ammeraal beltech modular · 2016.10.31 uni light ep c uni light ep 8,5 uni light ep 18 uni light ep...

www.unichains.com

Ammeraal Beltech ModularInnovative belt and chain solutionsfor every industry & application

ContentQ2 updates - Chains page 4

Q2 updates - Straight Running Belts page 5

Q2 updates - Side Flexing Belts page 6

Q3 - Straight Running Belts page 7

Q3 - Side Flexing Belts page 8

Q3 - Chains page 9

Q4 - Straight Running Belts page 10 - 11

Q4 - Side Flexing Belts page 12

Q4 - Chains page 13

Q1 updates - Chains page 14





Q2 updates - Straight Running Belts page 19 - 20








ContentQ2 updates - Chains page 28







UPDATES, MODULAR DATASHEETS – CHAINS

Date Serie Correction made

2016.04.20 uni 881, uni 8811 Plus+, uni 1700, uni 1701, uni 1702, uni 1703

Page 2: Delete avalibility (x) of machined sprockets

2016.04.20 uni 1701 Tab R Page 1: Change of G-diemnsions + addition of note

2016.04.20 uni 880 Tab R Page 1: Accessories, Rubber Top: remove K450

2016.04.20 uni 879 Tab R Page 1: Accessories, Rubber Top: remove K450

2016.06.09 uni 881 + 8811 (all datasheets)


UPDATES, MODULAR DATASHEETS – STRAIGHT RUNNING BELTS


2016.04.11 uni RTB Page 1: New drawing of belt

2016.04.20 uni M-SNB Page 1: G-lock note deleted

2016.04.20 uni SNB M2 34% Rib Page 3: Change in sprockets table, B-dimensions

2016.04.20 uni M-TTB 37 % + 37% CS

Page 2: Change in sprockets table: delete x in Pilot Bore for Z19

2016.04.20 uni OPB 4v 23% Page 3: Change in Tab-table: belt material and color

2016.04.20 uni CSB – serie Page 1: Alternative pin & lock material: delete PA&.6

2016.04.20 uni CPB Rouh Embedded

Page 1: Belt material and color table: change from PP UV to PP-I UV

2016.04.20 uni CPB C, Rough, 20% Rough

Page 2/3: Addition of note in Accessories for Top/Bottom insert, thread: Available insert size M5 + M6

2016.04.20 uni XLB M2 C Page 2: Delete (M2) at ”Curved” drawing

2016.04.20 uni X-MPB C Page 2: Note: Change from 43.3 (1.70 in) to 42.3 mm (1.67 in)

2016.06.21 uni ACB – serie Page 4: Change in sprockets table

2016.06.28 uni MPB – serie Page 4: Addition of Machined symbol ( ) in sprockets table for Z8

2016.06.28 uni RTB – serie Page 1: New and updated corner pictures

2016.06.28 uni M-SNB M3 14% Page 1: Alternative pin and lock material: G-lock removed

2016.06.29 uni MPB C Page 3: Addition of Bottom Hold Down Roller Tab

UPDATES, MODULAR DATASHEETS – SIDE FLEXING BELTS BELTS


2016.01.07 uni Flex ASB Curved Surface 43% Open Radius 2.5/3.0/3.5/4.0

Page 1: Change of T-dimensions + change of T to X

2016.04.20 uni Flex ONE Last page – change from Two way to One way

2016.06.28 uni Flex ASB Page 4: Addition of columns with B-dimension for ASB CS

2016.06.29 uni Flex ONE Page 1: Note for uni Flex ONE ER about availability in NA is removed



2016.01.07 uni QNB Ball New datasheet avaliabe

2016.01.07 uni OPB – serie Accessories, Tab, Bottom Hold Down: change of materials

2016.01.07 uni CPB RoughEmbedded

Page 1: Updated table, belt widths

2016.09.29 uni XLB serie Sprockets table: Z13 sprocket: change of molded to machined



2016.01.07 uni Flex ASB CurvedSurface 43% Open Radius2.5/3.0/3.5/4.0

Page 1: Change of T-dimensions + change of T to X

2016.08.17 uni Flex ASB Page 2: Error in table, wrong values (bottom of page)



