vehicle hoists catalogue - levanta€¦ · • 8-piece truck and van adapter set comes standard...

VEHICLE HOISTS CATALOGUE

When quality equipment is the benchmark, there is no better choice than Levanta...

VEHICLE HOIST CONTENTS

For further information visit: www.levanta.com.au or call 1300 577 541

TWO POST HOISTS ................................................................................................................................................................................................................................................................................ 4

FOUR POST HOISTS ............................................................................................................................................................................................................................................................................. 12

ALIGNMENT LIFTS ................................................................................................................................................................................................................................................................................ 18

PARKING STORAGE LIFTS .................................................................................................................................................................................................................................................................. 22

SCISSOR LIFTS ....................................................................................................................................................................................................................................................................................... 26

MOBILE COLUMN LIFTS .................................................................................................................................................................................................................................................................... 30

KNUCKLE LIFTS ..................................................................................................................................................................................................................................................................................... 34

IN-GROUND LIFTS .............................................................................................................................................................................................................................................................................. 10

TWO POST HOISTS

4 : TWO POST HOISTS For further information visit: www.levanta.com.au or call 1300 577 541

TWO POSTHOISTS

5VEHICLE HOISTS CATALOGUE

XPR-10• Expandable top beam accommodates narrow or

wide configuration• Single point safety release• Low profile lift pad height• Includes 8 piece truck and van adaptor set• 5 Year Limited Warranty• Adjustable width between posts

Description Narrow Configuration Wide ConfigurationLifting Capacity: 4,536 kg 4,536 kgOverall Height: 3,683 mm 3,683 mmOverall Width: 3, 353 mm 3,683 mmInside Column Width: 2,791 mm 2,921 mmMinimum Pad Height: 102 mm 102 mmMaximum Lift Height with 6” Adaptor: 2007 mm 2007 mmMotor (Standard): 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps

Technical Data

* 1Ph / 240v / 50Hz / 20 amps - option available

XPR-10A• Expandable top beam accommodates narrow or

wide configuration• Single point safety release• True asymmetric lift features 30° rotated columns

for added door-opening clearance and interior car access

• Low profile lift pad height• Includes 8 piece truck and van adaptor set• 5 Year Limited Warranty

Description Narrow Configuration Wide ConfigurationLifting Capacity: 4,536 kg 4,536 kgOverall Height: 3,683 mm 3,683 mmOverall Width: 3,353 mm 3,683 mmInside Column Width: 2,515 mm 2,845 mmMinimum Pad Height: 102 mm 102 mmMaximum Lift Height with 6” Adaptor: 2,07 mm 2007 mmMotor (Standard): 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps

Technical Data

XPR-10-XH• Bolt-on top extension for columns raises the

overhead bar an additional 24” compared with XPR-10• Expandable top beam accommodates narrow or

wide configuration• Single point safety release• Low profile lift pad height• Includes 8 piece truck and van adaptor set• 5 Year Limited Warranty


Description Narrow Configuration Wide ConfigurationLifting Capacity: 4,536 kg 4,536 kgOverall Height: 3,683 mm 4,267 mmOverall Width: 3,353 mm 3,683 mmInside Column Width: 3,208 mm 3,538 mmMinimum Pad Height: 102 mm 102 mmMaximum Lift Height with 6” Adaptor: 2,007 mm 2,007 mmMotor (Standard): 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps

Technical Data

XPR-10A-XH• Bolt-on top extension for columns raises the

overhead bar an additional 610mm compared with XPR-10A

• Expandable top beam accommodates narrow or wide configuration

• Single point safety release• True asymmetric lift features 30° rotated columns for

added door-opening clearance and interior car access• Low profile lift pad height & 8 piece adaptor set• 5 Year Limited Warranty


Technical Data * 1Ph / 240v / 50Hz / 20 amps - option available

TWO POST HOISTS


XPR-9• Adjustable width design configures for wide or

narrow installation• Single point safety release• Shorter columns for low-ceiling installations• Low profile lift and height• Includes 8 piece truck and van adaptor set• 5 Year Limited Warranty



Technical Data

XPR-9D• 4,000Kg lifting capacity• Adjustable width design configures for wide or

narrow installation• Direct-drive lifting system eliminates chains and

pulleys• Dual hydraulic lifting cylinders• Single-piece columns• Single point safety release• Drop-end arms provide a lower pad height• Triple-telescoping arms provide increased range for

lifting point access• Electric / hydraulic power system• Large 508 mm x 483 mm steel base plates• Self-lubricating dura-glide polyethylene bearing

system• Safety locks in each column spaced every 3-inches• Automatic arm restraints• Heavy-duty dual 3/8” equalizer cables with oversize

cable sheaves• 8-piece truck and van adapter set comes standard

Description DimensionLifting Capacity: 4,000 kgOverall Height: 3,683 mmOverall Width: 3,352 - 3,683 mmInside Column Width: 3,048 mmMinimum Pad Height: 101 mmRise: 1,752 mmMotor: 1Ph / 240v / 15 amps

Technical Data

XPR-7TR• Clear floor Model• Fully adjustable full-width wheel pan and fork

assemblies fit a wide array of equipment wheel configurations and help provide open access to the hydraulics, blades, reels and other components for increased shop efficiency

• Safety locks in each column spaced every 76mm• Single point safety release• 5 Year Limited Warranty

Description DimensionLifting Capacity: 3,175 kgOverall Height: (**) 3,683 mmOverall Width: 3,683 mmInside Column Width: 2,921 mmRise: 1,753 mmMotor (Standard):(*) 3Ph / 415v / 50Hz / 16 amps

Technical Data

* 1Ph / 240v / 50Hz / 20 amps - option available** Optional bolt on extension can be added to raise the overhead bar an additional 24” / 609.6mm (XPR-7TR-XH)Note: Turf attachments can be easily removed and replaced with standard swing arm assemblies (purchased separately) to convert for regular automotive and light truck service.

XPR-7TRFX• Open-Top base plate model• Fully adjustable full-width wheel pan and fork

assemblies fit a wide array of equipment wheel configurations and help provide open access to the hydraulics, blades, reels and other components for increased shop efficiency.

