cadd/bim ata tandards f - · pdf filecadd/bim data standards version 1.2 september 2008 gis...

CADD/BIM DATA STANDARDS

FINAL

Geographic Information System Implementation Project

Phoenix Sky Harbor International AirportCity of Phoenix, Arizona

September 2008

CADD/BIM Data Standards—Final

Geographic Information System Implementation Project

Phoenix Sky Harbor International Airport

City of Phoenix, Arizona

September 2008

CADD/BIM Data Standards Version 1.2 September 2008 GIS Implementation—Phoenix Sky Harbor International Airport, City of Phoenix, Arizona i

QUALITY

We invite your comments and suggestions for improving this document.

TRADEMARKS

All brand names and product names are trademarks or registered trademarks of their respective

companies.

CADD/BIM Data Standards Version 1.2 September 2008 GIS Implementation—Phoenix Sky Harbor International Airport, City of Phoenix, Arizona i

TABLE OF CONTENTS

1. REVISION HISTORY & CHANGE CONTROL ..................................................................... 3 1.1. Change Control.................................................................................................................................................3 1.2. Revision History...............................................................................................................................................4

2. INTRODUCTION............................................................................................................ 5 2.1. Purpose .............................................................................................................................................................5 2.2. Scope ................................................................................................................................................................5 2.3. Intended Audience............................................................................................................................................5 2.4. References to parties.........................................................................................................................................6 2.5. Related Documents...........................................................................................................................................6 2.6. Request for Waiver...........................................................................................................................................7 2.7. Document Organization....................................................................................................................................7

3. OVERVIEW OF CADD/BIM STANDARDS ....................................................................... 8 3.1. Acquiring and Applying the Standards.............................................................................................................8 3.2. Consultant’s CADD Support Package..............................................................................................................8 3.3. Update Process .................................................................................................................................................8 3.4. CADD/BIM Standards Lineage........................................................................................................................9 3.5. Interchangeable Terminology...........................................................................................................................9 3.6. Division of Standards .....................................................................................................................................10

4. DATA STANDARDS AND SPECIFICATIONS .................................................................... 12 4.1. Introduction ....................................................................................................................................................12 4.2. Hardcopy Plots ...............................................................................................................................................12 4.3. Scanned Image Drawing Files........................................................................................................................12 4.4. CADD/BIM Software Drawing Files .............................................................................................................12 4.5. Layer/Level Assignments ...............................................................................................................................13 4.6. Standard Symbology ......................................................................................................................................18 4.7. Spatial Compliance.........................................................................................................................................19 4.8. Submittal Compliance Check Process ............................................................................................................19

5. GRAPHIC STANDARDS AND SPECIFICATIONS ............................................................... 21 5.1. Introduction ....................................................................................................................................................21 5.2. CADD Drawing File Organization.................................................................................................................21 5.3. Graphic Concepts ...........................................................................................................................................33

APPENDIX A - PHOENIX AVIATION DEPARTMENT CADD LAYER/LEVEL STANDARDS ............ 42

APPENDIX B - PHOENIX AVIATION DEPARTMENT STANDARD SYMBOLS................................ 94 Architectural ................................................................................................................................................................94 Telecommunication ...................................................................................................................................................104 Civil ...........................................................................................................................................................................105 Electrical....................................................................................................................................................................107 Fire Protection ...........................................................................................................................................................116 General ......................................................................................................................................................................120 Geotechnical ..............................................................................................................................................................123 Hazardous Materials ..................................................................................................................................................125 Interiors......................................................................................................................................................................126 Landscape ..................................................................................................................................................................128 Mechanical ................................................................................................................................................................129 Plumbing....................................................................................................................................................................133 Structural ...................................................................................................................................................................136 Survey/Mapping ........................................................................................................................................................139

CADD/BIM Data Standards Version 1.2 September 2008 GIS Implementation—Phoenix Sky Harbor International Airport, City of Phoenix, Arizona ii

LIST OF FIGURES

Figure 1. Typical Layers/Levels Contained in a Sheet File .........................................................................................13 Figure 2. Sheet and Feature-Specific Information.......................................................................................................14 Figure 3. Layer/Level Naming Format ........................................................................................................................15 Figure 4. Using Referenced Model Files to Build a New Model File without Redundant Effort................................17 Figure 5. Using Multiple Referenced Feature Files to Build a Sheet File without Redundant Effort .........................18 Figure 6. Sheet File Composition ................................................................................................................................21 Figure 7. Model File Naming Convention...................................................................................................................22 Figure 8. Sheet File Naming Convention ....................................................................................................................27 Figure 9. Example Drawing File Organization Options ..............................................................................................32 Figure 10. Typical Border Sheet Title Block with Sheet Identification Block ............................................................33 Figure 11. Vertical Title Block....................................................................................................................................37 Figure 12. Issue Block .................................................................................................................................................38 Figure 13. Designer Identification Block ....................................................................................................................38 Figure 14. Project Information Section (Management Block).....................................................................................39 Figure 15. Drawing Information Section (Management Block) ..................................................................................39 Figure 16. Sheet Title Block........................................................................................................................................40 Figure 17. Sheet Identification Block ..........................................................................................................................40

LIST OF TABLES

Table 1. AutoCAD versus MicroStation Interchangeable Terminology........................................................................9 Table 2. Discipline Designators...................................................................................................................................22 Table 3. Model File Types...........................................................................................................................................23 Table 4. Discipline Designators with Level 2 Designators..........................................................................................28 Table 5. Sheet Type Designators .................................................................................................................................31 Table 6. Comparison of Line Widths...........................................................................................................................34 Table 7. Screen Color Comparison..............................................................................................................................35 Table 8. ISO, ANSI, and Architectural Sheet Size Comparison..................................................................................36 Table 9. Drawing Scales ..............................................................................................................................................40

CADD/BIM Data Standards Version 1.2 September 2008 GIS Implementation—Phoenix Sky Harbor International Airport, City of Phoenix, Arizona 3

1. REVISION HISTORY & CHANGE CONTROL

All changes to the CADD/BIM Data Standards that are agreed upon will be documented below and

incorporated into this document. This document will be redistributed as appropriate each time a revision

is agreed upon.

1.1. CHANGE CONTROL

As changes arise, a change control form shall be completed and signed by the Aviation Department. The

change control form shall be appended to this document in both electronic and hardcopy form to record

the document evolution and change history.

1.1.1. Change Control Responsibilities

Initiator’s Responsibilities

1. Complete and then print the Change Control Form. Insert the completed Change Control Form to this

electronic document for future reference.

2. Revise this document to include the requested change, and document the change in the revision

history table).

GIS Management Responsibilities

3. Review and sign the hardcopy Application Change Control Form.


Change Control Form

Task No. Change No.

Project Name

Revision:

Impact on Budget:

Impact on Schedule:

Signing this document confirms that both the client and the developer have agreed on the changed requirements and design described in this form.

Aviation Dept. Lead

Signature Date

Woolpert Lead Signature Date

1.2. REVISION HISTORY

As changes to the CADD/BIM Data Standards are indicated and accepted, this document will be updated

accordingly and summarized in the following table.

Document Revision History

Name Date Reason for Change Change Control Form

Update to separate non-required items, add BIM

April 2008 Requested by City following waiver requests

RFI #17


2. INTRODUCTION

2.1. PURPOSE

All Computer Aided Drawing and Design (CADD) or Building Information Modeling (BIM) data created

for the Aviation Department must be developed and submitted according to the specifications

documented in this Standard. This includes data prepared both internally by City of Phoenix employees

and by outside organizations for work performed on behalf of Airport tenants and consultants to the

Aviation Department. The objective is to standardize design deliverables so that data and drawing files

received from these multiple sources can easily be integrated into the Aviation Department’s Geographic

Information System (GIS).

Each submitted CADD/BIM drawing file will become part of the permanent archive. The drawing serves

as a critical source for updating information within the Aviation Department’s GIS. These drawings

make up the baseline for future work at Aviation Department facilities. The availability of standardized

data products and drawing files for use on future projects maintains the value of the original data creation

effort. The standardization for CADD/BIM data allows drawing files and individual data layers to be

integrated with other data components, ensuring consistency in planning and design at Aviation

Department facilities.

CADD/BIM drawings are the primary source of data to both initially populate and update the Aviation

Department’s GIS over time. During the initial creation of the GIS, data ETL (Extract, Transform, Load)

scripts will be used to move data from CADD/BIM submittals into the GIS database. In the future, as new

drawings sets are received, these same tools will be used to extract the desired information from the

CADD/BIM drawings to update the GIS. This process will only be successful if CADD/BIM data and

drawings are developed according to a consistent standard that has as its end goal absorption into the GIS

in mind.

In addition, the FAA will require standard airport geospatial data for their own use and for sharing

important information with other airports. The Aviation CADD/BIM Standards are intended to support

these requirements

2.2. SCOPE

The scope of the CADD/BIM Data Standards is to document the standards for CADD/BIM data and

drawing development for the Aviation Department. It does not include other data issues, such as aerial

photography, coordinate systems, spatial data standards, or metadata. The specifications for these items

are covered in separate standards as described in the related document section.

2.3. INTENDED AUDIENCE

This document is intended to be used by people who maintain or create CADD/BIM data for the Aviation

Department. All City staff and outside consultants should understand the requirements of this standard

and follow its specifications for the submittal of CADD/BIM Data to the Aviation Department.


2.4. REFERENCES TO PARTIES

The primary receiving party and owner of the GIS its content and the standards is referred to as the

Aviation Department. The Aviation Department is the short name for Aviation Department a department

of the City of Phoenix.

The party providing CADD/BIM data is referenced as the SO. This is generally going to be a party

external to the Aviation Department whose submittals are controlled by contract. This standard and its

related documents are meant to be part of the contract addendum.

The primary Aviation Department contact between the Aviation Department and the SO is the Aviation

Project Manager.

2.5. RELATED DOCUMENTS

The following documents contain information that is related to this document and are referenced in the

appropriate section(s). The documents listed include other standards, regulations or reference materials.

This document is intended to be coupled with the CADD Layer/Level standards, which are published in

Appendix A to this document titled: “Phoenix Aviation Department CADD Layer/Level Standards”,

(hereinafter referred to as the CADD Layer Standard). In addition to this CADD/BIM Data Standards

document, the Aviation Department has developed a set of standards that together, comprise the GIS

Standards Data Guidebook. The Guidebook is comprised of the following documents, which can be found

on the following Aviation Department intranet site: http://phoenix.gov/skyharborairport/about/avdept-

policies.html#GIS

- Coordinate System Standards

- Aerial Photography Standards

- Spatial Data Standards

- Metadata Standards

- Quality Control Standards

- CADD/BIM Data Standards (this document)

- Consultant’s CADD Support Package

The following documents are available from sources outside of the Aviation Department:

- 49 CFR 1520, defines Sensitive Security Information and how it is to be handled. This document

is a federal regulation that applies to all citizens of and agencies within the United States.

Protection of Sensitive Security Information, United States Code of Federal Regulations, Title 49,

Volume 9, Part 1520, Revised as of October 1, 2005, http://www.gpoaccess.gov/cfr/index.html

- City of Phoenix Ordinance G-439

Together, these standards document the concepts, policies, and data creation practices necessary for the

Aviation Department to incorporate data into the GIS Program. These documents are designed to develop

the GIS for the Aviation Department so that city-maintained spatial data relevant to the Aviation

Department is shared through the process of replicating appropriate datasets from the city GIS in the data

tier. The converse of this applies for Aviation Department datasets required by city GIS users.

It is the responsibility of the SO to obtain the latest set of GIS Standards referenced in this document.

The SO is encouraged to contact the Aviation Department Project Manager to facilitate obtaining these


documents. The SO is also encourage to obtain the Consultant’s CADD Support Package which contains

the electronic drawing template in AutoCAD that matches this CADD standard.

2.6. REQUEST FOR WAIVER

Please note: Waivers need to be submitted only for standards documented in Section 4 Data

Standards and Specifications. Section 5 Graphic Standards and Specifications are recommended

practices where deviations may be negotiated with the Aviation Project Manager directly.

Situations may arise where data should be created for the Aviation Department GIS that would not be

consistent with this standard. If such a situation were to arise, the party creating the data must request a

waiver to this standard. The request must define the specific section of the standard for which the waiver

is requested, the reason for the waiver, the resulting impacts on the use of the data in the GIS, and any

alternative approaches that should be considered. The request will also include a detailed description of

the business need for the waiver request and why adherence to this standard will prevent satisfaction of

the business need. The Aviation Department must approve any waiver request before such data can be

submitted.

2.7. DOCUMENT ORGANIZATION

This document is organized as follows:

1. Revision History and Change Control.

2. Introduction – discusses the purpose of and how the CADD/BIM Data Standards document is

organized.

3. Overview of CADD/BIM Standards – describes the background behind the development of the

CADD/BIM Data Standards.

4. Data Standards and Specifications – documents the City of Phoenix Aviation Department

CADD/BIM Standards related to data structure and format. These standards are required to be

followed unless a waiver has been granted.

5. Graphic Standards and Specifications – documents the City of Phoenix Aviation Department

CADD/BIM Standards related to graphic appearance and data organization. These standards are

suggested to be followed if possible.

Appendix A – Phoenix Aviation Department CADD/BIM Layer/Level Standards


3. OVERVIEW OF CADD/BIM STANDARDS

3.1. ACQUIRING AND APPLYING THE STANDARDS

At the beginning of any design process that will result in the creation of CADD and/or BIM drawings, the

SO must obtain the latest version of this standard and the associated electronic drawing template files

(Consultant’s CADD Support Package) from the Aviation Department. The SO will use this standard

when creating all CADD/BIM data for the design project. As part of the technical review of all projects,

the Aviation Department will review delivered drawings and data files for compliance with these

standards. CADD/BIM files that do not meet this standard may be rejected by the Aviation Department

and will need to be re-submitted until it meets that standards listed and is accepted by the Aviation

Department.

The SO will acknowledge their understanding of the requirements of the CADD/BIM Data Standards and

their commitment to them via a formal letter to the Aviation Department Project Manager within 30 days

of the initiation of the project.

Prior to construction, all drawings must be provided to the Aviation Department in accordance with the

Arizona Code, Title 4, Chapter 30, Section R4-30-304. Record Drawings must also be provided at the

conclusion of construction as indicated in the contract.

3.2. CONSULTANT’S CADD SUPPORT PACKAGE

The City of Phoenix has developed a set of CADD template files to assist design consultants who are

using CADD in complying with these standards. The Consultant’s CADD Support Package consists of

the following items for both AutoCAD and MicroStation:

• Blocks and Symbols

• Border Sheets

• Line Styles

• Patterns

• Plot Styles

• Standards Checker Files

• Templates

The design consultant must obtain the latest Consultant’s CADD Support Package CD from the Aviation

Department prior to beginning CADD/BIM Design work. Use of the Consultant’s CADD Support

Package is recommended to facilitate development of CADD/BIM drawings that meet the City’s

Standards.

3.3. UPDATE PROCESS

The standards described in this document may be updated from time to time in accordance with the needs

of the Aviation Department. Recommendations for improvements are encouraged from all parties that

may create CADD/BIM files and data. Any recommendations should be submitted to the Aviation

Department’s Project Manager, so they can be forwarded to the appropriate group for consideration.


3.4. CADD/BIM STANDARDS LINEAGE

The Aviation Department CADD/BIM Data Standards were created by incorporating elements of the

following documents:

• Federal Aviation Administration Advisory Circular 150/5300-18 (General Guidance and

Specifications for Submission of Aeronautical Surveys to NGS: Field Data Collection and

Geographic Information System (GIS) Standards). These standards are based on the Spatial Data

Standards for Facilities, Infrastructure and Environmental (SDSFIE) and have been expanded to

better facilitate use at aviation facilities. They tend to focus on exterior (outside the building) features

and are typically lacking for interior features. Refer to

http://www.faa.gov/airports_airtraffic/airports/resources/advisory_circulars/media/150-5300-

18A/150_5300_18a.pdf

• Architectural, Engineering and Construction (A/E/C) CADD Standard. These standards,

available at https://cadbim.usace.army.mil/default.aspx?p=s&t=18&i=17, are derived from standards

developed by the American Institute of Architects (AIA), the National Institute of Building Sciences

(NIBS) and others which together form the U.S. National CAD Standards

(http://www.nationalcadstandard.org). The A/E/C Standards also contain specifications for exterior

features but do not tend to focus on later incorporation into a Geographic Information System (GIS)

nor do they incorporate specifications for features that are of particular importance to aviation

facilities. However, they do provide excellent specifications for interior features.

• City of Phoenix CAD Standard. A requirement of the GIS Implementation Project is to adhere to

already developed standards at the City of Phoenix. The City’s CAD Data Standards generally adhere

to A/E/C Standards and have been incorporated into the Aviation Department CADD Data Standards

accordingly.

• Spatial Data Standards for Facilities, Infrastructure and the Environment, (SDFIE) as

developed and maintained by the Department of Defense’s CADD/GIS Technology Center at:

https://cadbim.usace.army.mil/default.aspx?p=s&t=15&i=5

3.5. INTERCHANGEABLE TERMINOLOGY

These standards address both Autodesk AutoCAD and Bentley MicroStation CADD systems. Table 1.

AutoCAD versus MicroStation Interchangeable Terminology outlines some terminology differences

between AutoCAD and MicroStation. The first two columns list the term used in each system, and a

common definition is listed in the third column.

Table 1. AutoCAD versus MicroStation Interchangeable Terminology

AutoCAD MicroStation Definition

64-bit floating point d/b Integer d/b The method for storing drawing attribute data.

Memory-based Disk-based Where drawing data are stored until the active file is closed.

User Coordinate System (UCS)

Auxiliary Coordinate System (ACS) An XYZ coordinate system where the origin is selected by the user.

Current Active File or object in use.


Table 1. AutoCAD versus MicroStation Interchangeable Terminology

AutoCAD MicroStation Definition

Block Cell Single or multiple entities grouped together to create a single element.

Dimensions styles Dimension attributes Controls the appearance of dimension elements.

.dwg .dgn A DOS-based extension for drawing files.

Explode Drop Converts an element into multiple entities.

Dragmode/rubberbanding Dynamic update

Display of element(s) being drawn or modified as pointer/cursor moves on the screen.

Entity Element A single object contained in a drawing.

Zoom all Fit Displays all graphics currently in the drawing file.

World Coordinate System/Origin

Global origin/design cube

Defines the location(s) of all entities in a design/drawing using the Cartesian coordinate system.

Select/pick Identify/accept Entity or entities chosen for manipulation or modification.

Slide Image A screen capture of graphics in raster format.

Command prompt Key entry field Allows for keyboard input from users.

Object snap (Osnap) Key point snap Controls the selection location for entities.

Layers Levels Used as transparent overlays for display graphics.

Linetype Line style Defines the appearance of lines.

Polyline Linestring Connected line segments.

Pickbox Locate tolerance Identification/selection limits for the drawing cursor.

ARX/AutoLISP MDL/Visual BASIC System-specific command language.

Status line Message field Displays current drawing status and/or text output from the application.

Insertion point Monument point Benchmark point used to place objects in a drawing.

Move Move element Relocation of entities.

Hatching Patterning To fill an area within a drawing with a symbolic texture.

Coordinate entry Precision key in User-defined XYZ values.

External reference Reference file A design/drawing file attached to an active drawing.

Prototype drawing Seed file A drawing design template file.

Pointing/pick point Tentative/Data point A point within the drawing selected using a pointing device.

Redraw/Regenerate Update Refreshes screen display.

3.6. DIVISION OF STANDARDS

The standards described below have been divided into two sections.


Section 4 - Data Standards and Specifications. This section documents the City of Phoenix Aviation

Department CADD/BIM Standards related to data structure and format. These standards define the data

that can be used to update the GIS database. These standards are required to be followed unless a waiver

has been granted.

Section 5 - Graphic Standards and Specifications. This section documents the City of Phoenix

Aviation Department CADD/BIM Standards related to graphic appearance and data organization. These

standards are suggested guidelines whereby deviations may be negotiated with the Aviation Project

Manager.


4. DATA STANDARDS AND SPECIFICATIONS

4.1. INTRODUCTION

All of the provisions contained in this section are expected to be followed by the SO in developing design

information. If the SO feels that it cannot effectively comply with a provision in this section, it should

submit a waiver request as described in Section 3.

4.2. HARDCOPY PLOTS

Hardcopy plots of the construction documents and record drawings must be provided to the City as

defined in the contract between the City and SO as required by Arizona State Law.

4.3. SCANNED IMAGE DRAWING FILES

Plotted, scanned images of each final drawing file must be provided for incorporating into the City’s

document management system. These drawings must be provided in TIFF or PDF format. Naming

conventions for these files must follow those defined for sheet drawing files below. The files must be

scanned so that they comply with the following requirements.

4.3.1. Scanned Image File Requirements

• All image files will be scanned at a minimum resolution of 200 dots per inch. Unless required for

clarity, files should not be scanned at a resolution greater than 300 dots per inch.

• All image files must be rotated correctly.

• All areas of the image must be clear and complete. All text must be legible.

• All image files must include all required professional seals, signatures, etc.

4.4. CADD/BIM SOFTWARE DRAWING FILES

Drawing files in the native format of the CADD/BIM package must be provided. All drawing files must

be created using the currently shipping and supported software versions of commercial off-the-shelf

CADD/BIM software packages. If the SO wishes to submit drawings in another version, then a request

for waiver must be submitted. The following software products are approved:

• AutoCAD. Note that it is acceptable to utilize companion products such as AutoCAD Map and Land

Development Desktop.

• MicroStation. Note that it is acceptable to utilize companion products such as MicroStation

Geographics.

• Autodesk Revit. Note that it is acceptable to utilize companion products.


Design data created in any other CADD/BIM products must be exported into a format readable in one of

the approved products with no loss of data.

4.5. LAYER/LEVEL ASSIGNMENTS

4.5.1. Layers/Levels

CADD layers or levels are analogous to overlays in manual drafting systems and serve to separate graphic

elements (lines, shapes, and text) according to the design discipline they represent (Figure 1. Typical

Layers/Levels Contained in a Sheet File).

Figure 1. Typical Layers/Levels Contained in a Sheet File

The types of information represented by individual layers/levels can be grouped into two primary types:

feature-specific information and sheet-specific information (Figure 2. Sheet and Feature-Specific

Information).

• Feature-specific model information represents the physical form of a site, its buildings, and the items

composing a building. This information is often shared between drawings. Examples include walls,

doors, underground utilities, light fixtures, and building outlines. Feature-specific information may be

either literal (e.g., walls) or symbolic (e.g., electrical outlets).


• Sheet-specific information may include notes, annotative symbols, and title blocks. This type of

information will not be shared between drawings. To use and manipulate feature-specific and sheet-

specific information effectively, every layer/level must be defined (standardized) by its name and its

use. For individual features and their layer/level assignments, see Appendix A - Phoenix Aviation

Department CADD Layer/Level Standards.

Figure 2. Sheet and Feature-Specific Information

4.5.1.1. Layer/Level Naming Convention

The layer/level names for the Aviation Department are organized as a hierarchy. Names consist of distinct

subject fields separated by dashes (“-”) for clarity. The sections of a layer/level name are defined as:

Discipline Designator (two-character), Major Group (four-character), and two Minor Groups (four-

characters each). The Discipline Designator, Major Group, and one Minor Group are mandatory fields. A


second minor group is optional and used by the Aviation Department when additional detail is needed to

divide features on a drawing. Submitters may also use the second minor group to establish further

distinctions between layers.

An example of this is a layer/level name such as A-WALL-FULL-EXTR for an architectural exterior full

height wall versus A-WALL-FULL-INTR for an interior full height wall.

The layer/level name format shown here is used by the Aviation Department for the level of detailed

information desired (the Discipline Designator, the Major Group, and one Minor Group). All layers must

be created according to this convention.

Figure 3. Layer/Level Naming Format

4.5.2. CADD Model Files

Model files represent full-size drawings of building elements, systems, or information (e.g., the

mechanical HVAC system, the architectural floor plan, details, sections), and sheet files represent final

plotted sheets. Model files are used as components in creating plotted sheet files. The information

contained within a model file for a discipline may be referenced by other disciplines to create the

particular model files or sheet files for that discipline.

4.5.2.1. Layer/Level Assignment Tables

The layer/level assignment tables in the Phoenix Aviation Department CADD Layer/Level Standards

present the following:

• The layers/levels assigned to each model file.

• A detailed description for each layer/level.

• The suggested presentation graphics associated with each layer/level. This includes the line style,

color, and block/cell if necessary. Note that the suggested graphics may be altered by the Design

Team without the need for a waiver.

4.5.2.2. Annotation Layers/Levels

Note that for every discipline type, there are eight layers/levels that are nearly the same; the only

difference is that the Discipline Designator changes depending on the discipline for a model file type. The

unique function of these eight annotation layers/levels is to contain model-specific information that might

not be required by other disciplines. These layers/levels are as follows with ** representing a Discipline

Designator (e.g., A-, C-):

**ANNO-DIMS—Witness/extension lines, dimension terminators, and dimension text.


**ANNO-KEYN—Reference keynotes with associated leaders.

**ANNO-NOTE—General notes and remarks.

**ANNO-NPLT—Non-plotting graphic information.

**ANNO-PATT—Miscellaneous patterning and hatching.

**ANNO-SYMB—Miscellaneous symbols.

**ANNO-TEXT—Miscellaneous text and callouts with associated leaders.

**ANNO-REFR—An AutoCAD user-specific layer for use in attachment of external references such as

reference files.

4.5.2.3. Demolition Layers/Levels

Demolition can be showing by inserting an X into the second character position of any existing layer

name. For instance if a stretch of asphalt pavement were to be removed, the area to be removed would be

shown on layer:

CX-PVMT-ASPH

These layers/levels should only be used when an Existing/Demolition model file is being created In order

to distinguish items to be demolished from existing items that will remain, those items should be moved

to the Demolition layers/levels. When the Existing/Demolition Plan model file is referenced in a new file

to create the new construction items, the Demolition layers/levels would be turned off.

4.5.2.4. Border Sheets

A model file contains information that can be referenced by other disciplines to create other model files or

final sheet files. A border sheet model file contains border sheet line work, the title block, and project-

specific symbols and text.

Each discipline will use the same border sheet and fill in sheet-specific information within the title block

or revision block prior to printing the final sheet file (e.g., sheet number, designer names).

4.5.2.5. Reference Files (XREFs)

Reference files (external references or XREFs) enable designers to share drawing information

electronically, eliminating the need to exchange hard copy drawings between the design disciplines. The

use of reference files is a key component in the successful use of the layer/level assignments. To create

either a model file or a final sheet file, multiple referenced model files may be required.

Figure 4. Using Referenced Model Files to Build a New Model File without Redundant Effort shows how

a simple Plumbing Piping Plan model file is developed using layers/levels referenced from the Enlarged

Floor Plan model file. These referenced layers/levels show the current locations of walls, toilets, and sinks

placed by the architect. The engineer uses this information to design the piping system required to service

the plumbing fixtures. The architectural floor plan would then be detached and the Plumbing Piping Plan

would be saved as a separate model file.


All reference files should be attached using the appropriate techniques so that the attachments remain if

the files are moved to different systems. Relative paths indicating the directory in which reference files

can be founds should be used as opposed to hard coded paths.

Figure 4. Using Referenced Model Files to Build a New Model File without Redundant Effort

4.5.3. CADD Sheet Files

Sheet files are the final project sheets that are ready to be plotted. A sheet file is an assembly of

referenced model files plus additional sheet-specific information (e.g., north arrows, scales, section cuts,

title block information). All sheet files must be provided with each CADD data delivery. All referenced

files must also be included, and all reference links must be resolved.