2016.04.20 uni 881, uni 8811 Plus+,uni 1700, uni 1701,uni 1702, uni 1703




2016.10.17 uni S-MPB N + C Page 2: Accessories, Side Guard: changes in D, E, F, G dimensions

2016.10.26 uni QNB C + Rough Page 1: Alternative pin and lock materials, endlock: change of material to PA6.6

2016.10.26 uni OPB 4V 23% Rib Page 2: Accessories, Finger Plates: addition of Type 3 + adding I, J & K dimensions in table below

2016.10.31 uni Light EP Cuni Light EP 8,5uni Light EP 18uni Light EP 22uni Light EP 22% Fine-mesheduni Light EP 28uni Light EP 33uni Light EP 46

Page 2: Accessories, Flight table: change of the naming ”Flat” to Non Stick

2016.10.31 uni S-MPB C Page 4: Sprockets table, Z8: change from molded to machined, new drawing of machined sprocket added

2016.11.29 uni S-MPB C + N Page 2: Accessories, Side Guard: Dimensions of E changed (in drawing)

2016.12.20 uni M-QNB Vacuum Page 1: Change from to MTO --> Orange ”Standard ”-box changed to blue ”Belt material & color” box: Addition of ”Recommended”

2016.12.20 uni M-QNB NS Page 1: Removal of ”Belt and pin material & color” POM-SLF White + PP White Pin

2016.12.20 uni M-TTB 37% Page 1: Removal of ”Belt material & color” material PP Grey

2016.12.20 uni M-TTB 37% CS Page 1: Addition of ”Belt material & color” material POM-D Blue Addition of ”Pin material & color” material PBT Light Grey New and updated belt width table

2016.12.20 uni QNB C Page 3: Accessories, Tab: Change to MTO

2016.12.20 uni S-MPB CS 22% Page 1: Removal of ”Belt material & color” material PE-I Natural

2016.12.20 uni S-MPB N Page 1: Removal of ”Belt material & color” material PE-I Natural Removal of ”Pin material & color” material PE Natural

2016.12.20 uni S-MPB C Page 2: Accessories: ”Belt material & color”: removal of material PP White

2016.12.20 uni SNB M2 20% Page 2: Accessories, Tab: ”Tab material & color”: removal of material POM-D Blue

2016.12.20 uni SNB M2 50% Page 1: Removal of ”Belt material & color” material PP Grey

2016.12.20 uni SSB C Page 3: Accessories, Tab: Change to MTO + removal of material PP Grey



2016.12.20 uni SSB 22%, 32% & 29% Page 1: Change to MTO + ”Belt material & color” box: Addition of ”Recommended”

Page 2: Accessories, Rubber Top: Change to MTO

2016.12.20 uni L-SNB 36% Page 1: Removal of ”Belt material & color” material PP Natural Removal of ”Pin material & color” material PP Natural

2016.12.20 uni L-SNB 36% Page 1: Removal of ”Belt material & color” material POM-LF Brown New belt width table

2016.12.20 uni CPB Rough Embedded Page 1: Removal of ”Belt material & color” material PP-I UV White New belt width table

2016.12.20 uni CSB C, 8% + 8% Rough Page 1: Removal of ”Belt material & color” material PP Dark Grey New belt width table

Page 2: Change to MTO

2016.12.20 uni MPB 16% Page 1: Removal of ”Belt material & color” material PE-I Natural Removal of ”Pin material & color” material PE White New belt width table

2016.12.20 uni MPB RO Page 1: Change to MTO

2016.12.20 uni M-SNB M3 14% Page 1: Removal of ”Belt material & color” material PE Natural Removal of ”Pin material & color” material PE White New belt width table

Page 2: Accessories, Rubber Top: Flat, removal of the last row PP Grey and 03 Black

2016.12.20 uni Light – serie Page 2: Accessories, Rubber Top, addition of the words Non standard and standard in drawings

2016.12.20 uni MPB C Page 1: Addition of new material in ”Belt material & color” table: NBWR White New and updated belt width table – with NBWR



2016.10.17 uni Flex ONE – serie Page 7: Change in Pitch diameter & overall diameter columns

2016.10.31 uni Flex SNB – serie Page 4: Updated belt table: uni Flex SNB W R2.3 / uni Flex SNB WO R2.3

