akatherm hdpe brochure -...
TRANSCRIPT
Aim higher
Soil & Waste System
FACTTrend towards prefabrication In most countries the labour costs are becoming an increasing part of the total installed cost of a project. To keep these costs at a minimum all major builders are steering towards prefabrication and modular design.
FACTEvermore durable Total cost of ownership is the name of the game. When translating this to installed systems, it means durable and quality materials that are proven to be low maintenance, now and in the future.
FACTComplex modular designs While building plans can take several years to develop because of large and complex designs, the building itself takes up less and less time. This requires modular design and smart use of materials on site.
Driven by durabilityModern building designs present evermore extreme challenges. Today, whether a consultant or installer, you need soil & waste solutions capable of responding to the commercial challenges faced by your clients’ and end users’ businesses. The drive for more:
Low cost of ownershipEasy prefabrication and installation with secure joints all work together to keep the total cost of ownership at a minimum.
DurabilityAkatherm HDPE soil & waste systems are made from polyethylene, a durable material with a very long lifetime.
Security and flexibility Akatherm HDPE soil & waste systems can be poured into concrete, embedded in the ground or hung from the ceiling and still sustain and perform.
These particular challenges can only be overcome by a specialist drainage solution. Akatherm helps you meet these demands with confidence.Akatherm offers more than just a soil & waste system.Like every specialist drainage solution from Akatherm, it comes with a comprehensive level of support.
All our systems are backed by dedicated software, full training and unique products, plus the service standards you would expect from high performance drainage experts and the worldwide backing of the Aliaxis group.
Decisive advantages of Akatherm HDPEHigh Density Polyethylene is an exceptionally flexible and tough material, highly resistant to mechanical stress and impact even at low temperatures.
Akatherm HDPE has a complete product range consisting of pipes and fittings from 40 mm to 315 mm. It includes a wide range of branches, bends, traps, sanitary and connection fittings.
HDPE is a light weight system with simple and secure jointing techniques like electrofusion. It is a fully closed system with homogenous joints. Cost saving prefabrication is possible even in large sizes.
Be smarterAkatherm HDPE has a high temperature and chemical resistance which makes it ideal for drainage in residential housing, commercial kitchens and laundries. It is flexible and tough for installation underground and embedded in concrete. Its closed system is perfect for trade waste applications like industrial and laboratory fluids where system integrity and secure homogenous connections are critical.
Chemical resistant Elastic Hot water resistant Impact-resistant and tough
Quality and certificationAkatherm HDPE is developed and manufactured within an ISO 9001 Quality Assurance system and complies with the EN 1519 and other relevant international standards as well as meeting numerous national approved quality and safety standards.
The NetherlandsThe Netherlandndss BelgiumBelgiumium
DenmarkDenmararkk SwedenSwedenn ItalyItalyly
ISO 9001ISO 90011Quality
management system
ISO 14001ISO 14000011Environmental
management system
GermanyGermananyy
AustraliaAustralialia
AustriaAustriaia FranceFrance
SwitzerlandSwitztzerlandland
FinlandFinlandnd
Mechanical joints
fittings into prefabricated sections without using additional connection fittings.
Welded joints
Suited forefficient joints and prefabrication
Electrofusion is a rapid and simple way of permanently jointing individual pipes and fittings or prefabricatedpipe sections in tight places.
Suited for on-site
joints in tight areas
Jointing technology Akatherm HDPE offers a choice of welded and mechanical jointing techniques. Welded joints provide a homogenous joint ideal for ceiling voids, vertical stacks and underground pipework. Mechanical joints offer adjustability, flexibility and the option to demount.
