectionGrace Industries employs a NEW state of the artmethod of detecting motion. This solid-state, 3-axis

accelerometer senses a broad range of motion andis not position sensitive. This results in fewer falsealerts which are common in similar motiondetectors.

VisibilityGrace Industries specializes in integration of high in-tensity LEDs that illuminate from inside the case,causing the PASS to glow. These LEDs strobe, flashand pulsate indicating PASS status; Sensing, Pre-alert and Alarm Modes. These colors and patternsinclude those that are most easily recognized.

Sound Intensity and Sound DiscernabilityDual resonating sound cavities produce 95+dBA,making SuperPASSTM 3 the loudest NFPA CompliantStand-alone PASS available to the fire service. Moreimportant, the sound signature is designed to gener-ate multiple tones that sweep through a range of 500- 4,000 Hz. This sound signature incorporates a mo-mentary pause every 4 seconds, allowing the PASSto be identified and tracked audibly.

DurabilityGraces new generation of PASS products were re-engineered to meet the rigorous durability require-ments of the fire service. The primary function of theprotective translucent silicone cover protects thePASS from severe impact, vibration and the adverseeffects of high temperature exposure. The Radel plas-tic enclosure is a high temperature advanced poly-mer which protects the PASS from exposure to mois-ture, chemicals and other hostile agents.

Attachment MethodsTwo methods of attachment are provided for ease ofuse. The time tested wire clip easily captures andsecurely holds the PASS to SCBA straps. Or use theSA-clip that enables the end user to easily attachthe PASS to turn-out gear in a stand-alone configu-ration for use without an SCBA.

Data-LoggingThe SuperPASS 3 automatically records a data-logof all PASS status change events. The data-log isstored in non-volatile memory and can be retrievedvia the infrared port on the PASS by utilizing the Gracedata-log retrieval software. The required data-logevents are time and date stamped down to 1 secondresolution. The last 8,192 events are stored.

Two TemperatureSensing Models

Top view of SuperPASSTM 3 ShowingTemperature of the Present Environment

While in the Sensing mode, SuperPASSTM 3 may beput into Alarm at any time by manually pressingthe Alarm button located on the front surface ofthe unit.

Manual Alarm

Battery Life

Re-engineered electronics and power supply, usingfour AA batteries triples previous PASS battery life.Expect over 200 hours in Sensing Mode and 10 to 12hours in Alarm.

IDWindow

Tether

Clip, Buckle and 3 Tetherto anchor unit to fixed

storage position.

AccountabilityKey

.

.

.

.

Grace Industries, Inc.305 Bend Hill Road, Fredonia, PA 16124

Ph. 724-962-9231 Fax 724-962-3611

Front ViewwithAccountabilityKey In Place

Safety Certifications

Certified Intrinsically Safe to ANSI/UL 913: Class1, Groups C and D; and Class II, Groups E, F, andG; Division 1 Hazardous Locations.

CAUTION: Changes or modifications not expresslyapproved by the party responsible for compliancecould void the users authority to operate thisequipment.

Warranty InformationGrace Industries, Inc. warrants the Super

PASS3 to be free from defects in workmanship andmaterials for a period of one year from the date ofpurchase. This warranty is valid only when the re-turned SuperPASS3 is accompanied by a salesslip or other proof of purchase that states the dateand location of purchase. Grace Industries, Inc. willnot repair or replace any merchandise under war-ranty which has been damaged because of acci-dent, misuse or abuse of the SuperPASS3 whilein possession or control of the consumer. This war-ranty is void if any attempt to repair or replace partswas made or attempted by other than qualifiedGrace Industries, Inc. personnel. This warranty isvoid if any of the sealed compartments are openedor tampered with. Send all returned merchandise,prepaid and accompanied by proof of purchase to:Grace Industries, Inc., Repair Division, 305 BendHill Road, Fredonia, PA 16124. Grace Industries,Inc. shall not be liable for any direct, incidental orother consequential loss or damage arising out ofthe failure of the device to operate.