Page 4: Updated belt table: uni Flex SNB WT R2.3 – PBT pinsPage 5: Updated belt table: uni Flex SNB WT R2.3 – SS pins

2016.11.29 uni Flex ASBuni Flex ASB Radiusuni Flex ASB CS Radius

Page 3: Accessories, Side Guard: T-dimensions added

2016.12.20 uni Flex L-ASB Page 1: Removal of ”Belt material & color” material PP White

2016.12.20 uni Flex ASB Page 2: Removal of ”Belt material & color” materials 43% Open Curved Surface Radius 2.2: POM D White 43% Open Tab Curved Surface Radius 2.2: POM D White + Blue 43% Open Edge Radius 2.2: Change to MTO



2016.10.17 uni 881 Bevel + uni 881 Bevel v2

Page 2: Change from STANDARD to NON STANDARD

2016.10.31 uni 2600 CV Page 1: Note about product supports added



2017.02.10 uni 2600 C uni 2600C Tab

Page 1: Accessories, Rubber Top: no longer NON STANDARD

2017.02.23 uni 963 Change online – was set to Standard, now changed to Non Standard



2017.02.23 uni Flex SNB Page 7: Accessories, Flight / Standard (in table) Change from ”flat” to ”Flat Click on Flight” Accessories, Support / MTO ”Click on Flight Low”, Support material & color: change from POM-D White to POM-D Neutral



2017.01.30 uni JCB Page 1: Pin material & color, solid lock: change to blue Note below material table changed to: *Only for K200 / K300 chain Beltc width-table: addition of ”chain” in 50.3 and 75 mm ”Min No drive sprocket per shaft”: change from 1 to 2 in 50.3 mm

2017.01.30 uni ACB serie Page 1: “Pin and lock material & color” changed from Natural to Blue

2017.01.30 uni LPB Page 1: Change in “Surface Type”-note in information box in top of the page

2017.02.23 uni S-MPB C Page 2: Accessories, Rubber Top: Rubber material & color: Natural removed Accessories, Flight, Material & Color: POM-D changed to POM-DI

2017.02.23 uni S-MPB N Page 2: Accessories, Flight, Material & Color: POM-D change to POM-DI

2017.02.23 uni SNB M2 34% Page 1: Alternative pin and lock materials, Endlock: change from PP to PP-I

2017.02.23 uni SNB M2 34% Rib Page 1: Alternative pin and lock materials, Endlock: change from PP to PP-I

2017.02.23 uni OPB 4V 23% Fine-meshed Page 2: Accessories, Side Guard, Material & color: change from PP to PP-I

2017.02.23 uni M-TTB Page 2: Accessories, Rubber Top: new note added: ”Backflex radius for Rubber Top: 28 mm (1.10 in)”

2017.04.03 uni QNB Ball Page 1: Ball material & color: now available in blue



2017.04.06 uni 963 Changed in online filtering from Standard to Non Standard

2017.05.01 uni 1843 Page 1: Info changed in box for Permissible Tensile Strength

2017.05.23 uni 881 Tab v2 Page 1: Min radius, K325: change from 200 mm to 190 mm

2017.05.23 uni 512 Plus+ Single Hinge Page 2: Updated sprockets table

2017.05.23 uni 821 Page 2: Sprockets: Z19 Molded Cast Iron – not avaliable

2017.05.23 uni 879 Tab Safety Finger Page 1: Accessories, Product Support: addition of NON STANDARD

2017.05.23 uni 2600 Tab C Page 1: Accessories, Rubber Top: NON STANDARD removed

2017.05.24 uni 982 SC Page 1: Standard shipping lengths changed to 4.0 m (13.1 ft)



2017.05.23 uni Flex ASB Page 1: Change of running direction for uni Flex ASB 43% Open Radius 1.6 and uni Flex ASB 43% Open Radius 2.2

2017.05.24 uni Flex SNB Page : Table for ”Belt material & color”, cell for: uni Flex SNB CR Rubber Top R1.6 uni Flex SNB CI Rubber Top R2.3 uni Flex SNB C Rubber Top R2.3 = ”I” deleted in naming of: uni Flex SNB C Rubber Top R2.3 = cells splitted up, PP White deleted + PP Blue deleted



2017.05.22 uni NTB Page 1: Change in note in tablePage 2: Hub diameter changed

2017.05.22 uni M-OWL 40% Open Page 2: Bore size Z19: changed to 25.4 (1.00 in)

