y7. bill of quantities 20 jan

Section 7

Bill of Quantities

PREAMBLE

1 The Bill of Quantities shall be read in conjunction with Instructions to Bidders, General

and Special Conditions of Contract, Invitation for Bid, Technical Specifications and

Drawings.

2 Bill of Quantities(B.O.Q) comprises of Item rate Bill of Quantities consists of various

works related to ISBT, K. Gate , Civil works, Electrical works, fire fighting works, HVAC

works, Sanitary and plumbing works, Parking management, security system, finishing

works, drainage works, landscaping works & other miscellaneous works to be executed

on item rate basis. The bidder has to quote the rate (in words and figures) against each

item(for which quantity is given) in B.O.Q. The payment shall be made as per the

quantum of work executed at the rates quoted by Contractor for individual BOQ item.

Contractor will have no right for any claims whatsoever like loss of profit etc.in case the

actual quantum of work executed against any BOQ item is less than the quantities given

in BOQ. In case of increase in quantities beyond BOQ provisions, rate revision shall be

affected as per the provisions in conditions of contract and appendix to bid.

3 The quoted rates and prices in Priced Bill of Quantities will be deemed to include all plant,

labour, supervision, materials, transport, all temporary works, erection, maintenance,

taxes and duties, contractor‟s profit and establishment/overheads, together with

preparation of design and drawings, all general risks, insurance liabilities, compliance of

labour laws and obligations set out or implied in the contract.

4 If the bidder fails to quote rate against any item(for which quantity has been provided) in

bill of quantities, the same will not be paid for by employer when executed and shall be

deemed to have been included by the bidder in the rates and prices for other items in the

bill of quantities.

5 General directions and descriptions of work and materials are not necessarily repeated,

nor summarized in the Unit Priced Bill of Quantities. Reference to the relevant sections of

the contract documentation including technical specifications shall be made before

entering prices against each item in the Unit Priced Bill of Quantities.

6 Bidders shall fill the Unit Priced Bill of Quantities in Rupees only.

7 Errors will be corrected by the employer for any arithmetic errors in computation or

summation as per contract conditions.

8 All the unit rates should be filled both in figures and words and amounts should be filled in

figures only.

Transport department NCT of Delhi 7 - 1

9 All columns in the Bill of Quantities shall be filled in indelible ink or type written and the

total tender amount shown in the bottom. The person authorized to sign on behalf of the

Bidder shall sign in full with company seal and date at the bottom of all pages and at the

end of summary sheet B.O.Q. Any corrections shall be made by clearly striking out the

previous data, writing the correct figure/data and putting signature of the authorized

signatory at the place of correction. Use of correction fluid is not allowed.

10 The works executed against the BOQ items would be paid on measurement basis.

11 The payment under the Payment Schedule will cover all work specified in the tender

drawing and / or provided in the scope of work. The Schedule of Payment will not get

modified due to alterations of any type so far as the modifications/alterations are within

the scope of work and/or provided for in the tender drawings.

12 The Contractor may raise their „On Account‟ payments on monthly basis as per the status

of work on the last day of the respective month.

Transport department NCT of Delhi 7 - 2

Abbreviations For

Rs or RS : Indian Rupees

LS or L.S or SUM : Lump Sum

Nr. or No. or Nos. : Number(s)

Lm or LM or lm : Linear Metre

M : Metre

KM or km : Kilometre

Hct. Or Hct : Hectare

m² or sq.m or sqm : Square Metre

m³ or cum or cu.m or Cum : Cubic Metre

cc. or c3 or cu.cm or cucm : Cubic Centimetre

cum. Km. Or cum km : Cubic Metre Kilimetre

KG or kg or Kg : Kilogram

mt or t or T or tone : Metric Tonne

HP : Horse Power

IRC : Indian Roads Congress

IS : Indian Standard

P.O.L. or POL : Petroleum, Oil & Lubricants

Bill of Quantities

ABBREVIATIONS

Transport Department NCT of Delhi 7 - 3

Abstract of Cost

S.NO. SUB-HEAD

In figures In words

I. Civil Works

2 INTERNAL ELECTRICAL

3 SUBSTATION AND DG

4 HVAC

5 PLUMBING,WATER SUPPLY AND SANITARY

6 FIRE FIGHTING

7 ESCALATOR

8 LIFT

9 BMS System

10 P.A SYSTEM

NAME OF WORK :- Upgradation/Renovation of Inter-state Bus Terminal at Kashmere Gate in NCT of Delhi

ABSTRACT OF COST

Amount in (Rs.)

Transport Department NCT Of Delhi 7 - 4

Abstract of Cost

S.NO. SUB-HEAD

In figures In words

Amount in (Rs.)

11Security System including ,CCTV servillance

system,

12

Parking management system,Boom barrier,Gate

access system,toll collection system,access

control system

13Passenger Information system, Display boards,

LCD TV Screen system, Digital Signages

14 soft Landscaping work

15 Signages

Sub Total -

Rebate/Discount offered if any -

Total tender sum after Rebate

(1) in figure

(2) in words

(Authorised Signatory with Company Seal)


Abstract Of Civil Items

S.NO. SUB-HEAD

In figures In words

I. DISMANTALLING & DEMOLISHING

II. EARTH WORK

III. CONCRETE WORK

IV. R.C.C WORK

V. BRICK WORK

VI. MARBLE WORK

VII. WOOD WORK

VIII. STEEL WORK

IX. FLOORING

UpGradation/Renovation OF INTER STATE BUS TERMINAL AT KASHMERE GATE, DELHI

ABSTRACT OF COST FOR CIVIL WORKS

Amount in (Rs.)


Abstract Of Civil Items

X. FINISHING

XI. ALUMINIUM WORK

XII. WATERPROOFING WORK

XIII. EXTERNAL DEVELOPMENT:-

SUB TOTAL :-


BOQ Civil Works

In Figures In Words

1.00 SUB-HEAD: 1 : DISMANTALLING &

DEMOLISHING (REF. DRG. NO.)

1.01 Dismantaling manually / by mechanical means

including disposal of serviceable and

unserviceable material out of the site to

contractor own dump as per direction of Engineer

in charge.a) Bituminous Road

14310 Cum

b) Water Bound Macadam under road

50 Cum

c) CC Kerb Stone

3410 Cum

e) RCC Work

400.00 Cum

f) Stone Masonry

100.00 Cum

g) Brick work

700.00 Cum

h) Kota stone/ Tile flooring

500.00 Sqm

Bill OF QTY Civil works

Rate in (RS.)

Sr. Description. Qty Unit. Amount ( Rs.)


BOQ Civil Works

In Figures In Words Sr. Description. Qty Unit. Amount ( Rs.)

i) Steel work in built up section

3000.00 Kg

j) Malba, Building rabihs,removal

200.00 Cum

k) Cement Plaster

500.00 Sqm

l) Cables,conduts, pipes of all dia on surface

500.00 Rmt

m) All Electrical fixtures

500.00 No

1.02 Dismantaling manual / by mechanical means

including disposal of serviceable and

unserviceable following existing structure out side

the Main Building to contractor own dump as per

direction of Engineer in charge. (Ref. Drg. No.

EX/A-01, EX/A-02,EX/A-03)

Note:- The description of structures in drawing is

for reference only. Contractor must see the site

condition before quoting. Contractor could be

asked to demolish these structures at different

times and possibly in parts. Nothing extra shall be

claimed by him on this account.


BOQ Civil Works


Structure No (Ref. Drg. No. EX/A-01).:-

1- Gate House & Police Post

1 L/S

2- Toilet including all fixtures, fittings & Pipes etc

complete. 1 L/S

3-Pump House1 L/S

4-Wastage stack Room1 L/S

5-Toilet including all fixtures, fittings & Pipes etc

complete. 1 L/S

6-Fountain

1 L/S

7-UG Tank1 L/S


complete. 1 L/S

9-As Marked

1 L/S


complete.1 L/S


BOQ Civil Works


11- Toilet including all fixtures, fittings & Pipes etc

complete. 1 L/S

12- Pump House & Sump1 L/S


complete. 1 L/S

INSIDE THE MAIN BUILDING (Ref. Drg. No.

EX/A-02) :-


complete. 1 L/S

15-ROOM.

1 L/S


complete. 1 L/S


complete. 1 L/S


BOQ Civil Works



complete. 1 L/S


complete.

20-Open RCC Stair

1 L/S

Structure No (Ref. Drg. No. EX/A-03).:-

21-Interiors of toilet partition, fixture, piping etc.

1 L/S

22-RCC shaft

1 L/S

23-Counter1 L/S

24-stair case

1 L/S


complete. 1 L/S


BOQ Civil Works


1.03 Making holes of required size / shape / design in

R.C.C. wall at designated locations including

cutting of steel reinforcement & finishing the

edges smooth with cement mortar 1:3 (1 cement

: 3 coarse sand) and / or plugging the open space

alround sleeves / puddle flanges with C.C. 1:1.5 :

3 mixed with approved water proofing compound

etc. all complete.

a) For size of openings beyond upto 0.5 x 0.5

metre or 0.5 metre dia.24.00 Each

TOTAL CARRIED OVER TO ABSTRACT OF

COST Sh 1


BOQ Civil Works


2.00 SUB-HEAD: II: EARTH WORK:-

NOTE:-

Dewatering system:-The water table at site of

work is high .To carry out excavation in dry

condition as well as to ensure that there is

enough downward load from the structure to

counter the uplift due to high water pressure

continious dewatering shall be done. A

specialised agency shall be engaged by the

contractor to do contineous dewatering (The

specialised agency for dewatering system

shall be got approved by project -in -charge

).The dewatering will include all operations of

all equipments of well - point equipment,

submersible pumps , sump pumps .discharge

pipes etc. labour & supervision , electricity ,

generators ( including stand by generator )

diesel etc .The cost of this operatiion is

supposed to be included in the rates of

various items to be executed below sub - soil

level and nothing extra shall be paid against

this account.


BOQ Civil Works


2.01 Earth work in excavation by mechanical means

(Hydraulic excavator )/ manual means over areas

(exceeding 30cm in depth. 1.5m in width as well

as 10 sqm on plan) including disposal of

excavated earth, in all leads inside the project

side premises as per site plan and lift upto 1.5m,

disposed earth to be levelled and neatly dressed.

All kinds of soil

5660.00 Cum

2.02 Earth work in excavation by mechanical means

(Hydraulic Excavator )/ manual means in

foundation trenches or drains (not exceeding 1.5

m in width or 10 sqm on plan) including dressing

of sides and ramming of bottoms, lift upto 1.5 m,

including getting out the excavated soil in all

leads inside the project site premises as per site

plan and disposed earth to be levelled and neatly

dressed complete as per direction of Engineer-In-

Charge.

All kinds of soil.

600.00 Cum


BOQ Civil Works


2.03 Excavating trenches of required width for pipes,

cables, etc. including excavation for sockets, and

dressing of sides, ramming of bottoms, depth upto

1.5m including getting out the excavated soil, and

then returning the soil as required, in layers not

exceeding 20 cm. in depth including consolidating

Each deposited layer by ramming, watering, etc.

and disposing of surplus excavated soil as

directed, within a lead of 50m.

a) All kind of soil.

i) Pipes, cables etc. exceeding 80mm dia but not

exceeding 300mm dia.1200.00 Metre.

ii) Pipes, cables etc. exceeding 300mm dia but

not exceeding 600mm dia. 500.00 Metre.

2.04 Filling available excavated earth (excluding rock)

in trenches, plinth, sides of foundations etc. in

layers not exceeding 20cm in depth, consolidating

Each deposited layer by ramming and watering,

lead up to 50 m and lift upto 1.5 m.1385.00 Cum

2.05 Extra for every additional lift of 1.5Metre Or part

thereof in :-

a) All kinds of soil

2002.00 Cum.


BOQ Civil Works


2.06 Supplying and filling in plinth with Jamuna sand

under floors including, watering, ramming

consolidating and dressing complete. 363.00 Cum.

2.07 Open timbering over areas including

strutting,shoring etc. complete for all depths. (

Measurements to be taken of the face area

timbered)

250.00 Sqm

2.08 Extra for excavating trenches for pipes, cables

etc in all kinds of soils for depth exceeding 1.5 m

but not exceeding 3 m.

a) Pipes, cables etc, exceeding 80 mm dia. but not

exceeding 300 mm dia.500.00 Cum.

b) Pipes, cables etc, exceeding 300 mm dia. but not

exceeding 600 mm dia.200.00 Cum.


COST SH II


BOQ Civil Works


3.00 SUB-HEAD: III : CONCRETE WORK:-

Cinder filling

3.01 Providing and laying in position Cinder filling in

sunken portion of toilet,Kitchen etc. , for all floors

level as direced by Engineer in charge. 550 Cum

3.02 Providing and laying in position cement concrete

mechanically compacted of specified grade

excluding the cost of centering and shuttering - All

type of work.

a) 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) 4952 Cum.

b) 1:3:6 ( 1 cement: 3 coarse sand : 6 Graded

stone aggregate 40mm nominal size )250 Cum

c) 1:4:8 ( 1 cement: 4 coarse sand : 8 Graded

stone aggregate 40mm nominal size ) 5713 Cum


COST SH III


BOQ Civil Works


4.00 SUB-HEAD:IV: R.C.C WORK:-

DESIGN MIX CONCRETE:-

4.01 Providing and laying in position machine batched,

machine mixed and machine vibrated design mix

cement concrete of specified grade for reinforced

cement concrete work including pumping of

concrete to site of laying but excluding the cost of

centring, shuttering, finishing and reinforcement.

including Admixtures in recommended proportions

as per IS 9103 to accelerate, retard setting of

concrete, improve workability without impairing

strength and durability as per direction of

Engineer-in-charge. M-25 grade reinforced

cement concrete by using 410kg. of cement per

cum of concrete.

All work upto floor V level.

850 Cum.

4.02 Centring and shuttering including strutting,

propping etc. and removal of form for:-

a) Foundations, footings, bases of columns, etc.

for mass concrete. 109 sqm

b) Walls (any thickness) including attached

pilasters, butteresses, plinth and string courses

etc.575 sqm


BOQ Civil Works


c) Suspended floors, roofs, landings, balconies

and access platform. 880 sqm

d) Shelves (Cast in situ)

100 sqm

e) Lintels, beams, plinth beams, girders,

bressumers and cantilevers. 425 sqm

f) Columns, Pillar, Piers, Abutments, Posts and

Struts. 50 sqm

g) Stairs, (excluding landings) except spiral-

staircases.100 sqm

h) Small lintels not exceeding 1.5m clear span,

moulding as in cornices, window sills, string

courses, bands, copings, bed plates, anchor

blocks and the like.

75 sqm

i) Weather shade, Chajjas, corbels etc., including

edges.20 sqm

j) Edges of slabs and breaks in floors and walls

Above 20 cm wide

250 sqm


BOQ Civil Works


k) Extra for shuttering in circular work ( 20% of

respective centring and shuttering items ).176 Sqm

4.03 Reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position

and binding all complete.

a) Thermo-mechanically treated bars.( Grade Fe

500 )85000 Kg.

4.04 Providing ,hoisting and fixing up to floor five level

precast reinforced cement concrete in small lintels

not exceeding 1.5m clear span up to floor five

level including the cost of required centring and

shuttring and finishing smooth with 6mm thick

cement plaster 1:3 ( 1 cement: 3 fine sand ) on

exposed surfaces but excluding the cost of

reinforcement with 1:2:4 ( 1 cement:2 coarse sand

:4 graded stone aggregate 20mm nominal size )

25 Cum

4.05 Providing and fixing sheet covering over

expansion joints with stainless steel screws as

per design to match the colour/shade of wall

treatment

a) Aluminum fluted strips 3.15 mm thick 200 wide

150 Metre


BOQ Civil Works


4.06 Providing and fixing Armour Board (SIL –FIL) of

Dawn colour between expansion joints, thickness

built up using 10mm specifically extruded high

performance sheet minimum density 30 kg per

cum and compression strength 0.21 Kg./Sqm

when tested as per ASTM D-3575 including using

double sided adhesive SIL tape (manufactured by

Supreme Industries Ltd. or equivalent) of 25x25x2

mm at four places per Sqm to the casted surface

to form the expansion joint Armour Board (SIL –

FIL) will become one side of the shuttering while

the expansion joint is being created, including

cost and conveyance of all materials, labour

charges, sundries etc. complete as per drawings

and as directed by Engineer-in-Charge.

a) 50mm thick

150 sqm

4.07 Providing and fixing in position Floor Expansion

Joint covers (Model no. APX-200 series as

manufactured by SAINFIELD/VEXCOLT, U.K. ,

C/S GROUP, USA or equivalent) for internal

horizontal joints in the floor slab including cost

and conveyance of all materials, labour

charges,Neoprence Elastomeric Seal, sundries etc.

complete as per drawings and as directed by

Engineer-in-Charge.

a) Width of joint- 50mm

250 Metre


BOQ Civil Works


4.08 Providing and fixing in position Wall Expansion

Joint covers (Model no. CTR-200 series as


C/S GROUP, USA or equivalent) for internal

vertical joints in the wall columns including cost

and conveyance of all materials, labour charges,

Neoprene Elastomeric Seal sundries etc.

complete as per drawings and as directed by the

Engineer-in-Charge.


300 Metre

4.09 Providing and fixing in position Wall Expansion

Joint with (Model no. CTR-200 series as


C/S GROUP, USA or equivalent) for external

vertical joints in the wall /columns including cost

and conveyance of all materials, labour charges,

sundries etc. complete as per drawings and

specifications and as directed by the Engineer-in-

Charge.


300 Metre


BOQ Civil Works


4.10 Providing and filling expansion joints with

approved polysulphide sealing compound

(confirming to grade BS:5212, Part-I 1990)

including painting the sides of slab upto a depth

of 20mm with approved appropriate primer to

receive the specified sealing compound, providing

and applying masking tape on top edges of joint

to prevent accidental spillage of sealant on top

surface and to give a neat finish to the sealant

has been applied and tooled, all complete as per

specification and direction of Engineer-in-Charge.

250 Metre


COST SH- IV

5.00 SUB-HEAD : V : BRICK WORK :-

5.01 Brick work with F.P.S. bricks of class designation

75 in foundation and plinth in:

a) Cement mortar 1:6 (1 cement : 6 coarse sand)

100 Cum.

5.02 Providing and laying brick work of class

designation 75 in super-structure in cement

mortar 1:6 (1 cement : 6 coarse sand ) including

racking out joints, cleaning and soaking the bricks

at least for 24 hours before use and necessary

scaffolding, curing at least for 7 days etc.

complete for all heights.

350.00 Cum.


BOQ Civil Works


NOTE:- Nothing extra will payable for

rectangular, square, curved or champherred brick

work.

5.03 Brick work with modular fly ash lime bricks (FALG

Bricks) conforming to IS:12894-2002, class

designation 100 average compressive strength in

super structure above plinth level upto floor V

level in :Cement mortar 1:4 (1 cement :4 Coarse sand)

600.00 Cum.

5.04 Extra for mechanised Modular fly ash lime brick

confirming to IS:12894-1990 of class designation

100 in super structure above floor five level for

Each four floor or part there of .

100.00 Cum.

NOTE:- Nothing extra will payable for rectangular,

square, curved or champherred brick work.

5.05 Providing and constructing half brick masonry wall

with bricks of class designation 75 in cement

mortar 1:4 (1 cement : 4coarse sand) including

laying of 2 Nos. 6 mm dia bars in full length at

every 4th course embedded in cement mortar at

all floors and height including racking out the

joints, cleaning and soaking the bricks at least for

24 hours before use and necessary scaffolding,

curing at least for 7 days etc. complete for all

heights.

350.00 sqm

5.06 Random rubble masonry with hard stone in

foundation and plinth including levelling up with

cement concrete 1:6:12 ( 1 cement: 6 coarse

sand : 12 graded stone aggregate 20mm nominal

size ) at plinth level with:


BOQ Civil Works


a) Cement mortar 1:6 ( 1 cement: 6 coarse sand )

55.00 Cum

5.07 Extra for Random rubble masonry with hard stone

in superstructure above plinth level and upto

floor five level,including levelling up with cement

concrete 1:6:12 ( 1 cement: 6 coarse sand : 12

graded stone aggregate 20mm nominal size ) at

window sills,ceiling level and the like.

80.00 Cum


COST SH- V


BOQ Civil Works


6.00 SUB-HEAD: VI: MARBLE WORK:-

6.01 Providing and fixing 18mm thick gang saw cut

mirror polished (premoulded and prepolished)

machine cut for kitchen platforms, vanity counters

,window sills , facias and similar locations of

required size of approved shade, colour and

texture laid over 20mm thick base cement mortar

1:4 (1 cement : 4 coarse sand) with joints treated

with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing

moulding and polishing to edge to give high gloss

finish etc. complete at all levels.

a) Granite of approved colour and shade

Area of slab over 0.50 sqm200.00 sqm

6.02 Extra for providing edge moulding to 18mm thick

marble stone of approved shade for counters,

Vanities etc. including machine polishing to edge

to give high gloss finish etc. complete as per

design approved by Engineer-in-Charge.

a) Granite Work.500.00 Metre


BOQ Civil Works


6.03 Providing and laying 18 mm thick mirror finished

superior granite stone flooring, machine cut in

required size, approved shade, colour and texture

laid over 20 mm (average) thick base of cement

mortar 1:4 (1 cement : 4 coarse sand) with white

cement slurry 6.4 kg/ sqm mixed with matching

pigment, including rubbing and curing etc.

complete at all levels. (Sample of granite stone

shall be got approved by Engineer-in-Charge).

a) Imperial Granite

16850.00 sqm

b) Siera Granite

2900.00 sqm

6.04 Providing and fixing mirror finish 18 mm thick

superior granite stone in risers of steps, skirting ,

dados, claddings,jamb, sill etc machine cut in

required size, approved shade, colour and texture

laid on 12 mm (average) thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand), with

white cement slurry 6.4 kg/ sqm mixed with

matching pigment, epoxy touch ups rubbing and

curing including stainless steel cramps, pin,

dashfastner (HILTI MAKE) etc. complete at all

levels. (Sample of granite stone shall be got

approved by Engineer-in-Charge).


BOQ Civil Works


a) Imperial Granite

1150.00 sqm

b) Siera Granite

150.00 sqm

6.05 Extra for providing opening of required size &

shape for wash basins / kitchen sink in kitchen

platform, vanity counters and similar location in

marble / stone work including necessary holes for

pillar taps etc. including rubbing and polishing of

cut edges etc. complete.

200 Each

6.06 Providing and applying silicone base water

replleent Repellin WR coating with spray @ 0.4

litre per sqm on the back side and edges of

marble stone/Tile before fixing the stone as per

manufacture specifications and direction of

Engineer in charge.

19750.00 sqm

6.07 Extra for Sand blasting finished in place of

polished granite stone as per approval Engineer

in charge.1000.00 sqm


COST SH- VI


BOQ Civil Works


7.00 SUB-HEAD: VII: WOOD WORK:-

7.01 Providing and fixing partition upto ceiling

height consisting of G.I. frame and required

board including providing and fixing of frame

work made of special section power pressed/

roll form G.I. sheet with zinc coating of

grade 175 in consisting of floor and ceiling

channel 50mm wide having equal flanges of

32mm and 0.5mm thick fixed to the floor

and ceiling at the spacing of 610mm centre to

centre with dash fastener of 12.5mm dia meter

40mm length and the studs 48mm wide having

one flange of 34mm and other flange 36mm and

0.50mm thick fixed vertically within flanges of

floor and ceiling channel and placed at a

spacing of 610mm centre to centre by 6mm

dia bolts and nuts at both ends of partition

fixed flush to wall with rawl plugs at spacing

of 450mm centre to centre and fixing of

boards to either side of frame work by

20mm long drive wall screws on studs, floor

and ceiling channels at the spacing of

300mm

centre to centre, including jointing and finishing

to a flush finish with recommended jointing

compound, jointing tape, joint finisher and

two coats of primer suitable for board as per

manufacture's specification and as per Engineer in

charge all complete.

75mm overall thickness partition with 12.5mm

thick double skin plain Gypsum board conforming

to IS: 2095: part I

150.00 sqm


BOQ Civil Works


7.02 Laminates Partition.

Providing and fixing 75mm thick laminates

partition with 50mm thick glass wool of 32kg/cum

denisty as per detailed Drg enclosed consisting of

1.5mm thick Laminate with groove of approved

colour/ make of F.R Grade II pasted with the

adhesive over the 12mm thick fire retardant Ply

(both side) fixed to the M.S Framing ( M.S frame

paid sepreatly) with PU Paint, necessary screws

and fixtures at all height in true line and level, as

shown in the drawing including opening for light

fittings, grills, cutouts, doors, Advt. etc all

complete as reaured as per the direction of the

Engineer-in -Charge.

250 sqm

7.03 Providing and fixing ISI marked flush door

shutters conforming to IS: 2202 (Part I) non-

decorative type, core of block board construction

with frame of 1st class hard wood and well

matched commercial 3 ply veneering with vertical

grains or cross bands and face veneers on both

faces of shutters :

a) 35 mm thick including ISI marked Stainless

Steel butt hinges with necessary screws. 750.00 sqm


BOQ Civil Works


7.04 Providing & Fixing decorative high pressure

laminated sheet of plain / wood grain in gloss /

matt / suede finish with high density protective

surface layer and reverse side of adhesive

bonding quality conforming to IS : 2046 Type S

including cost of adhesive of approved quality.

a) 1.5mm thick.1500.00 sqm

7.05 Extra for cutting rebate in flush door shutters

(Total area of the shutter to be measured).Only

double leaf shutter.

150.00 sqm

7.06 Extra for providing lipping with 2nd class teak

wood battens 25 mm minimum depth on all edges

of shutters (over all area of door shutter to be

measured) Over item no.7.03

2500.00 sqm

7.07 Providing and fixing aluminum sliding door bolts

ISI marked anodised/powder coating ( anodic

coating not less than grade AC 10 as per IS:1868

) transparent or dyed to required colour or shade

with nuts and screws etc. complete.

a) 300 x 16mm.24.00 Each.


BOQ Civil Works


7.08 Providing and fixing aluminium tower bolts ISI

marked anodised/Powder coating (anodic coating

not less than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or shade

with necessary screws etc. complete :

a) 250 x 10mm.24.00 Each

b) 150 x 10mm.

24.00 Each

7.09 Providing and fixing stainless steel tower bolts of

ARKAY make or approved equivalent with

necessary screws etc complete.

a) 250 x12 mm

In stainless steel finish190.00 Each

b) 150x12 mm

190.00 Each

In stainless steel finish

7.10 Supply of SS 304 Grade Carl F Dline DPL 19L

make or approved equivalent Lever Handle Pair

with Entrance Motice lockcase and both side key

cylinder with all necessaray accesories.

a) In stainless steel finish

190.00 Each


BOQ Civil Works


7.11 Supply of SS 304 Grade Carl F Dline DPL 19L

make or approved equivalent Lever Handle Pair

with one side key cylinder one side thumbturn

and Dead Lock with all necessary accesories

a) In stainless steel finish224.00 Each

7.12 Providing and fixing Stainless Steel floor door

stoppers (Twin) of ARKAY make or approved

equivalent with necessary ss screws etc.

complete.a) In stainless steel finish

48.00 Each

7.13 Providing and fixing IS : 3564 marked Zinc Alloy

metal Aluminium die cast body tubular universal

hydraulic door closer,TS1000(Geze) / Dorma

make or equivalent with necessary accessories

and screw etc. complete.

190.00 Each.

7.14 Providing and fixing in position single / double,

leaf fire check doors and chowkhat frames at all

levels of approved make, design, finish, tested

and certified at CBRI, Roorkee etc. complete in all

respect as per specifications and direction of

Engineer-In-Charge and consisting of :-


BOQ Civil Works


a) 48mm thick M.S fire rated door of 120 minutes

fire rating confirming to BS:476 part 22 and

IS:3614 Part II fabricated with 2 nos. 1.2mm thick

galvanised sheet with infill of fire rated

properitory insulation filler both faces of sheet

with lock seam joints at stile edges and internal

reinforcement at top, bottom and stile edges for

fire rating. The door frames are manufactured

from 1.6mm thick galvanised steel sheet pressed

form to double rebate profile of size 154mm x

77mm ( nominal ). The door frames and door

shutters are primed with etch primer and finished

with PU/Powder coated . The shutter would be

mounted with SS Ball Bearing Hinges of size

100mm x 75mm x 3.0mm of Becker Fire Solutions

( 4Nos per leaf ),appropriate openings for view

panel glass, if required. Prototype Test certificate

for a test carried out earlier at CBRI Roorkee for

fire rating of doors, shall be attached along with

manufacturers test certificate. Provisions for fixing

all fixtures shall be built in on the doors prior to

the supply.

b) 6mm thick nominal pilkington pyroshield /

Central Fire Rated Clear Wired Glass of 120

minutes rating one on each leaf of size 200 x

300mm.

c) Stainless steel ball bearing hinges of size

100mm x 75mm x 3mm of BECKER Fire Solution,

4 Nos. on each leaf with screws etc.220.00 sqm


BOQ Civil Works


Note:- Surface area of shutter including door

frame in elevation (one side Only) shall be

measured for payment..


COST SH- VII

8.00 SUB-HEAD: VIII :STEEL WORK:-

8.01 Supplying, Providing, Fabricating, Assembling and

Erecting at site Tubular Structure consisting of

MS Pipe and metal casing confirming to IS

1161/4923 Grade 310 in the profile shaped as per

the design anddrawing with special plate

connectors, pinion joints using SAW / MMAW /

MIG welding process including transportation,

cutting, threading, machining, leads and lifts upto

all heights, tools & plants and necessary

scaffolding, etc. required for all operations

involved with plate connectors, pinion joints, etc

etc. Rate to include one coat epoxy primer and

two or more coat of polyurethene paint to give

smooth and even surface as per direction of

Engineer in charge.

202125.00 kg.

8.02 Steel work welded in built up sections/ framed

work including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer using structural steel etc. as required.

a) In stringers, treads, landings etc. of stair cases

includings use of cehquered plate wherever

required , all complete.

4000.00 kg.

b) In gratings, frames, guard bar, ladders,

railings, brackets, gates, Inserts plates & similar

works.8000.00 kg.


BOQ Civil Works


8.03 Providing and fixing 1mm thick M.S Sheet door

with Frame of 40x40x6mm angle iron and 3mm

M.S Gusset plates at the junctions and corners ,all

necessary fittings complete,including applying a

priming coat of approved steel primer

a) Using M./S angle 40x40x6 mm for diagonal

Braces 100.00 sqm

8.04 Providing and applying fire retarded paint water

based Intumescent Coating applied to the

relevant thickness depending on the load bearing

structure steel hollow sections and to be

protected to achieve the required Fire Resistance

level of 60 minutes. The complete system should

be tested in accordance with AS 1530: Part 4 or

BS 476: Part 21. Independently tested by NAMAS

and NATA approved laboratories and approvals

issued to BS476 Parts 20/ 21: 1987 and AS1530

Pt4 by WFRC and BRANZ or equivalent to ensure

that the product performs to the required

standard complete and as per direction of the

Engineer – in – charge.