Think it. Build it.Simple, secure & fast
Unbreakable at temperatures above 5°C
Material advantages
Elastic and flexible: Adjusts to local ground movement for underground use
Thermal resistant: Applications possible between
Chemical resistant: Suitable for transport of polluted waste water
UV & weather resistant: Unrestricted outside use through carbon black additives
Wear resistant: Lower cost due to long lifetime
Welded system: Simple and secure installation
System advantages
Homogeneous welded joints: Pull tight and leak proof for a completely closed system
Prefabrication:
of repetitive systems
Light in weight: Cost saving in transport and handling
Low heat conductivity: No condensation insulation required during short periods of cooling
100% recyclable and environmental friendly
+100°C
-40°C
50years
No vent stackrequired
Single stack system with anAkavent aerator for vertical installation in high-rise buildings
Complete product range including a wide range of
branches, bends, traps, sanitary and connection
fittings in conformity with EN1519
≤1 m
High ring stiffness for installation embedded in concreteUnderground within the building structure
Aim higherBecause skyscrapers are designed evermore extreme, a single stack soil & waste system offers you the possibility to aim higher. End users gain more useable space inside the building because the vent pipe is obsolete. Architects can create extreme building shapes and go ‘sky high’ because the unique aspects offer several flexible connection possibilities. Material and installation costs are reduced through low weight, the vent pipe being obsolete and prefabricated pipe segments.
Soil & Waste System
Pipes
Pipe temperedd1 Art. Nr.40 10 04 0050 10 05 0056 10 56 0063 10 06 0075 10 07 0090 10 09 00
110 10 11 00125 10 12 00160 10 16 00200 10 20 10250 10 25 10315 10 31 10200 10 20 00250 10 25 00315 10 31 00
d1 /d2 Art. Nr.50/40 16 05 0456/40 16 56 0456/50 16 56 0563/40 16 06 0463/50 16 06 0563/56 16 06 5675/40 16 07 0475/50 16 07 0575/56 16 07 5675/63 16 07 0690/40 16 09 0490/50 16 09 0590/56 16 09 5690/63 16 09 0690/75 16 09 07
110/40 16 11 04110/50 16 11 05110/56 16 11 56110/63 16 11 06110/75 16 11 07110/90 16 11 09125/50 16 12 05125/56 16 12 56125/63 16 12 06125/75 16 12 07125/90 16 12 09
125/110 16 12 11160/110 16 16 11160/125 16 16 12
d1 /d2 Art. Nr.40/32 15 04 0350/32 15 05 0350/40 15 05 0456/40 15 56 0456/50 15 56 0563/40 15 06 0463/50 15 06 0563/56 15 06 5675/40 15 07 0475/50 15 07 0575/56 15 07 5675/63 15 07 0690/40 15 09 0490/50 15 09 0590/56 15 09 5690/63 15 09 0690/75 15 09 07
110/40 15 11 04110/50 15 11 05110/56 15 11 56110/63 15 11 06110/75 15 11 07110/90 15 11 09125/50 15 12 05125/56 15 12 56125/63 15 12 06125/75 15 12 07125/90 15 12 09
125/110 15 12 11160/110 15 16 11160/125 15 16 12200/160 15 20 16250/160 15 25 16250/200 15 25 20315/200 15 31 20315/250 15 31 25
d1 /d2 Art. Nr.200/110 14 20 11200/125 14 20 12200/160 14 20 16250/200 14 25 20315/200 14 31 20315/250 14 31 25
Bend 90°d1 Art. Nr.
160 11 16 91200 11 20 91250 11 25 91315 11 31 91
Bend 90° with long sided1
Art. Nr.40 11 04 9250 11 05 9256 11 56 9263 11 06 9275 11 07 9290 11 09 92
110 11 11 92125 11 12 92
Bend 30°d1
Art. Nr.110 18 11 30125 18 12 30160 18 16 30200 18 20 30250 18 25 30315 18 31 30
Bend 15°d1
Art. Nr.110 18 11 15125 18 12 15160 18 16 15200 18 20 15250 18 25 15315 18 31 15
Bend 90° reducedd1 /d2 Art. Nr.