• Safety locks in each column spaced every 76 mm• Single point safety release• 5 Year Limited Warranty

Description DimensionLifting Capacity: 3,175 kgOverall Height: 3,683 mmOverall Width: 3,683 mmInside Column Width: 2,921 mmRise: 1,753 mmMotor (Standard):(*) 3Ph / 415v / 50Hz / 16 amps

Technical Data

* 1Ph / 240v / 50Hz / 20 amps - option availableNote: Turf attachments can be easily removed and replaced with standard swing arm assemblies (purchased separately) to convert for regular automotive and light truck service


XPR-12FD

• Open-top eliminates overhead obstruction• Drop-end arms provide a lower pad height• Dual hydraulic direct-drive cylinders• Safety locks in each column spaced every 76mm• Automatic arm restraints• 8-piece truck and van adapter set comes standard• Triple-telescoping arms provide increased range for

lifting point access• Versatile drop-in contact pads with stackable

adapters• 5 Year Limited Warranty


Description DimensionLifting Capacity: 5,443 kgOverall Height: 3,403 mmOverall Width: 3,937 mmInside Column Width: 2,997 mmMinimum Pad Height: 127 mmMaximum Lift Height with 6” Adaptor: 2,032 mmMotor (Standard):(*) 3Ph / 415v / 50Hz / 16 amps

Technical Data

* 1Ph / 240v / 50Hz / 20 amps - option available** Optional Bolt-on top extension for columns raises the overhead bar an additional 609mm compared with XPR-12C. (Order XPR12C-XH)

XPR-12C• Heavy Duty Clear Floor• Dual hydraulic ‘Direct Drive’ cylinders• Single point safety lock release• Automatic arm restraints• Truck & Van adaptors standard• 5 Year Limited Warranty


Technical Data

XPR-12C-XH

• Extended overhead height provides additional clearance for high-profile vehicles

• Padded overhead safety shut off bar• Extended height top-beam provides greater

overhead clearance• Single-point safety release• Dual direct-drive hydraulic cylinders• Dual-synchro equalization system for equal lifting• Oversized 1,346mm tall carriage for superior strength

and durability• Electric / hydraulic power system• Oversized A36 steel base plates• Self-lubricating dura-glide UHMW polyethylene

bearing system• Safety locks in each column spaced every 76mm• Automatic arm restraints• Heavy-duty 1/2” aircraft-quality equalizer cables• Oversized cable sheave diameter reduces cable

fatigue• Durable, rubber lift pads with stackable adapters• Multi-piece adapter set includes four 152mm

stackable adapters, four 76mm stackable adapters, four polyurethane contact pads and four frame cradle pads. Ideal for trucks and vans with running boards or auxiliary fuel tanks

Description DimensionLifting Capacity: 5,443 kgOverall Height: 4,876 mmOverall Width: 3,937 mmInside Column Width: 3,048 mmMinimum Pad Height: 127 mmRise: 1,752 mmMotor (Standard):(*) 3Ph / 415v / 50Hz / 16 amps

Technical Data

• Convenient storage is included for truck and van adapters

• Triple-telescoping arms provide increased range for lifting point access

• Versatile drop-in contact pads with stackable adapters

TWO POST HOISTS


XPR-15C-XH

Description DimensionLifting Capacity: 6,803 kgOverall Height: 4,876 mmOverall Width: 3,937 mmInside Column Width: 3,048 mmMinimum Pad Height: 127 mmRise: 1,752 mmMotor (Standard):(*) 3Ph / 415v / 50Hz / 16 amps

Technical Data





overhead clearance• Single-point safety release• Dual direct-drive hydraulic cylinders• Dual-synchro equalization system for equal lifting• Oversized 1,346mm tall carriage for superior strength

and durability• Electric / hydraulic power system• Oversized A36 steel base plates• Self-lubricating dura-glide UHMW polyethylene


fatigue• Durable, rubber lift pads with stackable adapters• Multi-piece adapter set includes four 152mm

stackable adapters, four 76mm stackable adapters, four polyurethane contact pads and four frame cradle pads. Ideal for trucks and vans with running boards or auxiliary fuel tanks


XPR-15C• Heavy Duty Clear Floor• Dual hydraulic ‘Direct Drive’ cylinders• Single point safety lock release• Automatic arm restraints• Truck & Van adaptors standard• 5 Year Limited Warranty


Technical Data

* 1Ph / 240v / 50Hz / 20 amps - option available** Optional Bolt-on top extension for columns raises the overhead bar an additional 24” / 609mm compared with XPR-15C. (Order XPR15-CXH)

* 1Ph / 240v / 50Hz / 20 amps - option available** Optional Bolt-on top extension for columns raises the overhead bar an additional 24” / 609mm compared with XPR-18C. (Order XPR18C-XH)

XPR-18C

• Extended height top-beam provides greater overhead clearance

• Single-point safety-lock release• Full-pivoting arms provide increased range for lifting

point access• Automatic arm restraints• Padded overhead safety-shutoff bar• Durable, rubber lift pads with stackable adaptors• Truck & Van adaptors standard• 5 Year Limited Warranty

Description DimensionLifting Capacity: 8,165 kgOverall Height: 4,318 mmOverall Width: 3,937 mmInside Column Width: 3,048 mmMinimum Pad Height: 127 mmMaximum Lift Height with 6” Adaptor: 2,032 mmMotor (Standard): 3Ph / 415v / 50Hz / 16 amps

Technical Data

XPR-18C-XH

• Multi-piece adapter set includes four 152mm stackable adapters, four 76mm stackable adapters, four polyurethane contact pads and four frame cradle pads. Ideal for trucks and vans with running boards or auxiliary fuel tanks





overhead clearance• Single-point safety release• Dual direct-drive hydraulic cylinders• Dual-synchro equalization system for equal lifting• Oversized 53” tall carriage for superior strength and

durability• Electric / hydraulic power system• Oversized A36 steel base plates• Self-lubricating dura-glide UHMW polyethylene


fatigue• Durable, rubber lift pads with stackable adapters

Description DimensionLifting Capacity 8,165 kgOverall Height: 4,876 mmOverall Width: 3,937 mmInside Column Width: 3,048 mmMinimum Pad Height: 127 mmMaximum Lift Height with 6” Adaptor: 2,032 mmMotor (Standard): 3Ph / 415v / 50Hz / 16 amps

Technical Data

IN-GROUND LIFTS

10 : INGROUND LIFTS For further information visit: www.levanta.com.au or call 1300 577 541