( Items includes cost of materials , labour, tools,

ladders , scaffolding and fixtures all machineries

and all taxes i:e sales tax , excise duty , custom

duty etc complete ) . The above work is to be

carried out by a Specialized Agency giving a

warrantee of at least 10 years with top coat

against any manufacturing defect and approved

of the Engineer – in – charge

2300 sqm


BOQ Civil Works


8.05 Supplying and fixing rolling shutters of approved

make, made of required size M.S. laths

interlocked together through their entire length

and jointed together at the end by end locks

mounted on specially designed pipe shaft with

brackets, side guides and arrangements for inside

and outside locking with push and pull operation

complete including the cost of providing and fixing

necessary 27.5 cm. long wire springs grade No.2

and M.S. top cover of required thickness for

rolling shutters.

a) 80 x 1.25 mm M.S. laths with 1.25mm thick top

cover. 550 sqm

8.06 Providing and fixing ball bearing for rolling

shutters. 48 each

8.07 Extra for providing mechanical device chain and

crank operation for operating rolling shutters.

a) Exceeding 10.00 sqm. And upto 16.80 sqm. In the

area. 150 sqm

8.08 Extra for providing grilled rolling shutters

manufactured out of 8mm dia M.S.bar instead of

laths as per design approved by Engineer-in

charge.(area of grilled to be measured)

250 sqm


COST SH- VIII


BOQ Civil Works


9.00 SUB-HEAD: IXI: FLOORING:-

9.01 52mm thick cement concrete flooring with

hardner topping under layer 40mm thick cement

concrete1:2:4 ( 1 cement:2 coarse sand :4

graded stone aggregate 20mm nominal size ) and

top layer 12 mm thick cement hardner consisting

of mix 1:2 ( 1 cement hardner mix : 2 graded

stone aggregate 6mm nominal size ) by volume

hardening compound is mixed @ 2 litre per 50 Kg

of cement or as per manufacturers

specifications.This includes cost of cement

slurry,But excluding the cost of nosing of steps

etc complete.

100.00 sqm

9.02 Cement concrete flooring 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate) finished

with a floating coat of neat cement including

cement slurry, but excluding the cost of nosing of

steps etc. complete.

a) 40mm thick with 20mm nominal size stone

aggregate 200.00 sqm

9.03 Cement plaster skirting (upto 30 cm height) with

cement mortar 1:3 (1 cement : 3 coarse sand)

finished with a floating coat of neat cement.

a) 18mm thick. 250.00 sqm


BOQ Civil Works


9.04 Kota stone slab flooring in approved pattern as

shown in the architectural drawing over 20 mm

(average) thick base laid over and jointed with

grey cement slurry mixed with pigment to match

the shade of the slab including rubbing and mirror

polishing complete with base of cement mortar 1

: 4 (1 cement : 4 coarse sand) :

a) 25mm thick.

800.00 sqm

9.05 Kota stone slabs 25 mm thick in risers of steps,

skirting, dado and pillars laid on 12 mm (average)

thick cement mortar 1:3 (1 cement 3 coarse

sand) and jointed with grey cement slurry mixed

with pigment to match the shade of the slabs,

including rubbing and mirror polishing complete.

a) Kota stone - 25mm thick

125.00 sqm

9.06 Providing and fixing Ist quality ceramic glazed

wall tiles in approved pattern as shown in the

architectural drawing conforming to IS : 15622

(thickness to be specified by the manufacturer )

of approved make in all colours, shades except

burgundy, bottle green, black of any size as

approved by Engineer-in-Charge in skirting, risers

of steps and dados over 12 mm thick bed of

cement Mortar 1:3 (1 cement : 3 coarse sand)

and jointing with grey cement slurry @ 3.3kg per

sqm including pointing in white cement mixed

with pigment of matching shade complete.

1000.00 sqm


BOQ Civil Works


9.07 Providing and laying in floors mirror finish

Homogeneous vitrified tiles Marbitto/Orient or

equivalent make without warpage, size of tile

600mmx600mm x9.6mm thick of required colour

as approved and laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) over

cement slurry @ 3.3 kg/ sqm including making

and grouting 3mm thick joints with solid epoxy

grout of PIDILITE, LATICRETE, SIKA or equivalent

of desired shade etc.complete and as per pattern

specified in approved drawings and specifications

a) Vitrified tiles 60 x 60 cm10000.00 sqm

b) Vitrified tiles 100 x 100 cm1700.00 sqm


BOQ Civil Works


9.08 Providing and laying in skirting ,risers of steps

and dado mirror finish homogeneous vitrified tiles

Marbitto/Orient or equivalent make without

warpage,size of tile 600 x 600x9.6mm thick of

required colour as approved and laid on 12mm

thick cement mortar1:3 ( 1 cement: 3 coarse sand

) and jointed with grey cement slurry @ 3.3

kg/sqm including making and grouting 3mm thick

joints by PIDILITE/LATICRETE,/SIKA Or

equivalent of desired shade etc. complete and as

per pattern specified in approved drawings and

specifications. ( sample of vitrified tile shall be got

approved before execution of work by the

Engineer-in-charge.)

a) Vitrified tiles 60 x 60 cm

6550.00 sqm

9.09 Providing and laying in floors Anti skid finish

Homogeneous vitrified tiles(600x600)mm

Marbitto/Kajaria or equivalent make without

warpage, size of tile 600mmx600mm x 9.6mm

thick of required colour as approved and laid on

20 mm thick cement mortar 1:4 (1 cement: 4

coarse sand) over cement slurry @ 3.3 kg/ sqm

including making and grouting 3mm thick joints

with solid epoxy grout of PIDILITE, LATICRETE,

SIKA or equivalent of desired shade etc.complete

and as per pattern specified in approved drawings

and specifications .

400.00 sqm

9.10 Hacking of existing floor manualy with chiesel and

hammer to achieve adequete grip with mortor for

re-flooring as directed by Engineer in charge.16000.00 sqm


COST SH- IX


BOQ Civil Works


10.00 SUB-HEAD: X : FINISHING:-

10.01 12mm cement plaster of mix :-

a) 1:6 ( 1 cement : 6 coarse sand)2000.00 sqm

10.02 15mm cement plaster on the rough side of single

or half brick wall of mix

a) 1:6 (1 cement : 6 coarse sand)1000.00 sqm

10.03 12 mm cement plaster 1:3 (1 cement : 3 coarse

sand) finished with a floating coat of neat cement. 300.00 sqm

10.04 6mm cement plaster of mix :-

a) 1:3 (1 cement : 3 fine sand)2000 sqm

10.05 White washing with lime to give an even shade:-

a) Old Work (three or more coats)5000 sqm

10.06 Distempering with Oil bound washable distemper

of approved brand and manufacture to give an

even shade. a) old work ( two or more coats ) over and

including priming coat with cement primer

including removing of old paint.

13600.00 sqm

10.07 Finishing walls with water proofing cement paint

of required shade :a) Old work (Two or more coats applied @ 3.84

kg. / 10 sqm)including removing of old paint 4000.00 sqm


BOQ Civil Works


10.08 Painting with synthetic enamel paint of approved

brand and manufacture to give an even shade :

a) Two or more coats on Old work including

removing of old paint 3000.00 sqm

10.09 Providing and finishing 24 gauge 19 mm size

galvanised chicken wire mesh of approved make

and design at junctions of RCC and brick work

and other locations including necessary clips and

"U" nails rawl plugs,screws etc. complete for all

height as per specifications & direction of the

Engineer-In-Charge

150 sqm

10.10 Finishing walls with texture exterior paint of

required shade

Old work(Two or more coats applied @3.28

ltr/10sqm.) over and including base coat of water

proofing cement paint "Snowcemplus" or

equivalent applied @2.2kg/10sqm including

removing of old paint.

250.00 sqm

10.11 Distempring with 1st quality acrylic washable

distemper (ready mixed) of approved

manufacturer and of required shade and colour ,

cost of all materials, labour charges, scaffolding,

sundries etc including removing of old paint

complete as requred and as per direction of

Engineer in charge..(Two or more coats )

41100.00 sqm


BOQ Civil Works


10.12 Providing and applying two coats white cement

based putty including removing of old paint (

Birla White/JK wall care putty or approved

equivalent ) over plastered/ RCC surface and

grinding the surface smooth with sand paper to

get an even and smooth finish including cost and

cartage of all materials, labour charges,

scaffolding, sundries etc. complete as required

and as per direction of Engineer in charge.

15000.00 sqm

10.13 Wall painting with Dulux Weathershield Max

Acrlic Emulsion paint with base primer of

approved make 2 or more coats on old work

including removing of old paint to give an even

shade as per manufacturer specifications &

including cost of all materials, labour charges,

scaffolding, sundries etc. complete as required

and as per direction of Engineer in charge.

8100.00 sqm


COST SH - X

11.00 SUB-HEAD: XI: ALUMINIUM WORK:-

11.01 Providing and fixing ALUMINIUM STICK

CURTAIN GLAZING on to the prefixed

structural M.S. framework (M.S frame to be paid

seprately) 6 mm thick clear toughned glass with

aluminium sections fabricated out of heavy duty

aluminium extruded profile of approved make as

detailed under.(i) Specially designed aluminium mullions and

transoms of extruded aluminium sections shall be

of 6063 T6 alloy with chemical composition and

mechanical properties as per IS: 733:1983 and

I.S. 1285:2002.


BOQ Civil Works


(ii) All the aluminium sections will be pure polyester

powder coated to 60 microns as per IS: 1868 of

required colour as per direction of the Engineer –

in – charge. All profiles shall be provided with

Masking Tapes to provide safety against external

scratches at site. (Masking Tapes to be removed

only at the time of handing over as per the

instructions of Engineer in charge.

(iii) Vertical mullions (M – 150mm x 56mm with

minimum 2.5mm thickness as per drawing

enclosed) to be fixed to RCC / STEEL beams /

columns with designed Aluminium / Galvanized

M.S. brackets and stainless steel anchor fasteners

PVC / Teflon separator membranes between

metal to metal joints.(iv) Horizontal transoms (T – 150mm x 50mm with

minimum 2.5mm thickness as per drawing

enclosed) to be fixed to vertical mullions with

stainless steel screws such that they are not seen

in vision panels, forming grid systems of required

size as per elevation drawings for vision and

spandrel glazed panels.

(v) Heavy duty, best quality EPDM gaskets at joints

and connections between aluminium members

(EPDM should have its property at-least for

minimum 10 years, should not become brittle).

(vi) Glazed curtain wall infill panels including approved

fire stop cum smoke seal wherever applicable.

(vii) All components should be sealed for water

proofing with silicon of (Wacker Sika-305 or DOW

corning DC-991 make or equivalent) joint

movement minimum + 50% according to ASTMC -920.


BOQ Civil Works


(viii) The glazing frame shall be aligned for the entire

height and for the entire width by laser beam

equipment to ensure 100 percent 'X' axis and 'Y'

axis alignment. The glazing frame work shall be

provided with approved in-built ventilation and

drainage system and the entire joint must be

properly sealed with weather silicon (Grade-995)

of approved make to make the joint air tight and

water tight. The glazing unit shall be fixed in

aluminium framework with a E.P.D.M. gaskets of

approved make and aluminium pressure plate as

per drawings enclosed. E.P.D.M. gaskets of

suitable profiles to accommodate glasses in all the

vision areas shall be provided and at all glazing

area to make water/ air tight to the satisfaction of

Engineer in charge.

Gaps up to 10 mm between the peripheral

aluminum member and masonry / R.C.C. / Stone

shall be sealed by inserting Backer Rod and

weather silicon. Wherever the gaps are expected

to be more than 10 mm, shall be sealed by

providing and fixing of 2mm thick aluminium

sheet flashings bent to required profile as per

approved design duly Pure Polyester powder

coated to 60 Micron thickness in approved colour

/ natural anodised to 20 - 25 microns.

A Vision panel with glazed units of size as per

design/drawing


BOQ Civil Works


Items includes Supplying, Installation and Fixing

of Aluminium Frame with Structural members,

mullions, Transoms, sub frame, cover plate,

fixtures, scaffolding, Labours, tools etc. including

supply installation of 6mm thick toughened clear

glass as approved including cost of sealants,

brackets, fasteners, screws, sleeves, spacer tap

backer rods, bolts, gasket, fixtures, double stage

scaffolding, sales tax/VAT, excise duty etc.

complete in all respect. However the cost of M.S.

structural steel shall be measured and paid

separately.

1675.00 sqm

11.02 Glazing Curtain Wall System – Providing and

fixing aluminium curtain wall system, the glass to

be fixed at the outer side of the Aluminium frame

with two sides structural silicon sealant

(SG18/DC995) and two side mechanical support

with pressure plate and cap. The system should

be without direct touch between in and out

profiles to avoid acoustic transfer, the system to

have a thermal analyst to ensure max. U-value of

2.7 w/sqm, every glass panel to be drained

separately to avoid water chambers in the system

and to assure easy detection of water problems

and repair if required.

(i) Specially designed mullions and transoms of

extruded aluminum sections shall be of 6063

alloy. Specially designed mullions and transoms of

extruded aluminum sections shall be of 6063

alloy.(ii) Coating of Aluminum section will be done

with 20 micron anodized or 50-60 micron pure

polyster powder coating of required colour as per

direction of Engineer-in-Charge.


BOQ Civil Works


(iii) Vertical mullions (150 x 56 mm with

minimum 2.5 mm thickness at the back side) to

be fixed to RCC beams / columns with designed

Aluminum brackets and Stainless steel Anchor

fasteners PVC ply / Teflon separator membranes

between metal to metal joints.

(iv) Horizontal transoms (150 x 56 mm with

minimum 2.5 mm thickness at back) to be fixed

to vertical mullions with SS screws such that they

are not seen in vision panels, forming grid

systems of required size as per elevation drawings

for vision and spandrel glazed panels.

(v) Heavy duty, best quality EPDM gaskets at

joints and connection between Aluminum

members.

(vi) Glazed curtain wall infill panels including

approved fire-stop-cum smoke seal wherever

applicable.


proofing with silicon of Wacker, DOW corning

make or equivalent.a) Vision panel with glazed units of size as per

design / drawing and consisting of 6 mm thick

clear float toughened glass of approved shade

with characteristics as per specification fixed in

precise size on the outer face of the infill panel of

approved make and glazed in fill panel to be

formed by approved means of special structural

quality silicone adhesive sealant layer

manufactured by Wacker, Dow coning or

equivalent as per direction of Engineer-in-Charge


BOQ Civil Works


(Item includes Supplying, Installation and Fixing

of Aluminimum Frame with structural members,

mullions, Transom, subframe, cover plate, fixtures

etc. including supply installation of 6 mm thick

toughened Glass including cost of sealants,

brackets, fastners, screws, sleeve, spacer tap,

backer rod, bolts, gasket, fixtures, double stage

scaffolding, sales tax, excise duty, custom duty

etc. etc. complete in all respect). The work is to

be carried out by a Specalised Agency approved

by the Engineer-in-Charge.

615.00 sqm

The above work is to be carried out by a specialized Agency

approved by the Engineer-in Charge.

11.03 Providing and fixing FRAMELESS GLASS

CLADDING around GLASS LIFTS with vertical

17.52mm thk laminated glass having outer 8 mm

thick laminated clear glass + 1.52mm P.V.B.

lamination + inner 8mm thk tempered clear glass

of approved make with stainless steel spider

fittings(DORMA / DLine), top and bottom stainless

steel brackets (spider fittings fixed to pre installed

structural M.S framework (M.S frame to be paid

seprately ), including making suitable holes in the

laminated glass befor installation complete as per

design drawings. The periphery shall be sealed

with silicon weather sealant to make the cladding

water/ airtight. The cladding of 1.6mm thk s.s.

Sheet cladding in the jambs and soffits of lift’s

door opening. The rates shall include sealing of

glass to connector pipes with stainless steel

fixtures as detailed in drawings. Silicon sealant

grade shall be "Dow corning - USA" or "GE Silicon

- USA" or "WACKER - Germany" as per the design

requirement.


BOQ Civil Works


The cladding frame shall be aligned for the entire



axis alignment. The cladding joints must be

properly sealed with weather silicon to make the

joint water tight / air tight.

375.00 sqm

11.04 Providing, supplying and fixing glazing /

partitions upto ceiling hight using 12mm clear

toughened glass of saint gobain or approved

equivalent in partitions with glass fixed to the

floor, ceiling and sides with embedded aluminium

U channel of required size including EPDM pad

and structural / weather glass silicon sealant to

make the glazing air and water tight including

neatly cutting the chase in granite flooring /

cladding and fixing to MS frame work at ceiling

etc. complete in all respects as per the

architectural drawings and directions of Engineer

in charge.

200.00 sqm

11.05 Providing and fixing ALUMINIUM STICK CURTAIN

GLAZING AT ROOF lvl for skylight glazing on to

the prefixed structural M.S. framework (paid

seaprately) using 13.52 mm thick laminated glass

comprising of the two glass panes of approved

make 6 mm thick clear toughned glass on upper

face and 6 mm thick clear toughned glass on

lower face with laminated with 1.52mm thk PVB

layer to form mono glass unit with aluminium

sections fabricated out of heavy duty aluminium

extruded profile of approved make as detailed

under.

(i) Specially designed aluminium mullions and

transoms of extruded aluminium sections shall be

of 6063 T6 alloy with chemical composition and

mechanical properties as per IS: 733:1983 and

I.S. 1285:2002.


BOQ Civil Works


(ii) All the aluminium sections will be pure polyester

powder coated to 60 microns as per IS: 1868 of

required colour as per direction of the Engineer –

in – charge. All profiles shall be provided with

Masking Tapes to provide safety against external

scratches at site. (Masking Tapes to be removed

only at the time of handing over as per the

instructions of Engineer in charge.

(iii) Vertical mullions (M – 150mm x 56mm with

minimum 2.5mm thickness at the back side,

2.5mm thickness in front as per drawing

enclosed) to be fixed to RCC / STEEL beams /

columns with designed Aluminium / Galvanized

M.S. brackets and stainless steel anchor fasteners

PVC / Teflon separator membranes between

metal to metal joints.

(iv) Horizontal transoms (T – 150mm x 56mm with

minimum 2.5mm thickness at the back side,

2.5mm thickness in front as per drawing

enclosed) to be fixed to vertical mullions with

stainless steel screws such that they are not seen

in vision panels, forming grid systems of required

size as per elevation drawings for vision and

spandrel glazed panels.

(v) Heavy duty, best quality EPDM gaskets at joints

and connections between aluminium members

(EPDM should have its property at-least for

minimum 10 years, should not become brittle).

(vi) Glazed curtain wall infill panels including approved

fire stop cum smoke seal wherever applicable.


proofing with silicon of (Wacker Sika-305 or DOW

corning DC-991 make or equivalent) joint

movement minimum + 50% according to ASTMC -920.


BOQ Civil Works


(viii) The glazing frame shall be aligned for the entire



axis alignment. The glazing frame work shall be

provided with approved in-built ventilation and

drainage system and the entire joint must be

properly sealed with weather silicon (Grade-995)

of approved make to make the joint air tight and

water tight. The glazing unit shall be fixed in

aluminium framework with a E.P.D.M. gaskets of

approved make and aluminium pressure plate as

per drawings enclosed. E.P.D.M. gaskets of

suitable profiles to accommodate glasses in all the

vision areas shall be provided and at all glazing

area to make water/ air tight to the satisfaction of

Engineer in charge.

Gaps up to 10 mm between the peripheral

aluminum member and masonry / R.C.C. / Stone

shall be sealed by inserting Backer Rod and

weather silicon. Wherever the gaps are expected

to be more than 10 mm, shall be sealed by

providing and fixing of 2mm thick aluminium

sheet flashings bent to required profile as per

approved design duly Pure Polyester powder

coated to 50 Micron thickness in approved colour

/ natural anodised to 20 - 25 microns.

A Vision panel with glazed units of size as per

design/drawing and consisting of laminted glass

comprising of 6mm thick toughened clear glass at

outer face + 1.52mm thl PVB lamination + 6mm

thick toughenedglass as approved pattren ceramic

fritted glass at inner face with characteristics and

as per specification fixed in precise size on the

outer face of the mullion / transom.


BOQ Civil Works


Items includes Supplying, Installation and Fixing

of Aluminium Frame with Structural members,

mullions, Transoms, sub frame, cover plate,

fixtures, scaffolding, Labours, tools etc. including

supply installation of 13.52 mm thick laminated

clear glass (6mm thick toughened clear glass at

outer face + 1.52mm thk PVB LAMINATION +

6mm thick toughened clear glass as approved

pattren ceramic fritted glass at inner face)

including cost of sealants, brackets, fasteners,

screws, sleeves, spacer tap backer rods, bolts,

gasket, fixtures, double stage scaffolding, sales

tax/VAT, excise duty etc. complete in all respect.

However the cost of M.S. structural steel shall be

measured and paid separately.

225.00 sqm

The above work is to be carried out by a

specialized Agency approved by the Engineer-in

Charge.

11.06 Providing and fixing aluminium works for doors,

windows, ventilators and partitions with extruded

built-up standard tubular sections/appropriate Z

sections and other sections of approved make

conforming to IS:733 and IS:1285, fixed with

rawl plug and screws or with fixing clips, or with

expansion hold fastners including necessary filling

up of gaps at junctions, at top, bottom and sides

with required PVC / Neoprene felt etc. Aluminium

sections shall be smooth, rust free, straight mitred

and jointed mechanically wherever required

including cleat angle, aluminium snap beading for

glazing / panelling, C.P. brass / stainless steel

screws, all complete as per architectural drawings

and the directions of Engineer-in-Charge. (glazing

to be paid for separately as per relvent Item)

a) For Fixed Portion.


BOQ Civil Works


Powder coated aluminum ( minimum thickness of

powder coating 50-60 micron ) 500 kg

b) For shutters of doors, windows & ventilators

including providing and fixing hinges / pivots/

floor spring/ locking arrangement, Sliding and

making provision for fixing of fittings wherever as

required including the cost of PVC / neoprene

gasket required .

Powder coated aluminum ( minimum thickness of

powder coating 50-60 micron )500 kg

11.07 Providing and fixing glazing in aluminium door,

window, ventilator shutters and partitions, etc.

with PVC / neoprene gasket etc. complete as per

the architectural drawings and the directions of

Engineer-In-Charge.

a) With toughned Glass 6mm thickness

100.00 sqm

11.08 Providing and fixing for column,wall,cladding with

4mm thick aluminium composite panel

around the columns/dead walls/ beam / roof

facia/ under side sky light at all heights. The rate

shall include all necessary frame work, tools and

plants, scaffolding, technical personal and as per

technical specifications, complete as per the

direction of the Engineer-in-Charge.

Items includes cost of Aluminium Frame, ACP

Panel, Weather Sealant, Gasket, Foam,

Scaffolding, Fixtures all machineries and all taxes

i.e. sales tax, excise duty, custom duty etc.

complete. The above work is to be carried out by

a Specialized Agency approved by the Engineer-in-

Charge.

8200.00 sqm

Only surface area of aluminium composite panel

alongwith its groove shall be measured for

payment .


BOQ Civil Works


11.09 Fabrication, supply and installation of 1.5 mm

thick Stainless steel sheet in Polish

/brushed finish (Grade SS-304) cladding

around the RCC column in the profile as per

drawings complete with bending to shape as

required, fixing to MS frame with necessarry

anchors, bolts, clips, counter sunk screws,

washers packings, silicon sealant, backer rods,

etc. as required for installation as per the

approved shop drawings and instructions of

engineer in charge. ( M.S framing to be paid

seperately )

Note : All the fabrication work to be done on CNC

laser cutting machine, CNC bending & rolling

macines. SS cladding panels to be supplied in

prefabricated /prerolled condition in modular form

at site to minimize the site installation/welding.

No welding /Fabrication shall be allowed at site.

550.00 sqm

11.10 Providing and fixing 12mm thick LG HIMACS

shade of (Volcanics-Mikeno VE-02)/ Du

point Corian Acrylic Solid Surface for

circular column moulded to shape cladding

as per drawing at all heights/ level. The rate

shall include all necessary G.I frame work at

600c/c, 12mm commercial board, tools and

plants, scaffolding, technical personal and as per

technical specifications, complete , as per the


Items includes cost of G.I Frame, acrylic solid

surface, 19mm commercial board, Weather

Sealant, Gasket, Foam, Scaffolding, Fixtures all

machineries and all taxes i.e. sales tax, excise

duty, custom duty etc. complete job as required.

The above work is to be carried out by a

Specialized Agency approved by the Engineer-in-

Charge.

450.00 sqm


BOQ Civil Works


Only surface area of acrylic solid surface panel


payment .

11.11 Providing, fixing and installing in position railing

system of AISI-304 grade Hair line finish stainless

steel railling comprising of 50.8mm dia 2mm thick

top rail balustrade of 50x6mm thick 900mm c/c

with runner pipes of 20mm dia 1.65mm thick

along with base grouting plate and shoe cover

complete as required as per architeural detail

drawing as per direction of Engineer in charge.

2500.00 kg

11.12 Providing and fixing perforated metal ceiling

system (150 – SAS, UK or equivalent) in grid size

of 600mm x 600mmx0.60mm thick using bevel

edge, Clip-in hinge down providing sliding Zintec

(electro-galvanised steel) panels finished

polyester powder coat with 20% gloss, color and

finish as approved by the Engineer-in-Charge. The

suspended ceiling system shall comprise of ceiling

tiles (SAS Emac System 150 or equivalent)

supported by galvanised suspension system

(Emac Omega or equivalent) with automatic self

levelling double pip feature. Tiles shall be

perforated to pattern 1522 with 10mm plain

borders, complete with factory black acoustic

tissue faced 18mm thick x 80 kg/m3 acoustic pad

with reinforced aluminium foil backing. System

shall be manufactured to meet Class 'O' fire

propagation and Surface spread of flame. The

galvanised Omega bar type 154 is fixed to pre-

engineered Emac channel section or equivalent of

1.2mm thick at 1500 / 2000mm max. centers and

as per manufacturers specifications. (Item and

rate shall include supplying, installation and fixing

of System SAS 150 or equivalent complete

including cost of grid and all accessories such as

perimeter channels, hold down wedges, acoustic

insulation, fasteners, anchorbolts, brackets,

screws, fixtures, all machineries and all taxes, i.e.

1900.00 sqm


BOQ Civil Works


11.13 Providing and fixing Gyptone board suspended

ceiling with 50mm thick glass wool of 32kg/cum

denisty, which includes Gypsteel® perimeter

channels of size 0.55mm thick (having one flange

of 20mm and another flange of 30mm and a web

of 27mm) along with perimeter of ceiling, screw

fixed to brick wall/partition with the help of nylon

sleeves and screws, at 610mm centres. Then

suspending Gypsteel® intermediate channels of

size 45mm (0.9mm thick with two flanges of

15mm each) from the soffit at 1200mm centres

with ceiling angle of width 25mmx10mmx0.55mm

thick fixed to soffit with GI cleat and steel

expansion fasteners(Mfg by saint Gobain India

Gypsum). Then Gypsteel® Ceiling section of

0.55mm thickness having knurled web of 51.5mm

and two flanges of 26mm each with lips of

10.5mm are then fixed to the Gypsteel®

intermediate channel with the help of connecting

clip and in direction perpendicular to the

Gypsteel® intermediate channel at 600mm

centres. Single layer of 12.5mm 4 side tapered

edge Gyptone board is then screw fixed to ceiling

section with 25mm drywall screws at 230mm centres. Screw

fixing is done mechanically either with screw

driver or drilling machine with suitable attachment

all complete as required at all heights as per

direction and instruction of Engineer-in-Charge.

1550.00 sqm

OnlyGyptone board suspended ceiling area will be

measured for the purpose of payment.

The Job to be carried out by reputed company

having sufficient work experience.


BOQ Civil Works


11.14 Providing, making and placing ticket Counter

made up from 19mm thick commercial board of

BWR Grade over the frame work of hard wood of

section 70 x 50mm including the fixing of 12mm

thick acrylic polymer solid surface of white HI-

Macs/ Du point corian or equivalent at the

designated location in the extruded profile of 15

x20mm with rounded edges and 1.25mm thick

stainless steel sheet of grade SS 304 at the

bottom of the counter with necessary fixtures

,fittings etc.complete as shown in the drawing

and as per the direction of the Engineer-In-

Charge.

36 each

11.15 Providing and fixing Back painted 6mm

toughneed glass with 25mm dia SS stud as per

drawing details as directed by Engineer in charge.300 sqm


BOQ Civil Works


11.16 Providing & fixing 3M Fasara - Macrx -Mat Crystal

Decorative / Privacy Glazing Film, with following

features backed 3M MCS warranty of 5 years.The

material should consist of a durable polyester with

a decorative matte surface, manufactured with a

silicone liner to protect clear pressure-sensitive

adhesive. Films contain no metals, but so contain

infrared-absorbing carbon, metal oxide particles,

or both. Film should have nominal thickness of

between 3.0 mils and 3.5 mils (0.003 and 0.0035

inches).The film color should be clear, containing

no metal coatings or dyed polyesters.

1. Ultraviolet Rejected (ASTM E 903): Not less

than 99 percent.

2. Visible Light Transmission (ASTM E 903, ASTM

E308): Not more than 88 percent.

3. Visible Light Rejected (ASTM E 903): Not less

than 7 percent.

4. Solar Heat Reduction: Not less than 6 percent.

5. Shading Coefficient at 90 Degrees (Normal

Incidence) (ASTM E 903): Not less than 0.92.

5years Warranty to be endorsed by 3M India

1250.00 sqm

11.17 ACP FALSE CEILING

Providing and fixing for False ceiling with 4mm

thick aluminium composite panel of at all

heights as per drawing detail . The rate shall

include all necessary Hangers,frame work, tools

and plants, scaffolding, technical personal and as

per technical specifications, complete as per the



BOQ Civil Works


Items includes cost of Aluminium Frame, ACP

Panel, Hangers,Weather Sealant, Gasket, Foam,

Scaffolding, Fixtures all machineries and all taxes

i.e. sales tax, excise duty, custom duty etc.

complete. The above work is to be carried out by

a Specialized Agency approved by the Engineer-in-

Charge.

100.00 sqm

Only surface area of aluminium composite panel


payment .

11.18 UPVC Window glazing

Providing and fixing factory made UPVC

(Kommerling or equivalent) works for for doors,

windows, ventilators and partitions with UPVC

extruded built-up sections/appropriate Z sections

having overall dimension of profile size 48x40mm

( tolerance +1.00mm) fixed with rawl plug and

screws or with fixing clips, or with expansion hold

fastners including necessary filling up of gaps at

junctions, at top, bottom and sides with required

PVC / Neoprene felt etc. UPVC sections shall be

smooth, rust free, straight mitred and jointed

mechanically wherever required including cleat

angle, UPVC snap beading for glazing / panelling,

C.P. brass / stainless steel screws, all complete as

per architectural drawings and the directions of

Engineer-in-Charge. (glazing to be paid for

separately as per relvent Item)

a) For Fixed Portion.

1540.00 sqm

b) For shutters of doors, windows & ventilators

including providing and fixing hinges / pivots/

floor spring/ locking arrangement, Sliding and

making provision for fixing of fittings wherever as

required including the cost of PVC / neoprene

gasket required .

510.00 sqm


BOQ Civil Works


11.19 Providing and fixing glazing in UPVC door,

window, ventilator shutters and partitions, etc.

with PVC / neoprene gasket etc. complete as per

the architectural drawings and the directions of

Engineer-In-Charge.

2050.00 sqm

a) With toughned Glass 6mm thickness


COST SH- XI


BOQ Civil Works


12.00 SUB-HEAD: XII: WATERPROOFING WORK

12.01 Providing and laying water proofing treatment in

sunken portion of WC's ,bathroom etc. by

applying cement slurry mixed with water proofing

cement compound consisting of applying : a) First

layer of slurry of cement@ 0.488 kg/sqm mixed

with water proofing cement compound @ 0.253

kg/sqm This layer will be allowed to aircure for 4

hours.b) Second layer of slurry of cement @

0.242 kg/sqm mixed with water proofing

compound @ 0.126 kg/sqm .This layer will be

allowed to air cure for 4 hours followed with water

curing for 48 hours.The rate includes prepration

of surface,treatment and sealing of all

joints,corners,junctions of pipes and masonry with

polymer mixed slurry.

