zoos and aquariumsreal-world expertise former curators/operators bringing valuable expertise and...

ZOOS AND AQUARIUMSORDERS AND ADVICE: 877.347.4788 • SHOP ONLINE: PentairAES.com

Online Orders: PentairAES.com / Phone Orders and Tech Advice: 877.347.4788

2 INTRODUCTIONTABLE OF CONTENTS/HOW TO ORDER

TABLE OF CONTENTSAQUATIC LIFE SUPPORT .......................3

PUMPS ...................................................6

VALVES .................................................17

FILTRATION .........................................20

HEATERS/CHILLERS ...........................38

COMPLETE SYSTEMS ..........................39

CONTROLLERS/MONITORS .................40

SYMBOL LEGEND

DESIGNED HERE

DESIGNED HEREOur expertise backs these items, so you can expect better performance and reliability than from similar products.

FW SW

FRESH WATER OR SALT WATERIndicates products that are compatible with fresh water or salt water.

FIND US ON

EASY WAYS TO ORDER

Online Email Mail

PentairAES.comEnjoy the convenience of online shopping on our secure website.

[email protected] Pentair Aquatic Eco-Systems, Inc.2395 Apopka Blvd.Apopka, FL 32703

Phone For International Orders

407-886-3939 (Local) 877-347-4788 (Toll Free)407-886-4884 (Fax)

Call from 8:00 AM–7:00 PM Monday to Thursday, 8:00 AM–5:00 PM Friday.

Mail your order to the address above or: Phone: 407-886-3939Fax: 407-886-4884

ENJOY FREE SHIPPING! Free shipping for orders over $50 on all ground shipments*. *Visit PentairAES.com for details and restrictions.

WORLDWIDE SALES AND SERVICEPentair Aquatic Eco-Systems, Inc., has served over 150 countries worldwide. Now with additional corporate offices in North America, Chile and China, our global sales and service support increases immensely. This includes multi-language catalogs and international customer service representatives, which will bring you a better customer experience.

Corporate offices in Cary, NC Operations and sales office in Apopka, FL Operations and sales office in Beverly, MA Operations and sales office in Vancouver, Canada Operations and sales office in Puerto Montt, Chile

Operations and sales office in Suzhou City, China Operations and sales office in Brisbane, Australia Sales office in Dubai, United Arab Emirates Sales office in Dandenong South, Australia Sales office in Milperra, Australia

Sales office in U.P, India Sales office in Herentals, Belgium Sales office in Singapore Sales office in Rome, Italy Customers served worldwide

PENTAIR AES 5 PILLARS3AQUATIC LIFE SUPPORT

ABOUT US

SINGLE-SOURCE PARTNER

A single-source provider of equipment, expertise and accountability for virtually all water-related applications

A TEAM WITH DEEP, REAL-WORLD EXPERTISE

Former curators/operators bringing valuable expertise and experience

PRODUCT AND SOLUTION INNOVATION

An innovator that consistently brings value to the industry and its business via new ideas, equipment and solutions for every challenge

COMMITMENT ACROSS THE ENTIRE SYSTEM LIFE CYCLE

From system commissioning and start-up through maintenance and troubleshooting

A COMPANY THAT WINS RIGHT

We are committed to absolute integrity, respect and performance excellence in everything we do

SOLE PARTNER VALUE INNOVATION PERFORMANCE WIN RIGHT


DISTRIBUTERS OFAirSep

Aqua Logic

Aquaculture Systems Technologies

Asahi/America

Custom Structures Corporation

Del Ozone

Delta Hydronics

Fuidtrol

GF

International Ozone

Iwaki America

Kasco

MDM Incorporated

Ozone Water Systems

Pacific Ozone

RK2 Systems

YSI

4

Aquatic life support systems, whether for zoos or aquariums, demand nothing short of state-of-the art solutions. For this reason, we offer a team of designers, engineers and biologists dedicated to helping animals thrive in zoos, public aquariums and other large facilities.

We’re driven by innovation and a deep knowledge of aquatic science. Whether you need assistance with concept development, project management, retrofitting, turnkey systems, training or troubleshooting, we have the vision and expertise to bring your aquatic system to life. Because Pentair Aquatic Eco-Systems features the world’s widest selection of products and resources, each of our solutions is backed by unparalleled service support.

AQUATIC LIFE SUPPORT

DESIGN Receive expert advice on exhibit concept development, design and layout and life support system requirements based on animal and exhibit needs and mechanical area layout. If you want to maximize your facility’s performance while remaining within budget, then our knowledge, training and experience are reliable and proven.

SUPPLY Pentair Aquatic Eco-Systems is the manufacturer and supplier of a large variety of products specially made for aquarium and zoo applications. We offer pumps, filters, sterilization equipment and more, and can provide custom skid filtration systems and control systems. And with our team of life support specialists, we will make sure the equipment is right for the application.

PROJECT CONSULTATION We are uniquely suited to assist our clients by drawing on our extensive field experience to make sure your system is not only functional but also easy to use and maintain. We will even coordinate with other trades and can work together with other contractors to assure your filtration equipment is installed and integrated properly.

5


6 PUMPSSPARUS PUMP WITH CONSTANT FLOW TECHNOLOGY

Under typical operating conditions, Sparus Pump with Constant Flow Technology offers the highest water flow rate of any high performance pump—with the lowest electricity consumption. Thanks to its integrated on-board variable frequency drive, this pump automatically calculates and self-adjusts to provide the exact operational speed needed to deliver the exact flow rate you establish. As system conditions change, it self-adjusts to achieve a constant user-specified flow rate. The result of this breakthrough technology is that you achieve the absolute minimum energy usage required to deliver any given flow rate! This high level of efficiency can save you thousands of dollars per year in pump operating costs.

No more closing valves to decrease flow rate or making manual adjustments. Simply select the flow rate you require and the Sparus Pump with Constant Flow Technology delivers. As system conditions change, the flow rate remains constant. Need a higher or lower flow rate? Simply adjust the desired flow rate by using the simple keypad. No matter what flow rate you select, you’ll rest assured that your desired flow rate remains constant.

The law of physics known as the Affinity Law states that there is a cubic relationship between the speed of an electric motor and its power consumption. By decreasing the speed of a motor by only 10%, you’ll reap up to 33% in electrical energy savings while still achieving the exact flow rate that your application requires. With conventional pumps, the motor is often operating at a speed that is needlessly high for the application. Users of conventional single-speed pumps often find that their only option to decrease their flow rate is to partially close a valve to “throttle” the flow rate. The Sparus Pump with Constant Flow Technology takes that paradigm and turns it on its head! The intelligence built into this pump means that you establish the desired flow rate and leave the decision-making to the pump.

SPARUS™ PUMP WITH CONSTANT FLOW TECHNOLOGY™

• The world’s first aquaculture duty pump to deliver a CONSTANT user-defined flow rate.

• Pump motor speed self-adjusts to maintain the constant flow rate setting, even as system conditions change.

• Digital communication port RS-485 allows monitoring/control by PLC systems. Contact us for solutions utilizing a PLC.

IN-HOUSE REPAIR AND SERVICE AVAILABLE Contact Pentair Aquatic Eco-Systems for more details.

3 hp totally enclosed fan cooled motor, with permanent magnets.

Saltwater-rated 316 stainless internal fasteners, and heavy-duty mechanical seal.

Oversized strainer basket and volute.

NEMA IP55 rated enclosure for robust service in wet locations.

2” NPT suction and discharge ports.

Integrated wiring compartment for easy access

and quick installation.

On-board keypad for simple programming of

desired flow rate.

Clear lid for quick inspection of basket.

Cam and Ramp locking ring for easy servicibility.

Corrosion-proof pump body for long service life.

RS-485 Port


7PUMPSSPARUS PUMP WITH CONSTANT FLOW TECHNOLOGY

SPARUS™ PUMP WITH CONSTANT FLOW TECHNOLOGY™

Sparus Pump with Constant Flow Technology(CFT) will always operate at the slowest speed required to achieve the user-established flow rate; the savings it provides is yours to keep! This pump delivers proven reliability thanks to its saltwater-rated stainless steel internal fasteners and highly robust mechanical seal. Sparus Pump with Constant Flow Technology is a self-priming pump, and it’s also suitable for flooded-suction applications. UL778 listed. One-year warranty. Made in USA. Not certified for use in swimming pool applications.

PUMP FEATURES: • Fully-programmable for any flow rate from 20–140 gpm

• On-board keypad for simple programming of desired flow rate

• 3 hp rating. 230V, single-phase, 50hz/60hz

• Ultra efficient permanent magnet TEFC motor

• 2” internally threaded NPT inlet/outlet ports and anti-blocking strainer basket ensure maximum flow and efficiency

• Easy installation and trouble-free servicing

• IP55-rated enclosure for wet locations and harsh conditions

SPARUS WITH CFT COST SAVINGS CALCULATORThe Sparus Pump with Constant Flow Technology Cost Calculator Tool calculates the savings an operator will realize when switching from a standard pump to the Sparus with Constant Flow Technology. It’s simple and easy to use. Just enter in the operational, hydraulic, and head loss characteristics of your system and the cost savings, per day and per year, will be instantly calculated for you.

Visit PentairAES.com/CFT-Calculator to determine your savings!

Capacity in US Gallons Per Minute

M FT

20

40

60

80

100

10

00

30

50

70

90

20 40 60 80 100 120 140 160 GPM10

5 10 15 20 25 30 35 M3/HR

0 30 50 70 90 110 130 150

Tota

l Dyn

amic

Hea

d in

Fee

t of W

ater

Best Ef�ciency Sizing

5

10

15

20

25

30

3000 W2500 W

2000 W1500 W

1000 W

750 W500 W

300 W200 W

150 W

120 W

Sparus Pump with Constant Flow Technology Performance Chart

Sparus Pump with Constant Flow Technology in a five pump application at Pentair Aquatic Eco-Systems’ PAES W.A.T.E.R. facility in Apopka, FL.

MODEL HPPOWER(KW)

INPUT/OUTPUT VOLTS HZ PHASE MOTORFULL LOAD

AMPSSERVICE FACTOR SF HP

IN/OUT PORTS L W H

SHIP WT (LBS)

348045-AQ 3 3.2/2.2 230 50/60 1 TEFC 16 1.32 3.95 2” 23.4” 11” 12.6” 45Operates with identical performance on 50 Hz or 60 Hz input power.

Pentair launched the Sparus Pump with Constant Flow Technology (CFT) with the goal of offering an advanced, aquaculture-duty pump to the global aquaculture industry. Pentair Aquatic Eco-Systems recently collaborated with the research team at the MARC site to conduct a real-world field trial of the Sparus Pump with Constant Flow Technology.

The goal of the collaborative research jointly conducted between Pentair Aquatic Eco-Systems and the MARC site was to examine pump performance and operational costs in an active, operational real- world aquaculture setting.

View the entire case study on our blog. SPARUS WITH CFT COST PER DAY

SPARUS WITH CFT FLOW RATE

Flow Rate

Day of the Month STANDARD 1.5 HP PUMP COST PER DAY

STANDARD 1.5 HP PUMP FLOW RATE

MARC SITE CASE STUDYSavings of $1238.40 per year!


8 PUMPSCENTRIFUGAL HIGH-PERFORMANCE

60HZ

GPM

20

40

60

80

100

120

20 40 60 80 100 120 140 160

Head

(Fee

t)

SPE-4-AQ / SPK-4-AQ

Best Efficiency Sizing

SPET-12-AQ / SPK-12-AQ

SPET-8-AQ / SPK-8-AQ SPET-6-AQ / SPK-6-AQ

SPE-3-AQ / SPK-3-AQ

SPE-2-AQ / SPK-2-AQ

SPARUS™ 160 ENERGY-EFFICIENT AQUACULTURE DUTY 50 & 60HZ CENTRIFUGAL PUMPS FW SW

Pentair Aquatic Eco-Systems Sparus 160 pumps offer extremely high water flow in a quiet, energy-efficient package making them effective in a wide range of Aquaculture applications. Saltwater compatible, corrosion-resistant plastic construction, 316SS stainless steel internal fasteners, oversized anti-blocking strainer basket and volute, and 2-inch female NPT inlet/outlet ports. EPDM/316SS mechanical seal. Compatible with a wide assortment of cleaning and filtration systems. Clear lid for easy inspection. Self-priming, also suitable for flooded suction applications. One-year warranty. UL778 listed. Not certified for use on swimming pools. Optional 3ft 115V, 20 amp power cord, model 79137800-AQ, is compatible with 115V Sparus and Taurus™ Pumps. Includes a NEMA 5-15 three-prong plug and a 1/2” NPT cord-grip-gland with strain relief. UL listed. One-year warranty.

ALL PUMP MODELS:• Single body design provides for quiet/durable operation

• High-temperature thermoplastic withstands harsh conditions and prevents corrosion

• Saltwater compatible construction

• Thermal protection built into single-phase motors

• Easy installation and trouble-free servicing

• Corrosion resistant, high-grade stainless steel motor shaft and internal fasteners

60HZ MODELS:Available for shipment from our North American distribution center.

• 1-phase and 3-Phase models with TEFC motors (except 1/2 - 1HP 1Ph). UL approved.

• TEFC motors are IP55 rated.

50HZ MODELS:Available for shipment from our North American or European distribution centers.

• 1-Phase and 3-Phase models with TEFC Pentair motors. IP55 rated. CE approved

• Unions included for both 50mm and 63mm connections

60HZ MODELS HP VOLTAGE HZ PHASE FL AMPS MOTOR L W H SHIP WTSPE-2-AQ 1/2 115/208-230 60 1 8.8/4.5-4.4 ODP 241/2” 107/8” 123/4” 41SPK-2-AQ 1/2 208-230/460 60 3 3.3-3.6/1.8 TEFC 241/2” 107/8” 123/4” 39SPE-3-AQ 3/4 115/208-230 60 1 11.2/6.0-5.6 ODP 241/2” 107/8” 123/4” 41SPK-3-AQ 3/4 208-230/460 60 3 4.5-4.4/2.2 TEFC 241/2” 107/8” 123/4” 42SPE-4-AQ 1 115/208-230 60 1 14.8/7.8-7.4 ODP 243/4” 107/8” 123/4” 46SPK-4-AQ 1 208-230/460 60 3 4.9-4.5/2.3 TEFC 243/4” 107/8” 123/4” 46SPET-6-AQ 11/2 208-230 60 1 9.6-8.8 TEFC 213/4” 107/8” 123/4” 48SPK-6-AQ 11/2 208-230/460 60 3 6.4-6.3/3.2 TEFC 251/4” 107/8” 123/4” 54SPET-8-AQ 2 208-230 60 1 11.0-10.2 TEFC 221/8” 107/8” 123/4” 52SPK-8-AQ 2 208-230/460 60 3 7.5-7.2/3.6 TEFC 253/4” 107/8” 123/4” 56SPET-12-AQ 3 208-230 60 1 15.0-13.6 TEFC 227/8” 107/8” 123/4” 52SPK-12-AQ 3 208-230/460 60 3 9.8-9.4/4.7 TEFC 253/4” 107/8” 123/4” 5879137800-AQ OPTIONAL 3-FT POWER CORD FOR 115V SPARUS AND TAURUS PUMPS 1

50HZ MODELS HP/KW VOLTAGE HZ PHASE MOTOR L W H SHIP WTP-SPR-071-AQ 0.5/0.55 220-240 50 1 TEFC 211/4” 117/8” 121/2” 32P-SPR-073-AQ 0.5/0.55 380-420 50 3 TEFC 211/4” 117/8” 121/2” 28P-SPR-101-AQ 0.75/0.75 220-240 50 1 TEFC 211/4” 117/8” 121/2” 30P-SPR-103E2-AQ 0.75/0.75 380-420 50 3 TEFC 211/4” 117/8” 121/2” 32P-SPR-151-AQ 1.0/1.10 220-240 50 1 TEFC 22” 117/8” 121/2” 34P-SPR-153E2-AQ 1.0/1.10 380-420 50 3 TEFC 22” 117/8” 121/2” 49P-SPR-201-AQ 1.50/1.50 220-240 50 1 TEFC 22” 117/8” 121/2” 37P-SPR-203E2-AQ 1.50/1.50 380-420 50 3 TEFC 22” 117/8” 121/2” 53P-SPR-301-AQ 2.0/2.20 220-240 50 1 TEFC 231/4” 117/8” 121/2” 51P-SPR-303E2-AQ 2.0/2.20 380-420 50 3 TEFC 231/4” 117/8” 121/2” 67

50HZ Performance

60HZ Performance

50HZ

100

90

30

40

50

60

80

70

20

10

0100

GPM

Hea

d (F

eet)

20 30 40 50 60 70 80 90 100 110 120 130

Best Efficiency Sizing

TAET-8TAET-6TAE-4TAE-3TAE-2


9PUMPSCENTRIFUGAL

60HZ

TAURUS™ 110 ENERGY-EFFICIENT AQUACULTURE DUTY 50 & 60HZ CENTRIFUGAL PUMPSThe Taurus 110 moves more water more efficiently for lower operating cost and super-quiet operation. Plus, by performing with less effort, there’s simply less wear and tear—and that means longer life for a higher return on your pump investment. The Taurus 110 meets all the criteria for a superior pump: super energy efficient, super quiet and super easy to maintain. Plus, it’s designed with innovative materials that will stand up to the most demanding installations and conditions. The Taurus 110 is performance and pressure tested to ensure superior quality. Self-priming for quick, easy start-up. 11/2” x 11/2” NPT port size (11/2” NPT union set included). One-year warranty. UL778 listed. Not certified for use on swimming pools.

Optional 3ft 115V, 20 amp power cord, model 79137800-AQ, is compatible with 115V Sparus and Taurus pumps. Includes a NEMA 5-15 three-prong plug and a 1/2” NPT cord-grip-gland with strain relief. UL listed. One-year warranty.