4.5.3.1. Layer/Level Assignment Tables

Note that ten layers/levels of the sheet file type for every discipline are the same, with the exception of the

Discipline Designator that changes depending on the discipline for that sheet file type. The unique

function of these ten annotation layers/levels is to contain sheet-specific information. These layers/levels

are as follows with ** representing a Discipline Designator (e.g., A-, C-):

**ANNO-DIMS—Sheet-specific witness/extension lines, dimension terminators, and dimension text.

**ANNO-KEYN—Sheet-specific keynotes with associated leaders.

**ANNO-LEGN—Legends and schedules.

**ANNO-NOTE—Sheet-specific general notes and remarks.

**ANNO-PATT—Sheet-specific patterning and hatching (e.g., keyplan patterning).

**ANNO-REDL—Redlines, markups.

**ANNO-REVS—Revisions, amendments, addenda, and modifications.


**ANNO-SYMB—Sheet-specific symbols (e.g., north arrow, scales).

**ANNO-TEXT—Sheet-specific text and callouts with associated leaders.

**ANNO-REFR—An AutoCAD user-specific layer for use in attachment of external references (i.e.,

reference files).

4.5.3.2. Development of Sheet Files

Referenced model files are used in the construction of sheet files. The SO opens the sheet file type that is

appropriate to his/her discipline then references existing model files. As an example, in order to create a

final Plumbing Plan sheet file (Figure 5. Using Multiple Referenced Feature Files to Build a Sheet File

without Redundant Effort), the engineer would first open/create a new sheet file. The engineer would

reference various model files, such as the Architectural Floor Plan and the Plumbing Piping Plan. The

engineer would have to “turn off” layers/levels within each referenced feature file to achieve the desired

sheet file. Then the Border Sheet feature file would be referenced to fit around the other referenced

feature files. Finally, the ten sheet file layers/levels such as P-ANNO-TEXT would be used to fill in

sheet-specific information (e.g., sheet number, designer name). Once the final sheet file is achieved, the

resulting file is saved (with all reference files attached).

Figure 5. Using Multiple Referenced Feature Files to Build a Sheet File without Redundant Effort

4.5.4. BIM Layers

BIM data, by its very nature, knows what types of features it represents. As a result, a BIM file is

inherently a database of the features of the building, and no standard is needed to define the data layering

within it. However, if a CADD file is exported from a BIM system, it should be exported in such a way as

to conform to the CADD standard as closely as possible.

4.6. STANDARD SYMBOLOGY

A “block” in AutoCAD and a “cell” in MicroStation are groups of graphical elements that can be

manipulated as a single entity. Examples of typical cells/blocks are windows, doors, graphic scale keys,


furniture, etc. The use of such symbology enhances CADD productivity and provides an excellent

opportunity for CADD standardization. Appendix B contains standardized blocks/cells for each layer and

feature type. All named blocks and cells are provided on the Consultant’s CADD Support Package CD.

The standardized blacks/cells in Appendix B and the Consultant’s CADD Support Package that represent

real-world features are to be used wherever possible. If custom blocks/cells are needed to represent real-

world drawing elements not covered in this standard, a request should by submitted to the Aviation

Department. If approved, the custom block/cells must be submitted in electronic form along with the

sheets that use them.

Blocks that are used to represent section callout bubbles or other items used for drawing clarity that do

not represent real world features (e.g. are not intended to be translated into the GIS) are not covered by

this provision and are not restricted.

4.7. SPATIAL COMPLIANCE

4.7.1. Exterior Data

All CADD/BIM drawings that primarily relate to exterior systems shall be submitted in the projection and

coordinate system defined in the Aviation Coordinate System Standards document with two points of

geodetic control for spatial reference. Features in drawing files that are stored in drawing units will be

translated to real world locations. The geodetic control chosen must correspond to existing features in the

Aviation Department GIS. The new structures and features must be geographically registered to the

geodetic control. Acceptable control includes section corners, quarter section corners, and existing airport

monumentation. State Plane coordinates exist for most quarter section corners in Maricopa County and

for all existing monumentation points on airport premises. Control assistance can be obtained from the

Aviation Department. It is a requirement that the control used be referenced and shown in the plan

drawing. If the point of control is located within the project limits it should be symbolically indicated and

annotated in the drawing file. If the nearest control is located well outside of the project area then it

should be tied to one of the other geodetic control points used, and a reference tie annotated and indicated

in the design file. Any land survey information, such as basis of bearings and or any assumptions must be

submitted and annotated on the drawing file.

4.7.2. Interior Data

All CADD/BIM drawings that primarily relate to interior systems shall be submitted using architectural

drawing units. However, for each drawing set, the locations of at least two points of geodetic control must

be shown on an overall plan, and the coordinate values for those points provided for reference. If the

nearest control is located well outside of the project area then it should be tied to one of the other geodetic

control points used, and a reference tie annotated and indicated in the design file. Any land survey

information, such as basis of bearings and or any assumptions must be submitted and annotated on the

drawing file.

4.8. SUBMITTAL COMPLIANCE CHECK PROCESS

4.8.1. CADD/BIM Drawing Files

All CADD/BIM drawings submitted to the City will be checked for compliance with these standards. The

compliance check process seeks to ensure that the formats of the submittals conform to the standards.

The checks include the following activities:


• Each drawing/model will be opened in the native software. Any problem opening the file, missing

reference files, fonts, etc. will be noted.

• Each drawing/model will be checked for extraneous layers, blocks, etc. Any deficiencies will be

noted.

• Each drawing/model will be checked for spatial compliance. Any deficiencies will be noted.

• Randomly selected sheet drawings will be plotted for screen viewing. Any deficiencies will be noted.

• Randomly selected drawings will be reviewed to validate the appropriate data is located on the correct

layer. Any deficiencies will be noted.

• A report will be generated noting the deficiencies. Note that some types of deficiencies will result in

the compliance check process being terminated, and so all checks may not be performed.

If any drawing or model in the submittal fails the process, the submittal, along with the deficiency report,

will be returned to the originator for re-submission.

4.8.2. Scanned Image Drawing Files

All Scanned Image drawings submitted to the City will be checked for compliance with these standards.

The compliance check process will generally include the following activities:

• Randomly selected drawings will be reviewed for the image resolution. Any deficiencies will be

noted.

• Randomly selected drawings will be reviewed for correct rotation. Any deficiencies will be noted.

• Randomly selected drawings will be reviewed for visual clarity and readability. Any deficiencies will

be noted.

• Randomly selected drawings will be reviewed for required professional seals, signatures, etc. Any

deficiencies will be noted.

• A report will be generated noting the deficiencies. Note that some types of deficiencies will result in

the compliance check process being terminated, and so all checks may not be performed.

If any image in the image submittal fails the process, the image submittal, along with the deficiency

report, will be returned to the originator for re-submission.


5. GRAPHIC STANDARDS AND SPECIFICATIONS

5.1. INTRODUCTION

This section defines the graphic standards that are suggested to be used for creating CADD and/or BIM

data. The standards in this section are to be followed where feasible and practical. When following these

standards is not feasible or practical, the design team may collectively decide to deviate from the

standards. It is suggested that any changes that impact the sheet cover page, index page, or title block be

approved by the Aviation Project Manager.

The bulk of the information in this section refers to CADD data. When using BIM, much of it will not be

applicable. However, those sections that are relevant (such as those related to appearance of plotted

sheets) should be treated as applicable to BIM.

5.2. CADD DRAWING FILE ORGANIZATION

Two distinct types of CADD files are addressed in this standard: model files and sheet files. A model file

contains the physical components of an area (pavement, underground utilities) or building (e.g., columns,

walls, windows, ductwork, piping, and so on). Model files are drawn at full scale and typically represent

plans, elevations, sections, etc.

A sheet file is synonymous with a plotted CADD drawing file. A sheet file is a selected view or portion of

the model file(s) within a border sheet.

Figure 6. Sheet File Composition illustrates how different model files are referenced to a sheet file (notice

that the border sheet is always a referenced model file). A sheet file is the combination of referenced

model border file and model feature files with sheet-specific text/symbols, using viewports to create a

final “ready-to-plot” CADD file. A useful American Institute of Architects (AIA) rule of thumb states:

“Model files are always referenced by other files, while sheet files are never referenced by other files.”

Figure 6. Sheet File Composition


5.2.1. Electronic CADD File Naming Conventions

Naming conventions for electronic files allow CADD users to determine the contents of a drawing

without actually displaying the file. They also provide a convenient and clear structure for organizing files

within project directories. CADD files should be named in accordance with the following conventions

where practical.

5.2.1.1. Model File Naming Convention

The model file naming convention (Figure 7. Model File Naming Convention) has four fields. The first

field is used for a 0 to 20-character Project Code. Project codes are assigned by the Aviation Department

on an individual project basis. At the start of a project, the SO must request project code from the

Aviation Department Project Manager. If the SO does not have a current list of SAP location codes, the

SO should also obtain the latest list of location codes. The use of a unique Project Code in the file name

prevents the same file name from existing in different directories.

Following the Project Code, the first two-character field represents the Discipline Designator. The options

for the first character in the Discipline Designator are listed in Table 2. Discipline Designators. The

second character of the Discipline Designator field is always a hyphen (-). The next two-character field

represents the Model File Type (see Table 3. Model File Types). The final six-character field is user

definable.

Figure 7. Model File Naming Convention

Example: The model file name for project number 12345 at Terminal 2 (T2), 1st floor, Architectural

Floor Plan could be:

12345A-FPF1XX.dwg/dgn

where 12345 is the Project Code, A- is the Discipline Designator, FP is the Model File Type (Floor Plan),

and F1 is a user definable set of characters for Floor 1. Since only two user definable characters were

used, the characters XX were added as placeholders in the last two places of the model file name.

Table 2. Discipline Designators

Discipline Designator

General G Hazardous Materials H

Survey/Mapping V

Geotechnical B

Civil C


Table 2. Discipline Designators

Discipline Designator

Landscape L

Structural S

Architectural A

Interiors I

Fire Protection F

Plumbing P

Mechanical M

Electrical E

Telecommunications T

Other Disciplines X

Table 3. Model File Types

Discipline Code Definition

General

BS Border Sheet

KP Keyplan

Hazardous Materials

DT Detail

EL Elevation

LG Legend

PP Pollution Prevention Plan

SC Section

XD Existing/Demolition Plan

Survey/Mapping

AL Existing Airfield Lighting Plan

CP Existing Communication Plan

EU Existing Electrical Utilities Plan

FU Existing Liquid Fuel Utilities Plan

HP Hydrographic Survey Plan

HT Existing HTCW Utilities Plan

IW Existing Industrial Waste Water Plan

LG Legend

NG Existing Natural Gas Utilities Plan

PB Project Boundary

PR Existing Profile

SC Existing Section

SP Survey and Mapping Plan

SS Existing Sanitary Sewer Plan

ST Existing Storm Sewer Plan

WA Existing Domestic Water Plan

Geotechnical

BL Boring Location Plan

LB Boring Log

LG Legend

SH Schedule




Civil

AF Airfield Plan

AM Airfield Pavement Marking Plan

CP Channel Plan

DT Detail

EC Erosion Control Plan

EL Elevation

FU Liquid Fuel Utilities Plan

GP Grading Plan

IP Installation Plan/Base Map

IW Industrial Waste Water Plan

JP Joint Layout Plan

KP Staking Plan

LG Legend

NG Natural Gas Utilities Plan

PL Project Location Map

PR Profile

SC Section

SH Schedule

SP Site Plan

SS Sanitary Sewer Plan

ST Storm Sewer Plan

TS Transportation Site Plan

WA Domestic Water Plan


Landscape

DT Detail

EL Elevation

IP Irrigation Plan

LG Legend

LP Landscape Plan

SC Section

SH Schedule


Structural

3D Isometric/3D

CP Column Plan

DT Detail

EL Elevation

EP Enlarged Plan

FP Framing Plan

LG Legend

NB Non-Building Structures Plan

NP Foundation Plan

SC Section

SH Schedule





Architectural

3D Isometric/3D

AC Area Calculations/Occupancy Plan

CP Reflected Ceiling Plan

DT Detail

EL Elevation

EP Enlarged Plan

FF Floor Finish Plan

FP Floor Plan

GP Graphic Plan

LG Legend

QP Equipment Plan

RP Roof Plan

SC Section

SH Schedule

SP Architectural Site Plan


Interiors

3D Isometric/3D

DT Detail

EL Elevation

EP Enlarged Plan

LG Legend

QP Equipment Plan

RP Furniture Plan

SC Section

SH Schedule

SP Signage Placement Plan

WP System/Prewired Workstation Plan


Fire Protection

DG Diagram

DT Detail

FA Fire Alarm/Detection Plan

FP Fire Suppression Plan

LG Legend

LP Life Safety Plan

SH Schedule


Plumbing

DG Diagram

DT Detail

EL Elevation




EP Enlarged Plan

LG Legend

PP Piping Plan

SH Schedule


Mechanical

3D Isometric/3D

DG Diagram

DT Detail

EL Elevation

EP Enlarged Plan

HP HVAC Plan

HT HTCW Utilities Plan

LG Legend

MD Machine Design Plan

MH Material Handling Plan

PP Piping Plan

QP Equipment Plan

SC Section

SH Schedule

SP Specialty Piping Plan


Electrical

AL Airfield Lighting Plan

AP Auxiliary Power Plan

CP Exterior Communication Systems Plan

DG Diagram

DT Detail

EU Electrical Utilities Plan

GP Grounding System Plan

LG Legend

LP Lighting Plan

PP Power Plan

SH Schedule

SS Special Systems Plan


Telecommunications

DG Diagram

DT Detail

LG Legend

SH Schedule

TP Telephone/Data Plan



5.2.1.1.1. Existing/Demolition Model File Naming

There are instances when a facility is being renovated and the as-built designs need to be revised to show

demolition and new items. These revisions are made on copies of the existing as-built model files.

Original as-built files are never modified when showing demolitions.

A model file type, Existing/Demolition (XD), has been added to the standard to allow SOs to make

revisions to as-built files. This model file type is used to aid SOs in separating existing “to remain” items

from items that will be demolished.

Example: An architect has an existing as-built floor plan model file for Terminal 3, 2nd floor. For the

current project, walls will be demolished and new walls constructed on the second floor. First, a copy

would be made of the original as-built file (12345A-FPF2XX.dwg/dgn), which would be renamed to

67890RENA-XDF2XX.dwg/dgn (67890REN is the Project Code, A- is the Discipline Designator, XD is

the Model File Type (Existing/Demolition), and F2XX are user definable characters (F2=Floor 2)). The

architect would open this file and move all demolition items to the first demolition layer/level at that

layer/level’s correct symbology (if phased demolition is involved, the other layers/levels would be used).

When the new items are drawn, the architect would open a new model file called something like

67890RENA-FPF2XX.dwg/dgn

(67890REN is the Project Code, A- is the Discipline Designator, FP is the Model File Type (Floor Plan),

and F2XX are user definable characters (F2=Floor 2)). The file

67890RENA-XDF2XX.dwg/dgn

would be referenced in with the Demolition layers/levels turned off. The architect would then use the

Floor Plan active layers/levels to construct the new items for that project.

5.2.1.2. Sheet File Naming Convention

The sheet file naming convention (Figure 8. Sheet File Naming Convention) has five fields. The first field

will be used for a 0 to 20-character Project Code (see the Model file naming convention section of this

document). The next two characters are the Discipline Designator with Level 2 Designator (Table 5:

Discipline Designators with Level 2 Designators). The next character is the Sheet Type Designator (Table

6: Sheet Type Designators) followed by a two-character Sheet Sequence Number (01-99). The remaining

three characters are user definable.

Figure 8. Sheet File Naming Convention


Example: The sheet file name for a project at Terminal 4, 1st floor, Quadrant B, Architectural Floor Plan,

sheet sequence 02 could be:

24680A-102F1B.dwg/dgn

where 24680 is the Project Code, A- is the Discipline Designator, 1 is the Sheet Type Designator (Plan),

02 is the Sheet Sequence Number, and F1B is a user definable set of characters for Floor 1, Quadrant B.

Note: If the sheet sequence number goes above 99 sheets for a particular discipline, the first character in

the user definable field will be used to expand the limit of sheets per discipline to 999. However, if more

than 99 sheets are required for one discipline’s drawings, the SO will use the Level 2 Designator in the

Discipline Designator to further subdivide the discipline (see Table 4. Discipline Designators with Level

2 Designators).

Note: When more than one sheet type (such as plan, elevation, and detail) is represented in one sheet file,

the dominant sheet type determines the Sheet Type Designator.

Table 4. Discipline Designators with Level 2 Designators

Discipline Designator Description Content

General

G- All General All or any portion of subjects in the following Level 2 Designators

GI General Informational Drawing index, code summary, symbol legend, orientation maps

GC General Contractual

Phasing, schedules, contractor staging areas, fencing, haul routes, erosion control, temporary and special requirements

GR General Resource Photographs, soil borings

Hazardous Materials

H- All Hazardous Materials

All or any portion of subjects in the following Level 2 Designators

HA Asbestos Asbestos abatement, identification, or containment

HC Chemicals Toxic chemicals handling, removal or storage

HL Lead Lead piping or paint removal

HP PCB PCB containment and removal

HR Refrigerants Ozone depleting refrigerants Survey/Mapping

V- All Survey/Mapping All or any portion of subjects in the following Level 2 Designators

VA Aerial Survey

VF Field Survey

VH Hydrographic Survey

VI Digital Survey

VU Combined Utilities

Geotechnical

B- All Geotechnical

Civil

C- All Civil All or any portion of subjects in the following Level 2 Designators




CD Civil Demolition Structure removal and site clearing

CS Civil Site Plats, dimension control

CG Civil Grading Excavation, grading , drainage, erosion control

CP Civil Paving Roads, driveways, parking lots

CI Civil Improvements Pavers, flagstone, exterior tile, furnishings, retaining walls, and water features

CT Civil Transportation Waterways, wharves, docks, trams, railways, airfields, and people movers

CU Civil Utilities

Water, sanitary sewer, storm sewer, power, communications, fiber optic, telephone, cable television, natural gas, and steam systems

Landscape

L- All Landscape All or any portion of subjects in the following Level 2 Designators

LD Landscape Demolition Protection and removal of existing landscaping

LI Landscape Irrigation

LP Landscape Planting Structural

S- All Structural All or any portion of subjects in the following Level 2 Designators

SD Structural Demolition Protection and removal

SS Structural Site

SB Structural Substructure Foundations, piers, slabs, and retaining walls

SF Structural Framing Floors and roofs

Architectural

A- All Architectural All or any portion of subjects in the following Level 2 Designators

AD Architectural Demolition Protection and removal

AS Architectural Site

AE Architectural Elements General architectural

AI Architectural Interiors

AF Architectural Finishes

AG Architectural Graphics Interiors

I- All Interiors All or any portion of subjects in the following Level 2 Designators

ID Interior Demolition

IN Interior Design

IF Interior Furnishings

IG Interior Graphics Murals and visuals

Fire Protection

F- All Fire Protection All or any portion of subjects in the following Level 2 Designators

FA Fire Detection and Alarm




FX Fire Suppression Fire extinguishing systems and equipment

Plumbing

P- All Plumbing All or any portion of subjects in the following Level 2 Designators

PD Plumbing Demolition Protection, termination, and removal

PS Plumbing Site Extensions and connections to Civil Utilities

PP Plumbing Piping Piping, valves, and insulation

PQ Plumbing Equipment Pumps and tanks

Mechanical

M- All Mechanical All or any portion of subjects in the following Level 2 Designators

MD Mechanical Demolition Protection, termination, and removal

MS Mechanical Site Utility tunnels and piping between facilities

MH Mechanical HVAC Ductwork, air devices, and equipment

MP Mechanical Piping Chilled and heated water, steam

MI Mechanical Instrumentation Instrumentation and controls

Electrical

E- All Electrical All or any portion of subjects in the following Level 2 Designators

EA* Electrical Airfield Lighting and Navaids Visual air navigation systems

ED Electrical Demolition Protection, termination, and removal

ES Electrical Site Exterior electrical systems (power, lighting, telecommunications, auxiliary)

EP Electrical Interior Power Interior power

EL Electrical Interior Lighting Interior lighting

EI Electrical Instrumentation

Controls, relays, instrumentation, and measurement devices

ET Electrical Interior Telecommunications

Interior telecommunications (telephone, network, voice and data cables)

EY Electrical Interior Auxiliary Systems

Interior auxiliary (alarms, nurse call, security, CCTV, PA, music, clock, and program)

Telecommunications

T- All Telecommunications

All or any portion of subjects in the following Level 2 Designators

TD Telecommunications Demolition Protection, termination, and removal

TN Data Networks Network cabling and equipment

TT Telephone Telephone systems, wiring, and equipment

Other Disciplines X


Table 5. Sheet Type Designators

Sheet Type Designator

General (symbols legend, notes, etc.) 0

Plans (horizontal views) 1

Elevations (vertical views) 2

Sections (sectional views) 3

Large Scale Views (plans, elevations, or sections that are not details)

4

Details 5

Schedules and Diagrams 6

User Defined 7

User Defined 8

3D Representations (isometrics, perspectives, photographs)

9

5.2.2. Electronic CADD File Organization

Drawing sets must be organized into a logical directory structure so that the Aviation Department will be

able to locate the design files. For most projects, one of the suggested directory structures for electronic

files are shown below will be suitable. Figure 9. Example Drawing File Organization Options illustrates

an example project directory structure using both Option #1 on the left and Option #2 on the right.

Option #1

• Project Name

- Exterior – drawings related to exterior design and construction

- Interior – drawings related to interior design and construction

� Facility Name – e.g. T2 for Terminal 2

• Floor – e.g. F1 for Floor 1

o Folders for each discipline – ARCH, CIVIL, ELEC, etc.

- Sheets – sheet files comprising the plan set. Model files should be referenced from the

appropriate directories above.

Option #2

• Project Name

- Discipline – drawings related to interior design and construction

Individual sheet and model files, as well as externally referenced drawings should be

included at the same level under the discipline sub-

� Details – Should include any detail drawings (e.g. roof details) related to the sheet

and model files contained in the parent directory.


Figure 9. Example Drawing File Organization Options

Option #1 Option #2


5.2.3. Coordination between File Name and Drawing Sheet Number

In assigning a sheet identifier (for use in the sheet title block, reference bubbles, etc.), the SO will

coordinate with the name assigned to the electronic model file. As shown in Figure 10. Typical Border

Sheet Title Block with Sheet Identification Block, the sheet identifier will consist of the discipline

designator, sheet type designator, and the sheet sequence number. Typically, drawing sheet numbers are

limited to 6 characters but more may be needed for large projects. The first character is for the single

character Discipline Designators listed in Table 3 or alternatively the 2 character Level 2 Discipline

Designators listed in Table 5. The next character is for the numerical Sheet Type Designator listed in

Table 6. The last three characters are for the sequential sheet number, with zeros preceding one or two

digit numbers (i.e. 001 and 010).

Figure 10. Typical Border Sheet Title Block with Sheet Identification Block

5.3. GRAPHIC CONCEPTS

5.3.1. Presentation Graphics

The first step in establishing an effective CADD standard is the development of a uniform approach to

presentation graphics. Presentation graphics typically consist of drawing elements such as lines, arcs,

shapes, text, and their characteristics (line color, line width, and line style). This section presents brief

overviews of the characteristics of suggested presentation graphics and the philosophy used to standardize

them.

5.3.1.1. Line Widths

Varied line widths substantially improve readability of hardcopy CADD drawings. For the majority of

Aviation Department drawings, the five line widths defined in Table 6. Comparison of Line Widths, with

the optional 1.00 mm, 1.40 mm, and 2.00 mm lines, are considered sufficient and should not be expanded

unless an appreciable improvement in drawing clarity or contrast can be realized.


Table 6. Comparison of Line Widths

Line Thickness Technical Pen Designation1 mm in.

MicroStation Line Weight

Fine 0000 0.18 0.007 wt = 0

Thin 000 0.25 0.010 wt = 1

Medium 0 0.35 0.014 wt = 2

Wide 1 0.50 0.020 wt = 3

Extra Wide 2.5 0.70 0.028 wt = 5

Option 1 3.5 1.00 0.040 wt = 7

Option 23 n/a 1.40 0.055 wt = 10

Option 33 n/a 2.00 0.079 wt = 15

The following are typical uses for the line widths shown in Table 6. Comparison of Line Widths:

• Fine (0.18 mm). Fine lines should be used sparingly, mostly for poche/patterning (this line thickness

typically does not reproduce well in blue-line format and/or in photocopies).

• Thin (0.25 mm). Thin lines should be used for depicting dimension lines, dimension leader/witness

lines, note leader lines, line terminators (arrowheads, dots, slashes), phantom lines, hidden lines,

center lines, long break lines, schedule grid lines, and object lines seen at a distance.

• Medium (0.35 mm). Medium lines should be used for depicting minor object lines, dimension text,

text for notes/callouts, and schedule text.

• Wide (0.50 mm). Wide lines should be used for major object lines, cut lines, section cutting plane

lines, and titles.

• Extra wide (0.70 mm). Extra wide lines should be used for minor title underlining, schedule outlines,

large titles, and object lines requiring special emphasis. For very large scale details drawn at 3" = 1' –

0" or larger, the extra wide width should be used for the object lines. Extra wide widths are also

appropriate for use as an elevation grade line, building footprint, or top of grade lines on

section/foundation details.

• Option 1 (1.00 mm). This line weight should be used for major title underlining and separating

portions of drawings.

• Option 2 (1.40 mm). This line weight should be used for border sheet outlines, cover sheet line work,

and as an option for the designer as required.

• Option 3 (2.00 mm). This line weight should be used for border sheet outlines, cover sheet line work,

and as an option for the designer as required.

5.3.1.2. Line Color

The primary reason to use color in CADD drawings is to improve the clarity of the drawing on a

computer monitor. Suggested colors (as documented in the AEC CAD Standards) are shown in Table 7.

Screen Color Comparison.

Note: These colors are best viewed on a monitor with a black background.


Table 7. Screen Color Comparison

Color Number Ratios of RGB, % Color AutoCAD MicroStation Red Green Blue

Blue 5 1 0 0 255

Gray 8 9 128 128 128

Green 3 2 0 255 0

Red 1 3 255 0 0

Yellow 2 4 255 255 0

Magenta 6 5 255 0 255

Cyan 4 7 0 255 255

White 7 0 255 255 255

Note: Color numbers for AutoCAD and MicroStation were taken from default color tables.

5.3.1.3. Hatch Patterns

Hatching applied on pattern layers (i.e. listed in Appendix A with the minor group in the layer name of

PATT) is recommended as a means of filling in areas on CADD drawings. Any hatch pattern can be

used. Care should be taken to ensure that hatch patterns are not so dense that line work or annotations

below or on top of the hatching become unreadable. Screened colors are not permitted as a means of

filling in areas of drawings.

5.3.1.4. Use of Wipeouts in AutoCAD

AutoCAD has a tool that allows a SO to create “wipeouts”. This tool can be used to wipeout background

information under an object to clarify the plotted look. Unfortunately, unfavorable results happen when

creating PDF’s of a drawing that contains wipeouts. Typically the wipeouts get plotted as blackouts.

Due to this problem, wipeouts are not to be used.

Instead, a layer/color combination can be created to be used in place of wipeouts. Choose a previously

non-used color in the color table and set the screening value to 0. Assign that color to the wipeout layer.

The SO can create solid fill hatching on that layer and the result will work like wipeouts. Draworder

commands can be used as needed to generate the desired output.

5.3.1.5. Text Styles/Fonts

Contrasting text styles (or fonts) are used within a drawing to delineate types of information. In Aviation

Department drawings, ideally only the five fonts described below will be used.