2500.00 sqm


COST SH XII

13.00 SUB-HEAD: XIII : EXTERNAL DEVELOPMENT:-

13.01 Providing and fixing in floors Vitrified Paving Tiles

in different sizes ( Thickness to be approved by

the Manufacturer ) with water absorption less

Than 0.08% and confirming to IS:15622 of

approved make and pattern in all colour &

shade,laid on 20mm thick cement mortar 1:4 ( 1

cement: 4 coarse sand ) including grouting the

joints with white cement and matching pigment

etc. Complete.

a) 100 x 100 x 10mm

3150.00 Sqm


BOQ Civil Works


13.02 Providing and fixing Quartzite stone in Flooring of

size 100x100mm and 70mm to 80mm thick laid

over 20mm ( avg. ) thick base of cement mortar

1:6 ( 1 cement: 6 coarse sand ) and jointed and

pointing with cement mortar 1:3 ( 1 cement: 3

coarse sand ) etc. complete as per direction of

Engineer-In-Charge.

200.00 Sqm

13.03 Providing and laying C.C pavement/ road of Mix M-

30 with ready mixed concrete from batching

plant. The ready mix concrete shall be laid and

finished with screed board vibrator,Vaccum

dewatering process and finally finished by floating

,brooming with wire brush including steel form

work with surdy M.S. channel section , curing and

providing and filling construction joints and

dummy joints with approved joint filler and primer

including rounding of the edges and filling the

grooves 10x25 mm deep at top for construction

joints and 10mmx50mm deep at top for dummy

joints with joints sealing compound (confirming to

grade B of : 1834) including making necessary

arrangements for expansion joints etc, all

complete as required and as direction of Engineer

in charge.

5585.00 cum

13.04 Providing and laying 60mm thick factory made

cement concrete interlocking paver block of M-

35 Grade made by block making machine with

strong vibratory compaction and of approved size

and design/shape laid in required colour and

pattern over and including 50mm thick compacted

bed of course sand ,filling the joints with coarse

sand etc. all complete as per the direction of the

Engineer-In-Charge.

1600.00 Sqm


BOQ Civil Works



cement concrete paver block of M- 40 Grade of

size 200 x 100 x 60mmm made by block making

machine with strong vibratory compaction and of

approved size and design/shape laid in required

colour and pattern over and including 50mm thick

compacted bed of coarse sand ,filling the joints

with coarse sand etc. all complete as per the

direction of the Engineer-In-Charge.

a) In Grey Colour

450.00 Sqm

b) In Red/Beige Colour

450.00 Sqm


precast grass grid pavers of size 600 x 400 x

70mm thick approved make design and shade

having strength of M-30 over 30mm thick base of

Jamuna sand and filling the joints with dry

jamuna sand including compacting and vibrating

complete as per direction of Engineer-In-Charge.

510.00 Sqm

13.07 Providing and laying at or near ground level

factory made kerb stone of M-25 grade cement

in position to the required line,level and curvature

jointed with cement mortar 1:3 ( 1 cement: 3

coarse sand ) including making joints with or

without grooves ( thickness of joints except at

sharp curve shall not be more than 5mm)

including making drainage opening wherever

required complete etc. as per direction of

Engineer-In-Charge.( Length of finished kerb

edging shall be measured for payment)( Precast

C.C Kerb stone shall be approved by the Engineer-

250.00 Cum


BOQ Civil Works


13.08 Providing and laying and making kerb channel

30cm wide and 50mm thick of cement concrete

1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone

aggregate 20mm nominal size ) over 75mm bed

of dry brick ballast 40 mm nominal size well

rammed and consolidated and grouted with fine

sand including finishing the top smooth etc.

complete and as per direction of the Engineer-In-

charge.

100.00 Sqm

13.09 Providing and laying C.C pavement of Mix M-25

with ready mixed concrete from batching

plant.The ready mixed concrete shall be laid and

finished with screed board vibrator,vaccum

dewatering process and finally finished by floating

,Brooming with wire brush,joint cutting etc.

complete as per specification and direction of

Engineer-In-Charge.( The panel shuttering work

shall be paid for seperately.) 8000.00 Cum

13.10 Providing and mixing fiber 100% virgin

polypropylene fibers as approved @ 900 gms per

cubic meter of cement concrete as per

manufacturers specifications.

5585.00 Cum


BOQ Civil Works


13.11 Supplying and fixing 2 meter high temporary

barricading as per the drawing enclosed which

includes painting and writing , arrangements for

traffic diversion such as traffic signals including

construction at site for day and night , glow lamps

, reflective signs , marking , flags , caution tape

as directed by Engineer – in -charge . The

barricading shall be provided during the execution

of the entire work in completion and shall not be

removed at any stage without approval of the

Engineer – in- charge item to include shifting in

position as per the direction of Engineer – in-

charge and all incidentals, labour material ,

equipments and works required to execute the

job . The barricading shall be the property of the

contractor after completion of work.

250.00 Metre


COST


Abstract Of Cost Electrical Works

In figures In words

I METER BOARDS, SUB DISTRIBUTION BOARDS

AND DISTRIBUTION BOARDS.

II POINT WIRING

III SUB MAIN CABLES

IV SUPPLY & FIXING OF LIGHT FIXTURES & FANS

V CONDUITING FOR TELEPHONE/ SMATV

SYSTEM/ SECURITY SURVEILLANCE SYSTEM/

PUBLIC ADDRESS SYSTEM/ FIRE DETECTION

AND ALARM SYSTEMS

VI INTELLIGENT ADDRESSABLE FDA SYSTEM

VII WIRING FOR TELEPHONE SYSTEM

BILL OF QUANTITIES FOR REDEVELOPMENT OF INTER STATE BUS TERMINAL AT KASHMERE GATE DELHI -110006

SECTION - I (INTERNAL ELECTRICAL WORKS FOR PHASE - I)

SUMMARY SHEET FOR ELECTRICAL WORKS

S.NO. SH. DESCRIPTION Amount in (Rs.)


Abstract Of Cost Electrical Works

In figures In wordsS.NO. SH. DESCRIPTION Amount in (Rs.)

VIII DATA NETWORKING SYSTEM

IX EARTHING

X LIGHTNING PROTECTION SYSTEM

XI UPS SYSTEM

XII AVIATION OBSTRUCTION LIGHT

Total of Electrical Works


BOQ Electrical works

In Figures In Words

I. METER BOARDS,

SUB DISTRIBUTION BOARDS AND

DISTRIBUTION BOARDS.

1.0 SUB DISTRIBUTION BOARDS (SDB)-

(ESSENTIAL SUPPLY) - TERMINAL &

OFFICE BUILDING

Supply, installation, testing and commissioning of

cubicle type totally enclosed free standing type, duly

compartmentalised, dust free, damp and vermin

proof fabricated from 2mm thick sheet steel duly

painted, internally wired, interconnection with

aluminium links, busbar chamber and having

following incoming & outgoing moulded case circuit

breakers, ammeters, voltmeters, selector switch,

indicating lamp etc. complete as per specifications

and drawings.

1.1 SDB-CA - GROUND FLOOR

INCOMER

- 1 No. 160 Amp Four Pole Moulded Case Circuit

Breaker (35 KA Ics value).

INSTRUMENTS


Sr. Description. Qty Amount ( Rs.)

Rate in (RS.)

Unit.



In Figures In Words Sr. Description. Qty Amount ( Rs.)

Rate in (RS.)

Unit.

- 1 No. 0 to 500 Volt voltmeter with selector switch.

- 1 No. 0 to 200 Amp ammeter with selector switch

and CT’s.

- 1 Set of phase indicating lamps with protection MCB

BUSBARS

- 200Amp TPN aluminium busbars.

OUTGOING

- 9 Nos. 40 to 63Amp triple pole moulded case circuit

breaker with neutral link (25 KA Ics value).

1 Set

1.2 SDB-CA - FIRST FLOOR

INCOMER

- 1 No. 300 Amp Four Pole Moulded Case Circuit


INSTRUMENTS





Rate in (RS.)

Unit.

- 1 No. 0 to 300Amp ammeter with selector switch

and CT’s.

- 1 Set of phase indicating lamps with protection

MCB.

BUSBARS


OUTGOING

- 15 Nos. 32-63Amp triple pole moulded case circuit

breaker with neutral link (25 KA Ics value).

1 Set

1.3 SDB-CA - OFFICE BUILDING

INCOMER

- 1 No. 100Amp Four Pole Moulded Case Circuit


INSTRUMENTS


- 1 No. 0 to 100 Amp ammeter with selector switch

and CT’s.




Rate in (RS.)

Unit.

- 1 Set of phase indicating lamps with protection

MCB.

BUSBARS


OUTGOING

- 13 Nos. 40-63Amp triple pole moulded case circuit

breaker with neutral link (25KA Ics value).

1 Set

2.0 METER BOARDS

Supply, installation, testing & commissioning of

cubicle type totally enclosed free standing type

moisture, dust and vermin proof Meter Board made

out of 1.63 mm thick MS sheet complete with

following equipments, including ammeter, ammeter

selector switch, voltmeter, voltmeter selector switch,

indicating lamps, CT's, internal wiring with suitable

size wires/ cable, interconnection, painting etc as

required.

2.1 METER BOARD - K-1 / LHS TYPICAL FOR

METER BOARD - K2 / RHS GROUND FLOOR

INCOMING

- 1No.63Amp FP moulded case circuit breaker (25KA

Ics Value)

- 1No. 0 to 500 Volt voltmeter with selector switch.




Rate in (RS.)

Unit.

- 1No. 60 Amp Ammeter with selector switch and

CT's.

- 1Set of phase indicating lamps with single pole

MCB.

BUSBARS

- 100Amp TPN busbar of aluminium.

OUTGOING

i) 9 Nos. meter chamber each of size 300mm x 400mm

having 6mm thick bakelite sheet and each meter

chamber consisting of following :-

a) 1 No. 0-10 Amp. Single Phase KWH Meter (dual

type)

b) 1 No. 16 Amp DP MCB (10KA )

c) 1 No. 6 way 16 Amp connector for DG signal

control cable looping.

2 Set

2.2 METER BOARD - 1 / LHS FIRST FLOOR

INCOMING

- 1No.150Amp FP moulded case circuit breaker

(35KA Ics Value).



CT's.




Rate in (RS.)

Unit.

- 1Set of phase indicating lamps with Single Pole

MCB.

BUSBARS

- 200Amp TPN aluminium busbar.

OUTGOING

i) 8 No. meter chamber each of size 400mm x 450mm



a) 1 No. 0-40 Amp. Three Phase KWH Meter (dual

type)

b) 1 No. 40 Amp FP MCCB with neutral link (25KA

Ics Value).


control cable looping

ii) 5 No. meter chamber each of size 300mm x 400mm




type)

b) 1 No. 16 Amp DP MCB (10KA )



1 Set




Rate in (RS.)

Unit.

2.3 METER BOARD - 2 / RHS - FIRST FLOOR

INCOMING


(35KA Ics Value)



CT's.


MCB.

BUSBARS


OUTGOING

i) 1 No. meter chamber each of size 400mm x 450mm




type).

b) 1 No. 32 Amp FP MCCB (25KA Ics Value)






Rate in (RS.)

Unit.

ii) 4 Nos. meter chamber each of size 400mm x 450mm




type).



control cable looping. 1 Set

2.4 METER BOARD - 3 KIOSK - FIRST FLOOR

INCOMING

- 1No.80Amp FP moulded case circuit breaker (25KA

Ics Value)



CT's.


MCB.

BUSBARS

- 150Amp TPN busbar of aluminium.

OUTGOING




Rate in (RS.)

Unit.

i) 18 Nos. meter chamber each of size 300mm x

400mm having 6mm thick bakelite sheet and each

meter chamber consisting of following :-


type).

b) 1 No. 16 Amp DP MCB (10KA)


control cable looping 1 Set

2.5 METER BOARD - 1 / LHS THIRD FOR

TYPICAL FOR METER BOARD 1 / LHS

FOURTH FLOOR

INCOMING


(25KA Ics Value).



CT's.


MCB.

BUSBARS


OUTGOING




Rate in (RS.)

Unit.





type).








type).




iii) 1 No. meter chamber each of size 400mm x 450mm




type).







Rate in (RS.)

Unit.

2.6 METER BOARD - 2 / LHS- THIRD FLOOR

TYPICAL FOR METER BOARD - 2 / LHS

FOURTH FLOOR

INCOMING


(35KA Ics Value)



CT's.


MCB.

BUSBARS


OUTGOING





type).







Rate in (RS.)

Unit.

2.7 METER BOARD - - 3 / RHS - THIRD FLOOR -

TYPICAL FOR METER BOARD - 3 / RHS

FOURTH FLOOR

INCOMING


(35KA Ics Value)



CT's.


MCB.

BUSBARS


OUTGOING





type)

b) 1 No. 40 Amp FP MCCB with neutral link (25KA

Ics Value)

c) 1 No. 6 way 16 Amp connector for DG Signal





Rate in (RS.)

Unit.





type)




2.8 METER BOARD - 4 / RHS THIRD FLOOR -

TYPICAL FOR METER BOARD 4 / RHS

FOURTH FLOOR

INCOMING


(35KA Ics Value)



CT's.

- 1Set of phase indicating lamps with Single Pole

MCB.

BUSBARS




Rate in (RS.)

Unit.


OUTGOING





type)








type)








type)





Rate in (RS.)

Unit.



2.9 METER BOARD - 1 / LHS FIFTH FLOOR

INCOMING


(35KA Ics Value)



CT's.


MCB.

BUSBARS


OUTGOING





type)





Rate in (RS.)

Unit.







type)


- 1 No. 6 way 16 Amp connector for DG Signal


2.10 METER BOARD - 2 / LHS - FIFTH FLOOR

INCOMING

- 1No. 300Amp FP moulded case circuit breaker

(35KA Ics Value)



CT's.


MCB.

BUSBARS


OUTGOING




Rate in (RS.)

Unit.




a) 1 No. 0-30Amp. Three Phase KWH Meter (dual

type)

b) 1 No. 32Amp. FP MCCB (25KA Ics Value)







type)


c) 1 Nos. 6 way 16Amp connecor for DG signal control

cable looping.





type)



cable looping. 1 Set




Rate in (RS.)

Unit.

2.11 METER BOARD - 1 / RHS - SIXTH FLOOR

INCOMING


(35KA Ics Value)



CT's.


MCB.

BUSBARS


OUTGOING





type)

b) 1 No. 40 Amp Four pole MCCB (25KA Ics Value)


cable looping.




Rate in (RS.)

Unit.





type)



cable looping. 1 Set

3.0 MCCB BOXES

3.1 Supply, installation, testing & commissioning of

MCCB in CRCA sheet steel enclosure made out of 2

mm thick suitable for 3 phase 4 wire 50Hz AC

system complete with four pole Moulded Case

Circuit Breaker (Ics Value 35KA) suitable for

incoming & outgoing termination including powder

coating etc. complete as per specification & as

required.

i) 200 Amp FP MCCB (35KA Ics Value)

1 No.




Rate in (RS.)

Unit.

4.0 DISTRIBUTION BOARDS (SPN)

4.1 Supplying and fixng following way single pole and

neutral, sheet steel, MCB distribution board, 240

volts, on surface / recess, complete with tinned

copper busbar neutral busbar, earth bar, din barm

detachable gland plate, interconnections,

phosphaized and power painted including earthing

etc. as required. (But without MCB / RCCB /

Isolator)

i) 8 way, Double door

42 Nos.

ii) 12 way, Double door

4 Nos.

4.2 Supplying and fixing following way, three pole and

neutral, prewired, sheet steel, MCB distribution

board, 415 volts, on surface / recess, complete with

loose wire box, terminal blocks, duly prewired with

suitable size FR PVC insulated copper conductor

upto terminal blocks, tinned copper busbar, neutral

link, earth bar, din bar, detachable gland plate,

interconnections, phosphatized and powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

i) 4 way, (4+12), Double door

115 Nos.




Rate in (RS.)

Unit.

ii) 6 way, (4+18), Double door25 Nos.

iii) 8 way, (4+24), Double door

5 Nos.

iv) 12 way, (4+36), Double door

7 Nos.

4.3 Supplying and fixing following rating, double pole

240 volts, Isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as

required.

i) 40 Amp

46 Nos.

4.4 Supplying and fixing following rating, double pole

(Single Phase & neutral) 240 volts, residual current

circuit breaker (RCCB) having a sensitivity current

upto 300 miliamperes in the existing MCB DB

complete with connections, testing and

commissioning etc. as required.

i) 40 Amp

46 Nos.

4.5 Supplying and fixing following rating, four pole 415

volts, Isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as

required.

i) 40 Amp

140 Nos.

ii) 63 Amp12 Nos.




Rate in (RS.)

Unit.

4.6 Supplying and fixing following rating, four pole

(Three Phase & neutral) 415 volts, residual current

circuit breaker (RCCB) having a sensitivity current

upto 300 miliamperes in the existing MCB DB

complete with connections, testing and


i) 40 Amp140 Nos.

ii) 63 Amp12 Nos.

4.7 Supplying and fixing 5 Amps to 32 Amps reating

240 volts, 'B' series, miniature circuit breaker

suitable for lighting and other load of following

poles in the existing MCB DB complete with

connections, testing and commissioning etc. as

required.

i) Single Pole

776 Nos.




Rate in (RS.)

Unit.

4.8 Supplying and fixing 5 Amps to 32 Amps rating, 240

volts, 'C' series, miniature circuit breaker suitable for

inductive load of following poles in the existing

MCB DB complete with connections, testing and


i) Single Pole

600 Nos.

4.9 Supply and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

31 Nos.

TOTAL FOR METER BOARDS,

SUB DISTRIBUTION BOARDS

AND DISTRIBUTION BOARDS. CARRIED

OVER TO SUMMARY

II. POINT WIRING

1.0 Wiring for light point / fan point / exhaust fan point /

call bell point with 1.5 sq.mm FR PVC insulated

copper conductor single core cable in surface /

recessed steel conduits with modular switch,

modular plates, suitable size GI box and earthing the

point with 1.5 sq.mm. FR PVC insulated copper

conductor single core cable etc. as required.

i) Group-C 2900 Pt.

2.0 Wiring for twin control light point with 1.5 sq.mm

FR PVC insulated copper conductor single core

cable in surface / recessed steel conduits, 2 way

modular switch, modular plates, suitable size GI. box

and earthing the point with 1.5 sq.mm. FR PVC

insulated copper conductor single core cable etc. as

required. 22 Pt.




Rate in (RS.)

Unit.

3.0 Wiring for light/ power plug with 2x4 sq.mm FR

PVC insulated copper conductor single core cable in

surface / recessed steel conduits along with 1 No. 4

sq.mm FR PVC insulated copper conductor single

core cable for loop earthing as required.

858 Mtr.

4.0 Wiring for light plug point with 4 x 4 sq.mm FR


surface / recessed steel conduit alongwith 2 no. 4

sq.mm FR PVC insulated copper conductor single

core cable for loop earthing as required.

400 Mtr.




Rate in (RS.)

Unit.

5.0 Circuit / Submain wiring alongwith earth wire with

the following sizes of FR PVC insulated copepr

conductor single core cable in surface / recessed

steel conduit as required. (for circuit wiring & MCB

controlled light point of parking basement)

i) 2 x 2.5 Sq.mm. + 1 x 2.5Sq.mm earth wire 7000 Mtr.

ii) 4 x 2.5 Sq.mm. + 2 x 2.5Sq.mm earth wire 2200 Mtr.

6.0 Wiring for light plug point with 2 x 2.5 sq.,, FR PVC

insulated copper conductor single core in surface /

recessed steel conduit alongwith 1 no. 2.5sq.mm FR

PVC insulated copper conductor single core cable

for loop earthing as required. 945 Mtr.

7.0 Wiring for metal clad socket with 2 x 6 sq.mm FR


surface / recessed steel conduit alongwith 1 no. 6

sq.mm FR PVC insulaed copper conductor single

core cable for loop earth as required.

160 Mtr.

8.0 Supplying and fixing stepped type electronic fan

regulator on the existing modular plate switch box

including connections but excluding modular plate

etc. as required. 55 Nos.




Rate in (RS.)

Unit.

9.0 Supplying and fixing following size / modules, G.I

box alongwith modular base & cover plate for

modular switches in recess etc. as required.

i) 1 or 2 Module (75mm x 75mm) 20 Nos.

ii) 4 Module (125mm x 75mm) 25 Nos.

iii) 6 Module (200mm x 75mm) 30 Nos.

iv) 8 Module (125mm x 75mm) 10 Nos.

10.0 Supplying and fixing suitable size GI box with

modular plate and cover in front on surface or in

recess, including providing and fixing 3 pin, 5/6

amps modular socket outlet and 5/6 amps modular

switch connection, painting etc. as required (For

light plugs to be used in non residential buildings)

55 Nos.

11.0 Supplying and fixing suitable size GI box with

modular plate and cover in front on surface or in

recess, including providing and fixing 6 pin, 15/16 &

5/6 amps modular socket outlet and 15/16 amps

modular switch connection, painting etc. as required.

120 Nos.

12.0 Supply and fixing 20Amps / 240 volts, SPN

industrial type socket outlet with 2 and earth metal

enclosed plug top alongwith 20Amps 'C' curve SP

MCB in sheet steel enclosure on surface or in

recessed with chained metal cover for the socket

outlet and complete with connection, testing

commissioning as required. 45 Nos.




Rate in (RS.)

Unit.

TOTAL FOR POINT WIRING CARRIED

OVER TO SUMMARY

III. SUB MAIN CABLES

1.0 Supply of following size of 1.1KV grade multicore

copper conductor XLPE / PVC insulated & PVC

sheathed armoured cable as per IS : 1554 (Part-I) as

required.

i) 2 core, 4 sq.mm2500 Mtr.




Rate in (RS.)

Unit.

ii) 2 core, 6 sq.mm250 Mtr.

iii) 2 core, 10 sq.mm300 Mtr.

iv) 4 core, 6 sq.mm3850 Mtr.

v) 4 core, 10 sq.mm3100 Mtr.

vi) 4 core, 16 sq.mm1220 Mtr.

vii) 4 core, 25 sq.mm250 Mtr.

2.0 Laying and fixing of one number PVC insulated and

PVC sheathed / XLPE aluminium conductor cable of

1.1 KV garde of size not exceeding 25sq.mm on

surface as required. 10000 Mtr.

3.0 Laying of one number PVC insulated and PVC

sheathed / XLPE power cable of 1.1 KV grade of

size not exceeding 25sq.mm direct in ground

including excavation, sand cushioning, protective

covering and refilling the trench etc. as required.

970 Mtr.




Rate in (RS.)

Unit.


sheathed / XLPE power cable of 1.1 KV grade of

size not exceeding 25sq.mm in the existing

RCC/HUME/STONEWARE/METAL pipe as

required. 500 Mtr.

5.0 Supply & making end termination with brass

compression gland & copper thimble for PVC

insulated & PVC sheathed copper conductor

armoured cable of 1.1 KV grade as required.

i) 2 core, 4 sq.mm (copper)82 Set.

ii) 2 core, 6 sq.mm (copper) 6 Set.

iii) 2 core, 10 sq.mm (copper) 6 Set.

iv) 4 core, 6 sq.mm (copper) 166 Set.

v) 4 core, 16 sq.mm (copper)58 Set.

vi) 4 core, 10 sq.mm (copper) 98 Set.

vii) 4 core, 25 sq.mm (copper)4 Set.




Rate in (RS.)

Unit.

6.0 Fabricating supply & installating following sizes of

perforated MS cable tray including horizontal &

vertical bends, reducers, tees, cross members and

other accessories as required & duly suspended from

the ceiling with M.S. suspenders & including

painting etc. as required.

i) 100mm (W) x 50mm (D) x 1.6mm Thickness

2000 Mtr.

ii) 150mm (W) x 50mm (D) x 1.6mm Thickness4000 Mtr.

iii) 300mm (W) x 50mm (D) x 1.6mm Thickness1000 Mtr.

iv) 450mm (W) x 50mm (D) x 2.0 mm Thickness500 Mtr.

TOTAL OF SUB MAIN CABLES

CARRIED OVER TO SUMMARY.

IV. LIGHT FIXTURES & FANS

1.0 Supply of the following fluorescent light fixtures

with electronics ballast of ATCO / Vossloh /

Bajaj, Push fit, bi pin rotor lamp holder,

fluorescent lamp, connecting terminal

etc.complete with alll fixing accessories as

required.




Rate in (RS.)

Unit.

1.1 4 x 24 watt T5 fluorescent lamp surface mounted

light fixture with OLC high glass high reflector

aluminium optic with 3D camellae and top reflector

complete with all accessories as required and as per

Philips International Lighting Cat. Ref. TCS 398 4 x

TL5 24W HFR TC6-H or approved equivalent.

340 Nos.

1.2 1 x 28 watt T5 fluorescent lamp box type light

fixture with decorative end caps complete with all

accessories as required and as per Bajaj Cat. Ref.

BTIR 128 or approved equivalent. 85 Nos.

1.3 2 x 28 with T5 industrial type fluorescent lamp light

fixture with epoxy white powder coated sheet steel

reflector complete with all accessories as required

and as per Bajaj Cat. Ref. BTIE 228 or approved

equivalent. 4 Nos.

1.4 1 x 28 watt recess mounting T5 fluorescent lamp

mirror optic light fixture in white powder coated

sheet steel housing with matt finish mirror reflector


Bajaj Cat. Ref. BTMR 128 or approved equivalent.

90 Nos.

1.5 2 x 28 watt recess mounting T5 fluorescent lamp

mirror optics light fixture in white powder coated

sheet steel housing with matt finish mirror reflector


Bajaj Cat. Ref. BTMR 228 or approved equivalent.

450 Nos.




Rate in (RS.)

Unit.

2.0 Supply of following compact fluorescent lamp

(CFL) light fixture with copper ballast of ATCO /

Vossloh /Schwabe / Bajaj, Lamp holder, lamp,

connecting terminals e.t.c. complete with all

fixing accessories as required.

2.1 2x55 watt compact fluorescent lamp light fixture

surface mounted round transparent luminaire with

polycarbonate housing, perforated sheet steel

reflector painted in white complete with all

accessories as required and as per Zumtobel cata ref.

FTR 680 2/55 h.f. or approved equivalent.

50 Nos.

2.2 Supply of 2x18 watt recess mounting downlighter

compact fluorescent lamp light fixture with espoxy

broken white powder coated aluminium ring,

aluminium anodised reflector, complete with all

accessories as required and as per Bajaj cata ref.

BJDR 218 or approved equivalent.

630 Nos.


compact fluorescent lamp light fixture with espoxy

broken white powder coated aluminium ring,



BJDR 118 or approved equivalent.

150 Nos.




Rate in (RS.)

Unit.

2.4 Supply of 2x18 watt surface mounting circular

shaped compact fluorescent lamp light fixture with

epoxy broken white powder coated aluminium

housing with separate anodised reflector above

lamps and glass cover below lamps complete with all


BJDS 218 or approved equivalent.

280 Nos.


compact fluorescent lamp light fixture with epoxy

broken white powder coated aluminium ring, and


accessories as required and as per Bajaj cat ref.

BJDR 113 V or approved equivalent

200 Nos.

2.6 Supply of 1x11 watt wall mounting mirror top

compact fluorescent lamp light fixture in white

powder coated sheet steel channel housing, opal

acrylic diffuser including all accessories complete

with all accessories as required and as per Bajaj cata

ref. BJC 111 or approved equivalent.

55 Nos.




Rate in (RS.)

Unit.

2.7 Supply of 1x10 watt surface mounting Bulkhead

fluorescent lamp light fixture including all

accessories complete as required and as per Bajaj

cat. ref. BJDB 10 CFL or approved equivalent.

20 Nos.

3.0 Supply of 1x150 watt surface mounted CDMT lamp

light fixture with high quality injection moulded

aluminium, white optical coating reflectors and

thermally hardened glass, integral control gear with

IP -65 protection level including all accessories,

complete as required and as per Philips cat ref. mini

300 DWP 333 or approved equivalent.

32 Nos.

4.0 Supply of 1x250 watt surface mounted, metal halide

lamp medium bay light ficture with integral control

gear, diecast aluminium housing, prismatic

reflectors, closed version with protection level IP -

65 including all accessories complete as required

and as per Philips cat. Ref, HPK 205 1xHPI - BU

250 PR or approved equivalent.

15 Nos.

5.0 Supply of 1x400 watt surface mounted metal halide

lamp medium bay light fixture with integral control

gear, diecast aluminium housing, prismatic reflector,

closed version with IP - 65 protection level including

all accessories, complete as required and as per

Philips cata ref. HPK 225, 1xHPK - BU 400 PR or

approved equivalent.

15 Nos.




Rate in (RS.)

Unit.

6.0 1 x 3 watt recess mounting ultra bright LED spot

light with electronic driver complete with all

accessories as required and as per Havells Cat. Ref.

LHOD03103374 (3K) or approved equivalent.

85 Nos.

7.0 Supply, installation, testing & commissioning of 1 x

120 watt LED street light fixture comprising of

extruded aluminium housing with prewired gear tray

with LED's, heat resistant flat glass suitably gasket

for IP-65 protection level, complete with all

accessories as requested and as per MIC Electronics

Ref. Digilight O525. 15 Nos.

8.0 Supply & erection of 9 metre (above ground)

galvanised OCTAGONAL MS tubular pole with

single arm bracket (Bajaj Cata. Ref. BOP 9030)

suitable for mounting single street light luminaire.

Complete with foundation and base plate including

foundation bolts. 15 Nos.


70 watt, metal halide lamp decorative indirect light

column (IP-65) with die-cast aluminium housing of

canopy, supplied with high finish extruded

aluminium column of height 3 metre with base

flange complete with lamp, control gear etc. as

required of Philips Cata Ref. CPP 735/1xCDM-70

W. 15 Nos.

10.0 Supply, installation, testing & commissioning of 9

watt, LED surface mounted light fixture of sheet

steel body and P5 louvere system with integral driver

complete with all accessories etc. as required of

Crompton Greaves Cata Ref. LCDSP081-09/CDL or

approved equivalent.

30 Nos.




Rate in (RS.)

Unit.


watt, LED recessed downlighter complete with

suitable driver & all accessories etc. as required of

Crompton Greaves Cata Ref. LCDLV108G/WW or

approved equivalent. 50 Nos.


250 watt metal halide integeral flood light fixture

with controlgear and all accessories complete as

required of Philips Cata. Ref. or approved

equivalent.

i) MWF 330 AK / 250 (Asymmetrical) 10 Nos.

ii) MWF 330 SK / 250 (Symmetrical) 10 Nos.




Rate in (RS.)

Unit.


400 watt metal halide integeral flood light fixture

with controlgear and all accessories complete as

required of Philips Cata. Ref. or approved

equivalent.

i) MWF 330 AK / 400 (Asymmetrical)

10 Nos.

ii) MWF 330 SK / 400 (Symmetrical)

10 Nos.


Solar Street lighting system MV-8 (Tata BP Solar or

equivalent with 1 x 26W Low Pressure Sodium

Vapour Lamp (3500 lumens) 3 day autonomy

powered by 150Wp Solar array and 12 Volt, 150AH

@ C120 Battery Backup on 6metre high MS tubular

pole duely painted. 10 Nos.

15.0 Supply, Installation, Testing & Commissioning of 1

x 8 watt LED Bollard light fixture of die cast

aluminium with integral driver complete with all

accessories as required and as per Crompton Cat.

Ref. LL BIL 108/MP or approved equivalent.

20 Nos.

16.0 Supply of following sizes of ceiling fan with

regulator complete with double ball bearing, motor,

blades, down rod, canopy capacitor etc. complete as

required.




Rate in (RS.)

Unit.

i)

Size 1200mm.

40 Nos.

ii)

Size 1400mm.

5 Nos.

17.0 Supply and fixing of following size of Air

Circulating fan with regulator complete suitable for

single phase 240 V A.C supply of Havells /

Almonard or approved equivalent.

i)

600mm.

20 Nos.

18.0 Supply of following sizes of wall fan of the

following sizes complete as required.

i)

Size 300mm.