ALL PUMP MODELS• Minimal energy consumption

• Cam and Ramp™ Lid locks in place with a quarter-turn

• Thermal protection built into single phase motors

• Saltwater compatible construction

• Quiet operation due to superior internal flow design reduces hydraulic noise

• See-through lid permits easy inspection of strainer basket

• Corrosion resistant, high-grade stainless steel motor shaft and parts

60HZ MODELSAvailable for shipment from our North American distribution center.

• 1 Phase models with TEFC Pentair motors

• IP55 rated, UL approved

50HZ MODELSAvailable for shipment from our North American or European distribution centers.

• 1 and 3-Phase models with TEFC Pentair motors

• IP55 rated, CE approved

• Unions included for both 50mm connections

50HZ MODELS HP/KW VOLTAGE HZ PHASE MOTOR L W H SHIP WTP-TRS-051-AQ 0.5/0.37 220-240 50 1 TEFC 21" 12” 11" 30P-TRS-071-AQ 0.5/0.55 220-240 50 1 TEFC 21" 12” 11" 31P-TRS-073-AQ 0.5/0.55 380-420 50 3 TEFC 21" 12” 11" 28P-TRS-101-AQ 0.75/0.75 220-240 50 1 TEFC 23" 12” 11" 32P-TRS-103E2-AQ 0.75/0.75 380-420 50 3 TEFC 21" 12” 11" 31P-TRS-151-AQ 1.0/1.10 220-240 50 1 TEFC 23" 12” 11" 34P-TRS-153E2-AQ 1.0/1.10 380-420 50 3 TEFC 22" 12” 11" 49P-TRS-201-AQ 1.5/1.50 220-240 50 1 TEFC 22" 12” 11" 38P-TRS-203E2-AQ 1.5/1.50 380-420 50 3 TEFC 22" 12” 11" 53P-TRS-301-AQ 2/2.20 220-240 50 1 TEFC 231/8” 12” 11" 51P-TRS-303E2-AQ 2/2.20 380-420 50 3 TEFC 231/8” 12” 11" 66

60HZ MODELS HP VOLTAGE HZ PHASE FL AMPS MOTOR L W H SHIP WTTAE-2-AQ 1/2 115/208-230 60 1 8.8/4.5-4.4 TEFC 25" 107/8” 103/4” 38TAE-3-AQ 3/4 115/208-230 60 1 8.8/4.5-4.4 TEFC 25" 107/8” 103/4” 38TAE-4-AQ 1 115/208-230 60 1 11.2/6.0-5.6 TEFC 25" 107/8” 103/4” 38TAEt-6-AQ 11/2 115/208-230 60 1 9.8-8.6 TEFC 25" 107/8” 103/4” 40TAEt-8-AQ 2 208-230 60 3 11.1-9.5 TEFC 25" 107/8” 103/4” 4879137800-AQ OPTIONAL 3-FT, 115V, 20AMP POWER CORD FOR 115V TAURUS AND SPARUS PUMPS

60HZ Performance

50HZ

m H

20

0

262422201816141210

24

86

m3/hr0 3 6 9 12 15 18 21 24 27 30 33

0.55KW0.75KW

1.1KW1.5KW

2.2KW

50HZ Performance


10 PUMPSCENTRIFUGAL

L3-PLUSLOW HEAD/HIGH FLOW

0

0

10

20

30

40

50

60

70

80

90

100

110

Tota

l Dyn

amic

Hea

d in

Ft o

f H₂O

Volumetric Flow Rate in US Gallons Per Minute20 40 60 80 100 120 140 160 180 200 220 240 260 280 300

H3-5HP

H3-3HP

H3-2HP

L3-160 GPML3-120 GPM

L3-100 GPM

H3-PLUS AND L3-PLUS PERFORMANCE CURVES

H3-PLUS SERIES® & L3-PLUS SERIES® ENERGY EFFICIENT LOW TO MEDIUM HEAD PUMPS FW SW

The new H3-PLUS SERIES and L3-PLUS SERIES were engineered using best-in-class technology. The impeller design delivers a higher level of precision concentricity for increased efficiency. The hydraulic isolator smooths the water flow inside the volute, raising the efficiency even higher. A rugged plastic construction delivers durable pumps at an affordable price. UL778 listed. Not certified for use in swimming pool applications.

The L3-PLUS pump is a low-head/high-flow pump designed for Aquaculture applications that call for large flow rates in low-head conditions. This high-quality pump features a four-pole induction motor that rotates at 1725 rpm when connected to 60hz input power. The relatively slow speed of this motor allows the pump to produce exceptionally high water flow rates; while performing in a highly-efficient manner. These pumps are perfectly suited for ponds, water features, fountains and aquaculture. One-year warranty.

The H3-PLUS pump is a medium-head/high-performance, aquaculture-duty pump designed for maximum up-time and reliable performance. This high-quality pump features an all-weather, ultra-heavy-duty TEFC (totally enclosed fan cooled) motor with an all-aluminum construction and an anodized finish for maximum corrosion resistance. The easy-to-access wiring compartment is located on top of the motor; with optimum accessibility for easy wiring, even in space constrained applications. One-year warranty.

• Freshwater and Saltwater compatible, 316SS internal fasteners, EPDM/Stainless mechanical seal

• Hydraulic isolator separates priming water from pumping water for faster priming, more turbulent-free flow and increased efficiency

• H3-PLUS Models feature Aquaculture-duty, single and three phase TEFC motors with anodized aluminum construction

• Union connectors included for connecting directly to 2.5” or 3” plumbing.

• Diamond seals made of oxidation-resistant, self-retaining EPDM rubber for increased durability and tighter seal

• Extra-large, robust basket with smooth surface for easy debris removal

• Easy-carry handle; easily removable, ergonomic lock ring; and see-through lid for easy basket inspection

• H3 pumps have IP55-rated enclosures for wet locations and harsh conditions

H3- PLUS SERIESMODEL HP VOLTAGE HZ PHASE FL AMPS MOTOR L W H SHIP WTH3-2HPE-AQ 2 208-230 60 1 11.1-9.5 TEFC 25” 113/8” 14” 56.5H3-2HP-AQ 2 208-230/460 60 3 7.5-7.2/3.6 TEFC 25” 113/8” 14” 56.5H3-3HPE-AQ 3 208-230 60 1 14.6-12.6 TEFC 25” 113/8” 14” 61H3-3HP-AQ 3 208-230/460 60 3 9.8-9.4/4.7 TEFC 25” 113/8” 14” 61H3-5HPE-AQ 5 208-230 60 1 20.0-18.8 TEFC 25” 113/8” 14” 67H3-5HP-AQ 5 208-230/460 60 3 13.9-13.1/6.6 TEFC 25” 113/8” 14” 67

L3- PLUS SERIESMODEL NOMINAL GPM VOLTAGE HZ PHASE FL AMPS MOTOR L W H SHIP WTL3- 100- AQ 100 115/230 60 1 8.0/4.0 ODP 261/4” 113/8” 14” 50.5L3- 120- AQ 120 115/230 60 1 8.4/4.2 ODP 261/4” 113/8” 14” 50.5L3- 160- AQ 160 115/230 60 1 9.6/4.8 ODP 261/4” 113/8” 14” 50.5

H3-PLUSMEDIUM HEAD/HIGH PERFORMANCE


11PUMPSCENTRIFUGAL

VERUS™ 850 PREMIUM EFFICIENCY AQUACULTURE DUTY PUMPS FW SW

Pentair Aquatic Eco-Systems Verus 850 pumps are for commercial aquaculture and other heavy-duty water applications. Available in flows to 800 gpm, and from 3 to 15 hp. Verus 850 high-performance commercial pumps are designed for maximum efficiency and quiet operation in every detail. They are noncorrosive, all-plastic and designed exclusively for the commercial aquaculture industry. Stainless steel internals. Saltwater-rated. Verus 850 impellers are manufactured for true breakthrough performance, allowing for lower loads and longer motor life. Strainer pot sold separately. One-year warranty.

FEATURES• Close-coupled for quiet, stable flow operation

• Lightweight for easy installation

• Cam and Ramp™ Clear Lid locking ring design with clear lid for added service convenience

• 6” suction and 4” discharge with strainer pot

• Closed impeller for long life and durability

• Available in single- and three-phase models

• Self-priming with use of strainer pot assembly, sold separately

• UL778 listing (for aquaculture). Not certified for use on swimming pools

• TEFC motors are IP55 rated for wet locations and harsh conditions

60 HZ MODELS HP VOLTAGE HZ PHASE FL AMPS MOTOR SHIP WT (LBS)VRE-20-AQ 5 230 60 1 20.0 ODP 175VREKT-20-AQ 5 208-230/460 60 3 13.5-12.3/6.2 TEFC 102VRE-30-AQ 7.5 230 60 1 30.4 ODP 202VREKT-30-AQ 7.5 208-230/460 60 3 20.4-18.2/9.1 TEFC 122VRE-40-AQ 10 230 60 1 40.0 ODP 154VREKT-40-AQ 10 208-230/460 60 3 27.0-26.2/13.1 TEFC 168VREKT-60-AQ 15 208-230/460 60 3 40.0-38.0/18.8 TEFC 182

50 HZ MODELS* HP VOLTAGE HZ PHASE FL AMPS MOTOR SHIP WT (LBS)VREK5-12-AQ 3 230/400 50 3 7.9/4.5 ODP 131VREK5-20-AQ 5 230/400 50 3 12.3/7.1 ODP 235VREK5-30-AQ 7.5 230/400 50 3 18.1/10.4 ODP 174VREK5-40-AQ 10 230/400 50 3 24.0/13.7 ODP 152*2875 RPM

575V MODELS HP VOLTAGE HZ PHASE FL AMPS MOTOR SHIP WT (LBS)VREC-20-AQ 5 575 60 3 5.1 ODP 83VREC-30-AQ 7.5 575 60 3 7.2 ODP 93VREC-40-AQ 10 575 60 3 10.2 ODP 138VREC-60-AQ 15 575 60 3 15 ODP 138

1750 RPM MODELS HP VOLTAGE HZ PHASE FL AMPS MOTOR SHIP WT (LBS)VREW-12-AQ 3 208-230 60 1 19.5-19.2 ODP 138VREWK-12-AQ 3 208-230/460 60 3 8.4-7.8/3.9 ODP 180VREW-20-AQ 5 208-230 60 1 23.0-20.1 ODP 175VREWK-20-AQ 5 208-230/460 60 3 13.8-13.0/6.5 ODP 145

FLANGE KITS & OPTIONAL STRAINER POT SHIP WT (LBS)VR-STR-AQ OPTIONAL STRAINER POT ASSEMBLY, 6” x 6” 33357262-AQ 4” ANSI FLANGE W/GASKET AND SS HARDWARE —357263-AQ 6” ANSI FLANGE W/GASKET AND SS HARDWARE —357212-AQ 6” ANSI FLANGE W/GASKET AND SS HARDWARE USE ON

VERUS PUMPS NOT EQUIPPED WITH STRAINER POT—


12 PUMPSVERUS PUMP WITH CONSTANT FLOW TECHNOLOGY

Pre-programmed Variable Frequency Drive

Flow meter installed into pipe

Pump wired into drive

Discharge/EffluentFlow meter wired

into drive

Verus Pump

Suction/Influent

Verus Pump with Constant Flow Technology. (Flanges available as optional accessories. PVC pipe not included.)

VERUS™ 850 PREMIUM EFFICIENCY PUMP WITH CONSTANT FLOW TECHNOLOGY™

We know that Variable Frequency Drive (VFD) programming can be challenging, time-consuming and error-prone... That’s why we’ve removed the guesswork; enabling customers to easily upgrade to a proven solution for off-the-shelf control using Constant Flow Technology. The Verus 850 Premium Efficiency Pump with Constant Flow Technology system is available in a range of configurations to suit the needs of various applications. Verus with Constant Flow Technology is offered as a plug-and-play kit consisting of a robust, aquaculture-duty Verus pump; paired with a heavy-duty outdoor-rated (IP55) variable frequency drive. The pump and drive are delivered to you pre-programmed and ready-to-install with an included flow meter for ease-of-installation and minimal setup time. Unlike conventional pumps that require manual valve adjustments, the Verus with Constant Flow Technology is an integrated system that self-adjusts to deliver the user’s established flow rate, even as system conditions change. Optional strainer pot and flanges sold separately.

SYSTEM INCLUDES:• Verus 850 Premium Efficiency Pump

• Saltwater rated, all-plastic construction

• 3 Phase TEFC motor

• Closed-coupled for quiet, stable flow operation

• Lightweight for easy installation

• 6” suction port and 4” discharge port

• Outdoor-rated (IP55) pre-programmed variable frequency drive

• Industrial-grade flow meter

IT’S EASY TO ORDER:1. Choose the Horsepower (5, 71/2, 10 or 15 HP)

2. Select the Voltage (230V or 460V)

3. Select Outlet Pipe Diameter (4” or 6”)

Once you choose the horsepower, voltage and outlet pipe diameter, Pentair Aquatic Eco-Systems will load the proper software into the variable frequency drive to meet your specific requirements. The Verus with Constant Flow Technology System will be shipped pre-programmed and ready-to-install!


13TO

TAL

DYNA

MIC

HEA

D IN

FT

OF H

2O

VOLUMETRIC FLOW RATE IN GPM0 100 250 40050 200 350150 300 450

10

50

30

70

20

60

40

80

90

5HP PUMP PERFORMANCE36003000

1000150020002500

TOTA

L DY

NAM

IC H

EAD

IN F

T OF

H2O

VOLUMETRIC FLOW RATE IN GPM0 300 600200 500100 400 700

10

50

30

70

20

60

40

80

120

110

100

90


1000150020002500

TOTA

L DY

NAM

IC H

EAD

IN F

T OF

H2O

VOLUMETRIC FLOW RATE IN GPM0 100 500300200 400 600

10

50

30

70

20

60

40

80

907.5HP PUMP PERFORMANCE

36003000

1000150020002500

TOTA

L DY

NAM

IC H

EAD

IN F

T OF

H2O

VOLUMETRIC FLOW RATE IN GPM0 200 500 800100 400 700300 600 900

10

50

30

70

20

60

40

80

120

110

100

90


1000150020002500

VERUS™ 850 PREMIUM EFFICIENCY PUMP WITH CONSTANT FLOW TECHNOLOGY™

Performance CurvesA range of speeds are displayed below to demonstrate the potential capacity of the Verus with CFT due to its ability to self adjust to a user-defined flow rate.

MODEL HP VOLTAGE PIPE DIA.VERUSCFT-230-5-4 5 230 4"VERUSCFT-230-5-6 5 230 6"VERUSCFT-460-5-4 5 460 4"VERUSCFT-460-5-6 5 460 6"VERUSCFT-230-10-4 10 230 4"VERUSCFT-230-10-6 10 230 6"VERUSCFT-460-10-4 10 460 4"VERUSCFT-460-10-6 10 460 6"

MODEL HP VOLTAGE PIPE DIA.VERUSCFT-230-7.5-4 71/2 230 4"VERUSCFT-230-7.5-6 71/2 230 6"VERUSCFT-460-7.5-4 71/2 460 4"VERUSCFT-460-7.5-6 71/2 460 6"VERUSCFT-230-15-4 15 230 4"VERUSCFT-230-15-6 15 230 6"VERUSCFT-460-15-4 15 460 4"VERUSCFT-460-15-6 15 460 6"

MODEL OPTIONAL ACCESSORIESVR-STR-AQ OPTIONAL STRAINER POT ASSEMBLY, 6” x 6”357262-AQ 4” ANSI FLANGE W/GASKET AND SS HARDWARE357263-AQ 6” ANSI FLANGE W/GASKET AND SS HARDWARE357212-AQ 6” ANSI FLANGE W/GASKET AND SS HARDWARE USE ON

VERUS PUMPS NOT EQUIPPED WITH STRAINER POT

IN-HOUSE REPAIR AND SERVICE AVAILABLE Contact Pentair Aquatic Eco-Systems for more details.

PUMPSVERUS PUMP WITH CONSTANT FLOW TECHNOLOGY


14 PUMPSCENTRIFUGAL, 15-30HP

VERUS™ PLUS HIGH-EFFICIENCY AQUACULTURE DUTY 15-30HP PUMPS FW SW

Pentair Aquatic Eco-Systems Verus Plus pumps offer breakthrough performance at an unprecedented value. Providing exceptionally-high flow rates for a wide range of applications, Verus Plus pumps operate quietly and efficiently, and they are lightweight for their size; eliminating the need for unwieldy hoists and large installation crews. Sold without pre-filter (strainer pot available separately as an accessory item). 8” ANSI flange suction and discharge ports, 316SS Mechanical seals and 304SS hardware. Robust injection-molded components of glass-reinforced thermoplastic. One-year warranty.

