y parametric gwent deck card cases - prusaprinters · the deck holder was designed in openscad and...
TRANSCRIPT
Summary
With the Witcher Netflix series, I recently got back into the games andrediscovered Gwent. I wanted to play with friends (as opposed to the AI)and didn't like the changes made to the standalone game. While CDProjekt Red did release some IRL Gwent cards, they are relatively hard tofind (at least in the US), so wound up with some very professional lookingfanmade reproductions. While satisfying my urge, I now had ~400 physicalcards to store. I assumed it would be easy to find 5 inexpensive ~80 carddeck cases that were color-coded or otherwise easy to differentiate foreach faction. I was wrong, and most everything in the space wasextremely expensive, with multiple downsides like potentially not fittingmy cards, being bulky, etc.
So... I decided to roll my own.
Please post your makes, remixes, and criticisms. This is one of my firstground-up projects, and know I probably messed up half a dozen ways Idon't even realize.
The above is printed in a variety of color PLAs (mostly Overture andHatchbox) with the boxes at .15mm off my modified Prusa MK3 inside areinforced LACK enclosure v1 with default PrusaSlicer PLA settings. Theyare finished with light sanding at 220 then 400 grit. Each top takes ~6hours, and each bottom ~5. The dividers are printed at 0.10mm ~45minutes each. These should be relatively easy prints, the biggest printingissue I had was first layer adhesion.
T Tillin9
Parametric GwentDeck Card Cases
VIEW IN BROWSER
updated 26. 2. 2020 | published 26. 2. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
129.8 KBupdated 26. 2. 2020
165.0 KBupdated 26. 2. 2020
While there are various versions of the Gwent faction logos - I couldn't finda set of vector art that I liked - yes, you're probably sensing a pattern. ;)For example, I like the original Northern Reals and Scoia'tail and not theredesign for the standalone game. Skellige is also difficult since it wasn'tdesigned to be flat like the other 4 but raised. I scanned the backs frommy cards and traced them in Inkscape to get my set. I also did a fair bit ofediting and used artistic license to get something that met my aestheticsand I knew would print well.
The deck holder was designed in OpenSCAD and should be extensible toany CCG by altering the card size and swapping (or disabling) the artwork,just make sure the card size and thickness on both .scad files are the sameor they won't fit together. If being printed on a machine with poortolerances, and the boxes are hard to open, some slop may need to beadded to the card size for the top. If the artwork used has a cutout (likeNilfgaard) it is possible to print the top divider and glue. I liked the look, soI used this on all of mine. Just a note, to use SVGs, OpenSCAD 2019.05 ornewer is needed. With PLA, I found a thickness of 2mm was sufficient tosurvive a drop test from table height (~1m), but higher drops would crackthe edges of the top and cause the holder to come apart. The height canbe adjusted based on the size of the target deck and single sleeved versusdouble-sleeved cards.
Hobby & Makers > Organizers
witcher protector gwent game deck collectable case
card
deck_bottom.3mf
deck_top_northern_realms.3mf
211.6 KBupdated 26. 2. 2020
153.7 KBupdated 26. 2. 2020
263.7 KBupdated 26. 2. 2020
204.1 KBupdated 26. 2. 2020
32.3 KBupdated 26. 2. 2020
31.8 KBupdated 26. 2. 2020
1.7 KBupdated 26. 2. 2020
5.0 KBupdated 26. 2. 2020
7.2 KBupdated 26. 2. 2020
deck_top_nilfgaard.3mf
deck_top_skellige.3mf
deck_top_monsters.3mf
deck_top_scoiatael.3mf
locking_divder.3mf
top_divder.3mf
deck_top.scad
deck_bottom.scad
northern_realms.svg
11.4 KBupdated 26. 2. 2020
7.5 KBupdated 26. 2. 2020
12.5 KBupdated 26. 2. 2020
9.3 KBupdated 26. 2. 2020
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
nilfgaard.svg
skellige.svg
monsters.svg
scoiatael.svg