40 Nos.

19.0 Supply of following sizes of single phase 240 volts

heavy duty exhaust fan complete with all accessoreis

such as, motor, blade, louvres, capacitor etc.

including all accessories as required.

i)

450mm dia, 1400 RPM.

10 Nos.

20.0 Installation, testing and commissioning of prewired

flourescent / compact flourescent fitting of all types

complete with all accessories and tubes etc. directly

on ceiling/wall including connection with 1.5 sq.mm

PVC insulated copper conductor single core cable

etc. as required.

784 Nos.




Rate in (RS.)

Unit.

21.0 Installation, testing and commissioning of pre-wired

fluorescent fitting / compact fluorescent fitting of all

types, complete with all accessories and tube etc.,

including supplying and fixing ball and socket

arrangement, 2 no. down rods of 20mm dia x 1.6mm

thick steel conduit upto 30cm length, painting and

wiring the down rods and connection with 1.5sq.mm

FR PVC insulated, copper conductor, single core

cable and earthing etc. as required.

200 Nos.


flourescent / compact flourescent / LED lamp

fittings of all types complete with al accessories and

tubes etc. on false ceiling including connection with

1.5sq.mm PVC insulated copper conductor single

core cable etc. as required.

1455 Nos.




Rate in (RS.)

Unit.


metal halide fitting complete with all accessories and

lamps etc. direct on surface including connection

with 2.5 sq.mm PVC insulated copper conductor

single core cable etc. as required.

102 Nos.

24.0 ITC of ceiling fan including wiring the down rods of

standard length (upto 30cm) with 1.5sq.mm FR PVC

insulated, copper conductor, single core cable etc. as

required. 45 Nos.

25.0 Installation of exhaust fan upto 450mm sweep in the

existing opening including making the holes to suit

the size of the above fan making good the damages

connection, testing and commissioning etc. as

required. 10 Nos.

26.0 Extra for fixing the louvers/shutter complete with

frame for exhaust fan of all sizes. 10 Nos.

27.0 Numbering of ceiling fan / exhaust fan / light fittings

as required. 10 Nos.

28.0 Erection of steel tubular pole of length exceeding 8

metres but not exceeding 10 metres in cement

concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded

stone aggregate 40mm nominal size) foundation

including excavation and refilling etc. as required.

15 Nos.

29.0 Supply & fixing extra conduit down rod of 20cm

length G.I pipe, 15mm dia, heavy gange including

painting as required (Note. More than 5cm length

shall be rounded to the nearest 10cm and 5cm or less

shall be ignored. 500 Nos.




Rate in (RS.)

Unit.

30.0 Installation, testing and commissioning of 120 LED

street light fixture on existing 9 metre high

OCTAGONAL street light pole. 15 Nos.

31.0 Installation, testing and commissioning of LED

Bollard light fixture direct in ground 20 Nos.

32.0 Supplying, installation, testing & commissioning of

High Mast tower of 25 metre mounting height for

area lighting on existing foundation, as per attached

specifications and comprising broadly the following :

a) Galvanised steel mast polygonal in section with base

plate and made of detechable galvanised portion not

more than three in length.

b) Sliding lantern carriage capable of moving up and

down the mast complete with self aligning

mechanism guides and capable of receiving required

Nos. of luminaires.

c) Raising and lowering gear lantern carriage (but

without power tool) mechanism suitable to operate

with electrically operated power tool.

d) Set of hoisting ropes made of stainless steel wires.

e) Drums for winding of wires ropes with assembly.

f) Double drum winch without integral power drive

unit.




Rate in (RS.)

Unit.

g) Required multicore copper flexible two nos. power

cables and wiring the lantern carriage with

luminaires.

h) Termination box for incoming main complete with

suitable switchgear.

i) Fabrication/ fixing of aviation obstruction lights

(with neon spiral lamps)

j) GI lightning finials at the top of high mast.

k) Holding down bolts

l) Galvanised head frame and GI canopy on top of the

mast.

m) Manual handle for lowering/ raising of lantern

carriage. 4 Nos.

33.0 Providing suitable RCC foundation as required for

25metre high mast including excavation, reinforced.

Cement concrete disposal of surplus malba / soft

rock stone / hard rock stone etc. as required. Mix or

aggregate cement concrete shall be M-25 & levelling

course of 15cm shall be 1:4:8 cement concrete.

4 Nos.




Rate in (RS.)

Unit.

34.0 Supply & fixing high efficiency low glare

assymmetrical flood lighting luminaire (non integral

type) suitable for use of with high pressure tubular

metal halide lamp 2 x 400 watt complete with

controlgear in IP65 enclosure, lamps, heat resistant

toughened front glass, hot drop galvanised MS

mounting brackets complete as required of Philips

Cata. Ref. RVP501 2 x HPI T 400 N / Bajaj Cata.

Ref. BGENF 22 R orapproved equivalent.

36 Nos.

TOTAL OF LIGHT FIXTURES & FANS


V. CONDUITING FOR TELEPHONE/ DATA

NETWORKING / SMATV SYSTEM/

SECURITY & SURVEILLANCE SYSTEM/

PUBLIC ADDRESS SYSTEM/ FIRE

DETECTION AND ALARM SYSTEMS

1.0 Supply and fixing of following sizes of steel conduit

alongwith the accessories in surface/ recess

including painting in case of surface conduit or

cutting the wall and making good the same in case of

recessed conduit as required.

a) 20mm dia 5500 Mtr.

b) 25mm dia 9300 Mtr.

c) 40mm dia 1000 Mtr.




Rate in (RS.)

Unit.

d) 50mm dia 300 Mtr.

2.0 Supply and fixing metal box of following sizes

(nominal size) on surface or in recess with suitable

size of phenolic laminated sheet cover in the front

including painting etc. as required.

a) 75mm x 75mm x 60mm deep. 50 Nos.

b) 200mm x 150mm x 75mm deep. 75 Nos.

TOTAL OF CONDUITING FOR TELEPHONE/

SECURITY & SURVEILLANCE SYSTEM/

FIRE DETECTION AND ALARM SYSTEMS

CARRIED OVER TO SUMMARY

VI.INTELLIGENT ADDRESSABLE FDA SYSTEM

A FIRE PANELS & SOFTWARE




Rate in (RS.)

Unit.


Microprocessor based 5 loop , Networkable

Analogue addressable type fire alarm control panel

with 640 character LCD display, The panel should

be equipped with sufficient numbers of loop with

20% spare capacity with each loop shall have a

capacity of 250 analog addressables in one loop,

QWERTY style alphanumeric keypad for the field

programming and control of the fire alarm system,

panel shall maintain a history file of the last 2000

events, 240 volts AC power supply, automatic

battery charger, 24 volts sealed lead acid batteries

sufficient for 24 hours normal working and then be

capable of operating the system for 2 hours during

an emergency conditions as required. The Network

speed of the panel shall be atleat 3MBPS. (UL 9th

Edition Approved)

1 No.

2.0 Supply, installation, testing & commissioning of UL

Listed BACNET Gateway for Integration with BMS

Systems 1 No.

3.0 Supply, installation, testing & commissioning of The

GUI based Network Control Station with UL Listed

software capable of graphically representing each

facility being monitored with floor plans and icons

depicting the actual locations of the various systems;

and / or sensors’ locations. The NCS shall have a

desktop with following specification:

1 No.




Rate in (RS.)

Unit.


Intel Pentium Core II Duo (tm)-processor, operating

at a minimum of 1GB of RAM, , 80 Gbyte hard disk,

mouse, 32X CD-ROM, 3PCI / 1 ISA expansion

slots, sound card, 200 watt power supply, and SVGA

graphics with a screen resolution of 1024 x 768.

1 No.

5.0 Supply, installation, testing & commissioning of Flat

Screen 17 Inch Monitor0 r/o


Laser Printer 1 No.

7.0 Supply, Installation, Testing and commissioning of

UL listed repeater panel with 640 character backlit

LCD display, functional keys like acknowledge,

signal silence, system reset, lamp test etc.

3 Nos.

B DIGITAL VOICE EVACUATION SYSTEM

WITH FIRE FIGHTER COMMUNICATION

SYSTEM


Integrated 8 channel Digital Voice Evacuation

and 2 way Communication Fire Fighters System

capable to supervision of all the speaker circuits,

with required suitable amplifiers and accessories

required to compelete the system. The equipment

shall be of same make as panel.

1 No.




Rate in (RS.)

Unit.

2.0 Supply, installation, testing & commissioning of Fire

panel supervised 70db-84db Ceiling Mounted

Hooter Cum Speakers as specified & same make as

of panel. 15 Nos.

3.0 Supply, installation, testing & commissioning of Fire

panel supervised 70db-84db Wall Mounted Hooter

Cum Speakers as specified & same make as of

panel. 15 Nos.


way communication Fire Fighter's Telephone Jack

10 Nos.


way communication Fire Fighter's Handset 10 Nos.

C DETECTORS & INITIATIING DEVICES


Automatic Floating Sensitivity type Analog

addressable Photo thermal detector (with dual

thermal element and a photo element) with

mounting based LED, Address Switch to programme

the detectors, complete as required.

520 Nos.


Multi Cooperative Sensing Analog addressable Rate

of Rise Cum Fixed temperature detector with

mounting based LED, Address Switch to programme

the detectors complete as required.

120 Nos.




Rate in (RS.)

Unit.


Addressable Beam detector with 4 manual & 2

acclimate senstivity settings, Transmitter/receiver

built into same unit, Six user-selectable sensitivity

levels, 16' to 328' protection range, Digital display,

Built-in automatic gain control compensates for

signal deterioration from dust buildup, Address

Switch to programme the detectors, complete as

required

2 Nos.


Analog Addressable air duct smoke detector with

an efficient housing design and sampling tubes

mounting based LED, Address Switch , complete as

required.

15 Nos.


Addressable Manual Call Station for initiation of fire

alarm 40 Nos.




Rate in (RS.)

Unit.

D MODULES & NOTIFICATION DEVICES


Fault isolator module for isolating shorted,

dewired and loose circuits between two successive

fault isolators with automatic resetting arrangement

25 Nos.


Addressable control modules for driving outputs

like Hooters, fire fighter jacks, AHU, dampers etc.

25 Nos.


Addressable monitor modules to give input to FAS

like Sprinkler Flow Switch & WLD Monitoring

15 Nos.


Response indicator 200 Nos.


Directional Sounders with 20 hz to 20 khz

operating frequecy with minimum 8 distinct sound

patterns to indicate corridors, Exit doors, Move

upward, move down ward etc. to direct Occupants

for fast & safe Evacuation as specified in NFPA 72 -

2007 edition.

15 Nos.




Rate in (RS.)

Unit.


Hooter with min 75dB output

40 Nos.


Hooter cum Strobe with mini 75DB output and

110 cd. The strobes shall be synchronized for better

evacuation. 10 Nos.

E CABLES AND CONDUITS

1.0 Supply and drawing of following sizes of FR PVC

insulated copper conductor single core cable in the

existing surface/recessed steel / PVC conduit as

required.

a) 2 x 1.5 Sq.mm. 1500 Rmt.

b) 4 x 1.5 Sq.mm. 1000 Rmt.

c) 2 x 4.0 Sq.mm. 800 Rmt.

TOTAL INTELLIGENT ADDRESSABLE FDA

SYSTEM CARRIED OVER TO SUMMARY.




Rate in (RS.)

Unit.

VII WIRING FOR TELEPHONE SYSTEM

1.0 Supply and fixing of jack type modular type

telephone outlet (RJ-11) on suitable MS box

complete with cover plate, termination of cable as

required. 85 Nos.

2.0 Supply and fixing metal box of following sizes

(nominal size) on surface or in recess with suitable

size of phenolic laminated sheet cover in the front

including painting etc. as required.

a) 200mm x 150mm x 100mm deep.

20 Nos

3.0 Supplying and drawing following pair, 0.5 sq.mm

FR PVC insulated copper conductor, unarmoured

telephone cable in the existing surface / recessed

steel / PVC conduit as required.

a) 2 Pair

3,000 Rmt

b) 4 Pair

500 RMT

4.0 Supply, installation, testing and commissioning of

following sizes of telephone distribution board in a

M.S box with hinged cover/door complete with

krone type tag block with double jumpering facility

mounted on a bakelite sheet etc. including

terminations of cable as required.

a) 10 Pair telephone distribution board.

50 Nos.




Rate in (RS.)

Unit.

b) 20 Pair telephone distribution board.

5 Nos.

c) 50 Pair telephone distribution board.

5 Nos.

d) 100 Pair telephone distribution board.

3 Nos.

e) 1000 Pair telephone distribution board.

1 No.

5.0 Supply and drawing of following sizes of 0.50mm

diameter annealed tinned copper conductor PVC

insulated and PVC sheathed armoured telephone

cable in ground or on existing cable tray.

a) 5 Pair

400 Rmt

b) 10 Pair

600

c)20 Pair

400 Rmt

d) 50 Pair

500 Rmt




Rate in (RS.)

Unit.

e)100 Pair

350 Rmt

TOTAL OF TELEPHONE SYSTEM CARRIED

OVER TO SUMMARY.

VIII DATA NETWORKING SYSTEM


following cables.

i) 23 AWG UTP Data Cable (Cat 6 ) Gigaspeed in the

existing conduit/ under floor trunking

1500 Rmt


following Jack Panel.

i) 24 Port CAT 6 Jack Panel.

5 Rmt

3.0 Supply & fixing of 19 inch Standard 9/12U Rack

with all accessories.2 No.


following RJ-45 connectivity.

i) Simplex Faceplate with RJ-45, information outlet

with shutter compliant to TIA 568A/B with colour

coding including MS box. 100 No.

TOTAL OF DATA NETWORKING SYSTEM





Rate in (RS.)

Unit.

IX. EARTHING

1.0 Earthing with GI earth plate 600mm x 600mm x

6mm thick including accessories and providing

masonary enclosure with cover plate having locking

arrangement and watering pipe etc.(without charcoal

or coke and salt) complete as required.

6 Set

2.0 Earthing with copper earth plate 600mm x 600mm x



arrangement and watering pipe etc.(but without

charcoal or coke and salt) complete as required.

2 Set

3.0 Extra for using salt & coke of GI or Copper plate

earth electrode as required. 8 Set

4.0 Providing and fixing 25 mm x 5 mm GI strip on

surface or in recess for connections etc. as required.

500 Mtr.

5.0 Earthing with G.I. Earth pipe 4.5 mtrs. long 40mm

dia including accessories and providing masonry

enclosure with cover plate having locking

arrangement and watering pipe etc. (but without

charcoal or coke and salt) as required. 4 Set

6.0 Extra for using salt and coke for pipe earth electrode

as required. 4 Set

7.0 Providing & fixing 6 SWG dia G.I. wire on surface

or in reccess for loop earthing as required.

100 Mtr.




Rate in (RS.)

Unit.

TOTAL OF EARTHING CARRIED OVER TO

SUMMARY.

X. LIGHTNING PROTECTION SYSTEM

1.0 Providing and fixing of lightning conductor finial

made of 25mm dia 300mm long GI tube having

single prong at top with 85mm dia 6mm thick GI

base plate including holes etc. complete as required.

6 Set

2.0 Rivetting, sweating and soldering of copper/GI tape

(with another copper/GI tape, base of the finial or

any other metallic object) as required. 100 Nos.

3.0 Providing and fixing GI tape 20mm x 3mm thick on

parapet or surface of wall for lightning conductor as

required. (for Horizontal run). 850 Mtr.

4.0 Providing and fixing GI tape 20mm x 3mm thick for

parapet or surface of wall for lightning conductor as

required. (for Vertical Run). 350 Mtr.

5.0 Providing and fixing testing joint made of 20mm x

3mm thick GI strip 125mm long with 4No. G.I.

bolts, nuts, check nuts, spring washer etc. complete

as required. 25 Set

6.0 Providing and laying GI tape 32mm x 6mm thick

from earth electrode directly in ground as required.

500 Mtr.




Rate in (RS.)

Unit.

7.0 Earthing with GI earth plate 600mm x 600mm x



arrangement and watering pipe etc.(with coke and

salt) complete as required. 25 Set

8.0 Providing and fixing GI pipe complete with GI

fittings including trenching and refilling etc.

i) 50mm dia (nominal) bore. 200 Mtr.

TOTAL OF LIGHTNING PROTECTION

SYSTEM CARRIED OVER TO SUMMARY.

XI. UPS SYSTEM

1.0 Supply Installation, Testing Commissioing of 2 x

20 KVA UPS Systems, High performance industrial

grade UPS, fully digital and microprocessor

controlled with following key features –

2 Set

- Wide input voltage range 400V + 20% or 320V –

480V and wide frequency 45Hz. To 65Hz.

- 3 Phase input / 3 Phase output

- Inbuilt Static bypass and manual maintenance

bypass.

- Input phase sequence correction

- Temperature Dependent battery Charging




Rate in (RS.)

Unit.

- Energy Backfeed Protection circuitry as standard.

- Software as Standard provided with 1.5-2 Mtr cable

with the UPS for Monitoring

- Very wide soft start 0-30 seconds (to ensure smooth

change over to DG supply and vice versa)

Sealed Maintenance Free (SMF) VRLA Batteries

for better than 15 Minutes back up with full 20

KVA Load. Complete with battery racks, inter

connecting links, and inbuilt DC isolator with fuse

protection. 1 Nos

(Amararaja)1Set = 12V, 65AH, 48 Nos.

TOTAL FOR UPS SYSTEM CARRIED OVER

TO SUMMARY

XII. AVIATION OBSTRUCTION LIGHT

1.0 Supplying, erection, testing and commissioning of

Aviation lights with LED lamp with flasher 170mm

suitable for 230V AC complete with fitting including

photochromatic switch for automatic ON/OFF of

Aviation lights complete as per Electronic make or

approved equivalent. 2 Set

2.0 Wiring for Aviation light with 3 core 2.5 sq.mm

PVC insulated PVC sheathed copper conductor

armoured cable from Ground Floor DB to Aviation

light as required. 250 M

TOTAL OF AVIATION OBSTRUCTION

LIGHT CARRIED OVER TO SUMMARY.

2.0


In figures In words

1.00 SUBSTATION & DG SET WORKS

Total

SH. DESCRIPTIONS.No.

BOQ FOR Upgradation Of INTER STATE BUS TERMINAL AT KASHMERE GATE DELHI -110006

SECTION - I (Sub station and D G , phase - I)

SUMMARY SHEET FOR Substation and D G WORKS

Amount in (Rs.)

7 - 127

BOQ For SS and DG

In Figures In Words

1.0 H.T. METERING PANEL


floor mounted, dust, damp and vermin proof, cubicle

HT. Metering Panel made out of 2mm thick CRCA

sheet steel complete with 5Amp electronic trivector

meter, C.T.'s of 200/5Amp 1.0 Class, 15VA Burden,

and P.T's of 11KV/ Ö3, 110V/ Ö3, 50VA,

conforming to relevant IS Standards and complete as

required. C.T.'s, P.T.'s and trivector meter shall be

got tested and approved from local electricity supply

authority.

1 Set

2.0 11 KV 4 BREAKER VCB PANEL BOARD

Supply, installation, testing & commissioning of 11

KV 4 Breaker Vacuum Circuit Breaker Panel Board

comprising of 1 No. incoming & 3 Nos. outgoing

breakers. Each incoming, outgoing breaker panel

shall be metal clad floor mounting complete as per

specification and as described.

INCOMING PANEL - 1 NO.


Sr. Description. Qty Unit.

Rate in (RS.)

Amount ( Rs.)


BOQ For SS and DG

In Figures In Words Sr. Description. Qty Unit.

Rate in (RS.)

Amount ( Rs.)

i) 1 No. 350 MVA, 630Amp 11KV, Vacuum Circuit

Breaker with motorised spring charged and manual

closing mechanism. Shunt trip coil shall operate in

110V DC voltage derived through a power pack.

ii) 3 No. Single Phase double core current transformer

160/5 Amp epoxy cast insulated class of insulation E.

- Core 1-15VA burden class 1.0 for metering.

- Core 2-15VA burden class 5P10 for protection.

iii) 3 Nos. Line PT 11KV/ /3, 110V/ /3, 50VA class

1.0 epoxy cast resin type.

iv) IDMT relay with 2 O/C and 1 E/F element with hand

reset contacts & indicator (flag) (O/C- setting 50-

200% & E/F setting 20-80%) with protection for O/C

and E/F. (self powered version) (MC-31).

v) 1 No. Anti Pumping device.

vi) 1 No. Circuit breaker control switch for electrical

(T/N/C).

vii) 1 No. limit switch for test & service position.

viii) 1 No. Voltmeter (0-12KV) with selector switch.

(96mm square)


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

ix) 1 No. Ammeter (0-200Amp) with selector switch.

(96mm square).

x) 1 No. electronic type digital energy analyser having

30 days memory and parameters of KW, KWH,

Power factor, frequency etc. Suitable for BMS

compatible with all accessories.

xi) 1 Set of following indicating lamps.

- Red, Yellow & Blue for phase indication.

- Amber for Trip indication.

- Red `ON' Green `OFF'

- Spring charge indication.

Auto trip indication.

xii) 1 No. Power pack for trip coil operation.

xiii) 1 No. control Transformer of 1KVA for giving supply

to indication lamps etc having 11 KV/415-230V AC

rating epoxy cast resin dry type Transformer. The

connection for control transformer shall be taken

from the cable side before the circuit breaker tapping.

xiv) 1 No. hooter.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

xv) 1 No. master trip relay.

xvi) 1 Set of fuses, ferrules, wiring etc. as required.

xvii) Brass gland suitable for 1 No. 3 core 300Sq.mm.

11KV XLPE cable.

OUTGOING PANEL - 3 NOS. Each with

i) 1 No. 350MVA, 630Amp 11KV, Vacuum Circuit

Breaker with motorised spring charged and manual

closing mechanism. Shunt trip coil shall operate on

110V DC voltage derived through a power pack.

ii) 3 No. Single Phase double core current transformer

55 /5Amp epoxy cast insulated class of insulation E.

- Core 1-15VA burden class-1.0 for metering.

- Core 2-15VA burden class 5P10 for protection.

iii) IDMT relay with 2 O/C and 1 E/F element with hand

reset contacts & indicator (flag) (O/C Setting 50-

200% & E/F Setting 20-80%) with highset

instantaneous protection for O/C and E/F (self

powered version) (MC-61).

iv) 1 No. Anti Pumping device.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

v) 1 No. VAA33 auxiliary relay for transformer fault,

alarm and trip suitable for 230 V AC supply.

vi) 1 No. Circuit breaker control switch for electrical

(T/N/C).

vii) 1 No. limit switch for test & service position.

viii) 1 No. Ammeter (0-100 Amp) with selector switch.

(96mm Square).

ix) 1 Set of following indicating lamps (LED Type).

- Red, Yellow & Blue for phase indication.

- Red 'ON' Green 'OFF'.

- Amber for trip indication.

- Spring charge indication.

- Auto trip indication.

x) 1 Set of fuses, ferrules, wiring etc. as required.

xi) 1 No. hooter.

xii) 1 No. master trip relay.

xiii) 1 No. power pack for trip coil operation.

Brass gland suitable for 1 No. 3 core 240sq.mm

11KV XLPE cable.

1 Set


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

3.0 TRANSFORMER

(CAST RESIN DRY TYPE WITH OLTC& AVR,

)

Supply, installation, testing and commissioning of

Cast Resin Dry Type 1000 KVA, 11 / 0.433KV, 3

phase, 50 Hz, DYn -11, vector group copper wound,

(with OLTC & AVR) Class F insulation associated

with winding temperature indicator / controller

actuated by means of resistance temperature detector

embedded in LV winding, indoor type transformer

with approximately 5 % impedence tapping for off

load operation on HV side in steps of 2.5% for +

7.5% having cable end boxes on HV side suitable for

3 core x 240 Sq.mm XLPE cable of 11 KV grade and

1600 Amp bus trunking arrangement on LV side with

neutral brought out separately including supplying

and laying of copper conductor multicore control

cable from transformer to HT breaker for safety

tripping suitably mounted on MS channel including

supplying and grouting of suitable MS channels with

all accessories and conforming to IS: 11171: 1985 &

as per specifications attached complete in all respects

as required at site.

3 No.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

4.0 BUS TRUNKING

Supplying, installing including suspension, testing and

commissioning of bus trunking arrangement in

convenient sections complete with aluminium busbars

for use on, 3 phase, 4 wire, 415 volts, 50 Hz, A.C.

supply for following current capacity, including jointing

of sections, flexible joints, expansion joints, bends and

earthing with 2 runs of galvanised iron strips etc. as

required.

i) 800 Amp

60 M

ii) 1250 Amp

120 M

iii) 1600 Amp

65 M

(Note: The bus trunking shall be measured along the

length of enclosure. The aluminium/ copper strips

which will go inside LT panels & end termination

box of transformers shall not be taken into

measurement of bus trunking quantity).

5.0 H.T. CABLE

Supply of following sizes 11KV XLPE aluminium

conductor armoured cable conforming to IS : 7098

complete as required.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

i)3 Core, 300sq.mm 100 M

ii)3 Core, 240sq.mm 75 M

6.0 Laying of one number PVC insulated and PVC sheathed

/ XLPE power cable of grade exceeding 1.1 KV but not

exceeding 11KV of size exceeding 120 sq.mm. but not

not exceeding 400 sq.mm. direct in ground including

excavation, sand cushioning, protective covering and

refilling the trench etc. as required.

100 M

7.0 Laying of one number PVC insulated and PVC sheathed

XLPE power cable of grade exceeding 1.1 KV but not

exceeding 11KV of size not exceeding 400 sq.mm.

direct in the existing masonary open duct as required.

75 M

8.0 Supply and making INDOOR cable end termination with

heat shrinkable joint kit complete with all accessories

including lugs suitable for the following sizes of three

core XLPE aluminium conductor cable of 11KV grade

as required.

i) 3 Core, 240 sq.mm 6 Set


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

9.0 Supply and making OUTDOOR cable end termination

with heat shrinkable joint kit complete with all

accessories including lugs suitable for the following

sizes of three core XLPE aluminium conductor cable of

11KV grade as required.

i) 3 Core, 300sq.mm 2 No.

10.0 MAIN L.T. PANEL (NORMAL SUPPLY)

Supply, installation, testing & commissioning of Main

L.T. Panel (Normal Supply) Extensible type suitable for

415 volts (nominal) 3 phase 4 wire, 50 Hz, A.C. Supply

totally enclosed type with free standing floor mounted

dust and vermin proof indoor type fabricated from 2mm

thick MS sheet complete with busbars, ammeter,

ammeter selector switch, voltmeter, voltmeter selector

switch, indicating lamps, protection relays, CT's

protection fuses, interconnections with suitable size of

copper leads/solid aluminium strips/rod & interlocking

between incomer breaker & buscouplers and having

following incoming and outgoing Air Circuit Breakers,

MCCB's as per the drawing and specifications.

INCOMER BREAKERS


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

- 3 Nos. 1600 Amp FP manual operated horizontal

drawout type (MDO) Air Circuit Breaker with

microprossor realeased for O/L, S/C & E/F

protection.

BUSCOUPLER BREAKERS

- 2 Nos.1600Amp FP manual operated horizontal

drawout type (MDO) Air Circuit Breaker as

buscoupler with interlocking arrangement with

incomers.

- 2 Sets of indicating lamps for ON & OFF of

buscoupler.

BUSBARS

- 2000 Amp TPN busbars of aluminium alloy.(Bus

Section -I, II & III)

OUTGOING BREAKERS WITH

INSTRUMENTS

i) 3 Nos. 1250 Amp TP manually operated horizontal

drawout type Air Circuit Breaker with neutral link

and ACB complete with thermal magnetic realese for

O/L & S/C and with ON / OFF indicating lamps.

ii) 2 Nos. 800 Amp TP manually operated horizontal





BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

iii) 5 Nos. 630 Amp TP manually operated horizontal




iv) 4 Nos. 630 Amp TP Moulded Case Circuit Breaker

with neutral link and complete with microprocessor

realease for O/L & S/C and ON / OFF indicating

lamps.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

v) 2 Nos. 300 Amp TP Moulded Case Circuit Breaker



lamps.

vi) 3 Nos. 200 Amp TP Moulded Case Circuit Breaker


realease for O/L & SC and ON / OFF indicating

lamps.

vii) 5 Nos. 160 Amp TP Moulded Case Circuit Breaker



lamps.

viii) 4 Nos. 125 Amp TP Moulded Case Circuit Breaker



lamps.

ix) 3 Nos. 100 Amp TP Moulded Case Circuit Breaker



lamps.

INSTRUMENTS ON INCOMER BREAKERS

i) 9 Nos. 0 to 500 Volt digital voltmeter (96mm square)

(three for each incoming breaker).

ii) 3 Nos. 0 to 1600 Amp digital ammeter (96mm

square) with CT's (for 1000 KVA Transformer

incoming breaker) and selector switch.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

iii) 3 Sets of phase indicating lights (RYB) with

protection mcb's (one set for each incoming breaker).

iv) 3 Sets breaker 'ON' & 'OFF' indicating lamp (one set

for each incoming breaker).

v) 3 Sets trip circuit healthy indicating lamp (one set for

each incoming breaker).

vi) 3 Sets auto trip indicating lamp (one set for each

incoming breaker).

vii) 3 Sets of 3 Phase O/V and U/V relay with time delay

(O/V - 110% to 140% U/V - 40% to 80%) (one set with

each Transformer incoming).

viii) 3 Set of dual ratio CT's of 1600/ 5Amp ratio each for

APFC relay (with 1000KVA transformer incomer).

ix) 3 Nos. electronic type Digital energy analyser having

30 day memory and parameters of KW, KWH, power

factor, frequency etc. (one for each incoming

breaker).

x) 3 Nos. master trip relay (one for each incoming

breaker).

xi) 3 Nos. trip circuit supervision relay (one for each

incoming breaker). 1 Set


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

11.0 MAIN L.T. PANEL (ESSENTIAL SUPPLY)


Main L.T. Panel (Essential Supply) Extensible type

suitable for 415 volts (nominal) 3 phase 4 wire, 50

Hz, A.C. Supply totally enclosed type with free

standing floor mounted dust and vermin proof indoor

type fabricated from 2mm thick MS sheet complete

with busbars, ammeter, ammeter selector switch,

voltmeter, voltmeter selector switch, indicating

lamps, protection relays, CT's protection fuses,

interconnections with suitable size of copper

leads/solid aluminium strips/rod . PLC shall be

provided for Load Management by sensing of total

load on various bus section and closing / opening of

incomer & bus coupler breakers and interlocking,

auto / manual selector switch, and having following

incoming and outgoing Air Circuit Breakers, MCCB's

as per the drawing and specifications.

INCOMER BREAKERS


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

- 2 Nos. 1250 Amp FP Electrical operated horizontal

drawout type (EDO) Air Circuit Breaker with

microprocessor realease for O/L, S/C & E/F

protection.

- 1 No. 630 Amp FP Electrical operated horizontal

drawout type (EDO) Air Circuit Breaker with

microprocessor realease for O/L, S/C & E/F

protection.

AUTO OPERATION OF INCOMER /

BUSCOUPLER ACB's.

i) Load management through Micro PLC shall be

provided to achieve the following functions.

ii) Auto ON / OFF incomer breaker as per load.

iii) Buscoupler switching.

iv) Interlocking.

v) Necessary hardware shall be provided to achieve

above functions including micro PLC with real time

clock, digital inputs / outputs, MMI with 2 line

display, power supply, auxillary relays, PB's

indication etc. & software for the above. All items

required for complete operation whether or not list in

BOQ shall deemed to be included in quoted rates


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

vi) Automatic system shall be user friendly and shall

have manual over ride.

BUSCOUPLER BREAKERS

- 2 Nos. 1250Amp FP Electrically operated horizontal

drawout type (EDO) Air Circuit Breaker as

buscoupler with interlocking arrangement with

incomers and ACB complete with thermal magnetic

realease for O/L & S/C protection.