• Monotext font. This font creates text characters that are evenly spaced. Monotext font should be used

where text fields need to be aligned such as in schedules or, in some cases, title blocks. In AutoCAD,

use the monotxt font, and in MicroStation, use Font #3.

• Proportional font. This font creates text where the characters are proportionally spaced. It is

appropriate for general notes, labels, or title blocks. In AutoCAD, use the romans (Roman Simplex)

font. In MicroStation, use Font #1.

• Slanted font. A slanted font is used where text needs to be easily distinguished from other text. This

font can be created in AutoCAD by using the romans font with the Obliquing Angle set to 21.8 deg to

achieve the American Standard slope of 2 in 5 (68.2 deg). In MicroStation, use Font #23.


• Filled font. Filled fonts are used primarily for titles and on cover sheets. For AutoCAD, the

recommended font is the swiss TrueType font (Note: The TEXTFILL system variable needs to be set

to “1”). MicroStation users should use Font #43 (the Microsoft arialbd.ttf font file can be used as an

alternate text style for the filled font).

• Outline font. When a pen plotter is used for final output, the outline font is used as a substitute for

filled fonts for major titles, such as cover sheet information, to save plotting time. For AutoCAD, the

recommended font is the sasb (Sans Serifbold) PostScript font. For MicroStation, use Font #42.

5.3.1.6. Plotting

Printers and plotters are controlled by files called pen tables or feature tables. These files (tables) convert

thicknesses and/or color in an electronic file to line thicknesses on a paper drawing. By employing pen

tables, the SO can ensure that consistent drawings are produced from an electronic file regardless of the

type of printer or plotter used. Suggested standard pen tables have been provided as part of the

consultant’s package.

5.3.2. Border Sheets

5.3.2.1. Standard Sheets

Standardized versions of standard Cover sheets, Index sheets, and Borders with Title Blocks are included

in the Consultant’s CADD Support Package and should be requested by the SO at the beginning of work

on each design project.

5.3.2.2. Sheet Sizes

Except as noted below, all CADD drawings for a project will be prepared on A1 sheets in accordance

with the ISO sheet size shown in Table 8. ISO, ANSI, and Architectural Sheet Size Comparison, which

also shows American National Standards Institute (ANSI) equivalents. The ISO A0 sheet is

recommended for large maps (for example, airport master plans and drawings for civil works projects).

All documents that are not engineering drawings will be prepared on ISO A4 sized sheets. The sheet

sizes to be used on specific projects should be established in conjunction with the Aviation Department

Project Manager for each project. Smaller sheet sizes may be used in certain circumstances if specified in

writing by the Aviation Department.

Table 8. ISO, ANSI, and Architectural Sheet Size Comparison

Width Length ANSI Equivalent Architectural Equivalent ISO Designation mm in. mm in. Letter in. Letter in.

NA NA NA NA NA F 28.0 x 40.0 F 30.0 x 42.0

A0 841 33.11 1189 46.81 E 34.0 x 44.0 E 36.0 x 48.0

A1 594 23.39 841 33.11 D 22.0 x 34.0 D 24.0 x 36.0

A2 420 16.54 594 23.39 C 17.0 x 22.0 C 18.0 x 24.0

A3 297 11.69 420 16.54 B 11.0 x 17.0 B 11.0 x 17.0

A4 210 8.27 297 11.69 A 8.5 x 11.0 A 8.5 x 11.0

Note: SOs plotting A1 size drawings on ANSI D-size paper should reduce the width of the A1 border from

594 mm (23.39 in.) to 559 mm (22.0 in.). The length can remain the same. This revised border will fit on

an ANSI D-size sheet (22 by 34 in.) and can be reproduced on standard office photocopiers.


5.3.2.3. Cover and Index Sheets

Each set of drawings will include a cover sheet and one or more index sheets (these may be combined for

small drawing sets). The content and layout of the cover and index sheets is project specific. All text

provided on the cover and index sheets must be of such size that it will be legible if the drawings are

reduced to ½ size.

5.3.2.4. Typical Sheet Title Block

A vertical title block will be placed in the right-hand margin of the border sheet of a typical drawing as

shown in Figure 11. Vertical Title Block. Each title block will include the following data:

• Designer identification block

• Issue block

• Management block

• Sheet title block

• Sheet identification block

• Sensitive Security Information warning (per 49 CFR Part 1520)

• Disclaimer (per City of Phoenix Ordinance G-4396)

DESIGNER

IDENTIFICATION

BLOCK

PROJECT

INFORMATION

AREA

Designed by:

Drawn by:

Checked by:

Date:

Dwg scale:

CIP No.:

Sheet Overview Title

SHEET TITLE

AREA

NO.

REVISIONS / SUBMISSIONS

DATE

xxxx

xx / xx / xxx

Figure 11. Vertical Title Block

5.3.2.4.1. Issue Block

The issue block (Figure 12. Issue Block) contains a history of revisions, addenda, and/or clarifications to

the sheet. The first entry should be placed on the lower left-hand line of the issue block and subsequent

entries should be made above it.

Issue block

Designer identification block

Management block

Sheet title block

Sheet identification block


Figure 12. Issue Block

5.3.2.4.2. Designer Identification Block

The designer identification block (Figure 13. Designer Identification Block) contains the logo or name of

the agency that designed the sheet. This space will also accommodate professional seals when required.

Figure 13. Designer Identification Block

5.3.2.4.3. Management Block

The management block consists of two sections: the project information section (Figure 14. Project

Information Section (Management Block), and the drawing information section (Figure 15. Drawing

Information Section (Management Block). The project information section contains the Aviation

Department logo and basic project information. The drawing information section contains information

about the designer (i.e. the individual who prepared the drawing), reviewer (i.e. the individual who

reviewed the drawing), and submitter (i.e. the person who submitted the drawing to the Aviation

Department and is ultimately responsible for its content). This block will be used to maintain filing

information about the drawing, such as the date, drawing scale, and CIP number.


Figure 14. Project Information Section (Management Block)

Designed by:

Drawn by:

Checked by:

Date:

Dwg scale:

CIP No.:

Figure 15. Drawing Information Section (Management Block)

5.3.2.4.4. Sheet Title Block

The sheet title block (Figure 16. Sheet Title Block) contains a description of the content of the sheet (for

example, Architectural Floor Plan). If more than one type of information is presented on the sheet (such

as plans, schedules, and details), the most important information is identified.


Figure 16. Sheet Title Block

5.3.2.4.5. Sheet Identification Block

The sheet identification block (Figure 17. Sheet Identification Block) contains the sheet identifier. The

sheet identifier is comprised of the discipline designator, the sheet type designator, and the sheet sequence

number as described in the Electronic File Naming Conventions section of this document. The sheet

number listing can contain either the total number of sheets for the entire project drawing set or the

number of sheets for that particular discipline designator. This block is intentionally rotated to be

horizontal so that it can be easily referenced from either direction.

Figure 17. Sheet Identification Block

5.3.2.4.6. Use of Blocks to Store Attributes about the Sheet

Drawing submitters are permitted to establish AutoCAD blocks (or MicroStation Cells) which contain

attributes for the border sheet items described above. This provides an efficient way to change the

graphical elements described above when the values of attributes such as sheet number and title change.

5.3.3. Drawing Scales

Typical drawing scales for both SI and inch-pound measurements are indicated in Table 9. Drawing

Scales.

Table 9. Drawing Scales


Drawing Type Metric Inch-Pound

1:200 1" = 20' - 0"

1:400 1" = 30' - 0"

1:500 1" = 40' - 0"

1:600 1" = 50' - 0"

1:700 1" = 60' - 0"

1:1000 1" = 100' - 0"

1:2000 1" = 200' - 0"

1:5000 1" = 400' - 0"

1:6000 1" = 500' - 0"

1:10000 1" = 1000' - 0"

Site plans

1:20000 1" = 2000' - 0"

1:50 ¼”=1’ – 0”

1:100 1/8" = 1' - 0"

Floor plans

1:200 1/16" = 1' - 0"

1:50 ¼”=1’ – 0”

1:100 1/8" = 1' - 0"

Reflective ceiling plans

1:200 1/16" = 1' - 0"

Roof plan 1:200 1/16" = 1' - 0"

1:200 1/16" = 1' - 0" Exterior elevations

1:100 1/8" = 1' - 0"

1:100 1/8" = 1' - 0" Interior elevations

1:50 1/4" = 1' - 0"

1:100 1/8" = 1' - 0"

1:50 1/4" = 1' - 0"

Cross sections

1:200 1/16" = 1' - 0"

Wall sections 1:20 1/2" or 3/4" = 1' - 0"

Stair details 1:10 1" or 1-1/2" = 1' - 0"

1:5 3" = 1' - 0" Details

1:10 1" or 1-1/2" = 1' - 0"


APPENDIX A - PHOENIX AVIATION DEPARTMENT CADD LAYER/LEVEL STANDARDS Above, *** indicates 'PHX' for airport owned or the IATA code for the airline owner

Layer/Level Name Description Line Type

A-ANNO-DIMS Witness/Extension Lines, Dimension Terminators, Dimension Text CONTINUOUS

A-ANNO-KEYN Reference Keynotes with Associated Leaders CONTINUOUS

A-ANNO-LEGN Legends and Schedules CONTINUOUS

A-ANNO-MATC Match Lines CONTINUOUS

A-ANNO-NOTE General Notes and Remarks CONTINUOUS

A-ANNO-NPLT Non-plotting Graphic Information CONTINUOUS

A-ANNO-PATT Miscellaneous Patterning and Hatching CONTINUOUS

A-ANNO-REDL Redlines and Markups CONTINUOUS

A-ANNO-REFR Reference files CONTINUOUS

A-ANNO-REVS Revision Clouds and Symbols CONTINUOUS

A-ANNO-SITE-OTLN Key Plan CONTINUOUS

A-ANNO-SYMB Miscellaneous Symbols CONTINUOUS

A-ANNO-TEXT Miscellaneous Text and Callouts with Associated Leaders CONTINUOUS

A-ANNO-TTLB Title Block CONTINUOUS

A-AREA-IDEN Room numbers, tenant identifications, area calculations CONTINUOUS

A-AREA-LINE Area Calculation Boundary CONTINUOUS

A-AREA-OCCP Occupant or employee names CONTINUOUS

A-AREA-PATT Area cross hatching CONTINUOUS

A-BAGS-BELT Baggage system belt CONTINUOUS

A-BAGS-BGRD Baggage system belt guard CONTINUOUS

A-BAGS-BTRK Baggage system belt track CONTINUOUS

A-BAGS-CARR Baggage system claim carousel CONTINUOUS

A-BAGS-CART-RACK Baggage Cart Rack CONTINUOUS

A-BAGS-CATH Baggage system catwalk hatch CONTINUOUS

A-BAGS-CATW Baggage system catwalk CONTINUOUS

A-BAGS-CHAI Baggage system chain CONTINUOUS

A-BAGS-CHAN Baggage system channel CONTINUOUS

A-BAGS-CONV Baggage Conveyor CONTINUOUS

A-BAGS-CVFL-I*** Baggage system conveyor, at floor, Inbound CONTINUOUS

A-BAGS-CVFL-O*** Baggage system conveyor, at floor, Outbound CONTINUOUS



A-BAGS-CVL1-I*** Baggage system conveyor, 1st level below, Inbound CONTINUOUS

A-BAGS-CVL1-O*** Baggage system conveyor, 1st level below, Outbound CONTINUOUS

A-BAGS-CVL2-I*** Baggage system conveyor, 2nd level below, Inbound CONTINUOUS

A-BAGS-CVL2-O*** Baggage system conveyor, 2nd level below, Outbound CONTINUOUS

A-BAGS-CVL3-I*** Baggage system conveyor, 3rd level below, Inbound CONTINUOUS

A-BAGS-CVL3-O*** Baggage system conveyor, 3rd level below, Outbound CONTINUOUS

A-BAGS-CVU1-I*** Baggage system conveyor, 1st level above, Inbound CONTINUOUS

A-BAGS-CVU1-O*** Baggage system conveyor, 1st level above, Outbound CONTINUOUS

A-BAGS-CVU2-I*** Baggage system conveyor, 2nd level above, Inbound CONTINUOUS

A-BAGS-CVU2-O*** Baggage system conveyor, 2nd level above, Outbound CONTINUOUS

A-BAGS-CVU3-I*** Baggage system conveyor, 3rd level above, Inbound CONTINUOUS

A-BAGS-CVU3-O*** Baggage system conveyor, 3rd level above, Outbound CONTINUOUS

A-BAGS-DCUR Baggage handling system draft curtain CONTINUOUS

A-BAGS-EQPM Baggage handling system equipment, not classified CONTINUOUS

A-BAGS-MCPP Baggage handling system motor control panel CONTINUOUS

A-BAGS-MOTR Baggage handling system motor CONTINUOUS

A-BAGS-SECD Baggage handling system security device CONTINUOUS

A-BAGS-SORT Baggage handling system sorting device CONTINUOUS

A-CHEM-EQPM Chemical Analyzer CONTINUOUS

A-CLNG-ACCS Access panels CONTINUOUS

A-CLNG-CTLJ Ceiling control joints CONTINUOUS

A-CLNG-GRID Ceiling Tile Support CONTINUOUS

A-CLNG-LEVL Level Changes CONTINUOUS

A-CLNG-OPEN Openings, ceiling/roof penetrations (see also A-FLOR-OVHD) CONTINUOUS

A-CLNG-PATT Ceiling Elements (Patterns) CONTINUOUS

A-CLNG-REFL Reflective Ceiling CONTINUOUS

A-CLNG-SOFT Structures Above Soffits CONTINUOUS

A-CLNG-SUSP Suspended elements CONTINUOUS

A-CLNG-TEES Main tees CONTINUOUS

A-CLNG-TYPE Ceiling Type Boundary CONTINUOUS

A-COLS-ENCL Column enclosures/fire protection CONTINUOUS

A-DETL-GRPH Graphics, gridlines, non-text items CONTINUOUS

A-DETL-INPD Inch-pound-specific dimensions and notes CONTINUOUS

A-DETL-METR Metric-specific dimensions and notes CONTINUOUS

A-DOOR-BIFD Bifold Door - Double CONTINUOUS



A-DOOR-BRDG Boarding Gate CONTINUOUS

A-DOOR-COIL Coil-up Door CONTINUOUS

A-DOOR-DBLE Double Door CONTINUOUS

A-DOOR-FULL Full height (to ceiling) door: swing and leaf CONTINUOUS

A-DOOR-IDEN Door number and symbol, hardware group, etc. CONTINUOUS

A-DOOR-ORHD Overhead Door CONTINUOUS

A-DOOR-PRHT Partial height door: swing and leaf CONTINUOUS

A-DOOR-ROTA Rotating Door CONTINUOUS

A-DOOR-SECR Security Door CONTINUOUS

A-DOOR-SING Single Door CONTINUOUS

A-DOOR-SLID Sliding Door CONTINUOUS

A-DOOR-SYMB Miscellaneous door symbols (e.g., overhead, bifold, pocket, etc.) CONTINUOUS

A-ELEV-CASE Wall-mounted casework CONTINUOUS

A-ELEV-FIXT Miscellaneous fixtures CONTINUOUS

A-ELEV-FNSH Finishes, woodwork and trim CONTINUOUS

A-ELEV-IDEN Component identification numbers CONTINUOUS

A-ELEV-OTLN Building outlines CONTINUOUS

A-ELEV-PATT Textures and hatch patterns CONTINUOUS

A-ELEV-PFIX Plumbing fixtures CONTINUOUS

A-ELEV-SIGN Signage CONTINUOUS

A-EQPM-ACCS Equipment access CONTINUOUS

A-EQPM-BELW Equipment below Floor CONTINUOUS

A-EQPM-CLRN Equipment clearance CONTINUOUS

A-EQPM-FIXD Fixed equipment CONTINUOUS

A-EQPM-IDEN-EQID Equipment Identifier CONTINUOUS

A-EQPM-JETB Aircraft Jetbridge CONTINUOUS

A-EQPM-MDTR Metal Detector CONTINUOUS

A-EQPM-MOVE Moveable equipment CONTINUOUS

A-EQPM-NICN Not in contract equipment DASHED_SPACED

A-EQPM-OVHD Ceiling Mounted or Suspended Equipment CONTINUOUS

A-EQPM-XRAY X-Ray Equipment CONTINUOUS

A-FLOR-ADAS ADA Min. Space Required CONTINUOUS

A-FLOR-CASE Casework (manufactured cabinets) CONTINUOUS

A-FLOR-COLS Column (not the column enclosure) CONTINUOUS

A-FLOR-ECSL Escalator CONTINUOUS



A-FLOR-EVTR Elevator cars and equipment CONTINUOUS

A-FLOR-EXPJ Expansion and Seismic Joints CONTINUOUS

A-FLOR-FIXT Floor mounted/Free standing miscellaneous fixtures CONTINUOUS

A-FLOR-FURN Furniture Layers CONTINUOUS

A-FLOR-HRAL Stair and balcony handrails, guard rails CONTINUOUS

A-FLOR-IDEN Room name, space identification text CONTINUOUS

A-FLOR-IDEN-RNUM Room Number / Space Identification CONTINUOUS

A-FLOR-LEVL Level changes, shafts, ramps, pits, breaks in construction, etc. CONTINUOUS

A-FLOR-LEVL-RAMP Exterior Stairs / Ramps / Stoops CONTINUOUS

A-FLOR-LOKR Lockers CONTINUOUS

A-FLOR-MWLK Moving Walkway CONTINUOUS

A-FLOR-NUMB Room/space identification number and symbol CONTINUOUS

A-FLOR-NUMB-RMID Room Name / Space Identification Text CONTINUOUS

A-FLOR-OTLN Floor Outline / Perimeter / Building Footprint CONTINUOUS

A-FLOR-OTLN-APRM Aisle Lines CONTINUOUS

A-FLOR-OTLN-RPRM Room Perimeter (Inside Interior walls) CONTINUOUS

A-FLOR-OVHD Overhead items (skylights, overhangs etc.) DASHED

A-FLOR-PATT Paving, tile, carpet patterns CONTINUOUS

A-FLOR-RAIS Access (raised) flooring CONTINUOUS

A-FLOR-SIGN Signage CONTINUOUS

A-FLOR-SIGN-WAYF Wayfinding CONTINUOUS

A-FLOR-SPCE Interior space not delineated by walls CONTINUOUS

A-FLOR-SPCL Architectural specialties (e.g., toilet room accessories, display cases) CONTINUOUS

A-FLOR-SPCL-CASE Display Case (Public Art Displays) CONTINUOUS

A-FLOR-STRS Stair risers/treads, escalators, ladders CONTINUOUS

A-FLOR-STRS-SRLD Stair Tread CONTINUOUS

A-FLOR-STRS-SRLU Stair Direction Line Up CONTINUOUS

A-FLOR-TPTN Toilet Partitions CONTINUOUS

A-FLOR-TYPE Floor Type Boundary CONTINUOUS

A-FLOR-WDWK Architectural woodwork (field built cabinets and counters) CONTINUOUS

A-FURN-ACCS Curtains CONTINUOUS

A-FURN-SEAT Seating CONTINUOUS

A-GLAZ-FULL Full height glazed walls and partitions (see A-WALL-CWMG for curtain walls) CONTINUOUS

A-GLAZ-FULL-EXTR Exterior Window CONTINUOUS

A-GLAZ-FULL-GLLS Glass CONTINUOUS



A-GLAZ-FULL-INTR Interior Window CONTINUOUS

A-GLAZ-FULL-SLHT Sidelight CONTINUOUS

A-GLAZ-FULL-WDOW Window CONTINUOUS

A-GLAZ-FULL-WFIX Fixed 1 Foot Window CONTINUOUS

A-GLAZ-FULL-WNSH Single Hung Window CONTINUOUS

A-GLAZ-IDEN Window number and symbol CONTINUOUS

A-GLAZ-IDEN-WNID Window Identifier CONTINUOUS

A-GLAZ-PRHT Windows and partial height glazed partitions CONTINUOUS

A-GLAZ-SILL Window sills CONTINUOUS

A-LITE-CLNG Specialty ceiling lights not shown on Electrical Lighting Plan CONTINUOUS

A-OTLN-FLOR Floor Level Boundary DASHED_TRIPLICATE-DOTTED A-PENE-FLOR Floor Penetrations DASHED

A-PENE-ROOF Roof Penetrations DASHED

A-PKNG-EQPM-GATE Parking Automatic Gate CONTINUOUS

A-PKNG-EQPM-TCKT Parking Ticket Machine CONTINUOUS

A-PROP-LEAS Lease line (interior) CONTINUOUS

A-ROOF-CRTS Crickets flow arrows flow info CONTINUOUS

A-ROOF-CRTS-SLPE Direction of Line Slope CONTINUOUS

A-ROOF-DRAN Roof Drain CONTINUOUS

A-ROOF-EQPM-OTLN Roof Equipment Outline CONTINUOUS

A-ROOF-EXPJ Expansion joints CONTINUOUS

A-ROOF-GUTR Roof internal gutters CONTINUOUS

A-ROOF-HRAL Stair handrails, nosings, guard rails CONTINUOUS

A-ROOF-LEVL Level changes CONTINUOUS

A-ROOF-OPEN Roof Open Below ('X' line symbol) CONTINUOUS

A-ROOF-OTLN Roof perimeter/edge CONTINUOUS

A-ROOF-PATT Roof surface patterns, hatching CONTINUOUS

A-ROOF-PIPE-MISC Miscellaneous Pipe CONTINUOUS

A-ROOF-RFDR Roof drains CONTINUOUS

A-ROOF-SPCL Roof specialties, accessories, access hatches, dormers CONTINUOUS

A-ROOF-STRS Stair risers/treads, ladders CONTINUOUS

A-ROOF-WALK Roof walkways CONTINUOUS

A-ROOF-WALL Parapet walls and wall caps CONTINUOUS

A-SECT-IDEN Component identification numbers CONTINUOUS

A-SECT-MBND Material beyond section cut CONTINUOUS



A-SECT-MCUT Material cut by section CONTINUOUS

A-SECT-PATT Textures and hatch patterns CONTINUOUS

A-STAT-DEMO-PHS1 Demolition - phase 1 CONTINUOUS



A-TRSH-RECP Trash Receptacle (Big Silver) CONTINUOUS

A-WALL-CAVI Cavity wall lines CONTINUOUS

A-WALL-CNTR Wall centerlines CHAIN

A-WALL-CWMG Curtain wall mullions and glass CONTINUOUS

A-WALL-CWMG-GLLS Glass Block, Large Scale CONTINUOUS

A-WALL-FIRE Fire wall designators (patterning) CONTINUOUS

A-WALL-FULL-EXTR Exterior full height walls CONTINUOUS

A-WALL-FULL-INTR Interior full height walls CONTINUOUS

A-WALL-FUTR Future Walls DASHED_DOTTED

A-WALL-HEAD Door and window headers CONTINUOUS

A-WALL-IDEN Wall identification/type text or tags CONTINUOUS

A-WALL-IDEN-WLID Wall Type Identifier CONTINUOUS

A-WALL-JAMB Door and window jambs CONTINUOUS

A-WALL-MOVE Moveable walls/partitions CONTINUOUS

A-WALL-OPEN-LVRS Louvers CONTINUOUS

A-WALL-PATT Wall insulation, hatching, and fill CONTINUOUS

A-WALL-PRHT Partial height walls CONTINUOUS

A-WALL-SPCL Wall-hung/attached specialties (e.g., fixtures, grab bars (incl. handicap), telephone booths)