IN-GROUNDLIFTS


EV1020

Description DimensionLifting Capacity: 4,536 kgStroke: 1,727 mmRise Height: 1,880 mmOverall Width: 2,794 mmDrive-Thru Clearance: 2,210 mmReach: (Arm Minimum) 498 mmReach: (Arm Maximum) 1,070 mmCapacity: (Per Arm) 1,134 kgMotor: 2 hpVoltage: 3Ph / 415v / 50Hz / 16 ampsSpeed of Rise: 40 secondsAir Required: 75 - 125 psiRecommended Ceiling Height: 2,007 mm

(plus height of tallest vehicle)

Technical Data

• Providing an energy efficient lifting solution that is the leading environmentally friendly automotive lift on the market

• Equals the only real GREEN™ sustainable earth friendly lift product

• Provide stability, corrosion-resistance and a stunning showroom-like appearance

• Allows for positive ascent and descent• Provides maximum head room for working

underneath vehicles• Provide maximum arm retraction and reach to

accommodate wide body sport cars and longer wheelbase vehicles

• Accommodates wider vehicles, minimises tire pinching and provides easy drive-on

• Reach the widest range of vehicle pickup point heights reducing the need for adapters

• Provides access to all lifting components without excavation, allowing routine maintenance at surface level

• Minimise tyre damage• 5 Year Limited Warranty

EV1220 / EV1520

Description EV1220 EV1520Lifting Capacity: 5,442 kg 6,806 kgStroke: 1,727 mm 1,727 mmRise Height: 2,064 mm 2,153 mmOverall Width: 2,515 mm 1,816 mmDrive-Thru Clearance: 2,210 mm N/AReach: (Arm Minimum) 813 mm 667 mmReach: (Arm Maximum) 1,251 mm 1,092 mmCapacity: (Per Arm) 1,361 kg 1,701 kgMotor: 2 hp 2 hpVoltage: 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 ampsSpeed of Rise: 48 seconds 60 secondsAir Required: 75 - 125 psi 75 - 125 psiRecommended Ceiling Height: 2,083 mm

(plus height of tallest vehicle)2,159 mm (plus height of tallest vehicle)

Technical Data

Heavy-duty in-ground vehicle lifts are ideal for starting or expanding your commercial fleet service capabilities. Heavy-duty in-ground vehicle lifts require less shop space than surface mounted lifts, maximizing the number of service bays.

In-ground vehicle lifts are equipped with standard, medium and high extension stack adapters to accommodate a wide variety of heavy-duty vehicle lift points. Challenger heavy-duty In-ground vehicle lifts are fully contained in a recycled polymer housing to protect your investment and the environment.

With over 50% more bearing contact surface than competitor’s vehicle lifts, enhanced wipers both top and bottom and NEW larger 8-1/2” chrome pistons, your shop will have a superior, more stable and repeatable lift resulting in increased productivity.

FOUR POST HOISTS

12 : FOUR POST HOISTS For further information visit: www.levanta.com.au or call 1300 577 541

FOUR POSTHOISTS


HD-9

Description DimensionLifting Capacity: 4,082 kgOverall Length: 5,080 mmOverall Width: 2,965 mmWidth Between Columns: 2,711 mmMaximum Lifting Height: 1,892 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data

• Ideal for vehicle storage in residential garages or commercial buildings

• Two different lifting heights to choose• Adjustable lock ladders• Two different ramp lengths to choose• Features heavy-duty 3/8”aircraft cable• Runways incorporates rails for optional accessories• 5 Year Limited Warranty

* 1Ph / 240v / 50Hz / 20 amps - option available* Optional drive-thru ramps

HD-9ST• Ideal for vehicle storage in residential garages or

commercial buildings• Two different lifting heights to choose• Adjustable lock ladders• Two different ramp lengths to choose• Features heavy-duty 3/8”aircraft cable• Runways corporate rails for optional accessories• 5 Year Limited Warranty


Technical Data


HD-9STX• Ideal for vehicle storage in residential garages or

commercial buildings• Two different lifting heights to choose• Adjustable lock ladders• Two different ramp lengths to choose• Features heavy-duty 3/8”aircraft cable• Runways incorporates rails for optional accessories• 5 Year Limited Warranty


Technical Data


FOUR POST HOISTS


HD-9XW• Ideal for vehicle storage in residential garages or

commercial buildings• Two different lifting heights to choose• Adjustable lock ladders• Two different ramp lengths to choose• Features heavy-duty 3/8”aircraft cable• Runways incorporates rails for optional accessories• 5 Year Limited Warranty


Technical Data


HD-9XL• Wide drive-thru with standard lift height and long

runways• Electric / hydraulic power system• Internal “Anti-Sway” slider blocks in each column• Features heavy-duty 3/8” aircraft cable• Multi-position safety locks in each column• Single hydraulic cylinder underneath runway• Oversized self-lubricating cable rollers• Rugged 1-1/4” roller axles• Push-button pneumatic safety release


Technical Data


HDS-14• Runways incorporate rails for optional accessories• Single hydraulic cylinder mounted under runway• Longer ramps for low ground clearance vehicles• Pneumatic safety lock system• Extended 1,219mm approach ramps available• 5 Year Limited Warranty


Technical Data


HDS-14X• Runways incorporates rails for optional accessories• Single hydraulic cylinder mounted under runway• Longer ramps for low ground clearance vehicles• Pneumatic safety lock system• Extended 1,219mm approach ramps available• 5 Year Limited Warranty


Technical Data



HDS-14TL• Runways incorporates rails for optional accessories• Single hydraulic cylinder mounted under runway• Longer ramps for low ground clearance vehicles• Pneumatic safety lock system• Extended 48” approach ramps available• Extra high lift• 5 Year Limited Warranty


Technical Data


Description DimensionLifting Capacity: 6,350 kgOverall Length: 6,198 mmOverall Width/Front: 3,632 mmOverall Width/Rear: 3,301 mmWidth Between Columns/Front: 3,124 mmWidth Between Columns/Rear: 3,046 mmMaximum Lifting Height: 1,970 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data

HDSO-14• Extremely convenient open-front design for easy

access• Longer approach ramps for low ground clearance

vehicles• Runways incorporates rails for optional accessories• Automatic levelling system with multiple auto-

levelling locking positions• Multiple turn plate pockets for better wheelbase

accommodation• Fully enclosed lifting cables, safety locks, and

sheaves• Pneumatic push-button safety release• Multi-position safety locks in each column• Includes fully adjustable lock stops for precise

levelling• 5 Year Limited Warranty


HDS-18 / HDS-18X

• Super-sized 305mm diameter cable sheaves• Stainless steal lifting cables• Grease nipples• Single hydraulic under-runway cylinder• Integrated flow restrictor• Durable powder coat• Spring-loaded safety locks• Second lock system on constant guard• Fully enclosed lifting cables• Multiple adjustable height locking positions• Maintenance-free electric hydraulic power system• Conveniently positioned operator controls• 305mm x 305mm base plates• Non-skid runways• Optional rolling jacks