50/40 17 05 0463/40 17 06 05
Bend 180°d1
Art. Nr.40 11 04 9950 11 05 9956 11 56 9963 11 06 99
Soil & Waste System
Elbow 88,5°d1
Art. Nr.40 12 04 8850 12 05 8856 12 56 8863 12 06 8875 12 07 8890 12 09 88
110 12 11 88125 12 12 88160 12 16 88200 12 20 88250 12 25 88315 12 31 88
Elbow 45°d1
Art. Nr.40 12 04 4550 12 05 4556 12 56 4563 12 06 4575 12 07 4590 12 09 45
110 12 11 45125 12 12 45160 12 16 45200 12 20 45250 12 25 45315 12 31 45
Elbow 45° with long sided1
Art. Nr.75 12 07 4690 12 09 46
110 12 11 46
Elbow 90° with long sided1
Art. Nr.90 12 09 93
110 12 11 93
d1 /d2 Art. Nr.40/40 30 04 0450/40 30 05 0450/50 30 05 0556/40 30 56 0456/50 30 56 0556/56 30 56 5663/40 30 06 0463/50 30 06 0563/56 30 06 5663/63 30 06 0675/40 30 07 0475/50 30 07 0575/56 30 07 5675/63 30 07 0675/75 30 07 0790/40 30 09 0490/50 30 09 0590/56 30 09 5690/63 30 09 0690/75 30 09 0790/90 30 09 09
110/40 30 11 04110/50 30 11 05110/56 30 11 56110/63 30 11 06110/75 30 11 07110/90 30 11 09
110/110 30 11 11125/40 30 12 04125/50 30 12 05125/56 30 12 56125/63 30 12 06125/75 30 12 07125/90 30 12 09
125/110 30 12 11125/125 30 12 12160/50 30 16 05160/56 30 16 56160/63 30 16 06160/75 30 16 07160/90 30 16 09
160/110 30 16 11160/125 30 16 12160/160 30 16 16200/50 30 20 05200/56 30 20 56200/63 30 20 06200/75 30 20 07200/90 30 20 09
200/110 30 20 11200/125 30 20 12200/160 30 20 16200/200 30 20 20250/75 30 25 07250/90 30 25 09
250/110 30 25 11250/125 30 25 12250/160 30 25 16250/200 30 25 20250/250 30 25 25315/75 30 31 07315/90 30 31 09
315/110 30 31 11315/125 30 31 12315/160 30 31 16315/200 30 31 20315/250 30 31 25315/315 30 31 31
Branch 88,5°d1 /d2 Art. Nr.
40/40 20 04 0450/40 20 05 0450/50 20 05 0556/50 20 56 0556/56 20 56 5663/40 20 06 0463/50 20 06 0563/56 20 06 5663/63 20 06 0675/40 20 07 0475/50 20 07 0575/56 20 07 5675/63 20 07 0675/75 20 07 0790/40 20 09 0490/50 20 09 0590/56 20 09 5690/63 20 09 0690/75 20 09 0790/90 20 09 09
110/40 20 11 04110/50 20 11 05110/56 20 11 56110/63 20 11 06110/75 20 11 07110/90 20 11 09
110/110 20 11 11125/50 20 12 05125/56 20 12 56125/63 20 12 06125/75 20 12 07125/90 20 12 09
125/110 20 12 11125/125 20 12 12160/50 20 16 05160/56 20 16 56160/63 20 16 06160/75 20 16 07160/90 20 16 09
160/110 20 16 11160/125 20 16 12160/160 20 16 16200/75 20 20 07200/90 20 20 09
200/110 20 20 11200/125 20 20 12200/160 20 20 16200/200 20 20 20250/110 20 25 11250/125 20 25 12250/160 20 25 16250/200 20 25 20250/250 20 25 25315/110 20 31 11315/125 20 31 12315/160 20 31 16315/200 20 31 20315/250 20 31 25
315/315 20 31 31
Double branch 45°d1 /d2 Art. Nr.
110/40 36 11 04110/50 36 11 05
110/110 36 11 11
d1 /d2 Art. Nr.110/110 33 11 00125/110 33 12 00160/110 33 16 00
Soil & Waste System
Clean out branch 45°d1 /d2 Art. Nr.
110/110 33 11 00125/110 33 12 00160/110 33 16 00
Clean out branch 90°d1 /d2 Art. Nr.