- 2 Sets of indicating lamps for ON & OFF of

buscoupler.

BUSBARS

1600 Amp TPN busbars of aluminium alloy.(Bus

Section -I, II & III)

OUTGOING BREAKERS WITH

INSTRUMENTS

i) 1 No. 630 Amp TP manually operated horizontal

drawout type (MDO) Air Circuit Breaker with neutral

link and ACB complete with with thermal magnetic

realease for O/L & S/C protection and with ON / OFF

indicating lamps.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

ii) 5 Nos. 400 Amp TP Moulded Case Circuit Breaker


realease for O/L & S/C protection with ON / OFF

indicating lamps.

iii) 2 Nos. 250 Amp TP Moulded Case Circuit Breaker


realease for O/L & S/C protection with ON / OFF

indicating lamps.

iv) 1 No. 200 Amp TP Moulded Case Circuit Breaker

with neutral link with and MCCB complete with

microprocessor realease for O/L & S/C protection &

with CT's & digital type KWH meter & ON / OFF

indicating lamps.

v) 1 Nos. 200 Amp TP Moulded Case Circuit Breaker

with neutral link and MCCB complete with thermal

megnetic realease for O/L & S/C protection & ON /

OFF indicating lamps.

vi) 7 Nos. 160 Amp TP Moulded Case Circuit Breaker


realease for O/L & S/C protection & with ON / OFF

indicating lamps.

vii) 2 Nos. 160 Amp TP Moulded Case Circuit Breaker


microprocessor realease for O/L & S/C protection

and with CT's & digital typeKWH meter with ON /

OFF indicating lamps.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

viii) 2 Nos. 125 Amp TP Moulded Case Circuit Breaker



and with CT's & digital type KWH meter with ON /

OFF indicating lamps..

ix) 1 No. 125 Amp TP Moulded Case Circuit Breaker



and with ON / OFF indicating lamps.

x) 6 Nos. 100 Amp TP Moulded Case Circuit Breaker




xi) 7 Nos. 80 Amp TP Moulded Case Circuit Breaker




xii) 5 Nos. 63 Amp TP Moulded Case Circuit Breaker




INSTRUMENTS ON INCOMER BREAKERS

i) 9 Nos. 0 to 500 Volt digital voltmeter (96mm square)

(three for each incoming breaker).Transport Department NCT Of Delhi 7 - 145

BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

ii) 2 Nos. 0 to 1250 Amp digital ammeter (96mm square)

with CT's (for 750 KVA DG incoming breaker) and

selector switch

iii) 1 No. 0 to 600 Amp digital ammeter (96mm square)

with CT's (for 320 KVA DG incoming breaker) and

selector switch

iv) 3 Sets of phase indicating lights (RYB) with protection

mcb's (one set for each incoming breaker).

v) 3 Sets breaker 'ON' & 'OFF' indicating lamp (one set for


vi) 3 Sets trip circuit healthy indicating lamp (one set for


vii) 3 Sets auto trip indicating lamp (one set for each

incoming breaker).

viii) 3 Nos. trip circuit supervision relay (one for each

incoming breaker).

ix) 3 Nos. electronic type Digital energy analyser having 30

day memory and parameters of KW, KWH, power

factor, frequency etc. (one for each incoming breaker).

x) 3 Nos. master trip relay (one for each incoming

breaker).

1 Set

12.0 CAPACITOR BANK PANELTransport Department NCT Of Delhi 7 - 146

BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)


Capacitor Panel suitable for 415 volts (nominal) 3

phase 4 wire, 50 Hz, A.C. Supply totally enclosed type

with free standing floor mounted dust and vermin proof

indoor type fabricated from 2mm thick MS sheet

complete with busbars, ammeter, ammeter selector

switch, voltmeter, voltmeter selector switch, indicating

lamps, protection relays, CT's protection fuses,

interconnections with suitable size of copper leads/solid

aluminium strips/rod auto / manual selector switch for

operation of capacitor units, push buttons for manual

operation capacitor duty, contractors capacitor bank,

APFC relay, power factor meter etc. complete and

having following incoming and outgoing Circuit

Breakers etc. as per the drawing and specifications.

12.1 Capacitor Bank Panel (300 KVAR)

INCOMER

i) 1 Nos. 630A TP MDO MCCB with neutral link.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

ii) 1 No. 0-630A. Ammeter with selector switch

iii) 1 No. 0-500A. Voltmeter with selector switch

iv) 1 Set of phase indicating lamps

BUSBARS

800A TPN Aluminium busbars

OUTGOING

i) 14 stepped Automatic Power Factor Correction relay

(APFC relay).

ii) 4 Nos. 125Amp TP Moulded Case Circuit Breaker

iii) 2 Nos. 63Amp TP Moulded Case Circuit Breaker

iv) 2 Nos. 32Amp TP Moulded Case Circuit Breaker

v) 5 Nos. 20Amp TP Moulded Case Circuit Breaker

vi) 13 Nos. capacitor duty contactor (one for each 50

KVAR /25KVAR/12.5/ 5 KVAR Capacitor unit).

vii) 4 Nos. 50 KVAR Capacitor Bank.

viii) 2 Nos. 25 KVAR Capacitor Bank.

ix) 2 Nos. 12.5 KVAR Capacitor Bank.

x) 5 Nos. 5 KVAR Capacitor Bank.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

xi) 13 sets of push button stations Red and Green for

manual operation of capacitor units with auto/manual

selector switches.

xii) 1 No. Indicating lamp for each 50 KVAR/ 25 KVAR/

12.5/ 5 KVAR capacitor unit to indicate that the unit is

'ON'.

xiii) 1 No. Toggle switch for changing automatic to manual

operation of capacitor units.

xiv) 1 No. Power factor meter. 1 Sets

12.2 Capacitor Bank Panel (250 KVAR)

INCOMER

i) 1 Nos. 500A TP MCCB with neutral link.

ii) 1 No. 0-500A. Ammeter with selector switch

iii) 1 No. 0-500A. Voltmeter with selector switch

iv) 1 Set of phase indicating lamps

BUSBARS

600A TPN Aluminium busbars

OUTGOING

i) 14 stepped Automatic Power Factor Correction relay

(APFC relay).


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

ii) 3 Nos. 125Amp TP Moulded Case Circuit Breaker

iii) 3 Nos. 63Amp TP Moulded Case Circuit Breaker

iv) 5 Nos. 20Amp TP Moulded Case Circuit Breaker

v) 11 Nos. capacitor duty contactor (one for each50

KVAR / 25KVAR/12.5 KVAR Capacitor unit).

vi) 3 Nos. 50 KVAR Capacitor Bank.

vii) 3 Nos. 25 KVAR Capacitor Bank.

viii) 5 Nos. 5 KVAR Capacitor Bank.

ix) 11 sets of push button stations Red and Green for

manual operation of capacitor units with auto/manual

selector switches.

x) 1 No. Indicating lamp for each 50 KVAR/ 25 KVAR/

5 KVAR capacitor unit to indicate that the unit is

'ON'.

xi) 1 No. Toggle switch for changing automatic to

manual operation of capacitor units.

xii) 1 No. Power factor meter

2 Set


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

13.0 MCCB BOXES


MCCB in enclosure made out of 2 mm thick MS

sheet steel and suitable for 3 phase 4 wire 50Hz AC

system complete with four pole Moulded Case

Circuit Breaker suitable for incoming & outgoing

termination including powder coating etc. complete

as per specification & as required.

i) 200 Amp FP MCCB (35KA Ics Value)

1 No.

ii) 160 Amp FP MCCB (35KA Ics Value)

2 No.

iii) 125 Amp FP MCCB (35KA Ics Value)

2 No.

iv) 100 Amp FP MCCB (35KA Ics Value)

2 No.

v) 80 Amp FP MCCB (25KA Ics Value)

4 No.

vi) 63 Amp FP MCCB (25KA Ics Value)

2 No.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

14.0 L.T. CABLES

Supply of following sizes of 1.1KV grade multicore

aluminium conductor XLPE insulated and PVC

sheathed armoured cable conforming to IS : 7098

(Part-I) 1998.

i) 3.5 core, 400 Sq.mm.

510 M

ii) 3.5 core, 300 Sq.mm.

460 M

iii) 3.5 core, 240 Sq.mm.

1700 M

iv) 3.5 core, 185 Sq.mm.

170 M

v) 3.5 core, 120 Sq.mm.

160 M

vi) 3.5 core, 95 Sq.mm.

1530 M

vii) 3.5 core, 70 Sq.mm.

655 M

viii) 3.5 core, 50 Sq.mm.

520 M


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

ix) 3.5 core, 35 Sq.mm.

380 M

x) 4 core, 25 Sq.mm. 1355 M

xi) 4 core, 16 Sq.mm.

350 M

xii) 4 core, 10 Sq.mm.

300 M

xiii) 4 core, 6 Sq.mm.

250 M

xiv) 2 core, 16 Sq.mm.

500 M

xv) 2 core, 10 Sq.mm.

300 M

xvi) 2 core, 6 Sq.mm.

200 M

15.0 Supply of following sizes of 1.1KV copper conductor

PVC insulated & PVC sheathed armoured control

cable conforming to IS : 1554 (Part-I) 1988.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

i) 4 core, 2.5 Sq.mm.

100 M

ii) 8 core, 2.5 Sq.mm.

100 M

iii) 12 core, 2.5 Sq.mm.

100 M


sheathed / XLPE power cable of 1.1 KV grade of size

not exceeding 25 sq.mm direct in ground including

excavation, sand cushioning, protective covering and

refilling the trench etc. as required.

1000 M



exceeding 25 sq.mm. bu not exceeding 120 sq.mm

direct in ground including excavation, sand

cushioning, protective covering and refilling the

trench etc. as required. 1245 M



exceeding 120 sq.mm but not exceeding 400 sq.mm

direct in ground including excavation, sand




BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

19.0 Laying of one number additional PVC insulated and

PVC sheathed / XLPE power cable of 1.1 KV grade

of size not exceeding 25 sq.mm direct in ground in

the same trench in one tier horizontal formation

including excavation, sand cushioning, protective

covering and refilling the trench etc. as required.

500 M

20.0 Laying of one number additional PVC insulated and


of size exceeding 25 sq.mm but not exceeding 120

sq.mm direct in ground in the same trench in one tier

horizontal formation including excation, sand





exceeding 120 sq.mm but not exceeding 400 sq.mm

direct in ground in the same trench in one tier

horizontal formation including excavation, sand


trench etc. as required. including excavation, sand




sheathed / XLPE power cable of 1.1KV grade of size

not exceeding 25 sq.mm in the existing RCC / Hume /

Stoneware / Metal pipe as required.

80 M


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)


sheathed / XLPE power cable of 1.1 grade of size

exceeding 25 sq.mm but not exceeding 400 sq.mm in

the existing RCC / Hume / Stoneware / Metal pipe as

required. 150 M



of size not exceeding 25 sq.mm. in the existing

masonary open duct as required 75 M



exceeding 25 sq.mm but not exceeding 400 sq.mm in

the existing masonary open duct as required.

225 M



1.1 KV grade of size not exceeding 25 sq.mm. on

surface as required 1900 M



1.1 KV grade, of size exceeding 25 sq.mm but not

exceeding 120 sq.mm on surface as required.

1100 M



1.1 KV grade, of size exceeding 120 sq.mm but not

exceeding 400 sq.mm on surface as required.

1335 M


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

29.0 Supplying and making end termination with brass

compression gland and aluminium lugs for following

size of PVC insulated and PVC sheathed / XLPE

aluminium conductor cable of 1.1 KV grade as

required.

i)

3.5 core, 400 Sq.mm.

6 Set

ii)

3.5 core, 300 Sq.mm.

12 Set

iii)3.5 core, 240 Sq.mm.

20 Set

iv)3.5 core, 185 Sq.mm.

2 Set

v)3.5 core, 120 Sq.mm.

2 Set

vi)

3.5 core, 95 Sq.mm.

22 Set

vii)

3.5 core, 70 Sq.mm.

12 Set


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

viii)3.5 core, 50Sq.mm.

10 Set

viii)3.5 core, 35 Sq.mm.

6 Set

ix)

4 core, 25 Sq.mm.

20 Set

x)

4 core, 16 Sq.mm.

4 Set

xi)4 core, 10 Sq.mm.

6 Set

xii)4 core, 6 Sq.mm.

6 Set

xiii)2 core, 16 Sq.mm.

10 Set

xiv)2 core, 10 Sq.mm.

8 Set

xv)

2 core, 6 Sq.mm.

4 Set


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

xvi) 4.0 core, 2.5 Sq.mm. (copper)4 Set

xvii)8.0 core, 2.5 Sq.mm. (copper)

4 Set

xviii)

12.0 core, 2.5 Sq.mm. (copper)

4 Set

DG SETS & ACCESSORIES`̀


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

30.1 Supply, installation, testing and commissioning

of 750 KVA, 415+/-5%V, 3 phase, 1500 R.P.M,

0.8 PF water/ coolant cooled, rediator type floor

mounted Diesel Generator set with acoustic

enclosure conforming to latest environment

protection regulations for emmission and noise

levels complete with Diesel Engine developing

either 890 BHP at 1500 RPM or actual BHP

calculated considering de-rating factor if any

whichever is higher and all accessories including

supply and installation of Engine control panel

with meters, CTs and transducers for all metering

and protection, fuel pipe line upto 10 metre

Antivibration mountings, hospital type silencer,

electric starter, batteries & battery charger, fuel

tank of 990 ltrs. capacity with level indicator,

radiator, control wiring, first fill of lubricating

oil, and Diesel for testing and commissioning

and all spares and accessories as required

complete with necessary civil work such as

grouting, chipping, finishing etc.as required

complete but without foundation. The work

should be as per Central Electrical Inspectorate/

Pollution control board standards.

(Refer Particular specification) 2 Job


of AMF Panel suitable for 750 KVA, DG Sets

as required complete & standards. (Refer

Particular specification)2 Set


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)


of 320 KVA, 415+/-5%V, 3 phase, 1500 R.P.M,

0.8 PF water/ coolant cooled, rediator type floor

mounted Diesel Generator set with acoustic

enclosure conforming to latest environment

protection regulations for emmission and noise

levels complete with Diesel Engine developing

either 380 BHP at 1500 RPM or actual BHP

calculated considering de-rating factor if any

whichever is higher and all accessories including

supply and installation of Engine control panel

with meters, CTs and transducers for all metering

and protection, fuel pipe line upto 10 metre

Antivibration mountings, hospital type silencer,

electric starter, batteries & battery charger, fuel

tank of 990 ltrs. capacity with level indicator,

radiator, control wiring, first fill of lubricating

oil, and Diesel for testing and commissioning

and all spares and accessories as required

complete with necessary civil work such as

grouting, chipping, finishing etc.as required

complete but without foundation. The work

should be as per Central Electrical Inspectorate/

Pollution control board standards.

(Refer Particular specification) 1 Job


of AMF Panel suitable for 320 KVA, DG Sets

as required complete & standards. (Refer

Particular specification) 1 Set

EXHAUST PIPE


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

32.0 Supply and fixing of following sizes of MS ' B '

Class piping with bends etc. for Exhaust of DG Sets

including providing suitable self supporting

arrangement at suitable intervals, painting etc. and

supplying & fixing 150 mm thick Rock wool matrix

(3x50 mm. thick) insulation of density 150 Kg per

cubic metre on all sides of Exhaust pipe and silencer

with chicken mesh wrapping and 22 SWG aluminium

sheet cladding , suitable for outdoor installation

complete as required including guide support,

expansion joint, SS bellows as required and as per

specification.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

i) 150 mm dia (NB) 20 M

ii) 200 mm dia (NB) 60 M

iii) 250 mm dia (NB) 40 M

iv) 350 mm dia (NB) 120 M

33.0 EARTHING

33.1 Earthing with copper earth plate 600mm x 600 mm x

3 mm thick including accessories and providing

masonry enclosure with cover plate having locking

arrangement and watering pipe etc. (but without

charcoal or coke and salt) as required.

14 Set

33.2 Earthing with G.I. earth plate 600mm x 600mm x

6mm thick including accessories complete with

providing masonary enclosure with cover plate

having locking arrangement and watering pipe etc.

(but without charcoal or coke and salt) as required.

20 Set


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

33.3 Providing & laying of 65mm dia GI pipe in ground

from earth electrode as required. 200 M

33.4 Providing and fixing earth bus of 25 mm x 5 mm

copper strip on surface or in recess for connections

etc. as required. 300 M

33.5 Providing and fixing of following G.I. strip on

surface or in recess for connections etc. as required.

a)50mm x 5mm

600M

b) 25mm x 5mm1250

M

33.6 Extra for using salt and coke for G.I. or copper plate

earth electrode as required.34 M

SAFETY EQUIPMENT

34.0 Supply of following items for substation.

34.1 Rubber hand gloves suitable for 11KV.

1 Pair

34.2 Supply & fixing of shock treatment chart both in

Hindi & English for treating person suffering due to

electric shock mounted on wall hooks. 2 No.


BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

34.3 Providing and fixing H.T. danger notice plate of 250

mm x 200mm, made of mild steel at least 2mm thick

and vitreous enamelled white on both sides and with

inscription in single red colour on front side as

required. 4 No.

34.4 Providing and fixing M.V. danger notice plate of 200

mm x 150mm, made of mild steel at least 2mm thick

and vitreous enamelled white on both sides and with

inscription in single red colour on front side as

required. 4 No.

34.5 Providing of Carbon dioxide (CO2) type fire

extinguishers conforming to IS 2878-1976 and

cylinder fully charged of 4.5 Kg capacity. 4 No.

34.6 Supply and fixing of foam fire extinguishers, Portable

type 9 Litre capacity hanged on wall with bracket

component as required. 4 No.

34.7 Supply and fixing safety instruction chart in word

duly framed with 5mm thick glass required. (Approx

Front area 1.20 sq.mt.) 3 No.

34.8Providing of set of 4 Nos. 9.5 Litre capacity GI

bucket painted in post office red colour with prior

coat of red - oxide paint and written with white paint

'Fire' and mounted on MS angle iron frame with

bracket of appropriate size and capacity including

filling sand etc. 1 No.

34.9 First Aid box as approved by St. John Ambulance

Brigade / Indian red Cross conforming to IS 2217 -

1963 1 No.Transport Department NCT Of Delhi 7 - 165

BOQ For SS and DG


Rate in (RS.)

Amount ( Rs.)

34.10 Providing of rubber mat 1 mtr. (wide) and 12mm

thick to withstand 15KV dielectric strength as per IS

5424- 1969. 10 Mtr

TOTAL FOR ABOVE ITEMS OF

SUBSTATION WORKS WITH TRIVECTOR

METER, CT'S & PT'S


Bill OF QTY Civil works

TOTAL

In Words In Figure

I HVAC Works :

Total :

SH.

NO.SH. DESCRIPTION

BILL OF QUANTITIES FOR REDEVELOPMENT OF INTER STATE BUS TERMINAL AT KASHMERE GATE DELHI

HVAC Works

7 - 167

BOQ for HVAC

In Figures In Words

1. Water Chilling Unit

Providing, fixing, testing and commissioning

water cooled screw chilling unit complete with

semi hermetic/hermetically sealed screw

compressor multi circuit chiller, shell & tube

condenser, microprocessor based control

panel, refrigerant controls & piping, full

charged with non CFC refrigerant, mounting

base frame, foundations, foundation pads

shall be vibration free etc. complete as per

specifications and drawings.

Chilled water out : 7.2O

C

Chilled water in : 12.8O

C

Chiller F.F. : 0.0005

1.1

250 TR Nos. 4

2. Pump Set


of split casing type water circulating pump

sets complete with motor, base plate

foundation etc. as per specifications and

drawings. (Installation of pumps shall be

vibration free in operating conditions. All

necessary pre-cautions shall be taken such

as cushy foot mounting etc. for installation of

pumps).

Amount ( Rs.)

BOQ for HVAC Work or ISBT at Kashmere Gate, New Delhi.

PHASE - I

Sr. Description. UNIT QTYRate in (RS.)

Transport Department ,NCT Of DELHI 7 - 168

BOQ for HVAC

In Figures In Words Amount ( Rs.)Sr. Description. UNIT QTYRate in (RS.)

2.1 Primary Chilled water pump, split casing type

with end suction top discharge, 600 USGPM

at 20 mt. head (one standby). Nos. 4

2.2 Condenser water pump, split casing type with

end suction top discharge, 950 USGPM at 30

mt. head (one standby). Nos. 4

3. Secondary Chilled Water Pumps &

Variable Speed Pumping System


of secondary variable speed pumping system

consisting of 3 Nos. secondary pumps, 2

Nos. dedicated microprocessor based pump

controller with parallel pumping software duly

downloaded, 3 Nos. adjustable frequency

drives and multiple differential pressure

sensor/ transmitters as necessary and as

described in the specifications.

The entire system alongwith secondary

pumps must be sourced from single

manufacturer only for unit responsibility.

The system shall be complete in all respects

and suitable for following rating.

3.1 Split casing end suction and top discharge

secondary chilled water pumps 900 USGPM

at 18 mt. head. (one standby) Nos. 4

4. Cooling Tower


BOQ for HVAC



of FRP induced draft type cooling tower

complete with FRP basin, FRP body, fan,

distribution pipes, overflow pipe, ladder

including foundation etc. as per specifications

and drawings.

4.1

300 TR (one standby) Nos. 4

5. Airhandling Units


of double skin top/side discharge floor

mounted type airhandling units complete with

fan, fan motor with variable frequency drive

(VFD), cooling coil, canvass connection,

filters etc.as per specifications and drawings.

5.1 24,000 cfm, 4 RD coil

Nos. 14

5.2 12,000 cfm, 4 RD coil

No. 1

6. Unitary Airhandling Units


of double skin ceiling hung unitary type

airhandling unit complete with fan, fan motor

drive with variable frequency drive (VFD),

cooling coil, filters, canvass connections,

complete as per specifications and drawings.


BOQ for HVAC


6.1 5,000 cfm, 4 row coil cooling

Nos. 3

6.2 4,000 cfm, 4 row coil cooling

No. 1

6.3

3,000 cfm, 4 row coil cooling Nos. 5

6.4

1,200 cfm, 4 row coil cooling Nos. 7

6.5

1,000 cfm, 4 row coil cooling No. 1

7. PID Valves


of 2 way modulating cum pressure

independent balancing valve along with

actuator & proportionate thermostat complete

as per specifications and drawings.

7.1 144 USGPM

Nos. 14

7.2 72 USGPM

No. 1

7.3 30 USGPM

Nos. 3


BOQ for HVAC


7.4 24 USGPM

No. 1

7.5 18 USGPM

Nos. 5

7.6 7.2 USGPM

Nos. 7

7.7 6.0 USGPM

No. 1

8. Packaged Type Airwasher


of weather proof packaged type airwashers of

G.I. construction fabricated from 16 Ga G.I.

sheet body, blower housing, centrifugal

DIDW forward curved blower with motor, drive

set, acetate paper cooling pad of 90%

effeciency with stainless steel sump and

body, pump, water connection, Aluminum

filters, canvas connection, mounting base of

angle iron/chennel etc. blower & motor shall

be mounted on common rail using cushy foot

mounting and M.S. frame for supports etc. as

per specifications and drawings.

8.1 3,400 cfm, 40 mm static pressure

No. 1

8.2 2,000 cfm, 40 mm static pressure

No. 1


BOQ for HVAC


9. Condenser Water Piping

Mild steel condenser water piping system as

per specifications and drawings.

9.1 Providing, fixing, testing and commissioning

of `C' class mild steel - black steel pipes with

all necessary fittings i/c bends, tees, reducers,

flanges, supports etc. as per specifications

and drawings.

9.1.1

400 mm Rm 200

9.1.2

250 mm Rm 100

9.2 Butterfly Valves

9.2.1

250 mm Nos. 24

9.3 Balancing Valve

9.3.1

250 mm Nos. 3

9.4 Non Return Valves

9.4.1

250 mm Nos. 3

9.5Y - Strainer


BOQ for HVAC


9.5.1

250 mm Nos. 3

9.6

Water flow switch Nos. 3

9.7

Pressure gauge Nos. 14

9.8

Thermometer Nos. 6

9.9Flexible Pipe Connection

9.9.1

250 mm Nos. 14

9.10 Motorized butterfly valve with actuator, motor,

all controls & control wiring etc.

9.10.1

250 mm Nos. 6

10.Chilled Water Piping


of `C' class mild steel black steel pipes with

all necessary fittings, supports, insulation &

aluminium cladding etc. as per specifications

and drawings.


BOQ for HVAC


10.1 Piping

10.1.1

350 mm Rm 120

10.1.2

300 mm Rm 30

10.1.3250 mm Rm 350

10.1.4

200 mm Rm 330

10.1.5

150 mm Rm 110

10.1.6

125 mm Rm 220

10.1.7

100 mm Rm 80

10.1.8

80 mm Rm 310

10.1.9

65 mm Rm 60


BOQ for HVAC


10.1.10

50 mm Rm 55

10.1.11

40 mm Rm 155

10.1.12

32 mm Rm 30

10.1.13

25 mm Rm 180

10.2 Butterfly Valves

10.2.1

250 mm Nos. 8

10.2.2200 mm Nos. 16

10.2.3

80 mm Nos. 28

10.2.4

65 mm Nos. 2

10.3 Balancing Valves

10.3.1

200 mm Nos. 3

10.4 Non Return Valves

10.4.1

250 mm Nos. 3


BOQ for HVAC


10.4.2

200 mm Nos. 3

10.5 Y - Strainer

10.5.1

200 mm Nos. 3

10.5.2

80 mm Nos. 14

10.5.3

65 mm No. 1

10.6 Ball Valves

10.6.1

40 mm with strainer Nos. 9

10.6.2

40 mm without strainer Nos. 9

10.6.3

25 mm with strainer Nos. 15

10.6.4

25 mm without strainer Nos. 15

10.7Flexible Connection

10.7.1250 mm Nos. 6


BOQ for HVAC


10.7.2

200 mm Nos. 14

10.8

Water flow switch Nos. 3

10.9

Pressure gauge Nos. 54

10.10

Thermometers Nos. 40

10.11

Auto Airvent Nos. 4

10.12 Motorized butterfly valve with actuator, motor,

all controls & control wiring etc.

10.12.1

200 mm Nos. 6


BOQ for HVAC


10.13 Expansion Tank


of expansion tank PVC having 50 mm thick

glass wool insulation covered with 26 Ga

Aluminium sheet with main hole cover drain,

over flow, quick fill, normal water supply

connections complete in all respect as per


10.13.1 1000 litres capacity

No. 1

11. Axial Flow Fan


of tube axial flow type exhaust fan complete

with fan with motor, drive set, mounting

frame, mounting accessories canvass

connection, rating of fan shall be 150OC for

11/2

hours with `H' class insulation for motor,

gravity damper of G.I. at fan outlet complete

as per specifications and drawings. (Fan to

be suspended from ceiling/ installed on wall

required M.S. supports etc. and mounting

accessories should be taken).

11.1 40,000 cfm, 10 mmwg S.P.

Nos. 8

11.2 14,000 cfm, 40 mmwg S.P.

Nos. 2

11.3 4,600 cfm, 40 mmwg S.P.

Nos. 4


BOQ for HVAC


12. Propeller Type Fan


of propeller type fan for fresh air supply and

exhaust complete as per specifications and

drawings.

12.1 5,000 cfm, 610 mm dia

Nos. 3

12.2

4,000 cfm, 450 mm dia

Nos. 3

13. Exhaust Scrubber


of weather proof centrifugal exhaust

scrubber of 18 G GSS duly powder coated

inner & outer construction with DIDW forward

curved fan with motor and drive (both fan

and motor shall be mounted on a common

frame using cushy foot mounting) with side

suction and front discharge including

vibration isolator, water tank with float valve,

pump, distributor, nozzels, eleminator, piping

& valve from tank to pump to distributor and

M.S. frame for supports etc. as per


13.1 4,000 cfm, 50 mmwg S.P.

No. 1

13.2 2,400 cfm, 50 mmwg S.P.

No. 1


BOQ for HVAC


14. Inline Fans


of inline fans of G.I. construction complete

with centrifugal fan with motor, drive, canvass

connection at inlet outlet all enclosed in a 16

Ga G.I. sheet casing complete with MCB

panel with cabling and earthing and as per

specification and drawings.

14.1 1500 cfm, 20 mmwg S.P. Nos. 11

14.2 1200 cfm, 20 mmwg S.P. Nos. 3

14.3 1000 cfm, 15 mmwg S.P. Nos. 2

14.4 850 cfm, 15 mmwg S.P. No. 1

14.5 550 cfm, 15 mmwg S.P. No. 1

15. Drain Piping

Providing and fixing of G.I piping complete

with fittings, supports as per specifications

and duly insulated with 25 mm thick

expanded Polystyrene as per specification

and drawings.


BOQ for HVAC


15.1 50 mm dia Rm 100

15.2 40 mm dia Rm 80

15.3 32 mm dia Rm 120

15.4 25 mm dia Rm 100

16. Ducting

Providing and fixing of factory fabricated G.I.

ducting (as per SMACNA Codes) along with

complete with supports splitter dampers,

vanes etc. as per specifications & drawings.

16.1 G.I. Sheet Metal Ducting (Rectangular)

16.1.1 0.63 mm (24 Ga) Sqm 5807

16.1.2 0.80 mm (22 Ga) Sqm 800

16.1.3 1.00 mm (20 Ga) Sqm 1875

16.1.4 1.25 mm (18 Ga) Sqm 5685


BOQ for HVAC


17. Insulation

Providing and fixing polyethylene insulation

on ducts complete as per specifications and

drawings.

17.1 13 mm thick Sqm 8000

17.2 13 mm with 25 mm thick EPS of density 16

kg/m3. (For trench density). Sqm 205

18. Duct Acoustic Lining

Providing and fixing duct acoustic lining with

glass wool insulation boards, coverd with

perforated aluminium sheet, nuts, bolts etc.

18.1 25 mm Sqm 1000

19. Grilles/Diffusers


of supply and return air grilles/ diffusers as

per specifications and drawings including

fixing frame of G.I./wooden in false

ceiling/walls.

19.1 Aluminium supply/fresh/exhaust air grill with

damper.

Sqm 52.3

19.2 Aluminium return air grill without damper.

Sqm 129.1


BOQ for HVAC


19.3

Aluminium supply air diffuser with damper. Sqm 84.0

19.4 Aluminium return air diffuser without damper.

Sqm 84.0

20. Flexible Duct

Providing & fixing flexible duct to connect slot

diffiser oplenum to main duct as per

specification and draweings.

20.1 100 mm dia Rm 30

20.2 150 mm dia Rm 50

20.3 200 mm dia Rm 80

21. Fresh air Grilles

Provding & fixing Fresh air damper with

louvers, bird Screen and damper as per

specifications and drawings. Sqm 14.6

22. Acoustic Insulation for AHU Room


BOQ for HVAC


Providing and fixing acoustic insulation on

walls & ceiling using 32 kg/m3

glass wool

slabs of 50 mm thick, using G.I. chennels,

R.P. tissues and covered with 26 Ga

Aluminium perforated sheets complete as per

specifications & drawings.Sqm 1850

23. Volume Control Damper

Providing and fixing M.S. Volume control

damper in ducts complete as per

specifications and drawings. Sqm 14.26

24. Fire Damper

Providing and fixing galvanised sheet fire

dampers complete with damper electric

actuator, smoke/heat detector, interlocking

arrangement with blower motor complete as

per specification and drawings. (Opening of

fire damper in wall/ partition to be cut and later

made good to a fire rating of similar capacity

as the damper by HVAC contractor.)