Description HDS-18 HDS-18XLifting Capacity: 8,165 kg 8,165kgOverall Length: 6,121 mm 8,052 mmOverall Width: 3,912 mm 3,912 mmWidth Between Columns: 3,404 mm 3,404 mmMaximum Lift Height: 1,740 mm 1,740 mmMotor (Standard): 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps

Technical Data

FOUR POST HOISTS


HDS-27 / HDS-27X

• 27,000-lb. lifting capacity• Super-sized 12” diameter cable sheaves• Stainless steel lifting cables• Grease nipples• Single hydraulic under-runway cylinder• Integrated flow restrictor• Durable powder coat• Spring-loaded safety locks• Second lock system on constant guard


Description HDS-27 HDS-27XLifting Capacity: 12,247 kg 12,247 kgOverall Length: 7,544 mm 9,068 mmOverall Width: 3,912 mm 3,912 mmWidth Between Columns: 3,404 mm 3,404 mmMaximum Lift Height: 1,740 mm 1,740 mmMotor (Standard): 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps

Technical Data

• Fully enclosed lifting cables• Multiple adjustable height locking positions• Maintenance-free electric hydraulic power system• Conveniently positioned operator controls• 12” x 12” base plates• Non-skid runways• Optional rolling jacks

HDS-35X• Extended length runways• Stainless steel lifting cables• Integrated flow restrictor• Spring-loaded safety locks• Second lock system on constant guard• Fully enclosed lifting cables• Multiple adjustable height locking positions• Maintenance-free electric hydraulic power system• 5 Year Limited Warranty

Technical Data



HDS-40X• Extended length runways (HDS40X)• Stainless steel lifting cables• Integrated flow restrictor• Spring-loaded safety locks• Second lock system on constant guard• Fully enclosed lifting cables• Multiple adjustable height locking positions• Maintenance-free electric hydraulic power system• 5 Year Limited Warranty

Technical Data


Description DimensionLifting Capacity: 18,144 kgOverall Length: 9,068 mmOverall Width: 3912 mmWidth Between Columns: 3,404 mmMaximum Lifting Height: 1,740 mmMotor: 3Ph / 415v / 50Hz / 16 amps


Set your BendPak air compressor on top of these thick, anti-vibration pads. Made from a high-quality elastomer compound, the Anti-Vibration Pads easily resist aging, compression set, water and oil. It’s a perfect low-cost solution that will save your compressor from needless wear and tear.

ANTI-VIBRATION PADS

VEHICLE HOIST ACCESSORIES

BL-PC-01

BL-140

This optional BendPak rolling oil drain holds up to 15 gallons of automotive fluid. Add it to your lift, lube rack or quick-lube pit to cleanly and efficiently perform fluid-change operations.

DP-30

This optional 6,000-lb. capacity sliding jack platform grants you the versatility and convenience you’ve been looking for. Thanks to the easy-slide design, there’s now a hassle-free way to adjust the runways of your four-post lift to accommodate different tread widths. And the precision grooves allow the jack platform to be positioned anywhere under a vehicle, making this optional sliding jack perfect for wheel and suspension work. The JP-6 is an adjustable sliding jack platform.

JP-3 / JP-6

Increase your low-rise lifting capabilities with the LR-4A Optional Arm Kit. Designed to fit BendPak low-rise lift models LR-60, LR-60P, P-6 and P-6F, these specialty arm adapters extend the pad reach of each ramp. Servicing light-duty trucks or vans has never been easier. Comes complete with 4 lifts arms and 4 rubber blocks.

LR-4A - ARM KIT

This optional two-piece, full-length middle deck platform fits all BendPak HD-9 Series lifts providing additional storage space. Lightweight aluminium construction makes removal and installation a cinch so you can gain hassle-free access to the vehicle underside whenever you need to. They also prevent potentially harmful fluids from dripping below the lift platform so you can rest easy knowing that bottom vehicles, equipment and flooring are protected from nasty spills.

HD-9 SOLID DECK OPTION

Polypropylene drip trays from BendPak are a perfect, cost-effective solution to a messy problem. Sold in packs of two, each tray comes with 56 articulated catches and gutters to restrain the fluid from sloshing out. So all that oil, coolant and other muck stays neatly contained within individual compartments, even when carried or bumped. A smart, black color hides the appearance of stains and blemishes.

PLASTIC DRIP TRAYS

Many of our customers are concerned about the air requirement for safety-lock release activation on BendPak four-post car lifts. Some consumers may not have an air compressor or worried about the added expense of purchasing one then going through the trouble of plumbing airlines etc.

That’s why BendPak developed this PATENT PENDING compressed air bottle system, allowing the lift to create its own air source each time the lift is raised. The safety-lock release system found on BendPak lifts requires 25-PSI to safely release all four locks simultaneously. The Car Lift Air Bottle Kit system from BendPak creates 150-PSI with one full lift rise--more than enough air for multiple full descents with the safety button depressed.

AIR-BOTTLE

ALIGNMENT LIFTS

18 : ALIGNMENT LIFTS For further information visit: www.levanta.com.au or call 1300 577 541

HD-9AE


Technical Data

• Wheel alignment hoist• Spring-loaded safety locks automatically engage

continuously during rise and adjustable safety ladders allow for precise runway levelling even when installed on sloped floors

• A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure

• A simple push-button pneumatic lock release makes lowering operations simple and fast

• Heavy duty turn plates and adjustable rear slip plates etc.