CONTINUOUS

B-ANNO-DIMS Witness/extension lines, dimension terminators and text CONTINUOUS

B-ANNO-KEYN Reference keynotes with associated leaders CONTINUOUS

B-ANNO-NOTE General notes and general remarks CONTINUOUS

B-ANNO-NPLT Non-plotting graphic information CONTINUOUS

B-ANNO-PATT Miscellaneous patterning and hatching CONTINUOUS

B-ANNO-REFR Reference files (AutoCAD users only) CONTINUOUS

B-ANNO-SYMB Miscellaneous symbols CONTINUOUS

B-ANNO-TEXT Miscellaneous text and callouts with associated leaders CONTINUOUS

B-BORE-HOLE Bore/perc hole number CONTINUOUS

B-BORE-IDEN Component identification numbers CONTINUOUS

B-BORE-PATT-ROCK Soil/rock patterns CONTINUOUS

B-EXST-BLDG Existing building CONTINUOUS



B-PVMT-OTLN-AGSC Outline - aggregate surface course and gravel CONTINUOUS

B-PVMT-OTLN-FLEX Outline - flexible pavement CONTINUOUS

B-PVMT-OTLN-RIGD Outline - rigid pavement CONTINUOUS

C-AFLD-AHOA Air Operations Area CONTINUOUS

C-AFLD-AIDS-COMM Communications airfield navigational aides CONTINUOUS

C-AFLD-AIDS-CRIT Airfield Navigational Aid - Critical Area CONTINUOUS

C-AFLD-AIDS-GPS GPS airfield navigational aides CONTINUOUS

C-AFLD-AIDS-GPS_ GPS airfield navigational aides CONTINUOUS

C-AFLD-AIDS-ILS Airfield Instrument Landing System CONTINUOUS

C-AFLD-AIDS-ILS_ Airfield Instrument Landing System CONTINUOUS

C-AFLD-AIDS-MCWV Microwave airfield navigational aides CONTINUOUS

C-AFLD-AIDS-OTHR Other airfield navigational aides CONTINUOUS

C-AFLD-AIDS-RADI Radio airfield navigational aides CONTINUOUS

C-AFLD-AIDS-RADR Radar airfield navigational aides CONTINUOUS

C-AFLD-AIDS-RMTE Remote airfield navigational aides CONTINUOUS

C-AFLD-AIDS-SITE Airfield Navigational Aid - Site CONTINUOUS

C-AFLD-AIDS-SYST NAVAID system CONTINUOUS

C-AFLD-AIDS-WTHR Weather airfield navigational aides CONTINUOUS

C-AFLD-ARWY Airway CONTINUOUS

C-AFLD-DSRF-BLDR Building Restriction Line CONTINUOUS

C-AFLD-DSRF-KEYH Key holes CONTINUOUS

C-AFLD-DSRF-NMOV Aircraft Non-Movement Area CONTINUOUS

C-AFLD-DSRF-OFA Object Free Area CONTINUOUS

C-AFLD-DSRF-OFA_ Object Free Area CONTINUOUS

C-AFLD-DSRF-OFZ Object Free Zone CONTINUOUS

C-AFLD-DSRF-OFZ_ Object Free Zone CONTINUOUS

C-AFLD-DSRF-POFA Precision Object Free Area CONTINUOUS

C-AFLD-DSRF-RPZ Runway Protection Zone CONTINUOUS

C-AFLD-DSRF-RPZ_ Runway Protection Zone CONTINUOUS

C-AFLD-DSRF-RSA Runway Safety Area CONTINUOUS

C-AFLD-DSRF-RSA_ Runway Safety Area CONTINUOUS

C-AFLD-FAAR FAA Region CONTINUOUS

C-AFLD-FREQ Frequency Area CONTINUOUS

C-AFLD-PAVE Airfield pavement section CONTINUOUS

C-AFLD-PROP Airport property CONTINUOUS



C-AFLD-SECR-RSTR Military restricted access boundary CONTINUOUS

C-AFLD-SECR-SECA Airfield security area CONTINUOUS

C-AFLD-SECR-SIDA Security Identification Display Area CONTINUOUS

C-AFLD-SECR-STER Airfield sterile area CONTINUOUS

C-AFLD-TRKL Flight Track Line CONTINUOUS

C-AFLD-TRKP Flight Track Point CONTINUOUS

C-AIRS-ISOC Approach surface isoclines CONTINUOUS

C-AIRS-LNDM Landmark segment CONTINUOUS

C-AIRS-OBSC Airfield obstruction CONTINUOUS

C-AIRS-OBST-LINE Airspace obstructions - Line CONTINUOUS

C-AIRS-OBST-POLY Airspace obstructions - Polygon CONTINUOUS

C-AIRS-OBST-PPNT Airspace obstructions - Point CONTINUOUS

C-AIRS-OTHR Other airspace surfaces CONTINUOUS

C-AIRS-PART-APRC FAR Part 77 Approach Surface CONTINUOUS

C-AIRS-PART-CONL FAR Part 77 Conical Surface CONTINUOUS

C-AIRS-PART-HORZ FAR Part 77 Horizontal Surface CONTINUOUS

C-AIRS-PART-PRIM FAR Part 77 Primary Surface CONTINUOUS

C-AIRS-PART-TRNS FAR Part 77 Transitional Surface CONTINUOUS

C-AIRS-TERP TERPS surfaces CONTINUOUS

C-ALGN-DATA Alignment coordinates and curve data CONTINUOUS

C-ALGN-LINE Alignments CONTINUOUS

C-ANNO-DIMS Witness/extension lines, dimension terminators and text CONTINUOUS

C-ANNO-KEYN Reference keynotes with associated leaders CONTINUOUS

C-ANNO-NOTE General notes and general remarks CONTINUOUS

C-ANNO-NPLT Non-plotting graphic information CONTINUOUS

C-ANNO-PATT Miscellaneous patterning and hatching CONTINUOUS

C-ANNO-REFR Reference files (AutoCAD users only, see Chapter 4) CONTINUOUS

C-ANNO-SYMB Miscellaneous symbols CONTINUOUS

C-ANNO-TEXT Miscellaneous text and callouts with associated leaders CONTINUOUS

C-APRN-ACPK Aircraft gate/stand parking area CONTINUOUS

C-APRN-ANOM Aircraft non-movement area CONTINUOUS

C-APRN-CNTR Centerlines CHAIN

C-APRN-CNTR-IDEN Centerline annotation CONTINUOUS

C-APRN-DEIC Aircraft Deicing Area CONTINUOUS

C-APRN-GRND Grounding points CONTINUOUS



C-APRN-HOLD Holding position markings CONTINUOUS

C-APRN-HOLD-AIRF Holding position markings CONTINUOUS

C-APRN-IDEN Annotation CONTINUOUS

C-APRN-JOIN Apron joints CONTINUOUS

C-APRN-MOOR Mooring points CONTINUOUS

C-APRN-MRKG Apron markings CONTINUOUS

C-APRN-OTLN Airfield apron - outlines CONTINUOUS

C-APRN-SECU Security zone markings CONTINUOUS

C-APRN-SHLD Shoulder stripes CONTINUOUS

C-APRN-SHLD-MRKG Shoulder stripes CONTINUOUS

C-APRN-SIGN Airfield signs on the apron CONTINUOUS

C-BLDG-BASE-ELEV Building Base Elevation CONTINUOUS

C-BLDG-IDEN Building Labels CONTINUOUS

C-BLDG-LEGN Building Legend CONTINUOUS

C-BLDG-OTLN Buildings CONTINUOUS

C-BLDG-OVHD Building overhangs CONTINUOUS

C-BLDG-PATT Building hatching and patterns CONTINUOUS

C-BLDG-SECT-HGEX Building Section Height Extras CONTINUOUS

C-BLDG-SECT-HGHT Building Section Height CONTINUOUS

C-BLDG-SPOT Building gspt CONTINUOUS

C-BLDG-STCK Stacks CONTINUOUS

C-BLDG-STCK-HLOC Stack Horizontal Location CONTINUOUS

C-BLDG-STCK-IDEN Stack Number CONTINUOUS

C-BLDG-STCK-RELV Stack Release Elevation CONTINUOUS

C-BORW-IDEN Borrow/Spoil area annotation CONTINUOUS

C-BORW-LINE Borrow/Spoil area DASHED

C-BRDG-CNTR Bridge centerlines CHAIN

C-BRDG-DECK Bridge deck CONTINUOUS

C-BRDG-IDEN Bridge annotation CONTINUOUS

C-BRDG-OTLN Bridge outlines CONTINUOUS

C-CHAN-CNTR Channel centerline and survey report lines DASHED_DOTTED

C-CHAN-CNTR-IDEN Channel centerline and survey report lines - annotation CONTINUOUS

C-CHAN-DACL De-authorized channel limits, anchorages, etc. CONTINUOUS

C-CHAN-DACL-IDEN De-authorized channel limits, anchorages, etc. - annotation CONTINUOUS

C-CHAN-LIMT Channel limits, anchorages, turning basins, disposal areas, etc. CONTINUOUS



C-CHAN-TURN Turning points CONTINUOUS

C-DETL-FENC-SECU Security Fencing FENCE

C-DETL-GRPH Graphics, gridlines, non-text items CONTINUOUS

C-DETL-INPD Inch-pound-specific dimensions and notes CONTINUOUS

C-DETL-METR Metric-specific dimensions and notes CONTINUOUS

C-DOMW-ABND Abandoned Piping DASHED

C-DOMW-ANNO Annotation CONTINUOUS

C-DOMW-DEVC Connectors, faucets, reducers, regulators, vents, intake points, tanks, taps, backflow preventers, and valves

CONTINUOUS

C-DOMW-DEVC-FPIV Water Valve-Fire CONTINUOUS

C-DOMW-DEVC-FSCV Fire Sectional Control Valve CONTINUOUS

C-DOMW-DEVC-WVAL Water Valve CONTINUOUS

C-DOMW-FIRE Fire Lines FIRE

C-DOMW-FTTG-CLNO Cleanout Water CONTINUOUS

C-DOMW-HYDR-HRNT Hydrant CONTINUOUS

C-DOMW-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-DOMW-MAIN Water Main Piping WATERL

C-DOMW-METR-WAME Water Meter CONTINUOUS

C-DOMW-NHYD Non-potable hydrants/flushing hydrants CONTINUOUS

C-DOMW-NPOT Non-Potable Water Piping NONPOT

C-DOMW-PIPE-MISC Miscellaneous Pipe Riser DASHED

C-DOMW-PITS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-DOMW-PUMP-PSTA Pump Station Water CONTINUOUS

C-DOMW-REDC Pressure reducing station CONTINUOUS

C-DOMW-RSVR Reservoirs CONTINUOUS

C-DOMW-SERV Water Service Piping CONTINUOUS

C-DOMW-SIGN Surface Markers/Signs CONTINUOUS

C-DOMW-STNS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-DOMW-TANK Water storage tanks CONTINUOUS

C-DOMW-UTIL-UNKN Unknown Utility DASHED

C-DOMW-VENT Vent pits CONTINUOUS

C-DOMW-VLVE-WVAL Water Valve Vault CONTINUOUS

C-DOMW-WELL Water well houses CONTINUOUS

C-DRED-LIMT Dredge limit lines CONTINUOUS

C-DRED-OHWM Ordinary high water marks CONTINUOUS

C-ELEV-FIXT Miscellaneous fixtures CONTINUOUS



C-ELEV-IDEN Component identification numbers CONTINUOUS

C-ELEV-OTLN Building outlines CONTINUOUS

C-ELEV-PATT Textures and hatch patterns CONTINUOUS

C-ELEV-SIGN Signage CONTINUOUS

C-FUEL-ABND Abandoned piping DASHED

C-FUEL-DEFL Defueling piping CONTINUOUS

C-FUEL-DEVC Air eliminators, filter strainers, hydrant fill points, line vents, markers, oil/water separators, reducers, regulators, and valves

CONTINUOUS

C-FUEL-FLOW Flow direction arrows CONTINUOUS

C-FUEL-FTTG Caps, crosses, and tees CONTINUOUS

C-FUEL-HYDR Hydrant control pits CONTINUOUS

C-FUEL-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-FUEL-JBOX-FOMH Fuel Oil Manhole CONTINUOUS

C-FUEL-MAIN Main fuel piping LIQPET

C-FUEL-METR-FOME Fuel Oil Meter CONTINUOUS

C-FUEL-PITS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-FUEL-PUMP Booster pump stations CONTINUOUS

C-FUEL-SERV Service piping CONTINUOUS

C-FUEL-STNS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-FUEL-TANK Fuel tanks CONTINUOUS

C-FUEL-TRCH Fuel line trench CONTINUOUS

C-FUEL-VENT Vent pits CONTINUOUS

C-FUEL-VLVE Valve pits CONTINUOUS

C-GRAD-EXST Existing grade, ground line CONTINUOUS

C-GRAD-FNSH Finished grade CONTINUOUS

C-GRID-FRAM Frame (bounding frame of an area referenced by a grid) CONTINUOUS

C-GRID-MAJR Major grid lines CONTINUOUS

C-GRID-MINR Minor grid lines CONTINUOUS

C-GRID-TEXT Border text, annotation CONTINUOUS

C-HELI-BLST Blast pad and stopway markings CONTINUOUS

C-HELI-CNTR Centerline markings CONTINUOUS

C-HELI-CNTR-MARK Centerline markings CONTINUOUS

C-HELI-DISP Displaced threshold markings CONTINUOUS

C-HELI-DIST Fixed distance markings CONTINUOUS

C-HELI-DSRF Helipad design surface CONTINUOUS

C-HELI-FATO Helipad FATO CONTINUOUS


Layer/Level Name Description Line Type C-HELI-IDEN Heliport numbers and letters CONTINUOUS C-HELI-SHLD Shoulder markings CONTINUOUS C-HELI-SIDE Side stripes CONTINUOUS C-HELI-TDZM Touchdown zone markers CONTINUOUS C-HELI-THRS Threshold markers CONTINUOUS C-HELI-TLOF Helipad take off and landing area CONTINUOUS C-INDW-ABND Abandoned piping DASHED C-INDW-DEVC-GRIT Grit Chamber Waste CONTINUOUS C-INDW-DEVC-IWME Industrial Waste Meter CONTINUOUS C-INDW-FLOW Flow direction arrows CONTINUOUS C-INDW-FTTG-CLNO Cleanout Waste CONTINUOUS C-INDW-IDEN Identifier tags, symbol modifier, and text CONTINUOUS C-INDW-JBOX-IWMH Industrial Waste Manhole CONTINUOUS C-INDW-LAGN Lagoons CONTINUOUS C-INDW-LIFT Lift stations CONTINUOUS C-INDW-MAIN Main industrial waste water piping IWASTE C-INDW-PLNT Treatment plants CONTINUOUS C-INDW-SERV Industrial waste water service piping CONTINUOUS C-INDW-SIGN Surface markers/signs CONTINUOUS C-INDW-STNS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS C-JOIN-CNSL Construction joints - longitudinal CONTINUOUS C-JOIN-CNST Construction joints - transverse CONTINUOUS C-JOIN-CNTL Contraction joints - longitudinal CONTINUOUS C-JOIN-CNTT Contraction joints - transverse CONTINUOUS C-JOIN-EDGE Thickened edges CONTINUOUS C-JOIN-EXPN Expansion joints CONTINUOUS C-MARK-CROS Landmark, Cross CONTINUOUS C-NGAS-ABND Abandoned piping DASHED C-NGAS-ANNO Annotation CONTINUOUS C-NGAS-DEVC Hydrant fill points, lights, vents, markers, rectifiers, reducers, regulators, CONTINUOUS C-NGAS-DEVC-IDEN Identifier tags, symbol modifier, and text CONTINUOUS C-NGAS-DEVC-MRKR Markers CONTINUOUS C-NGAS-DEVC-VLVE Valve CONTINUOUS C-NGAS-FLOW Flow direction arrows CONTINUOUS C-NGAS-FTTG Caps, crosses, and tees NTGASN



C-NGAS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-NGAS-MAIN Main natural gas piping CONTINUOUS

C-NGAS-METR-GSME Gas Meter CONTINUOUS

C-NGAS-PITS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-NGAS-PUMP Compressor stations CONTINUOUS

C-NGAS-REDC Reducing stations CONTINUOUS

C-NGAS-SERV Service piping CONTINUOUS

C-NGAS-SIGN Surface markers/signs CONTINUOUS

C-NGAS-STNS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-NGAS-VENT Vent pits CONTINUOUS

C-NGAS-VLVE-GSVA Gas Valve Vault CONTINUOUS

C-OBST-AIRS Airspace obstructions CHAIN

C-OBST-AIRS-IDEN Obstruction annotation CONTINUOUS

C-OVRN-CNTR Centerlines CONTINUOUS

C-OVRN-CNTR-AIRF Centerlines CHAIN

C-OVRN-CNTR-IDEN Centerline annotation CONTINUOUS

C-OVRN-IDEN Airfield overrun area - annotation CONTINUOUS

C-OVRN-OTLN Airfield overrun area - outlines CONTINUOUS

C-OVRN-OTLN-AIRF Airfield overrun area - outlines CONTINUOUS

C-OVRN-SHLD Shoulder markings CHAIN

C-OVRN-SHLD-AIRF Shoulder markings CONTINUOUS

C-OVRN-SHLD-MRKG Shoulder markings CONTINUOUS

C-PADS-CNTR Centerlines CONTINUOUS

C-PADS-CNTR-IDEN Centerline annotation CONTINUOUS

C-PADS-IDEN Pads - annotation CONTINUOUS

C-PADS-OTLN Pad outline CONTINUOUS

C-PADS-SHLD Shoulders with annotation CONTINUOUS

C-PKNG-CARS Graphic illustration of cars CHAIN

C-PKNG-CNTR Centerlines CONTINUOUS

C-PKNG-CURB Curbs and gutters CONTINUOUS

C-PKNG-DEVC-GATE Parking Lot Gate CONTINUOUS

C-PKNG-EQPM Parking Equipment (I.e. booths, gates, etc.) CONTINUOUS

C-PKNG-FIXT Parking lot fixtures (e.g., wheel stops, parking meters) CONTINUOUS

C-PKNG-MRKG-FLAR Flow Arrow Right CONTINUOUS

C-PKNG-OTLN Parking lots and minor roads DASHED_SPACED



C-PKNG-SBMP Speed bumps in parking areas CONTINUOUS

C-PRKG-IDEN Parking lot annotation CONTINUOUS

C-PRKG-OTLN Parking lot outlines CONTINUOUS

C-PRKG-SIGN Signs CONTINUOUS

C-PROP-CONS Construction limits/controls, staging area CONTINUOUS

C-PROP-ESMT Easements RTOFWY

C-PROP-IDEN Property annotation CONTINUOUS

C-PROP-LEAS Lease line (exterior / ground lease) CONTINUOUS

C-PROP-RWAY Right of ways CONTINUOUS

C-PVMT-ASPH Pavement - Asphalt CONTINUOUS

C-PVMT-ASPH-AIRF Pavement pattern - asphalt CONTINUOUS

C-PVMT-CONC Pavement pattern - concrete CONTINUOUS

C-PVMT-CONC-AIRF Pavement pattern - concrete CONTINUOUS

C-PVMT-CONC-TRAN Pavement - Concrete CONTINUOUS

C-PVMT-GROV Pavement Grooving CONTINUOUS

C-PVMT-GRVL Pavement - Gravel CONTINUOUS

C-PVMT-GRVL-AIRF Pavement pattern - gravel CONTINUOUS

C-PVMT-IDEN Road, parking lot, railroad, airfield pavement annotation CONTINUOUS

C-PVMT-MRKG Pavement markings and signs CONTINUOUS

C-PVMT-MRKG-WHIT Roadway markings (white) CONTINUOUS

C-PVMT-MRKG-YELO Roadway markings (yellow) CONTINUOUS

C-PVMT-PATT Reinforced pavement pattern CONTINUOUS

C-PVMT-ROAD Roads, parking lots, railroads, airfield pavements CONTINUOUS

C-PVMT-SBMP Speed bumps on roadways CONTINUOUS

C-PVMT-UNPV Unpaved CHAIN

C-RAIL-BRDG Railroad bridge area CONTINUOUS

C-RAIL-BRDG-CNTR Railroad bridge centerline CONTINUOUS

C-RAIL-CNTR Centerlines CONTINUOUS

C-RAIL-CNTR-IDEN Centerline annotation CONTINUOUS

C-RAIL-EQPM-SIGN Rail Signal Equipment CONTINUOUS

C-RAIL-EQPM-SWTC Rail Switch CONTINUOUS

C-RAIL-IDEN Railroad - annotation CONTINUOUS

C-RAIL-IDEN-SIGN Rail Signal Sign CONTINUOUS

C-RAIL-TRAK Railroads CHAIN

C-RAIL-TRAK-RTIE Railroad Tie RAILRD



C-RAIL-YARD Railroad Yard CONTINUOUS

C-ROAD-ASPH Road outlines - asphalt surface CONTINUOUS

C-ROAD-CNTR Centerlines CONTINUOUS

C-ROAD-CNTR-IDEN Centerline annotation CONTINUOUS

C-ROAD-CONC Road outlines - concrete surface CONTINUOUS

C-ROAD-CURB Curbs CONTINUOUS

C-ROAD-DRIV Driveway edge of pavement CONTINUOUS

C-ROAD-DRIV-CNTR Driveway centerline CONTINUOUS

C-ROAD-GRAL Guardrail CONTINUOUS

C-ROAD-GRAL-CNTR Guardrail Centerline GUARD

C-ROAD-GRAL-SYMB Guardrail Symbol CONTINUOUS

C-ROAD-GRVL Road outlines - gravel surface CONTINUOUS

C-ROAD-IDEN Road, curb, and guardrail annotation CONTINUOUS

C-ROAD-OTLN Roads CONTINUOUS

C-ROAD-POIN Road Point CONTINUOUS

C-ROAD-SHLD Roadway shoulder CONTINUOUS

C-ROAD-SIGN Signs CONTINUOUS

C-ROAD-UPVD Road outlines - unpaved surface CONTINUOUS

C-RUNW-ARST Runway arresting area CONTINUOUS

C-RUNW-BLST Blast pad and stopway markings CHAIN

C-RUNW-CLRW Runway clearway CONTINUOUS

C-RUNW-CNTR Centerline markings CONTINUOUS

C-RUNW-CNTR-AIRF Centerlines CHAIN

C-RUNW-CNTR-MARK Centerline markings CONTINUOUS

C-RUNW-CNTR-MRKG Centerline markings CONTINUOUS

C-RUNW-DISP Displaced threshold markings CONTINUOUS

C-RUNW-DIST Fixed distance markings CONTINUOUS

C-RUNW-EDGE Airfield runway edges CONTINUOUS

C-RUNW-ENDP Runway endpoint CONTINUOUS

C-RUNW-ENDP-MARK Runway label marking point CONTINUOUS

C-RUNW-IDEN Runway numbers and letters CONTINUOUS

C-RUNW-INTS Runway intersection CONTINUOUS

C-RUNW-LAHS Runway land and hold short area CONTINUOUS

C-RUNW-SAFT Runway Safety Area CONTINUOUS

C-RUNW-SEGM Runway segment CONTINUOUS



C-RUNW-SHLD Runway Shoulder CONTINUOUS

C-RUNW-SIDE Side stripes CONTINUOUS

C-RUNW-SIGN Airfield signs on the runway such as distance remaining signs CONTINUOUS

C-RUNW-STWY Runway stopway markings CONTINUOUS

C-RUNW-TDZM Touchdown zone markers CONTINUOUS

C-RUNW-THRS Threshold markers CONTINUOUS

C-SEAP-BUOY Seaplane navigation buoy CONTINUOUS

C-SEAP-DOCK Seaplane dock CONTINUOUS

C-SEAP-LNDA Seaplane landing area CONTINUOUS

C-SEAP-RAMP Seaplane ramp site CONTINUOUS

C-SEAP-RAMP-CNTR Seaplane ramp centerline CONTINUOUS

C-SECT-IDEN Component identification numbers CONTINUOUS

C-SECT-MBND Material beyond section cut CONTINUOUS

C-SECT-MCUT Material cut by section CONTINUOUS

C-SECT-PATT Textures and hatch patterns CONTINUOUS

C-SITE-EROS Riprap, revetments/stone protection, breakwaters, dikes, etc. CONTINUOUS

C-SITE-FENC Fences and Handrails CONTINUOUS

C-SITE-FENC-IDEN Fence, handrail, ramp, sign, and trail annotation CONTINUOUS

C-SITE-FENC-POST Fence Post CONTINUOUS

C-SITE-FENP Fence Posts CONTINUOUS

C-SITE-IDEN Site improvement annotation CONTINUOUS

C-SITE-IMPR Site improvements (channel or levee features) CONTINUOUS

C-SITE-MAIL-SYMB Mail Box CONTINUOUS

C-SITE-MISC-UNKN Miscellaneous Unknown Item CONTINUOUS

C-SITE-POLE-MISC Existing Miscellaneous Poles CONTINUOUS

C-SITE-RAMP-ADA_ ADA Ramp CONTINUOUS

C-SITE-SIGN-LARG Large Sign CONTINUOUS

C-SITE-SIGN-SMAL Small Sign CONTINUOUS

C-SITE-SIGN-STOP Stop Sign CONTINUOUS

C-SITE-STRC Structures (bridges, sheds, foundation pads, footings, etc.) CONTINUOUS

C-SITE-STRS Stairs and ramps CONTINUOUS

C-SITE-WALK Walks, trails, and bicycle paths DASHED

C-SSWR-ABND Abandoned Piping CONTINUOUS

C-SSWR-ANNO Annotation CONTINUOUS

C-SSWR-DEVC Sanitary, Unknown Miscellaneous Item CONTINUOUS



C-SSWR-DEVC-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-SSWR-FILT Filtration beds CONTINUOUS

C-SSWR-FILT-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-SSWR-FLOW Flow Direction Arrows CONTINUOUS

C-SSWR-FTTG-CLNO Cleanout CONTINUOUS

C-SSWR-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-SSWR-JBOX-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-SSWR-JBOX-SNMH Sanitary Manhole CONTINUOUS

C-SSWR-LAGN Lagoons CONTINUOUS

C-SSWR-LEAC Leach field CONTINUOUS

C-SSWR-LFSTA-LFSTA Lift Station SSWAF

C-SSWR-MAIN Sanitary Sewer Piping CONTINUOUS

C-SSWR-NITF Nitrification drain fields CONTINUOUS

C-SSWR-PLNT Treatment plants CONTINUOUS

C-SSWR-PUMP-PMPS Pump Station CONTINUOUS

C-SSWR-SERV Sanitary Sewer Service Piping CONTINUOUS

C-SSWR-SIGN Surface Markers/Signs CONTINUOUS

C-SSWR-STNS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-SSWR-SVLVE-SVLVE Sewer Valve CONTINUOUS

C-SSWR-TANK-SPTA Septic Tank CONTINUOUS

C-STRC-OTLN Bridges, piers, breakwaters, docks, floats, etc. - outlines DASHED

C-STRC-TOWR Tower CONTINUOUS

C-STRM-ABND Abandoned Piping CONTINUOUS

C-STRM-AFFF AFFF lagoon/detention pond CONTINUOUS

C-STRM-ANNO Annotation CONTINUOUS

C-STRM-CHUT Chutes and concrete erosion control structures CULVRT

C-STRM-CULV-CLVE Culvert CONTINUOUS

C-STRM-CULV-ENDS Culvert End Symbol CONTINUOUS

C-STRM-DEVC Storm Sewer, Unknown Miscellaneous Item CONTINUOUS

C-STRM-DEVC-GRAT Grate CONTINUOUS

C-STRM-FLOW Flow Direction Arrows CONTINUOUS

C-STRM-FMON Flow monitoring station CONTINUOUS

C-STRM-FTTG-CLNO Cleanout CONTINUOUS

C-STRM-HDWL-HDWL Headwall CONTINUOUS

C-STRM-IDEN Identifier tags, symbol modifier, and text CONTINUOUS



C-STRM-INLT-CBSN Catch Basin CONTINUOUS

C-STRM-INLT-CBSR Round Catch Basin CONTINUOUS

C-STRM-LAGN Lagoons, ponds, watersheds, and basins STRAF

C-STRM-MAIN Storm Sewer Piping CONTINUOUS

C-STRM-MHOL-SDMH Storm Drainage Manhole CONTINUOUS

C-STRM-PUMP-PMPS Pump Station CONTINUOUS

C-STRM-ROOF Roof Drain Line CONTINUOUS

C-STRM-SERV Storm Sewer Service Piping CONTINUOUS

C-STRM-SIGN Surface Markers/Signs CONTINUOUS

C-STRM-STNS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

C-STRM-SUBS Subsurface drain piping CONTINUOUS

C-TANK-ABOV Tank, Above Ground CONTINUOUS

C-TANK-ANNO-LEGN Storage Tank Label CONTINUOUS

C-TANK-IDEN Storage Tank Legend CONTINUOUS

C-TANK-UNDR Underground Storage Tank CHAIN

C-TAXI-CNTR Centerline markings CONTINUOUS

C-TAXI-CNTR-IDEN Centerline annotation CONTINUOUS

C-TAXI-CNTR-MARK Centerline markings CHAIN

C-TAXI-CNTR-MRKG Centerline markings CONTINUOUS

C-TAXI-EDGE Edge markings CONTINUOUS

C-TAXI-HOLD Holding lines CONTINUOUS

C-TAXI-IDEN Annotation CONTINUOUS

C-TAXI-INTS Taxiway intersection CONTINUOUS

C-TAXI-OTLN Taxiway - outlines CONTINUOUS

C-TAXI-OTLN-AIRF Taxiway - outlines CONTINUOUS

C-TAXI-SHLD Shoulder transverse stripes DASHED_DOTTED

C-TAXI-SHLD-AIRF Shoulder transverse stripes CONTINUOUS

C-TAXI-SIGN Airfield signs on the taxiway CONTINUOUS

C-TOPO-AUCO Noise Complaint CONTINUOUS

C-TOPO-AUST Noise Monitoring Station CONTINUOUS

C-TOPO-AUZN Noise Contour/Zone CONTINUOUS

C-TOPO-BKLN Breaklines CONTINUOUS

C-TOPO-BORE Boring locations CONTINUOUS

C-TOPO-COOR Coordinate grid ticks and text CONTINUOUS

C-TOPO-DEPR-TICK Depression Tick Mark CONTINUOUS



C-TOPO-DTCH-SWAP Swamp Symbol CONTINUOUS

C-TOPO-DTMP DTM points CONTINUOUS

C-TOPO-DTMT DTM triangles CONTINUOUS

C-TOPO-FLZN Flood Zone CONTINUOUS

C-TOPO-MAJR Major contours CONTINUOUS

C-TOPO-MAJR-IDEN Contour Specific Text CONTINUOUS

C-TOPO-MINR Minor contours CONTINUOUS

C-TOPO-MINR-IDEN Minor contours - annotation CONTINUOUS

C-TOPO-MINR-ONEF Minor contours - One Foot Intervals CONTINUOUS

C-TOPO-MINR-TWOF Minor contours - Two Foot Intervals CONTINUOUS

C-TOPO-OBSC Obscured Hidden Point CONTINUOUS

C-TOPO-RNYE Runway centerline elevation point CONTINUOUS

C-TOPO-SHOR Shoreline CONTINUOUS

C-TOPO-SLOP-FILL Cut/fill slopes CONTINUOUS

C-TOPO-SLOP-IDEN Cut/fill slope, top/toe slope annotation CONTINUOUS

C-TOPO-SLOP-TOPT Top/toe slopes CONTINUOUS

C-TOPO-SOUN Soundings CONTINUOUS

C-TOPO-SPOT Spot elevations CONTINUOUS

C-TOPO-SPOT-IDEN Spot elevations - annotation CONTINUOUS

C-TOPO-WATR Water area CONTINUOUS

C-TRAF-IDEN Airfield traffic area annotation CONTINUOUS

C-TRAF-TYPA Type A traffic area DASHED_DOUBLE-DOTTED

C-TRAF-TYPB Type B traffic area DASHED_TRIPLICATE-DOTTED C-TRAF-TYPC Type C traffic area CONTINUOUS