24.1

Fire dampers Sqm 65.0

24.2

Actuator assembly Nos. 72

25. Electric Panel Board


BOQ for HVAC



of main panel board cubical compartmenta-

lised, floor mounted made of 2.0 mm thick

steel sheet duly painted complete with

voltmeter, ammeter, indicating lights for

selector switch, incoming/outgoing feeders

CTS contactors for complete as per

specifications and required.

1 No. 630 Amps TPN incoming ACB.

1 No. 630 Amps outgoing for 1 No. 250 TR

chiller. Set 3


of main panel board cubical compartmenta-

lised, floor mounted made of 2.0 mm thick

steel sheet duly painted complete with

voltmeter, ammeter, indicating lights for

selector switch, incoming/outgoing feeders

CTS contactors for complete as per

specifications and required.

1 No. 630 Amps TPN incoming MCCB.

1 set 630 Amps TPN Aluminium conductor

bus bar duly sleeved.

3 Nos. 63 Amps MCCB outgoing along with 3

Nos. DOL starter for 25 HP motor.

(Secondary CHW pump) and space for VFD.


BOQ for HVAC


4 Nos. 100 Amps MCCB outgoing along with

4 Nos. star delta starter for 50 HP condenser

water pump motor.

4 Nos. 63 Amps MCCB outgoing alon with 4

Nos. star delta starter for 20 HP pump.

(Primary CHW pump).


3 Nos. star delta starter for 15.0 kw cooling

tower fan. Set 1


of panel board cubical compartmentalised,

wall mounted made of 2.0 mm thick steel

sheet duly painted complete with voltmeter,

ammeter, indicating lights for selector switch,

incoming/outgoing feeders CTS contactors for

complete as per specifications and required.

1 No. 250 Amps TPN incoming MCCB.

1 set 250 Amps triple pole and neutral

Aluminium conductor bus bar duly sleeved.


4 Nos. star delta starter for smoke extraction

for waiting area fans.Set 2


BOQ for HVAC









1 No. 100 Amps TPN incoming MCB.



2 Nos. 32 Amps MCB outgoing along with 2

Nos.DOL starter for stair case pressurization

fan motor.


Nos. DOL starter for Liftwell pressurization fan

motor.Set 1








1 No. 32 Amps TPN incoming MCB.




BOQ for HVAC



Nos.DOL starter for scrubber/airwasher fan

motor and 2 outgoing of 8 Amps for pumps.Set 2








1 No. 63 Amps MCCB outgoing along with

1 No. DOL starter along with space for AHU

VFD motor. Set 14








1 No. 32 Amps MCB outgoing along with

1 No. DOL starter along with space for AHU

VFD motor. Set 1

25.8 1 No. 32 Amps MCB outgoing along with

1 No. DOL starter for UAHU motor and space

for VFD. Set 5


BOQ for HVAC


25.9 1 No. 16 Amps MCB outgoing along with

1 No. DOL starter for UAHU and space for

VFD. Set 4

26. Cable Tray

Providing & fixing of 16 Ga G.I. perforated

cable tray with proper clamping of cable over

it as per drawings.

26.1 450 x 100 mm Rm 200

26.2 300 x 50 mm Rm 500

26.3 150 x 40 mm Rm 530

26.4 100 x 40 mm Rm 350

27. Power Cabling

Providing and fixing PVC sheathed

Aluminium cables for various equipments

through walls/ceiling with appropriate clamps

& fixing arrangement as per specifications

and drawings.

27.1 31/2

C - 400 sqmm Rm 100


BOQ for HVAC


27.2 31/2

C - 35 sqmm Rm 600

27.3 3 C - 25 sqmm Rm 100

27.4 3 C - 16 sqmm Rm 60

27.5 3 C - 10 sqmm Rm 180

27.6 3 C - 6 sqmm Rm 300

27.7 3 C - 4 sqmm Rm 180

28. Earthing

Double earthing continuity conductors of

G.S.S between panel boards and equipments

as required. (May be checked at site)

28.1 25 mm x 6 mm (strip) Rm 100

28.2 8 SWG Rm 1400

28.3 10 SWG Rm 300

Total Rs.


S.No. Description Amount In Word In Figure

1.00 SANITARY FIXTURES

2.00 SOIL, WASTE, VENT & RAIN WATER PIPES

3.00 WATER SUPPLY

4.00 SEWERAGE & DRAINAGE

5.00 WATER TREATMENT AND PUMPS

6.00 DISMANTLING ITEM

7.00 SEWERAGE TREATMENT PLANT

Total :

WATER SUPPLY AND SANITARY INSTALLATION TO PROPOSED

INTER STATE BUS TERMINAL (PHASE-I) AT KASHMERE GATE, DELHI

SUMMARY

7 - 192

BOQ Sanitary and Plumbing Works

In Figures In Words

1.00 SUB HEAD 1 : SANITARY FIXTURES

1.01 Providing and fixing first quality white

vitreous china wall mounting crystal.

European type water closet similar to H.S.

Cat No. 20047 concealed duel operation

cistern with black solid plastic seat and lid,

with C.P. brass hinges and rubber buffers,

C.P. brass bolts, nuts, C.I. chair or

cantilever brackets for hanging

arrangement painted with two or three

coats of anticorrosive paint over a coat of

primer, W.C. adopter and washers

complete, including cutting and making

good the walls and floors wherever

required: 101 Each

1.02 Providing and fixing C.P. brass 15mm dia

spray jet with control, fixed under the seat

cover with flexible pipe.50 Each

1.03 Providing and fixing water closet squatting

pan ( Indian type W.C. pan ) with 100mm

sand cast Iron P or S trap, Concealed

flushing cistern with manually controlled

device flushing pipe with all fittings and

fixtures complete including cutting and

making good the walls and floors wherever

required.

a) White Vitreous china Orissa pattern W.C.

pan.of size 580x440mm with integral type

foot rests .43 each

BOQ Sanitary and Plumbing works

Amount ( Rs.)Sr. Description. Qty Unit

Rate in (RS.)

Transport Department ,NCT Of Delhi 7 - 193


In Figures In Words Amount ( Rs.)Sr. Description. Qty Unit

Rate in (RS.)


vitreous china under counter oval wash

basin size 560x450 mm, similar to H.S. Cat

No. 10049 specially fabricated C.I./M.S.

brackets painted with two or three coats of

enamel paint of approved shade over a

coat of primer, 32mm C.P. brass waste and

C.P. brass cast bottle trap and pipe to wall

with C.P. brass flange and rubber adopter

for waste connection complete including

cutting and making good the wall wherever

required.

a) White vitreous china under counter oval

wash basin with C.P.brass single hole

mixer. 10 Each


vitreous china flat back wash basin size

550x400 mm similar to H.S. Cat No. 10008

specially fabricated C.I./M.S. brackets

painted with two or three coats of enamel

paint of approved shade over a coat of

primer, 32mm C.P. brass waste and C.P.

brass cast bottle trap and pipe to wall with

C.P. brass flange and rubber adopter for

waste connection complete including

cutting and making good the wall wherever

required.

a) White vitreous china flat back wash basin

with C.P.brass pillar cock . 50 Each

1.06 Providing and fixing C.P. brass wall

mounted toilet paper holder, fixed to wall

with wooden cleats and C.P. brass screws

etc. including cutting and making good

the wall wherever required.

61 Each




Rate in (RS.)

1.07 Providing and fixing 15mm dia C.P. brass

angle valve with C.P. copper connecting

pipe 375m long with nuts and washers,

C.P. brass wall flange complete including

cutting and making good the wall

wherever required. 221 Each


vitreous china semistall urinal with battery

operated concealed autosensing flush valve

having solenoid valve and regulator,

C.I./M.S. brackets painted with two or

three coats of enamel paint of approved

shade over a coat of primer, G.I. heavy

quality concealed flush pipe with

clamps/hooks, C.P. brass spreader, 32 mm

dia C.P. brass waste, 32 mm dia C.P. brass

bottle trap and pipe upto wall with C.P.

brass flange complete in all respects,

including cutting and making good the

walls and floors wherever required.

100 Each

1.09 Providing and fixing white vitreous large

size 680x300 mm urinal division plate with

C.P. brass screws including cutting and

making good the wall wherever required.

77 Each




Rate in (RS.)

1.10 Providing and fixing stainless steel sink

single bowl with or without draining board

size 1145x510 and inside bowl size

500x400x200mm with C.I./ M.S. brackets



primer, 15 mm dia wall mounted sink mixer

with swinging spout, 40mm C.P. brass

waste C.P. brass chain and rubber plug,

40mm dia C.P. brass cast bottle trap with

C.P. brass pipe to wall and flange,

complete in all respects including cutting

and making good the walls and floors

wherever required. 30 Each

1.11 Providing and fixing C.P. brass cast twin

coat hooks fixed to wall/door with wooden

cleats and C.P. brass screws including

cutting and making good the wall

wherever required.55 Each

1.12 Providing and fixing C.P. brass long body

bib cock with wall flange including cutting

and making good the wall wherever

required.80 Each

1.13 Providing and fixing, testing and

commissioning of storage type water

heater (Geyser) etc. with automatic

thermostatic control electric element,

pressure release valve, M.S. nuts and bolts

etc. conforming to IS: 2082.

a) 25 litres capacity.

10 Each

b) 50 litres capacity.

8 Each

1.14 Providing and fixing C.P. brass adjustable

shower rose with 15 or 20mm inlet.25 Each




Rate in (RS.)

1.15 Providing and fixing 15 mm dia C.P.brass

concealed stop cock with flanges etc.

including cutting and making good the

wall wherever required.153 Each

1.16 Providing and fixing 600x20mm size similar

to C.P. brass towel rail with C.P. brackets

fixed to wooden cleats with C.P. brass

screws etc. including cutting and making

good the wall wherever required.

28 Each

1.17 Providing and fixing stainless steel liquid

soap dispenser fixed to wall with wooden

cleats and C.P. brass screws, including

cutting & making good the walls wherever

required. 30 Each

1.18 Providing and fixing C.P. brass self closing

bib cock with wall flange including cutting

and making good the wall wherever

required.237 Each

1.19 Providing and fixing fire clay lab. sink

single bowl size 600x450x200mm with

C.I./ M.S. brackets painted with two or

three coats of enamel paint of approved

shade over a coat of primer, 15 mm dia

wall/counter mounted sink pillar tap with

swinging spout, 40mm C.P. brass waste

C.P. brass chain and rubber plug, 40mm

dia C.P. brass cast bottle trap with C.P.

brass pipe to wall and flange, complete in

all respects including cutting holes in brick

masonary and R.C.C. and making good the

walls and floors wherever required. 11 Each




Rate in (RS.)

1.20 Providing and fixing Handicapped Grab bar

similar to TVS make model No. TVS-7632

including cutting and making good the wall

wherever required.12 Each

1.21 Providing and fixing double heater type

solid state fully hygienic no touch hand

drier rated for continuous repeat usage

with solid state time delay LSF protection,

with independent ambient light level &

seasonal control temperatures including

providing necessary Concealed brackets



primer, wiring cables from drier to plug,

plug tops etc. complete including cutting

holes in wall and making good the

walls wherever required. 15 Each

1.22 Providing and fixing 600x450mm beveled

edge mirror of superior glass (of approved

quality) complete with 6 mm thick hard

board ground fixed to wooden cleats

with C.P. brass screws and washers

complete. 78 Each

1.23 Providing and fixing storage type Water

Cooler of the following capacity I.S.I.

marked , stainless steel front panel , C.P.

brass push cock, inlet float valve with all

plumbing and electrical accessories, inlet,

outlet, overflow and PVC drain out

connection to F.D. completes required.

a) Cooling capacity 200 litres/hr

4 Each

Storage capacity 400itres




Rate in (RS.)

1.24 Providing and fixing Commercial type

Water Cooler of the following capacity

I.S.I. marked , stainless steel front panel ,

C.P. brass push cock, inlet float valve with

all plumbing and electrical accessories,

inlet, outlet, overflow and PVC drain out

connection to F.D. completes required.

a) Cooling capacity 400 litres/hr

4 Each

Storage capacity 800itres

1.25 Providing, installation and commisioning of

Ro system having a capacity of 5,000 litres

per hour based on treated water consisting

a) Duel Media Filter

MNO2, Anthracite, Activated Carbon,

Gravel & Sand Charged in Stainless Steel

Pressure Vessel (Food Grade 316-L) of

flowing with Frontal Pipe, Ball Valve &

Pressure Gauge.

b) Antiscalent Dosing

0-6 LPH. Dosing Pump with HDPE 200

Liters. Tank.

c) C-5 Micron Filter

20" 5 Micron Cartidge Filter.

d) High Pressure Pump

e) CIP SYSTEM

Stainless Steel Pump with HDPE tank.

f) R O Module

Required R.O. Membrane Module in

Structural Membrane Housing.




Rate in (RS.)

g) Electrical Panel

Panel fited with Auto-Cut Controls,

Conductivity Meter and Pressure Gauge

etc.

h) pH Correction System

Dosing Pump with HDPE tank.

i) RO Plant Skid

Fabricated Stainless Steel Skid Mounted

with RO Module, Electric Panel, High

Pressure Pump, CIP System & pH

Correction System.

j) Complete Installation and Assembly of

System PPR Piping and Fittings of IS

Standard2 Each

TOTAL OF SUB HEAD I CARRIED OVER TO SUMMARY : Rs.

2.00

2.01 Providing and fixing centrifugal cast iron,

soil, waste, rain water and vent pipes

conforming to IS:3989 including all fittings

(plain or access door) e.g. bends,

junctions, cowls, offsets, access pieces

etc., jointing with drip seal joints, fixed

with M.S. clamps fabricated from M.S. flat

galvanised 40mmx5mm flat placed on each

socket of pipe, painted with two or three

coats enamel paint of approved shade over

a coat of primer fixed in cement concrete

1:2:4 (1cement : 2 coarse sand : 4 graded

stone aggregate 20mm nominal size)

blocks 10x10x10cm size including cutting

holes in wall/floors and making good

wherever required.

SUB HEAD II : SOIL, WASTE, VENT AND RAIN WATER PIPES




Rate in (RS.)

a) 100 mm dia nominal bore

1100 metre

b) 75 mm dia nominal bore

150 metre

2.02 Providing and fixing G.I. (heavy class)

waste pipes and fittings conforming to IS:

1239 with M.S. clamp/hook including

cutting chases and holes in RCC/Brick

wall/Ceilings and making good the same in

cement mortar 1:3 ( 1 cement : 3 coarse

sand ) to match with the surroundings for

waste from wash basins, urinals kitchen

sink and sump, pump deliveries and

suction etc as shown in drawings and

directed by the Engineer in Charge.

a) 32 mm nominal bore

112 metre

b) 40 mm nominal bore

40 metre

c) 50 mm nominal bore

55 metre

d) 80 mm nominal bore

165 metre

e) 100 mm nominal bore

60 metre




Rate in (RS.)

2.03 Providing and fixing centrifugal cast (spun)

iron P or S deep seal type with self

cleaning design floor/urinal trap with or

without vent, 3 mm thick C.P. brass

grating, including setting with cement

concrete 1:2:4 (1cement : 2 coarse sand :

4 graded stone aggregate 20mm nominal

size) in sunked portion or supported with

M.S. structural clamps if suspended below

slab, cutting and making good the

floor/RCC and Brick wall wherever

required, complete in all respects.

a) 100mm inlet and 100mm outlet

232 Each

2.04 Providing and fixing 100 mm dia G.I.

extension piece forming a tee connection

of 32/40 mm dia for connections waste

from WB/sink including lead joint extension

piece with floor trap on one end complete

in all respects.30 Each

2.05 Providing and fixing cast brass clean out

plug with suitable insert keys for opening in

brass cap, male threaded joint with G.I.

socket caulked to pipe/fitting of C.I. or C.I.

(L.A.) pipe as required complete in all

respects.

a) 100 mm dia

94 Each

2.06 Painting G.I. pipes with two coats of

bitumastic paint, wrapping two layers of

polyethylene tape and applying final coat

of bitumastic paint for embedded pipes and

clamping with 16 Gauge SWG wire

complete in all respects.


122 metre




Rate in (RS.)


50 metre


60 metre


185 metre

e) 100 mm nominal bore60 metre

2.07 Painting sand cast iron/cast iron spun soil,

waste, rain water and vent pipes and

fittings with two or three coats of synthetic

enamel paint (approved quality) of colours

as per pipe colour code over a coat of

primer (of approved quality) for new work.

a) 100 mm dia

900 metre

b) 80 mm dia

150 metre

2.08 Providing and laying cement concrete 1:2:4

(1 cement :2 coarse sand: 4 graded stone

aggregate 20 mm, nominal size) 75mm

thick in bed and alround C.I. soil and waste

pipe under floor/vertical wall including

centering and shuttering wherever

required.

a) 100 mm dia

240 metre




Rate in (RS.)

2.09 Providing and laying uPVC pipe 6kg/cm2

class III (IS:4984-1983) including injection

moulded fittings where required e.g. tees,

bends, couplings and adapters and jointing

with adhesive approved by fittings

manufactures including necessary MS

clamps of 40mmx5mm thick flat, cutting

chases in walls and making good the same

with cement concrete 1:2:4 (1cement : 2

coarse sand : 4 graded stone aggregate

20mm nominal size) finished smooth.

a) 110 mm O.D.

1910 metre

b) 160 mm O.D.

744 metre

c) 200 mm O.D.

514 metre

2.10 Providing and fixing cast iron grating to the

inlet/ mouth of rain water pipe.a) 150 x 150 mm

642 Each

b) 200 x 200 mm36 Each

c) 250 x 250 mm

12 Each

2.11 Cutting holes upto 200 x 200 mm in R.C.C.

floors and walls for passing pipes etc. and

repairing the hole after insertion of pipe

etc. with cement concrete M25 including

finishing and making it leak proof including

centering and shuttering complete in all

respects.

a) Thickness upto 300mm

700 Each




Rate in (RS.)

2.12 Providing & fixing P.V.C. WC connector (

Straight or bend type) with rubber lip ring.

Including 110 mm dia PVC pipe/ bend of

required length and proper connection with

M seal to C.I. pipe complete as required.

101 Each

2.13 Providing & fixing rain water 'Khurras' size

450 x 450 mm required depth with lead

flashing around the pipe with one piece

lead sheet of 3 mm thick set on a layer of

cold bitumen including heavy duty CI/MS

grating as per drawing complete as

required. 690 Each

2.14 Constructing Grease Trap of size as

mentioned below of 1200 liquid depth in

brick work of class 75 with cement mortar

(1:6), inside plastering 16 mm thick with

cement mortar 1:3 with floating coat of

neat cement and rough plaster on outside

including aluminum bucket as per detail to

collect the grease. RCC top slab with 2 nos.

600 x 600 mm dia medium duty, double

seal manhole covers with frame (weight of

covers & weight of frame 75 kg.),

necessary 150 mm thick foundation

concrete(1:2:4)

a) 2500x1200 mm

2 Each

TOTAL OF SUB HEAD II CARRIED OVER TO SUMMARY

:-




Rate in (RS.)

3.00 SUB HEAD III: WATER SUPPLY

3.01 Providing and fixing heavy class GI pipes

conforming to IS: 1239 with specials,

fittings, union and clamps internal working

including cutting chases, holes in walls,

floors, R.C.C. slab/ beam and making good

the same complete in all respects.

a) 40mm dia nominal bore

20 metre

b) 50mm dia nominal bore20 metre

c) 65mm dia nominal bore

10 metre

d) 80mm dia nominal bore40 metre

e) 100mm dia nominal bore

20 metre

f) 150mm dia nominal bore

10 metre

3.02 Providing and fixing Chlorinated Polyvinyl

Chloride(CPVC) pipes, having terminal

stability for hot & cold water supply

including all CPVC plain & brass threaded

fitting including fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of

pipe & fitting with one step CPVC solvent

cement and testing of joints complete as

per direction of Engineer In charge.

Internal work -Exposed on wall

a) 25 mm nominal outer dia, Pipes.

320 metre

b) 32 mm nominal outer dia, Pipes.

330 metre

c) 40 mm nominal outer dia, Pipes.

340 metre




Rate in (RS.)

d) 50 mm nominal outer dia, Pipes.

630 metre

e) 90 mm nominal outer dia, Pipes.

410 metre





fitting i/c fixing the pipe with clamps at

1.00 m spacing. This includes jointing of

pipe & fitting with one step CPVC solvent

cement and the cost of cutting chases and

making good the same including testing of

joints complete as per direction of Engineer

In charge.

Concealed work including cutting chases

and making good the walls etc.


1350 metre


1350 metre


1400 metre


800 metre





fitting .This includes jointing of pipe &

fitting with one step CPVC solvent cement

trenching, refilling & testing of joints

complete as per direction of Engineer In

charge.

External Work


500 metre




Rate in (RS.)


150 metre


70 metre


30 metre

e) 90 mm nominal outer dia, Pipes.400 metre

f) 100 mm nominal outer dia, Pipes.

660 metre

3.05 Providing and fixing lever ball valve P.N. 40

hotforged sand blasted nickel plated body

and cap sealed with loctite chrome plated

brass valve carbon steel handle PVC coated



30 Each


60 Each


12 Each


10 Each


46 Each

e) 65 mm nominal bore

4 Each

f) 80 mm nominal bore

46 Each

3.06 Providing and fixing gunmetal non-return

valve of approved quality (screwed end)

a) 40 mm dia

4 Each

b) 50 mm dia

6 Each




Rate in (RS.)

c) 65 mm dia

2 Each

d) 80 mm dia

24 Each

3.07 Providing and fixing 500 mm dia cast iron

(medium duty) water tank cover with

frame, double Seal with lockable

arrangement complete in all respects.

(Total weight of cover & frame to be not

less than 116 kgs.) 28 Each

3.08 Providing and fixing 100 mm dia G.I. Vent

pipe 1 mtr high with brass mosquito proof

grating elbow with fittings.

a) 100 mm dia

20 Each

3.09 Providing & fixing Vidolex or equivalent

Thermal insulating tubing 6 mm thick over

pipes/ fitting etc. complete.

a) 15 mm dia nominal bore

80 metre

b) 20 mm dia nominal bore

80 metre

3.10 Providing and fixing M.S. pipe medium duty

sleeve 450mm long, threaded on both

sides and 6mm thick M.S. plate 100mm

wide welded alround the pipe as per detail


a) 300 mm dia

2 Each

b) 150 mm dia

8 Each

c) 100 mm dia

10 Each

d) 80 mm dia8 Each




Rate in (RS.)

e) 50 mm dia

10 Each

3.11 Providing and fixing high pressure ball cock

with copper float.

a) 50 mm dia

17 Each

3.12 Constructing masonry chamber 60 x 60 x

75 cm, inside with 75 class designation

brick work in cement mortar 1:5 (1 cement

: 5 fine sand) for valve, with CI surface box

100 mm, top diameter, 160mm bottom

diameter and 180mm deep (inside) with

chained lid and RCC top slab 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) necessary

excavation foundation concrete 1:5:10 (1

cement : 5 fine sand : 10 graded stone

aggregate 40 mm nominal size) and inside

plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12 mm thick

finished with a floating coat of neat cement

complete as per standard design.50 Each

3.13 Providing and fixing HDPE 3 layered

insulated water storage tank including

holes for inlet, outlet, overflow, drain &

vent pipes, manhole cover, etc. complete

on terrace. 275000 Litres

3.14 Providing & fixing C.I. 'Y' Strainer (screwed

/ flanged) with stainless steel fine wire

mesh perforated sheet basket with

necessary flange / union nuts, bolts and

washers complete as required.

a) 80 mm dia

2 Each

b) 100 mm dia

4 Each




Rate in (RS.)

c) 150 mm dia

1 Each

3.15 Providing & fixing C.I. wafer type check

valve tested to a pressure not less than 15

kg/ sqcm, including rubber gasket, flanges,

union , nuts, bolts, washers & painting


a) 80 mm dia

16 Each

b) 100 mm dia

2 Each

c) 150 mm dia

2 Each

3.16 Providing & fixing butterfly valve (Body :

Grey Cast Iron, Shaft: SS, Disc: SG iron

(Rilson coated ), Liner: HT-EPDM) (up to

150 mm dia with hand lever operation &

above with gear box operation) Tested to a

pressure not less than 15 kg/sq.cm.

Including rubber gasket, flanges, nuts,

bolts washers & painting complete as

required.

a) 80 mm dia

20 Each

b) 100 mm dia

8 Each

c) 150 mm dia

2 Each

3.17 Providing and fixing in position of approved

quality high pressure valve Gun Metal Float

Valve with copper ball float and brass rods

of required length suitable for test pressure

of not less than 15kg/ sqcm of the

following sizes:




Rate in (RS.)

a) 50 mm dia

14 Each

3.18 Providing and laying S&S centrifugally cast

(spun) iron pipes (Class LA) conforming to

IS - 1536 with special fitting, lead joint,

refilling, earth work excavation, cutting of

road, jointing with existing Delhi Jal Board

line for extension upto new pump room.

a) 200 mm dia

250 metre

4.00

4.01 Earth work in excavation in foundation

trenches or drains (not exceeding 1.5 m in

width or 10 sqm on plan) including

dressing of sides and ramming of bottoms,

lift upto 1.5 m, including getting out the

excavated soil and disposal of surplus

excavated soil as directed, with all leads.

All kind of soils for manholes

770 Cum

TOTAL OF SUB HEAD III CARRIED OVER TO

SUMMARY :-

SUB HEAD IV : SEWERAGE & DRAINAGE




Rate in (RS.)

4.02 Excavating trenches of required width for

pipes, cables etc including excavation for

sockets, and dressing of sides, ramming of

bottoms, depth upto 1.5 m including

getting out the excavated soil, and then

returning the soil as required, in layers not

exceeding 20 cm in depth including

consolidating each deposited layer by

ramming, wateriing, etc. and disposing of

surplus excavated soil as directed, with all

leads.

All kinds of soil

a) Pipes, cables etc, exceeding 80 mm dia.

but not exceeding 300 mm dia.

1485 metre

b) Pipes, cables etc, exceeding 300 mm dia.

but not exceeding 600 mm dia.720 metre

4.03 Extra for excavating trenches for pipes,

cables etc in all kinds of soils for depth

exceeding 1.5 m but not exceeding 3 m.


but not exceeding 300 mm dia. 700 metre


but not exceeding 600 mm dia. 300 metre

4.04 Filling available excavated earth (excluding

rock) in trenches, plinths, sides of

foundations etc. in layers not exceeding 20

cm in depth including consolidating each

deposited layer by ramming, wateriing,

lead up to 50 m and lift upto 1.5m.

385 Cum

4.05 Extra for every additional lift of 1.5m or

part thereof in

All kinds of soil

385 Cum




Rate in (RS.)

4.06 Cutting road and making good the same

including supply of extra quantities of

materials i.e. aggregate, moorum

screening, red bajri and labour required.

a) Bituminous portion /other hard surface

2200 sqm

4.07 Providing, laying, jointing and testing in

position the following C.I. pipes class(LA)

conforming to IS 1536 for drainage cut to

required lengths making proper

connections with requireds depth. Pipe to

be laid below ground level in trenches upto

required depth the surplus excavated

maerial and making good the

samecomplete as required.

a) 150 mm dia

150 metre

b) 200 mm dia

320 metre

c) 250 mm dia

205 metre

d) 300 mm dia

560 metre

e) 450 mm dia

600 metre




Rate in (RS.)

4.08 Providing and laying cement concrete 1:4:8

(1 cement : 4 coarse sand :8 graded stone

aggregate 40 mm nominal size) all-round

C.I. pipes including bed concrete, centering

and shuttering as per standard design:

a) 150 mm dia

150 metre

b) 200 mm dia

320 metre

c) 250 mm dia

205 metre

d) 300 mm dia

560 metre

e) 450 mm dia

600 metre

4.09 Providing and fixing square-mouth H.C.I.

gully trap complete with C.I. grating, brick

masonry chamber with bricks of class

designation 75 in cement mortar 1:5 (1

cement : 5 coarse sand) inside plaster

above trap 12mm thick in cement mortar

1:3 ( 1 cement : 3 coarse sand) finished

with a floating coat of neat cement outside

plaster 12mm thick in cement mortar 1 :3

( 1 cement : 3 coarse sand) 10 cm thick

foundation concrete 1:5:10 mix ( 1 cement

: 5 coarse sand : 10 graded stone

aggregate 40mm nominal size) space

between chamber and trap filled with

cement concrete 1:2:4 ( 1 cement : 2

coarse sand : 4 graded stone aggregate 20

mm nominal size) and water tight C.I.

cover with frame of 300x300 mm size

(inside) the weight of cover to be not less

than 4.50 kg and frame to be not less than

2.70 kg including excavation, refilling and

disposal of surplus earth as directed by

Engineer in Charge compete as per

standard design.




Rate in (RS.)

a) 100x100mm size P type

16 Each

4.10 Constructing road gully chamber of the

following sizes in brick work with the bricks

of class designation 75 in cement mortar

1:5 (1 cement: 5 coarse sand), necessary

foundation concrete 1:4:8. Inside & outside

plastering 12 mm thick with cement mortar

1:3 with a floating a coat of neat cement.

Including necessary excavation, refilling

watering, ramming, removing, the surplus

excavated material and making good the

same complete as required. Cost shall be

inclusive off providing, PCC /SRFC heavy

duty grating with frame.

a) Internal size 450 x 500 x 450- 600 mm

deep: PCC/SFRC Grating with frame 450 x

450 mm 10 Each

b) Internal size 600 x 600 x 600- 750 mm

deep: PCC/SFRC Grating with frame 600 x

300 mm 10 Each

4.11 Constructing brick masonry circular type

manhole 0.91m internal dia at bottom and

0.56m dia at top in cement mortar 1:4 (1

cement :4 coarse sand), in side cement

plaster 12 mm thick with cement moratr

1:3 (1 cement : 3 coarse sand) finished

with a floating coat of neat cement,

foundation concrete 1:3:6 mix ( 1 cement :

3 coarse sand : 6 graded stone aggregate

40mm nominal size), and making

necessary channel in cment concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) finished

with a floating coat of neat cement all

complete as per standard design




Rate in (RS.)

a) 0.91 m deep with S.F.R.C. cover and frame

(heavy duty, HD-20 grade designation)

560mm internal diameter conforming to

I.S. 12592, total weight of cover and frame

to be not less than 182kg., fixed in cement

concrete 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregate 20mm nominal

size) including centering shuttering all

complete. (Excavation, foot rests and

12mm thick cement plaster at the external

surface shall be paid for separately )

With F.P.S. bricks class designation 75

20 Each

4.12 Constructing brick masonry circular

manhole 1.22 m internal dia at bottom and

0.56m dia at top in cement mortar 1:4 (1

cement : 4 coarse sand), inside cement

plaster 12mm thick with cement mortar 1:3

(1 cement: 3 coarse sand) finished with a

floating coat of neat cement, foundation

concrete 1:3:6 (1 cement : 3 coarse sand :

6 graded stone aggregate 40 mm nominal

size) and making necessary channel in

cement concrete 1:2:4 (1 cement : 2


20mm nominal size) finished with a

floating coat of neat cement, all complete

as per standard design.




Rate in (RS.)

a) 1.68m deep with S.F.R.C. cover and frame

(heavy duty HD-20 grade designation)



to be not less than 182 kg., fixed in


coarse sand : 4 gradestone aggregate

20mm nominal size) including centerning

shuttering all complete.( Excavation, foot

rests and 12 mm thick cement plaster at

the external surface shall be paid for

separately)

With F.P.S. bricks class designation 75.