40/40 23 04 0050/50 23 05 0056/56 23 56 0063/63 23 06 0075/75 23 07 0090/90 23 09 00
110/110 23 11 20125/110 23 12 00160/110 23 16 00200/110 23 20 00250/110 23 25 00315/110 23 31 00
d1 /d2 Art. Nr.110/50 24 11 14110/56 24 11 15110/63 24 11 16110/75 24 11 17110/90 24 11 19
110/110 24 11 01125/50 24 12 14125/56 24 12 15125/75 24 12 17
125/110 24 12 01125/125 24 12 12
d1 /d2 Art. Nr.110/50 24 11 24110/56 24 11 25110/63 24 11 26110/75 24 11 27110/90 24 11 29
110/110 24 11 02125/50 24 12 24125/56 24 12 25125/75 24 12 27
125/110 24 12 02125/125 24 12 22
d1 /d2 Art. Nr.110/50 24 11 34110/56 24 11 35110/63 24 11 36110/75 24 11 37110/90 24 11 39
110/110 24 11 03125/50 24 12 34125/56 24 12 35125/75 24 12 37
125/110 24 12 03125/125 24 12 32
d1 /d2 Art. Nr.110/50 34 11 14110/56 34 11 15110/63 34 11 16110/75 34 11 17110/90 34 11 19
110/110 34 11 01125/50 34 12 14125/56 34 12 15125/75 34 12 17
125/110 34 12 01125/125 34 12 12
d1 /d2 Art. Nr.110/50 34 11 24110/56 34 11 25110/63 34 11 26110/75 34 11 27110/90 34 11 29
110/110 34 11 02125/50 34 12 24125/56 34 12 25125/75 34 12 27
125/110 34 12 02125/125 34 12 22
d1 /d2 Art. Nr.110/50 44 11 14110/56 44 11 15110/63 44 11 16110/75 44 11 17110/90 44 11 19
110/110 44 11 01125/50 44 12 14125/56 44 12 15125/75 44 12 17
125/110 44 12 01125/125 44 12 12
Branch 88,5° swept entryd1 /d2 Art. Nr.
110/110 25 11 11
Akavent aeratord1
Art. Nr.110 60 11 17160 60 16 17
End capd1
Art. Nr.40 67 04 0750 67 05 0756 67 56 0763 67 06 0775 67 07 0790 67 09 07
110 67 11 07125 67 12 09160 67 16 09200 67 20 09250 67 25 09315 67 31 09
Soil & Waste System
d1 Art. Nr.
40 97 04 7840 97 04 7940 97 04 8040 97 04 8150 97 05 8050 97 05 8150 97 05 8256 97 56 8363 97 06 8263 97 06 8375 97 07 84
d1 Art. Nr.
40 96 04 7840 96 04 7940 96 04 8040 96 04 8150 96 05 8050 96 05 8150 96 05 8263 96 06 8263 96 06 83
d1 Art. Nr.
40 40 04 2050 40 05 2056 40 56 2063 40 06 2075 42 07 2090 42 09 20
110 42 11 20125 42 12 20160 42 16 20200 40 20 20250 40 25 20315 40 31 20
Connection fittings
Electrofusion coupler Akafusiond1
Art. Nr.40 41 04 9550 41 05 9556 41 56 9563 41 06 9575 41 07 9590 41 09 95
110 41 11 95125 41 12 95160 41 16 95200 41 20 65250 41 25 65315 41 31 65
Snap socketd1
Art. Nr.40 40 04 1050 40 05 1063 40 06 1075 40 07 1090 40 09 10
110 40 11 10125 40 12 10160 40 16 10200 40 20 10
Expansion socket with anchor point
Snap socket shortd1
Art. Nr.110 40 11 40
d1 Art. Nr.
40 42 04 5050 42 05 5056 42 56 5063 42 06 5075 42 07 5090 42 09 50
110 42 11 50125 42 12 50160 42 16 50
Screw coupler shortd1
Art. Nr.40 43 04 3050 43 05 3056 43 56 3063 43 06 3075 43 07 3090 43 09 30
110 43 11 30
Inspection screw lock longd1
Art. Nr.40 66 04 4050 66 05 4056 66 56 4063 66 06 4075 66 07 4090 66 09 40
110 66 11 40
d1 Art. Nr.
40 43 04 0550 43 05 0556 43 56 0563 43 06 0575 43 07 0590 43 09 05
110 43 11 05
Inspection screw lock shortd1
Art. Nr.75 66 07 00
110 66 11 20
Waste connectord1
Art. Nr.32 98 03 8140 98 04 8250 98 05 83
d1 Art. Nr.