The sole and exclusive remedy under all guar-antees or warranties, expressed or implied, is strictlylimited to repair or replacement as herein provided.ALL IMPLIED WARRANTIES, INCLUDING BUTNOT LIMITED TO, WARRANTIES OF FITNESSAND MERCHANTABILITY, ARE HEREBY LIMITEDIN DURATION TO A PERIOD ENDING ONE (1)YEAR FROM THE DATE OF PURCHASE. The war-ranty and liability set forth in the prior paragraphsare in lieu of all other warranties, expressed or im-plied, in law or in fact, including implied warrantiesof merchantability and fitness for a particular pur-pose. Some states do not allow limitations on howlong an implied warranty lasts, so the above limita-tions may not apply to you.

This warranty gives you specific legal rights andyou may also have other rights which may vary fromstate to state.

The information contained in this booklet is be-lieved to be accurate and reliable. GraceIndustries, Inc. provides this information as a guideonly.

SuperPASS3 technical assistance isavailable by contacting Grace Industries, Inc.at 724-962-9231.

SuperPASS3 is designed to be automatically acti-vated into the Sensing Mode or turned ON when re-moved from the PASS storage position, whether it is atransportation or a fixed storage position. When removedfrom the storage position, the tether will tighten and theAccountability Storage Key will automatically pop offputting SuperPASS3 into the Sensing Mode. At thispoint, the unit can be reset (from the Alarm Mode toSensing Mode) but cannot be turned OFF until theAccountability Storage Key is replaced and both sidebuttons pressed simultaneously.

The Accountability Storage Key has an adjustabletether for ease of use. The tether can be adjusted fromapprox. 3' to 6' in length. This allows for easy utilizationwhether you are anchoring the tether to a transporta-tion position (such as to a seat in a vehicle) or a fixedstorage position (such as in the fire station). Account-ability Storage Keys are available with various lengthtethers to facilitate various operational needs.

Internal DataloggerThe internal data logging function records dates and times of the last 2,000 events. Recorded PASS events include: Power On, Pre-Alert and Lack of Motion Alarm, Manual Alarm, Reset, Power Off and Low Battery Warn-ings. The datalog information can be downloaded to a PC using the datalog-transfer software and IR Dongle available from Grace Industries.IMPORTANT: To preserve the internal date & time setting when changing batteries - batteries must be replaced within 3 minutes of removing the exhausted set.

The clear Identification Window located on the front ofthe key provides the opportunity for specific identity ofthe PASS user through the ability to personalize keyswith pictures, names, numbers, dept. ID, bar-codes, etc.The clear access window easily snaps into place to pro-tect enclosed information and provide instant accessfor quick ID. Information in the Identification Window caneasily be changed by partially popping the ID windowout with a small, flat blade screwdriver through the ac-cess slot located on the bottom of the ID window.

SUPER PASS 3 withAccountability Storage Key in Place

Pull Away Tether for Auto-OnActivation from Storage Positions

Snap hook attached to Transportation or FixedStorage Position.

Pull turnout gear away. Tether tightens and pullsAccountability Key off the PASS. This will automaticallyactivate the PASS into the Sensing Mode.

PASSattached toturnout gear

SnapHook

Changing identification informationin the Accountability Storage Key window

Push small screwdriverthrough slot on outsideof key. The Plastic I.D.window will pop out.Add I.D. informationand Snap window backin place.

EmergencyAlarmButton

Auto-On Activation

Inside Battery Cover Battery Chamber

Bottom View

AccountabilityStorage Key

WireAttachmentClip

Side View WithAccountability KeyIn Place

Sound Ports

SUPER PASS 3Features and Labeling

Grace Industries, Inc. Printed in U.S.A. P/N SUPERPASS3 0510, UI

USERS INFORMATION Only To Be Removed By End User

Front View without Accountability KeyIn Place

For training purposes a copy of this information isavailable by contacting Grace Industries, Inc.

SuperPASS3 issues may be reported at any timeto Grace Industries, Inc. at 724-962-9231. Afterworking with the manufacturer to resolve any issues,they may be reported to SEI at 703-442-5732.