E-AFLD-BCNS-IDEN Identifier tags, symbol modifiers, and text CONTINUOUS

E-AFLD-BCNS-MISC Miscellaneous navaids - wind cones and beacons CONTINUOUS

E-AFLD-BCNS-STRB Strobe beacons CONTINUOUS

E-AFLD-DEVC Capacitors, voltage regulators, motors, buses, generators, etc. CONTINUOUS

E-AFLD-JBOX Junction boxes, pull boxes, manholes, handholes, pedestals, splices CONTINUOUS

E-AFLD-LITE-APPR Approach lights CONTINUOUS

E-AFLD-LITE-DIST Distance and arresting gear markers CONTINUOUS

E-AFLD-LITE-LANE Hoverlane, taxilane, and helipad lights CONTINUOUS

E-AFLD-LITE-OBST Obstruction lights CONTINUOUS

E-AFLD-LITE-RUNW Runway lights CONTINUOUS

E-AFLD-LITE-SIGN Taxiway guidance signs CONTINUOUS



E-AFLD-LITE-TAXI Taxiway lights CONTINUOUS

E-AFLD-LITE-THRS Threshold lights CONTINUOUS

E-AFLD-VALT Airfield lighting vaults CONTINUOUS

E-AIRF-DUCT Ductbanks CONTINUOUS

E-ALRM-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-ALRM-SYMB-HORN Security Horn CONTINUOUS

E-ANNO-DIMS Witness/Extension Lines, Dimension Terminators, Dimension Text CONTINUOUS

E-ANNO-KEYN Reference Keynotes with Associated Leaders CONTINUOUS

E-ANNO-LEGN Legends and Schedules CONTINUOUS

E-ANNO-MATC Match Lines CONTINUOUS

E-ANNO-NOTE General Notes and Remarks CONTINUOUS

E-ANNO-NPLT Non-plotting Graphic Information CONTINUOUS

E-ANNO-PATT Miscellaneous Patterning and Hatching CONTINUOUS

E-ANNO-REDL Redlines and Markups CONTINUOUS

E-ANNO-REFR Reference files (AutoCAD users only, see Chapter 4) CONTINUOUS

E-ANNO-REVS Revision Clouds and Symbols CONTINUOUS

E-ANNO-SITE-OTLN Key Plan CONTINUOUS

E-ANNO-SYMB Miscellaneous Symbols CONTINUOUS

E-ANNO-TEXT Miscellaneous Text and Callouts with Associated Leaders CONTINUOUS

E-ANNO-TEXT-FUTR Text for Future Objects CONTINUOUS

E-ANNO-TEXT-TTLB Title Block Text CONTINUOUS

E-ANNO-TTLB Title Block CONTINUOUS

E-BAGS-MCPP Distribution Motor Control Center CONTINUOUS

E-BAGS-MPDP Power Distribution Panel CONTINUOUS

E-BCNS-MISC-MSFL Sequenced Flasher Light CONTINUOUS

E-BCNS-MISC-TDZL Touchdown Zone Light CONTINUOUS

E-BCNS-MISC-WDCN Windcone CONTINUOUS

E-BCNS-STRB-ABCN Airfield Beacon CONTINUOUS

E-BELL-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-BELL-SYMB-BUZZ Buzzer DASHED

E-BELL-SYMB-CHIM Chime CONTINUOUS

E-BELL-SYMB-SBEL Bell CONTINUOUS

E-CABL-COAX Coax cable FIBOPT

E-CABL-FIBR Fiber optics cable CONTINUOUS

E-CABL-IDEN Cable identifiers CONTINUOUS



E-CABL-MULT Multi-conductor cable CONTINUOUS

E-CABL-TRAY Cable tray and wireway symbols CONTINUOUS

E-CATH-ANOD-CPSA Cathodic Protection Sacrificial Anode CONTINUOUS

E-CATH-CURR Impress current system CONTINUOUS

E-CATH-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-CATH-TEST-CTES Cathodic Protection Test Station CONTINUOUS

E-CATV-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-CATV-SYMB-TVOU Cable television system symbols CONTINUOUS

E-CCTV-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-CCTV-SYMB-CCAM Closed-circuit television system (Camera) CONTINUOUS

E-CIRC-CTRL Control and monitoring circuits CONTINUOUS

E-CIRC-IDEN-CLTM Circuit Line Terminator CONTINUOUS

E-CIRC-IDEN-CTID Circuit ID Symbol CONTINUOUS

E-CIRC-MULT Multiple circuits CONTINUOUS

E-CIRC-SERS Series circuits CONTINUOUS

E-CLOK-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-CLOK-SYMB-CLKW Clock Outlet, Wall Mounted CONTINUOUS

E-COMM-EQPM Other communications distribution equipment CONTINUOUS

E-COMM-JBOX-CHLN Communication Manhole, New COMARN

E-COMM-JBOX-CHLX Communication Manhole, Existing CONTINUOUS

E-COMM-JBOX-JNBX Junction Box CONTINUOUS

E-COMM-OVHD Overhead communication/telephone lines COMUGN

E-COMM-OVHD-IDEN Identifier tags, symbol modifier and text CONTINUOUS

E-COMM-UNDR Underground communication/telephone lines CONTINUOUS

E-COMM-UNDR-IDEN Identifier tags, symbol modifier and text CONTINUOUS

E-DETL-GRPH Graphics, gridlines, non-text items CONTINUOUS

E-DETL-INPD Inch-pound-specific dimensions and notes CONTINUOUS

E-DETL-METR Metric-specific dimensions and notes CONTINUOUS

E-DIAG-GRPH Graphics, gridlines, non-text items CONTINUOUS

E-DIAG-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-DIAG-INPD Inch-pound-specific dimensions and notes CONTINUOUS

E-DIAG-METR Metric-specific dimensions and notes CONTINUOUS

E-DICT-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-DICT-SYMB-SOND Central dictation system symbol CONTINUOUS

E-DISC-INFO Clearances and working space information (NEC code, etc.) CONTINUOUS



E-DUCT-MULT Ductbank CONTINUOUS

E-DUCT-MULT-COMM Ductbanks CONTINUOUS

E-DUCT-MULT-DBID Ductbank ID Symbol EUDUCN

E-DUCT-MULT-ELEC Ductbanks CONTINUOUS

E-DUCT-MULT-IDEN Ductbank ID Symbol EUDUCN

E-ELEC-DEVC-GRTR Generator CONTINUOUS

E-ELEC-DEVC-MREL Electrical Meter CONTINUOUS

E-ELEC-DEVC-MRHP Motor CONTINUOUS

E-ELEC-JBOX-EBXN Electrical Pullbox, New CONTINUOUS

E-ELEC-JBOX-EBXX Electrical Pullbox, Existing CONTINUOUS

E-ELEC-JBOX-EHHN Electrical Handhole, New CONTINUOUS

E-ELEC-JBOX-EHHX Electrical Handhole, Existing CONTINUOUS

E-ELEC-JBOX-EHLN Electrical Manhole, New CONTINUOUS

E-ELEC-JBOX-EHLX Electrical Manhole, Existing CONTINUOUS

E-ELEC-JBOX-JNBX Junction Box CONTINUOUS

E-ELEC-SUBS Other substation equipment CONTINUOUS

E-ELEC-SWCH Fuse cutouts, switches, circuit breakers, reclosers, etc. CONTINUOUS

E-EMCS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-EMCS-SYMB Energy monitoring control system symbols CONTINUOUS

E-EMER-EMER Emergency systems equipment CONTINUOUS

E-FLOR-IDEN Room name, space identification text CONTINUOUS

E-FLOR-NUMB Room/space identification number and symbol CONTINUOUS

E-GRND-CIRC Circuit identifiers (e.g., panel circuits, wire/conduit size, tags, etc.) CONTINUOUS

E-GRND-DIAG Ground system diagram CONTINUOUS

E-GRND-EQUI Equipotential ground system CONTINUOUS

E-GRND-REFR Reference ground system CONTINUOUS

E-INTC-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-INTC-SYMB-SOND Intercom/PA system symbol CONTINUOUS

E-LITE-APPR Approach lights CONTINUOUS

E-LITE-APRN Apron Lighting CONTINUOUS

E-LITE-CIRC Lighting circuits (including crosslines and homeruns) CONTINUOUS

E-LITE-CIRC-NUMB Lighting circuit numbers (e.g., panel/circuit number, wire/conduit size) CONTINUOUS

E-LITE-CLNG Ceiling mounted (surface/pendant) fixtures CONTINUOUS

E-LITE-CONS Constant Current Regulators CONTINUOUS

E-LITE-DIST Distance and arresting gear markers and lights CONTINUOUS



E-LITE-EMER Emergency fixtures (outline of ceiling mounted light on E-LITE-CLNG) CONTINUOUS

E-LITE-EXIT Exit fixtures (outline of ceiling mounted light on E-LITE-CLNG) CONTINUOUS

E-LITE-EXTR Exterior lights CONTINUOUS

E-LITE-EXTR-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-LITE-IDEN Light fixture identifier tags CONTINUOUS

E-LITE-JBOX Junction boxes CONTINUOUS

E-LITE-LANE Hoverlane, taxilane, and helipad lights CONTINUOUS

E-LITE-OBST Obstruction lights CONTINUOUS

E-LITE-PANL Main distribution panels, switchboards, lighting panels CONTINUOUS

E-LITE-RNWY-GARD Runway guard lights CONTINUOUS

E-LITE-ROOF Roof lighting CONTINUOUS

E-LITE-RUNW-CNTR Light Runway Centerline CHAIN

E-LITE-RUNW-DTGS1 Runway Distance to go lights CONTINUOUS

E-LITE-RUNW-EDGE Runway edge lights CONTINUOUS

E-LITE-RUNW-RCLL Runway Center Light CONTINUOUS

E-LITE-RUNW-RWEL Runway End Light CONTINUOUS

E-LITE-RUNW-TDZN Light Runway TDZN CONTINUOUS

E-LITE-SIGN Taxiway guidance signs CONTINUOUS

E-LITE-SIGN-ELEC Taxiway guidance signs CONTINUOUS

E-LITE-SPCL Special fixtures CONTINUOUS

E-LITE-SWCH Lighting contactors, photoelectric controls, lighting controls, etc. CONTINUOUS

E-LITE-TAXI-CNTL Taxiway centerline lights CONTINUOUS

E-LITE-TAXI-EDGE Light Taxiway Edge CONTINUOUS

E-LITE-THRS Threshold lights CONTINUOUS

E-LITE-WALL Wall mounted fixtures CONTINUOUS

E-LTNG-COND Lightning protection conductors CONTINUOUS

E-LTNG-TERM Lightning protection terminals CONTINUOUS

E-NURS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-PANL-SERV-ENTR Service Entrance Section (SES) CONTINUOUS

E-PANL-SOSW Fuel Shutoff Switch CONTINUOUS

E-POWR-BUSW Busways and wireways CONTINUOUS

E-POWR-CABL Cable trays CONTINUOUS

E-POWR-CIRC Power circuits (including crosslines and homeruns) CONTINUOUS

E-POWR-CIRC-NUMB Power circuit numbers (e.g., panel/circuit number, wire/conduit size) CONTINUOUS

E-POWR-CLNG Ceiling outlets (receptacles and switches) CONTINUOUS



E-POWR-EQUI Equipment CONTINUOUS

E-POWR-FEED Feeders CONTINUOUS

E-POWR-GENR Electric Generator CONTINUOUS

E-POWR-GENR-GENR Generator CONTINUOUS

E-POWR-JBOX-JBWM Junction Box, Wall Mounted CONTINUOUS

E-POWR-JBOX-JNBX Junction Box CONTINUOUS

E-POWR-MOTR-MRHP Motor CONTINUOUS

E-POWR-PANL ElectricPanel CONTINUOUS

E-POWR-PANL-BFMC Flush Mounted Panelboard Cabinet CONTINUOUS

E-POWR-PANL-BSMC Surface Mounted Panelboard Cabinet CONTINUOUS

E-POWR-SWCH Electric Automatic Transfer Switch CONTINUOUS

E-POWR-SWCH-SIDL Disconnect Switch DASHED_SPACED

E-POWR-SWCH-SIDP Disconnect Switch CONTINUOUS

E-POWR-URAC Underfloor raceways CONTINUOUS

E-POWR-WALL Wall/floor outlets (receptacles and switches) CONTINUOUS

E-POWR-XMEL Transformer - Elevated CONTINUOUS

E-POWR-XMFR Transformer - Floor/Pad Mounted CONTINUOUS

E-POWR-XMVT Transformer - Vault CONTINUOUS

E-PRIM-OVHD Overhead electrical utility lines EPUGN

E-PRIM-UNDR Underground electrical utility lines ESARN

E-SECD-OVHD Overhead electrical utility lines ESUGN

E-SECD-OVHD-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-SECD-UNDR Underground electrical utility lines CONTINUOUS

E-SECD-UNDR-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-SERT-ACCS Access control system symbols CONTINUOUS

E-SERT-CLNG Ceiling mounted sensor CONTINUOUS

E-SERT-FLOR Floor mounted sensor CONTINUOUS

E-SERT-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-SERT-UNDR Buried sensor CONTINUOUS

E-SERT-WALL Wall mounted sensor CONTINUOUS

E-SOUN-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-SPCL-SRFS Surface Sensor System CONTINUOUS

E-SPCL-SYST Special systems (UMCS, EMCS, CATV) CONTINUOUS

E-SPCL-TRAF Traffic signal system CONTINUOUS

E-SPCL-TRAF-IDEN Traffic signal identifier tags, symbol modifier, and text CONTINUOUS



E-STAT-DEMO-PHS1 Demolition - phase 1 CONTINUOUS



E-TRAN-PADM-RPMN Pad Mounted Transformer, New CONTINUOUS

E-TRAN-PADM-RPMR Pad Mounted Transformer, Remove CONTINUOUS

E-TRAN-PADM-RPMX Pad Mounted Transformer, Existing CONTINUOUS

E-TRAN-POLE-RPLN Pole Mounted Transformer, New CONTINUOUS

E-TRAN-POLE-RPLR Pole Mounted Transformer, Remove CONTINUOUS

E-TRAN-POLE-RPLX Pole Mounted Transformer, Existing CONTINUOUS

E-TVAN-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

E-TVAN-SYMB TV antenna system CONTINUOUS

F-AFFF-EQPM Equipment CONTINUOUS

F-AFFF-PIPE Piping CONTINUOUS

F-ALRM-EQPM-AMPL Distributive Amplifier CONTINUOUS

F-ALRM-EQPM-BSTR Strobe Power Booster CONTINUOUS

F-ANNO-DIMS Witness/Extension Lines, Dimension Terminators, Dimension Text CONTINUOUS

F-ANNO-KEYN Reference Keynotes with Associated Leaders CONTINUOUS

F-ANNO-LEGN Legends and Schedules CONTINUOUS

F-ANNO-MATC Match Lines CONTINUOUS

F-ANNO-NOTE General Notes and Remarks CONTINUOUS

F-ANNO-NPLT Non-plotting Graphic Information CONTINUOUS

F-ANNO-PATT Miscellaneous Patterning and Hatching CONTINUOUS

F-ANNO-REDL Redlines and Markups CONTINUOUS

F-ANNO-REFR Reference files (AutoCAD users only, see Chapter 4) CONTINUOUS

F-ANNO-REVS Revision Clouds and Symbols CONTINUOUS

F-ANNO-SITE-OTLN Key Plan CONTINUOUS

F-ANNO-SYMB Miscellaneous Symbols CONTINUOUS

F-ANNO-TEXT Miscellaneous Text and Callouts with Associated Leaders CONTINUOUS

F-ANNO-TTLB Title Block CONTINUOUS

F-CO2S-EQPM Equipment CONTINUOUS

F-CTRL-DOOR-DEVC Magnetic Hold Open Device CONTINUOUS

F-CTRL-PANL Control panels CONTINUOUS

F-DETL-GRPH Graphics, gridlines, non-text items CONTINUOUS

F-DETL-INPD Inch-pound-specific dimensions and notes CONTINUOUS

F-DETL-METR Metric-specific dimensions and notes CONTINUOUS



F-FLOR-IDEN Room name, space identification text CONTINUOUS

F-FLOR-NUMB Room/space identification number and symbol CONTINUOUS

F-HALN-EQPM Halon equipment CONTINUOUS

F-IGAS-EQPM Inert gas equipment CONTINUOUS

F-LITE-EMER Emergency fixtures CONTINUOUS

F-LITE-EXIT Exit fixtures CONTINUOUS

F-LSFT-EGRE Egress requirements designator CONTINUOUS

F-LSFT-OCCP Occupant load for egress capacity CONTINUOUS

F-LSFT-TRVL Maximum travel distances CONTINUOUS

F-PROT-ALRM-COMB Audible with Integral Strobe CONTINUOUS

F-PROT-ALRM-HORN Audible Alarm CONTINUOUS

F-PROT-ALRM-MANL Fire Alarm - Pull Station CONTINUOUS

F-PROT-ALRM-STRB Strobe CONTINUOUS

F-PROT-CABN Fire hose cabinets CONTINUOUS

F-PROT-CO2M Carbon Monoxide Detector - Wall Mount CONTINUOUS

F-PROT-DFIB Automatic Electronic Defibrillator (A.E.D.) CONTINUOUS

F-PROT-EQPM-AIRC Air Compressor CONTINUOUS

F-PROT-EQPM-PUMP Fire Pump CONTINUOUS

F-PROT-EXTN Fire extinguishers and fire extinguisher cabinets CONTINUOUS

F-PROT-HEAT Heat Detector - Ceiling Mounted CONTINUOUS

F-PROT-HOSE Fire hoses CONTINUOUS

F-PROT-HOSE-CABN Fire Hose Cabinet CONTINUOUS

F-PROT-SMOK Smoke Detector CONTINUOUS

F-RATE-DOOR Door fire ratings CONTINUOUS

F-RATE-WALL Wall fire ratings CONTINUOUS

F-SPRN-CLHD Sprinkler - ceiling heads CONTINUOUS

F-SPRN-OTHD Sprinkler - other heads CONTINUOUS

F-SPRN-PIPE Sprinkler piping CONTINUOUS

F-SPRN-STAN Standpipe system CONTINUOUS

F-STAT-DEMO-PHS1 Demolition - phase 1 CONTINUOUS



F-WATR-CONN Fire department connections CONTINUOUS

F-WATR-HYDR Hydrants CONTINUOUS

F-WATR-PIPE Piping CONTINUOUS



F-WATR-PUMP Fire pumps CONTINUOUS

G-ANNO-NPLT Non-plotting graphic information CONTINUOUS

G-ANNO-PATT Miscellaneous patterning and hatching CONTINUOUS

G-ANNO-REFR Reference files (AutoCAD users only, see Chapter 4) CONTINUOUS

G-ANNO-SYMB Miscellaneous symbols CONTINUOUS

G-ANNO-TEXT Miscellaneous text and callouts with associated leaders CONTINUOUS

G-ANNO-TTLB Border and title block linework CONTINUOUS

G-GRID-EXTR Column grid outside building CONTINUOUS

G-GRID-IDEN Column grid tags CONTINUOUS

G-PLAN-OTLN Floor outline/perimeter/building footprint CONTINUOUS

G-SITE-OTLN Site plan - key map CONTINUOUS

H-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text CONTINUOUS

H-ANNO-KEYN Reference keynotes with associated leaders CONTINUOUS

H-ANNO-NPLT Non-plotting graphic information CONTINUOUS

H-ANNO-PATT Miscellaneous patterning CONTINUOUS

H-ANNO-SYMB Reference bubbles, matchlines and breaklines CONTINUOUS

H-ANNO-TEXT Detail title text, text and associated leaders, notes CONTINUOUS

H-BLDG-IDEN Annotation CONTINUOUS

H-BLDG-OTLN Command posts, information centers CONTINUOUS

H-DECN-EQPM Decontamination equipment CONTINUOUS

H-DECN-IDEN Annotation CONTINUOUS

H-DETL-GRPH Graphics, gridlines, non-text items CONTINUOUS

H-DETL-INPD Inch-pound-specific dimensions and notes CONTINUOUS

H-DETL-METR Metric-specific dimensions and notes CONTINUOUS

H-DISP-HAZW Hazardous waste CONTINUOUS

H-DISP-IDEN Annotation CONTINUOUS

H-DISP-MUNT Munitions CONTINUOUS

H-DISP-TANK-LTNK Spill Containment Tank CONTINUOUS

H-FIXT-EYEW-EYEW Emergency Eyewash CONTINUOUS

H-FIXT-SHOW-EMHW Emergency Shower CONTINUOUS

H-MNST-AIRQ-AQST Air Quality Monitoring Station CONTINUOUS

H-MNST-GWTR-GQST Groundwater Quality Monitoring Station CONTINUOUS

H-MNST-IDEN Annotation CONTINUOUS

H-MNST-LAND-LGAS Landfill Gas Monitoring Probe CONTINUOUS

H-MNST-SOIL-SGAS Soil Gas Monitoring Probe CONTINUOUS



H-MNST-SWTR-SQST Surface Water Quality Monitoring Station CONTINUOUS

H-POLL-CONC Polluted area of concern CONTINUOUS

H-POLL-IDEN Annotation CONTINUOUS

H-POLL-ORIG-ELLS Pollution Source Site CONTINUOUS

H-POLL-POTN-PLOC Potential Release Location CONTINUOUS

H-SAMP-AIRS-ASMP Air Sample Location CONTINUOUS

H-SAMP-BIOL-BSMP Biological Sample Location CONTINUOUS

H-SAMP-GWTR-WSMP Groundwater Sample Location CONTINUOUS

H-SAMP-IDEN Annotation CONTINUOUS

H-SAMP-MAGN-MLOC Magnetometer Detector Location CONTINUOUS

H-SAMP-SEDI-SSMP Sediment Sample Location CONTINUOUS

H-SAMP-SOIL-SSMP Soil Sample Location CONTINUOUS

H-SAMP-SOLI-MSMP Solid Material Sample Location CONTINUOUS

H-SAMP-SWTR-SSMP Surface Water Sample Location CONTINUOUS

H-SAMP-WAST-WSMP Waste Sample Location CONTINUOUS

H-SECT-IDEN Component identification numbers CONTINUOUS

H-SECT-MBND Material beyond section cut CONTINUOUS

H-SECT-MCUT Material cut by section CONTINUOUS

H-SECT-PATT Textures and hatch patterns CONTINUOUS

H-STOR-HAZM Hazardous materials CONTINUOUS

H-STOR-HAZW Hazardous waste CONTINUOUS

H-STOR-IDEN Annotation CONTINUOUS

I-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text CONTINUOUS

I-ANNO-KEYN Reference keynotes with associated leaders CONTINUOUS

I-ANNO-NOTE General notes and general remarks CONTINUOUS

I-ANNO-NPLT Non-plotting graphic information CONTINUOUS

I-ANNO-PATT Miscellaneous patterning CONTINUOUS

I-ANNO-SYMB Reference bubbles, matchlines and breaklines CONTINUOUS

I-ANNO-TEXT Detail title text, text and associated leaders, notes CONTINUOUS

I-DETL-GRPH Graphics, gridlines, non-text items CONTINUOUS

I-DETL-INPD Inch-pound-specific dimensions and notes CONTINUOUS

I-DETL-METR Metric-specific dimensions and notes CONTINUOUS

I-ELEV-CASE Wall mounted casework CONTINUOUS

I-ELEV-FIXT Miscellaneous fixtures CONTINUOUS

I-ELEV-FNSH Finishes, woodwork and trim CONTINUOUS



I-ELEV-IDEN Component identification numbers CONTINUOUS

I-ELEV-PATT Textures and hatch patterns CONTINUOUS

I-ELEV-SIGN Signage CONTINUOUS

I-EQPM-ACCS Equipment access CONTINUOUS

I-EQPM-CHLD Child development (play toys, teaching rugs, play forms) CONTINUOUS

I-EQPM-COPY Copiers, fax machines, office equipment CONTINUOUS

I-EQPM-FIXD Fixed equipment CONTINUOUS

I-EQPM-IDEN Equipment identification numbers CONTINUOUS

I-EQPM-MEDI Medical (exam beds, dental chairs, etc.) DASHED

I-EQPM-MOVE Moveable equipment CONTINUOUS

I-EQPM-OVHD Overhead, ceiling mounted, and suspended equipment CONTINUOUS

I-EQPM-STOR Storage equipment CONTINUOUS

I-FLOR-SIGN Signage CONTINUOUS

I-FURN-ACCS Accessories (vestibule mats, partitions, draperies, trash cans, etc.) CONTINUOUS

I-FURN-ADPC Automated Data Processing Components CONTINUOUS

I-FURN-ARTW Artwork CONTINUOUS

I-FURN-FLOR Flooring (carpet, rugs, etc.) CONTINUOUS

I-FURN-FREE Free-standing furnishings (desks, beds, tables, dressers, credenzas) CONTINUOUS

I-FURN-GRID Planning Grid/modular outline CONTINUOUS

I-FURN-IDEN Furniture code identification CONTINUOUS

I-FURN-IDEN-MFSY Furniture Symbol CONTINUOUS

I-FURN-PLNT Plants CONTINUOUS

I-FURN-PLNT-APLT Artificial Plant CONTINUOUS

I-FURN-SEAT Chairs, sofas, etc. CONTINUOUS

I-FURN-STOR File cabinets, high density storage, shelving, storage cabinets CONTINUOUS

I-SYST-BIDS Baggage information display system equipment CONTINUOUS

I-SYST-CUTE Common use terminal equipment in an airport terminal CONTINUOUS

I-SYST-FIDS Flight information display system equipment CONTINUOUS

I-SYST-FURN Furniture CONTINUOUS

I-SYST-IDEN Code identification CONTINUOUS

I-SYST-LITE-WLIT Workstation Light CONTINUOUS

I-SYST-PATT Patterns CONTINUOUS

I-SYST-PNLS Panels CONTINUOUS

I-SYST-POWR Power, communication components CONTINUOUS

I-SYST-SECU-CMRA Security camera locations inside buildings CONTINUOUS



I-SYST-STOR Storage components CONTINUOUS

I-SYST-WALL Systems furniture partition walls CONTINUOUS

I-SYST-WKSF Work surface components CONTINUOUS

L-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text CONTINUOUS

L-ANNO-KEYN Reference keynotes with associated leaders CONTINUOUS

L-ANNO-NOTE General notes and general remarks CONTINUOUS

L-ANNO-NPLT Non-plotting graphic information CONTINUOUS

L-ANNO-PATT Miscellaneous patterning CONTINUOUS

L-ANNO-SYMB Reference bubbles, matchlines and breaklines CONTINUOUS

L-ANNO-TEXT Detail title text, text and associated leaders, notes CONTINUOUS

L-DETL-GATE Gate CONTINUOUS

L-DETL-GRPH Graphics, gridlines, non-text items CONTINUOUS

L-DETL-INPD Inch-pound-specific dimensions and notes CONTINUOUS

L-DETL-METR Metric-specific dimensions and notes CONTINUOUS

L-DETL-TKST Tank Site CONTINUOUS

L-IRRG-COVR Irrigation coverage, spray distribution patterns CONTINUOUS

L-IRRG-EQPM Equipment (e.g., controllers, valves, RPBPs, etc.) CONTINUOUS

L-IRRG-HEAD Irrigation heads, bubblers, and drip irrigation emitters CONTINUOUS

L-IRRG-IDEN Annotation CONTINUOUS

L-IRRG-PIPE Piping CONTINUOUS

L-IRRG-SPKL Sprinklers CONTINUOUS

L-PLNT-BEDS Planting beds CONTINUOUS

L-PLNT-BUSH-LINE Bush and Shrub Line CONTINUOUS

L-PLNT-BUSH-SHBC Shrub, Coniferous CONTINUOUS

L-PLNT-BUSH-SHBD Shrub, Deciduous CONTINUOUS

L-PLNT-CTNR Containers or planters CONTINUOUS

L-PLNT-GRND Groundcover and vines CONTINUOUS

L-PLNT-IDEN Annotation CONTINUOUS

L-PLNT-MLCH Mulches - organic and inorganic CONTINUOUS

L-PLNT-PLTS Planting plants (e.g., ornamental annuals and perennials) CONTINUOUS

L-PLNT-SHAD Shadow areas CONTINUOUS

L-PLNT-SPRG Sprigs CONTINUOUS

L-PLNT-TREE Trees (e.g., evergreen, deciduous, etc.) CONTINUOUS

L-PLNT-TREE-LINE Tree Line CONTINUOUS

L-PLNT-TURF Lawn areas (turfing limits) CONTINUOUS



L-SITE-BRDG Bridges CONTINUOUS

L-SITE-DECK Decks FENCE

L-SITE-FENC Fences CONTINUOUS

L-SITE-FURN Furnishings CONTINUOUS

L-SITE-GATE Gate CONTINUOUS

L-SITE-IDEN Annotation CONTINUOUS

L-SITE-PLAY Play structures CONTINUOUS

L-SITE-POOL Pools and spas CONTINUOUS

L-SITE-ROCK Boulders and cobble CONTINUOUS

L-SITE-RTWL Retaining walls CONTINUOUS

L-SITE-SPRT Sports fields CONTINUOUS

L-SITE-TUNL Tunnels CONTINUOUS

L-SITE-WALK Walks and steps CONTINUOUS

M-ACID-EQPM Acid, alkaline, and oil waste equipment ACIDWS

M-ACID-PIPE Piping 45 Degree Elbow DASHED

M-ACID-VENT Vent piping 45 Degree Elbow CONTINUOUS

M-AFRZ-PIPE 45 Degree Elbow CONTINUOUS

M-AFRZ-WAST Waste anti-freeze piping CONTINUOUS

M-ANNO-DIMS Witness/Extension Lines, Dimension Terminators, Dimension Text CONTINUOUS