• 5 Year Limited Warranty


ALIGNMENTLIFTS


XR-12AE• Extended wheelbase design• Equipped with two heavy-duty truck turn plates and

full-floating rear slip plates• Turn plate pockets feature adjustable levelling bolts

for incremental turn plate levelling• Front tire stops lower out of the way for front-end

access• Electric / hydraulic power system• Approach ramps include built-in pull-out extensions

for low-to-ground vehicles


• Approach ramps employ hinges for folding and stowing

• Quad-cylinder hydraulic design provides extra power and precise levelling

• Clear centre and open front• Automatic levelling system with multiple auto-

levelling locking positions• Pneumatic push-button safety release• Dual automatic safety locks• Heavy bottom frame is a single piece

Description DimensionLifting Capacity: 5,443 kgOverall Length: 6,426 mmOverall Width: 2,235 mmRunway Width: 635 mmMaximum Lifting Height: 1,778 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data

XR-12000A• Wheel alignment hoist• Increased work space below the lift and around the

runways• Unobstructed access points for easy entry and exit

-front, rear and both sides• Up front walk through for making unhindered wheel

alignment adjustments


Description DimensionLifting Capacity: 5,443 kgOverall Length / Approach Ramps Extended: 7,531 mmOverall Length / Approach Ramps Collapsed: 7,023 mmOverall Length / Approach Ramps Stowed: 6,159 mmOverall Width: 2,184 mmWidth Between Runways: 1,028 mmMaximum Lifting Height: 1,880 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data

• Extendible, hinged, collapsible, and storable approach ramps

• 2 year Limited Warranty

HDS-14LSX• Wheel alignment hoist• Two runway lengths to choose• Heavy-duty turn plates and integrated rear slip-

plates included• Multi-position turn plate pockets• Multiple auto-levelling locking positions• Runways incorporates rails for optional accessories• Single hydraulic cylinder mounted underneath

runway

• Fully enclosed lifting cables, safety locks, and sheaves

• Internal “Anti-Sway” slider blocks in each column• Rugged 1” roller axles and oversize self-lubricating

cable sheaves• Runways adjust for different tread widths and feature

non-skid surface• 5 Year Limited Warranty



Technical Data

HDS-14LSXE• Wheel alignment hoist• Two runway lengths to choose• Heavy-duty turn plates and integrated rear slip-

plates included• Multi-position turn plate pockets• Multiple auto-levelling locking positions• Runways incorporates rails for optional accessories• Single hydraulic cylinder mounted underneath

runway* 1Ph / 240v / 50Hz / 20 amps - option available* Optional drive-thru ramps


Technical Data

• Fully enclosed lifting cables, safety locks, and sheaves

• Internal “Anti-Sway” slider blocks in each column• Rugged 1 ”roller axles and oversize self-lubricating

cable sheaves• Runways adjust for different tread widths and feature

non-skid surface• 5 Year Limited Warranty

ALIGNMENT LIFTS

20 : ALIGNMENT LIFTS For further information visit: www.levanta.com.au or call 1300 577 541

HDSO-14LSX

Description DimensionLifting Capacity: 6,350 kgOverall Length: 5,690 mmOverall Width/Front: 3,226 mmOverall Width/Rear: 3,301 mmWidth Between Columns/Front: 3,124 mmWidth Between Columns/Rear: 3,046 mmMaximum Lifting Height: 1,970 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data

• Extremely convenient open-front design for easy access

• Longer approach ramps for low ground clearance vehicles

• Runways incorporates rails for optional accessories• Automatic levelling system with multiple auto-

levelling locking positions• Multiple turn plate pockets for better wheelbase

accommodation• Fully enclosed lifting cables, safety locks, and

sheaves• Pneumatic push-button safety release• Multi-position safety locks in each column• Includes fully adjustable lock stops for precise

levelling• 5 Year Limited Warranty


KAR45

Description DimensionLifting Capacity: 4,500 kgOverall Length: 5,690 mmRunway Length: 5,000 mmCollapsed Height: 210 mmAir Operated: 4 ÷ 8 BarOil Pressure: 220 BarOil Capacity: 13 lGross Weight: 2,170 kgLifting Time: 50 secondsMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data

• From the wide O.ME.R. new vertical electro-hydraulic lift for alignment purposes which offers max. stability and preciseness during the convergence phase.

• The special frame of the lift and its four fixed joint-legs offer a perfectly firmed runway in any loading condition.

• Max. movement’s freedom under platforms and around the lift is granted from the structure without base and without connections on the floor.

• It is perfectly stable even with unbalanced loading thanks to an innovative mechanical hydraulic system. The torsion bar is now positioned within the control unit leaving the base of the lift completely free of encumbrances.

• An innovative system of shock absorber (ASO) cancels the normal flexions due to the loading avoiding mechanical stress on the legs and promoting a longer working life.

• The new KAR 45 is equipped with a platform of 5,000 mm available either in the “N” version with smooth runway than in the “CT/LT” version with front recess, rear slip plates and lift table to free up the wheels with capacity of 4,000 kg.


HDS-18A / HDS-18XA / HDS-27A / HDS-27XA / HDS-35A / HDS-35XA• Heavy Duty Wheel alignment hoist• Single hydraulic under-runway cylinder• Integrated flow restrictor• Spring-loaded safety locks• Second lock system on constant guard• Fully enclosed stainless steel lifting cables• Multiple adjustable height locking positions• Conveniently positioned operator controls• 5 Year Limited Warranty

Description HDS-18A HDS-18XA HDS-27A HDS-27XA HDS-35A HDS-35XALifting Capacity: 8,165 kg 8,165 kg 12,247 kg 12,247 kg 15,876 kg 15,876 kgOverall Length: 6,121 mm 6,121 mm 7,544 mm 9,068 mm 7,544 mm 9,068 mmOverall Width: 3,912 mm 3,912 mm 3,912 mm 3,912 mm 3,912 mm 3,912 mmWidth Between Columns: 3,404 mm 3,404 mm 3,404 mm 3,404 mm 3,404 mm 3,404 mmMaximum Lifting Height: 1,791 mm 1,791 mm 1,791 mm 1,791 mm 1,791 mm 1,791 mmMotor: 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps

Technical Data


PARKING / STORAGE LIFTS

22 : PARKING / STORAGE LIFTS For further information visit: www.levanta.com.au or call 1300 577 541

PARKING & STORAGE

LIFTS


PLT-6S• Accommodates all cars and smaller utilities• Heavy duty steel locks automatically engage at

full-rise• Manually operated lock release• Dual hydraulic lifting cylinders• Cantilevered design with lateral torsion bar

Description DimensionLifting Capacity: 2,722 kgOverall Length: 3,899 mmOverall Width: 2,497 mmOverall Height: 1,880 mmPlatform Length: 3,427 mmPlatform Width: 2,010 mmRise: 1,286 mmRamp Rise: 1,599 mmMotor: 1Ph 415V 50Hz

