technical data - pirelli

PIRELLI TRUCK TYRES.

TECHNICAL DATAJUNE 2012


The information contained in this manual relates to tyresdesigned exclusively for goods vehicles and/or passengervehicles. Any other applications are not permitted.

INCORRECT OR IMPROPERLY USED TYRES CAN BEDANGEROUS.

The manual has been produced in an easily understood form forinformation purposes and is not intended to be comprehensivein nature. The data given will be updated periodically.

Since the manual is intended for international use theinformation may not reflect national legislative requirementswhich must be taken into consideration.

With regard to care and maintenance it is necessary to followthe tyre manufacturer’s instructions. In particular, pleaseremember that tyres age even if they have not been used orhave only been used occasionally. Cracking of the tread andsidewall rubber, sometimes accompanied by carcassdeformation, is evidence of ageing. Old and aged tyres must bechecked by a tyre specialist to ascertain their suitability forfurther use.

If in doubt concerning the interpretation of information pleasecontact your local Pirelli representative or, alternatively thePirelli Contact Centre at the following address:

Pirelli Tyre S.p.A.Viale Sarca, 222 - 20126 Milano Italiatelefono (39)-02-6442-9487 - Fax (39)-02-6442-5859www.pirelli.com

! ATTENTION

INDEX

PRODUCT RANGE 3

TYRE MARKINGS 7

TECHNICAL TABLES LEGEND 8

TECHNICAL TABLES 9

OTHER TABLES 19

RIMS 20

LOAD AND SPEED TABLES 22

PIRELLI TYRES - TOP PERFORMANCE

Founded in 1872, Pirelli has a presence on four continents with 23 industrial sites and operates through a capillary sales net-work in over 160 countries.In line with the strategy of focusing on premium quality and “Green Performance”, Pirelli, which has always invested in researchand development, strives constantly for higher quality, better technology and lower environmental impact. Efforts towardsthese aims are also made by Pirelli Eco Technology which is focused on developing technologies to control vehicle pollutingemissions, and by Pirelli Ambiente which operates in the area of renewable energy sources.

In pursuing its objectives, Pirelli is committed to combining economic success with social responsibility. In line with an indus-trial tradition that dates back over a century, Pirelli continues to invest in international expansion projects while maintainingstrong roots in the local communities where it operates.

In the industrial vehicle tyre lines, Pirelli Tyre has progressively increased its attention on markets in emerging countries, invest-ing in Brazil, the Middle East, China and Mexico. It has also given more focus to producing tyres with higher technologicalcontent and to developing solutions and services for fleets.The goal is to achieve better mileage and higher efficiency from fuel consumption by improving resistance to rolling andincreasing eco-compatible elements in general. The renewable materials used and their durability is reflected by length of thetyre’s “first life” as well as by the number of reconstructions that can be achieved on the same carcass.

The real innovation in the range began in 2009 with the introduction of the firstSeries 01 line on “Regional” (FR:01 and TR:01) and “Trailer” (ST:01) segments.Then, in 2011, it was enhanced with three new lines designed respectively for usein critical winter conditions W:01 (winter), long distance haulage H:01 (highway)and construction vehicles G:01 (gravel, on/ off) for a total of six new treads avail-able in an astonishing 22 different sizes.The Series:01 products also bear the ECOIMPACT logo. Developed with newprofiles, structures and materials to meet the needs of professional operators,they are at the very top of the European market in terms of high mileage, lowrolling resistance (and hence high fuel economy) and respect for the environment,thanks to their low noise and the highly aromatic oil free (HAOF) materials.

All the new tyres in the 01 series have the latest generationSATT™ structure in common, the most advanced structure avail-able for producing Truck tyres which is the basis for the extra-longlife of the product, the high retreadability, the excellent even wearand the improved driving precision.At the same time, the Truck Business Unit is investing even morein terms of fleet services and solutions (Pirelli Fleet Solutions),including CQ24 International (the 24/7 roadside assistance servicein the event of tyre breakdown) and Cyber™ Fleet (a tyre pressuremonitoring system). The objective is to offer a range of high per-formance products and advanced solutions for fleets, to provideefficient and safe mobility.

1


PRODUCT SEGMENTATION

Pirelli industrial vehicle segmentation is based on the concept of severity.The classic division between “on/off-road” has been further split into different areas of use classified according to the growingseverity of the road surface on which the vehicle usually travels.The “severity” parameter has a direct effect on all tyre selection variables, both technical (materials utilised, design, etc.) andfinancial (wear, running costs, length of first life and useful life, etc.).The combination of severity and vehicle type provides optimum tyre specifications for each segment.Further details of this definition, allowing each type of use to be clearly identified, are set out in the following chart.

Plus VersionsSpecially recommended under the most extreme conditions of use: high temperatures, fully laden, difficult road conditions.

2

SEVERITY

ON

LOW SEVERITY

MEDIUM SEVERITY

HIGH SEVERITY

ON/OFF

OFF

MULTIPURPOSE

ON/OFF

+

-

PIRELLI SEGMENTATION

Products designed for vehicles used in demanding off-the-road situations on various types of surface (asphalt,track, muddy or grassy terrain, sand). Typical use of mili-tary vehicles.

Products designed for vehicles used solely on construc-tion sites, in quarries and mining operations with highly-aggressive tread-wear conditions.

Products designed for mixed use vehicles on the road,on construction sites and under slightly-aggressivetread-wear conditions.

Products designed for use on urban and suburban pas-senger vehicles in stop & go traffic conditions, low averagespeed, continual changes in the road surface (asphalt,concrete, cobblestones) and high degree of abrasion.

Products designed for medium/long-haul vehicles withslightly abrasive road surfaces, winding or mountainousroads.

Products designed for long-haul transport vehicles onmotorways or arterial roads with very low specific tread-wear conditions.

WINTERProducts designed for use over long and medium dis-tances (H and R) under critical weather conditions(below 4°C) and on snow-covered surfaces.