ALL PUMP MODELS• Aquaculture-duty TEFC motor, IP55 rated,Class F Insulation

• IE2 Motor Rating

• Robust injection-molded components made of glass reinforced thermoplastic

• Salt/Seawater approved up to 40 ppt salt concentration

• All pumps are TUV and CE certified

• Suitable for use with Variable Frequency Drives

• 316SS Mechanical seals and 304SS hardware

• 8” ANSI flange suction and discharge ports

60HZ MODELS:• Available for shipment from our North American distribution center

50HZ MODELS: • Available for shipment from our European distribution center

50 HZ MODELS HP VOLTAGE HZ PHASE FULL LOAD AMPS* MOTOR L W H SHIP WT (LBS)VERPL5-60-AQ 15 380/660 50 3 22.5/13.0 TEFC 393/4" 283/8" 291/4" 452VERPL5-80-AQ 20 380/660 50 3 29.8/17.2 TEFC 393/4" 283/8" 291/4" 478VERPL5-100-AQ 25 380/660 50 3 36.5/21.0 TEFC 423/4" 283/8" 291/4" 539VERPL5-120-AQ 30 380/660 50 3 44.5/25.7 TEFC 423/4" 283/8" 291/4" 557

FLANGE KIT & OPTIONAL STRAINER POT SHIP WT (LBS)VERPL5-60-AQ OPTIONAL STRAINER POT ASSEMBLY 66VERPL5-80-AQ 8” ANSI FLANGE ASSEMBLY KIT —

60 HZ MODELS HP VOLTAGE HZ PHASE FULL LOAD AMPS* MOTOR L W H SHIP WT (LBS)VERPL6-60-AQ 15 230/460 60 3 38.8/19.4 TEFC 393/4" 283/8" 291/4" 452VERPL6-80-AQ 20 230/460 60 3 51.4/25.7 TEFC 393/4" 283/8" 291/4" 478VERPL6-100-AQ 25 230/460 60 3 54.4/27.2 TEFC 423/4" 283/8" 291/4" 539VERPL6-120-AQ 30 230/460 60 3 65.8/32.9 TEFC 423/4" 283/8" 291/4" 557*This value may vary slightly depending upon motor manufacturer and motor design type.

00 0

200 400 600 800 1,000 1,200 1,400 1,600 1,800

0 45 91 136 182 227FLOW RATE (m³/hr)

FLOW RATE (GPM)

HEAD

(FEE

T)

HEAD

(m)

273 318 363 409

70 2180 24

60 1850 1540 1230 3020 610 3

60HZ PERFORMANCE CURVES

0 200 400 600 800 1,000 1,200 1,400 1,600 1,800

0 45 91 136 182 227FLOW RATE (m³/hr)

FLOW RATE (GPM)

WIR

E TO

WAT

ER E

FFIC

IENC

Y

WIR

E TO

WAT

ER E

FFIC

IENC

Y

273 318 363 40960 60

50 50

40 40

30 30

20 20

10 10

0 0

60HZ EFFICIENCY CURVES

50HZ EFFICIENCY CURVES

00

10

20

30

40

50

60

70

0

10

20

30

40

50

60

70

200 400 600 800 1,000 1,200 1,400 1,600 1,800 2,000

0 45 91 136 182 227FLOW RATE (m³/hr)

FLOW RATE (GPM)

WIR

E TO

WAT

ER E

FFIC

IENC

Y

WIR

E TO

WAT

ER E

FFIC

IENC

Y

273 318 363 409

50HZ PERFORMANCE CURVES

00 0

200 400 600 800 1,000 1,200 1,400 1,600 1,800 2,000

0 45 91 136 182 227FLOW RATE (m³/hr)

FLOW RATE (GPM)

HEAD

(FEE

T)

HEAD

(m)

273 318 363 409

70 21

80 24

60 1850 1540 1230 3020 610 3

Pump with optional Strainer Pot Pump without optional Strainer Pot


15PUMPSSINGLE STAGE END SUCTION PUMPS

AURORA 340A/360A SERIES FW SW

SINGLE STAGE END SUCTION PUMPS

FEATURES• Capacities to 4,500 gpm (1,022 m/hr)

• Heads to 370 feet (112 m)

• Temperatures to 300°F (149°C)

STANDARD—340A/360A SERIES• Discharge position No.1

• Regreasable bearings (Models 344A, 364A)

• Standard JM motor (Models 341A, 344A)

• Standard JP motor (Models 361A, 364A)

• Coupling guard (Models 344A, 364A)

STANDARD—360A SERIES ONLY• Interchangeable stuffing box

• Graphite impregnated acrylic parking

OPTIONAL—340A/360A SERIES• Standard 340A/360A Series pumps are designed to meet the

requirements of most applications. However to meet special services, a number of optional features have been made available. For services not handled by the features listed, refer to the factory.

• All iron construction

• 316 stainless steel sleeve

• Stainless steel shaft

• Impeller wearing rings

• Oil lubricated ball bearings (Models 344A, 364A)

• Sealed permanently lubricated ball bearings (Models 344A, 364A)

• Alternative discharge positions Nos. 2, 3 and 4

• Fabricated stainless steel drip-rim bases (Models 344A, 364A)

• Formed steel bases (Models 344A, 364A)

• High temperature mechanical seal

• Variety of alternative constructions

OPTIONAL—360A SERIES ONLY• All bronze construction

• Hardened shaft sleeve (for packing)

• Various mechanical seal types

• Water jacketed stuffing box

• Semiopen impellers (Model 364A)

• Double row thrust bearings (Model 364A)

• Packing with lantern ring

CALL FOR DETAILS

EVERYTHING YOU NEED, ON EVERY DEVICE

PENTAIRAES.COM


16 PUMPSPS SERIES IN-LINE STRAINER

PS SERIES™ IN-LINE STRAINER FOR COMMERCIAL PUMPSNew PS Series In-Line Strainers from Pentair Commercial Pool and Aquatics are designed for ease of installation and hydraulic efficiencies in commercial aquatics applications. In three standard sizes and with the addition of eccentric reducers, PS Series strainers fit with almost any plumbing configuration. The design of the PS Series, accommodates the high-flow performance in a variety of applications. ANSI flange bolt pattern allows for ease of installation and peace of mind.

STANDARD FEATURES• Superior design for hydraulic performance.

• Clear lid with easy access allows for simple visibility of debris.

• Extra-large stainless steel strainer basket.

• 50 psi rating.

• NSF listed.

MODEL DESIGNATIONCONNECTION SIZE (INLET X OUTLET)

INLET OUTLETBOLT SIZE NUMBER BOLT SIZE NUMBER

PS6: 6 In. Pipe X 6 In. Pipe No Bolts No BoltsPS6X6 Plastic Flanged 6 In. Ansi X 6 In. Ansi 3/4 In. 8 3/4 In. 8PS6X5E Plastic Flanged Eccentric 6 In. Ansi X 5 In. Ansi 3/4 In. 8 3/4 In. 8PS6X4E Plastic Flanged Eccentric 6 In. Ansi X 4 In. Ansi 3/4 In. 8 5/8 In. 8PS6X3E Plastic Flanged Eccentric 6 In. Ansi X 3 In. Ansi 3/4 In. 8 5/8 In. 4PS#X#E Plastic Flanged Eccentric Various Standard Reducers Various Various

PS8: 8 In. Pipe X 8 In. Pipe No Bolts No BoltsPS8X8 Plastic Flanged 8 In. Ansi X 8 In. Ansi 3/4 In. 8 3/4 In. 8PS8X6E Plastic Flanged Eccentric 8 In. Ansi X 6 In. Ansi 3/4 In. 8 3/4 In. 8PS8X5E Plastic Flanged Eccentric 8 In. Ansi X 5 In. Ansi 3/4 In. 8 3/4 In. 8PS8X4E Plastic Flanged Eccentric 8 In. Ansi X 4 In. Ansi 3/4 In. 8 3/4 In. 8PS#X#E Plastic Flanged Eccentric Various Standard Reducers Various Various

PS10: 10 In. Pipe X 10 In. No Bolts No BoltsPS10X10 Plastic Flanged 10 In. Ansi X 10 In. Ansi 7/8 In. 12 7/8 In. 12PS10X8E Plastic Flanged Eccentric 10 In. Ansi X 8 In. Ansi 7/8 In. 12 3/4 In. 8PS10X6E Plastic Flanged Eccentric 10 In. Ansi X 6 In. Ansi 7/8 In. 12 3/4 In. 8PS10X5E Plastic Flanged Eccentric 10 In. Ansi X 5 In. Ansi 7/8 In. 12 3/4 In. 8PS#X#E Plastic Flanged Eccentric Various Standard Reducers Various VariousNOTE: # designation indicates optional available reducers.

Suffix E denotes Eccentric reducers. Suffix C denotes Concentric reducers. Suffix E will be replaced with C if Concentric reducer is used.

STRAINER SIZE “OD” “A” “B” “C”6 12.8 13.6 25.5 22.88 12.8 13.6 25.5 22.8

10 12.8 20.6 32.5 22.8

NECESSARY HARDWARE

DIMENSIONAL DATA


VALVESPENTAIR VALVES & CONTROLS 17

GATE VALVES

BUTTERFLY VALVES & ACTUATORS

CHECK VALVES

PENTAIR VALVE BRANDS Anderson GreenwoodAvidBiffiCash ValveClarksonCrosby

DewranceFasaniFCTGrinnellGulf ValveHancockHindle

HovapIntervalveKeystoneKTMKunkleL&M ValveLunkenheimer

MCFMonnNarvik-YarwayNeotechaPenberthyPrinceRaimondi I Richards

SapagSempellVarecVanessaVonkWestlockYarway

PENTAIR VALVES & CONTROLSPentair Valves & Controls brings together the world’s premier manufacturers of flow control products. With a portfolio of trusted brands, we offer a level of expertise that is second to none in providing innovative solutions to the most challenging flow control applications.

We are the world’s largest manufacturer of products that move, control and sample liquids, gases, powders and other substances. Our industry-leading brand names include Anderson Greenwood, Biffi, Clarkson, Crosby, FCT, Keystone, KTM, Sempell, Vanessa and Yarway.

With worldwide sales, service and distribution centers, we can be your source for total flow control solutions.

QUALITY PHILOSOPHYA strong commitment to maintaining and improving the quality of both product performance and customer service is behind everything we do. Our factories and quality assurance procedures are inspected and audited regularly by major quality authorities such as Lloyds Register, BSI, Bureau Veritas, ISO and TUV.

GLOBAL SERVICEThe superior performance standards of our valve products are reinforced by the consistent high level of service and experience available to customers locally. With comprehensive sales support and experienced personnel in all major markets, customers can depend on Pentair Valves & Controls.

MAJOR MARKETS AT A GLANCEPentair Valves & Controls supplies products to a variety of industries, including, but not limited to:

• Aerospace

• Automotive

• Chemical and petrochemical

• Food and beverage

• Heating, ventilation and air conditioning water

• LNG

• Marine

• Mining

• Natural gas

• Oil and gas

• Pharmaceutical

• Power generation

• Pulp and paper

• Water and waste


18 VALVESBUTTERFLY

KEYSTONE COMPOSEAL RESILIENT SEATED BUTTERFLY VALVES WAFER STYLEResilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance.

Since the entire valve exists of high engineered composite materials, it is perfectly suited for a wide range of applications such as; building services, hot water applications, industrial waste water and industrial water treatment like purification, ozone or demineralization.

The light weight valve can be perfectly used in transportation and cargo containers and in applications using metal, plastic or glass reinforced pipe lines.

FEATURES• Wafer style body and disc in high engineered composite results

in excellent internal and external chemical resistance.

• Light weight construction results in lower cost and simplified installation.

• No extra pipe support needed when installed in plastic or GRP piping.

• Disc in high engineered composite material provides excellent corrosion resistance.

• All fasteners in stainless steel 316 as standard.

• Bubble tight shut-off in both directions, in accordance with EN 12266-1 leakrate A.

• Pressure range up to PN 16 at elevated temperature.

• Valve can be used in high line velocity applications up to 40 ft/sec.

• Spindle and primary valve seals are not influenced by the flange bolting force or pipe flange type.

• High Cv value.

• No need for flange gaskets.

• Primary stem sealing exceeds the pressure rating of the valve and prevents leakage through the shaft area to atmosphere.

• A secondary (shaft) sealing provides back-up safety.

• Four integrated locating holes ease installation and centering between the pipe flanges.

• Actuator flange acc. ISO 5211.

• Sustainable production philosophy as the valve materials are 100% recyclable.

• Use of composite material eliminates the need for machining and painting.

• Composite hand lever available.

• Available water approvals: KIWA, ACS, WRAS, NSF, BELGAQUA.

• Certified and approved according Det Norske Veritas (DNV).

LEVER HANDLEMODEL MM INCHCSW050442WM1LHE 50 2 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 050 / FIG 419 LEVERCSW065442WM1LHE 65 2.5 WAFER TRIM 442 COMPOSITE/EPDM WA3 DN 065 / FIG 419 LEVERCSW080442WM1LHE 80 3 AFER TRIM 442 COMPOSITE/EPDM WA3 DN 080 / FIG 419 LEVERCSW100442WM1LHE 100 4 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 100 / FIG 419 LEVERCSW125442WM1LHE 125 5 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 125 / FIG 419 LEVERCSW150442WM1LHE 150 6 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN150 / FIG 419 LEVER

GEAR OPERATED - HAND WHEELMODEL MM INCHCSW100442WM1GO 100 4 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 100 / GEAR OP.CSW125442WM1GO 125 5 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 125 / GEAR OP.CSW150442WM1GO 150 6 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 150 / GEAR OP.CSW200442WM1GO 200 8 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN 200 / GEAR OP.CSW250442WM1GO 250 10 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN250 / GEAR OP.CSW300442WM1GO 300 12 WAFER, TRIM 442 COMPOSITE/EPDM WA3 DN300 / GEAR OP.

Lever OperatedGear Operated

Integrated flange sealing.

Thin disc profile resulting in high Cv values.

Secondary body split sealing.

Four body locating holes on all sizes.

Integrated ISO 5211 top plate.

Primary body split sealing.

Spherical disc edge.

Smooth Composite body surface eliminating the need to apply paint.


19TYPE-21 BALL VALVE• Pressure rated up to 230 psi (PVC, CPVC, PVDF)

• Double O-ring seals on stem for added protection

• Full bore, sizes 1/2”–2”

• Full vacuum rated, all sizes

• Blocks in two directions, upstream and downstream, leaving full pressure on the opposite end of the valve

• Integrally molded ISO mounting pad for both manual and actuated operations

• Integrally molded base pad to mount valves securely or panel mounting

• PTFE seats with elastomeric backing cushions ensure bubble-tight shut-off and a low fixed torque, while at the same time compensating for wear

• True Union design for easier installation or repairs without expanding the pipe system

• Built-in spanner wrench on the handle for valve disassembly and assembly

• Two sets of end connectors (socket and threaded) included with all PVC and CPVC valves in sizes 1/2”–2”

• CPVC threaded end connectors on sizes 1/2”–1” come with stainless steel reinforcing rings

• New PTFE Seat design—Facilitates easier field maintenance if required

• Tapered O-ring groove—Helps to Keep the end connector O-rings on the valve body during installation

• Body Flats—Flats have been added to either side of the valve body where a wrench can be applied to prevent the valve body from turning when the Union Nuts are tightened

TYPE 57 BUTTERFLY VALVE• PVC Body and EPDM Seat PVC Disc

• Our 316 stainless steel shaft has full engagement over the entire length of the disc and is a non-wetted part, totally isolated from the media

• Only solid and abrasion-resistant plastic disc and elastomeric liner are wetted parts

• ISO bolt circle on top flange—no body or stem modifications required for accessories

OMNI BALL VALVE• Blocks in two directions

• Rugged structure

• Unibody construction

• Compact, low profile, short face-to-face dimensions

• PTFE seat backed by EPDM for low stem torque

• Rated for full vacuum service

MODEL1605005 1/2” Type-21 BALL VALVE PVC/FKM SOCKET/THREADED COMBO1605007 3/4” Type-21 BALL VALVE PVC/FKM SOCKET/THREADED COMBO1605010 1” Type-21 BALL VALVE PVC/FKMSOCKET/THREADED COMBO1605012 11/4” Type-21 BALL VALVE PVC/FKM SOCKET/THREADED COMBO1605015 11/2” Type-21 BALL VALVE PVC/FKM SOCKET/THREADED COMBO1605020 2” Type-21 BALL VALVE PVC/FKM SOCKET/THREADED COMBO1613015 11/2” Type-21 BALL VALVE CPVC/FKM Sock X Thrd1609020 2” Type-21 BALL VALVE CPVC/EPDM Sock X Thrd1607030 3” Type-21 BALL VALVE PVC/FKM Threaded1607040 4” Type-21 BALL VALVE PVC/FKM Threaded1606030 3” Type-21 BALL VALVE PVC/FKM Socket1606040 4” Type-21 BALL VALVE PVC/FKM Socket

MODEL3722030 3” PVC BODY & DISC EPDM SEALS LEVER-OP TYPE 57 BTRFLY3722040 4” PVC BODY & DISC EPDM SEALS LEVER-OP BTRFLY3722060 6” PVC BODY & DISC EPDM SEALS LEVER-OP BTRFLY

MODEL1070005 1/2” Omni BALL VALVE PVC/EPDM Socket1070007 3/4” Omni BALL VALVE PVC/EPDM Socket1070010 1” Omni BALL VALVE PVC/EPDM Socket1070012 11/4” Omni BALL VALVE PVC/EPDM Socket1070015 11/2” Omni BALL VALVE PVC/EPDM Socket1070020 2” Omni BALL VALVE PVC/EPDM Socket

Asahi/America® is a registered trademark of Asahi/America, Inc.

VALVESBALL/BUTTERFLY


20 MECHANICAL FILTRATIONFILTRATION SYSTEMS

COMMERCIAL FILTRATION SYSTEMS FW SW DESIGNED HERE

BAG, CARTRIDGE, AND SANDPentair Aquatic Eco-Systems CSK filtration systems provide complete filtration and circulation for larger recirculating applications. CSK systems are available in a range of configurations with performance and specifications to suit the needs of many aquatic applications. All systems include pump, filter, UV sterilizer, carbon filter, valves and Schedule 80 PVC pipe. They come assembled, plumbed and pre-mounted on a 40” x 48” plastic skid for drop and go installations (models 930070, 930071 and 930072 utilize two skids). Skids can be easily moved with a forklift or standard pallet jack. Systems ship via motor freight, FOB Orlando. Made in USA. One-year warranty.