Technical Data

• No chains or cables• Individual, or single multi-unit power unit

configurations• 5 Year Limited Warranty

PL-7000X

Description DimensionLifting Capacity: 3,175 kgOverall Length: 4,405 mmOverall Width: 2,560 mmOverall Height: 3,327 mmRise: 2,159 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data

* 1Ph / 240v / 50Hz / 20 amps - option available* Optional audible / visual descent alarm available

• Minimum footprint allows multiple installations in limited space

• Independent lifting structures allows for staggered installation

• Overhead power unit provides smooth, quiet hydraulic operation

• Wide-deck platform accommodates pick-ups, vans and cars

• Dual synchronisation chains keeps the deck level under all conditions

• Automatic safety lock• Wide-base plate mounts directly on grade, even on

asphalt• Standard integrated key-activated power on / off

switch• 5 Year Limited Warranty

HD-7P


Technical Data


• High lift – short runways• Runways incorporates rails for optional accessories• Runways include outside guide rails• Internal “Anti-Sway’ slider blocks in each column• Push-button pneumatic safety release• 5 Year Limited Warranty

PARKING / STORAGE LIFTS

24 : PARKING / STORAGE LIFTS For further information visit: www.levanta.com.au or call 1300 577 541

HD-9SW / HD-9SWX

• Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway levelling even when installed on sloped floors.

• Multiple adjustable height locking positions for variable-height parking and infinite levelling

• A simple push-button pneumatic lock release makes lowering operations simple and fast


Description HD-9SW HD-9SWXLifting Capacity: 4,082 kg 4,082 kgOverall Length: 5,080 mm 5,690 mmOverall Width: 5,232 mm 5,232 mmWidth Between Columns: 4,877 mm 4,877 mmMaximum Lift Height: 1,956 mm 2,261 mmMotor (Standard): 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps

Technical Data

• A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure

• 5 Year Limited Warranty

HD-7PXW• High lift• Runways include outside guide rails• Electric / Hydraulic power system• High speed lifting• 5 Year Limited Warranty


Technical Data


HD-7500BL / HD-7500BLX• Two different ramp lengths to choose• Runways incorporates rails for optional accessories• Two different lifting heights to choose• Push-button pneumatic safety release• Multi-position safety locks in each column• 5 Year Limited Warranty

Description HD-7500BL HD-7500BLXLifting Capacity: 3,402 kg 3,402 kgOverall Length: 5,080 mm 5,690 mmOverall Width: 3,353 mm 3,353 mmWidth Between Columns: 3,099 mm 3,099 mmMaximum Lift Height: 1,905 mm 2,208 mmMotor (Standard): 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps

Technical Data


PL-14000• 7,000lbs capacity per deck / 14,000lbs capacity total• Perfect for cars, light trucks, motorcycles and SUV’s• May be configured as a stand-alone lift or combined

into rows of multiple units.• Wide base-plate for maximum stability• Front and rear wheel chocks• Two-position fail safe locking system• Single hydraulic cylinder with heavy-duty steel lifting

cable


Description DimensionLifting Capacity: 6,350 kgOverall Length: 4,911 mmPlatform Length: 3,928 mmOverall Width: 2,896 mmPlatform Width: 2,403 mmOverall Height: 7,120 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data

• Reliable electric-hydraulic power system• Full-width platform to keep bottom vehicles

protected• 5 Year Limited Warranty

HDS-35PX• Spring-loaded safety locks• Adjustable safety ladders• Four stainless steel lifting cables• Grease nipples on every sheave• Single hydraulic cylinder under runway• Cylinder features high-durometre rod seals and

integrated flow restrictor• Simple push-button controls

Description DimensionLifting Capacity 15,876 kgOverall Length: 11,582 mmOverall Width: 4,713 mmWidth Between Columns: 3,390 mmMaximum Lifting Height: 4,510 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data


• Aircraft quality pneumatic cylinders• Secondary lock system on constant guard• 5 Year Limited Warranty

SCISSOR LIFTS

26 : SCISSOR LIFTS For further information visit: www.levanta.com.au or call 1300 577 541

SCISSORLIFTS


LR-60

Description DimensionLifting Capacity: 2,722 kgOverall Length: 2,083 mmOverall Width: 1,791 mmLifting Height (Less lift blocks): 660 mmLifting Height (With lift blocks): 737 mmLowered Height: 102 mmMotor: 1Ph / 240v / 50Hz / 20 amps

Technical Data

• Low-Rise lift• Dual approach design allows you to load the vehicle

in either direction• Ideal for tyre rotations and brake safety inspections• Multi-position safety locks• Rubber lifting blocks included• Dropped cross bar for added clearance• 1 Year Limited Warranty

LR-60P

Description DimensionLifting Capacity: 2,722 kgOverall Length: 2,083 mmOverall Width: 1,791 mmLifting Height (Less lift blocks): 660 mmLifting Height (With lift blocks): 737 mmLowered Height: 102 mmMotor: 1Ph / 240v / 50Hz / 20 amps

Technical Data

• Low-Rise / Portable lift• Dual approach design allows you to load the vehicle

in either direction• Ideal for tyre rotations and brake safety inspections• Multi-position safety locks• Rubber lifting blocks included• Dropped cross bar for added clearance• 1 Year Limited Warranty

MD-6XP

Description DimensionLifting Capacity: 2,722 kgOverall Length: 2,057 mmOverall Width: 1,016 mmMinimum Pad Height: 121 mmLifting Height: 1,219 mm - 1,346 mmMotor: 1Ph / 240v / 50Hz / 20 amps

Technical Data

• Mid-Rise scissor lift• Perfect for servicing light-duty trucks and cars• Portable motor cart serves as tow handle to easily

move lift from bay to bay• Adjustable arm assemblies• Safety lock bar with multiple lock positions• Fast and efficient operation• Truck adapters included free of charge• 1 year Limited Warranty

SCISSOR LIFTS

28 : SCISSOR LIFTS For further information visit: www.levanta.com.au or call 1300 577 541

P-6

Description DimensionLifting Capacity: 2,722 kgOverall Length: 2,057 mmOverall Width: 457 mmLowered Height: 102 mmLifting Height (With lift blocks): 737 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data

• Pit Lift - Standard surface mount• Low-profile• Pneumatic safety lock release• Dual approach design• Electric / hydraulic power system• Hands-free safety system• Rubber lifting blocks included• Heavy-duty steel channel frame• 1 Year Limited Warranty