(i) In preparation

(ii) In preparation, available in FH55/TH25 tread pattern design

FH:01 ENERGYTM

PRODUCT RANGE

3


TH:01 ENERGYTMM+S AMARANTOTM FH88 AMARANTOTM

TH88 M+S

385/55 R 22.5 • (i) •

295/60 R 22.5 • (i) • (i) • •

315/60 R 22.5 • • • •

385/65 R 22.5 • (i) •

275/70 R 22.5 • (i) • (i) • •

305/70 R 22.5 • • • •

315/70 R 22.5 • • • •

295/80 R 22.5 • • • •

315/80 R 22.5 • • • •

FR:01 TR:01 M+S FR85 AMARANTOTM

TR85 AMARANTOTM M+S FR28 TR28 M+S FR25

245/70 R 17.5 • •

205/75 R 1 7.5 • •

215/75 R 17.5 • •

225/75 R 17.5 • •

235/75 R 17.5 • •

245/70 R 19.5 • •

265/70 R 19.5 • •

285/70 R 19.5 • •

305/70 R 19.5 • (ii) • (ii)

315/70 R 22.5 • •

295/80 R 22.5 • • • •

315/80 R 22.5 • • • •

11 R 22.5 •

12 R 22.5 • •

(i) In preparation(ii) In preparation, available in FW25 tread pattern design

4

FW:01 M+S TW:01 M+S

TR26

•

245/70 R 17.5 • (i) • (i)

205/75 R 17.5 • (i) • (i)

215/75 R 17.5 • •

225/75 R 17.5 • (i) • (i)

235/75 R 17.5 • •

385/55 R 22.5 • (ii)

315/60 R 22.5 • •

385/65 R 22.5 • (ii)

315/70 R 22.5 • •

295/80 R 22.5 • •

315/80 R 22.5 • •

PRODUCT RANGE

5


MC88 AMARANTOTM

MC85 AMARANTOTM

MC85 AMARANTOTM M+S

275/70 R 22.5 • • •

FG:01 M+S TG:01 M+S FG88 M+S TG88 M+S AP05

12.00 R 20 TT/TL • (1) • (2) [•]

12 R 22.5 • (1) • (2)

13 R 22.5 • • • •

295/80 R 22.5 • •

315/80 R 22.5 • • • •

385/65 R 22.5 •

[•] Plus version (1) Available in FG85 tread pattern design(2) Available in TG85 tread pattern design

6

TRAILER

SEMI-TRAILER

TQ99 M+S

13 R 22.5 [•]

PS22

335/80 R 20 •

365/80 R 20 •

14.00 R 20 •

[•] Diamante version

[•] Diamante version

205/65 R 17.5 •

215/75 R 17.5 •

235/75 R 17.5 •

245/70 R 17.5 •

245/70 R 19.5 •

265/70 R 19.5 •

285/70 R 19.5 •

385/55 R 22.5 •

385/65 R 22.5 • [•]

435/50 R 19.5 •

445/45 R 19.5 •

ST:01 22.5”

ST:01 19.5” MEGATRAILER

ST:01 17.5”/19.5” ST35

315/80

11.00

R

R

Nominal section width(or width code)

Constructioncode

22.5

20

Nominal rim diameter(Code)

156/150

149/146

Load indices (single / dual)

L

J

Speedsymbol

Ply rating. Indicatesdifferent versions (load

capacity/inflationpressure) of tyres

having the same sizedesignation

16PR

Manufacturer’s name

Country ofmanufacture

Mould referencenumber

Product name Tubeless marking (where applicable)

Certification ECE54

Position for operator’sown brand (where

required)

North American Department ofTransportation compliance symbol and

identification number

Supplementary servicedescription.

Load indices and speedsymbol for

specific serviceconditions

Zero Degree symbol and buffing direction indicator (where

applicable)

Compliance with the EuropeanDirective 2001/43/EC on noise

level

Tyre construction and load/pressure details forNorth America and ECE54 test pressure

Direction of rotation

Additional productinformation icons

M&S mud and snow (winter tyre marking where applicable)

TYRE MARKINGS

7

Type of constructionRegroovable marking(where applicable)

Nominal aspect ratio or series (H/S*100)


(S) SECTION WIDTH (mm)The linear distance between the outsides of the sidewalls of aninflated tyre excluding elevations due to labelling (marking), designapplication indicators, protective bands or ribs.

(H) SECTION HEIGHT (mm)Half difference between the overall diameter and the nominalrim diameter.

(OD) OVERALL DIAMETER (mm)The diameter of an inflated tyre at the outermost surface of thetread.

(Rstat) STATIC LADEN RADIUS (mm)The distance between wheel centre and road surface referring toa tyre inflated and loaded at the values shown in the table understatic conditions.

ROLLING CIRCUMFERENCE (mm)The distance covered in one complete revolution of the tyre underload and pressure conditions indicated in the tables.

(A) MINIMUM DUAL SPACING FOR TWIN FITMENTS (mmDual spacing is the distance between the centre lines of the twintyres.The “A min” values refer to tyres without chains and may also beapplied in the case of the fitment of chains for twin tyres. If chains arefitted on one tyre only, the “A min” values must be increased so thatthe sidewalls of the tyre under load do not trap the chain and beco-me damaged.