40 91 04 7840 91 04 7940 91 04 8040 91 04 8150 91 05 8050 91 05 8150 91 05 8263 91 06 8263 91 06 83
d1 Art. Nr.
40 92 04 7840 92 04 7940 92 04 8040 92 04 8150 92 05 7850 92 05 7950 92 05 8050 92 05 8150 92 05 8250 92 05 8356 92 56 8363 92 06 8263 92 06 8375 92 07 84
Male threat adaptor short
Male thread adaptor long
Contraction socketd1/d Art. Nr.
40/50 55 04 0140/70 55 04 0250/70 55 05 0350/80 55 05 0456/75 55 56 0163/75 55 06 0163/85 55 06 0375/90 55 07 01
75/100 55 07 0290/110 55 09 02
110/125 55 11 02110/135 55 11 03110/150 55 11 04125/155 55 12 01125/170 55 12 02160/180 55 16 02160/195 55 16 04200/225 55 20 01250/280 55 25 01
Stub flanged1
Art. Nr.40 47 04 0250 47 05 0256 47 56 0263 47 06 0275 47 07 0290 47 09 02
110 47 11 02125 47 12 02160 47 16 02200 47 20 02250 47 25 02315 47 31 02
Soil & Waste System
Gasket flatd1
Art. Nr.40/32 47 04 13 91050/40 47 05 13 91056/50 47 06 13 81063/50 47 06 13 81075/65 47 07 13 81090/80 47 09 13 810
110/100 47 11 13 810125/100 47 12 13 810160/150 47 16 13 810200/200 47 20 13 810250/250 47 25 13 810315/300 47 31 13 810
Profile backing ring PP ductile iron cored1/DN
Art. Nr.40/32 47 04 09 01050/40 47 05 09 01056/50 47 06 09 01063/50 47 06 09 01075/65 47 07 09 01090/80 47 09 09 010
110/100 47 11 09 010125/100 47 12 09 010160/150 47 16 09 010200/200 47 20 09 010250/250 47 25 09 010315/300 47 31 09 010
Blind flange PP ductile iron cored1/DN
Art. Nr.40/32 47 04 85 01050/40 47 05 85 01056/50 47 06 85 01063/50 47 06 85 01075/65 47 07 85 01090/80 47 09 85 010
110/100 47 11 85 010125/100 47 11 85 010160/150 47 16 85 010200/200 47 20 85 010250/250 47 25 85 010315/300 47 31 85 010
Protection cap for piped1
Art. Nr.40 40 04 2950 40 05 2956 40 56 2963 40 06 2975 40 07 2990 40 09 29
110 40 11 29125 40 12 29160 40 16 29
d1/d Art. Nr.50/32 51 33 0150/40 51 35 0156/32 51 33 0356/40 51 35 0363/32 51 35 0263/40 51 36 0263/50 51 37 02
d1 Art. Nr.
110 43 11 15125 43 12 15160 43 16 15200 43 20 15250 43 25 15315 43 31 15
Sanitary fittings
d1 /d Art. Nr.90/90 50 09 84
110/90 50 11 85110/110 50 11 82
(vertical)
d1 /d Art. Nr.110/90 50 09 34
110/110 50 11 34
(horizontal)
d1 /d Art. Nr.110/90 50 09 35
110/110 50 11 35
(horizontal)
d1 /d Art. Nr.90/90 50 09 32
110/90 50 10 32110/110 50 11 32
(horizontal)
d1 /d Art. Nr.90/90 50 09 33
110/90 50 10 33110/110 50 11 33
d1 /d Art. Nr.90/90 50 09 51
110/90 50 11 51110/110 50 11 71
Protection plugd1 Art. Nr.90 43 09 19
110 43 11 19
d1 Art. Nr.90 50 09 01
110 50 11 01
d1 Art. Nr.90 50 09 11
110 50 11 11
socket/bend
d1 Art. Nr.129 50 11 13
Trap connection bend 90°d1 Art. Nr.40 51 04 1150 51 05 1156 51 56 1150 51 05 1256 51 56 12
Trap connection socketd1 Art. Nr.32 51 03 0140 51 04 0150 51 05 0156 51 56 0150 51 05 0256 51 56 02
socket/bend
d1 Art. Nr.46 51 33 0146 51 35 0158 51 35 0258 51 36 0258 51 37 0256 51 56 02
Universal protection plugArt. Nr.