P-6F

Description DimensionLifting Capacity: 2,722 kgOverall Length: 1,981 mmOverall Width: 457 mmLowered Height: 102 mmLifting Height (With lift blocks): 737 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data

• Pit Lift - Flush mount• Low-profile• Pneumatic safety lock release• Dual approach design• Electric / hydraulic power system• Hands-free safety system• Rubber lifting blocks included• Heavy-duty steel channel frame• 1 Year Limited Warranty

SP-7X

Description DimensionLifting Capacity: 3,175 kgOverall Length: 4,153 mmOverall Width: 1,892 mmLowered Height: 127 mmLifting Height: 1,727 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical Data

• Full Rise scissor lift• Extendable pull-out top lift platform• Pneumatic safety locks• Equalisation torsion bar• Hardened pivot pins with “Zirk” fittings• Open centre design• Ergonomic controls• Low profile• 2 Year Limited Warranty



STRATOS - SRM / SRE

Description STRATOS SRM STRATOS SRELifting Capacity: 3,200 kg 3,500 kgOperation: Electric-Hydraulic Electric-HydraulicPlatform Length: 1,470 mm 1,470 mmLifting / Lowering: 35 / 45 seconds 35 / 45 secondLift Height: 1,945 mm 1,945 mmMotor (Standard): 1Ph / 240v / 50Hz / 20 amps 3Ph / 415v / 50Hz / 16 amps

Technical Data

• Extra-low-profile hydraulic scissor lift• Easy to handle drive-on and drive-off ramps• Hydraulic synchronisation of platforms• Overload/pressure safety-valve• Automatic lowering control• “Dead man” controls 24V• Set of 4 rubber pads• Surface mounted version as a standard• Double hydraulic system• 1 Year Warranty

STRATOS S36• Electric-hydraulic recessed scissor lift• Hydraulic synchronisation of platforms• Overload safety-valve• Safety-valve in case of sudden loss of pressure• Mechanical safety ratchet• Manual descent pump in case of power failures• “Dead man” controls 24V• Recessed installation as standard

• Set of 4 rubber pads• ‘Buzzer’ on last portion of descent• 1 Year Warranty

• Crosspieces for special vehicles• Hose extensions 2m• Single phase version• Embedding frame

Extra Options Available

STRATOS - S39 / S39 SM

• Electric-hydraulic recessed scissor lift• Hydraulic synchronisation of platforms• Overload safety-valve• Safety-valve in case of sudden loss of pressure• “Dead man” controls 24V• Set of 4 rubber pads• ‘Buzzer’ on last portion of descent• Double hydraulic system• Double volumetric cylinder under each platform• 1 Year Warranty

• Crosspieces for special vehicles• Hose extensions 2m• Single phase version• Embedding frame


Description DimensionLifting Capacity 3,600 kgOperation: Electric-HydraulicPlatform Length: 1,900 mmLifting / Lowering: 45 secondsLift Height: 1,850 mmMotor: 3Ph / 415v / 50Hz / 16 amps

Technical DataDescription STRATOS S39 STRATOS S39 SMLifting Capacity: 4,000 kg 4,000 kgOperation: Electric-Hydraulic Electric-HydraulicMounting: In-ground Mount Surface MountPlatform Length: 2,005 mm 2,005 mmLifting / Lowering: 35 / 45 seconds 35 / 45 secondLift Height: 1,900 mm 1900 mmMotor (Standard): 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps

Technical Data

MOBILE COLUMN LIFTS

30 : MOBILE COLUMN LIFTS For further information visit: www.levanta.com.au or call 1300 577 541

MOBILECOLUMN

LIFTS


BL-465EBecause 95% of commercial vehicles need 4 columns only to be lifted, LiftMax® has designed the EASY mobile column lift that will be able to satisfy most of your requirements.

You may operate the lift by means of “dead man” type push buttons or through a remote control supplied with a 10 meters long-cable.

Safe The bronze nut/acme screw system is naturally reversible, which means the lift will never drop dramatically and unexpectedly.

Reliable While other portable lifts have as many as 150 moving parts, the LiftMax® column lift has ONLY 10! Which means it’s much more reliable.

Accurate Carry out fine maintenance operations easily with LiftMax’s® excellent speed/accuracy ratio and ±25mm synchronisation.

Resilient Untwisted connecting wires offer better resistance to wear and wheel-on abuse while using mobile lifting equipment.

Flexible Work at the height you prefer for greater comfort and safety.

Sturdy Lifting forks are set to fit super single tyre rims. Fork reducers are available for cars and vans.

Versatile The low foot makes it suitable for lifting low-floored vehicles (such as buses).

Choose your lifting height

Optimum manoeuvrability

Lifting fork designed to match super single tyre type

Low foot suitable for the lifting of low floor buses

Pump it up... twice a year

Description DimensionLifting capacity: 6,500 kgTyre characteristics: 8.25-20 to 13.00 – 22.5 (Ø 962 to 1,154 mm)Stroke: 1,670 mmLifting speed: 500 mm/minElectrical power: 2,5 kwVoltage: 3Ph / 415v / 50HzFrequency: 50 hNet weight: 355 kg/columnNoise level: < 70 dB

Technical Data

MOBILE COLUMN LIFTS

32 : MOBILE COLUMN LIFTS For further information visit: www.levanta.com.au or call 1300 577 541

BL-475EW - Wireless mobile column lifts 7.5 t

Description DimensionLifting Capacity: 7,500 kgTyre: from 960 to 1155 mmSafety: Ratchet with only 2.5 mm stepMotor: 1.8kWBattery: 2 x 12V - 100AhPower: Electronic 3-Step charger

1Ph / 240v / 50HzProtection Level: IP54Noise Level: < 70 dB

Technical Data

• All columns are identical• Fast, easy commissioning• One emergency push button and battery switch per

column• Light weight (400 kg)• Lifting speed from 790 up to 1090mm/min and low

speed mode for more accuracy• Smooth Iso-leveling by automatic speed variation

(+/- 10 mm)• Lifting cycles before battery loading : 20 at 7.5 tonnes

and up to 30 with low load

• Up to 8 columns in a set• Up to 10 sets in a workshop• Safe communication network• Emergency mode : possibility to plug network cables

between columns• Safety device and clamping cone on each column


Trailer beam

Fork reducer for cars - Capacity 2 tonnes. Wheel diameter 500 to 730 mm

Fork reducer for vans - Capacity 4 tonnes. Wheel diameter 600 to 930 mm

Lifting beam for bus and coach

Plastic cover protection for intensive use in wash bays

Small axle stands - Capacity 14 tonnesTall axle stands - Capacity 10 tonnes

BL-PC

BL-100 BL-140

BL-LB

BL-FRV-01

BL-FRC-01

BL-TBMOBILE COLUMN LIFTS ACCESSORIES

KNUCKLE LIFTS

34 : KNUCKLE LIFTS For further information visit: www.levanta.com.au or call 1300 577 541