APPLICATIONS:• Public aquariums • Multi-tank rack systems

• Retail holding systems • Seafood holding systems

• Research systems • Residential systems

• Aquaculture systems • Koi ponds

PUMPSThese systems are available with pumps that are suitable for single-phase or three-phase electrical supply and offered in 50hz or 60hz electrical ratings, making them suitable for installation nearly anywhere in the world. Standard These systems are supplied with Sparus™ 160 Energy Efficient Aquaculture-Duty Centrifugal Pumps which are suitable for use in fresh and saltwater applications. These pumps offer extremely high water flow in a quiet, energy efficient package. Upgraded CSK systems are equipped with Sparus™ with Constant Flow Technology™ Pumps that deliver a constant user-defined flow rate because the motor speed self-adjusts to maintain the constant flow setting even as conditions change. Note: Flow rate setting not to exceed system designed flow rate.

FILTERSThese systems are supplied with your choice of bag, cartridge or sand filters. These filters have been specifically sized to match the requirements of the system and the flow rate of the pump. For systems with bag filters, the polypropylene bag filter vessel is designed to allow a high flow rate through a single reusable in-line bag filter (filter bags sized from 1 to 800 microns sold separately). For systems with cartridge filters, the cartridge filter housing is constructed of fiberglass-reinforced polypropylene for improved strength and chemical resistance; pleated 20-micron cartridge included (replacement cartridges sold separately). For systems with sand filters, the sand filter housing is constructed of a one-piece, reinforced fiberglass shell for strength and durability (sand filter media sold separately). All systems include carbon filters which remove contaminants and impurities from the water (carbon sold separately).

UV STERILIZERSThese systems feature Pentair Aquatic Eco-Systems commercial-duty UV sterilizers that utilize ultraviolet light to effectively and efficiently inactivate potentially-harmful micro-organisms such as bacteria and algae. These UV units feature high-output (HO) T6-style lamps for a higher wattage in a shorter lamp. The UV dose is sized to be over 30,000 µW/cm2 at full system flow. Replacement lamps sold separately.

PLUMBINGSystems are plumbed with Schedule 80 PVC pipe. All valves are true union Asahi ball or 3-way valves plumbed throughout the system for easy service and disassembly. All filters and UV sterilizers have bypass lines to facilitate filter or lamp replacement.

CALL OUR TECH SUPPORT FOR SIZING ASSISTANCE

SPARUS W/CFT230V 50/60HZ 1PH TEFC

SPARUS 60HZ 1PH115/208-230V TEFC

SPARUS 60HZ 3PH208-230/460V TEFC

SPARUS 50HZ 1PH220-240V TEFC

SPARUS 50HZ 3PH380-420V TEFC

CFS FILTRATION SYSTEMS MODEL MODEL MODEL MODEL MODEL30GPM, BAG FILTER 930019 930020 930021 930022 93002330GPM, CARTRIDGE FILTER 930024 930025 930026 930027 93002830GPM, SAND FILTE 930029 930030 930031 930032 93003345GPM, BAG FILTER 930034 930035 930036 930037 93003845GPM, CARTRIDGE FILTER 930039 930040 930041 930042 93004345GPM, SAND FILTER 930044 930045 930046 930047 93004860GPM, BAG FILTER 930049 930050 930051 930052 93005360GPM, CARTRIDGE FILTER 930054 930055 930056 930057 93005860GPM, SAND FILTER 930059 930060 930061 930062 930063100GPM, BAG FILTER 930064 930065* 930066 — —100GPM, CARTRIDGE FILTER 930067 930068* 930069 — —100GPM, SAND FILTER 930070 930071* 930072 — —*208-230V 60HZ 1PH TEFC.

930054 - 60 GPM Cartridge Filter System930019 - 30 GPM Bag Filter System 930070 - 100 GPM Sand Filter System


21MECHANICAL FILTRATIONARIAS 4000/ARIAS 6000/ARIAS 8000

ARIAS™ SAND FILTERSTHERMOPLASTIC SAND FILTER WITH MULTIPORT VALVEThe Pentair Aquatic Eco-Systems Arias Top Mount Filters are the perfect high performance sand filters. They’re incredibly simple to operate and maintain, and they’re built with long-term reliability in mind. Plus, their highly efficient design provides all the filtration your system requires, year after year.

Sand filters are one of the most popular and cheap ways to filter water, and for good reason. They are simple, effective and require very little attention. Water is routed through a sand-filled pressure vessel. In this method, impurities are extracted from the water using sand to collect and attract the debris as small as 20 to 40 microns. Over time, dirt accumulates in the spaces between the sand particles causing the pressure in the vessel to rise as water finds it harder to pass through. This signals you to “backwash” the filter. Simply reverse the water flow and “knock out” the dirt.

The top-mount, 6-function 11/2” multiport valve of the Arias puts all filter functions right at your fingertips—just rotate the handle to the desired position and the Arias does the rest for sure and simple operation. Features a pressure gauge and manual air relief for optimum filtration efficiency. Its internal design ensures that water is exposed to maximum sand surface area for superior filtration performance and efficient backwashing.

FEATURES:• One-piece thermoplastic tank for exceptional

strength, corrosion resistance and long life

• Combination water and sand drain makes servicing fast and easy

• Special internal design maintains sand bed level for consistent performance and extended time between cleaning cycles

A4000-40-AQ

OPTIONAL VALVEMODELSMV2 MULTIPORT VALVE, 2” FNPT ON THE VALVE ITSELF, SIDE MOUNTED

MODEL

EFFECTIVE FILTRATION AREA (FT2)

FLOWRATE (GPM)1

MAX PRESSURE (PSI)

PEA GRAVEL REQUIRED (LBS)

SAND REQUIRED (LBS)

FILTER MEDIA ALL SAND REQUIRED (LBS) A. DIM. B. DIM.

DIMEN-SIONS C.

DIM. D. DIM. E. DIM. SHIP WT (LBS)A8000-100-AQ 4.91 98 50 150 450 600 39.75” 30.5” 16.50” 43.75” 7.5” 70A8000-140-AQ 7.06 141 50 275 650 925 45.25” 36.5” 18.75” 49.25 7.5” 821Based on 20 gpm per ft2.

10 YEAR TANK WARRANTY

MODEL

EFFECTIVE FILTRATION AREA (FT2)

MAX PRESSURE

(PSI)FLOWRATE

(GPM)

ALL SAND REQUIRED

(LBS) A. DIM.DIMENSIONS

B. DIM. C. DIM. SHIP WT (LBS)A4000-35-AQ 1.4 30 35 100 37” 33.5” 16.5” 22A4000-40-AQ 1.8 35 40 150 46.25” 37.75” 19.5” 24A4000-60-AQ 2.3 40 60 250 52.5” 43.75” 22.5” 28A4000-70-AQ 3.15 50 70 300 57” 46.25” 24” 58A4000-80-AQ* 3.5 50 75 350 65.75” 48.75” 26” 76A6000-40-AQ** 1.8 50 40 175 47” 37” 19.5” 30A6000-60-AQ** 3.1 50 60 325 57” 42.5” 24.5” 38A6000-100-AQ** 4.9 50 100 600 65.5” 47.25” 30.5” 78* With 2” valve. **Note: Operating limits—maximum continual operating pressure of pressure of 50 psi. Maximum operating water temperature (internal filter) is 104° F (40° C).

ARIAS™ 8000 SAND FILTERSFIBERGLASS SAND FILTER W/O VALVESThe Pentair Aquatic Eco-Systems Arias 8000 sand filters feature a process that creates a one-piece, reinforced fiberglass shell with a UV-resistant surface finish. Compatible multi-port valve available separately, refer below to part number SMV2. If you don’t purchase a valve, then you will need to purchase a set of fittings listed below. 10-year tank warranty, one-year standard warranty. Ships via motor freight. Made in USA.

Filter, Valve, and Fittings Sold Separately


22 MECHANICAL FILTRATIONSTARK AQ SERIES FILTERS/STARK V SERIES FILTERS

STARK™ AQ SERIES™ FILTERSLARGE DIAMETER SYSTEMS AND VESSELS48” and 60” Diameter Stackable Horizontal Filters are available as complete filtration systems. The Stark AQ Series Filters are ideal for high-load or large flows of water, such as water parks and public aquariums. NSF-50 Listed. 75 psi pressure rating.

FEATURED HIGHLIGHTSAlso available in complete systems using either our proprietary diaphragm valves or linked butterfly valves.

STARK V SERIES™ FILTERSHIGH LOAD VERTICAL FILTERSDeep-Bed Filters provide “plug-flow” for extreme load applications such as sea-water intake, mammal and marine mammal exhibits. They are also frequently used as carbon (GAC) filters.

Stark AQ Series Sand Filter

AQ SERIES VESSEL SIZING AND CAPACITY INFORMATION

MODEL Styles D X H (INCHES) MEDIA MAX. (FT3) FLOWRATE (GPM)REQ’D AIR FLOW

(CFM)4X6 A, B, C 22 4.0 6.0 6”4X8 A, B, C 30 4.0 8.0 6”4X10 A, B, C 38 4.0 10.0 6”4X12 A, B, C 46 4.0 12.0 8”4X14 A, B, C 54 4.0 14.0 8”5X8 A, B, C 37 5.0 8.0 8”5X10 A, B, C 47 5.0 10.0 8”5X12 A, B, C 57 5.0 12.0 8”5X14 A, B, C 67 5.0 14.0 8”5X16 A, B, C 77 5.0 16.0 8”* Styles B and C are stackable. All are available with the manway on the other side (reverse manway).

V SERIES VESSEL SIZING AND CAPACITY INFORMATION

MODEL Available Styles* D X H (INCHES) MEDIA MAX. (FT3) FLOWRATE (GPM)REQ’D AIR FLOW

(CFM)V3672 Vertical 7.1 3.0 6.0 3”V4272 Vertical 9.6 3.5 6.0 3”V4872 Vertical 12.6 4.0 6.0 4”V6072 Vertical 19.6 5.0 6.0 6”V72 Vertical 28.3 6.0 8.8 6”V96 Vertical 50.3 8.0 9.5 6”


23MECHANICAL FILTRATIONVESSEL FEATURES

STARK TANKS ARE CORROSION PROOFStark fiberglass filters are designed to have a life span three-to-five-times longer than metal filters. Each Stark filter tank is manufactured under the strictest quality-control procedures. The integral composite fiberglass construction eliminates welds or seams that can leak, blow out, or rupture from vacuum damage.

All NSF-50 listed Stark Horizontal filters are designed for 75 or 100 psi working pressure, and 400 psi burst test, to meet multiple budgets and specs. Each tank is pressure tested prior to shipment. And the tank is completely impervious to corrosion.

Stark’s 100 percent corrosion-resistant fiberglass filters provide the perfect solution: dependable performance with ease of operation.

TANK WINDING

OPTIONAL INTEGRAL INSULATIONAny Stark Filter can be manufactured with integral insulation between the shell and winding layers to last as long as the vessel. Used for both cold water and warm water life support applications when filters are installed where a high differential exists between water and ambient air temperature.

COMMERCIAL LATERAL2” NPT injection molded ABS with “V” groove slots and reinforcing ribs for best performance and service life.

MANWAY VIEWPORTProvides Visual Observation of the sand bed during Filtration and Backwash. Standard on all Stark vessels. Manway opening is 12” X 16” elliptical for easy access.

VALVESCost-effective backwash control valve have manual or automatic options. 6” version (on most models) includes a transparent ABS valve housing and cover to display valve positioning and provide convenient maintenance inspections.

OPTIONAL PRESSURE BOOSTER SYSTEM (PBS01)Provides consistent valve-actuation where city-water pressure is unreliable.

STARK FILTRATIONADDITIONAL FEATURES AND OPTIONS


24 MECHANICAL FILTRATIONCARTRIDGE/CARBON

SEDNA™ 1000 CARTRIDGE FILTERSFiberglass-reinforced cartridge filterGet top-end filter performance with low maintenance! The single-piece base/tank is constructed of fiberglass-reinforced polypropylene for improved strength and chemical resistance. The manual air relief valve and continuous internal air relief work together to maintain optimum filtration efficiency at all times. The unit's innovative clamp ring design makes it easy to remove and rinse thecartridge, and the cartridge's surface is designed to block and trap as many solids as possible. 11/2" drain and washout allow quick and convenient maintenance, and 2" plumbing provides maximum flow. One-year limited warranty.

CHEMICAL BASKET FILTERSLarge chemical media filters perfect for use in small recirculating systems, seafood holding systems and zoological exhibits. Use them with carbon, zeolite, biofilter media, etc. Glass-filled thermoplastic units are compatible with fresh and salt water. The shape of the tank provides a high surface area and an ideal flow pattern through the media.

Lock ring and 11/2” drain and washout allow quick and convenient access to basket to change media out, and 2” plumbing provides maximum flow. Includes air bleed and pressure gauge. Bases of units are 11” in diameter; 16” long from inlet to end of outlet.

Capacities listed below are based on dry weight using ProLine® Activated Carbon.

MODEL EFFECTIVE FILTRATION AREA (FT2) FLOWRATE (GPM) A. DIM. B. DIM. SHIP WT (LBS)S1000-50-AQ 50 19–50 18” 30” 15S1000-75-AQ 75 28–75 25.5” 39” 26S1000-100-AQ 100 38–100 33” 61” 33S1000-150-AQ 150 56–150 40.5” 76” 35S1000-200-AQ 200 75–200 40.5” 76” 35S1000-50C-AQ 20 MICRON REPL. CARTRIDGE FOR S1000-50-AQ 3S1000-75C-AQ 20 MICRON REPL. CARTRIDGE FOR S1000-75-AQ 5S1000-100C-AQ 20 MICRON REPL. CARTRIDGE FOR S1000-100-AQ 7S1000-150C-AQ 20 MICRON REPL. CARTRIDGE FOR S1000-150-AQ 10S1000-200C-AQ 20 MICRON REPL. CARTRIDGE FOR S1000-200-AQ 12Note: In 2015, these filters are migrating to black. Color may vary.

MODEL VERTICAL CLEARANCE GPM CAPACITY HEIGHTFCB200H 76” 75 26 LBS 40.5”FCB50H 30” 19 8 LBS 18”FCB75H 39” 28 12 LBS 25.5”FCB100H 61” 38 17.5 LBS 33”

S1000-100-AQ S1000-75-AQ S1000-50-AQ

20 MICRON REPLACEMENT

CARTRIDGE


25MECHANICAL FILTRATIONCARBON FILTERS

950002 - 70 GPMCarbon Filter

950003 - 125 GPMCarbon Filter

MODEL MAXIMUM FLOW (GPM) MEDIA CAPACITY (FT3/M3) INLET OUTLETTANK SIZE OVERALL DIMENSIONS

DIA. HEIGHT L W H950001 30 7.0/0.2 2” 2” 24” 72” 45” 35” 98”950002 70 17.6/0.5 2” 2” 36” 72” 59” 40” 99”950003 125 31.8/0.9 3” 3” 48” 72” 77” 54” 116”

COMMERCIAL CARBON FILTERS FW SW DESIGNED HERE

Pentair Aquatic Eco-Systems Sweetwater® Commercial Carbon Filters utilize beds of pure activated carbon to remove contaminants and impurities from water. These carbon filters are available in three tank sizes to allow for max flow rates ranging from 30 GPM to 125 GPM. The carbon filter can be applied to influent and effluent water treatment. Removal uses: chlorine, chloramine, organics, low molecular, volatile organics. Size is determined by flow, contaminant concentration, and time between carbon exchange. Carbon filter media sold separately, see page 131 for Proline® Activated Carbon, AC55. Ships Ground. One-year warranty.

DESIGN FEATURES• Fiberglass-reinforced plastic filter tank created with an exclusive

manufacturing process that creates a seamless shell sealed with epoxy resin which is light weight and ideal for corrosive environments

• Designed with freshwater and saltwater compatible components

• Powder coated 316 Stainless Steel frame provides plumbing support

• Plumbed with gray PVC Schedule 80 pipe for heavy duty applications

• Ashcroft 4” stainless steel panel mounted differential pressure gauge, 0-160 PSI, for monitoring of inlet and outlet pressure

• Keystone Composeal Butterfly valves provide excellent corrosion resistance, bubble tight shutoff and convenient, simple operation during backwash

CALL OUR TECH SUPPORT FOR SIZING ASSISTANCE

CONNECT WITH US!

twitter.com/PentairAES linkedin.com/company/aquatic-eco-systems-inc pinterest.com/PentairAES

youtube.com/AquaticEcoTVinstagram.com/PentairAESfacebook.com/PentairAES


26 MECHANICAL FILTRATIONBEAD FILTERS

MODEL INLET/OUTLETMAXIMUM SYSTEM SIZE

GAL/LITERSFISH SUPPORTED

(LBS)DIMENSIONS RECOMMENDED FLOW RATE

(GPM)BEAD MEDIA CAPACITY DIAMETER HEIGHT930080 2” / 11/2” 4,000/15,142 75 1.65 FT3 19” 38” 40–60930081 2” 8,000/30,283 165 3.30 FT3 22” 44” 75–100930082 2” 12,000/45,425 330 4.95 FT3 26” 49” 90–120930083 2” 24,000/90,850 660 9.90 FT3 36” 52” 100–140AB1 REPLACEMENT FILTER BEAD MEDIA, 1.65 FT3, 55 LBS.Note: Model 930080 will ship with 2” x 11/2” reducer bushings as option for 11/2” plumbing installation.

BEAD FILTERSPentair Aquatic Eco-Systems Sweetwater® Bead Filters are specifically engineered to host a multitude of aquatic inhabitants in both fresh and salt water. These filters are designed to provide both mechanical and biological filtration for your mature koi pond. If separate mechanical filtration is provided upstream of your bead filter, pond size and fish capacity can as much as double when the bead filter is used for biological filtration only. Pond volume and fish load capacity numbers are nominal and sizing requirements should be determined by daily feed rate.