Case Glows whenAccountabilityKey Pops Off

EmergencyAlarmButton

Solutions for Life Safety

Solutions for Life Safety

1. To , press both sidebuttons simultaneouslywhen Accountability Keyis Off unit.

To turn , replaceAccountability Keyand press both sidebuttons simultaneously

IdentificationWindow

Tether Attached ToA Fixed Position

SerialNumberLabel

FIGURE 1

SealingSurface

O-ring

I.D. Window

ComplianceLabel

ResetLabel

SuperPASS3

Battery Installation/ Replacement

To reduce the risk of ignition of a flammable atmosphere,batteries must only be changed in an area known to benon-flammable. To change batteries, remove the twoscrews securing the back. Remove back cover, discon-nect and dispose of the spent batteries and insert newbatteries.

Important: To preserve the internal date & timesetting, batteries must be replaced within 3 min-utes of removing the exhausted batteries.

Prior to replacing the back, apply a light coating ofsilicone grease to the O-ring. Then apply a light coat-ing of silicone grease to the inside (mating/sealing)edge of the case. As a guideline, when applying sili-cone grease to the O-ring (and case), you shouldbe able to feel grease on your fingers, and see athin film on the O-ring and sealing surface of thecase. Do not use an excessive amount of grease.Excess grease can attract dirt which could com-promise the battery compartment seal.

Line up the mating/sealing edges of the back andcase. Carefully press the back into place. Secure backby hand tightening both screws. Do not over tighten.

WARNING Always use the specified AA 1.5 volt al-kaline battery. Duracell MN1500 is recommended foroptimum performance, as other batteries may not pro-vide the same operating life. Replacing the batteriesevery six months is required unless indicated before bythe Low Battery Alarm. The Low Battery Alarm willsound when the batteries have been exhausted to 20%of capacity (indicating approx. 1 hour operating timeremains). Immediate replacement of the batteries isnecessary when the low battery alarm sounds.

When the PASS is in Sensing Mode, the low bat-tery alarm is easily recognized by an alternating dis-play of green and yellow LEDs, accompanied by aseries of two audio beep tones enunciated every 23seconds. Grace Industries, Inc. assumes no liability formechanical, electrical or other types of battery failure.Warning - substitution of components may impairintrinsic safety. After battery replacement, alwaystest SuperPASS3 to insure proper operation.

SuperPASS3SuperPASS3 Operating Instructions

SuperPASS3 is an Auto On, Personal Alert Safety System (PASS). The Auto On fea-ture insures that the SuperPASS3 is turned on Auto-matically when removed from a storage position.

When removed from a storage position, Super PASS 3Accountability Storage Key automatically pops off, acti-vating the unit into Sensing Mode (motion sensing).When the SuperPASS3 turns ON, an operational sig-nal (escalating series of loud, attention getting audiotones) will be heard, accompanied by a visual alternat-ing display of four green LEDs. The alternating displayindicates that SuperPASS3 is in the Sensing Mode. Ifthe PASS is motionless for a few seconds, the greenLEDs will cease the alternating display and flash intoopposing corners until the PASS is moved or enters Pre-Alert.

After lack of motion for approximately 18 to 23 sec-onds, the unit will go into Pre-Alert and a 12 secondsweeping Pre-Alert audio signal will be heard, accom-panied by an alternating green and yellow LED display.The longer the unit is in Pre-Alert, the louder the sweep-ing pre-alert signal becomes signifying the unit is closerto going into Alarm. When there is lack of motion forapproximately 30 to 35 seconds, the unit will go intoAlarm Mode. When in Alarm, the Pre-Alert LED dis-play is replaced by a rapid pulsing of four red LEDsaccompanied by a rapid modulated loud audio Alarmsignal. This alerts personnel in the immediate area thatassistance may be needed.

While in Sensing Mode, SuperPASS3 may be putinto Alarm at any time by manually pressing the alarmbutton located on front surface of unit. Once in alarm,the unit can be reset or returned to the Sensing Modeby simply pressing both side buttons simultaneously. Toturn SuperPASS 3 OFF, replace the AccountabilityStorage Key and press both side buttons simultaneously.

Accountability Key

An added benefit of the Grace PASS is the Account-ability Storage Key. The clear Identification Window pro-vides the opportunity for specific identity of aSuperPASS 3 user through the ability to personalizekeys with pictures, names, numbers, dept. ID, bar-codes,etc. The clear access window easily snaps into place toprotect enclosed information and provide instant accessfor quick identification should the need arise.