6 Each

4.13 Constructing brick masonry circular

manhole 1.52 m internal dia at bottom and

0.56 m dia at top in cement mortar 1:4 (1

cement : 4 coarse sand) inside cement

plaster 12mm thick with cement mortar 1:3

(1 cement : 3 coarse sand) finished with a

floating coat of neat cement, foundation



size) and making necessary channel in



20mm nominal size) finished with a floating

coat of neat cement all complete as per

standard design




Rate in (RS.)

a) 2.30m deep with SFRC Cover and frame

(heavy duty HD- 20 grade designation)



to be not less than 182 kg. fixed in cement



size) including centering shuttering all

complete. (Excavation, foot rests and 12

mm thick cement plaster at the external

surface shall be paid for separately)


6 Each

4.14 Extra depth for circuler type manhole

0.91m internal dia (at bottom) with beyond

0.91m to 1.67m

With F.P.S. bricks class designation 7512 Mtr

4.15 Extra depth for circuler type manhole

1.22m internal dia ( at bottom) beyond

1.68 m to 2.29 m

With F.P.S. bricks class designation 753 Mtr

4.16 Extra depth for circuler type manhole 1.52

m internal dia (at bottom) beyond 2.30m.


Mtr




Rate in (RS.)

4.17 Constructing brick masonry manhole with

in cement mortar 1:4 (1 cement: 4 coarse

sand), R.C.C. top slab in 1:2:4 mix (1


aggregate 20mm nominal size) foundation

concrete 1:4;8 (1 cement : 4 coarse sand :


size), inside plastering 12mm thick with

cement mortar 1:3 (1 cement : 3 coarse

sand) finished with a floating coat of neat

cement and making channels in cement

concrete 1:2:4 (1 cement : 2 coarse sand:


size) finished with a floating coat of neat

cement complete as per standard design.

a) Inside size 120 x 90 cm and 90 cm deep

including S.F.R.C. perforated cover and

frame (heavy duty HD-20 grade

designation) 560mm internal diametre

conforming to I.S. 12592, total weight of

cover and frame to be not less than 182

kg., fixed in cement concrete 1:2:4 (1


aggregate 20mm nominal size) with F.P.S.

bricks.


72 Each

4.18 Extra for depth for manholes

Size 120 x 90 cm

With F.P.S. bricks class designation 75 34 Mtr




Rate in (RS.)

4.19 Providing and fixing orange colour safety

foot rest of minimum 6 mm thick plastic

encapsulated as per IS: 10910 on 12 mm

dia steel bar conforming to IS : 1786

having minimum cross section as 23 mm x

25 mm and over all minimum length 263

mm and width as 165 mm with minimum

112 mm space between protruded legs

having 2 mm tread on top surface by

ribbing or chequering besides necessary

and adequate anchoring projections on tail

length on 138 mm as per standard

drawing and suitable to with stand the

bend test and chemical resistance test as

per specification and having manufacturer's

permanent identification mark to be visible

even after fixing, including fixing in

manholes with cement concrete block 1:3:6

( 1 cement : 3 coarse sand : 6 graded

stone aggregate 20mm nominal size)

blocks of size 30x20x15 cm complete as

per design. 672 Each

4.20 Construction of ground water re-charge pit

5 m dia or 6x2.5 mtr internal size 4.5m

nominal depth with following specifications

and including supplying, installation &

execution of all jobs, complete as per

drawings and directions of Engineer-in-

Charge.

a) Peripheral brick masonry in cement mortar

1:4 ( 1cement: 4 coarse sand) with

necessary 15 mm thick cement plaster 1 :3

neat finish.




Rate in (RS.)

b) Foundation concrete 1:5:10 (1 cement : 5


40 mm nominal size) (200mm thick)

c) 900mm thick dry stone aggregate bed ( 3

to 20 mm nominal grade) 400 mm thick

Jamna sand.

d) 200mm thick R.C.C. slab in M20 mix to

cover the well at top including necessary

centring, shuttering and reinforcement with

required openings /cutouts etc. supplying

and fixing 560 mm dia C.I. Manhole cover

and frame (total weight 216 kg) heavy

duty, all complete as per drawings.

e) 160mm long PVC perforated solid pipe laid

vertically upto sub-soil water level or 24m

whichever is lower including necessary

drilling/ boring in ground in all kinds of soil

as directed by the Engineer-in-charge.

f) Supplying and fixing PVC coated M.S. foot

rests.

g) Making all inlets & outlets in brick masonry

walls including cutting holes& making good

the same.

h) 10- 12 mm thick cement plaster 1 :3 ( 1

cement : 3 fine sand ) mixed with water

proofing compound on top of R.C.C slab,

finished smooth.

i) 2 Nos. SRFC heavy duty conforming to IS

12592 manhole cover in top slab.




Rate in (RS.)

Rate to include excavation back filling,

disposal of surplus excavated soil with all

leads and all other materials & operations

necessary for completing the job.

4 Each

4.21 Making connection of sewer/ storm water

line dia including necessary excavation &

breaking the wall of manhole and making

good the same with cement mortar 1: 3

finished with a floating coat of neat cement

and making drains etc. complete.

Removing the excavated surplus material.

a) 250 mm dia

2 Each

b) 450 mm dia

4 Each

TOTAL OF SUB HEAD IV CARRIED OVER TO SUMMARY :-




Rate in (RS.)

5.00

5.01 Supplying, installation & commissioning of

softener comprising of FRP pressure vessel

of suitable for working pressure of 5

kg/sq.cm. The softner should be proided

with collection system, base plate fitted

with PP nozzles, distribution system,

hydraulic injection method, ion exchange

resin, regenerant NACL lined , valves

piping etc.FRP regenerant tank of suitable

capacity complete in all respects for

complete operation and working of softner.

Softener capacity 15,000 litres per hour

FRP regeneration tank of approved size

with all accessories etc. complete

a) Hardness upto 500 PPM1 Each

5.02 Providing, fixing & installation of FRP

Pressure Filter 15,000 LPH capacity,

suitable for working pressure of 3 kg/

sqcm, with flow rate 20,000

LPH/sq.m.including supplying and fixing of

necessary pressure vessel of suitable size

having distribution system, collection

system, PP nozzles with control valves,

back wash arrangement, filtering media

comprising of iron removing media 400 mm

high , 100 mm gravel/ 400 mm fine sand,

air blower etc. complete in all respects.

2 Each

SUB HEAD V : WATER TREATMENT AND PUMPS.




Rate in (RS.)

5.03 Providing & fixing Chlorination system

consisting of electronic metering type

dozing pump, 80W motor of working

pressure 3 kg/sqcm ASIA-LMI or equivalent

make complete with/and polythene inter-

connecting pipe of 15mm dia, PVC valves,

PVC/HDPE dosing tank of 100 Litres

capacity. 1 Each

5.04 Supply, installation, testing and commi-

ssioning of monoblock pumps with bronze

impeller having suitable electric motor

working at 415 V 50 cycles/second, three

phase A.C. power supply, necessary civil

foundation in cement concrete 1:2:4 (

200mm high) aelessary suitable wiring

from pannel to motor etc. M.S. base plate


a) 2 No. monoblock centrifugal pumps with

7.5 H.P. motor having a capacity of 40,000

LPH at 33 m head for Soft Water and

Drinking Water transfer to Terrace (1 No.

for each and 1 No. Stand-By for both

Systems) with accessories, safeties

complete in all respects.3 Set

b) 2 No. monoblock centrifugal pumps with

12.5 H.P. motor having a capacity of

40,000 LPH at 52 m head for Soft Water

and Drinking Water transfer to Terrace (1

No. for each and 1 No. Stand-By for both

Systems) with accessories, safeties

complete in all respects.2 Set

c) 3 No. monoblock centrifugal pumps with 3

H.P. motor having a capacity of 4.2 LPS at

24m head ( for water treatment)1 Set




Rate in (RS.)

5.05 Supplying, installation, testing and

commissioning of automatic submersible

drainage pump set with level controller and

dry running protection giving a discharge

as specified below, working at 440V, three

phase, 50 cycles A.C. supply suitable

motor including 10m cable as per

manufactures specification including the

supply and fixing electrical panel board, 3

phase indicating lamps, incoming and out

going switches suitable size wiring,

earthing etc. as per electricity rules, the

pump shall have provision for sequence

operation and to operate both the pumps

together, complete in all respects with solid

handling of 12mm.

a) 2 Nos. submersible automatic pump giving

a discharge of 300 LPM at 15 m head

with wall mounted electrical panel board

suitable for two pumps with provision for

alternative operation of pumps complete

with solid handling of 12mm.(Water Pump

Room & Sewage Plant Room )

1 Set

b) 3 Nos. submersible automatic pump giving

a discharge of 1000 LPM at 8 m head

with wall mounted electrical panel board

suitable for two pumps with provision for

alternative operation of pumps complete

with solid handling of 12mm. (For

Harvesting Well )4 Set




Rate in (RS.)

5.06 Supplying, installation, testing and

commissioning of totally enclosed free

standing floor mounted dust and vermin

proof indoor cubical type common electrical

panel board made of 14 gauge M.S. CRCA

sheet suitable for three phase, 4 wire, 50

Hz A.C. supply complete with incoming and

outgoing MCCB/ SFU's, contactors, timers,

metering instruments, Al. bus bars, inter

connections potential free contacts etc. as

required. Panel board shall be powder

coated in grey colour.

INCOMING

I) 1 No. - 200 A TP MCCB with rotary

operating handle

ii) 1 No. - Voltmeter 0-500V with selector

switch

iii) 1 No. - Ammeter 0-150A with selector

switch and CT's

iv) 1 set - R-Y-B indication lamp with fuses

OUTGOING

I) 3 Nos. - 32 A TPN SFU with 20A HRC fuses

(incoming)

ii) 3 Nos. - DOL starter suitable for 3/5 H.P., 3

phase pump motor complete with MN type

over load relay, single phasing preventor

MRPD 2, ammeter, ON-OFF indication

lamp, Auto and manual switch.

iii) 4 Nos. - 63 A TPN SFU with HRC fuses

(incoming)




Rate in (RS.)

iv) 4 Nos. - Star delta starter suitable for 20

H.P., 3 phase pump motor complete with

MN type over load relay, single phasing

preventor MRPD 2, Ammeter, ON-OFF

indication lamp, Auto and manual switch.

v) Spare

a) 32 amp TPN MCCB 2 Nos.

b) 63 amp TPN MCCB 2 Nos.

vi) 4 Nos. 32A 4 pole MCB

vii) 4 Nos. 63A DP MCB

2 Each

5.07 Providing and fixing electro-magnetic type

level indicator for water tanks electro-

magnetic type mounting in panel with the

following features. Level display alarm

when water level is low or high full range

from one level to four level display and

manual reset for alarm etc. with electrical

wiring conduit supports from wall & ceiling

probs and all other accessories complete as

required. 6 Nos

5.08 Providing & fixing C.I. 'Y' straniner (

screwed / flanged) with stainless steel fine

wire mesh perforated sheet basket with

necessary flange /unions nuts, bolts and

washers complete as required.

a) 80 mm dia

3 Nos

b) 100 mm dia

4 Nos

c) 150 mm dia

4 Nos

TOTAL OF SUB HEAD V CARRIED OVER TO SUMMARY




Rate in (RS.)

6.00 DISMANTLING ITEM

6.01 Dismantling and carrying away of existing

soil & waste pipe including stacking of

services able material and disposable of

unserviceable material.

a) Upto 100 mm dia C.I. pipe

700 meter

b) 150 to 200 mm dia C.I. pipe

100 meter

6.02 Dismantling of sanitary Fixture & disposal

like E.W.C., W.B., O.W.C., Urinal etc.180 each

6.03 Dismantling of G.I. water pipe

a) 1/2" to 50 mm dia

800 meter

b) 50 to 100 mm dia

400 meter

6.04 Dismantling C.I. pipes including excavation

and refilling trenches after taking out the

pipes, manually/ by mechanical means

breaking lead caulked joints, melting of

lead and making into blocks including

stacking of pipes, lead at site within 50

metre lead as per direction of Engineer-in-

charge:

a) Above 150 mm dia up to 300 mm dia

1000 meter

b) Above 300 mm diameter

600 meter




Rate in (RS.)

6.05 Taking out C.I. cover with frame from

R.C.C. top slab of manholes of various

sizes including demolishing of R.C.C. work

manually/ by mechanical means and

stacking of useful materials near the

site and disposal of unserviceable

materials into municipal dumps within 50

metres lead as per direction of Engineer-in-

charge: 80 Each

6.06 Dismantling of road gully chamber of

various sizes including C.I. grating with

frame including stacking of useful materials

near the site and disposal of unserviceable

materials into municipal dumps within 50

metres lead including refilling the

excavated gap. 20 Each

7.00

7.01 Supplying, fixing, installation, testing and

commissioning of Sewerage Treatment

Plant completely underground including

civil, electrical & mechanical works

equipments, with 2 nos. treated effluent

tank of 5 Lacs & 1 Lacs litres capacity each

and getting it approved from local pollution

board, complete in all respects.

Raw sewage generation &

characteristics for designing of the

plant

Average daily flow (cum/day) : 1000 cum

PH : 7 - 7.5

Suspended solids (mg/l) : 450- 600

BOD : 250 mg/l

TOTAL OF SUB HEAD VI CARRIED OVER TO

SUMMARY :-

SUB HEAD VII : UNDER GROUND SEWERAGE TREATMENT PLANT INCLUDING CIVIL & MECHANICAL

ELECTRICAL WORK ON TURNKEY BASIS




Rate in (RS.)

COD : 450 mg/l

TSS : 2- 5.0 mg/l

Oil & grease (mg/l) : 10

Detergents (mg/l) : 10

Detergents (mg/l) : 10

E- Coli : 105 – 10

7 MPN

Total sewage /day : 10,00,000 lts./day

Invert level of sewer : -3 mtr deep

(adjusted in ground level)

The sewerage treatment should be

Extended Aeration System, SAFF

(Submerged Aeration Fixed Film) and FAB

(Fluidized Aerobic Bio-reactor) or

equivalent system with centrifuge 2 nos.

sump drainage pump & 4 nos. water pump

(2 no. pump of 40,000 LPH at 33 mtr head

& 2 no. pump of 40,000 LPH at 52 mtr

head) completely underground and treated

effluent will be used for horticultural

purposes.

The sewerage treatment plant shall

have following characteristics:

a) Efficient

b) Low power consumption

c) Minimum maintenance

d) Minimum space requirement

e) Self operating system

The treated effluent shall have

following standard:BOD : Less than 20 mg/l

COD : Less than 100 mg/l

Suspended solids : Less than 30 mg/l

Oil & grease : Less than 10 mg/l

PH : 7 – 8




Rate in (RS.)

The contractor will get the design/proposal

of sewerage treatment plant approved

from the Engineer-in-charge/ Consultant

and State Pollution Board before execution

of work. The contractor will also get

completion and no objection certificate

from the State/ Central Pollution Board

regarding its performance. The treated

effluent will be used for horticulture A.C. &

Flushing and press sludge as manure. The

firm will provide underground treated

effluent storage tank 2 nos., 1 no. of 5

Lacs litres & 1 no. of 1 Lacs litres along

with distribution of 4 Nos. pump , 2 no.

pump of 40,000 LPH at 33 mtr head & 2

no. pump of 40,000 LPH at 52 mtr head

along with panel having timer switch for

alternate operation of pump, etc. complete

in all respects.1 JOB

Note:- The Cost should include lighting and

ventilation of the plant room, all civil,

electrical control panel, wiring, mechanical

equipment piping work compete in all

respect.

TOTAL OF SUB HEAD VII CARRIED OVER TO

SUMMARY :-


S.No Description Amount in Rs.

1SUBHEAD - 1 : FIRE FIGHTING SYSTEMS,

PUMPS & ACCESSORIES Rs.

2 SUBHEAD - 2 : HYDRANT & WET RISERS. Rs.

3SUBHEAD -3 : SPRINKLER SYSTEM. Rs.

4SUBHEAD - 4 : EXTINGUISHERS Rs.

TOTAL Rs.

FIRE FIGHTING SYSTEM TO PROPOSED INTER STATE BUS TERMINAL(PHASE-I)

AT KASHMERE GATE, DELHI.

SUMMARY for Fire fighting Work

7 - 233

Boq For Fire Fighting Work

In Figures In Words

1.00

1.01 Dismantling, re-installation, testing and commissioning

of electric driven Fire Pump suitable for automatic

operation consisting of the following complete in all

respect as required and as specified from existing pump

room to new location of pump room with all accessories.

a) Horizontal type,multistage,centrifugal,split casing pump

of cast iron body & bronze impeller with stainless steel

shaft, mechanical seal to ensure a minimum pressure

of 3.5kg./sq.cm. at highest and farthest outlet at

specified flow of 2850 lpm at 80m.head confirming to

IS:1520

b) Suitable HP SQ cage induction motor TEFC,

Synchronous speed 1500 RPM, suitable for IP 21 class

of protection for enclosure,horiziontal foot mounted type

with class -`F` insulation, conforming to IS-325.

c) M.S. fabricated Common base plate, coupling, coupling

guard, foundation bolts etc.as required.

d) Suitable cement concrete foundation duly plastered,

including anti vibration pads, complete. 2 Set


of Diesel Engine driven Fire Pump suitable for

automatic operation consisting of the following complete

in all respect as required and as specified from existing

pump room to new location of pump room with all

accessories.

Amount ( Rs.)Sr. Description. Qty Unit

Rate in (RS.)

Transport Department , NCT Of Delhi 7 - 234



Rate in (RS.)

a) Horizontal type, multistage, centrifugal pump of cast iron

body & bronze impeller with stainless steel shaft,

mechanical seal to ensure a minimum pressure of

3.5kg./sq.cm. at highest and farthest outlet at specified

flow of 2850 lpm at 80 m.head confirming to IS:1520

b) Suitable HP 1500 RPM water cooled with rediator, diesel

engine conforming to relevant BS & IS standard

complete with auto starting mechanism, 12 volts /24

volts electric starting equipment, Diesel Tank (capacity

for 8 hrs. running) , exhaust pipe extended upto 1m.

outside pump house duly insulated with 50mm. thick

glass wool with 1.0mm. thick aluminium sheet cladding

,residential silencer, instruments and protection as per

specification, stop solenoid for auto stop in the event of

fault with audio indications, a set of semi rotary hand

pump filling the engine fuel tank together with hose pipe

5 mtr. Long with a foot-valve,painted with post office red

colour etc.






of Electric Motor driven automatic pressurization Jockey

Pump Set consisting of the following complete in all

respect as required and as specified from existing pump

room to new location of pump room with all accessories.

a) D. B. series pump of cast iron body & bronze impeller

with stainless steel shaft, mechanical seal of flow of 180

lpm at 80m.head confirming to IS:1520




Rate in (RS.)

b) Suitable HP SQ cage induction motor TEFC type

suitable for operation on 415 volts,3phase 50 Hz.AC with

IP 21 class of protection, for enclosure,horiziontal foot

mounted type with class -`F` insulation ,conforming to IS-

325.






of cubical type floor mounted control panel complete

with suitable relays, contactors, indicating lamps, fuses,

instrument isolator, automatic star delta type motor

starter conforming to IS 1822 and auxiliary switch

including connections complete as required for 1 nos.

main pumps (one for wet riser and spare space for

sprinkler pump and one diesel driven stand by) and 1

no. jockey pump and one spare space for jockey pump

as per CPWD specification Part V-1985 and its

amendments and Local Fire Department requirements

with modification if any from old pump room to new

pump room:-

1 Each

1.05 Supplying & fixing pressure switches in the M.S. Pipe

line inculding connection etc.as required. 4 Each

1.06 Supplying PVC insulated and sheathed armoured cables

of 1.1 K.V. aluminum conductor on surface/on existing

cable tray as per site requirement complete as required

and as specified.

a) 95 sq.mm x 3.0 core 60 Mtr.

b) 25 sq.mm x 3.0 core 30 Mtr.




Rate in (RS.)

1.07 Supplying , installation and testing of earthling with GI

earth plate 600mm x 600mm x6mm thick including

accessories and providing masonry enclousure with

cover plate having locking arrangement and watering

pipe etc. including charcoal or coke and salt complete as

required.2 Each

1.08 Providing and fixing 25mm x 5mm G.I. Strip in 40mm dia

GI pipe from earth electrode as required. 30 Mtr.

1.09 Providing and fixing 25mmx5mm G.I. Strip on surface or

in recess for earth connection as per specifications

complete as required. 30 Mtr.

1.10 Providing and fixing 8 SWG G.I. wire on surface or in

recess for loop earthing along with existing

surface/recessed conduit /submain wiring cable etc. as

per specification as required. 60 Mtr.

1.11 Supplying and installation Fire Pressure vessel of

450mm dia and 1m high fabricated from 8-10mm thick

M.S. Plate suitable for 10kg/sq.cm. working pressure

with accessories, painted with two coats of Postal Red

Enamel outside over a coat of primer and Epoxy Paint

inside for automatic operation of Pump.

2 Each

1.12 Providing 12 mm thick rubber mat 1000 mm wide as

per ASTMD 178/93 of required length as required for

med.voltage (11KV). 4 Mtr.




Rate in (RS.)

1.13 Fabrication and installation of following sizes of

perforated M.S. cable tray including horizontal and

vertical bends ,reducers ,tees cross -members and

other accessories as required duly suspenders from the

ceiling with M.S. suspenders and inculding painting with

post office red synthetic paint as required.

a) 300mm.(W) x50mm.(D)x1.6mm(T)40 Mtr.

1.14 Providing, fixing double flanged flexicon rubber

expansion joint ( Suitable for system test pressure) of

standard length as per manufacturer specs including

rubber gasket , flanges, nuts, bolts, washers etc.


a) 80 mm dia 2 Each

b) 100 mm dia 2 Each

c) 150 mm dia 3 Each

d) 200 mm dia 3 Each

1.15 Providing, laying, testing & joints and testing of `C` class

heavy duty M.S. pipes conforming to IS 3589/1239

including fitting like elbows, tees, flanges ,tapers, nuts

bolts, gaskets etc.,fixing the pipe on the wall/ceiling with

suitable clamps and painting with two or more coats of

synthetic enamel paint of required shade complete as

required.

a) 300 mm dia 6mm thickness 4 Mtr.

b) 200 mm dia 6mm thickness 5 Mtr.

c) 150 mm dia 10 Mtr.

d) 100 mm dia2 Mtr.

e) 80 mm dia3 Mtr.




Rate in (RS.)

1.16 Dismantling of existing M.S. heavy pipe & fitting by

cutting, welding etc., and re- installation in new pump

room.




d) 100 mm dia10 Mtr.

e) 80 mm dia6 Mtr.

1.17 Supplying, fixing, testing and commissioning of Cast iron

Y-Type Strainer Flanged with S.S 304 Perforated Screen

complete with Nuts ,Bolts,washers,gaskets of following

sizes as required.

a) 300mm dia.2 Each

1.18 Supplying ,fixing, testing and commissioning of butterfly

valve PN 1.6,with Bronze /Gunmetal seat duly ISI

marked complete with Nuts

,Bolts,washers,gaskets,conforming to IS 13095,of

following sizes as required.

a) 80 mm dia.1 Each

b) 100 mm dia.1 Each

c) 150 mm dia.2 Each

d) 200 mm dia.2 Each

e) 300 mm dia.1 Each




Rate in (RS.)


of butterfly valve PN 1.6,with Bronze /Gunmetal seat

duly ISI marked complete with Nuts

,Bolts,washers,gaskets,conforming to IS 13095,of

following sizes as required.

a) 80 mm dia.1 Each

b) 100 mm dia.1 Each

c) 150 mm dia.5 Each

d) 200 mm dia.3 Each

e) 300 mm dia.2 Each

1.20 Providing, installattion, testing and commissioning of

dual plate non-return valve of following sizes conforming

to is :5312 complete with rubber gasket, GI bolts, nuts

washer etc. as required.

a) 80mm dia.1 Each

b) 150mm dia.3 Each


of dual plate non-return valve of following sizes

conforming to is :5312 complete with rubber gasket ,GI

bolts, nuts washer etc. as required.

a) 80mm dia.1 Each

b) 150mm dia.5 Each

TOTAL OF SUB HEAD 1




Rate in (RS.)

2.00 SUBHEAD -2 : HYDRANT & WET RISERS.




bolts, gaskets etc.,in ground including excavation &

providing cement concrete with coaltar/asphalt tape as

per IS 10221 ,refilling the trench etc. of following sizes




c) 80 mm dia 6mm thickness30 Mtr.

2.02 Dismantling, re-laying, testing & joints and testing of `C`

class heavy duty M.S. pipes conforming to IS 3589/1239

including fitting like elbows, tees, flanges, tapers, nuts

bolts, gaskets etc.,in ground including excavation &

providing cement concrete with coaltar/asphalt tape as

per IS 10221 ,refilling the trench etc. of following sizes









required.






Rate in (RS.)

2.04 Dismantling, re-laying, testing & joints and testing of `C`

class heavy duty M.S. pipes conforming to IS 3589/1239





required.



2.05 Providing and fixing single headed internal hydrants

flanged valve with instantaneous stainless steel coupling

of 63 mm dia with cast iron wheel ISI marked

conforming to IS 5290( Type -A) with blank stainless

steel cap and chain as required. 25 Each

2.06 Fixing single headed internal hydrants flanged valve with

instantaneous stainless steel coupling of 63 mm dia with

cast iron wheel ISI marked conforming to IS 5290( Type -

A) with blank stainless steel cap and chain as required.

25 Each

2.07 Providing 63mm (2½ )" dia 15 m long canvas hose pipe

complete with stainless steel male & female coupling

copper wire wound with the pipe The pipe shall confirm

to IS. 4927 4 Each

2.08 Fixing 63mm (2½ )" dia 15 m long canvas hose pipe

complete with stainless steel male & female coupling

copper wire wound with the pipe The pipe shall confirm

to IS. 4927 26 Each




Rate in (RS.)

2.09 Providing 63mm 15 mm mtr. long RRL hose pipe with 63

mm dia male & female stainless steel couplings

conforming to IS 901 with copper wire wound with the

pipe conforming to IS 636 ( Type -A) as required.

70 Each

2.10 Providing and fixing first aid hose reel full swinging type

with 30 meter long 20mm dia rubber lined pipe with 6

mm dia stainless steel nozzle conforming to IS

8090.conforming toIS:884-1969 complete/

Thermoplastic reinforced flexible hose ISI marked

IS:12585 type-II as required. Including 25 mm dia M.S.

Pipe connection from riser to hose reel with all

sockets, Nipples, Elbows and 25 mm dia ball Valve as

required. 15 Each

2.11 Dismantling, re-fixing of first aid reel full swinging type

with 25 mm dia pipe & control valve as required.

20 Each

2.12 Supply & fixing 6 mm stainless steel nozzle with existing

hose pipe etc. 20 Each

2.13 Supplying & fixing 63 mm stainless steel branch pipe

with 20mm (nominal internal diameter) size stainless

steel nozzle conforming to IS 903, suitable for

instantaneous inlet coupling as required. 50 Each

2.14 Supplying and fixing 4 way fire brigade connection of

cast iron body with 4 nos. Gunmetal male instantaneous

inlet coupling complete with cap and chain as reqd. for

150mm dia MS pipe connection, conforming to IS 904

as required.4 Each




Rate in (RS.)

2.15 Providing and fixing set of "Siamese" quadruplet

instantaneous Fire Brigade inlet connections comprising

of two gunmetal instantaneous male inlet coupling

63mm dia with Plug and Cap, chain bends, tees etc.

for inlet to the static Tank. 1 Each

2.16 Providing and fixing Weather Proof standard hose

cabinet (900mm x 750 mm x 400 mm) out door type

suitable for accommodating yard hydrants made of

1.5mm thick M.S. sheet having central opening 4mm

thick glass glazed door including necessary locking

arrangements, painting one coat of primer and two coats

of Postal Red Enamel Paint and housing 2 Nos. canvas

hose pipe and branch pipe as required. (The cabinet

shall be floor mounted on suitable raised platform). The

shutters are to be lockable type. The words “Hose

Cabinet” to be painted on the box.

15 Each

2.17 Providing and fixing Fire hose cabinet glazed door

shutter and frame with hold fasts ( frame fabricated from

40 x 40 x 5mm and shutter from 35x35x5mm M.S.

angle) 1500 mm high x 1000 mm wide with locking

arrangement, 4mm thick glass with M.S. flats including

all accessories, painting with one coat of steel primer

and two coats of postal red enamel paint. The words “

Hose Cabinet” to be painted on the box.

35 Each




Rate in (RS.)

2.18 Supplying and installing Cylindrical type air vessel of

300mm dia, 1.0m high fabricated out of 8mm thick MS

plate suitable for 7kg / sq.cm. working pressure

complete with 25mm gunmetal air release Valve, Safety

Valve, Pressure Gauge etc as required. The air vessel

shall be continuous welded construction and painted

with two coats of Postal Red Enamel outside over a

coat of primer and Epoxy Paint inside.

6 Each

2.19 Dismantling, re-installation, Cylindrical type air vessel of

300mm dia, 1.0m high fabricated out of 8mm thick MS

plate suitable for 7kg / sq.cm. working pressure

complete with 25mm gunmetal air release Valve, Safety

Valve, Pressure Gauge etc as required. The air vessel

shall be continuous welded construction and painted

with two coats of Postal Red Enamel outside over a

coat of primer and Epoxy Paint inside.

2 Each

2.20 Providing and fixing 150 mm dia 4 way suction coupling

for FB withdrawal of water from the Fire Static Tank.

1 Each




Rate in (RS.)

2.21 Constructing masonery chamber 90x90x100cm, inside

75 class designation brick work in cement mortar 1:5 (1

cement:5 fine sand) for sluice valve, with C.I. Surface

box 100 mm. Top dia meter, 160 mm bottom dia meter

and 180 mm deep (inside) with chained lid and RCC top

slab 1:2:4 mix (1 cement:2 coarse sand:4 graded stone

aggregate 20 mm nominal size) necessary excavation

foundation concrete 1:5:10 (1 cement:5 fine sand:10

graded stone aggregate 50 mm nominal size) and inside

plastering with cement mortar 1:3 (1 cement:3 coarse

sand) 12 mm thick finished with a floating neat cement

complete as per standard design.

With F.P.S. bricks 21 Each

2.22 Providing & fixing dial type (100mm) Pressure Gauge

with isolation ball valve suitable for working pressure of

250 PSI. Cost shall be inclusive of providing any short

pieces, nipples, elbows etc. as required. complete in all

respects as required. 8 Each

2.23 Supplying ,fixing ,testing and commissioning of butterfly

valve PN 1.6, with Bronze /Gunmetal seat duly ISI

marked complete with Nuts ,Bolts,washers, gaskets,

conforming to IS 13095,of following sizes as required.

a) 80mm dia.15 Each

b) 100mm dia.2 Each

c) 150mm dia.8 Each




Rate in (RS.)

2.24 Providing ,installattion,testing and commissioning of dual

plate non-return valve of following sizes conforming to is

:5312 complete with rubber gasket, GI bolts, nuts


a) 150mm dia. 9 Each

TOTAL OF SUB HEAD 2

3.00 SUBHEAD -3 : SPRINKLER SYSTEM.

3.01 Providing, fixing, welded joints and testing of heavy

class M.S. ERW black pipes as per relevant IS

1239/3580 with special accessories tees, elbows,

flanged joints, rubber insertion, nuts, bolts, washers or

welded joint with flange joints on bends, including fixing

the pipe with suitable flat iron strip clamps/brackets

structural members dash fastner,civil breakage,making

good the same etc. painting with a primer coat and two

coats of postal red enamel etc. complete as required.

a) 150 mm dia 470 Mtr.

b) 100 mm dia 300 Mtr.


d) 65 mm dia 450 Mtr.

e) 50 mm dia 350 Mtr.

f) 40 mm dia 850 Mtr.

g) 32 mm dia 1400 Mtr.

h) 25 mm dia

1350 Mtr.




Rate in (RS.)