These filters offer high efficiency, low maintenance, mechanical and biological filtration in one package with up to 4500 ft2 of biological contact surface area in a small footprint. Applications include ponds, public aquariums, zoos, hatcheries, research facilities, academics, aquaponics, quarantine and environmental biological recovery systems. The blower aggressively agitates the debris collected in the media bed and suspends it in the water column which is easily backwashed to waste. These tanks, rated at maximum 50 PSI, are molded from extra-thick polyethylene, with the very largest vessel built out of heavy-duty fiberglass. They feature a sight glass to visually monitor the clarity of water returning to your pond as well as a clear pipe to monitor waste discharge during the backwash cycle to make sure the bead filter media is cleaning properly.

Bead filters include control valve and filtration vessel mounted on a rigid plastic base, with a 115V 60 Hz blower, 2” union connections, and filter bead media. Ships Ground. One-year warranty.

• Innovative flow control protects against friction loss by eliminating unnecessary flow restrictions inside the system allowing greater water flow

• Both an excellent mechanical and biological filter

• Clear sight glasses allow you to monitor filtered effluent and waste discharge streams

• Bottom mounted sludge drain discharges heavy solids without media interference

• Bypass function isolates beneficial bacteria and media without disturbing normal water flow. Ideal for medicating the aquatic environment without killing the beneficial bacteria.

• High-output blower fluidizes and pre-washes media prior to backwash, reducing the amount of water needed to clean the system, which increases biological efficiency.

930081

930083


27BIOLOGICAL FILTRATIONLOW-SPACE BIOREACTOR

SWEETWATER® LOW-SPACE BIOREACTOR FILTERFULLY AUTOMATIC, SELF-ADJUSTING AND CONTINUOUSLY SELF-CLEANINGThis is a robust, nonpressurized biofilter that is much less sensitive to flow rate variations and power interruptions than fluidized bed sand biofilters. When operated in low-head recirculating systems, it can easily be sunk into the floor to reduce the pump pressure. When installed this way, only a few inches of head loss will occur across the LSB. Because air is used to circulate the media, the LSB both adds oxygen and strips carbon dioxide! A hood can be placed over the bioreactor to vent the CO2 outdoors. We have colored them blue/green to prevent algae growth inside and provide the dark environment preferred by the Nitrobacter bacteria.

Air diffuser depth can be adjusted for compatibility with your blower/compressor. LSBs are complete with media. Compressed air connections are 1/2” slip. Air pump not included. All you need are male-threaded pipe connections. We can also custom build larger sizes. Ship motor freight.• Up to 12 kg feed/m3 media (35.3 ft3)

• Non-pressurized, gravity drain

• Low head

• CO2 stripping

PACKS A HUGE AMOUNT OF USABLE SURFACE INTO A SMALL VOLUME.

Media With No Flow Media With Water Flow Media In Bioreactor BF150A

MODEL TANK VOL (GAL) D X H (INCHES) MEDIA MAX. (FT3) FLOWRATE (GPM)REQ’D AIR FLOW

(CFM) IN/OUT (INCHES) AES/B* FEED (LBS/DAY) SHIP WT (LBS)LSB2.5 35 18 X 33 2.5 3–9 1 1.25 119 1.5–3 40LSB3 40 18 X 36 3 3–10 1 1.25 142 2-4 55LSB5 70 23 X 43 5 7–20 1.5 2 236 3–6 140LSB7 94 21.5 X 62 7 10–30 2 3 339 4–9 170LSB8 105 31 X 37 8 10–30 2 3 376 5–10 175LSB12 170 31 X 57 12 17–50 3 3 576 7–15 280LSB25 323 47 X 50 25 25–90 4.5 4 1,173 15–30 380LSB35-2 480 47 X 71 35 40–200 4.5 6 1,730 20–45 535BF150A BIO-MEDIA, 1 FT3 10*AES/B Number is a conservative amount of fish (lbs) supported.


28 MECHANICAL FILTRATIONDRUM FILTERS

PR AQUA ROTOFILTER DRUM FILTERRotary microscreen drum filters are ideal for the removal of fine suspended solids in recirculating systems where water reuse strategies are imperative— aquaculture systems, zoos, aquariums, greenhouses, wastewater treatment plants, and more. PR Aqua Rotofilters are trusted by facilities worldwide for critical filtration needs. Constructed of the highest-quality materials and engineered for the rigors of commercial aquaculture, PR Aqua Rotofilters provide exceptional reliability and a long service life. Designed with the needs of the commercial operator in mind, the filters are also inexpensive to operate. Rotofilters are available in two configurations; fully-enclosed or frame-mounted. With flow rate capacities from 50 to 7,000 gpm (11 to 1590 M3/HR) and micron ratings from 11–80 (custom sizes available upon request) there is sure to be a Rotofilter that meets the requirements of your application.

BENEFITS• Manufactured in North America with factory-direct service and

spare parts.

• Removes excess feed, and other organic matter.

• Continuous filtering, even during backwashing.

• Low head gravity fed operation

• Very low operating cost and minimal backwash water consumption.

• Superior screen design for long service life.

FEATURES• Fiberglass enclosure or stainless steel frame mount, stainless steel

internals, and high-quality industrial drive components.

• Injection molded, one-piece screen eliminates the potential for screen delamination and allows for plugging of small holes without downtime.

• Inlet seal maintains a continuous positive seat against the rotating drum.

• Appropriate for corrosive environments. Metals passivated for saltwater applications.

DESCRIPTION OF OPERATIONUntreated water is gravity fed or pumped into the drum, which has fine screens mounted to its periphery. Water flows through the screens while the solids adhere to the screen surface. The filtered water passes over a level control weir and then out of the filter by the use of gravity. As particles attach to the screen surface, the water level inside the drum rises. The rising water activates the automatic drum rotation and backwash system. A pressurized spray is used to clean the solids from the screen into an inclined trough. The solids flow by gravity from the filter for disposal or recovery. The cleaned screens are rotated into the water, lowering the water level. The backwash system shuts down automatically to save power and water.

FOR MORE INFORMATION INCLUDING PERFORMANCE CHARTS PLEASE VISIT PENTIARAES.COM/praquaFilter sizing varies depending on the application. Please contact a PAES Representative for proper filter selection.

Spray Water In

Biosolids Out

Water In

Filtered Water Out

Filtered Water Passes Through Screens into Filter Housing

Injection Molded Screens Backwash Spray Nozzles


29MECHANICAL FILTRATIONDRUM FILTERS

Filter Frame

Drum Assembly

Spraybar

Spraybar Nozzles(lid panel removed to show detail)

Solids Outlet(optional flanged)

Inlet (optional flanged)

Removable Lid Assembly Motor

Motor Cover Assembly

Drive Shaft

Sludge Trough

Water LevelControl Weir (optional)

Outlet

Filter Enclosure

Drum Assembly (screens removed for clarity)

Spraybar

Spraybar Nozzles (lid panel removed to show detail)

Solids Outlet

Inlet

Removable Lid Assembly

Motor

Motor Cover Assembly

Sludge Trough

RFM MODEL—STAINLESS STEEL DRUM FULLY-ENCLOSED IN A FIBERGLASS HOUSINGFEATURES• Fiberglass enclosure, stainless steel internals, and high quality

industrial drive components.

• Built-in overflow and water level control weir for easy process integration.

• Injection molded, polypropylene screen panels eliminate screen delamination.


• Independent screen cells can be plugged with zero down-time.

RFF MODEL—FRAME CONFIGURATION MOUNTED ON A STEEL FRAME, TYPICALLY INSTALLED IN A WET SUMPFEATURES• Frame mounted for flexible integration into a variety of

sump arrangements.

• Stainless steel construction and high quality industrial drive components.

• Injection molded, polypropylene screen panels eliminate screen delamination.


• Independent screen cells can be plugged with zero down-time.

• Inlet and level control options available.

FILTER DATAFlow Range 50 To 7,000 US gpmElectrical Supply Various options availableScreen Size (Micron) 11, 21, 30, 37, 54, And 80Number Of Screen Panels 2 To 50Minimum Drum Submergence

40%

Rotation Counterclockwise or clockwise (option)Weight Dry/Wet 190 To 1,600/435 To 12,200 lbs

MATERIALS OF CONSTRUCTIONDrum Frame 304 or 316 SSDrum Shaft 316 SsFilter Enclosure Fiberglass reinforced plastic or

stainless steel frameSectional Lid Marine grade aluminum or FRPScreen Panels Injection molded polyester fabric embedded in

polypropylene gridsDrum Seal Synthetic elastomer seal wear ring

PLUMBINGInlet Size 4” To 24”Inlet Type SOC or flange (RFM)

Open drum or flange (RFF)Outlet Size 4” To 24”Outlet Type SOC or flange (RFM)

Discharges directly into sump or level control basin (RFF)

Solids Outlet 4” SS pipe

CONTROL PANELEnclosure NEMA 4XBackwash Control Manual and automatic control

(by timer and level control switch)Dry Contacts Run, trouble, and high level

BACKWASH SYSTEMSupply Operates at 100 psi—booster pump available

RFM Model Rotofilter

RFF Model Rotofilter


30 SPECIALTY FILTRATIONCLP SERIES UV SYSTEMS

SAFEGUARD UV SYSTEMS® CLP SERIESCOMMERCIAL L-VESSEL POLYMERCLP Series SafeGUARD UV Systems offers an optimized and efficient internal hydraulic and optical design, ensuring that your system always provides the performance required. The optical design matches the UV-C light intensity distribution throughout the treatment chamber to the specific flow patterns of that chamber, ensuring reliable fluence (UV dose) delivery. CLP models feature Schedule-80 Modified Polymer construction**, ideally suited for corrosive and saltwater conditions. CLP vessels are extremely durable and deliver a cost savings of up to 50% when compared to more expensive and corrosion-prone 316 stainless steel. Vessels can be mounted horizontally or vertically.

CLP Series SafeGUARD UV Systems feature single-end UV lamp and Quartz Sleeve assembly, They use a remote NEMA Type 12 thermoplastic Control Panel/Power Supply enclosure and is available with Basic or optional PLC (shown) control packages with either LPHO or Amalgam UV lamps Power Supply Enclosures are UL 508a listed. NSF 50 Certified.

SYSTEM FEATURES• State-of-the-art electronic ballast matched precisely to the lamp’s power requirement to ensure

optimal UV-C output and maximized lamp life

• Schedule-80 Modified Polymer* construction is stronger and can typically handle higher internal pressures than polypropylene and HDPE vessels

• Single-end UV lamp and quartz sleeve access for easy servicing

• Watertight design protects all electrical hardware from water damage

• Highest-Quality American-Made UV-C lamps offer 12,000 hours of continuous operation** at or above the minimum required UV-C intensity levels required to meet your dose target

• Power supplies are 120v or 230v and are 50/60 Hz compatible

• Reduces microorganisms through ultraviolet light.

EPA Est. No.: 091668-FL-001

*Limited 3 Year Warranty**Limited 12,000 hr warranty on all lamps

CLP LOW-PRESSURE AMALGAM UV SYSTEMS

MODELLAMPS/WATTS INPUT WATTS

UV-C OUTPUT WATTS

UV VESSEL DIMENSIONS (L X D)

POWER ENCLOSURE DIMENSIONS (H X W X D)

AVAILABLE INLET/OUTLET PORT(S)

(FLANGE)AMPS MAX LOAD @ 120/230 VAC MAX PSI/BAR

30 MJ/CM2 GPM/LPM

180 MJ/CM2 GPM/LPM

CLP4130A6-xFB 1/130 130 40 56” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 2.1/1.0 150/10.3 66/255 11/42CLP4260A6-xFB 2/130 260 80 56” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 3.9/2.0 150/10.3 112/434 18/72CLP4390A6-xFB 3/130 390 120 56” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 5.8/2.9 150/10.3 161/624 27/104CLP4390A8-xFB 3/130 390 120 62” x 8” 16” x 14” x 8.4” 3”, 4” 6” 5.8/2.9 150/10.3 228/883 38/147CLP4520A8-xFB 4/130 520 160 62” x 8” 20.2” x 16.3” x 8.4” 3”, 4” 6” 7.5/3.7 150/10.3 296/1,147 49/191CLP4650A8-xFB 5/130 650 200 62” x 8” 24.6” x 20.2” x 10.6” 3”, 4” 6” 9.4/4.7 150/10.3 346/1,341 58/223CLP4780A10-xFB 6/130 780 240 64” x 10” 24.6” x 20.2” x 10.6” 4”, 6”, 8” 11.2/5.6 120/8.3 480/1,860 80/310CLP4910A10-xFB 7/130 910 280 64” x 10” 24.6” x 20.2” x 10.6” 4”, 6”, 8” 13.3/6.5 120/8.3 564/2,185 94/364CLP4910A12-xFB 7/130 910 280 69” x 12” 24.6” x 20.2” x 10.6” 6”, 8” 13.3/6.5 90/6.2 648/2,511 108/418CLP41040A12-xFB 8/130 1,040 320 69” x 12” 30.5” x 24.1” x 12.6” 6”, 8” 15.0/7.5 90/6.2 763/2,956 127/493CLP6320A6-xFB 1/320 320 98 85” x 6” 24.6” x 20.2” x 10.6” 2”, 3”, 4” 3.2/1.6 150/10.3 165/639 27/106CLP6640A6-xFB 2/320 640 196 85” x 6” 24.6” x 20.2” x 10.6” 2”, 3”, 4” 6.0/3.0 150/10.3 276/1,070 46/178CLP6960A6-xFB 3/320 960 294 85” x 6” 24.6” x 20.2” x 10.6” 2”, 3”, 4” 9.0/4.5 150/10.3 392/1,519 65/253CLP6960A8-xFB 3/320 960 294 86” x 8” 24.6” x 20.2” x 10.6” 3”, 4” 6” 9.0/4.5 150/10.3 587/2,275 98/379CLP61280A8-xFB 4/320 1,280 392 86” x 8” 24.6” x 20.2” x 10.6” 3”, 4” 6” 12.0/6.0 150/10.3 744/2,883 124/480CLP61600A8-xFB 5/320 1,600 490 86” x 8” 24.6” x 20.2” x 10.6” 3”, 4” 6” 15.0/7.5 150/10.3 848/3,286 141/548CLP61920A10-xFB 6/320 1,920 588 88” x 10” 30.5” x 24.1” x 12.6” 4”, 6”, 8” 18.0/9.0 120/8.3 1,198/4,642 200/773CLP62240A10-xFB 7/320 2,240 686 88” x 10” 30.5” x 24.1” x 12.6” 4”, 6”, 8” 11 Amps*** 120/8.3 1,405/5,442 234/907CLP62240A12-xFB 7/320 2,240 686 90” x 12” 30.5” x 24.1” x 12.6” 6”, 8” 11 Amps*** 90/6.2 1,611/6,243 268/1,040CLP62560A12-xFB 8/320 2,560 784 90” x 12” 30.5” x 24.1” x 12.6” 6”, 8” 13 Amps*** 90/6.2 1,839/7,126 306/1,188CLP62880A14-xFB 9/320 2,880 882 92” x 14” 30.5” x 24.1” x 12.6” 8”, 10”, 12” 14 Amps*** 50/3.4 2,183/8,461 364/1,410CLP63200A16-xFB 10/320 3,200 980 94” x 16” 30.5” x 24.1” x 12.6” 10”, 12”, 14” 16 Amps*** 50/3.4 2,544/9,858 424/1,64320218 UV Vessel OVer-temp protection (recommended for plastic vessels)20218-EXTCABLE 12’ extension cable for over-temp protection sensor (works with basic control option)When ordering: Replace ‘x’ in part number with requested flange size; e.g., ‘2’ for two-inch flange. Basic or Optional PLC Control Package available. ***230 VAC.


UV-C OUTPUT WATTS

UV VESSEL DIMENSIONS

(L X D)


(x) INLET/OUTLET

PORT(S) (FLANGE)AMPS MAX LOAD @ 120/230 VAC MAX PSI/BAR

30 MJ/CM2 GPM/LPM

180 MJ/CM2 GPM/LPM

CLP4160HO6-xFB 2/80 160 54 56” x 6” 14” x 12” x 8.4” 2”, 3”, 4” 3.0/1.5 150/10.3 81/314 13/52CLP4240HO6-xFB 3/80 240 81 56” x 6” 14” x 12” x 8.4” 2”, 3”, 4” 4.0/2.0 150/10.3 119/461 20/77CLP4320HO6-xFB 4/80 320 108 56” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 5.0/2.5 150/10.3 155/600 26/100CLP6300HO6-xFB 2/150 300 114 56” x 6” 14” x 12” x 8.4” 2”, 3”, 4” 3.75/1.8 150/10.3 174/675 29/113CLP6450HO6-xFB 3/150 450 171 56” x 6” 14” x 12” x 8.4” 2”, 3”, 4” 5.5/2.7 150/10.3 250/969 41/162CLP6600HO6-xFB 4/150 600 228 56” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 7.5/3.7 150/10.3 331/1,283 55/214


31SPECIALTY FILTRATIONCLS SERIES UV SYSTEMS


SAFEGUARD UV SYSTEMS® CUP SERIESCOMMERCIAL U-SHAPED POLYMERThe CUP Series UVs carry on the 23-year tradition of quality, and a compact “U” vessel port orientation that reduces footprint. The Schedule-80 Modified Polymer construction is ideally suited for corrosive saltwater conditions. Can be horizontally or vertically mounted (Call for limitations).

The CUP Series SafeGUARD UV Systems, like all of our Commerical units, feature single-end UV lamp and Quartz Sleeve assemblies,They use a remote NEMA Type 12 thermoplastic Control Panel /Power Supply enclosure and is available with Basic or optional PLC(shown) control packages with either LPHO or Amalgam UV lamps. Power Supply Enclosures are UL 508a listed. NSF 50 Certified.