CONVERSION FACTORS

TO CONVERT FROM INTO MULTIPLY BY

mminch

inchmm

0.0393725.4

kglbs.

lbs.kg

2.20460.4536

barkg/cm2

kg/cm2

bar1.019720.98066

barlbs./sq. inch (psi)

lbs./sq. inch (psi)bar

14.50330.06895

bar kPa 100

lbs./sq. inch (psi) kPa 6.895

km/hm.p.h.

m.p.h.km/h

0.621371.60935

TECHNICAL TABLES LEGEND

8

DIMENSIONAL TABLES FOR MEDIUM/HEAVY TRUCK TYRES

Tyre size

Loadindex &speedsymbol

Tread pattern

Tyre Dimensions [mm]

Rims Minimum dualspacing [mm]

New Standard

Width(#)

Outer diameter

Staticalradius

Rolling circ.(±1%)

Max.width(#)

Max.outer

diameter

Rollingcircumf.design

TUBELESS LOW SECTION AND STANDARD 17.5”

(#) On the underlined rim of the list. (H) M+S

Tyre size


Tread pattern



New Standard

Width(#)

Outer diameter

Staticalradius

Rolling circ.(±1%)

Max.width(#)

Max.outer

diameter


TUBELESS LOW SECTION 19.5”

245/70 R 17.5 136/134 M FR85 AmarantoTM 241 798 368 2434 250 803 2406 6,75 270 TR85 AmarantoTM

H 241 801 369 2443 811 M+S 7,50 279 FW:01H 241 798 368 2434TW:01H 241 801 369 2443


H 212 763 358 2327 773 M+S 5,25 222 FW:01H 212 760 356 2318 6,75 239 TW:01H 212 763 358 2327


H 216 781 365 2382 787 M+S 6,75 246 FW:01H 216 777 364 2370TW:01H 216 781 365 2382


H 221 794 371 2422 805 M+S 6,75 254 FW:01H 221 790 369 2410TW:01H 221 794 371 2422


H 236 810 378 2471 819 M+S 7,50 271 FW:01H 236 806 376 2458TW:01H 236 810 378 2471

(#) On the underlined rim of the list.(H) M+S

245/70 R 19.5 136/134 M FR:01 244 845 392 2577 250 853 2559 6,75 270 TR:01H 244 849 394 2589 862 M+S 7,50 279

265/70 R 19.5 140/138 M FR:01 258 865 400 2638 268 881 2644 6,75 286 TR:01H 258 871 403 2657 890 M+S 7,50 295

8,25 303 285/70 R 19.5 146/144 L FR:01 275 892 411 2721 285 911 2730 7,50 309

TR:01H 275 897 413 2736 920 M+S 8,25 318 9,00 327

305/70 R 19.5 148/145 M FR:01 301 920 423 2806 309 941 2815 8,25 334 TR:01H 301 927 426 2827 950 M+S 9,00 343

9


LOAD/PRESSURE TABLES

Loadindex

Single–

dualfitment

4.50[450](65)

Load capacity per axle (kg)

Cold inflation pressure - bar [kPa] (psi)

4.75[475](69)

5.00[500](73)

5.25[525](76)

5.50[550](80)

5.75[575](83)

6.00[600](87)

6.25[625](91)

6.50[650](94)

6.75[675](98)

7.00[700](102)

7.25[725](105)

7.50[750](109)

7.75[775](112)

8.00[800](116)

8.25[825](120)

8.50[850](123)

Speedsymbol[km/h]

136 S 3590 3700 3820 3930 4040 4150 4260 4370 4480 M = 130134 G 6790 7010 7220 7440 7650 7860 8070 8270 8480140 S 4070 4210 4340 4480 4610 4740 4870 5000 M = 130138 G 7690 7950 8200 8450 8700 8950 9200 9440

146 S 4840 4980 5130 5280 5420 5570 5710 5850 6000 L = 120144 G 9030 9310 9580 9860 10130 10400 10660 10930 11200

148 S 5080 5240 5390 5550 5700 5850 6000 6150 6300 M = 130145 G 9360 9650 9930 10210 10495 10770 11050 11330 11600

Loadindex

Single–

dualfitment

4.50[450](65)



4.75[475](69)

5.00[500](73)

5.25[525](76)

5.50[550](80)

5.75[575](83)

6.00[600](87)

6.25[625](91)

6.50[650](94)

6.75[675](98)

7.00[700](102)

7.25[725](105)

7.50[750](109)

7.75[775](112)

8.00[800](116)

8.25[825](120)

8.50[850](123)

Speedsymbol[km/h]

136 S 3610 3730 3830 3940 4050 4160 4270 4370 4480 M = 130134 G 6840 7050 7260 7470 7670 7880 8080 8280 8480

124 S 2590 2680 2770 2850 2940 3030 3110 3200 M = 130122 G 4850 5020 5190 5350 5510 5680 5840 6000

126 S 2700 2800 2900 3000 3100 3200 3300 3400 M = 130124 G 5080 5280 5470 5660 5840 6030 6220 6400

129 S 2970 3070 3180 3280 3390 3490 3600 3700 M = 130127 G 5610 5810 6020 6210 6410 6610 6810 7000

132 S 3260 3370 3470 3580 3690 3790 3900 4000 M = 130130 G 6190 6400 6600 6800 7010 7200 7400 7600

10

11


385/55 R 22.5 158 L (160K) FH:01 EnergyTM 379 999 465 3027 396 1012 3018 11,75 --AmarantoTM FH88 379 1000 466 3030 1022 M+S 12,25 --

FW:01H295/60 R 22.5 150/147 L FH:01 EnergyTM 293 918 431 2782 304 940 2806 9,00 329

TH:01 EnergyTMH 293 929 436 2815 949 M+S 9,75 338 AmarantoTM FH88 293 919 432 2785AmarantoTM TH88H 293 930 436 2818

315/60 R 22.5 152/148 L FH:01 EnergyTM 313 953 446 2888 318 966 2879 9,00 344 TH:01 EnergyTMH 313 961 449 2912 976 M+S 9,75 352

FW:01H 313 958 448 2903TW:01H 313 964 451 2921

AmarantoTM FH88 313 954 446 2891AmarantoTM TH88H 313 962 450 2915

385/65 R 22.5 158 L (160 K) FH:01 EnergyTM 405 1092 3248 11,75 --AmarantoTM FH88 375 1075 497 3257 1102 M+S 12,25