3.02 Dismantling, re-fixing, welded joints and testing of

heavy class M.S. ERW black pipes as per relevant IS

1239/3580 with special accessories tees, elbows,

flanged joints, rubber insertion, nuts, bolts, washers or

welded joint with flange joints on bends, including fixing

the pipe with suitable flat iron strip clamps/brackets

structural members dash fastner,civil breakage,making

good the same etc. painting with a primer coat and two

coats of postal red enamel etc. complete as required.

a) 150 mm dia 200 Mtr.

b) 100 mm dia 100 Mtr.


d) 65 mm dia 160 Mtr.

e) 50 mm dia 150 Mtr.

f) 40 mm dia 500 Mtr.

g) 32 mm dia 600 Mtr.

h) 25 mm dia 600 Mtr.

3.03 Providing and fixing Cast Iron body IS: 210 FG 220 and

double flange simple operation type Butterfly Valve

conforming to IS: 13095 with SS304 disc and shaft

nitnile rubber replaceable seat of the following size

complete with bolts, nuts, washers and rubber insertions

as per specification.

a) 80 mm dia 3 Each

b) 100 mm dia 14 Each

c) 150 mm dia 2 Each




Rate in (RS.)

3.04 Providing ,installattion,testing and commissioning of dual

plate non-return valve of following sizes conforming to is

:5312 complete with rubber gasket , GI bolts, nuts


a) 80mm dia.2 Each

b) 150mm dia.3 Each

3.05 Providing and fixing 15 mm nominal bore quartzoid bulb

type sprinkler of chromium plated, UL/FM approved (

spray type) suitable for operating on 68 deg. C as per

requirement of local fire services.

a) Pendent type - 680C

150 Each

b) Upright type - 680C

350 Each

c) Side wall type - 680C

200 Each

3.06 Fixing 15 mm nominal bore quartzoid bulb type sprinkler

of chromium plated, UL/FM approved ( spray type)

suitable for operating on 68 deg. C as per requirement

of local fire services.


750 Each

3.07 Supplying 15mm nominal bore quartzoid glass bulb type

(spray type) sprinkler of approved make, for

temperature rating of 680 C.


15 Each

b) Upright type - 680C

5 Each

c) Side wall type - 680C

3 Each




Rate in (RS.)

3.08 Providing and fixing 20 mm nominal bore chromium

plated, side wall extended through 6.5 mtr sprinkler

suitable for operating on 68 deg. C 450 Each

3.09 Supplying 20 mm nominal bore chromium plated, side

wall extended through sprinkler suitable for operating on

68 deg. C and through of 6.5m as per requirement by

Local Fire Services. 10 Each

3.10 Providing and fixing 2 core x 1.5 sq.mm copper

conductor PVC sheathed insulated armoured cable. 350 Mtr.

3.11 Providing and fixing 20 zone Annunciation panel for the

sprinkler system on A.C. supply with stand by battery

complete in all respects. 1 Each

3.12 Providing and fixing inspectors test assembly complete

with 50 mm test valve, sight glass sectional drain valve,

union with corrosion resistant office all complete strictly

as per drawing. 18 Each

3.13 Providing and fixing flow switch of approved make for

the Sprinkler annunciation system for the sprinkler

system.

a) 80 mm dia 12 Each

3.14 Providing & fixing dial type (100mm) Pressure Gauge

with isolation ball valve suitable for working pressure of

250 PSI. Cost shall be inclusive of providing any short

pieces, nipples, elbows etc. as required. complete in all

respects as required. 18 Each




Rate in (RS.)

3.15 Providing and fixing M.S. structure work fabricated from

standard sections e.g. MS square bars, flots, rounds,

angles, channels including cutting to size drilling,

welding, fixing & welding to insert plates in RCC

structure members as directed by Site Incharge,

including cutting and making good the walls, floors &

RCC roof (for pipe supports, clamps, M.S. ladders &

manholes for tank covers etc) including painting will two

or more coats of enamel joint of approved colour over a

coat of approved Steel Primer as for drawings &

direction of the Site Incharge.

750 Kg

3.16 Modification of existing sprinkler location including

cutting & removing the existing pipe and adding 25 mm

dia pipe.

New pipe upto 1.5 mtr. 61 Each

4.00 SUBHEAD 4 : EXTINGUISHERS

4.01 Providing and fixing 9 Litres capacity fire extinguisher

water type Gas Pressure conforming to IS: 940 marking,

fixed to wall. (ISI Marked) 47 Each

4.02 Providing and fixing 5 kg Dry powder or ABC

extinguisher with IS : 2171 (IS marked) 55 Each

TOTAL OF SUB HEAD 3




Rate in (RS.)

4.03 Providing and fixing fire extinguisher of Carbon Dioxide

type consisting of brand new high pressure Steel

Cylinder Bearing IS: 7285 mark and having the approval

of controller of explosives Nagpur, wheel type valve

Bearing IS:3224 mark internal discharge tube, 1 meter

long high pressure discharge hose, non conducting

horn, suspension bracket, fully charged Bearing IS:

marking fixed to wall as desired by Engineer-in-Charge.

a) 4.5 kg capacity Cylinder78 Each

b) 6.8 kg capacity Cylinder10 Each

4.04 Providing and fixing 9 Litres capacity mechanical foam

Extinguisher IS marked conforming to IS 13386 with all

accessories complete. 2 Each

4.05 Providing and fixing trolley mounted mechanical foam

type 50 Litres capacity without side cartridge type IS

marked conforming to IS :13386 with all accessories

complete. 1 Each

4.06 Providing and fixing Co2 water Trolley mounted fire

extinguisher of capacity 22.5 kg. ISI marked as per IS :

2878 with 5 mtr long braided hose horn. 1 Each

4.07 Providing and fixing self glowing Exit sign board size

350x200mm single side painted made of luminescent

safely, rigid sheet in standard colour, phot luminescent

sheet made of crystals consisting mainly sulphide in

protective glass like sheet green and yellow crystal

luminescent (glass in dark) by action of light.

55 Each

TOTAL OF SUB HEAD 4


In Figures In Words

Supply, Installation, testing and

commissioning of reversible escalators

having capacity of 9000 passengers per

hour at an operating speed of 30 linear

meter per minute, having width not

less than 1000mm between interior

panel, suitable for following rise from

floor to floor with electric motor,

control, latest safety devices, control

panel i/c stainless steel cladding etc. for

operation on 415V, 3 phase, 50Hz, AC

supply system as specified and as

required at site with auto start and

auto stop.

Travel rise from floor to floor:

b) 5.50 mtrs. 2 Job

Total

Amount ( Rs.)

1

ESTIMATE OF COST (ESCALATORS)

Sr. Description. Qty Unit

Rate in (RS.)

7 - 253

SL.N

o.

Qty. Unit

1 3 4

In Figures In Words

1

No. of Pax Travel speed

1.1.1 21 1 MPS 3 Jobs

Total

Rate in (RS.)

Amount ( Rs.)

Design, Fabrication, Supply, Installation, Testing & Commissioning of

Electric Traction Type fully automatic Machine room less (MRL)

Passenger Elevator having four sides transparent fire resistant glass

with AC variable voltage & variable frequency drive unit suitable for

operation on 415V, 3 Phase, 50 Hz. AC supply, having speed of 1 MPS,

power operated glass central opening / two-panel side opening type car

& landing doors, electro-magnetic brake system, operating panel with

luminous buttons, overload warning indicator, battery operated alarm

bell, emergency light, intercom suitable for hook up to AAI's EPABX,

infrared ray sensing door protection for full height, reverse phase relay

on controller, fire man's switch at ground floor, digital car positions

indicator in car & at all floors with up / down direction, light fixtures,

ventilation fan, landing sill, main beam in shaft for machine, pit ladder

etc. complete with all accessories serving different floors in the lift shaft

alongwith Automatic Rescue Device (ARD) complete with dry

maintenance free sealed batteries as required etc., as per detailed

specifications enclosed and as under: -

Estimates of cost (ELEVATORS)

Description of Items

2

PASSENGER GLASS ELEVATORS

7 - 254

BOQ for BMS

Qty. Unit Rate

In Figure In Word Amount (Rs.)

A BUILDING MANAGEMENT SYSTEM

1 CENTRAL CONTROL STATIONS (INDIGENOUS)

Supplying, Installing, Testing & Commissioning

of the Central Control Stations consisting of the

following

1.1 Computer System with Printer & UPS

1 Set

2 Supply, installation, testing & commissioning of

the following graphical Software. Providing

facilities to create static & animate the graphics,

navigation between the pages, display of logs,

changing the time zones, popup alarms,

configurable password etc.

2.1 Supply, Installation, Testing & Commissioning of

BMS System Software : Graphical interface software

based on MS Windows XP complete software

package as required to execute the required

functions and generate necessary dynamic graphics

and building plans.The Entire System from Software

Level to Field Controller Level shall be on

Bacnet/Modbus Protocol.1 Set

3 Supply, installation, testing & commissioning of

the following controllers:

Description

BUILDING MANAGEMENT SYSTEM

S.No

Transport Department , NCT of Delhi 7 - 255

BOQ for BMS

Qty. Unit Rate

In Figure In Word Amount (Rs.)DescriptionS.No

Stand alone, intelligent, ANSI/ASHRAE approved

Interoperable BACnet Controllers(IBC) as per the

specifications.All the Controllers shall be UL Listed

& BTL tested & CE certified. Each controllers shall

be equipped with Universal Inputs with Internal

Loop/Process Speed not more than 1/10th of a

second(100 Millisecond). The controllers shall be

housed in a vandal proof, lockable and secure MS

Cabinets to be supplied along with the controllers.

The controllers shall have 20% extra IO capacity

per type of I/O's. The contractor shall estimate the

required quantity of controllers to suit the complete

requirement / operation as per Input / Output

Summary attached with the specification &

according to their system architecture and the

quantity shall be mentioned in their offer.

3.1 Direct Digital Controllers for AC Plant as per I/O

Summary1 Set

3.2 Direct Digital Controllers for Air Handling Units-1

DDC per AHU

35 Nos.

3.3 Direct Digital Controllers for DG Sets

1 Set

3.4 Direct Digital Controllers Cooling Tower &

Condenser Pumps for DG Sets

1 Set

3.5 Direct Digital Controllers for Air Washer Units

1 Set

3.6 Direct Digital Controllers for Scrubber Units

1 Set


BOQ for BMS

Qty. Unit Rate


3.8 Direct Digital Controllers for Basement Axial Fans

1 Set

3.9 Direct Digital Controllers for Staircase Pressurisation

Fans

1 Set

3.10 Direct Digital Controllers for Lift Pressurisation Fans

1 Set

3.11 Direct Digital Controllers for Smoke Extraction Fans

1 Set

3.12 Direct Digital Controllers for Fire Fighting Systems

1 Set

3.13 Direct Digital Controllers for Hydropnuematic

Systems

1 Set

3.14 Direct Digital Controllers for Electrical Systems

1 Set

3.15 Direct Digital Controllers for Lighting Systems

1 Set

3.16 Direct Digital Controllers for Lift Systems

1 Set

3.17 Direct Digital Controllers for RO Plant

1 Set

4 Supervisory Controller & Integrators


BOQ for BMS

Qty. Unit Rate


4.1 ANSI/ASHRAE approved Network control unit to

interface with BACnet/Modbus Devices

simultaneously having inbuilt real time clock,

supporting TCP/IP connectivity .The System

Integration Unit shall be UL Listed & BTL tested &

CE Certified. The units shall be housed in a vandal

proof, lockable & secure wall mounted MS Cabinets

to be supplied along with the Controllers. The

contractor shall estimate the required quantity of

NAC according to their system and the quantity shall

be mentioned in their offer.

1 Set

Integrator for Chiller System/VFD/DG SETS

4.2 Providing, Testing & Commissioning of all necessary

Hardware & Software for interfacing with Chiller

System on BACnet/IP or MODBUS-RTU

Communication Protocol.1 Set


Hardware & Software for interfacing of DG Sets on

MODbus-RTU over RS-485 Communication

Protocol.1 Set


Hardware & Software for interfacing of VFD's for

secondary Pumps on MODbus-RTU over RS-485

Communication Protocol.1 Set

5 SENSORS & FIELD DEVICES

Supplying, installing , testing & commissioning of the

following Sensors / Transmitters / Transducers

5.1 Immersion type temperature sensors for measuring

Chilled water & condenser water supply and return

temperature (Range 32-160 deg. F)

52 Nos.


BOQ for BMS

Qty. Unit Rate


5.2 Thermowell For Immersion Type Temperature

Sensor52 Nos.

5.3 Water Flow Meter-200 MM Dia Line Size

1 Nos.

5.4 Outside air temperature sensors for measuring

outside air temperature (Range 35-130 deg. F)

1 Nos.

5.5 Outside humidity sensors for measuring the outside

air relative humidity

1 Nos.

5.6 Level Switches for indicating Water level in tanks.

26 Nos.

5.7 Differential pressure switches across AHU Filters &

Fan blowers for indicating blower status. Pressure

differential – 10 mm – 50 mm171 Nos.

5.8 Duct type temperature sensor for measuring Return

air & Supply air temperature at the Air Handling

Units (Range 45-150 deg. F)35 Nos.

5.9 Differential Pressure Swicth Across Pumps for Pump

Run Status

41 Nos.

5.10 Oil Level Switch for Diesel Tank

6 Nos.

5.11 Voltage Transducer

4 Nos.

5.12 Weather Proof Lux Level Sensor

1 Nos.


BOQ for BMS

Qty. Unit Rate


5.13 Differential Pressure Transmitter for Scondary

Pumps-Across Load for Interlock Function to

Command VFD1 Nos.

5.14 Pressure Transmitter for Line Pressure Monitoring

13 Nos.

5.15 Water Flow Switch

8 Nos.

5.16 Motorized Butterfly Valve with On/Off Actuator-200

MM

8 Nos.

5.17 Motorized Butterfly Valve with On/Off Actuator-250

MM

8 Nos.

6 WIRING

6.1 Supplying, installing, testing and commissioning of 2

C x 1.5 Sqmm Signal Cables

18900 RMT

6.2 Supplying, installing, testing and commissioning of

Communication Cables

2400 RMT

6.3 Supplying, installing, testing and commissioning

PVC Conduits of following dia, complete with all

accessories:

a. 25 mm dia

21300 RMT

Total


In Figures In Words

1 Public Address system 1 Job

TOTAL

Note: The contractor should refer technical specications given for the same in the tender document

volume II - Technical Specifications Part 8 - Public Address (PA) System

Public Address (PA) System Works

Amount ( Rs.)Sr. Description Qty Unit.

Rate in (RS.)

7 - 261

BOQ for PIS

Sr.

No.

Item Descipition QTY Unit Price (Rs.) Total Price (Rs.)

1 10 Line LED line Display Board for Departure

(as per specifications)

4

2 2 Line LED Indicator Board at Bus parking bay


45

3 32” TFT-LCD Display (with Intelligent

Controller) with wall mount for Ticket counters


25

4 46” TFT – LCD display (with Intelligent

Controller) with ceiling/wall mount (as per

specifications).

15

5

Supply, installation, testing and commissioning

of 20" High resolution TV monitor with

computer and associated software for operation

as self supported touch screen information

kiosk (computer to be embedded along with the

monitor) . The software shall be of user

friendly GUI,containing all necessary data of

ISBT information such as departure -arrival

information ,security guidelines , ISBT facilities

,city route from ISBT, hotel facilities and other

salient feature needed for the passengers.

3

6 Data Entry Terminal (Client System) as per

specifications.

5

Schedule & Quantity of PIDS-ISBT


BOQ for PIS

Sr.

No.


7 Two Servers to work in load sharing mode with

single monitor,key board and mouse operated

with the help of KVM switch (as per

specifications) to work as Main/Stand By

2

8 IVRS Server (as per specifications) 1

9 AFAS Server (as per specifications) 1

10 24 Port 100/1000 Mbps switch as per

specifications

9

11 Power distribution panel for installation in

equipment room / field as per specifications

5

12 10KVA On line UPS as per specifications 2

13 Supply of 25 mm dia 16 SWG ISI marked MS

conduit .

2000

14 Supply of UTP Cat 6 cable . 1500

15 Supply of 3 core 48/0.2mm dia ABC conductor

PVC insulated PVC sheathed Unarmoured power

cable.

1500

Sub Total (A)

16a Laying & fixing Sr. No. 13 on wall/ceiling with

accessories as required.

2000


BOQ for PIS

Sr.

No.


16b Pulling of Sr. No. 14 through already laid

conduit

3000

16c Pulling of Sr. No. 15 through already laid

conduit

2500

17 Supply Installation of OS and Application

software including customization as required

1

18 Installation, Testing & Commissioning 1

SUB Total (B)

Grand Total


BOQ CCTV

S. No Description Qty Unit Rate Amount

1.0 CCTV SYSTEM

1.1 Supply , installation, testing and commissoning of Dome

camera 1/3" colour dome camera, 380 TVL, 3,6mm

lens,suitable for 0.5 Lux complete as required

3 Nos.

1.2 Supply, Installation, Testing & Commissioning of 1 / 3"

HAD, CCO 550 TVL, 0.002Lux DSS / DVR motion

detection, DC, 21V PAL with varifocal 2.8mm -8mm

lense and IP-66 housing complete as required and as

per specifications. (Box type camera in IP-66 housing.)

15 Nos.

1.3 Supply, installation, testing & commissioning of 1/3"

colour fixed Dome camera, 480 TV lines resolution,

3.6mm fixed lens, suitable for 0.1 lux complete as

required. 20 Nos.


channel Digital Video recorder with 2 video outputs

having 250 GB Hard Disk facility recording @ 400

frames per second with TCP/IP Connectivity as per

specification required.3 Nos.

1.5 Supply, installation, testing & commissioning of 17"

CCTV colour Monitor including all accessories

(Connectors, Screws etc.)

4 Nos.

BOQ For CCTV SYSTEM


BOQ CCTV

S. No Description Qty Unit Rate Amount

1.6 Supply, installation, testing & commissioning of 21"

CCTV colour Monitor including all accessories

(Connectors, Screws etc.)

4 Nos.

1.7 Supply & installation, testing & commissioning of Power

supply units required for the above cameras.

10 Nos.

1.8 Supply and surface laying of 3 x 1 sq.mm AC Power

cable in existing MS conduit.

2000 Mtr.

1.9 Supply and laying of RG-11 CO-axial Video cable in

existing conduit (From Camera to DVR)

2000 Mtr.

TOTAL OF CCTV SYSTEM CARRIED OVER TO

SUMMARY.


S.NO. SUB-HEAD AMOUNT (Rs.)

1 Parking Management system

2 Vehicle Counting System

3 Occupancy Sensor

4 Peripheral Equipment

5 Implementation & Commissioning

6 Guidance System

Total

NAME OF WORK :- REDEVELOPMENT OF ISBT AT KASHMERE GATE, DELHI

Abstract for Parking Management system

7 - 267

BOQ for Parking Management System

(A) Description Qty. Unit Price (INR) Item Total (INR)

Bus Entry Lane

1 Barcode Ticket Dispenser 2

issue barcode parking ticket with entry record at entrance.

intelligent controller that can run in stand-alone or on-line

mode.

with LCD dislay to give guidance to driver during transaction

time.

high paper roll capacity of at least 1,900 tickets per roll.

built-in photo sensor to give paper roll low level indication.

casing with outdoor type of epoxy powder coating in blue

color.

internal mounting bracket ready for intercom & season reader.

2 Mid-range Proximity Reader 2

reading distance up to 1 meter.

reader interface & extrenal relay board.

power supply unit & rechargeable battery.

3 Automatic Lane Barrier 2

barrier opening time below 1.8 second.

intelligent embedded barrier controller.

barrier arm with total length of 3 meter.

barrier arm cover with protective foam & reflective stripe.

casing with outdoor expoxy powder coating in yellow & blue

color.

Parking Management System




4 Vehicle Loop Detector (single channel) 4

5 License plate recognition camera 2

Takes a picture of the frount of car and reads rajistratio plate

~number. Transmits captured images to LPR system

Entry: Prints recognized Bus number plate on the short term

ticket

Stores Parking information and bus plate number images.

Exit: Check whether parking information and Bus number

plate correspond with each other.

When both of them are not identified, processes Bus accessing

after checking on Zone Computer.

Camera unit : Digital camera or CCD camera

Busnumber recognition unit : Vehicle number plate

Image Server : Stores Parking ticket information,

Bus number plate and Image

Interface : Shares information between Zone Computer and

image server.

Advantages

Prevents illegal usage of tickets

Checks entering time on bus registration number plate,

if drivers lose tickets.

Controls bus entering and exiting




6 Exit Ticket Verifier 2

check & verify validity of payment on parking ticket at exit.

intelligent controller that can run in stand-alone or on-line

mode.

with LCD dislay to give guidance to driver during transaction

time.

with intelligent & low maintenance contact-less barcode

scanner.

reliable ticket roll in mechanism to capture & retain verified

ticket.


color.

internal mounting bracket ready for intercom & season

reader.

7 Mid-range Proximity Reader 2

reading distance up to 1 meter.

reader interface & extrenal relay board.

power supply unit & rechargeable battery.

8 Automatic Lane Barrier 2

barrier opening time below 1.8 second.

intelligent embedded barrier controller.

barrier arm with total length of 3 meter.

barrier arm cover with protective foam & reflective stripe.

casing with outdoor expoxy powder coating in yellow & blue

color.





10 Exit Payment Station 2

high quality Intel motherboard & chipset.

high speed Core 2 Dual central processor.

high performance 512MB RAM & 160GB hard disk.

high contrast & wide 15” LCD colour monitor.

intelligent proprietary micro-controller board.

fast switching equipment relay board.

rhigh speed receipt printer with validation.

portable automatic barcode scanner.

customized keyboard for parking operation.

secure lockable cash drawer with coin & note box.

high brightness 5 digits of seven-segment parking fee display.

intelligent & user friendly parking payment software.

nine (9) standard reporting formats.

one Microsoft Windows XP operating software license.

secure lockable enclosure to provide better security

(B) Vehicle Counting System Qty.

1 Vehicle Counting Display 4

high performance intelligent VCD controller.

display to indicate available pay bay at each zone.

main display with 6 rows for 6 different bus parking zones.

high contrast 5 digits seven-segment LED display for each row.

front cover with acrylic with label stciker for each bus parking

zone.


color.

mounting bracket & pole/gantry to be provided by customer.




main display at each bus park entry for incoming vehicle.

suggest another 2 main display at strategic location at B1 floor.

more display can be added later upon customer request.

2 Zone Counting Controller 2 60,000 120000 2

intelligent controller linking to vehicle detection sensor.

one controller for all sensor at each zone crossing border.

power supply unit & rechargeable battery for each controller.

suggest 8 units for B1, 8 units for B2 & 6 units for B3.

more controller can be added later upon customer request.

3 Master Counting Controller 2

intelligent controller linking to Zone Counting Controller.

alll ZCC at each parking floor , will be linked to one MCC.

power supply unit & rechargeable battery for each controller.

more controller can be added later upon customer request


2 detectors for each parking zone crossing border.

5 Vehicle Counting Control (VCC) Station 2

high quality Intel motherboard & chipset.




high speed Xeon Dual Core processor.

high performance 1GB ECC DDR2 RAM.

high capacity 160GB hard disk for data storage.

high contrast & wide 17" LCD colour monitor.

real-time monitoring of vehicle counting control.

on screen info display with parking zone layout drawing.

setting of zone info & number of bay per parking zone.

5 standard VCC software report formats on zone occupancy.

(C) Occupancy Sensor Qty.

1 Data converter 4

Rated Voltage : 220VAC+10%

Power Consumption: 10W

Upward communication: RS+B232

Downward communication: RS485

Baud Rate: 9600 BPS

Max Load capicity: 128

Load Object: communication controller, guidance display

Overall Size: 420 x 260 x 60 (mm)

Weight: 3Kg

2 Ultrasonic Detactor Controller 4

Rated Voltage : 220VAC

Output Voltage: 18 ‐24V DC

Power Consumption: 8V

Communication Protocol: RS 485

Max Load capicity: 32, sets of ultrasonic detactor & LED

Indicator

Baud Rate: 9600bps

Overall Size: 275 x 320 x120 (mm)




weight: 6kg

3 Space LED Indicator 60

Input Voltage: 18‐24V DC

Power Consumption: 0.36w

LED QTY: 4 red, 4 green

Outline Dimension: 75 x 75 x 50 x (mm)

Housing Material: ABS

Enrivonment Temperature: ‐10°C ~60°C

Communication mode: RS485

weight: 200 g

(D) Peripheral Equipment Qty.

1 Microsoft Windows SBS Premium 2003 c/w 5 CAL (OEM) 1

Microsoft Windows 2003 Server & SQL 2000 Server.

2 Serial Communication Convertor 4

To convert RS 485 to RS 232 Signal.

Require when connecting to SMC computer.

3 Master Intercom (10 call) 2

able to connect up to 10 sub-stations.

with power supply unit.

4 Intercom Sub-station 11

5 8-Port Network Hub 10

6 Power Surge Protector 16

minimize the risk of equipment damaged if strike by lightning




7 Signal Surge Protector 12

minimize the risk of equipment damaged if strike by lightning

8 Network Surge Protector 13

the risk of equipment damaged if strike by lightning.

(E) Implementation & Commissioning Qty.

1 Project Implementation 1

supervision of equipment installation and termination of

cables.

include two commissioning trips for our engineer to go to site.

up to seven days on site per trip; additional day chargeable at

INR 2500/day.

labor, man-power, tools & machinery at site to be provided by

customer.

hotel accommodation at site shall be provided by customer.

2 Training & Commissioning 1

initial price table, holiday & other parameter setting.

full system hardware & software integration test

1 day on site training on system operation.

1 day on site training on equipment maintenance.

2 copies of system operation manual in English.

2 copies of equipment maintenance guide in English.

(F) Guidance System Qty.

1 Bus Parking Guidance System 60

Ultrasonic detector and loop detector monitor real-time




space status, and report to host controller.

Data converter submits information acquired from controllers

to

PC-based guidance control system

Guidance control system updates real-time available space on

associated guidance displays after logical judgments on overall

parking status.

Guidance displays interact with each other, indicating car

driver

from entry to exit

Red/Green LED indicators visually assist driver to a vacant

space.

SYSTEM FUNCITON

Increase parking efficiency

Increase client loyalty and car park rotation

Reduce fuel consumption and combustion emission

Optimize human resource

Realize user-controlled override or space reservation.

Report available to assist car park management

total


Boq for Landscaping Works

In Figures In Words

1.0 Uprooting rank vagetation and weeds by digging the

area to a depth of 60cm removing all weeds and other

growth with roots by forking repeately, breaking clods,

rough dressing,flooding with water,uprooting fresh

growth fresh growth after 10 to 15 days and then fine

dressing for planting new grass,including disposal of all

rubbish with all leads and lifts. 2500 100 Sqm

2.0 Supplying and stacking of cow dung manure at site

including royalty and carriage upto all lead and lift ( cow

dung manure measured in stacks will be reduced by 8%

for payment ) 250 Cum

3.0 Spreading of sludge ,dump manure or / and good earth

in required thickness ( Cost of sludge ,dump manure or /

and good earth to be paid seperately ) 250 Cum

Amount ( Rs.)

LANDSCAPING & HORTICULTURAL WORKS

Sr. Description Qty Unit

Rate in (RS.)


Boq for Landscaping Works

In Figures In Words Amount ( Rs.)Sr. Description Qty Unit

Rate in (RS.)

4.0 Ground Covers - Complete maintenance of

Grassing/Ground Cover with water for 12 months

including weeding, hoeing, watering, pruning application

of good earth, manure, insecticides, fungicides &

fertilizers, security of plants, disposal of garden rubbish

from the premises to the approved municipal dumping

ground replacing casualty of plants (occurred due to any

reason) by healthy plants. All the material required for

maintenance including water shall be provided by the

contractor (cost of material included in the item) and

nothing shall be provided by the department.

a) Golden Duranta of ht 15-20 cm in earthern pots of

size 20cm well developed 2500 Sqm

5.0 Supplying and stacking of good earth at site including

royalty and carriage up to 1km (earth measured in

stacks will be reduced by 8% for payment) 825 Cum

Total


BOQ for External Sighnages

SNO. DESCRIPTION UNIT QTY. RATE AMOUNT

NOTE :-

i) All the shop drawings for the Signages work got to be

approved by the Engineer -In Charge.

ii) All text and pictogram shall be in Retro Reflective Tape

of approved make & shade or as specified in the drawing.

A INTERNAL SIGNAGES :-

1.00 SW Series ( wall /Door mounted illuminated sign ) Drg. Ref.- SG - 01

a) Providing and fixing Wall/Door mounted iluminated sign as

shown in the drawing with all the necessary texts and

pictogram with Powder coated aluminium frame work of

specified sections ,fixtures ,fittings along with the 4mm

thick perplex sheet in white colour and making all the

arrangements for the lighting fixtures etc. complete as per

the directions of the Engineer-In-Charge. Each 22.00

SW Series ( wall /Door mounted Non-Illuminated Sign ) Drg. SG - 01

b) Providing and fixing Wall/Door mounted Non-illuminated

sign as shown in the drawing with all the necessary texts

and pictogram with frame work of specified sections

,fixtures ,fittings along with the 6mm thick toughened glass

having the backing of 4mm thick ACP sheet in approved

colour fixed with the help of 25 dia SS studs , etc.

complete as per the directions of the Engineer-In-Charge. Each 43.00

2.00 SC Series ( Ceiling Hung ) Drg.Ref No. SG-05,SG-05,SG-06

SCHEDULE FOR INTERNAL AND EXTERNAL SIGNAGES.

Transport Department, NCT of Delhi 7 - 280



Providing and fixing Ceiling hung sign as shown in the

drawing with all the necessary texts and pictogram with

Powder coated aluminium frame work of specified sections

,fixtures ,fittings along with the 1.5mm thick SS sheet in

brushed finish as shown and making all the arrangements

for the lighting fixtures etc. complete as per the directions

of the Engineer-In-Charge. Each 20.00

3.00 SB Series ( wall mounted - Bracket ) Drg Ref. SG-02

Providing and fixing Wall mounted bracketed sign as

shown in the drawing with all the necessary texts and

pictogram with specified sections ,fixtures ,fittings along

with the 6mm thick toughened glass having the backing of

4mm thick ACP sheet in approved colour fixed with the

help of 25 dia SS studs , etc. complete as per the

directions of the Engineer-In-Charge. Each 24.00

4.00 SF Series ( Floor mounted ) Drg Ref. SG-03

Providing and fixing Floor mounted sign as shown in the

drawing with Mount's fabricated from 75 dia SS hollow

section welded with the base plate of 150 dia 10mm thick

SS brushed finished plate fixed on the the floor with the

help of 100mm long Hilti Fasteners,The sign shall have the

backing of 2mm thick Aluminium powder coated sheet of

approved shade and front of 4mm thick acrylic sheet for

text and pictogram as specified with all the necessary

fixtures ,fittings and making all the necessary

arrangements for the electrical fixtures complete as per the

direction of the Engineer-In-Charge. Each 6.00

B ESF Series EXTERNAL SIGNAGES :-




6.00 Providing ,fabricating and fixing floor mounted sign as

shown in the Drawing SG016,17,18 having frame work of

tubular sections fitted on the floor with the help of M.S

Angle and Dash Fasteners.The frame work shall be

covered with 4mm thick ACP sheet on both sides fixed to

the frame work with Aluminum 'C'channel of specified size

with all necessary fixtures,fittings ,silicone etc.complete as

per the direction of the Engineer-In-Charge. No. 23

7.00 Main ISBT Signage

Providing ,fabricating and fixing Wall/ RCC mounted sign (

ISBT Signage ) as shown in the drawing with 4mm thick

perplex sheet ( blue shade ) in the front and text in 4mm

thick perspex sheet ( white shade ) fixed to the perplex

sheet in blue shade with the help of adhesive and fastenes

to the box type frame of specified size made up of 2mm

thick Aluminium sheet, including all fittings and fasteners

etc. complete as per the direction of the Engineer-In-

Charge.Each 1.00

Total


y7. bill of quantities 20 jan

Documents