2017.05.22 uni Light EP 22% Fine-meshed

Page 4: Column for pilot bore: x’es added

2017.05.22 uni SSB C Page 4: Pitch diameter, Z31 changed

2017.05.22 uni OWL 66% Page 2: Column for pilot bore: x’es added

2017.05.22 uni S-MPB C Page 4: Bore size Z20: changed to machined + change of hub diameter New drawing of machined sprocked added

2017.05.22 uni LPB Rough Page 1: Notes below table: change from NLAS to NL

2017.05.22 uni OPB 4V 23% Rib Page 2: Accessories, Finger Plates, Table: Change from Single SIded to Double sided in 2nd row

2017.05.22 uni OPB 4V 23% Fine Meshed

Page 2: Accessories, Flight, Flight material & color: PP White changed to PP-I White

2017.05.22 uni MPB Flights Page 3: Bent, Material & Color, PE-I Natural changed to PE NaturalPage 4: Flat 22%, Material 6 Color: PE-I white changed to PP-I white

2017.05.22 uni CSB serie Page 2: Accessories, Rubber Top: change from ”Flat” to ”Flat Rib”

2017.05.22 uni ACB Roughuni ACB 2% Rough (POX FR)

Page 1: Pin & lock material and color: change (for belt material POX FR) to PBT LG + change in belt width table to PBT

2017.05.22 uni CSB Roughuni CSB 8% Rough

Page 1: Pin & lock material and color: change to PBT LG + change in belt width table to PBT

2017.05.22 uni XLB M2 15 Roughuni XLB M2 Cuni XLB M2 Rough

Page 2: Accessories, Rubber Top: change from ”Curved” to ”Curved Rib”

2017.05.23 uni XLB serie Page 3: Change i sprockets table from molded to machined sprockets for Z13 teeth

2017.05.24 uni SNB M2 50% Open Page 1: Belt material & color table: change from PA6.6 to PP also in belt width table

2017.05.24 uni SNB M2 20% + 34% Page 2: Accessories, Flight, 20% Flat/Non stick split up of cells

2017.05.24 uni ACB Rough (POX FR) Page 2: Accessories, Top/Bottom Insert, Electrical Conductive: removal of POM-EC Accessories, Flight, Car Pusher: removal of POM-NL

Page 4: Sprocket table, bore size: change from molded to machined

2017.05.24 uni ACB Rough (POM NL) Page 2: Accessories, Top/Bottom Insert, Electrical Conductive: removal of POX-FREC Accessories, Flight, Car Pusher: removal of POX FR




2017.05.24 uni ACB 2% Rough (POX FR) Page 2: Accessories, Top/Bottom Insert, Electrical Conductive: removal of POM-EC Accessories, Flight, Car Pusher: removal of POM-NL


2017.05.24 uni ACB 2% Rough (POM NL)

Page 2: Accessories, Top/Bottom Insert, Electrical Conductive: removal of POX-FREC Accessories, Flight, Car Pusher: removal of POM-FR


2017.06.01 uni CSB serie Page 3: Addition of Accessories, Side Guard

2017.06.12 uni LPB Rough Change online – was set to Non-standard, now changed to Standard

2017.06.12 uni Flex ASB Edge R2.2 Change online – was set to Standard, now changed to Non-standard



2017.09.22 uni 843uni 1873 Grip G3uni 1873 STuni 963 Tab

Change of material – from: POM-D to POM-DIPOM-LF to POM-LFI

2017.09.26Update of: uni Rubber Profile overview for chains at the website.

UPDATES, MODULAR DATASHEETS – SIDE FLEXING BELTS


2017.09.22 uni Flex ASB – serie Page 1: All uni Flex ASB datasheets do now have their own datasheet --> divided from 1 to 6 datasheets



2017.09.22 uni QNB Ball Page 1: Change of Ball material & color from write to blue Change of ”profile picture” – also updated online



2017.11.13 uni Flex L-OSB 65% Open (Radius 2.2)

Page 3: Sprockets --> width of tooth changed

2017.11.22 uni Flex ASB – serie Sprockets --> ø30 are no longer available for teeth Z07