FW:01H --160 K (158 L) AP05 - AP05 (+) 375 1077 498 3263

275/70 R 22.5 148/145 M FH:01 EnergyTM 280 974 2922 7,50 303 TH:01 EnergyTMH 984 M+S 8,25 311

(150/147 L) AmarantoTM FH88 274 960 446 2928AmarantoTM TH88H 274 967 449 2949

148/145 J MC85 AmarantoTM 277 968 449 2952(152/148 E) MC88 M+S AmarantoTMH 277 970 450 2959

MC85 M+S AmarantoTMH 277 970 450 2959305/70 R 22.5 152/150 L FH:01 EnergyTM 303 1008 466 3074 309 1018 3050 8,25 334

(150/148 M) TH:01 EnergyTMH 303 1016 469 3099 1028 M+S 9,00 343 AmarantoTM FH88 303 1010 467 3081AmarantoTM TH88H 303 1022 472 3117

315/70 R 22.5 154/150 L FH:01 EnergyTM 315 1012 467 3087 318 1032 3093 9,00 351 (152/148 M) TH:01 EnergyTMH 315 1012 467 3087 1042 M+S 9,75 360


FR:01 315 1016 469 3099TR:01H 315 1028 474 3135FW:01H 315 1015 470 3105TW:01H 315 1030 475 3142

295/80 R 22.5 152/148 M FH:01 EnergyTM 296 1053 490 3212 302 1062 3184 8,25 326 TH:01 EnergyTMH 296 1058 493 3227 1073 M+S 9,00 335

FR:01 295 1059 493 3230TR:01H 295 1070 498 3264


FR28 296 1059 493 3230TR28H 296 1071 498 3267FW:01H 295 1080 493 3233TW:01H 295 1066 496 3251

152/148 L FG:01H 295 1065 495 3248TG:01H 295 1070 498 3264

Tyre size


Tread pattern



New Standard

Width(#)

Outer diameter

Staticalradius

Rolling circ.(±1%)

Max.width(#)

Max.outer

diameter




in preparation

in preparation

in preparation

in preparationin preparation


12


Loadindex

Single–

dualfitment

5.00[500](73)



5.25[525](76)

5.50[550](80)

5.75[575](83)

6.00[600](87)

6.25[625](91)

6.50[650](94)

6.75[675](98)

7.00[700](102)

7.25[725](105)

7.50[750](109)

7.75[775](112)

8.00[800](116)

8.25[825](120)

8.50[850](123)

8.75[875](127)

9.00[900](131)

Speedsymbol[km/h]

158 S 6860 7070 7280 7480 7690 7890 8100 8300 8500 L = 120(160) S (9000) K = 110

150 S 5320 5480 5640 5790 5940 6100 6250 6400 6550 6700 L = 120147 G 9770 10060 10350 10630 10910 11190 11470 11750 12030 12300

152 S 5640 5810 5970 6140 6300 6460 6620 6780 6940 7100 L = 120148 G 10010 10300 10600 10890 11180 11470 11750 12040 12320 12600

158 S 6860 7070 7280 7480 7690 7890 8100 8300 8500 M = 130(160) S (9000) L = 120160 S 7150 7360 7570 7780 7980 8190 8390 8600 8800 9000 K = 110(158) S (8500)148 S 5000 5150 5300 5440 5590 5730 5880 6020 6160 6300 M = 130145 G 9210 9490 9760 10030 10290 10560 10820 11080 11340 11600 L = 120(150) S (6700) J = 100(147) G (12300) E = 70(152) S (7100)(148) G (12600)

152 S 5640 5810 5970 6140 6300 6460 6620 6780 6940 7100 M = 130150 G 10650 10960 11270 11580 11890 12200 12500 12800 13100 13400 L = 120(150) S (6700)(148) G (12600)154 S 5960 6130 6310 6480 6650 6830 7000 7160 7330 7500 M = 130150 G 10640 10960 11270 11580 11890 12190 12500 12800 13100 13400 L = 120(152) S (7100)(148) G (12600)

152 S 5730 5900 6080 6250 6420 6590 6760 6930 7100 M = 130148 G 10170 10480 10790 11090 11400 11700 12000 12300 12600 L = 120


315/80 R 22.5 156/150 L FH:01 EnergyTM 316 1076 500 3282 318 1096 3282 9,00 351(154/150 M) TH:01 EnergyTMH 316 1085 504 3309 1106 M+S 9,75 360

FR:01 316 1082 503 3300TR:01H 316 1094 508 3337


FR28 313 1082 503 3300TR28H 313 1094 508 3337

156/150 K FG:01H 316 1086 504 3312TG:01H 316 1095 508 3340FG88H 316 1087 505 3315TG88H 316 1089 506 3321

156/150 L FW:01H 316 1081 503 3303(154/150 M) TW:01H 316 1091 507 3328

Tyre size


Tread pattern



New Standard

Width(#)

Outer diameter

Staticalradius

Rolling circ.(±1%)

Max.width(#)

Max.outer

diameter




13


Tyre size


Tread pattern



New Standard

Width(#)

Outer diameter

Staticalradius

Rolling circ.(±1%)

Max.width(#)

Max.outer

diameter


TUBELESS STANDARD 22.5”


11 R 22.5 148/145 K FR25 273 1051 490 3206 282 1070 3202 7,50 305 TR26H 275 1064 495 3245 1081 M+S 8,25 314

12 R 22.5 152/148 M FR:01 288 1086 504 3312 304 1104 3306 8,25 329 TR:01H 288 1096 509 3343 1115 M+S 9,00 338

152/148 L FG85 288 1086 504 3328TG85H 288 1095 508 3340

13 R 22.5 156/150 K FG:01H 308 1126 521 3434 318 1146 3428 9,00 351 TG:01H 308 1133 524 3456 1157 M+S 9,75 360 FG88H 308 1127 522 3437TG88H 308 1131 524 3450