SYSTEM FEATURES• State-of-the-art electronic ballast matched precisely to the lamp’s power requirement to

ensure optimal UV-C output and maximized lamp life

• Highest-Quality American-Made UV-C lamps offer 12,000 hours of continuous operation** at or above the minimum required UV-C intensity levels required to meet your dose target

• Schedule-80 Modified Polymer* construction is stronger and can typically handle higher internal pressures than polypropylene and HDPE vessels

• Watertight design protects all electrical hardware from water damage

• Power supplies are 120v or 230v and are 50/60 Hz compatible

• Compact ‘U’ Inlet and Outlet configuration allows fitment where space is at a premium 6’ power cord and 20’ lamp cables

• Reduces microorganisms through ultraviolet light.

EPA Est. No.: 091668-FL-001


UV-C OUTPUT WATTS


(L X D)


(x) INLET/OUTLET

PORT(S) (FLANGE)AMPS MAX LOAD @ 120/230 VAC MAX PSI/BAR

30 MJ/CM2 GPM/LPM

180 MJ/CM2 GPM/LPM

CUP4160HO6-xFB 2/80 160 54 52” x 6” 14” x 12” x 8.4” 2”, 3”, 4” 3.0/1.5 50/3.4 81/314 13/52CUP4240HO6-xFB 3/80 240 81 52” x 6” 14” x 12” x 8.4” 2”, 3”, 4” 4.0/2.0 50/3.4 119/461 20/77CUP4320HO6-xFB 4/80 320 108 52” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 5.0/2.5 50/3.4 155/600 26/100CUP6300HO6-xFB 2/150 300 114 70” x 6” 14” x 12” x 8.4” 2”, 3”, 4” 3.75/1.8 50/3.4 174/675 29/113UP6450HO6-xFB 3/150 450 171 70” x 6” 14” x 12” x 8.4” 2”, 3”, 4” 5.5/2.7 50/3.4 250/969 41/162CUP6600HO6-xFB 4/150 600 228 70” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 7.5/3.7 50/3.4 331/1,283 55/214

CUP SERIES LOW-PRESSURE AMALGAM UV SYSTEMS


UV-C OUTPUT WATTS



AVAILABLE INLET/OUTLET PORT(S)

(FLANGE)AMPS MAX LOAD@

120/230 VAC MAX PSI/BAR30 MJ/CM2 GPM/LPM

180 MJ/CM2 GPM/LPM

CUP4130A6-xFB 1/130 130 40 52” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 2.1/1.0 50/3.4 66/255 11/42CUP4260A6-xFB 2/130 260 80 52” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 3.9/2.0 50/3.4 112/434 18/72CUP4390A6-xFB 3/130 390 120 52” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 5.8/2.9 50/3.4 161/624 27/104CUP4390A8-xFB 3/130 390 120 54” x 8” 16” x 14” x 8.4” 3”, 4” 6” 5.8/2.9 50/3.4 228/883 38/147CUP4520A8-xFB 4/130 520 160 54” x 8” 20.2” x 16.3” x 8.4” 3”, 4” 6” 7.5/3.7 50/3.4 296/1,147 49/191CUP4650A8-xFB 5/130 650 200 54” x 8” 24.6” x 20.2” x 10.6” 3”, 4” 6” 9.4/4.7 50/3.4 346/1,341 58/223CUP4780A10-xFB 6/130 780 240 60” x 10” 24.6” x 20.2” x 10.6” 4”, 6”, 8” 11.2/5.6 50/3.4 480/1,860 80/310CUP4910A10-xFB 7/130 910 280 60” x 10” 24.6” x 20.2” x 10.6” 4”, 6”, 8” 13.3/6.5 50/3.4 564/2,185 94/364CUP4910A12-xFB 7/130 910 280 62” x 12” 24.6” x 20.2” x 10.6” 6”, 8” 13.3/6.5 50/3.4 648/2,511 108/418CUP41040A12-xFB 8/130 1,040 320 62” x 12” 30.5” x 24.1” x 12.6” 6”, 8” 15.0/7.5 50/3.4 763/2,956 127/493CUP6320A6-xFB 1/320 320 98 75” x 6” 24.6” x 20.2” x 10.6” 2”, 3”, 4” 3.2/1.6 50/3.4 165/639 27/106CUP6640A6-xFB 2/320 640 196 75” x 6” 24.6” x 20.2” x 10.6” 2”, 3”, 4” 6.0/3.0 50/3.4 276/1,070 46/178CUP6960A6-xFB 3/320 960 294 75” x 6” 24.6” x 20.2” x 10.6” 2”, 3”, 4” 9.0/4.5 50/3.4 392/1,519 65/253CUP6960A8-xFB 3/320 960 294 77” x 8” 24.6” x 20.2” x 10.6” 3”, 4” 6” 9.0/4.5 50/3.4 587/2,275 98/379CUP61280A8-xFB 4/320 1,280 392 77” x 8” 24.6” x 20.2” x 10.6” 3”, 4” 6” 12.0/6.0 50/3.4 744/2,883 124/480CUP61600A8-xFB 5/320 1,600 490 77” x 8” 24.6” x 20.2” x 10.6” 3”, 4” 6” 15.0/7.5 50/3.4 848/3,286 141/548CUP61920A10-xFB 6/320 1,920 588 79” x 10” 30.5” x 24.1” x 12.6” 4”, 6”, 8” 18.0/9.0 50/3.4 1,198/4,642 200/773CUP62240A10-xFB 7/320 2,240 686 79” x 10” 30.5” x 24.1” x 12.6” 4”, 6”, 8” *** 50/3.4 1,405/5,442 234/907When ordering: Replace ‘x’ in part number with requested flange size; e.g., ‘2’ for two-inch flange. Basic or Optional PLC Control Package available. ***230 VAC/11 AMPS.


32 SPECIALTY FILTRATIONHOSS SERIES UV SYSTEMS/CVP SERIES UV SYSTEMS

CVP LOW-PRESSURE AMALGAM UV SYSTEMS


UV-C OUTPUT WATTS


(H X D)


(x) INLET/OUTLET

PORT(S) (FLANGE)

AMPS MAX LOAD@ 120/230 VAC MAX PSI/BAR

30 MJ/CM2 GPM/LPM

180 MJ/CM2 GPM/LPM

CVP4130A6-xFB 1/130 130 40 57” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 2.1/1.0 50/3.4 66/255 11/42CVP4260A6-xFB 2/130 260 80 57” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 3.9/2.0 50/3.4 112/434 18/72CVP4390A6-xFB 3/130 390 120 57” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 5.8/2.9 50/3.4 161/624 27/104CVP4390A8-xFB 3/130 390 120 63” x 8” 16” x 14” x 8.4” 3”, 4” 6” 5.8/2.9 50/3.4 228/883 38/147CVP4520A8-xFB 4/130 520 160 63” x 8” 20.2” x 16.3” x 8.4” 3”, 4” 6” 7.5/3.7 50/3.4 296/1,147 49/191CVP4650A8-xFB 5/130 650 200 63” x 8” 24.6” x 20.2” x 10.6” 3”, 4” 6” 9.4/4.7 50/3.4 346/1,341 58/223CVP4780A10-xFB 6/130 780 240 68” x 10” 24.6” x 20.2” x 10.6” 4”, 6”, 8” 11.2/5.6 50/3.4 480/1,860 80/310CVP4910A10-xFB 7/130 910 280 68” x 10” 24.6” x 20.2” x 10.6” 4”, 6”, 8” 13.3/6.5 50/3.4 564/2,185 94/364CVP4910A12-xFB 7/130 910 280 75” x 12” 24.6” x 20.2” x 10.6” 6”, 8” 13.3/6.5 50/3.4 648/2,511 108/418CVP41040A12-xFB 8/130 1,040 320 75” x 12” 30.5” x 24.1” x 12.6” 6”, 8” 15.0/7.5 50/3.4 763/2,956 127/493When ordering: Replace ‘x’ in part number with requested flange size; e.g., ‘2’ for two-inch flange. Basic or Optional PLC Control Package available.

CVP LOW-PRESSURE HIGH-OUTPUT UV SYSTEMS


UV-C OUTPUT WATTS


(H X D)


(x) INLET/OUTLET

PORT(S) (FLANGE)

AMPS MAX LOAD

@ 120/230 VAC MAX PSI/BAR30 MJ/CM2 GPM/

LPM180 MJ/CM2 GPM/LPM

CVP4160HO6-XFB 2/80 160 54 57” x 6” 14” x 12” x 8.4” 2”, 3”, 4” 3.0/1.5 50/3.4 81/314 13/52CVP4240HO6-XFB 3/80 240 81 57” x 6” 14” x 12” x 8.4” 2”, 3”, 4” 4.0/2.0 50/3.4 119/461 20/77CVP4320HO6-XFB 4/80 320 108 57” x 6” 16” x 14” x 8.4” 2”, 3”, 4” 5.0/2.5 50/3.4 155/600 26/100

SAFEGUARD UV SYSTEMS® HOSS SERIESHIGH-OUTPUT STAINLESS STEELQuality craftsmanship meets superior design to deliver years of dependable and trouble-free operation. HOSS Series SafeGUARD UV Systems combine the latest, most efficient Low-Pressure (LP) UV lamp technology with robust stainless steel UV vessel construction to create a versatile, high-quality UV system suited for freshwater Aquaculture and light-Industrial applications.

HOSS UV Systems feature a thermoplastic NEMA 4x enclosure mounted to the UV vessel brackets, allowing 4-way orientation for either horizontal or vertical system mounting.

HOSS controls consist of analog re-settable hour meter, lamp-status LEDs, input power LED, and an external on/off switch. Single-end UV-C lamps and quartz sleeve access allows for quick-easy servicing. Cable hardware protects lamp connections from water damage and is durable and inexpensive to replace if required.

HOSS UV systems are compact aned designed to fit into tight spaces. All HOSS UV vessels feature stainless steel threaded ports and flanges. Power Supply Enclosures are UL 508a listed.

EPA Est. No.: 091668-FL-001

MODELLAMPS/WATTS

UV-C OUTPUT WATTS

UV VESSEL DIMENSIONS (H X D)


AVAILABLE INLET/OUTLET PORT(S) (FLANGE)

AMPS MAX LOAD @ 120/230 VAC MAX PSI/BAR

30 MJ/CM2* GPM/LPM

180 MJ/CM2** GPM/LPM

COM480HOSS 1/80 27 42” x 11” 12.5” x 10.5” x 7.7” 2“ MNPT 1.25/0.75 50/3.4 47/182 8/30COM4160HOSS 2/80 54 42” x 11” 12.5” x 10.5” x 7.7” 2“ MNPT 2.5/1.25 50/3.4 75/290 12/48COM4240HOSS 3/80 81 42” x 11” 12.5” x 10.5” x 7.7” 2“ MNPT 3.5/1.75 50/3.4 112/434 18/72COM4320HOSS 4/80 108 42” x 11” 12.5” x 10.5” x 7.7” 2“ MNPT 5.0/2.5 50/3.4 146/566 27/94*Recommended dose for algae and bacteria. **Typical maximum dose required in aquaculture applications. Call to determine the dose required for your application

SAFEGUARD UV SYSTEMS® CVP SERIESCOMMERCIAL VERTICAL POLYMERWhen operating space is restricted, our CVP (Vertical) Series SafeGUARD UV Systems provide the small footprint you need. CVP models feature single-end, top-loading quartz ware to minimize space required and maximize serviceability! Each model is extremely durable and features a corrosion-resistant remote power supply enclosure and UV vessel. All models are designed to deliver optimum UV performance by utilizing their UV lamp’s UV-C output to its maximum potential. CVP LPHO and Amalgam SafeGUARD UV Systems are watertight and designed for indoor/outdoor use. Each model is equipped with a flanged base for easy installation. Power Supply Enclosures are UL 508a listed.

EPA EST No.: 091668-FL-001

NOT RECOMMENDED FOR USE WITH SALT WATER APPLICATIONS.


33SPECIALTY FILTRATIONSMART UV STERILIZER/HIGH-OUTPUT UV STERILIZERS

SMART UV® HIGH-OUTPUT (HO) MULTI-LAMP UV STERILIZERSResearch facility staff and other aquatic husbandry personnel will find our Smart HO Multi-Lamp UV Systems are easy to install, operate and maintain. Single-end access allows for time saving serviceability of the lamp and quartz sleeve. Highest-Quality American-Made UV-C lamps offer 12,000 hours of continuous operation at or above the minimum required UV-C intensity levels required to meet your dose target. One-year warranty on ballasts.

SYSTEM SPECIFICATIONS: • Reduces microorganisms through ultraviolet light.

• Housing Material*: Heavy-Wall UV Resistant High-Density Polymer

• Housing Size: Refer to Chart Below (UV Vessel Dimensions)

• UV Lamp(s): Low-Pressure High-Output, T6-style

• Each lamp will require its own outlet

• 115V/60 Hz and 230V 50/60 Hz versions available.

EPA EST No.: 091668-FL-001


UV-C OUTPUT WATTS

UV VESSEL DIMENSIONS (L X D) INLET/OUTLET PORT(S)

AMPS MAX LOAD @ 120/230 VAC MAX PSI/BAR

30 MJ/CM2 GPM/LPM

180 MJ/CM2 GPM/LPM

0250100 2/50 100 30 35” X 6” 3” UNION 1.15/0.57 150/10.3 43/166 7/280250160 2/80 160 54 50” X 6” 3” UNION 1.15/0.57 150/10.3 81/314 14/520250240 2/120 240 74 62” X 6” 3” UNION 2.0/1.0 150/10.3 110/426 18/710250300 2/150 300 114 76” X 6” 3” UNION 2.6/1.3 150/10.3 174/675 29/1130250450 3/150 450 171 85” X 6” 3” UNION 5.5/2.7 150/10.3 250/946 41/1550250600 4/150 600 228 85” X 6” 3” UNION 7.5/3.7 150/10.3 331/1,253 55/208


SMART UV® HIGH-OUTPUT STERILIZERSUV vessels are built of a UV-resistant, high density polymer with a removable end cap to provide easy access. Internal viewing ports allow visual indication of lamp status. Units have 2” slip unions and 5 ¾” diameter housings. 10’ cable to ballast and 6’ cord to plug. 115V/60 Hz and 230V 50/60 Hz options available.

Models include an in-line, sealed watertight power supply for wet applications. One-year warranty on ballasts, limited lifetime warranty on the housing and 90-day warranty on lamps

EPA EST No.: 091668-FL-001

SYSTEM FEATURES• Reduces microorganisms through

ultraviolet light.

• Housing Material: Heavy-Wall UV Resistant High-Density Polymer

• Housing Pressure (Max.): 20 psi / 1.378 bar

• Housing Inlet/Outlet Port Size: 2” Union

• UV Lamp(s): Low-Pressure High-Output, T6-style

MODELINPUT WATTS

UV-C OUTPUT WATTS


AMPS MAX LOAD @ 115/230 VAC

30 MJ/CM2 GPM/LPM

180 MJ/CM2 GPM/LPM

E50S 50 15 30” x 6” 1.15/0.57 25/97 4/16E80S 80 27 45” x 6” 1.15/0.57 45/170 7/26E120S 120 37 57” x 6” 1.15/0.57 64/242 10/38E150S 150 57 71” x 6” 1.85/0.85 100/387 17/65Fluence (UV dose) calculated using UVT factors of 90–95%T and UV lamps at end of useful lamp life.

SAFEGUARD UV SYSTEMS® HIGH-OUTPUT SINGLE-LAMP COM SMART SERIESResearch facility staff and other aquatic husbandry personnel will find our SafeGUARD UV Systems COM Smart Series sterilizers easy to install, operate and maintain. Single-end access allows for time saving serviceability of the lamp and quartz sleeve. Highest-Quality American-Made UV-C lamps offer 12,000 hours of continuous operation at or above the minimum required UV-C intensity levels required to meet your dose target. Units are High-Output, 115V or 230v and are 50/60 Hz compatible, and have a one-year warranty on ballasts, limited lifetime warranty on the housing and 90-day warranty on lamps.

EPA EST No.: 091668-FL-001

MODELLAMPS/WATTS

UV-C OUTPUT WATTS


AMPS MAX LOAD @ 120/230 VAC

30 MJ/CM2 GPM/LPM

180 MJ/CM2 GPM/LPM

COM250HO-2UB 1/50 15 28” x 6” 1.15/0.57 25/97 4/16COM480HO-2UB 1/80 27 43” x 6” 1.15/0.57 45/170 7/26COM5120HO-2UB 1/120 37 56” x 6” 1.15/0.57 64/242 10/38COM6150HO-2UB 1/150 150 70” x 6” 1.85/0.85 100/387 17/65

VESSEL OVER-TEMP PROTECTION NOT AVAILABLE FOR THIS SERIES.


34 SPECIALTY FILTRATIONUV TECH TALK

TECH TALK 135 HOW DOES UV STERILIZE THE ORGANISMS IN MY WATER?When you hear “UV”, tanning on the beach may come to mind, but the UV light that water treatment systems emit is not the same UV that turns your skin to that golden brown, or red! Light is divided into wavelengths; for example red light and blue light are emitted at different wavelengths. Similarly there are 3 principal bands or wavelengths of UV that are of interest here. The three bands are called UV-A (long wavelength), UV-B, (mid wavelength) and UV-C (short wavelength). Sunlight that reaches the surface of the earth is comprised primarily of UV-A and has some UV-B. These wavelengths are what reach your skin when you go outside on a sunny day. UV-C is emitted by our sun, but is blocked by our atmosphere. UV-C is very natural!

UV-C is emitted at a wavelength range of 200nm (or nanometers) to 280nm.