M-ANNO-KEYN Reference keynotes with associated leaders CONTINUOUS

M-ANNO-LEGN Legends and Schedules CONTINUOUS

M-ANNO-MATC Match Lines CONTINUOUS

M-ANNO-NOTE General Notes and Remarks CONTINUOUS

M-ANNO-NPLT Non-plotting Graphic Information CONTINUOUS

M-ANNO-PATT Miscellaneous Patterning and Hatching CONTINUOUS

M-ANNO-REDL Redlines and Markups CONTINUOUS

M-ANNO-REFR Reference files (AutoCAD users only, see Chapter 4) CONTINUOUS

M-ANNO-REVS Revision Clouds and Symbols CONTINUOUS

M-ANNO-SITE-OTLN Key Plan CONTINUOUS

M-ANNO-SYMB Miscellaneous Symbols CONTINUOUS

M-ANNO-TEXT Miscellaneous Text and Callouts with Associated Leaders CONTINUOUS

M-ANNO-TEXT-FUTR Text for Future Objects CONTINUOUS

M-ANNO-TEXT-TTLB Title Block Text CONTINUOUS

M-ANNO-TTLB Title Block CONTINUOUS

M-BRIN-EQPM Brine system equipment CONTINUOUS



M-BRIN-PIPE 45 Degree Elbow CONTINUOUS

M-CHEM-EQPM Equipment CONTINUOUS

M-CHEM-PIPE 45 Degree Elbow CONDWR

M-CNDW-EQPM Condenser water equipment CONTINUOUS

M-CONT-THER Thermostats, controls, instrumentation, and sensors CONTINUOUS

M-CWTR-EQPM Equipment CONTINUOUS

M-DETL-GRPH Graphics, gridlines, non-text items CONTINUOUS

M-DETL-INPD Inch-pound-specific dimensions and notes CONTINUOUS

M-DETL-METR Metric-specific dimensions and notes CONTINUOUS

M-DIAG-GRPH Graphics, gridlines, non-text items CONTINUOUS

M-DIAG-INPD Inch-pound-specific dimensions and notes CONTINUOUS

M-DIAG-METR Metric-specific dimensions and notes CONTINUOUS

M-DUAL-EQPM Equipment CONTINUOUS

M-DUST-DUCT Dust and fume ductwork CONTINUOUS

M-DUST-EQPM Dust and fume collection equipment CONTINUOUS

M-ELEV-FIXT Miscellaneous fixtures CONTINUOUS

M-ELEV-IDEN Component identification numbers CONTINUOUS

M-ELEV-OTLN Building outlines CONTINUOUS

M-ELEV-PATT Textures and hatch patterns CONTINUOUS

M-ELEV-PFIX Plumbing fixtures CONTINUOUS

M-EXHS-DUCT Ductwork CONTINUOUS

M-EXHS-EQPM Equipment CONTINUOUS

M-FLOR-IDEN Room name, space identification text CONTINUOUS

M-FLOR-IDEN-HVAC Room name, space identification text CONTINUOUS

M-FLOR-NUMB Room/space identification number and symbol CONTINUOUS

M-FLOR-NUMB-HVAC Room/space identification number and symbol CONTINUOUS

M-GTHP-EQPM Equipment CONTINUOUS

M-GTHP-EQPM-HVAC Equipment CONTINUOUS

M-GTHP-PIPE Piping (includes fittings, valves) DASHED

M-HTCW-ABND Abandoned piping CONTINUOUS

M-HTCW-CHLP Chilled water plant CONTINUOUS

M-HTCW-CHLS-EL45 Chilled water service 45 Degree Elbow CONTINUOUS

M-HTCW-DEVC Rigid anchors, anchor guides, meters, pumps, tanks, etc. CONTINUOUS

M-HTCW-FLOW Flow direction arrows CONTINUOUS

M-HTCW-FTTG Caps and flanges CONTINUOUS



M-HTCW-HTPP High temperature water plant CONTINUOUS

M-HTCW-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

M-HTCW-JBOX Junction boxes, manholes, handholes, test boxes CONTINUOUS

M-HTCW-PITS Valve pits/vaults, steam pits CONTINUOUS

M-HTCW-PLNT-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

M-HTCW-PUMP Pump stations CONTINUOUS

M-HTCW-RTRN Return for all HTCW lines CONTINUOUS

M-HTCW-STNS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

M-HVAC-ACCS Equipment access doors CONTINUOUS

M-HVAC-AHUE-AHUM Air Handling Unit CONTINUOUS

M-HVAC-CDFF Ceiling diffusers, registers, and grilles CONTINUOUS

M-HVAC-EQPM Air system equipment CONTINUOUS

M-HVAC-EQPM-AHDU Air Handling Unit CONTINUOUS

M-HVAC-EQPM-BOIL Boiler CONTINUOUS

M-HVAC-EQPM-CHIL Chiller CONTINUOUS

M-HVAC-EQPM-CLTR Cooling Tower CONTINUOUS

M-HVAC-EQPM-CNDU Condensing Unit CONTINUOUS

M-HVAC-EQPM-HTEX Heat Exchanger CONTINUOUS

M-HVAC-EQPM-PKAC Packaged AC Unit CONTINUOUS

M-HVAC-EQPM-PUMP Pump CONTINUOUS

M-HVAC-IDEN Duct sizes CONTINUOUS

M-HVAC-RETN Return ductwork CONTINUOUS

M-HVAC-ROOF Roof Mounted HVAC Equipment CONTINUOUS

M-HVAC-SUPP Supply Outlet CONTINUOUS

M-HVAC-TAGS Diffuser/register/grille tags and air flow arrows CONTINUOUS

M-HVAC-WDFF Wall Diffuser CONTINUOUS

M-HWTR-EQPM Equipment CONTINUOUS

M-HWTR-PIPE Hot Water Return CWS

M-HWTS-PIPE Hot Water Supply CONTINUOUS

M-HYDR-EQPM Hydraulic system equipment CONTINUOUS

M-INSL-EQPM Insulating oil equipment CONTINUOUS

M-LUBE-EQPM Lubrication oil equipment CONTINUOUS

M-MACH-BASE Machinery bases CONTINUOUS

M-MACH-COMP Miscellaneous machinery parts and components CONTINUOUS

M-MACH-EXST Existing machinery CONTINUOUS



M-MACH-FAST Fasteners, nuts, and bolts CONTINUOUS

M-MACH-LROT Large rotating machinery (turbine and pump outlines) CONTINUOUS

M-MACH-MOTR Machinery motors CONTINUOUS

M-MATL-CRAN Bridge cranes, jib cranes, and monorails CONTINUOUS

M-MATL-HOIS Hoists and hooks CONTINUOUS

M-MATL-LIFT Miscellaneous lifting equipment CONTINUOUS

M-PENE-FLOR Floor penetrations CONTINUOUS

M-PENE-ROOF Roof penetrations CONTINUOUS

M-PENE-WALL Wall penetrations DASHED

M-PROC-EQPM Equipment CONTINUOUS

M-PROT-CO2D Carbon Dioxide Detector - Wall mount CONTINUOUS

M-PROT-DETR-UNKN Unknown - Detector CONTINUOUS

M-PROT-OXGN Oxygen Detector - Wall Mount CONTINUOUS

M-RCOV-EQPM Equipment CONTINUOUS

M-REFG-EQPM Equipment CONTINUOUS

M-RWTR-EQPM Raw water equipment CONTINUOUS

M-SECT-IDEN Component identification numbers CONTINUOUS

M-SECT-MBND Material beyond section cut CONTINUOUS

M-SECT-MCUT Material cut by section CONTINUOUS

M-SECT-PATT Textures and hatch patterns CONTINUOUS

M-STAT-DEMO-PHS1 Demolition - phase 1 CONTINUOUS

M-STAT-DEMO-PHS2 Demolition - phase 2 STEAML

M-STAT-DEMO-PHS3 Demolition - phase 3 CONTINUOUS

M-STEM-EQPM Equipment CONTINUOUS

P-ANNO-DIMS Witness/Extension Lines, Dimension Terminators, Dimension Text CONTINUOUS

P-ANNO-KEYN Reference Keynotes with Associated Leaders CONTINUOUS

P-ANNO-LEGN Legends and Schedules CONTINUOUS

P-ANNO-MATC Match Lines CONTINUOUS

P-ANNO-NOTE General Notes and Remarks CONTINUOUS

P-ANNO-NPLT Non-plotting Graphic Information CONTINUOUS

P-ANNO-PATT Miscellaneous Patterning and Hatching CONTINUOUS

P-ANNO-REDL Redlines and Markups CONTINUOUS

P-ANNO-REFR Reference files (AutoCAD users only) CONTINUOUS

P-ANNO-REVS Revision Clouds and Symbols CONTINUOUS

P-ANNO-SITE-OTLN Key Plan CONTINUOUS



P-ANNO-SYMB Miscellaneous Symbols CONTINUOUS

P-ANNO-TEXT Miscellaneous Text and Callouts with Associated Leaders CONTINUOUS

P-ANNO-TTLB Title Block CONTINUOUS

P-CMPA-EQPM Equipment CMPAIR

P-CMPA-EQPM-PRGC Pressure Gage and Cock CONTINUOUS

P-CMPA-PIPE Compressed Air Piping CONTINUOUS

P-DETL-GRPH Graphics, gridlines, non-text items CONTINUOUS

P-DETL-INPD Inch-pound-specific dimensions and notes CONTINUOUS

P-DETL-METR Metric-specific dimensions and notes CONTINUOUS

P-DIAG-GRPH Graphics, gridlines, non-text items CONTINUOUS

P-DIAG-INPD Inch-pound-specific dimensions and notes CONTINUOUS

P-DIAG-METR Metric-specific dimensions and notes CONTINUOUS

P-DOMW-ACCS Equipment access doors CLDWTR

P-DOMW-CPIP Domestic cold water piping CLDWTR

P-DOMW-EQPM Hot and cold water equipment CONTINUOUS

P-DOMW-FPIP Domestic filter water piping HWTR

P-DOMW-HPIP Domestic hot water piping TWATRS

P-DOMW-RISR-RISE Domestic hot and cold water risers CONTINUOUS

P-DOMW-TPIP Tempered Water Line CONTINUOUS

P-EQPM-AIRC Air Compressor CONTINUOUS

P-EQPM-BFPR Backflow Preventer CONTINUOUS

P-EQPM-BOIL Boiler CONTINUOUS

P-EQPM-HTEX Heat Exchanger CONTINUOUS

P-EQPM-PUMP Pump CONTINUOUS

P-EQPM-WATC Water Cooler / Fountain CONTINUOUS

P-EQPM-WATR-FLTR Water Filtration Package CONTINUOUS

P-EQPM-WATR-HEAT Water Heater CONTINUOUS

P-EQPM-WATR-SOFT Water Softener CONTINUOUS

P-FLOR-IDEN Room name, space identification text CONTINUOUS

P-FLOR-NUMB Room/space identification number and symbol CONTINUOUS

P-FUEL-EQPM Equipment FUELOS

P-FUEL-FGAS Fuel gas piping NTGASN

P-FUEL-FOIL Fuel oil piping NTGASN

P-FUEL-NGAS Natural gas piping CONTINUOUS

P-LGAS-EQPM Equipment CONTINUOUS



P-LGAS-PIPE Piping CONTINUOUS

P-MDGS-EQPM Equipment CONTINUOUS

P-MDGS-PIPE Piping CONTINUOUS

P-PENE-FLOR Floor penetrations CONTINUOUS

P-PENE-ROOF Roof penetrations CONTINUOUS

P-PENE-WALL Wall penetrations DASHED

P-SANR-COND Condensate piping CONTINUOUS

P-SANR-EQPM Equipment (e.g., sand/oil/water separators) CONTINUOUS

P-SANR-FLDR Floor drains, sinks, and cleanouts CONTINUOUS

P-SANR-PIPE Sanitary Piping CONTINUOUS

P-SANR-RISR Sanitary risers CONTINUOUS

P-SANR-VENT Vent piping SFCWTR

P-SOFT-DWTR-ELTD Turned Down Elbow CONTINUOUS

P-SOFT-WTRP Soft Water Line CONTINUOUS

P-STAT-DEMO-PHS1 Demolition - phase 1 CONTINUOUS



P-STRM-PIPE Storm drain pipe DASHED

P-STRM-RFDR-RFDN Roof Drain CHAIN

P-STRM-RISR Storm drain risers CONTINUOUS

S-ACCS-EVTR Elevators CONTINUOUS

S-ACCS-STRS Stairs CONTINUOUS

S-ACCS-STRS-FRMG Stair framing CONTINUOUS

S-ACCS-TUNL Tunnels CONTINUOUS

S-ANNO-DIMS Witness/extension lines, dimension terminators and text, symbols CONTINUOUS

S-ANNO-KEYN Reference keynotes with associated leaders CONTINUOUS

S-ANNO-NOTE General notes and general remarks CONTINUOUS

S-ANNO-NPLT Non-plotting graphic information CONTINUOUS

S-ANNO-PATT Miscellaneous patterning and hatching CONTINUOUS

S-ANNO-REFR Reference files (AutoCAD users only, see Chapter 4) CONTINUOUS

S-ANNO-SYMB Reference bubbles, matchlines and breaklines CONTINUOUS

S-ANNO-TEXT Miscellaneous text and callouts with associated leaders CONTINUOUS

S-BEAM-CNTR-FRAM Beam centerlines CONTINUOUS

S-BEAM-PRIM-FRAM Primary beams, girders CONTINUOUS

S-BEAM-SECD-FRAM Secondary beams, girders CONTINUOUS



S-BRAC-LATL Lateral bracing CONTINUOUS

S-BRAC-SHEA Shear walls CONTINUOUS

S-BRAC-VERT Vertical bracing CONTINUOUS

S-BRDG-BEAR Bridge bearing CONTINUOUS

S-BRDG-CURB Curbs/sidewalks on structure CONTINUOUS

S-COLS-CNTR Column centerlines/working lines CHAIN

S-COLS-CNTR-CNIN Centerline Symbol CONTINUOUS

S-COLS-MSC1 Miscellaneous columns (Type 1) CONTINUOUS




S-COLS-POST Short columns CONTINUOUS

S-COLS-PRIM Primary columns CONTINUOUS

S-COLS-PRIM-CMFL Fluted Concrete Block, 8 X 8 X 16 CONTINUOUS

S-COLS-RBAR Column rebar CONTINUOUS

S-COLS-SCND-CMFL Fluted Concrete Block, 8 X 8 X 16 CONTINUOUS

S-COLS-SECD Secondary columns CONTINUOUS

S-DECK-FLOR Floor deck CONTINUOUS

S-DECK-OPEN Openings and penetrations CONTINUOUS

S-DECK-RBAR Deck/slab reinforcing CONTINUOUS

S-DECK-ROOF Roof deck CONTINUOUS

S-DETL-GRPH Graphics, gridlines, non-text items CONTINUOUS

S-DETL-INPD Inch-pound-specific dimensions and notes CONTINUOUS

S-DETL-METR Metric-specific dimensions and notes CONTINUOUS

S-FEAT-CMUW CMU outline (no patterning) CONTINUOUS

S-FEAT-CNTR Feature centerlines CONTINUOUS

S-FEAT-CONC Concrete outline (no patterning) CONTINUOUS

S-FEAT-GENL General features CHAIN

S-FEAT-WOOD Wood outline (no patterning) CONTINUOUS

S-FNDN-ANCH Anchor piles, blocks, strands, deadmen, soil/rock anchors CONTINUOUS

S-FNDN-CNTR Beam centerlines CONTINUOUS

S-FNDN-FTNG Footings CONTINUOUS

S-FNDN-GRBM Grade beams CONTINUOUS

S-FNDN-PEDS Column pedestals CONTINUOUS

S-FNDN-PILE Piles (steel sheet, concrete, wood), piers, caisson piers, drilled piers CONTINUOUS



S-FNDN-RBAR Foundation reinforcing CONTINUOUS

S-FNDN-TUNL Service tunnel/duct banks CONTINUOUS

S-GATE-AXIS Gate axis and centerlines CHAIN

S-GATE-MISC Gates incidental to structure CONTINUOUS

S-GATE-WALK Walkway CONTINUOUS

S-GRAT-ELEV Elevated grating (catwalks) CONTINUOUS

S-GRAT-FLOR Floor grating DASHED_SPACED

S-GRAT-SUBS Subsurface grating CONTINUOUS

S-GRDL-EXGL Existing ground line CONTINUOUS

S-GRDL-FNGR Finished grade CHAIN

S-GRDL-WATR Water surface CONTINUOUS

S-GRID-HORZ Primary grid lines (horizontal) CONTINUOUS

S-GRID-HORZ-IDEN Column I.D. tags (horizontal) CONTINUOUS

S-GRID-IDEN-COIN Column Line/Grid Indicator CONTINUOUS

S-GRID-MSC1 Miscellaneous grid lines (Type 1) CONTINUOUS


S-GRID-MSC3 Miscellaneous grid lines (Type 3) CHAIN


S-GRID-VERT Primary grid lines (vertical) CONTINUOUS

S-GRID-VERT-IDEN Column I.D. tags (vertical) CONTINUOUS

S-JOIN-CNST Construction joints CONTINUOUS

S-JOIN-CTRL Control/expansion joints CONTINUOUS

S-JOIS-BRDG Bridging CONTINUOUS

S-JOIS-PRIM Primary joists CONTINUOUS

S-JOIS-SECD Secondary joists CONTINUOUS

S-METL-MISC Miscellaneous metal CONTINUOUS

S-OPEN-MISC Openings and penetrations CONTINUOUS

S-OTLN-BLDG Building outline DASHED_DOUBLE-DOTTED

S-OTLN-FLOR Floor outline DASHED_DOUBLE-DOTTED

S-OTLN-OPNG Openings DASHED_DOUBLE-DOTTED

S-OTLN-ROOF Roof DASHED_DOUBLE-DOTTED

S-OTLN-STRC Misc. structures DASHED_DOUBLE-DOTTED

S-PADS-EQPM Equipment pads CONTINUOUS

S-PIPE-GATE Gates (flap gates, sluice gates, etc.) CONTINUOUS

S-PIPE-MISC Miscellaneous piping/culverts CONTINUOUS



S-PIPE-TRSH Trash racks CONTINUOUS

S-REIN-RBAR Rebar, welded wire mesh CONTINUOUS

S-SAFE-FENC Fencing CONTINUOUS

S-SAFE-HRAL Handrails CONTINUOUS

S-SIGN-EXTN Extrusions CONTINUOUS

S-SIGN-FRMG Framing & connections CONTINUOUS

S-SIGN-GAGE Staff gages CONTINUOUS

S-SIGN-PANL Sign panels CONTINUOUS

S-SIGN-SPRT Supports CONTINUOUS

S-SIGN-TEXT Signage text CONTINUOUS

S-SLAB-EDGE Edge of slab CONTINUOUS

S-SLAB-RBAR Slab reinforcing CONTINUOUS

S-SPPT-MISC Miscellaneous fasteners, anchor bolts, supports CONTINUOUS

S-SPPT-SHPS Miscellaneous shapes, plates CONTINUOUS

S-STRS-FRAM Stair/elevator framing CONTINUOUS

S-STRS-LADD Ladders, ladder handrails, safety guard, grab bars CONTINUOUS

S-STRS-RBAR Stair reinforcing CONTINUOUS

S-TRUS-PRIM Primary trusses CONTINUOUS

S-TRUS-SECD Secondary trusses CONTINUOUS

S-WALL-ABUT Abutments CONTINUOUS

S-WALL-CELL Cell CONTINUOUS

S-WALL-COFF Cutoff wall CONTINUOUS

S-WALL-CONC Concrete walls CONTINUOUS

S-WALL-CURT Curtain/breast wall CONTINUOUS

S-WALL-FULL Wall going to the top of the structure CONTINUOUS

S-WALL-GARD Guard/guide walls CONTINUOUS

S-WALL-HBAR-FRAM Horizontal/secondary reinforcement CONTINUOUS

S-WALL-LOAD Load bearing CMU walls CONTINUOUS

S-WALL-MONO Wall monoliths CONTINUOUS

S-WALL-MSE~ Mechanically stabilized earth (MSE) wall CONTINUOUS

S-WALL-NONL Non-load bearing CMU walls CONTINUOUS

S-WALL-PCST Precast walls CONTINUOUS

S-WALL-PRHT Wall that does not reach to the top of the structure CONTINUOUS

S-WALL-RBAR Wall reinforcing CONTINUOUS

S-WALL-RTWL Retaining wall (flood walls, wingwalls, etc.) CONTINUOUS



S-WALL-SHEA Shear walls CONTINUOUS

S-WALL-STUD Stud walls CONTINUOUS

S-WALL-VBAR-FRAM Vertical/primary reinforcement CONTINUOUS

S-WATR-SURF Water surface CONTINUOUS

T-ALRM-EQPM-SECU Security Alarm Equipment CONTINUOUS

T-ANNO-DIMS Witness/Extension Lines, Dimension Terminators, Dimension Text CONTINUOUS

T-ANNO-KEYN Reference Keynotes with Associated Leaders CONTINUOUS

T-ANNO-LEGN Legends and Schedules CONTINUOUS

T-ANNO-MATC Match Lines CONTINUOUS

T-ANNO-NOTE General Notes and Remarks CONTINUOUS

T-ANNO-NPLT Non-plotting Graphic Information CONTINUOUS

T-ANNO-PATT Miscellaneous Patterning and Hatching CONTINUOUS

T-ANNO-REDL Redlines and Markups CONTINUOUS

T-ANNO-REFR Reference files (AutoCAD users only, see Chapter 4) CONTINUOUS

T-ANNO-REVS Revision Clouds and Symbols CONTINUOUS

T-ANNO-SITE-OTLN Key Plan CONTINUOUS

T-ANNO-SYMB Miscellaneous Symbols CONTINUOUS

T-ANNO-TEXT Miscellaneous Text and Callouts with Associated Leaders DASHED

T-ANNO-TEXT-FUTR Text for Future Objects CONTINUOUS

TANNO-TEXT-TTLB Title Block Text CONTINUOUS

T-ANNO-TTLB Title Block FIBOPT

T-CABL-COAX Coax cable CONTINUOUS

T-CABL-FIBR Fiber optics cable CONTINUOUS

T-CABL-IDEN Cable identifiers CONTINUOUS

T-CABL-MULT Multi-conductor cable CONTINUOUS

T-CABL-TRAY Cable tray and wireway symbols CONTINUOUS

T-COMM-ANTN Telecommunications antennae CONTINUOUS

T-COMM-APSY Audio paging system CONTINUOUS

T-COMM-ATMS Advanced traffic management system CONTINUOUS

T-COMM-AVID Automatic vehicle identification system CONTINUOUS

T-COMM-BIDS Baggage information display system CONTINUOUS

T-COMM-FIDS Flight information display system CONTINUOUS

T-COMM-GIDS Gate information display system CONTINUOUS

T-COMM-JBOX Junction boxes CONTINUOUS

T-COMM-PMRC Parking management and revenue control CONTINUOUS



T-COMM-VPSY Visual paging system CONTINUOUS

T-CTRL-PANL-ACCS Access Control Panel CONTINUOUS

T-DIAG-GRPH Graphics, gridlines, non-text items CONTINUOUS

T-DIAG-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

T-DIAG-INPD Inch-pound-specific dimensions and notes CONTINUOUS

T-DIAG-METR Metric-specific dimensions and notes CONTINUOUS

T-DISC-INFO Information and notes for other disciplines CONTINUOUS

T-EMER-DURE Emergency Duress Unit CONTINUOUS

T-EQPM-CAMS CCTV Camera CONTINUOUS

T-EQPM-COMB Distribution equipment for both copper and fiber optics CONTINUOUS

T-EQPM-COPP Distribution equipment for copper CONTINUOUS

T-EQPM-FIBR Distribution equipment for fiber optic CONTINUOUS

T-EQPM-MCPH Microphone CONTINUOUS

T-EQPM-MNTR Monitor CONTINUOUS

T-EQPM-MNTR-CCTV CCTV Monitor CONTINUOUS

T-EQPM-OTHR Other telecommunications equipment CONTINUOUS

T-EQPM-PHON-PAGE Paging System Phone CONTINUOUS

T-EQPM-PHON-PUBL Public Pay Phone CONTINUOUS

T-EQPM-RELA Relays, resistors, capacitors, and inducers CONTINUOUS

T-EQPM-SPKR Speaker CONTINUOUS

T-FLOR-IDEN Room name, space identification text CONTINUOUS

T-FLOR-NUMB Room/space identification number and symbol CONTINUOUS

T-JACK-COMB Combination telephone and data/LAN jacks CONTINUOUS

T-JACK-DATA Data/LAN jacks CONTINUOUS

T-JACK-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

T-JACK-PHON Telephone jacks CONTINUOUS

T-STAT-DEMO-PHS1 Demolition - phase 1 CHAIN_DOUBLE-DASHED

T-STAT-DEMO-PHS2 Demolition - phase 2 CONTINUOUS

T-STAT-DEMO-PHS3 Demolition - phase 3 CONTINUOUS

V-AERI-BNDY Aerial photography boundaries CONTINUOUS

V-AERI-IDEN Aerial annotation CONTINUOUS

V-AERI-INDX Aerial photo index CONTINUOUS

V-AERI-PATH Aerial flight lines/paths CONTINUOUS

V-AERI-PHOT Photo center (exposure station) CONTINUOUS

V-AERI-PNPT Panel points CONTINUOUS



V-AFLD-BCNS-IDEN Identifier tags, symbol modifiers, and text CONTINUOUS

V-AFLD-BCNS-MISC Miscellaneous navaids - wind cones and beacons CONTINUOUS

V-AFLD-BCNS-STRB Strobe beacons CONTINUOUS

V-AFLD-IDEN Airfield annotation CONTINUOUS

V-AFLD-JBOX Junction boxes, pull boxes, manholes, handholes, pedestals, splices CONTINUOUS