SuperPASS 3 should be securely attached to a ver-tical strap on the upper left or right shoulder, in thehorizontal position with the sound port facing out tothe side or on the right hip area (See Figure 1).

Each member involved in rescue, fire suppression, or other hazardous duties shall be provided with and shall use a PASS device in the hazardous area1500. All personnel should be thoroughly familiar with and trained in proper op-eration of SuperPASS 3 prior to field use. Always test SuperPASS3 prior to use. Failure to do so may expose the user to serious injury or loss of life.

LimitationsSuperPASS 3 is engineered to meet the design and

performance requirements for personal alert safety sys-tems (PASS) to be used by firefighters engaged in res-cue, fire fighting and other hazardous duties.

Failure to ensure that SuperPASS 3 is fully operational prior to use, may expose the user to serious injury or loss of life. There is no inherent guarantee against PASS failure. Even the best PASS cannot com-pensate for abuse or lack of a PASS training and mainte-nance program.

Although SuperPASS3 can be checked for properoperation, most performance properties of the PASS

cannot be tested by the end user in the field.

SuperPASS3 Maintenance

SuperPASS3 requires minimum maintenance and willprovide years of service.

Please Observe The Following Guidelines

At the end of each use, clean unit with a damp clothand warm water. Do not use cleaning solvents.

Inspect unit for signs of physical damage.

Store SuperPASS 3 in a dry, well ventilated areaconsistent with battery manufacturer requirements.Recommended storage conditions are: 50oF (10oC)to 77oF (25oC) at no more than 65 percent relativehumidity.

Units contaminated by chemical or radioactivematerials must be disposed of or decontaminated inaccordance with all applicable regulatory standards.

Replace batteries approximately every 6 months or

sooner if indicated by Low Battery Alarm.

Do not mark or apply paint to case or silicone cover.

SuperPASS 3 - Specifications

Dimensions: 3" wide by 4-9/16" high by 2-5/16" deep.

Weight: 16 ounces with batteries (w/out key).

Alarm Audio Output: 95+ dBA @9.9 feet.

Case: rugged, high temperature, impact resistant, trans-lucent, yellow colored Radel encapsulated in a durable,translucent, high-temp silicone cover. Entire case glowsduring Sensing, Pre-Alert, and Alarm Modes.

Methods of Attachment: wire attachment clip.

Sound Discernability: 6 dBA against given backgroundnoise.

Batteries: 4 Duracell MN1500, AA, 1.5 volt alkaline rec-ommended.

Battery Life: estimated at 200 hours in Sensing Mode,2 to 4 hours in ALARM Mode and approximately 6months in Standby (Storage) Mode.

Model Designation: SuperPASS3 Motion Only-Blacktriangle label below number 3. SuperPASS 3 Lack ofMotion and Temperature-Red triangle label belownumber 3.

Product Life: Approx. 3 to 7 years or longer depend-ing on fitness for use. Fitness for use is best deter-mined by the end user through a proper inspection andmaintenance program. Product should be retired fromservice when damaged or determined unfit for use.

SuperPASS 3 Visual / Audio Mode Display

OFF

- Accountability key in place with no LED display.

ON

- Accountability key removed, a series of escalat-ing, loud, attention getting audio tones.

- Followed by a green alternating LED display.

Pre-Alert

- No motion sensed for 18 - 23 seconds.

- Green and Yellow alternating LED display.

- Accompanied by a progressively louder, sweepingaudio signal between 1,000 Hz and 2,000 Hz.

Alarm

- No motion sensed for 30 - 35 seconds.

- Green alternating LED display is replaced byrapid pulsing of four Red LEDs.

- Accompanied by a rapid, modulated, loud( 95+dBA ) audio alarm.

- The alarm signal is made up of multiplefrequencies between 500Hz and 4000Hz andcycles at 5.25 seconds On and 0.75 seconds Offas an aid in determing direction when assistanceis needed.

SuperPASS3 Mode Selection

Auto-On

- From Off to Sensing Mode.

- When removed from storage position,Accountability Storage Key pops off and SensingMode is activated.

Sensing

- Green alternating LED display

- Unit is in Sensing Mode or ON.

Alarm

- Unit may be put into Alarm from the SensingMode or Off Mode at any time by pressing thebutton on front of unit.