SO, HOW DOES A UV SYSTEM WORK?The lamps used for disinfection are very similar to the lamps used in the fluorescent fixtures in your home. The primary difference is that the lamps in your home convert ALL of the UV-C generated by the lamp into visible light. The UV lamps in your water treatment system have no visible light converting phosphor (that white stuff on the inside of the fluorescent lamps), and special quartz envelopes that allow the UV-C to transmit outside of the bulb. The lamps in your home use a special glass envelope that totally blocks UV at any wavelength be it UV-A, UV-B, or UV-C. UV treatment systems are comprised of a highly efficient UV lamp that is situated within a high quality UV-C transmitting quartz sleeve, and in turn that lamp and sleeve are placed within a flow chamber or vessel. The quartz sleeve is the boundary between the water and the lamp; we don’t want our lamps to get wet!Water flows through the chamber, and around the lamp/sleeve assembly. The UV-C generated by the lamp emits through the water, hits the organisms we want sterilized, and does its job.

SO, WHAT DO WE NEED TO KNOW TO ENSURE SUCCESSFUL INSTALLATION OF A UV TREATMENT SYSTEM?-Target organism – What dose do we need?- Flow Rate – so we can get you the right dose at your flow rate- UVT or Ultra Violet Water Transmission –What is that???

UVT OR ULTRA VIOLET TRANSMITTANCEWater as a fluid allows light to pass through it, we all know that. We also know that water ‘attenuates’ or absorbs light as you go deeper and deeper into it, i.e. a lake or an ocean. Many people that scuba dive know that water absorbs red light faster than blue light; when you dive down the reds disappear or get absorbed before the blue light does. What this demonstrates is that water absorbs light at different rates, dependent on the wavelengths. UVT is not a common term. In fact, many do not even know that this parameter is one of the most important aspects with regards to ensuring that a UV treatment system works well. UVT is the amount of light, ONLY at 254nm (or the wavelength that the lamp emits), that can go through 1cm, or about 2/5’s of an inch of water. For example, a UVT of say 90% means that 90% of the UV-C light will still be there, and not absorbed, after travelling through 1cm of water. The lower the UVT, the more the UV-C light is absorbed by the water, and generally that means that we have to pick a system with more lamp power. Ineffective UV treatment can be attributed to improper consideration of UVT when sizing a system.Now UV-C light gets absorbed very quickly by water, even in very pure water. Even our atmosphere absorbs it. If you add things to the water, i.e. anything, the amount of UV-C that gets absorbed goes even higher and effectively the UVT value drops. At microscopic levels minerals, chemicals, tannins, biological debris, etc., can reduce the UVT value of your water. Some typical UVT values are:- Pools: 85% to 95% UVT- Aquaculture: 70% to 98%- Public aquariums & zoo displays: 70% to 98%.

AS THE WATER UVT DROPS, UV SYSTEMS NEED MORE LAMP POWER TO REACH THE SAME TARGET DOSE! Did you know that a system for 90% UVT water can sometimes require as much as 20% to 30% more lamp power than that of a system for water with a 95% UVT, even though they have the same flow rates and dose level requirements? UVT is very important! If you were to use 95% UVT as your criteria when you purchased your system, and your water was actually 90% UVT, your system would not treat your water appropriately; it would be undersized, and perhaps drastically undersized! This is a reason many people have trouble getting UV to work for them. They don’t take the actual UVT of their water into account. If you need assistance calculating your UVT please do not hesitate to contact a Pentair Aquatic Eco-Systems representative today!

Light emitted in the UV-C range is very effective at sterilizing very small organisms such as bacteria, fungi, algae, spores, viruses, etc. UV-B and UV-A do as well, just with much lower effectiveness. The peak effective wavelength for micro-organism sterilization is right near the middle of the UV-C wavelength band and found at 262nm. Keep that number in mind! That is where the biology and lamps meet; UV lamps primarily emit UV-C light at 254nm. This wavelength, which happens to be very close to the peak effective sterilization wavelength of 262nm!

It should be also noted that different organisms require different levels of exposure to UV-C in order to be sterilized; some organisms are tougher than others! This level of exposure is called UV ‘dose’. In basic terms dose is the intensity of the emitted UV light multiplied by the exposure time. For example when using the same UV treatment system for an application, doubling the flow rate through the reactor would halve the dose value. A doubled flow rate means that the water was exposed to the light from the UV lamp for half the time it had been before.

HARMFUL PATHOGENS ASSOCIATED WITH AQUACULTURE

OZONE With multiple partners in the ozone industry and our team of designers/technicians who understand aquarium and zoo applications, we can be your one stop shop for all things ozone! Call one our technicians for assistance selecting and sizing the right ozone system for your application!

TECH TALK 71 OZONE NOTESWe have offered ozone generators to the aquarium industry for well over 20 years. Ozonization is gaining in popularity for water treatment for the following reasons.

• It is highly effective in removing organics, pesticides, color and nitrite.

• It reverts back to oxygen quickly. Unlike chlorine, there are no detrimental residuals (except in salt water).

• It is produced on site.

• It is economical and non-polluting, when used correctly.

• It can be used as a sterilizer, before during and after water is used for aquaculture.

• Ozonization improves biological filtration and particulate filtration.

• It can reduce the biological oxygen demand in the water.

• It oxidizes long chain molecules, which biofiltration cannot do.

BASIC OZONE INFORMATION • Ozone is very unstable. It will revert back to oxygen within about

an hour, even if there are no organics in the water for it to oxidize.

• Temperature, pressure and shear cause it to revert back to oxygen. When ozone (O₃) molecules collide, they recombine as oxygen (O₂), so it is virtually impossible to get ozone to the tank above 10% (by weight). When under pressure or traveling a long distance in the tubing, it can revert considerably.

• Use dry air or oxygen to produce ozone. Humidity can reduce ozone production, form scale in the corona discharge (CD) reactor and produce nitric acid.

• OSHA says that it is harmful to breathe ozone above .1 ppm in the air (most people can smell ozone above .05 ppm). Vent gas outdoors or into an ozone destruction device, such a UV light or activated charcoal. Downflow bubble contactors such as cones and saturators are recommended so the gas cannot escape.

HOW IT WORKSOzone is generated by passing air or oxygen through a reaction vessel, where either an electric arc, CD or an ultraviolet (UV) lamp "excites" the oxygen. In this reaction, oxygen molecules separate into atoms of oxygen, which then temporarily recombine with each other to form ozone. When ozone oxidizes organics only one atom of oxygen is used, leaving one molecule of oxygen.

TYPES OF OZONE GENERATORSMost modern generators are the corona discharge (CD) type uses an electric arc similar to sparks or lightning to produce higher percentages of ozone by weight. A small CD reaction vessel can produce a relatively large volume of ozone. The greater the percentage of ozone, the faster the oxidizing reactions take place.

WHERE TO USE ITOzone can be used in a protein skimmer (foam fractionation device), where it helps the process, while the vessel allows capture of the off gas for venting or ozone destruction. Ozone works very well in oxygen saturators for the same reasons. We do not recommend its use in lakes or ponds, unless the water is pre-filtered and treated in a reaction vessel. Just bubbling it into the water is not effective.

HOW TO HANDLE ITOzone is a very strong oxidizer and must be handled with special materials. The best is stainless steel for tubing, valves and other components (certain Sweetwater® Air Diffusers are made for use with ozone). The second best material is pure PTFE, then PVDF and HDLPE. Stainless steel, PTFE and PVDF are suitable for ozone in feed gas, CPVC and HDPE and PP for ozone in solution.

SAFETYA whiff of low concentration ozone will not kill you. If you smell ozone in the air in your building, turn off the ozone generator and vent the air space. Note that OSHA requires an ambient ozone monitor on any generator that produces over 5 g/hr.

NO OZONE SYSTEM DESIGN SERVICEDue to the complex nature of custom ozone system design, we cannot provide that engineering service.


35SPECIALTY FILTRATIONOZONE TECH TALK

OZONE & UV = THE PERFECT COMBINATIONOzone (oxidizer)—Helps to remove DOC and color. Enhances micro-flocculation and improves solids settling. A low-moderate ozone residual, not exceeding 350mV, applied upstream of the UV system improves %UVT, optimizes the effectiveness of the UV system, and improves overall water quality. Additionally, by removing DOC, ozone improves dissolved oxygen levels.

UV Light (230-260 nm) also degrades ozone and DBP’s in water, eliminating potential harm to fish from residual oxidant.

60 mJ/cm2 destructs .1 mg/L residual ozone

90 mJ/cm2 destructs .3 mg/L residual ozone


36 SPECIALTY FILTRATIONPROTEIN FRACTIONATORS

SALTWATER PROTEIN FRACTIONATORSAll RK2 fractionators are built of high-quality, long-lasting, salt water and ozone compatible materials. They feature dedicated venturi manifold pumps, ozone-resistant PVDF injectors, washdown sprayers with electronic interval timers, EPDM flange gaskets, level control valves and unions or flanges at all ports. Motors available with any electrical configuration. AC models have clear bodies. PE models have high-density polyethylene (HDPE) bodies. All have clear acrylic collecton chambers. Ozone systems (with air dryers and oxygen generators) are sold separately. Ship motor freight, FOB California. Crating charge is included in price. One-year limited warranty. Made in USA.

MODELFLOW AT 2-MIN DWELL (GPM)

AMPS @ 230V/60 HZ/1PH HEIGHT* DIAMETER BASE DIMENSIONS SHIP WT (LBS)

RK10AC 10 .95 85” 10” 15” X 36” 200RK25PE 25 .95 85” 14” 24” X 30” 200RK50PE 40 1.3 99” 20” 24” X 42” 250RK75PE 70 4.3 102” 24” 24” X 42” 300RK75PE-HF 105** 5.75 102” 24” 24” X 42” 300RK150PE 155 6.9 101” 36” 36” X 54” 550RK150PE-HF 210** 8.3 101” 36” 36” X 54” 550RK300PE 290 8.3 110” 48” 48” X 66” 650RK300PE-HF 375** 7.8 110” 48” 48” X 66” 650RK600PE 600 8.3 (X2) 144” 60” 60” X 78” 1,000RK1000PE 1,100 8.3 (X4) 144” 84” 92” X 114” 1,500RK2000PE 1,500 7.8 (X4) 168” 84” 92” X 114” 1,800*Minimum clearance. Additional clearance for servicing is highly recommended. **Flow at 90 second dwell.RK2 Systems® is a registered trademark of RK2 Systems, Inc.

RK75PE

The flowrates shown are the rates at which culture water can move through a foam fractionator with a two-minute residence, or dwell time.

PART NO. TECHNICAL INFO INCLUDESCOMPATIBLE PROTEIN

FRACTIONATOR(S)6004 300 mg/hr @ 1.3% by

weight at 6 scfh.115V/60 Hz, 2.7 amps.

ORP controller with probe and mount.

No air prep.

RK10AC RK25PE

6009 1,000 mg/hr @ 1.3% by weight at 4 scfh.

115V/60 Hz, 2.7 amps.

ORP, temperature and pH controller, probesand mounts.

Built-in air dryer.

RK50PE RK75PE

6014 2,500 mg/hr @ 3% by weight at 8 scfh.

115V/60Hz, 3.1 amps

ORP, temperature and pH controller, probes and mounts.

Built-in air dryer.

RK75PE-HF RK300PE

RK300PE-HF6016 4 g/hr @ 3% by weight at 4 scfh

through external oxygen concentrator (included). 115V/60 Hz, 4.6 amps.

ORP, temperature and pH controller, probes, mounts and

oxygen concentrator.

RK150PE-HF RK300PE

RK300PE-HF

6017 8 g/hr @ 3% by weight at 8 scfh through external oxygen concentrator (included). 115V/60 Hz, 5.0 amps.



RK600PE

6024 15 g/hr @ 6% by weight at 6 scfh through external oxygen concentrator. (included).

115V/60 Hz, 7.6 amps.



RK1000PE

6030 27 g/hr @ 6% by weight at 12 scfh through external oxygen concentrator (included). 115V/60 Hz, 13.3 amps.



RK2000PE

RECOMMENDED OZONE GENERATORS


37SPECIALTY FILTRATIONOZONE CONTACT CONES

OZONE CONTACT CONESPENTAIR AQUATIC-ECO SYSTEMS (FORMERLY A PRODUCT OF HE GROUP)• 100% Utilization of gas

• Designed for maximum utilization of gas transfer area

• 25 or 50 psi pressure relief valves are optional

• Available in many sizes for various flow requirements

• Designed for containerized shipping anywhere in the world

OZONE CONES - 25 PSI

MODEL

DIAMETER (Ø) (IN.)

OVERALL HEIGHT (H) (IN.)

INLET/OUTLET Ø

(IN.)

LIQUID FLOW - MAX. (GPM)

O3C-025-012 12 38.0 1.5 46O3C-025-018 18 52.0 3.0 103O3C-025-024 24 66.0 3.0 186O3C-025-030 30 80.5 4.0 289O3C-025-036 36 94.0 6.0 412O3C-025-042 42 108.0 6.0 565O3C-025-048 48 122.0 6.0 742O3C-025-054 54 136.5 8.0 933O3C-025-060 60 150.0 8.0 1,157O3C-025-072 72 178.5 10.0 1,664

OZONE CONES - 50 PSI

MODEL

DIAMETER (Ø) (IN.)

OVERALL HEIGHT (H) (IN.)

INLET/OUTLET Ø

(IN.)

LIQUID FLOW - MAX. (GPM)

O3C-050-012 12 38.0 1.5 46O3C-050-018 18 52.0 3.0 103O3C-050-024 24 66.0 3.0 186O3C-050-030 30 80.5 4.0 289O3C-050-036 36 94.0 6.0 412O3C-050-042 42 108.0 6.0 565O3C-050-048 48 122.0 6.0 742O3C-050-054 54 136.5 8.0 933O3C-050-060 60 150.0 8.0 1,157O3C-050-072 72 178.5 10.0 1,664Contact Cones include [1] 3/4" x 1/4" 316SS bushings for pressurized O₂ / O₃ inlet and [2] 3/4" x 1/2" 316SS bushings for optional Pressure Gauge and Pressure Relief Valve.

OZONE CONTACT CONES100% EFFICIENCY POTENTIALPentair Aquatic Eco-Systems Sweetwater cones are designed to optimize the saturation of gases in water, and gas transfer efficiencies of up to 100% are possible. Operation of the cone is simple: as water and gas (either pure oxygen, ozone or other gas) enter from the top at a relatively high velocity, the water shears and moves the bubbles downward. As the cone widens the velocity is reduced. The undissolved bubbles keep returning to the top, so only water without bubbles can exit the bottom. At higher pressures, the dissolved oxygen concentration may be increased significantly above saturation. For example, a Sweetwater cone operating at only 10 psi can deliver water with a dissolved oxygen concentration above 25 mg/L. Sweetwater cones may be operated at a pressure of up to 21 psi. No matter what concentration of dissolved oxygen is needed, Pentair AES has the right cone for your application. Please contact a Pentair AES technician for assistance with sizing and complete skid systems.

MODEL FLOW RANGEGALLONS (APPROX.) INLET/OUTLET

SHIP WT (LBS)

SUGGESTED FLOW METER

OY30F-1 73–130 45 3” 65 MFR440OY60F-1 150–260 110 4” 100 MFR4150OY110F-1 280–480 195 5” 245 MFR4150*OY140F-1 350–600 335 6” 290 MFR4150**Two required.

DIMENSIONSOY30F-1 OY60F-1 OY110F-1 OY140F-1

A 68” 85” 107” 129”B 24” 34” 40” 48”C 16” 16.5” 19.5” 22”D 3.5” 4” 5.5” 6”E 8” 9” 10” 11.5”

Oxygenated Water Outlet

Water Inlet

OY30S(Complete System Using OY30F-1—Call for Info)

A

C

B

D

E

OZONE COMPATIBLE

PUMP, FLOW METERS, FLANGES, AND VALVES

SOLD SEPERATELY

Notes: Oxygen and Ozone Contact Cones are built for indoor use only. All valves, piping and anchoring mechanisms are to be supported independently. Standard units are provided with non-rated Base Flange or (4) non-rated Hold Down Brackets. Anchor requirements and design for wind and seismic loads are by others, including: Reinforced Flange thickness, Number of and Type of Anchor points, and any additional hold down requirements.


38 HEATERS/CHILLERSHEAT/COOL PUMPS

XLHP® HIGH PERFORMANCE HEAT/COOL PUMPSWith today’s record energy costs, there’s never been a better time to invest in a Pentair Aquatic Eco-Systems XLHP High Performance Heat/Cool pump. Compared to gas, oil or electric heaters, XLHP High Performance Heat/Cool Pumps use just a fraction of the energy to generate the same amount of heat. In fact, just 20¢ worth of electricity produces $1.00 worth of heat generated by other methods.

MORE STANDARD FEATURES THAN ANY OTHER IN ITS CLASS• Both models are capable of heating and/or cooling the water.

Full heat/cool functionality.• Provides an AutoSet Temperature Control feature as standard.

It monitors water temperature and turns the pump on and off as needed, overriding the time clock to maintain desired temperature for convenient, hands-free control.

• Features the legendary Emerson® Copeland Scroll® Compressor that’s more efficient, durable, reliable and quieter than any piston-driven compressor.

• EPA-recognized, environmentally safe, non-ozone depleting R-410A refrigerant.

• 100% titanium heat exchanger assures corrosion-free performance for extra long life and value.

• LCD control board displays an intuitive, menu-driven readout with easy to follow, full word messages—no codes to memorize.

• Self-diagnostic software continuously monitors system for peak performance.

• Thermostatic Expansion Valve (TXV) controls refrigerant flow for optimum efficiency and BTU output over a wider operating temperature range.

• Automatic defrost feature senses refrigerant temperature and helps prevent the XLHP™ heat pump from freezing, allowing the unit to operate effectively at even lower temperatures than many competing products.