V-AFLD-LITE-APPR Approach lights CONTINUOUS

V-AFLD-LITE-DIST Distance and arresting gear markers CONTINUOUS

V-AFLD-LITE-LANE Hoverlane, taxilane, and helipad lights CONTINUOUS

V-AFLD-LITE-OBST Obstruction lights CONTINUOUS

V-AFLD-LITE-RUNW Runway lights CONTINUOUS

V-AFLD-LITE-SIGN Taxiway guidance signs CONTINUOUS

V-AFLD-LITE-TAXI Taxiway lights CONTINUOUS

V-AFLD-LITE-THRS Threshold lights CONTINUOUS

V-AIRF-DEVC Capacitors, voltage regulators, motors, buses, generators, meters, etc. CONTINUOUS

V-AIRF-DUCT Ductbanks CONTINUOUS

V-ALGN-DATA Alignment coordinates and curve data CONTINUOUS

V-ALGN-LINE Alignments CONTINUOUS

V-ALGN-MARK Alignment tick marks CONTINUOUS

V-ALGN-STAT-FUEL Alignment stationing and tick marks CONTINUOUS

V-ALGN-STAT-HTCW Alignment stationing and tick marks CONTINUOUS

V-ALGN-STAT-INDW Alignment stationing and tick marks CONTINUOUS

V-ALGN-STAT-NGAS Alignment stationing and tick marks CONTINUOUS

V-ALGN-STAT-SANR Alignment stationing and tick marks CONTINUOUS

V-ALGN-STAT-STRM Alignment stationing and tick marks CONTINUOUS

V-ANNO-DIMS Witness/extension lines, dimension terminators, dimension text CONTINUOUS

V-ANNO-KEYN Reference keynotes with associated leaders CONTINUOUS

V-ANNO-NOTE General notes and general remarks CONTINUOUS

V-ANNO-NPLT Non-plotting graphic information CONTINUOUS

V-ANNO-PATT Miscellaneous patterning and hatching CONTINUOUS

V-ANNO-REFR Reference files (AutoCAD users only, see Chapter 4) CONTINUOUS

V-ANNO-SYMB Miscellaneous symbols CONTINUOUS

V-ANNO-TEXT Miscellaneous text and callouts with associated leaders CONTINUOUS

V-APRN-HOLD Holding position markings CONTINUOUS

V-APRN-IDEN Airfield apron - annotation CONTINUOUS

V-APRN-MRKG Apron markings CONTINUOUS



V-APRN-OTLN Airfield apron - outlines CONTINUOUS

V-APRN-SECU Security zone markings CONTINUOUS

V-APRN-SHLD Shoulders with annotation CONTINUOUS

V-APRN-SHLD-MRKG Shoulder stripes CONTINUOUS

V-BCNS-STRB Strobe beacons CONTINUOUS

V-BLDG-DECK Outdoor decks (attached, no roof overhead) CONTINUOUS

V-BLDG-DOCK Loading docks CONTINUOUS

V-BLDG-IDEN Building and other structure annotation CONTINUOUS

V-BLDG-OTLN Buildings and other structures CONTINUOUS

V-BLDG-OVHD Building overhangs CONTINUOUS

V-BLDG-PRCH Porches (attached, roof overhead) CONTINUOUS

V-BRDG-DECK Bridge deck CONTINUOUS

V-BRDG-IDEN Bridge annotation CONTINUOUS

V-BRDG-OTLN Bridge outlines CONTINUOUS

V-CATH-ANOD Sacrificial anode system CONTINUOUS

V-CATH-CURR Impress current system CONTINUOUS

V-CATH-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-CATH-TEST Test stations CONTINUOUS

V-CHAN-CNTR Channel centerline and survey report lines CONTINUOUS

V-CHAN-CNTR-IDEN Channel centerline and survey report lines - annotation CONTINUOUS

V-CHAN-DACL De-authorized channel limits, anchorages, etc. CONTINUOUS

V-CHAN-DACL-IDEN De-authorized channel limits, anchorages, etc. - annotation CONTINUOUS

V-CHAN-LIMT Channel limits, anchorages, turning basins, disposal areas, etc. CONTINUOUS

V-CIRC-MULT Multiple circuits CONTINUOUS

V-CIRC-SERS Series circuits CONTINUOUS

V-COMM-ANNO Communications Equipment Text CONTINUOUS

V-COMM-EQPM Other communications distribution equipment COMARX

V-COMM-JBOX-CMHL Existing Communication Manhole COMUGX

V-COMM-OVHD Overhead communication/telephone lines CONTINUOUS

V-COMM-OVHD-IDEN Identifier tags, symbol modifier and text CONTINUOUS

V-COMM-UNDR Underground communication/telephone lines CONTINUOUS

V-COMM-UNDR-IDEN Identifier tags, symbol modifier and text CONTINUOUS

V-DOMW-ABND Abandoned piping CONTINUOUS

V-DOMW-ANNO Annotation CONTINUOUS

V-DOMW-DEVC Connectors, faucets, vents, taps, backflow preventers, valves, etc. CONTINUOUS



V-DOMW-DEVC-FPIV Water Valve-Fire FIRE

V-DOMW-DEVC-WELL Well CONTINUOUS

V-DOMW-DEVC-WPIT Water Pit CONTINUOUS

V-DOMW-DEVC-WVAL Water Valve CONTINUOUS

V-DOMW-FIRE Fire lines CONTINUOUS

V-DOMW-FTTG Caps, cleanouts, crosses, and tees WATRX

V-DOMW-HYDR-HYDR Hydrant CONTINUOUS

V-DOMW-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-DOMW-MAIN Main domestic water piping CONTINUOUS

V-DOMW-METR-WMTR Water Meter NONPOT

V-DOMW-NHYD Non-potable hydrants/flushing hydrants CONTINUOUS

V-DOMW-NPOT Non-potable water piping CONTINUOUS

V-DOMW-PITS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-DOMW-PUMP-PMST Pump Station CONTINUOUS

V-DOMW-REDC Pressure reducing station CONTINUOUS

V-DOMW-RSVR Reservoirs CONTINUOUS

V-DOMW-SERV Domestic water service piping CONTINUOUS

V-DOMW-SIGN Surface markers/signs CONTINUOUS

V-DOMW-STNS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-DOMW-TANK Water storage tanks CONTINUOUS

V-DOMW-VENT Vent pits CONTINUOUS

V-DOMW-VLVE-WVLV Water Valve Vault CONTINUOUS

V-DOMW-WELL Water well houses CONTINUOUS

V-DUCT-MULT Ductbank CONTINUOUS

V-DUCT-MULT-COMM Ductbanks CONTINUOUS

V-DUCT-MULT-DBID Ductbank ID Symbol CONTINUOUS

V-DUCT-MULT-ELEC Ductbanks EUDUCX

V-DUCT-MULT-IDEN Ductbank ID Symbol CONTINUOUS

V-ELEC-SUBS-SBST Substation CONTINUOUS

V-ELEC-SWCH Fuse cutouts, switches, circuit breakers, reclosers, etc. CONTINUOUS

V-ELEC-SWCH-SWCH Existing Switch DASHED

V-FUEL-ABND Abandoned piping CONTINUOUS

V-FUEL-DEFL Defueling piping CONTINUOUS

V-FUEL-DEVC Srainers, hydrant fill points, oil/water separators, tanks, valves, etc. CONTINUOUS

V-FUEL-FLOW Flow direction arrows CONTINUOUS



V-FUEL-FTTG Caps, crosses, and tees CONTINUOUS

V-FUEL-HYDR Hydrant control pits CONTINUOUS

V-FUEL-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-FUEL-JBOX-FOML Fuel Oil Manhole CONTINUOUS

V-FUEL-MAIN Main fuel piping CONTINUOUS

V-FUEL-METR-FOMR Fuel Oil Meter CONTINUOUS

V-FUEL-PITS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-FUEL-PUMP Booster pump stations CONTINUOUS

V-FUEL-SERV Service piping CONTINUOUS

V-FUEL-STNS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-FUEL-TANK-TKAG Tank, Horizontal Above Ground CONTINUOUS

V-FUEL-TANK-TKBG Tank, Below Ground CONTINUOUS

V-FUEL-TRCH Fuel line trench CONTINUOUS

V-FUEL-VENT Vent pits CONTINUOUS

V-FUEL-VLVE Valve pits CONTINUOUS

V-GRAD-AFTR After dredge depth CONTINUOUS

V-GRAD-EXST Existing grade, ground line CONTINUOUS

V-GRAD-EXST-BASE Base survey DASHED

V-GRAD-EXST-SYR1 Survey year one or area one DASHED_DOTTED

V-GRAD-EXST-SYR2 Survey year two or area two DASHED_TRIPLICATE-DOTTED V-GRAD-EXST-SYR3 Survey year three or area three DASHED_DOUBLE-DOTTED

V-GRAD-EXST-SYR4 Survey year four or area four DASHED_SPACED

V-GRAD-IDEN Grade annotation CONTINUOUS

V-GRAD-PRED Pre-dredge CONTINUOUS

V-GRAD-SCLN Stability control line CHAIN

V-GRID-FRAM Frame CONTINUOUS

V-GRID-MAJR Major grid lines CONTINUOUS

V-GRID-MINR Minor grid lines CONTINUOUS

V-GRID-TEXT Border text, annotation CONTINUOUS

V-GTHP-EQPM Equipment DASHED

V-GTHP-PIPE Piping (includes fittings, valves) CONTINUOUS

V-HTCW-ABND Abandoned piping CONTINUOUS

V-HTCW-CHLL Main chilled water piping CONTINUOUS

V-HTCW-CHLP-WAPL Water Plant CONTINUOUS

V-HTCW-CHLS Chilled water service piping CONTINUOUS



V-HTCW-DEVC Rigid anchors, reducers, pumps, regulators, tanks, valves, etc. CONTINUOUS

V-HTCW-FLOW Flow direction arrows CONTINUOUS

V-HTCW-FTTG Caps and flanges CONTINUOUS

V-HTCW-HTPL Main high temperature piping CONTINUOUS

V-HTCW-HTPP High temperature water plant CONTINUOUS

V-HTCW-HTPS High temperature service piping CONTINUOUS

V-HTCW-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-HTCW-JBOX Junction boxes, manholes, handholes, test boxes CONTINUOUS

V-HTCW-LTPL Main low temperature piping CONTINUOUS

V-HTCW-LTPS Low temperature service piping CONTINUOUS

V-HTCW-PITS-STPT Steam Pit CONTINUOUS

V-HTCW-PLNT-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-HTCW-PUMP-PMST Pump Station CONTINUOUS

V-HTCW-RTRN Return for all HTCW lines CONTINUOUS

V-HTCW-STML Main steam piping DASHED

V-HTCW-STMS Steam service piping CONTINUOUS

V-HTCW-STNS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-INDW-ABND Abandoned piping CONTINUOUS

V-INDW-DEVC-GRCH Grit Chamber CONTINUOUS

V-INDW-DEVC-IWMR Industrial Waste Meter CONTINUOUS

V-INDW-FLOW Flow direction arrows CONTINUOUS

V-INDW-FTTG-CLOT Cleanout CONTINUOUS

V-INDW-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-INDW-JBOX-IWMH Industrial Waste Manhole CONTINUOUS

V-INDW-LAGN Lagoons IWASTE

V-INDW-LIFT Lift stations CONTINUOUS

V-INDW-MAIN Main industrial waste water piping CONTINUOUS

V-INDW-PLNT Treatment plants CONTINUOUS

V-INDW-SERV Industrial waste water service piping CONTINUOUS

V-INDW-SIGN Surface markers/signs CONTINUOUS

V-INDW-STNS-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-LITE-APPR Approach lights CONTINUOUS

V-LITE-APPR-ALEL Elevated Approach Lightbar CONTINUOUS

V-LITE-APPR-ALSF Semiflush Approach Lightbar CONTINUOUS

V-LITE-APPR-PAPI PAPI Light Unit CONTINUOUS



V-LITE-DIST Distance and arresting gear markers CONTINUOUS

V-LITE-DIST-DMKR Runway Distance Marker CONTINUOUS

V-LITE-FIXT-LTFL Floodlight CONTINUOUS

V-LITE-LANE Hoverlane, taxilane, and helipad lights CONTINUOUS

V-LITE-OBST Obstruction lights CONTINUOUS

V-LITE-RUNW-CNTL Abandoned piping CONTINUOUS

V-LITE-RUNW-TDZN Threshold lights CONTINUOUS

V-LITE-SIGN Taxiway guidance signs CONTINUOUS

V-LITE-SIGN-TWSN Taxiway Guidance Sign CONTINUOUS

V-LITE-TAXI Identifier tags, symbol modifier, and text CONTINUOUS

V-LITE-THRS Flow direction arrows CONTINUOUS

V-NGAS-ABND Abandoned piping CONTINUOUS

V-NGAS-DEVC Identifier tags, symbol modifier, and text CONTINUOUS

V-NGAS-DEVC-IDEN Main natural gas piping CONTINUOUS

V-NGAS-FLOW Flow direction arrows NTGASX

V-NGAS-FTTG Caps, crosses, and tees CONTINUOUS

V-NGAS-IDEN Compressor stations CONTINUOUS

V-NGAS-MAIN Main natural gas piping CONTINUOUS

V-NGAS-METR-GSMT Gas Meter CONTINUOUS

V-NGAS-PITS-IDEN Surface markers/signs CONTINUOUS

V-NGAS-PUMP Compressor stations CONTINUOUS

V-NGAS-REDC Reducing stations CONTINUOUS

V-NGAS-SERV Service piping CONTINUOUS

V-NGAS-SIGN Surface markers/signs CONTINUOUS

V-NGAS-STNS-IDEN Guying equipment identifier tags, symbol modifiers, and text CONTINUOUS

V-NGAS-VENT Vent pits CONTINUOUS

V-NGAS-VLVE-GVAL Gas Valve Vault CONTINUOUS

V-OBST-AIRS Airspace obstructions CONTINUOUS

V-OBST-AIRS-IDEN Airspace obstruction annotation CONTINUOUS

V-OVRN-IDEN Airfield overrun area - annotation CONTINUOUS

V-OVRN-OTLN Airfield overrun area - outlines CONTINUOUS

V-OVRN-SHLD-MRKG Shoulder markings CONTINUOUS

V-POLE-GUYS-COMM Guying equipment CONTINUOUS

V-POLE-GUYS-DGXC Down Guy CONTINUOUS

V-POLE-GUYS-DGXE Down Guy CONTINUOUS



V-POLE-GUYS-ELEC Guying equipment CONTINUOUS

V-POLE-UTID-PIDC Pole Identification Symbol CONTINUOUS

V-POLE-UTID-PIDE Pole Identification Symbol CONTINUOUS

V-PRIM-OVHD Overhead electrical utility lines CONTINUOUS

V-PRIM-OVHD-IDEN New work, grading fills CONTINUOUS

V-PRIM-UNDR Underground electrical utility lines CONTINUOUS

V-PRIM-UNDR-IDEN Manholes CONTINUOUS

V-PRKG-IDEN Parking lot annotation CONTINUOUS

V-PRKG-OTLN Parking lot outlines CONTINUOUS

V-PRKG-SIGN Signs CONTINUOUS

V-PROP-ANNO Property Information CONTINUOUS

V-PROP-BNDY Property Frame CONTINUOUS

V-PROP-BRNG Lease line (surveyed) CONTINUOUS

V-PROP-CNTY County Line DASHED_SPACED

V-PROP-ESMT Government easements/property lines CONTINUOUS

V-PROP-IDEN Municipal Boundary CONTINUOUS

V-PROP-LEAS Quarter lines CONTINUOUS

V-PROP-LINE Property lines (existing recorded plats) CONTINUOUS

V-PROP-LUSE Section lines CONTINUOUS

V-PROP-MUNI State Boundary CONTINUOUS

V-PROP-QTRS Quarter lines CHAIN

V-PROP-RWAY Right of ways CONTINUOUS

V-PROP-SECT Section lines CONTINUOUS

V-PROP-STAT Pavement markings CONTINUOUS

V-PROP-SXTS Sixteenth lines (40 lines) CONTINUOUS

V-PROP-TSHP Township Line CONTINUOUS

V-PROP-ZONG Roads, parking lots, railroads, airfield pavements CONTINUOUS

V-PVMT-ASPH Pavement pattern - asphalt CONTINUOUS

V-PVMT-CONC Pavement pattern - concrete CONTINUOUS

V-PVMT-GRVL Pavement pattern - gravel CONTINUOUS

V-PVMT-IDEN Overhead electrical utility lines CONTINUOUS

V-PVMT-MRKG Pavement markings and signs CONTINUOUS

V-PVMT-PATT Underground electrical utility lines CONTINUOUS

V-PVMT-ROAD Roads, parking lots, railroads, airfield pavements ESUGX

V-RAIL-CNTR Railroad track centerlines CHAIN



V-RAIL-CNTR-IDEN Railroad track centerline annotation CONTINUOUS

V-RAIL-TRAK Railroad tracks RAILRD

V-ROAD-ASPH Road outlines - asphalt surface CONTINUOUS

V-ROAD-CNTR Road centerlines CHAIN

V-ROAD-CNTR-IDEN Road centerline annotation CONTINUOUS

V-ROAD-CONC Road outlines - concrete surface CONTINUOUS

V-ROAD-GRVL Road outlines - gravel surface CONTINUOUS

V-ROAD-IDEN Road, street, highway annotation CONTINUOUS

V-ROAD-OTLN Road outlines CONTINUOUS

V-ROAD-SIGN Signs CONTINUOUS

V-ROAD-UPVD Road outlines - unpaved surface CONTINUOUS

V-RUNW-BLST Blast pad and stopway markings CONTINUOUS

V-RUNW-CNTR Centerlines CHAIN

V-RUNW-CNTR-MRKG Centerline markings CONTINUOUS

V-RUNW-DISP Displaced threshold markings CONTINUOUS

V-RUNW-DIST Fixed distance markings CONTINUOUS

V-RUNW-EDGE Airfield runway edges CONTINUOUS

V-RUNW-IDEN Airfield runway annotation CONTINUOUS

V-RUNW-SHLD Shoulder markings CONTINUOUS

V-RUNW-SIDE Side stripes CONTINUOUS

V-RUNW-TDZM Touchdown zone markers CONTINUOUS

V-RUNW-THRS Threshold markers CONTINUOUS

V-SECD-OVHD-IDEN Material beyond section cut CONTINUOUS

V-SECD-UNDR Underground electrical utility lines CONTINUOUS

V-SECD-UNDR-IDEN Textures and hatch patterns CONTINUOUS

V-SECT-IDEN Riprap, revetments/stone protection, breakwaters, dikes, etc. CONTINUOUS

V-SECT-MBND Water features CONTINUOUS

V-SECT-MCUT Fences and handrails CONTINUOUS

V-SECT-PATT Fence, handrail, ramp, and trail annotation CONTINUOUS

V-SITE-EROS Riprap, revetments/stone protection, breakwaters, dikes, etc. CONTINUOUS

V-SITE-EWAT Water features CONTINUOUS

V-SITE-FENC Fences and handrails CONTINUOUS

V-SITE-FENC-IDEN Stairs and ramps CONTINUOUS

V-SITE-IDEN Existing treelines and vegetation CONTINUOUS

V-SITE-OTLN Existing site features (play structures, bike racks, benches, etc.) CONTINUOUS



V-SITE-STRC Structures (bridges, sheds, foundation pads, footings, etc.) CONTINUOUS

V-SITE-STRS Stairs and ramps CONTINUOUS

V-SITE-VEGE Existing treelines and vegetation CONTINUOUS

V-SITE-WALK Walks, trails, and bicycle paths CONTINUOUS

V-SITE-WATR Traffic signal identifier tags, symbol modifier, and text CONTINUOUS

V-SPCL-SYST Special systems (UMCS, EMCS, CATV) CONTINUOUS

V-SPCL-SYST-DISH Satelite Dish CONTINUOUS

V-SPCL-TRAF Identifier tags, symbol modifier, and text CONTINUOUS

V-SPCL-TRAF-IDEN Filtration beds CONTINUOUS

V-SSWR-ABND Abandoned piping CONTINUOUS

V-SSWR-ANNO Annotation CONTINUOUS

V-SSWR-DEVC-GRCH Grit Chamber CONTINUOUS

V-SSWR-DEVC-GRSE Grease Trap CONTINUOUS

V-SSWR-DEVC-IDEN Caps and cleanouts CONTINUOUS

V-SSWR-DEVC-UNKN Unknown Device CONTINUOUS

V-SSWR-FILT Filtration beds CONTINUOUS

V-SSWR-FILT-IDEN Junction boxes and manholes CONTINUOUS

V-SSWR-FLOW Flow direction arrows CONTINUOUS

V-SSWR-FTTG-CNOT Cleanout CONTINUOUS

V-SSWR-IDEN Leach field CONTINUOUS

V-SSWR-JBOX Junction boxes and manholes CONTINUOUS

V-SSWR-JBOX-IDEN Nitrification drain fields CONTINUOUS

V-SSWR-JBOX-SNMH Sanitary Manhole CONTINUOUS

V-SSWR-LAGN Lagoons CONTINUOUS

V-SSWR-LEAC Leach field SSWAFX

V-SSWR-LFSTA-LFSTA Lift Station CONTINUOUS

V-SSWR-MAIN Sanitary sewer piping CONTINUOUS

V-SSWR-NITF Nitrification drain fields CONTINUOUS

V-SSWR-PLNT Treatment plants CONTINUOUS

V-SSWR-PUMP-PMST Pump Station CONTINUOUS

V-SSWR-SERV Sanitary sewer service piping CONTINUOUS

V-SSWR-SIGN Surface markers/signs CONTINUOUS

V-SSWR-STNS-IDEN Future work CONTINUOUS

V-SSWR-TANK-SPTK Septic Tank CONTINUOUS

V-STRC-OTLN Bridges, piers, breakwaters, docks, floats, etc. - outlines CONTINUOUS



V-STRC-TOWR Culverts CONTINUOUS

V-STRM-ABND Abandoned piping CONTINUOUS

V-STRM-AFFF AFFF lagoon/detention pond CONTINUOUS

V-STRM-CHUT Chutes and concrete erosion control structures CONTINUOUS

V-STRM-CULV-CLVE Culvert CONTINUOUS

V-STRM-DEVC Downspouts, flumes, oil/water separators, and flap gates CONTINUOUS

V-STRM-DEVC-GRAT Grate CONTINUOUS

V-STRM-EROS Erosion control (riprap) CONTINUOUS

V-STRM-FLOW Flow direction arrows CONTINUOUS

V-STRM-FMON Flow monitoring station CONTINUOUS

V-STRM-FTTG-CNOT Cleanout CONTINUOUS

V-STRM-HDWL-HDWL Headwall CONTINUOUS

V-STRM-IDEN Manholes CONTINUOUS

V-STRM-INLT-CBSN Catch Basin STRAFX

V-STRM-INLT-CBSR Round Catch Basin CONTINUOUS

V-STRM-LAGN Lagoons, ponds, watersheds, and basins CONTINUOUS

V-STRM-MAIN Storm sewer piping CONTINUOUS

V-STRM-MHOL-SDMH Storm Drainage Manhole CONTINUOUS

V-STRM-PUMP-PMPS Pump Station CONTINUOUS

V-STRM-ROOF Roof drain line CONTINUOUS

V-STRM-SERV Storm sewer service piping CONTINUOUS

V-STRM-SIGN Surface markers/signs CONTINUOUS

V-STRM-STNS-IDEN Survey, baseline, and control line CONTINUOUS

V-STRM-STRC-CULV Culverts CONTINUOUS

V-STRM-STRC-INLT Inlet CONTINUOUS

V-STRM-SUBS Subsurface drain piping CONTINUOUS

V-SURV-DATA Control Grid CONTINUOUS

V-SURV-IDEN Coordinate grid ticks and text CONTINUOUS

V-SURV-LINE Survey, baseline, and control line DASHED_DOTTED

V-TAXI-CNTR-IDEN Centerline annotation CONTINUOUS

V-TAXI-CNTR-MRKG Centerline markings CONTINUOUS

V-TAXI-EDGE Edge markings CONTINUOUS

V-TAXI-HOLD Holding lines CONTINUOUS

V-TAXI-IDEN Taxiway - annotation CONTINUOUS

V-TAXI-OTLN Taxiway - outlines CONTINUOUS



V-TAXI-SHLD Shoulders with annotation CONTINUOUS

V-TOPO-BKLN DTM points CONTINUOUS

V-TOPO-BORE DTM triangles CONTINUOUS

V-TOPO-COOR Major contours CONTINUOUS

V-TOPO-DTMP Minor contours CONTINUOUS

V-TOPO-DTMT DTM triangles CONTINUOUS

V-TOPO-DTMT-SVPT DTMT Point CONTINUOUS

V-TOPO-MAJR Shorelines, land features, and references CONTINUOUS

V-TOPO-MAJR-IDEN Top/toe slopes CONTINUOUS

V-TOPO-MINR Minor contours CONTINUOUS

V-TOPO-MINR-IDEN Species Site CONTINUOUS

V-TOPO-SHOR Spot elevations CONTINUOUS

V-TOPO-SLOP-FILL Cut/fill slopes CONTINUOUS

V-TOPO-SLOP-IDEN Cut/fill slope, top/toe slope annotation CONTINUOUS

V-TOPO-SLOP-TOPT Top/toe slopes CONTINUOUS

V-TOPO-SOUN Pad mounted transformers CONTINUOUS

V-TOPO-SPEC Identifier tags, symbol modifier, and text CONTINUOUS

V-TOPO-SPOT Pole mounted transformers CONTINUOUS

V-TOPO-UTMG UTM Grid CONTINUOUS

V-TOPO-UTMI UTM Labels CONTINUOUS

V-TOPO-WETL Identifier tags, symbol modifier, and text CONTINUOUS

V-TRAN-PADM-IDEN Identifier tags, symbol modifier, and text CONTINUOUS

V-TRAN-PADM-RPMN Existing Transformer Pad CONTINUOUS

V-TRAN-POLE-XFPL Existing Transformer Pole CONTINUOUS

V-UTIL-ELEC-IDEN Electrical and Telephone Text and Callouts CONTINUOUS

V-UTIL-GASS Gas lines, features, and valves CONTINUOUS


APPENDIX B - PHOENIX AVIATION DEPARTMENT STANDARD SYMBOLS

ARCHITECTURAL

Symbol_Name Description

APKGGATE Parking Automatic Gate

ARCPBW Architectural Particleboard Woodwork

ASBDLS Large Scale Asbestos Board

ASBDSS Small Scale Asbestos Board

ATKTMACH Parking Ticket Machine

BATHCO Corner Bath

BATHEM Emergency Bath

BATHFT Foot Bath

BATHHA Hydrotherapy Arm Bath

BATHHH Hydrotherapy Hubbard Bath

BATHHL Hydrotherapy Leg Bath

BATHIF Infant Bath

BATHIN Institutional Bath

BATHRC Recessed Bath

BATHRR Roll Rim Bath

BATHSZ Sitz Bath

BATHWP Whirlpool Bath

BDGGATE Boarding Gate

BIDET Watercloset Bidet

BIFLDDR48 Bifold Door - Double 48"



BIFLDDRL24 Bifold Door - Single (Left) 24"



BIFLDDRR24 Bifold Door - Single (Right) 24"



BRFACC Brick Face on Common

BRFIRE Fire Brick



BRKGL Glazed Brick

BSSFLG Bluestone / Slate / Soapstone / Flagging

CANWCT Can Washer, Cabinet Type

CANWDT Can Washer, Dish Type

CARPET Carpet and Pad

CHEMANA Chemical Analyzer

CMU Masonry Unit

CMUBLK Concrete Block, 8X8X16

CMUCOR Concrete Block, 8X8X16 Corner

CMUEND Concrete Block, 8X8X16 End

CMUGL Glazed Concrete Block

CMUSTR Concrete Block, 8X8X16 Str.