Reset

- When in Alarm, the unit may be reset to theSensing mode by simultaneously pressing bothside buttons.

OFF

- Unit may be turned Off by replacing theAccountability key and simultaneously pressingboth side buttons.

SuperPASS3with Temperature Sensing Option

SuperPASS3 is equipped with an Integrated (in-ternal) Temperature Detector if the serial numberends in H or has a Red triangle label below thenumber 3 on front of case. You may also removethe Accountability key, press both side buttons andobserve a momentary flash of red LEDs. The se-rial number is located in the battery compartmentunder the top battery.

The Integrated Temperature Detector alarm (arapid ringing tone) should not be regarded as anabsolute measure of existing temperatures. Thetemperature alarm may sound an alarm earlier orlater with regards to integrated time/ temperaturedetection. The time variation is dependent uponwhere the unit is worn and the environmental con-ditions. When the temperature alarm threshold hasbeen exceeded by exposure to extreme environ-mental conditions, the unit will sound the tempera-ture alarm audio tone with a specific LED display.The temperature alarm sound signature is a loud,piercing, rapid chirping tone accompanied by slowpulsing of 2 alternating yellow LEDs. The tempera-ture alarm can be temporarily silenced for oneminute by pressing both side buttons simulta-neously while unit is in the sensing mode. The unitmust cool down below the temperature alarmthreshold to be silenced. SuperPASS3 and thetemperature alarm may be turned Off by replac-ing the accountability key and pressing both sidebuttons simultaneously.

Integrated Temperature Detection - ApproximateAlarm Response Times:

350F - 6 minutes 250F - 9 minutes

300F - 7 minutes 200F - 12 minutes

SuperPASSTM 3 meets or exceeds all requirements

of NFPA 1982 Standard on Personal Alert Safety Systems(PASS), 2007

Edtion.

SUPERPASS 3 Design SuperPASS 3 was designed and tested to meet the life safety needs of firefighters by Grace Industries. It is third party certified Compliant to NFPA 1982, Standard on Personal Alert Safety Systems (PASS), 2007 Edition. Meets or exceeds the 2007 Edition Standard Requirements for PASS PASSED! High Temperature Functionality Test: 500 F for five minutes and exceeded 95 dBA sound pressure at 9.9 feet PASSED! Heat and Immersion Leakage Test: 6 cycles; 15 minutes at 350 F and then immersed in 64 F water, 4.9 feet deep for 15 minutes PASSED! Tumble - Vibration Test: Three hours at 15 rpm, for a total of 2700 revolutions/drops in a four foot diameter tumbling apparatus PASSED! Muffle Test: Sound level evaluated in all five testing positions, exceeded 95 dBA sound pressure at all positions at 9.9 feet Motion Detection This solid-state, 3-axis accelerometer senses a broad range of motion and is not position sensitive. This results in fewer false alerts which are common in similar motion detectors. Visibility High intensity LEDs illuminate from inside the case causing the PASS to glow. These LEDs strobe, flash and pulsate indicating PASS status; Sensing, pre-alert and Alarm Modes. These colors and patterns include those that are most easily recognized. Sound Intensity/Discernability Dual resonating sound cavities produce 95+dBA, making SuperPASS 3 the loudest NFPA Compliant Stand-alone PASS available to the fire service. More important, the sound signature is designed to generate multiple tones that sweep through a range of 500-4000 Hz. This sound signature incorporates a momentary pause every 4 seconds, allowing the PASS to be identif ied and tracked audibly. Durability This PASS device was re-engineered to meet the rigorous durability requirements of the fire service. The primary function of the protective translucent silicone cover protects the PASS from severe impact, vibration and the adverse tic enclosure is a high temperature advanced polymer which protects the PASS from exposure to moisture, chemicals and other hostile agents. Attachment Methods Two methods of attachment are provided for ease of use. The time tested wire clip easily captures and securely holds the PASS to SCBA straps. Or use the "SA-clip" that enables the end user to easily attach the PASS to turn-out gear in a stand-alone configuration for use without an SCBA. Data-Logging The SuperPASS 3 automatically records a data-log of all PASS status change events. The data-log is stored in non-volatile memory and can be retrieved via the infrared port on the PASS by utilizing the Grace data-log