• ETL listing is your assurance of safer, dependable operation.• BTU and efficiency independently certified by the Air Conditioning,

Heating, and Refrigeration Institute (AHRI). The AHRI Certified mark is applied only to HVACR equipment and components that have been independently tested to certify that manufacturers’ performance claims are accurate.

• Maximum working water pressure is 50PSI.• Port Size: 2”, unions included with model 460900-AQ

LIFETIME WARRANTY-TITANIUM HEAT EXCHANGER10-YR WARRANTY - COMPRESSOR PARTS/LABOR

COMPARING THE COST TO HEAT YOUR BODY OF WATER OR AQUACULTURE SYSTEMHEATER/FUEL TYPE COST BTU/$1.00ELECTRIC $.1065/kWh 32,000LP GAS $1.87/Gal 40,100OIL $2.22/Gal 47,200NATURAL GAS $1.218/Therm 67,300XLHP HEAT PUMP $.1065/kWh 185,600Emerson® is a registered trademark of Emerson Electric Co., Copeland Scroll® is a registered trademark of Emerson Climate Technologies, Inc.

BTU/H CAPACITY COP** RATING FLOW (GPM)MODEL VOLTAGE HZ PHASE BREAKER RATING (AMPS) HEATING COOLING HEATING COOLING MIN MAX SHIP WT (LBS)460900-AQ 230* 60 1 50 127,000 72,000 5.4 4.1 30 120** 278460901-AQ 230* 60 1 50 140,000 80,000 5.7 4.1 30 120** 320*230V +/- 10%. Heat pumps can run from 207-253V. **Coefficient of Performance. ***If system flow rate exceeds 120 GPM, a bypass valve is required.

38.7"(983 mm)

4.5"(114 mm)

9.25"(235 mm)

11.25"(286 mm)

45.5"(1156 mm)

34.0"(864 mm)

32.0"(813 mm)

30.7"(780 mm)

Heat Pump Dimensions Typical Heating Cycle

Water Outlet (Warm) Evaporator Coil

Water Inlet (Cold)

Fan

WARM AIR IN

COLD AIR OUT


39COMPLETE SYSTEMSG-HAB

G-HAB SYSTEMSWith bigger tanks than the Z-Hab system, the G-Hab system is a nice fit for labs where larger species of fish are being used. Also a great choice for toxicology related studies in which plastic tanks may not be ideal.

FEATURESSUPERIOR DESIGN• Oversized, 5-stage, state-of-the-art filtration ensures optimal water

quality

• Low water level safety shut-off and alarm with optional programmable logic controller (PLC) control panel

• Aeration provided to each individual tank

• Heavy-duty, powder coated 316L stainless steel construction provides corrosion resistance, durability and ease of maintenance.

CONVENIENCE• Filtration bypass allows service while system runs

• Automatic water exchange saves time and reduces labor

FLEXIBILITY• 3-tier rack can accommodate 10-, 30- or 55-gallon glass tanks

• Central PLC control panel (optional)

• Each G-Hab System includes an unconditional 2-year warranty and 24/7 emergency support

SPECIFICATIONSWATER• Culture volume: 680 liters (180 gal) as shown

• 4 tank water exchanges per hour

• Total water volume: 870 liters (230 gal) as shown

• Weight with water: 1,182 kg (2,600 lbs)

ELECTRICAL• 115V/10 A/60 Hz

• 230V/5.1 A/50 Hz

FILTRATION• 1st Stage: 120-micron filter pad

• 2nd Stage: Submerged-bed biological filtration

• 3rd Stage: 50-micron filter cartridge

• 4th Stage: Activated carbon adsorbs volatile organics and contaminants

• 5th Stage: UV disinfection dose of 110 mJ/cm2 at end of lamp life

OPTIONS• Automated water quality monitor/control/alarm system

• Total gas pressure monitor/controller

• Temperature control (heating and chilling)

CALL FOR MORE INFORMATION


40 CONTROLLERS/MONITORSPOINT FOUR PLCS

CUSTOMIZED CONTROLLERS FROM PENTAIR AQUATIC ECO-SYSTEMS:No two aquatic applications are the same; and over the years, we’ve found that every real-world application has a unique set of needs. That’s why Pentair Aquatic Eco-Systems offers a variety of controller solutions that deliver a wide-range of capabilities for monitoring and control of your specific system needs. Our custom-configured controller systems provide unparalleled visibility of your aquatic facilities’ unique parameters; along with the ability to monitor and control a nearly limitless number of system attributes and features.

CONTROLLERS THAT MEET YOUR NEEDS:Pentair Aquatic Eco-Systems employs a full-time team of pioneering engineers in our New Product Development (NPD) department. In order to meet our customer’s needs, our New Product Development team works through a detailed process which takes into account the needs of the end-user; determining how those needs can be met by a custom-configured controller solution.

HOW THE PROCESS WORKS:The process starts with our highly-trained sales representatives, who work directly with customers to determine what’s needed for a particular application. Do you need to measure dissolved oxygen in the water, and control supplemental oxygen dosing if the level drops below a user-defined threshold? No problem… Do you want to have a touch screen that shows the flow rate, water temperature and salinity for each tank in your system? We can do that! What about sending you a text message or email if an alarm triggers a water leak when you’re not on site? No problem…

WHAT CAN WE DO FOR YOU?To put it simply; our highly-skilled team can combine sensors, relays, programmable logic controllers, touch screens, wireless systems and computers to provide a comprehensive overview of any number of system parameter that you desire; along with the ability to manipulate and change those parameters in real time. The possibilities are limitless, and the process starts as we work with you to determine which specific attributes of your system need to be monitored/controlled in order to allow the facility to operate in a stable, reliable manner.

TAILOR MADE SYSTEMS:As we work to understand the unique needs of your system and your specific operational goals, we’ll define the monitoring and control parameters by establishing a documented ‘Theory of Operation.’ This is a detailed set of specifications and operational information that is defined by us and approved by you. Once approved, the Theory of Operation is relayed to our Engineering dept. For most solutions, we apply a layer of unique configuration and customization to one of our existing field-proven controller platforms (ex. Point Four™ C1210). Once we’ve outlined all the hardware and software, we’ll prepare a detailed cost quote which is presented to you for approval. Upon approval, our team gets to work assembling, programming and testing your tailor made controller. All monitoring and control equipment produced in the Pentair Aquatic Eco-Systems production facility is backed by UL508A certification for the design and manufacturing of industrial control panels.

A RANGE OF CAPABILITIES:There are several customizable systems and a wide-array of sensors that we have applied to project installs in the past; including temperature, oxygen, and carbon dioxide sensors, as well as safety sensors to prevent floods or leaks. We can offer controllers for Commercial Aquaculture production that have the capability to manage pH dosing; altering the pH levels in the water automatically. Aquariums and zoos can use a customized Pentair Aquatic Eco-Systems controller equipped with wind speed sensors. During periods of high wind, the controller can engage a variable frequency drive to attenuate the pump’s flow rate to prevent unwanted waterfall or fountain overspray. Our systems can also employ water level sensors to avoid spillover events in sensitive laboratory environments. We’ve even customized systems to allow users to control pump flow rate and oxygen dosing levels during periods of fish feeding to help prevent uneaten feed from being drawn into the filters; preventing costly waste and reducing unwanted filter fouling.

Additionally, our controllers offer many ways to access system data, even if you are not physically on site or in the lab. Remote text message capabilities can be set to provide reports or updates about the system to ensure things are running smoothly. While travelling, use your smartphone, laptop or tablet to display real-time system values, providing system data anytime from anywhere. In summary, if you can dream it; we can build it.

POST-INSTALL SUPPORT:Once installed, our NPD team has the ability to do “live tweaks” to your system remotely and can adjust controls or sensors from an App located on a cellular device. Our global field service team can also provide in-person support for ongoing system maintenance and upgrades… In short, we understand the commitment required to provide top-notch service and support, and we are here when you need us.

CREATING SUCCESS…TOGETHER:Prepared to work with you to create monitoring and control systems that solve challenges and create opportunities. Contact us today to determine how our specialized capabilities in the area of monitoring and control can meet the unique needs of your facility.

POINT FOUR C-SERIES:

C351 C570 C1210C150


41CONTROLLERS/MONITORSPOINT FOUR LC3

POINT FOUR™ LC3 WATER MONITOR/CONTROLLERThe Point Four LC3 has been fully redesigned with connectivity in mind, allowing users full access to their system, from anywhere at any time - even on the go!

Displaying, notifying and reacting to sensor data is what the LC3 does best. Whether it’s triggering a low level water sensor alarm for an individual pen, cycling oxygen diffusers or sending an email/text message system alert warning to your smart phone; the Point Four LC3 is designed to keep your operations running smoothly & efficiently. Users can collect, manipulate, or control their data locally via the LC3’s clear and intuitive touch screen monitor or connect remotely using a smart device or PC to access the built-in web-server.

CALL FOR SYSTEM CONFIGURATION INFORMATION

KEY FEATURES• Remote access compatible with a wide range of devices

[Android® platform, iOS™ mobile digital device, OS X®, Linux and Windows® Operating Systems]

• Built-in web server allows control system access thru the internet via web browsers

• Automated data logging for all connected Point Four RIU3 controllers, control devices, and sensors

• Communication options via Web Server

• Auto dialer output

• Digital alarm output

• Send email and email to SMS functions (Short Message Service)

• FTP (File Transfer Protocol)

• Remote System Access via VNC (Virtual Network Computing)

• Comprehensive Customer Support—Take advantage of our considerable engineering expertise and thorough after-sales support. Remote support allows troubleshooting and updates via the internet.

System SpecsVOLTAGE 110–230VAC or 24VDCDISPLAY 600 x 800 pixels, 8” Touch Screen,

LED BacklitOPERATION TEMP 0ºC to 60ºC (32ºF to 140ºF)ENCLOSURE RATING Nema 4x/IP66TYPICAL UNIT DIMENSIONS 12” x 14” x 10”

Remote Access Devices

Real VNC Remote View(Virtual Network Computing)

Cloud Connectivity

Point Four LC3

Point Four RIU3

Point Four RIU3

Point Four RIU3

Sense

AlarmControl

Web Dashboard

Remote System Control

Android® is a registered tradeamark of Google, Inc. iOS™and OS X® are trademarks and/or registered trademarks of Apple, Inc. in the United States and/or other countries. Windows® is a registered trademark of Microsoft Corporation.


42 CONTROLLERS/MONITORSPOINT FOUR RIU3

POINT FOUR™ RIU3 REMOTE WATER MONITOR/CONTROLLERThe Point Four RIU3 (Remote Interface Unit) offers a host of features suited to our customers’ detailed requirements for continuous monitoring & control of water parameters.

The RIU3 functions as either a stand-alone field mounted transmitter/controller, or can be daisy chained t o create a multi-linked network connection, supporting up to 40 units.

An unlimited amount of multi-linked network con nections can be made allowing for a scalable system fr om small hatchery operations to large RAS systems. Users can collect, manipulate and control all of their data via the Point Four RIU3 Controller, Point Four LC3 To uch Controller or with a computer using Point Four Sync HMI Software (windows based).

The RIU3 will accept multiple input types (4-20mA/ 0 -5 V/ Modbus RS485) and contains 2 SPDT 4amp relays which can be setup for up to six control blocks. Control blocks are configured directly via the keypad, or through a PC using a computer connection cable; allowing users to setup local control and configure alarm conditions

A key feature of the RIU3 is tank side probe calibration, which is easily performed using the weatherproof 4 button keypad. Probe calibration can now be done by just one operator, allowing the user to service the probe and adjust values all at the same probe location.

CALL FOR SYSTEM CONFIGURATION INFORMATION

MODEL1SSS601 POINT FOUR RIU3 WATER MONITOR/ CONTROLLER1SSS6020 PT4 RIU3 WITH 7M DO/TEMP PROBE W/ FLOWMETER/SOLENOID ON PVC PANEL1SSS6051 PT4 RIU3 WITH 15M DO/TEMP PROBE W/ FLOWMETER/SOLENOID IN ENCLOSURE1SSA028 PC DATA CABLE AND SOFTWARE

VARIOUS SENSOR INPUT TYPES:OxygenTemperature

BppH/ORP

SalinityTGPOptical DO

2 RELAY OUTPUTS:Alerting alarm conditions via light, siren or SMS and dosing oxygen or controlling blowers

SYSTEM SPECSPOWER 12-24VDC, 120mA SENSOR

POWEROnboard isolated 24VDC loop power supply (optional)

DISPLAY 8x2 Character, Large Font, LCD Backlit

INPUT 2 Sensor Input (user selectable):1 Probe input (optically isolated) (4-20mA /0 -5V/ Modbus RS485) & 1 Aux input (optically isolated ) for Temp or Bp

OUTPUT ALARM

Two SPDT 4 Amp relay-user configurable, LCD/LED Alarm IndicatorModbus RTU RS485 communication port, Network addressable 1-99.

CONTROL OUTPUT

Two relay outputs with selectable control band, ON/OFF or PID function [4-20mA / ModBus RS485 output]

ENVIRONMENTAL NEMA 4X/IP65, Sealed Cable Glands

TEMPERATURE -5 °C to +60 °C, - Operation-10 °C to +60 °C, - Storage

RELATIVE HUMIDITY

5% to 85% RH at up to +40 °C - Operation5% to 40% RH above +40 °C up to +60 °C - Storage

ALTITUDE Up to 3,000 m ( 10,000 ft ) - Operation/Storage

DIMENSIONS 125mm x 145mm x 75mm[ 4.9” x 5.7” x 3” ]

WEIGHT 457 grams [1 lb]

ACCESSORIES Wall Mount Bracket/Weather Shield EXPANSION PORT

Onboard Data Logging Capability

Remote Access Devices

Real VNC Remote View(Virtual Network Computing)

Cloud Connectivity

Point Four LC3

Point Four RIU3

Point Four RIU3

Point Four RIU3

Sense

AlarmControl

MULTI-LINK

RELAY #1 CONTROL FLOWMETER

MANIFOLD

PROBE

POWER

PC DATA LINK

RELAY #1 CONTROL SYSTEM

ALARM LIGHT

SINGLE CONTROLLER

1SSS6051

SPARUS™ PUMP WITH CONSTANT FLOW TECHNOLOGY™ AND POINT FOUR™ PLC INTEGRATION OPTIONSMAINTAINING THE IDEAL WATER LEVELA local establishment was experiencing an issue with periodic overflowing of their aquarium. The issue was related to a lack of flow rate control, and lack of balanced flow rates between two pumps in the system. When the system malfunctioned, it was possible for the pump in the filtration room to move more water than the pump on top of the aquarium; causing water overflow into the dining room with no warning.

These overflow events caused damage to the facility and the equipment. The system experienced ongoing problems and the costs associated with the repairs were starting to mount-up. Additionally, the downtime associated with cleanup was frustrating and inconvenient for the staff members. Pentair Aquatic Eco-Systems’ aquatic life support team was approached to find a solution to this urgent situation.

As part of the solution the Pentair Aquatic Eco-Systems team strategically deployed a PLC system and two digital level sensors to allow the pump to maintain the water height within the tank to half-an-inch of a predefined target level. The new system automatically reports a signal back to the PLC which adjusts the pump’s flow rate to maintain the ideal water level; eliminating the issue of potential overflows!

Each Sparus with CFT pump features a digital communication port that allows for monitoring/control by programmable logic control (PLC) systems. The integration of a Point Four programmable logic controller (PLC) and Sparus Pump with Constant Flow Technology delivers a state-of-the art package capable of solving a variety of challenges facing aquatic facilities around the world.

For more details on this option and other integration possibilities, please contact us.

CALL FOR MORE INFORMATION

SPARUS PUMPWITH CONSTANT FLOW TECHNOLOGY

SYSTEM SUMPFLOW METER

GUIDED WAVE RADAR(LEVEL MEASURE)

DISPLAY TANK

SPARUS PUMPWITH CONSTANT FLOW TECHNOLOGY

1

2

1. Analog input (continuous read sensors). 2. Analog output (VFD pumps). 3. Digital input (buttons/switches). 4. Digital output (lights/valves). 5. Internet access required. 6. AutoDialer required. *Custom option.

1 If water level in display tank is too high decrease the speed of Pump1.

2 If water level in the display tank gets too low shut of f Pump 2.

PLC MC3-6066DISPLAY 3.5” Color TouchAI1 6AO2 0DI3 6DO4 6LOCAL ALARM Aud. & VisualEMAIL/TEXT ALARM5 Minor & CriticalPHONE ALARM6 1REMOTE ACCESS5 AvailableWEB DASHBOARD5 Available


43CONTROLLERS/MONITORSSPARUS W/CFT & POINT FOUR PLC INTEGRATION

COMMERCIAL AQUACULTUREAQUATIC RESEARCHZOOS AND AQUARIUMSLAKE AND POND MANAGEMENTAQUAPONICSDESIGN AND ENGINEERING SERVICES

BIOFILTRATIONGAS BALANCINGDISINFECTIONOXYGENATIONEFFLUENT MANAGEMENTSOLIDS REMOVALINFLUENT TREATMENTMONITORINGWATER QUALITY & MOVEMENT

TO REQUEST OUR FULL MASTER CATALOG OR TO SHOP ONLINE, VISIT PentairAES.COM

SHOP ONLINE:PentairAES.com

ORDERS AND ADVICE:877.347.4788+1 407 886 3939

SAME DAY SHIPMENT ON MOST ORDERS ENTERED BY: 4PM EST MONDAY-FRIDAYPhone lines are open 8AM-7PM EST Monday-Thursday • 8AM-5PM EST Friday

©2016 Pentair Aquatic Eco-Systems, Inc. All rights reserved. PAES200-4.A

zoos and aquariumsreal-world expertise former curators/operators bringing valuable expertise and...

Documents