156/150 F TQ99 DiamH 308 1135 525 3462(154/150 G)


156 S 6450 6650 6850 7040 7240 7430 7620 7810 8000 M = 130150 G 10810 11140 11470 11800 12120 12440 12770 13080 13400 L = 120(154) S (7500) K = 110(150) G (13400)

Loadindex

Single–

dualfitment

5.00[500](73)



5.25[525](76)

5.50[550](80)

5.75[575](83)

6.00[600](87)

6.25[625](91)

6.50[650](94)

6.75[675](98)

7.00[700](102)

7.25[725](105)

7.50[750](109)

7.75[775](112)

8.00[800](116)

8.25[825](120)

8.50[850](123)

8.75[875](127)

9.00[900](131)

Speedsymbol[km/h]

14

5.00[500](73)

5.25[525](76)

5.50[550](80)

5.75[575](83)

6.00[600](87)

6.25[625](91)

6.50[650](94)

6.75[675](98)

7.00[700](102)

7.25[725](105)

7.50[750](109)

7.75[775](112)

8.00[800](116)

8.25[825](120)

8.50[850](123)

8.75[875](127)

9.00[900](131)

148 S 5080 5240 5390 5550 5700 5850 6000 6150 6300 K = 110145 G 9360 9650 9930 10210 10490 10770 11050 11330 11600152 S 5730 5900 6080 6250 6420 6590 6760 6930 7100 M = 130148 G 10170 10480 10790 11090 11400 11700 12000 12300 12600 L = 120

156 S 6350 6540 6730 6910 7100 7280 7460 7640 7820 8000 K = 110150 G 10640 10960 11270 11580 11890 12190 12500 12800 13100 13400 G = 90(154) S (7500) F = 80(150) G (13400)

Loadindex

Single–

dualfitment


Cold inflation pressure - bar [kPa] (psi) Speedsymbol[km/h]


205/65 R 17.5 FRT 129/127 J ST:01m 207 709 328 2148 213 721 2169 6,00 231 (130/130 F) 6,75 239

245/70 R 17.5 FRT 143/141 J ST:01m 240 801 365 2443 250 803 2406 6,75 270 (146/146 F) 7,50 279

215/75 R 17.5 FRT 135/133 J ST:01m 216 776 355 2367 220 779 2339 6,00 239 6,75 246

235/75 R 17.5 FRT 143/141 J ST:01m 240 801 365 2443 242 811 2431 6,75 262 (144/144 F) 7,50 271

445/45 R 19.5 FRT 160 J ST:01m 446 908 413 2751 453 911 2730 14.00 --15.00 --

435/50 R 19.5 FRT 160 J ST:01m 451 937 424 2839 456 949 2840 14.00 --15.00 --

245/70 R 19.5 FRT 141/140 J ST:01m 240 845 388 2577 250 853 2559 6,75 270 7,50 279

265/70 R 19.5 FRT 143/141 J ST:01m 269 868 397 2647 272 881 2644 7,50 295 8,25 303

285/70 R 19.5 FRT 150/148 J ST:01m 290 893 407 2724 294 911 2730 8,25 318 9,00 327

385/55 R 22.5 FRT 160 K ST:01m 379 1003 458 3038 396 1012 3018 11,75 --12,25 --

385/65 R 22.5 160 K (158 L) ST:01m 379 1074 497 3255 405 1092 3248 11,75 --ST35 Diam 375 1075 497 3257 12,25 --

AP05 375 1077 498 3263

Tyre size


Tread pattern


Rims

Minimumdual

spacing[mm]

New Standard

Width(#)

Outer diameter

Staticalradius

Rolling circ.(±1%)

Max.width(#)

Max.outer

diameter


TUBELESS TRAILER TYRES

(#) On the underlined rim of the list.(m) FRT

15



12.00 R 20 154/150 K FG85 (TT - TL) 308 1125 516 3431 319 1146 3422 8.5 B8.5 8.50V 360 20" Z 640 20 ST(156/150 G) AP05 Plus 308 1124 516 3428 1157 M+S 7.33V 346

TG85 (TT - TL)H 308 1128 518 3440 7,5 348 8.0 B8.0 8.0V 354 9.0 9.00V 366

Tyre size

Indice dicarico ecodici divelicità

PR Treadpattern


Rims

Minimumdual

spacing[mm]

Tube FlapNew Standard

Width(#)

Outer diameter

Staticalradius

Rolling circ.(±1%)

Max.width(#)

Max.outer

diameter


TUBE TYPE 20”


129 S 2940 3030 3110 3200 3280 3370 3450 3530 3620 3700 J = 100127 G 5560 5730 5890 6050 6210 6370 6530 6690 6840 7000 F = 80(130) S (3800)(130) G (7600)143 S 4330 4460 4580 4710 4840 4960 5080 5210 5330 5450 J = 100141 G 8180 8420 8660 8900 9140 9370 9610 9840 10070 10300 F = 80(146) S (6000)(146) G (12000)135 S 3520 3630 3730 3840 3940 4050 4150 4260 4360 J = 100133 G 6650 6850 7050 7250 7450 7650 7850 8050 8240143 S 4330 4460 4580 4710 4840 4960 5080 5210 5330 5450 J = 100141 G 8180 8420 8660 8900 9140 9370 9610 9840 10070 10300 F = 80(144) S (5600)(144) G (11200)160 S 7150 7360 7570 7780 7980 8190 8390 8600 8800 9000 J = 100

160 S 7150 7360 7570 7780 7980 8190 8390 8600 8800 9000 J = 100

141 S 4090 4210 4330 4450 4570 4690 4800 4920 5030 5150 J = 100140 G 7940 8180 8410 8640 8870 9100 9330 9550 9780 10000143 S 4270 4420 4570 4710 4930 5060 5190 5320 5450 J = 100141 G 8070 8350 8630 8910 9320 9570 9810 10060 10300150 S 5160 5320 5480 5640 5790 5940 6100 6250 6400 6550 6700 J = 100148 G 9710 10000 10300 10600 10890 11180 11470 11750 12040 12320 12600160 S 7150 7360 7570 7780 7980 8190 8390 8600 8800 9000 K = 110