KNUCKLELIFTS


KAR 250 SERIES• Completely clear work area for the operator due to

the leg design and structure of the lift • No mechanical connection between the platforms• The runway has been designed to accommodate the

use of rolling jacking beams• Embossed anti-slip finish on all platform surfaces

maximum safety for all lifting / lowering operations• Available for surface mount or flush mount

Installation• Mechanical lock on each lifting cylinder • Burst valve on each lifting cylinder • Runway levelling controlled by photo sensors• Acoustic warning and by pass key when lift reaches

500mm from lowered position • Dead man control

Description KAR 250 - 9 KAR 250 - 9DT KAR 250 - 9F KAR 250 - 10 KAR 250 - 10DT KAR 250 - 10F KAR 250 - 11 KAR 250 - 11DT KAR 250 - 11F KAR 250 - 10 TWIN KAR 250 - 10 TWIN DT KAR 250 - 10 TWIN FLifting Capacity: 25,000 kg 25,000 kg 25,000 kg 25,000 kg 25,000 kg 25,000 kg 25,000 kg 25,000 kg 25,000 kg 25,000 kg 25,000 kg 25,000 kgLifting Height: 1,760 mm 1,760 mm 1,760 mm 1,760 mm 1,760 mm 1,760 mm 1,760 mm 1,760 mm 1,760 mm 1,760 mm 1,760 mm 1,760 mmRunway Length: 9,000 mm 9,000 mm 9,000 mm 10,000 mm 10,000 mm 10,000 mm 11,000 mm 11,000 mm 11,000 mm 10,000 mm X 2 10,000 mm X 2 10,000 mm X 2Collapsed Height: 360 mm 360 mm 360 mm 360 mm 360 mm 360 mm 360 mm 360 mm 360 mm 360 mm 360 mm 360 mmAir Operated: 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 BarOil Pressure: 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 BarOil Capacity: 50 l 50 l 50 l 50 l 50 l 50 l 50 l 50 l 50 l 50 l 50 l 50 lGross Weight: 7,000 kg 7,000 kg 7,000 kg 7,000 kg 7,000 kg 7,000 kg 7,000 kg 7,000 kg 7,000 kg 7,000 kg 7,000 kg 7,000 kgLifting Time: 70 seconds 70 seconds 70 seconds 70 seconds 70 seconds 70 seconds 70 seconds 70 seconds 70 seconds 70 seconds 70 seconds 70 secondsMotor: 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW

Technical Data

• Jacking beams• Lighting kit• Hot dip galvanisation• Automatic pit cover plate


KNUCKLE LIFTS

36 : KNUCKLE LIFTS For further information visit: www.levanta.com.au or call 1300 577 541

KAR 350 SERIES• Completely clear work area for the operator due to

the leg design and structure of the lift • No mechanical connection between the platforms• The runway has been designed to accommodate the

use of rolling jacking beams• Embossed anti-slip finish on all platform surfaces

maximum safety for all lifting / lowering operations• Available for surface mount or flush mount

installation• Mechanical lock on each lifting cylinder • Burst valve on each lifting cylinder • Runway levelling controlled by photo sensors• Acoustic warning and by pass key when lift reaches

500mm from lowered position • Dead man control

Description KAR 350 - 9 KAR 350 - 9DT KAR 350 - 9F KAR 350 - 10 KAR 350 - 10DT KAR 350 - 10F KAR 350 - 11 KAR 350 - 11DT KAR 350 - 11F KAR 350 - 10 TWIN KAR 350 - 10 TWIN DT KAR 350 - 10 TWIN FLifting Capacity: 35,000 kg 35,000 kg 35,000 kg 35,000 kg 35,000 kg 35,000 kg 35,000 kg 35,000 kg 35,000 kg 35,000 kg 35,000 kg 35,000 kgLifting Height: 1,790 mm 1,790 mm 1,790 mm 1,790 mm 1,790 mm 1,790 mm 1,790 mm 1,790 mm 1,790 mm 1,790 mm 1,790 mm 1,790 mmRunway Length: 9,000 mm 9,000 mm 9,000 mm 10,000 mm 10,000 mm 10,000 mm 11,000 mm 11,000 mm 11,000 mm 10,000 mm X 2 10,000 mm X 2 10,000 mm X 2Collapsed Height: 390 mm 390 mm 390 mm 390 mm 390 mm 390 mm 390 mm 390 mm 390 mm 390 mm 390 mm 390 mmAir Operated: 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 Bar 4 ÷ 8 BarOil Pressure: 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 Bar 220 BarOil Capacity: 50 l 50 l 50 l 50 l 50 l 50 l 50 l 50 l 50 l 50 l 50 l 50 lGross Weight: 8,000 kg 8,000 kg 8,000 kg 8,000 kg 8,000 kg 8,000 kg 8,000 kg 8,000 kg 8,000 kg 8,000 kg 8,000 kg 8,000 kgLifting Time: 80 seconds 80 seconds 80 seconds 80 seconds 80 seconds 80 seconds 80 seconds 80 seconds 80 seconds 80 seconds 80 seconds 80 secondsMotor: 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW 400v / 3/50Hz / 7.5kW

Technical Data

• Jacking beams• Lighting kit• Hot dip galvanisation• Automatic pit cover plate


V E H I C L E H O I S T S C A T A L O G U E

Queensland • New South Wales • Australian Capitol Territory • Victoria • South Australia • Western Australia • Tasmania • Northern Territory

Telephone: 1300 577 541

Fax: 1300 677 643

Email: [email protected]

Web: www.levanta.com.au

Head Office: 17 Canberra Street, Hemmant QLD 4174

NSW Office: 89 Gascoigne Street, Kingswood NSW 2747

WA Office: 9 Beete Street, Welshpool WA 6106

vehicle hoists catalogue - levanta€¦ · • 8-piece truck and van adapter set comes standard...

Documents