+150L+15 0BN.B.: The indicated values are valid for following dimensions(acc. to. DIN 15146): L = 1200 mmB = 800 mm+ 5-15Lmin. 688 d)max. 482 c)min. 308 b)max. 112 a)min. 95800min 100 Unacceptable Damages The pallet is not suitable If one of the outer deckboards is missing or broken at the corners. 1. If one of the outer stringers is missing or broken at the corners. 2. If the middle board (lower side) is missing or broken at the corners 3. If a bearer is missing or broken. 4. If a lower borad is missing or broken crosswise. 5. If nails stick out more than 2 mm on the lower side. 6. If a longitudinal board (lower side) is missing or bro-ken at the corners, -if bearers jut out in the free entry (see dimensions a, b, c and d), -if the load capacity cannot be ensured, -if the lower boards are soaked. Square Tolerances (see picture on the left) Deflection Tolerances 1. Max. deflection with nominal load with a support dis-tance of 1 000 mm: max. 10 mm 2. Concave/convex tolerance with empty pallet: max. 5 mm 3. Minimal free height between support beam and pallet cross bar when pallet is loaded (1000 kg) and with a support distance of 1000 mm: min. 85 mm 4. a, b, c, d =free entry on overall length (profile gauge) DIN 15146 The indicated values are valid for following dimensions: Length(L)=1200mm Width (B)=800mm Additional requirements Thyssenkrupp Presta Height(H)=900mm maximum (incl. pallet) Weight=1000kg maximum total weight Pallet Quality Requirements Palletquality-en.pdf