160 S 7150 7360 7570 7780 7980 8190 8390 8600 8800 9000 L = 120(158) S (8500) K = 110

Loadindex

Single–

dualfitment

5.50[550](80)



5.75[575](83)

6.00[600](87)

6.25[625](91)

6.50[650](94)

6.75[675](98)

7.00[700](102)

7.25[725](105)

7.50[750](109)

7.75[775](112)

8.00[800](116)

8.25[825](120)

8.50[850](123)

8.75[875](127)

9.00[900](131)

9,25[925](134)

9,50[950](138)

Speedsymbol[km/h]

16

Loadindex

Single–

dualfitment

5,00[500](73)



5,25[525](76)

5.50[550](80)

5.75[575](83)

6.00[600](87)

6.25[625](91)

6.50[650](94)

6.75[675](98)

7.00[700](102)

7.25[725](105)

7.50[750](109)

7.75[775](112)

8.00[800](116)

8.25[825](120)

8.50[850](123)

8.75[875](127)

9.00[900](131)

Speedsymbol[km/h]

154 S 6050 6240 6420 6600 6780 6970 7140 7320 7500 K = 110150 G 10810 11140 11470 11800 12120 12450 12770 13080 13400 G = 90(156) S (8000)(150) G (13400)


(#) On the underlined rim of the list;(§) ECE54 standard;(°) Also for fitment with tube.

335/80 R 20 MPT 147 K PS22 Pista MPT 333 1035 478 3105 354 1076 3132 11 11SDC -- Tubeless(°)9 9SDC -- (20" Z 596) (ZD 20)12 12SDC --

149 K PS22 Pista MPT 333 1035 478 3105

365/80 R 20 MPT 149 K PS22 Pista MPT 365 1092 502 3276 374 1128 3276 11 11SDC -- Tubeless(°)12 12SDC -- (20" Z 750) (ZD 20)

152 K PS22 Pista MPT 365 1092 502 3276

14.00 R 20 ML 164/160 G 22 PS22 Pista ML 389 (§) 1245 567 3797 377 1282 3776 10,0 425 Tubeless(°)10.00V 10.00W 425 20" Z 810 U20-9,0

9,0 414

Tyre size


PR Tread pattern


Rims

Minimumdual

spacing[mm]

Tube FlapNew Standard

Width(#)

Outer diameter

Staticalradius

Rolling circ.(±1%)

Max.width(#)

Max.outer

diameter


MULTI-PURPOSE & OFF-ROAD 20”

17



Load capacityper axle [kg]

FitmentTarmac

MAX. 110 km/h

(bar) (kPa) (PSI) (bar) (kPa) (PSI) (bar) (kPa) (PSI) (bar) (kPa) (PSI)

ON-OFF MAX. 65 km/h

TRACK MAX. 25 km/h

SANDMAX. 15 km/h

Single Dual

Cold inflation pressure

Loadindex

147 6150 - 6,50 650 94 5,60 560 81 4,45 445 65 4,10 410 595960 - 6,25 625 91 5,35 535 78 4,25 425 62 3,90 390 575770 - 6,00 600 87 5,15 515 75 4,05 405 59 3,75 375 545570 - 5,75 575 83 4,90 490 71 3,90 390 57 3,55 355 515380 - 5,50 550 80 4,70 470 68 3,70 370 54 3,40 340 495180 - 5,25 525 76 4,45 445 65 3,50 350 51 3,20 320 464990 - 5,00 500 73 4,25 425 62 3,30 330 48 3,05 305 444780 - 4,75 475 69 4,05 405 59 3,15 315 46 2,85 285 41

149 6500 - 6,50 650 94 5,60 560 81 4,45 445 65 4,10 410 596300 - 6,25 625 91 5,35 535 78 4,25 425 62 3,90 390 576100 - 6,00 600 87 5,15 515 75 4,05 405 59 3,75 375 545890 - 5,75 575 83 4,90 490 71 3,90 390 57 3,55 355 515690 - 5,50 550 80 4,70 470 68 3,70 370 54 3,40 340 495480 - 5,25 525 76 4,45 445 65 3,50 350 51 3,20 320 465270 - 5,00 500 73 4,25 425 62 3,30 330 48 3,05 305 445060 4,75 475 69 4,05 405 59 3,15 315 46 2,85 285 41

149 6500 - 5,75 575 83 4,90 490 71 3,90 390 57 3,55 355 516270 - 5,50 550 80 4,70 470 68 3,70 370 54 3,40 340 496040 - 5,25 525 76 4,45 445 65 3,50 350 51 3,20 320 465810 - 5,00 500 73 4,25 425 62 3,30 330 48 3,05 305 445580 - 4,75 475 69 4,05 405 59 3,15 315 46 2,85 285 415340 - 4,50 450 65 3,80 380 55 2,95 295 43 2,70 270 395100 - 4,25 425 62 3,60 360 52 2,75 275 40 2,50 250 36

152 7100 - 6,25 625 91 5,40 540 78 4,25 425 62 3,90 390 576850 - 6,00 600 87 5,15 515 75 4,05 405 59 3,75 375 546590 - 5,75 575 83 4,90 490 71 3,90 390 57 3,60 360 526340 - 5,50 550 80 4,70 470 68 3,70 370 54 3,40 340 496090 - 5,25 525 76 4,50 450 65 3,50 350 51 3,25 325 475830 - 5,00 500 73 4,25 425 62 3,30 330 48 3,05 305 445580 - 4,75 475 69 4,05 405 59 3,15 315 46 2,90 290 425330 - 4,50 450 65 3,80 380 55 2,95 295 43 2,70 270 39