43 46 19
Soil & Waste System
Traps
d1/d2 Art. Nr.40/40 04 04 0150/40 04 05 0150/50 05 05 0156/50 05 56 0163/50 05 06 0156/56 56 56 0163/63 06 06 0175/75 07 07 01
d1/d2 Art. Nr.40/40 04 04 0250/40 04 05 0250/50 05 05 0263/50 05 06 0256/56 56 56 0263/63 06 06 02
d1/d2 Art. Nr.40/40 04 04 0350/50 05 05 0356/56 56 56 0363/63 06 06 03
Universal trap with flange bushingd1 Art. Nr.63 06 06 0975 07 07 0990 09 09 09
110 11 11 09
Spare parts
socket short, snap socket and expansion socket
d1 Art. Nr.32 40 03 1340 40 04 1350 40 05 1356 40 56 1363 40 06 1375 40 07 1375 42 07 2390 40 09 1390 42 09 23
110 40 11 13110 42 11 23125 40 12 13125 42 12 23160 40 16 13160 42 16 23200 40 20 13200 40 20 23200 40 25 23200 40 31 23
and expansion socketd1 Art. Nr.32 40 03 1940 40 04 1950 40 05 1956 40 56 1963 40 06 1975 40 07 1990 40 09 19
110 40 11 19125 40 12 19160 40 16 19200 40 20 19
Protection plug for trap connection socket/bend
d1 Art. Nr.46 40 46 1958 40 58 19
Clamp linersd1 Art. Nr.40 70 04 1550 70 05 1556 70 56 1563 70 06 1575 70 07 1590 70 09 15
110 70 11 15125 70 12 15160 70 16 15200 70 20 15
Anchor bracketd1 Art. Nr.40 70 04 7850 70 05 7856 70 56 7863 70 06 7875 70 07 7890 70 09 78
110 70 11 78125 70 12 78160 70 16 78200 70 20 80250 70 25 80315 70 31 80
Mounting plate for anchor bracketArt. Nr.
70 94 7870 94 80
Guide bracketd1 Art. Nr.40 70 04 1050 70 05 1056 70 56 1063 70 06 1075 70 07 1090 70 09 10
110 70 11 10125 70 12 10160 70 16 10200 70 20 80250 70 25 80315 70 31 80
Mounting plate for guide bracketArt. Nr.
70 94 1070 94 80
Support shell galvanisedd1 Art. Nr.40 90 04 0050 90 05 0056 90 56 0063 90 06 0075 90 07 0090 90 09 00
110 90 11 00125 90 12 00160 90 16 00
Soil & Waste System
Electrofusion control boxes
d1 Art. Nr.40-160 41 98 10
Control box Akafusion CB200+d1 Art. Nr.
200-315 41 98 20d1 Art. Nr.
40-315 41 99 10
Output leads for
d1 Art. Nr.40-160 41 99 71
200-315 41 99 72
d1 Art. Nr.40-160 49 20 00
d1 Art. Nr.75-250 49 30 00
d1 Art. Nr.90-315 49 40 00
Soil & Waste System
Scraper SpiderArt. Nr.
41 98 6041 98 65
Spider accessoriesAccessories
Art. Nr.Replacement blades 41 98 61
Roller set 3x 41 98 62Roller holder 41 98 63
Replacement screw M2, 5x6 for blades 41 98 64Case 41 98 66
ScraperArt. Nr.
61 33 11
Grease pencilArt. Nr.
41 96 20
Pipe cutterd1 Art. Nr.
40-63 49 09 1050-125 49 10 10
110-160 49 11 10
Mechanical tools
Akatherm BVIndustrieterrein 11PO Box 7149NL-5980 AC PanningenThe Netherlands
Tel +31 (0)77 30 88 650Fax +31 (0)77 30 75 232
Specialist Drainage Systems
01/14/009