retrieval software. The required data-log events are time and date stamped down to 1 second resolution. The last 8,192 events are stored. TWO TEMPERATURE SENSING MODELS Introducing the first temperature display that provides firefighters with accurate feedback of the environmental temperature. The rugged RTD sensor monitors the temperature of the environment firef ighters routinely encounter. The RTD accurately senses temperature readings up to 1,000 F with the reading displayed on a large LED readout. Temperature information is easy to read in a dimly lit or smoke filled environment. The RTD temperature readout can be displayed in Centigrade or Fahrenheit. An audible warning is activated when firefighters are exposed to potentially dangerous temperatures. A time weighted average of heat exposure activates the audible heat alarm when the environmental conditions reach predetermined levels. The SuperPASS 3 RTD feature is available only on Model SP3-RTD. Integrated Temperature Detector SuperPASS 3, Model SP3-H, is available with integrated temperature sensing. This internal sensor monitors thermal inertia exposure. When the firefighter exceeds a predetermined time weighted average temperature threshold, the audible heat alarm is activated.

SUPERPASS 3 ACCOUNTABILITY KEY The Accountability Storage Key is an added benefit of the SuperPass 3. The clear identification window provides the opportunity to specifically identify the user through the ability to personalize the keys with photos, names, numbers, department ID, bar-codes, etc. The clear access window easily snaps into place to protect the enclosed information and provide instant access for rapid identif ication. When the Accountability Key is removed, SuperPASS 3 turns, "On", and the operational signal is heard. A visual green LED wig-wag display indicates that the SuperPASS 3 unit is in the "Sensing" mode.

, SuperPASS 3 may be put into "Alarm" at any time by manually pressing

n the front surface of the unit.

nd power supply, using four AA batteries triples previous PASS battery life.

nsing Mode and 10 to 12 hours in Alarm.

Specifications Motion Sensor: 3-axis, solid-state, accelerometer enhanced durability Activation: Auto-on with Proprietary Accountability Attachments: Two methods - Wire clip and universal "SA-clip" Silicone Cover: Rugged, Durable, High Temperature, Impact Resistant, Translucent, Protective Silicone Cover. Field replaceable. Status Display: Large 6-Character, Alphanumeric, LED read-out of PASS status and External Temperature (RTD Model Only) Alarm Audio Output: Dual resonating sound cavities produce 95+ dBA @ 10ft with Sound Discernability 6 dBA against given background noise Real Time Clock: Records accurate date and time information Data Logging: Records over 8,000 PASS status changes in a non-volatile memory with date and time log. Data is downloadable to any PC Switching: Solid-state magnetic activation Batteries: 4 Duracell MN1500, AA, 1/5 Volt Alkaline Product Life: 3 to 5 years depending on frequency of use Dimensions: 3" wide, 4-9/16" high, 2-5/16" deep Weight: 16 ounces with batteries (without Accountability Key) Case: Rugged, high temperature, impact resistant, and translucent Yellow Radel polymer, encapsulated in a protective silicone cover Certifications: Certified Compliant: to NFPA 1982, 2007 edition. Certified Intrinsically Safe to ANSI/UL 913: Class 1, Groups C and D; and Class II, Groups E, F and G; Division 1 hazardous locations. CSA Compliant: CSA C22.2 No. 157. Ingress Protection: Rated equivalent to IP67 (dust tight, effects of immersion) Warranty: One year from date of purchase. Grace Industries, Inc. - an ISO 9001 Certified Facility

HEAT OPTION TYPICAL RESPONSE

Environment Temperature Alarm Response Time

350 F 6 minutes

300 F 7 minutes

250 F 9 minutes

200 F 12 minutes

Email us for a formal quote on one of these units. Product Description Price

SuperPASS 3 motion & temperature sensing, auto on $494.95 SuperPASS 3 motion sensing only, auto on $474.95 Battery Cover SP3 (includes O-ring) $24.95

Accountability Key For use with SP3 $19.00 Silicone Cover Replacement cover for SP3 $29.95

mailto:sales@americanairworks.com?subject=Send%20me%20a%20SuperPASS%20quote,%20see%20model%20and%20my%20full%20contact%20info%20below

SUPERPASS_3SuperPass 3 User Info 5-14-10SuperPASSTM