164/160 10000 18000 7,50 (*) 750 109 6,45 645 94 5,15 515 75 4,80 480 709730 17520 7,25 (*) 725 105 6,25 625 91 5,00 500 73 4,60 460 679460 17030 7,00 (*) 700 102 6,00 600 87 4,80 480 70 4,45 445 659190 16540 6,75 (*) 675 98 5,80 580 84 4,60 460 67 4,25 425 628920 16050 6,50 (*) 650 94 5,60 560 81 4,45 445 65 4,10 410 598640 15560 6,25 (*) 625 91 5,35 535 78 4,25 425 62 3,90 390 578360 15060 6,00 (*) 600 87 5,15 515 75 4,05 405 59 3,75 375 548080 14550 5,75 (*) 575 83 4,90 490 71 3,90 390 57 3,55 355 517800 14040 5,50 (*) 550 80 4,70 470 68 3,70 370 54 3,40 340 49

18

(*) Max 90 km/h

LOAD LIMITS AT VARIOUS SPEEDS

L=120 M=130 N=140 P=150 Q=160 R=170 S=180 T=190 H=210Maximum

vehicle speed[km/h]

PressureCoefficient

LIGHT TRUCK TYRES WITH LOAD INDEX <_ 121AS A SINGLE FITMENT

LOAD COEFFICIENTS

SPEED SYMBOLS

F=80 G=90 J=100 K=110 L=120 M=130Maximum

vehicle speed[km/h]

130 1,00 1,00125 1,00 1,00120 1,00 1,00 1,00115 1,00 1,00 1,00110 1,00 1,00 1,00 1,00105 1,00 1,00 1,00 1,00100 1,00 1,00 1,00 1,00 1,0095 1,01 1,01 1,01 1,01 1,0090 1,00 1,02 1,02 1,02 1,02 1,0085 1,02 1,03 1,03 1,03 1,03 1,0080 1,00 1,04 1,04 1,04 1,04 1,04 1,0075 1,025 1,055 1,055 1,055 1,055 1,055 1,0170 1,05 1,07 1,07 1,07 1,07 1,07 1,0265 1,075 1,085 1,085 1,085 1,085 1,085 1,0460 1,10 1,10 1,10 1,10 1,10 1,10 1,0655 1,11 1,11 1,11 1,11 1,11 1,11 1,0750 1,12 1,12 1,12 1,12 1,12 1,12 1,0845 1,13 1,13 1,13 1,13 1,13 1,13 1,0940 (a) (b) 1,15 1,15 1,15 1,15 1,15 1,15 1,1035 1,19 1,19 1,19 1,19 1,19 1,19 1,1130 1,25 1,25 1,25 1,25 1,25 1,25 1,1325 1,35 1,35 1,35 1,35 1,35 1,35 1,1720 1,50 1,50 1,50 1,50 1,50 1,50 1,2115 1,65 1,65 1,65 1,65 1,65 1,65 1,2510 1,80 1,80 1,80 1,80 1,80 1,80 1,305 2,10 2,10 2,10 2,10 2,10 2,10 1,40

STATIC 2,50 2,50 2,50 2,50 2,50 2,50 1,40

PressureCoefficient

TRUCK TYRES WITH LOAD INDEX >_ 122 AS A SINGLE FITMENT

LOAD COEFFICIENTS

SPEED SYMBOLS

(a) The load carrying capacity of tyres in dual fitment is twice the load carrying capacity in single up to 40 km/h;

(b)Bonus loads will not be permitted for speeds above 40 km/h if the wheel axles are rigidly fixed to the body of the vehicle.

210 1,00 1,13200 1,00 1,11190 1,00 1,00 1,08180 1,00 1,00 1,00 1,05170 1,00 1,00 1,00 1,00 1,03160 1,00 1,00 1,00 1,00 1,00 1,00150 1,00 1,00 1,00 1,00 1,00 1,00 1,00140 1,00 1,00 1,00 1,00 1,00 1,00 1,00 1,00130 1,00 1,00 1,00 1,00 1,00 1,00 1,00 1,00 1,00120 1,00 1,00 1,00 1,00 1,00 1,00 1,00 1,00 1,00 1,00115 1,0125 1,0125 1,0125 1,0125 1,0125 1,0125 1,0125 1,0125 1,0125 1,01110 1,025 1,025 1,025 1,025 1,025 1,025 1,025 1,025 1,025 1,02105 1,0375 1,0375 1,0375 1,0375 1,0375 1,0375 1,0375 1,0375 1,0375 1,04100 1,05 1,05 1,05 1,05 1,05 1,05 1,05 1,05 1,05 1,0695 1,065 1,065 1,065 1,065 1,065 1,065 1,065 1,065 1,065 1,0890 1,075 1,075 1,075 1,075 1,075 1,075 1,075 1,075 1,075 1,0985 1,085 1,085 1,085 1,085 1,085 1,085 1,085 1,085 1,085 1,1080 1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,1275 1,11 1,11 1,11 1,11 1,11 1,11 1,11 1,11 1,11 1,1470 1,125 1,125 1,125 1,125 1,125 1,125 1,125 1,125 1,125 1,1565 1,135 1,135 1,135 1,135 1,135 1,135 1,135 1,135 1,135 1,1560 1,15 1,15 1,15 1,15 1,15 1,15 1,15 1,15 1,15 1,1855 1,175 1,175 1,175 1,175 1,175 1,175 1,175 1,175 1,175 1,2250 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2545 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,2840 (a) (b) 1,25 1,25 1,25 1,25 1,25 1,25 1,25 1,25 1,25 1,3035 1,29 1,29 1,29 1,29 1,29 1,29 1,29 1,29 1,29 1,3030 1,35 1,35 1,35 1,35 1,35 1,35 1,35 1,35 1,35 1,3025 1,42 1,42 1,42 1,42 1,42 1,42 1,42 1,42 1,42 1,3020 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,3015 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,3010 1,75 1,75 1,75 1,75 1,75 1,75 1,75 1,75 1,75 1,355 1,9 1,9 1,9 1,9 1,9 1,9 1,9 1,9 1,9 1,35

STATIC 2,1 2,1 2,1 2,1 2,1 2,1 2,1 2,1 2,1 1,40

19

Please contact your Pirelli engineer for advice on the correct use of the following tables.