2017.12.05 uni Flex OSB – serie Page 2: Side Gurad --> removal of white material



2018.01.11 uni 1843 Page 1: info box: Standard shipping length changed

2018.02.01 uni 882 + uni 882 Tab Page 1: Accessories, Rubber Top: K1200, x-dimensions changed

2018.03.02 uni 843 SK + uni 843 SKR Page 1: “Standard shipping lengths, no. of roller chain links/box” changed

2018.03.13 uni NH 78 Page 1: “uni NH 78 T1” is mentioned in both Standard and Non-standard material & colors tables --> now only shown in Standard table



2017.09.22 uni Flex SNB Page 2: Belt table, 2nd row: uni Flex SNB C R2.3 removed --> is already mentioned in row just above



2018.01.05 uni MPB 16% Page 1: Update of belt table

2018.01.16 uni ACB Rough (POM-NL)uni ACB Rough (POX-FR)

Page 1: Update of belt table

2018.01.25 uni BLB 18% Page 1: Update of belt table

2018.01.31 uni JCB Y Top Page 1: Update of belt table

2018.02.16 uni MPB flight Page 2: Non Stick, Material & color: PP-I N removed PE-I W removed

10% Non Stick, Material & color: PP-I N removed PE-I W removed

Page 3: Flat 22%, Material & color: PE-I W removed

2018.03.13 uni CNB – serie Page 3: Hub diameter, Z10 dimensions changed

2018.03.13 uni Light EP Page 3: Accessories, Tab: change of material to POM-D N

2018.03.14 uni Light Page 3: Accessories, Tab: change of material to POM-D N



09.04.2018 uni 882 + uni 882 Tab Page 1: Accessories, Rubber Top, X-dimensions (K1200) changed

2018.05.25 uni 882 Tab PRR Page 1: J dimensions changed

09.04.2018 Rubber profiles overview uni Rubber Profile sheet updated as pr 2018



2018.05.16 uni Flex L-ASB serie Note about uni AmFlight Overview removed



uni ECB Page 3: Removal of Kleenflight = change from 4 to 2 pages

2018.05.16 uni Flex QNB serieuni CPB Cuni SNB M2uni S-MPB

Note about uni AmFlight Overview removed

2018.06.15 uni S-MPB C Page 1: Addition of POM-DI B

Page 2: Accessories, Flight, Addition of POM-DI B

Material and Color overview: Page 3: POM-XRD – White material removed, Neutral material added



16.08.2018 uni 880 Page 1: Accessories, Rubber Top – K350 width removed

Aug 31st 2018 Rubber Profile Overview updated



16.08.2018 uni QNB C + uni QNB Rough Page 3: Accessories, Non standard – Tab – Single Link Only

16.08.2018 uni ACB serie Page 1: L-dimensions changed



07.01.2019 uni 822 + uni 822 Tab Page 1: Accessories, Rubber Top, K1200, X dimensions changed

13.03.2019 uni 880 Super Flex Page 2: Width of tooth value changed (in note below table)

13.03.2019 uni 881 Super Flex Page 2: Width of tooth value changed (in note below table)



08.01.2019 uni M-QNB C Page 1: Belt width table, material for SLF mentioned wrong

28.02.2019 uni X-MPB Page 1: Belt width table updated

Material & color overview: updates, page 11: changes in ”Recommended Temperature Range” column

2019.01.29: Approvals: The materials PBT, PA6.6 GFH and NBWR are moved to the cell ”FDA & EC1935/2004”

2019.03.28: Approvals: ”FDA & EC 1935/2004” subline changed to: ”FDA, EC1935/2004 and EU 10/2011”

T +31 72 575 1212F +31 72 571 [email protected]

This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies.

Global Headquarters:Ammeraal Beltech Holding B.V.P.O. Box 38, 1700 AA HeerhugowaardThe NetherlandsC

onve

yor

Belts

Expert advice, quality solutionsand local service for all your belting needswww.ammeraalbeltech.comSe

amle

ss B

elts

Mod

ular

Bel

ts

Tim

ing

Belts

Tran

smis

sion

Bel

ts

Fabr

icat

ion

& s

ervi

ce

Dat

e: 0

7.20

16

ammeraal beltech modular · 2016.10.31 uni light ep c uni light ep 8,5 uni light ep 18 uni light ep...

Documents