RIMS

DIMENSIONS (mm)Cerchio Nominal diameter

(Code) 17.5 19.5 22.5 24.5

Diameter D(mm)

A±2.5

5.256.006.757.508.259.009.75

133.5152.5171.5190.5209.5228.5247.5

DIAMETERS

Rim A±5

10.5011.7512.2513.0014.00

266.5298.5311330355.5

444.5 495.3 571.5 622.3

Rim

5.05.56.06.57.08.0

8.0 V 5°8.59.09.7510.0

14.0 V 5°

127.0 ± 3.5139.5 ± 3.5152.5 ± 3.5165.0 ± 3.5178.0 ± 3.5203.0 ± 3.5203.0 ± 3.5216.0 ± 4228.5 ± 4247.5 ± 4254.0 ± 5355.5 ± 5

28.030.533.035.538.043.044.545.548.538.051.044.5

14.015.016.518.019.021.527.023.024.024.025.527.0

33.0

37.037.042.042.043.045.5

16.5

17.517.521.021.021.523.0

Sizes A

G±1.5

R1±2.5

G±1.5

R1±2.5

DIMENSIONS (mm) BASIC OPTIONAL

Rims with detachable lateral rings are equipped with flange and bead seat removable on one side of the rim.

Nominal diameter(Code) 15 20 22 24

Diameter D(mm)

DIAMETERS

387.4 514.4 565.2 616.0

DROP-CENTRE RIMS WITH 15° TAPERED BEAD SEATS

MULTI-PIECE RIMSrims with 5° tapered bead seats

20

RIMS

Rim

4.00 B 101.6 14.0 15.04.50 B 114.3 14.0 15.05.00 B 127.0 14.0 15.05.50 B 139.7 14.0 15.06.00 B 152.4 14.0 15.04.00 C 101.6 15.9 16.84.50 C 114.3 15.9 16.84J 101.6 17.3 17.341/2 J 114.3 17.3 17.35J 127.0 17.3 17.351/2 J 139.7 17.3 17.36J 152.4 17.3 17.361/2 J 165.1 17.3 17.37J 177.8 17.3 17.371/2 J 190.5 17.3 17.36L 152.4 21.6 28.561/2 L 165.1 21.6 28.5

A±1.5 G +1.2-0.4

H min.

DIMENSIONS (mm)

Rim A G±1.5

5.00 S6.00 T7.33 V9.00 V10.00 V

127 ± 3.5152.5 ± 3.5186 ± 3.5228.5 ± 4254 ± 5

33.538444444

20.0

P max

DIMENSIONS (mm)

Nominal diameter(Code) 20 22 24

Diameter D(mm)

DIAMETERS

508.0 558.8 609.6

Nominal diameter(Code) 12 13 14 15 16 20

Diameter D(mm)

DIAMETERS

304.4 329.4 354.8 380.2 405.6 512.8

Rim

4.50 E5.00 E5.50 F6.00 G6.50 H

114.5127139.5152.5165

202022.52834

222223.531.536

A±3.5 G±1.5 P min.

DIMENSIONS (mm)

Rim A G±1.5 P min.

11

12

279.5 ± 5

127 ± 6.5

25.5

25.5

50.0

50.0

DIMENSIONS (mm)

Removable flange on this side of the rim

DROP-CENTRE RIMS WITH 5° TAPERED BEAD SEATS

FLAT BASE RIMS

21


LOAD AND SPEED TABLES

CONVERSION OF LOAD INDICES (LI)INTO LOAD CAPACITIES PER TYRE [kg and lbs]

SPEED SYMBOLS [km/h & mph]

LI kg lbs LI kg lbs

80 450 99081 462 102082 475 104583 487 107584 500 110085 515 113586 530 117087 545 120088 560 123589 580 128090 600 132591 615 135592 630 139093 650 143594 670 147595 690 152096 710 156597 730 161098 750 165599 775 1710100 800 1765101 825 1820102 850 1875103 875 1930104 900 1985105 925 2040106 950 2095107 975 2150108 1000 2205109 1030 2270110 1060 2335111 1090 2405112 1120 2470113 1150 2535114 1180 2600115 1215 2680116 1250 2755117 1285 2835118 1320 2910119 1360 3000120 1400 3085121 1450 3195122 1500 3305123 1550 3415124 1600 3525125 1650 3640

126 1700 3750127 1750 3860128 1800 3970129 1850 4080130 1900 4190131 1950 4300132 2000 4410133 2060 4540134 2120 4675135 2180 4805136 2240 4940137 2300 5070138 2360 5205139 2430 5355140 2500 5510141 2575 5675142 2650 5840143 2725 6010144 2800 6175145 2900 6395146 3000 6615147 3075 6780148 3150 6945149 3250 7165150 3350 7385151 3450 7605152 3550 7825153 3650 8045154 3750 8265155 3875 8545156 4000 8820157 4125 9095158 4250 9370159 4375 9645160 4500 9920161 4625 10195162 4750 10470163 4875 10745164 5000 11025165 5150 11355166 5300 11685167 5450 12015168 5600 12345169 5800 12785170 6000 13230

SYMBOL

km/hm.p.h.

70 80 90 100 110 120 130 140 150 160 170 180 19043 50 56 62 68 75 81 87 93 99 106 112 118

E F G J K L M N P Q R S T

22

NOTE


POWER IS NOTHING WITHOUT CONTROL

www.pirelli.com

technical data - pirelli

Documents