COILDR102 Coil-up Door - 102"





























CPLANK Concrete Plank

DBLDR102 Double Door - 102"















DBLDRUNEVL60 Double Door - Uneven (Left) 60"

DBLDRUNEVL72 Double Door - Uneven (Left) 72"

DBLDRUNEVR60 Double Door - Uneven (Right) - 60"

DBLDRUNEVR72 Double Door - Uneven (Right) 72"

DFPROJ Drinking Fountain, Projecting Type

DFRECS Drinking Fountain, Recessed Type

DFSREC Drinking Fountain, Semi-Recessed Type

DOORID Door Opening Identifier

DOR18L Left Door, 180 Degree Swing

DOR18R Right Door, 180 Degree Swing

DORBFL Left Bifold Door

DORBFR Right Bifold Door

DORCPV Door Center Pivot

DORCYL Cylindrical Door

DORDBL Left Double Door



DORDBR Right Double Door

DORDEL Left Double Egress Door

DORDER Right Double Egress Door

DORFSL Left Single Full Swing Door

DORFSR Right Single Full Swing Door

DOROVH Overhead Door

DORPOC Door Pocket

DORRUP Roll Up Door

DORSHL Left Single Hinged Door

DORSHR Right Single Hinged Door

DORSLD Sliding Door

DORSLS Sliding Surface Door

DORSPL Left Single Pivot Door

DORSPR Right Single Pivot Door

DORUDL Left Uneven Double Door

DORUDR Right Uneven Dbl. Door

DSHWSH Commercial Dishwasher

EQPMID Equipment Identifier

FASTEN Fastener

FLRRPL Flooring, Resilient Plastic Laminate

FURCHH Furring Channel Hat

FURCHN Furring Channel

GLASLS Large Scale Glass

GLASSS Small Scale Glass

GLBLLS Glass Block, Large Scale

GLBLSS Glass Block, Small Scale

GLELEV Glass Elevation

GPLANK Gypsum Plank

GYPBLK Gypsum Block

GYPPOM Gypsum Plaster on Masonry

GYPPPB Gypsum Plaster Particle Board

GYPSPP Gypsum Solid Plaster Partition

GYPWBD Gypsum Wallboard Finishes

INFBSS Small Scale Flexible Blanket Insulation

INLFLS Large Scale Loose Fill Insulation



INS1RM Insulation, Reflective Metal On 1 Side

INS2RM Insulation, Reflective Curtain 2 Sides (Sm. Scale)

INSFOM Spray Foam Insulation

INSTND Insulation, Type Not Determined (Lg. Scale)

LAVBCK Back Lavatory

LAVCOR Corner Lavatory

LAVCOU Lavatory in Counter

LAVDNT Dental Lavatory

LAVHND Handicapped Lavatory

LAVINT Integral

LAVMDM Med. Manicure Lavatory

LAVOVCT Oval - Countertop

LAVPED Pedestal

LAVRECCT Rectangular - Countertop

LAVSLB Slab Type Lavatory

LAVWM Wall Mount

LINTEL Concrete Beam Bond Lintel

MOPSK Mop Sink

MOPSKCNR Corner Mop Sink

MTLDTR Metal Detector

MTLLPL Metal Lath and Plaster

MTLSHT Metal Sheet and all Metals (Small Scale)

ORISTB Oriented Strand Board

OVHDDR10 Overhead Door - 10 ft






PARTBD Particleboard

PLASTC Plastic Finishes

PLPLLS Large Scale Plastic on Plywood

PLPLSS Small Scale Plastic on Plywood

PLYWLS Large Scale Plywood

PLYWSS Small Scale Plywood



RBIILS Rigid Board on Interior Insulation, Large Scale

RBISLS Insulation, Rigid Board as Sheathing (Lg. Scale)

RFDRN Roof Drain

ROMID3 Room Identifier, 3 char.

ROMID4 Room Identifier, 4 char.

ROTDOR108 Rotating Door - 108" Diameter






SDIRLD Stair Direction Line Down

SDIRLU Stair Direction Line Up

SGLDRL12 Single Door (Left) - 12"


















SGLDRR12 Single Door (Right) - 12"




















SHWRCO Corner Shower

SHWRHD Shower Head

SHWROG Shower Overhead Gang

SHWRPG Shower Pedestal Gang

SHWRST Shower Stall

SIGN Wayfinding

SINKDBLCT Double Bowl Countertop

SINKSCT Single Bowl Countertop

SLDBLDRREC108 Recessed Sliding Door 108"








SLDBLDRSURF108 Surface Mount Sliding Door 108"










SLDRREC36 Single Recessed Mount Sliding Door - 36"








SLDRSURF36 Single Surface Mount Sliding Door - 36"








SLOPE Direction of Line Slope

SNK2BD Double Bowl Sink

SNK2CT Two Compartment Sink

SNKCWT Circular Wash Type Sink

SNKDSP Sink Disposer

SNKFRC Flushing Rim Clinical Sink

SNKGEN General Sink

SNKKLR Kitchen Sink

SNKLDB Sink w/Left Drainboard

SNKLTR Sink Laundry Tray

SNKSCW Semi-Circular Wash Sink

SNKSLP Slop-Type Sink

SNKSRV Service Sink

SNKSSC Surgeon Scrub Sink

STLCSS Structural Clay Tile, Small Scale

SUSPNT Suspension Tee



TC1FLS Terra Cotta Glazed 1 Face (Large Scale)

TC2FSS Terra Cotta Glazed 2 Faces (Small Scale)

TCHOLW Hollow Terra Cotta

TCLS Large Scale Terra Cotta

TCQLS Terra Cotta Quarry

TCUGLS Terra Cotta Unglazed (Large Scale)

TCVENR Veneer Terra Cotta

THRSHD Threshold

TILFSS Small Scale Tile Facing

TILGSC Glazed Structural Clay Tile Masonry

TILSFU Tile Structural Floor Units

TLACOU Acoustical Tile Finishes

TLCRLS Ceramic Tile Finish Large Scale

TRAY1L Single Laundry Tray

TRAY2L Double Laundry Trays

TRSHRECEP Trash Receptacle (Big Silver)

URFM Floor Mounted

URNLCO Corner Type Urinal

URNLPD Pedestal Type Urinal

URNLST Urinal Stall

URNLTR Trough Type Urinal

URNLWH Wall Hung Urinal

URWM Wall Mounted

WALLID Wall Type Identifier

WCELWH Electric Wall Hung Water Cooler

WCFM Floor Mounted

WCFVFO FV Flr Outlet Watercloset

WCFVWH FV WH Watercloset

WCINTTNK Integral Tank

WCITNK Integral Tank Watercloset

WCTANK Tank Type Watercloset

WCTNKFM Tank Floor Mounted

WCTNKWM Tank Wall Mounted

WCWHTN WH Tank Watercloset

WCWM Wall Mounted



WDFLBD Wood Floor Board

WDFNOS Wood Finish on Studs

WDFRAM Continuous Wood Framing

WDSHSD Wood Shingles Siding

WFINSH Wood Finish

WINAWN Window Awning

WINBAY Projected Bay Window

WINBOW Projected Bow Window

WINBOX Projected Box Window

WINDCI Window Double Casement Inward Open

WINDCN Wind cone

WINDCO Window Double Casement Outward Open

WINDH Double Hung Window

WINFIX Fixed 1 Foot Window

WINID Window Identifier

WINJAL Jalousie Window

WINOSL Sliding Window Left Operating Sash

WINOSR Sliding Window Right Operating Sash

WINPIV Pivot Window

WINSCL Window Single Casement Left Jamb Hinge

WINSCR Window Single Casement Right Jamb Hinge

WINSH Single Hung Window

WOODHB Hardboard Wood

WSHRBP Bedpan Washer

WTRPFF Waterproofing Felt Flashing

XRAYEQ X-Ray Equipment


TELECOMMUNICATION


ACPNL Access Control Panel

BIOACC Biometric

CAMCM Ceiling Mounted

CAMRM Roof Mounted

CAMWM Wall Mounted

CRACC Card Reader

CVRTALRM Panic Alarm

EMERDUR Emergency Duress Unit

GRDROD Grounding Rod

KPACC Key Pad

MICPHN Microphone

MONCRTCM CRT - Ceiling Mounted

MONCRTCM CRT - Ceiling Mounted

MONCRTCON CRT - Console Mounted

MONCRTCON CRT - Console Mounted

MONCRTWM CRT - Wall Mounted

MONCRTWM CRT - Wall Mounted

MONLCDCM LCD - Ceiling Mounted

MONLCDCM LCD Flat Screen - Ceiling Mounted

MONLCDCON LCD - Console Mounted

MONLCDCON LCD Flat Screen - Console Mounted

MONLCDWM LCD - Wall Mounted

MONLCDWM LCD Flat Screen - Wall Mounted

PAGETEL Paging System Phone

PUBTEL Public Pay Phone

RECDC Data Communication Wall Receptacle

RECDCF Data Communication Floor Receptacle

RECTDF Telephone/Data Floor Receptacle

RECTDW Telephone/Data Wall Receptacle

RECTEF Telephone Floor Receptacle

RECTEL Telephone Wall Recep.

SPKRCM Ceiling Mounted

SPKRWM Wall Mounted



TBOOTH Telephone Booth

CIVIL


AIRFLD Airfield Symbol

ARRPT Parking Turn Arrow

ARRSD Straight Direction Arrow

ARRST Straight and Turn Arrow

BREAK Break Line Symbol

BUOY Buoy

CATBSN Catch Basin

CATBSR Round Catch Basin

CDHDR Core Drill Hole Drilled

CDHUDR Core Drill Hole Undrilled

CLNOUT Cleanout

CNR90 Corner Solid 90

CNRSF Corner Solid Flat

CNTLIN Centerline Symbol

COGRAV Center of Gravity

CULVEE Culvert End

DBLARR Dble Arrow Terminator

DRLHOL Drill Hole

ECRD Rock Dam Sediment Trap

ERSBD Staw Bale Dam

ERSCTD Sediment Ctrl Temp Div

ERSF Silt Fence

ERSFRO Silt Fence Rock Overflow

ERSOST Stone Outlet Sed Trap

ERTGCE Construction Entr Exit

FLARRL Flow Arrow Left in 0 Pt.

FLARRR Flow Arrow Right in 0 Pt.

FOMETR Fuel Oil Meter



FOMHOL Fuel Oil Manhole

FOVALT Fuel Oil Vault

GREASE Grease Trap

GRITCH Grit Chamber

GSMETR Gas Meter

GSPLNT Gas Plant

GSRECR Gas Receiver

GSTRAP Gas Trap

GSVALT Gas Valve Vault

HEADWL Headwall

HNDCAP Handicap Chair Symbol

HORCPT Horizontal Control Point

HOVCPT Horiz. Vert. Control Point

HUREYE Hurricane Eye

HYDRNT Hydrant

INSHWY Interstate Hwy Symbol

IWMETR Industrial Waste Water Meter

IWMHOL Industrial Waste Water Manhole

JNBX Junction Box

MONWEL Monitoring Well

PHOCPT Photo Control Point

PIINFO PI Information

PIVALV Post Indicator Valve

PMPSTA Pump Station

RGVALV Regulator Valve

RRSIGN Rail Signal

RRSWTC Rail Switch

SCNRH Section Corner Hatched

SCNRO Section Corner Open

SDMHOL Storm Drainage Manhole

SHRUBC Shrub, Coniferous

SHRUBD Shrub, Deciduous

SIGN Sign

SNMHOL Sanitary Manhole

SNPVSL Sanitary Pressure Vessel



SNVALT Sanitary Valve Vault

SPOTEL Ground Spot Elevation

SPTANK Septic Tank

STHWY State Highway Symbol

STMPIT Steam Pit

SWAMP Swamp

TIDEG Tide Gage

TIRETR Tire Treddle

TNKBG Tank, Below Ground

TNKHAG Tank, Horizontal Above Ground

TNKVAG Tank, Vertical Above Ground

TRACR Traffic Arm w/Card Reader

TRAMS Traffic Arm,Mechanical Swing

TREEC Tree, Coniferous

TREED Tree, Deciduous

TREEG Tree, Generic

USHWY US Highway Symbol

VCDATA Vertical Curve Data

VERCPT Vertical Control Point

WAHHOL Water Handhole

WAMETR Water Meter

WAPLNT Water Plant

WASOFT Water Softener

WAVALT Water Valve Vault

ELECTRICAL


1DIR Direction Arrow

2DIR Double Direction Arrow

2WAYMC 2-Way Radio Mic.

ACCBIO Biometric Access Control

ACLLEL Elevated Approach Lightbar

ACLLSF Semiflush Approach Lightbar



AEDDEV Automatic Electronic Defibrillator (A.E.D.)

AERROD Aerial Rod

AFBCN Airfield Beacon

ANNUN Annunciator

ANNUNT Local Control Annunciation Unit

ARREST Lightning Arrestor

AUDIO Audio

AUTOTRSW Electric Automatic Transfer Switch

BARMKR Barrier Marker

BATTRY Battery

BEAM Bi-Static Beam Sensor

BELL Bell

BIORDR Biometrics Access Ctrl.

BUTTON Button

BUZZER Buzzer

CAMFXD Camera

CAMPTZ Camera w/P/T/Zoom

CAPCTR Capacitor

CARDRD Card Reader

CBDOUT Drawout Circuit Breaker

CBMCAS Molded Case Circuit Breaker

CELLTX Cellular Transmitter

CHIME Chime

CKTID Circuit ID Symbol

CLOCKW Clock Outlet, Wall Mounted

CMHLN New Communication Manhole

CMHLX Existing Communication Manhole

CMPANL Communication Panel

CPLTM Circuit Line Terminator

CPREC2 Cathodic Protection Rectifier

CPSAN Cathodic Protection Sacrificial Anode

CPTEST Cathodic Protection Test Station

CPU Central Processing Unit

CRDRDR Card Access Reader

CTRLPL Control Panel



DBID Ductbank ID Symbol

DGUYN New Downguy

DGUYR To Be Removed Downguy

DOROPN Electric Door Opener

DORREV Revolving Door

DSTMKR Runway Distance Marker

DTHL Displaced Threshold Light

DXFMR Dry Type Transformer

EHHLN New Electrical Handhole

EHHLX Exist. Electrical Handhole

ELBP1BCM Single Bulb - Ceiling Mounted

ELBP1BWM Single Bulb - Wall Mounted

ELBP1L 1 Lamp Emergency Light

ELBP2BCM Two Bulb - Ceiling Mounted

ELBP2BWM Two Bulb - Wall Mounted


ELBP3BCM Three Bulb - Ceiling Mounted

ELBP3BWM Three Bulb - Wall Mounted


ELLOCK Electronic Lock

EMHLN New Electrical Manhole

EMHLX Exist. Electrical Mahole

EPBXN New Electrical Pullbox

EPBXX Exist. Electrical Pullbox

ERECPT Emergency Receptacle

EXITCM Ceiling Mounted

EXITCM Ceiling Mtd. Exit Light

EXITDV Exit Device

EXITLF Exit Sign, Lighted Face

EXITWM Wall Mounted

EXITWM Wall Mounted Exit Sign Light

FAN Ceiling Fan

FIBMOD Fiber Optic Module

FIXSPB Surface Pendant Battery Fixture

FIXSPQ Surface Pendant Battery Quartz Restrike



FIXSPR Surface Pendant Battery Receptacle

FIXWM Wall Mounted Fixture

FIXWMB Wall Mounted Battery Fixture

FL14WB 1 X 4 Wall Mounted Fixture w/Battery

FL14WM 1 X 4 Wall Mounted Fixture

FL1X4 1 X 4 Light Fixture

FL1X4B 1 X 4 Light Fixture w/Battery

FL1X4C 1 X 4 Light Fixture, Continuous







FLDPNL Field Panel

FLTN New Floodlight

FLTR To Be Removed Floodlight

FLTX Existing Floodlight

FUELSOSW Fuel Shutoff Switch

FUSRAT Fuse with Rating

GENRTR Electric Generator

GENRTR Generator

GLASBR Glass Breakage Sensor

GRDROD Grounding Rod

GROUND Earth Ground

HAS1H 1 Hot Leg

HAS1N 1 Neutral Leg

HAS1S 1 Switch Leg

HAS2H 2 Hot Legs

HAS2S 2 Switch Legs

HAS3HN 3 Hot, 1 Neutral Leg

HAS3MK Hot/Neutral/Ground

HAS3S 3 Switch Legs

HAS4MK 2 Hot/Neutral/Ground

HAS5MK 3 Hot/Neutral/Ground



HASGND 1 Ground Leg

HEDASW Aerial Service Weather Head

HLL Hoverlane

HLLL Hoverlane Limit Light

HPIL Helipad Inset Light

HPPLEL Elevated Helipad Perimeter Light

HPPLSF Semiflush Helipad Perimeter Light

HRUN1 Home Run

HRUN2 Home Run

HRUN3 Home Run

INTCOM Intercom

JNBX Junction Box

JNBXWM Wall Mtd. Junction Box

KEYBRD Keyboard

KEYPAD Keypad Device

KNR Keyed Note Reference

KNRM Keyed Note Reference

LEADER Leader Line

LTPLN New Light Pole

LTPLR To Be Removed Light Pole

LTPLX Existing Light Pole

MCCTR Distribution Motor Control Center

MCPDP Power Distribution Panel

METREL Electrical Meter

MICROW Outdoor Microwave

MONITR Monitor

MOTDTRCM Ceiling Mounted

MOTDTRWM Wall Mounted

MOTION Motion Detector

MOTRHP Motor HP

OBSTRL Obstruction Light

PAPI PAPI Light Unit

PBFMC Flush Mounted Panelboard Cabinet

PBFMC Recessed Mount

PBSMC Surface Mount



PBSMC Surface Mounted Panelboard/Cabinet

PHOTO Photoelectric Relay

POLEAR Aerial Pole w/Guying

POLEID Pole Ident. Symbol

PRINTR Printer

PSHST1 One Pushbutton Station

PSHST2 Two Pushbutton Station

PSHST3 Three Pushbutton Station

PWRDVC Power System Device

PWRSPY Power Supply

RCNC Normally Closed Relay Contact

RCNO Normally Open Relay Contact

RDRKPD Card Reader w/Keypad

RECDER Recorder

RECDFM Floor Outlet, Double Flush Mounted

RECDSM Double Surf Mount Floor Outlet

RECDUP Duplex Receptacle

RECLOS Recloser Aerial Automatic

RECPT2 Special Receptacle

RECQUA Quadraplex Receptacle

RECRAN Receptacle Range

RECSDP Switched Duplex Receptacle

RECSFM Floor Outlet, Single Flush Mounted

RECSIN Single Receptacle

RECSNS Single Receptacle with Switch

RECSPR Special Purpose Receptacle

RECSSM Single Surf Mount Floor Outlet

REIL Reil Light Unit

RELAY Relay

RELYOP Relay OP Coil

RESHTR Elec. Resistance Heater

RWCLL Runway Center Light

RWEL Runway End Light

RWLEL Elevated Runway Edge Light

RWLSF Semiflush Runway Edge Light



S3ABC 3 Three Way Switches

SABC 3 Single Switches

SCRDEV Screening Device

SECSA Security Screen w/Alarm

SECSW Security Window Screen

SECTAA Sectionalizer Aerial Auto

SENGV Generic Volumetric Sensor

SENULS Ultrasonic Sensor

SES Service Entrance Section (SES)

SFL Sequenced Flasher Light

SHREDR Document Destroyer

SLLN New Streetlight

SLLR To Be Removed Streetlight

SLLX Existing Streetlight

SLREG Constant Current Transformer

SM Motor Switch

SOUNDS Sound System

STP14 1 X 4 Strip, Surface Pendant Recessed

STP14B 1 X 4 Strip, Surface Pendant Recessed w/Battery

STP18 1 X 8 Strip, Surface Pendant Recessed

STP18B 1 X 8 Strip, Surface Pendant Recessed w/Battery

SUBSTA Substation

SWFLNC Normally Closed Float Switch

SWFLNO Normally Open Float Switch

SWFNC Normally Closed Flow Switch

SWFNO Normally Open Flow Switch

SWFONC Normally Closed Foot-Operated Switch

SWI2WY Double Pole Switch

SWI3WY Three Way Switch

SWI4WY Four Way Switch

SWICB Circuit Breaker

SWICHA Auto. Monitor. Switch

SWICHM Man. Operated Switch

SWIDIS Disconnect Switch

SWIDM1 Dimmer



SWIDM2 Dimmer Switch

SWIDUR Duress Switch

SWIFUS Fused Switch

SWIKEY Key-Operated Switch

SWILVM Low Voltage Master Switch

SWITCH Single Pole Switch

SWITIM Timer Operated Switch

SWLAMP Lamp Holder Pole Switch

SWLNC Normally Closed Limit Switch

SWLNO Normally Open Limit Switch

SWMULT Multiposition Switch

SWPADN New Switchpad

SWPADX Existing Switchpad

SWPCM Ceiling Mounted Pull Switch

SWPCOI Pressure Switch-Close on Increase

SWPOOI Pressure Switch-Open on Increase

SWSBRK Single Break Switch

SWTANC Normally Closed Temp Activated Switch

SWTANO Normally Open Temp Activated Switch

SWTDNC Normally Closed Time Delay Switch

SWTDNO Normally Open Time Delay Switch

TARDR Card Reader w/Time/Att.

TDZL Touchdown Zone Light

TELEDL Telephone Dialer

THINGE Power Transfer Hinge

THL Threshold Light

TOWER Transmission Tower

Transmit Unit

TRFARM Traffic Arm.

TRFCLP Vehicle Loop Detector

TRFSIG Traffic Signal Mast Arm.

TRNSTL Turnstile

TSCTRL Traffic Signal Controller

TSHEAD Traffic Signal Head

TSPBX Traffic Signal Pullbox



TSPHS Traffic Signal Phase #, Thru.

TSPHT Traffic Signal Phase #, Turn.

TSTAT Thermostat

TSVLDT Traffic Signal Vehicle Loop Detector

TVOUT Television Outlet

TWCLL Taxiway Centerline Light

TWELEL Elevated Taxiway End Light

TWELSF Semiflush Taxiway End Light

TWGSGN Taxiway Guidance Sign

TWLEL Elevated Taxiway Edge Light

TWLSF Semiflush Taxiway Edge Light

UTPLN New Pole

UTPLR To Be Removed Pole

UTPLX Existing Pole

VIDCR Camera w/Card Reader

VIDCTL Video Control Keyboard

VIDIC Video Intercom

VIDICM Video Intercom Master

VIDKPD Camera w/Keypad

VIDMTN Video Motion Detector

VIDMUX Video Multiplexer

WINDCN Windcone

WYECON XFMR Wye Connection

WYEXGC XFMR Grounded Connection

XFRPLN New XFMR Pole

XFRPLR To Be Removed XFMR Pole

XFRPLX Existing XFMR Pole

XFRPMN New XFMR Pad

XFRPMR To Be Removed XFMR Pad

XFRPMX Existing XFMR Pad

XMFRELEV Transformer - Elevated

XMFRPFM Transformer - Floor/Pad Mounted

XMFRVT Transformer – Vault


FIRE PROTECTION


1DIR Direction` Arrow

ABCEXT ABC Type - Dry Chemical

ABORT Abort Switch

ACCESS Fire Department Access

AGSTCN Agent Storage Container

AIRCOMPR Air Compressor

ALMCOMBCM Ceiling Mounted Audible with Integral Strobe

ALMCOMBWM Wall Mounted Audible with Integral Strobe

AUDALMCM Ceiling Mounted Audible Alarm

AUDALMWM Wall Mounted Audible Alarm

BCEXT BC Type - Dry Chemical

BELLFA Bell (Gong)

BOILER Boiler

CAEXT Clean Agent or Halon

CHIMNY Chimney

CO2AA CO2 Automatically Actuated Extinguishing System

CO2EXT Carbon Dioxide

CO2MA CO2 Manually Actuated Extinguishing System

CODTR Carbon Monoxide Detector - Wall Mount

CONSFS Freestanding Siamese Fire Department Connection

CONSIA Siamese Fire Department Connection

CONSNG Single Fire Department Connection

CPESR Elevator Status/Recall

CPFAC Fire Alarm Communicator

CPFCP Fire Alarm Control Panel

CPFSA Fire System Annunciator

CPFTR Fire Alarm Transponder or Transmitter

CPHCP Halon Control Panel

CPHVA Control Panel for HVAC

DCATAA All-Type Fire Extinguisher, Automatically Actuated

DCATMA All-Type Fire Extinguisher, Manually Actuated

DCEABC Dry Chemical Extinguisher (ABC-Type)



DCEBC Dry Chemical Extinguisher (BC-Type)

DCECO2 CO2 Extinguisher

DCEHLN Halon or Clean Agent Extinguisher

DCLGAA Dry Chemical System Auto Act. (Liquid, Gas, Elec. Fires)

DCLGMA Dry Chemical System Man Act. (Liquid, Gas, Elec. Fires)

DMPBAR Barometric Damper

DMPFIR Fire Damper

DMPFS Fire/Smoke Damper

DMPSMK Smoke Damper

DRHOLD Door Holder

DRHOLD Magnetic Hold Open Device

DTFLAM Flame Detector

DTFLOW Flow Detector/Switch

DTGAS Gas Detector

DTLEVL Level Detector/Switch

DTPRES Pressure Detector/ Switch

DTTAMP Tamper Detector

ELBP1L 1-Lamp Emergency Light, Battery Powered



EPSTA Emergency Phone Station

ESCAPE Fire Escape

EXFOAM Foam Extinguisher

EXITCM Ceiling Mounted Exit Sign Light

EXITLF Exit Sign, Lighted Face

EXITWM Wall Mounted Exit Sign Light

EXWATR Water Extinguisher

FADA Distributive Amplifier

FANDCT Duct Fan

FANGEN General Fan

FANWAL Wall Fan

FAPB Strobe Power Booster

FAPNL Fire Alarm Panel

FDOR3 3-Hour Rated Fire Door in Wall

FDORL3 Wall w/<3-Hour Rated Door



FIREPUMP Fire Pump

FOAMEXT Foam

FPDRIV Fire Pump w/Drives

FPFREE Free Standing Test Header

FPTEST Wall-Mtd. Test Header

FRR1HR 1-Hour Fire Resistance Rating


FRR30M 30 Minute Fire Resistance Rating


FRR45M 45 Minute Fire Resistance Rating


FULLSS Fully Sprinklered Space

HD Heat Detector

HLNAA Automatically Actuated Halon Extinguishing System

HLNMA Manually Actuated Halon Extinguishing System

HOSECBTPED Pedestal Mounted

HOSECBTREC Wall Mounted - Recessed

HOSECBTSUR Wall Mounted - Surface

HOSECS Hose Station, Charged Standpipe

HOSEDS Hose Station, Dry Standpipe

HRN1A Horn w/Light, One Assembly

HRNMIN Mini Horn

HRNSA Horn w/Light, Separate Assembly

HRNSPK Speaker/Horn (Electric Horn)

HTDTR Heat Detector - Ceiling Mounted

HYDPR1 Private Hydrant, One-Hose Outlet

HYDPR2 Private Housed Hydrant,Two-Hose Outlets

HYDPU2 Public Hydrant, Two-Hose Outlets

HYDPUP Public Hydrant, Two-Hose Outlets, Pumper Connection

HYDW2H Wall Hydrant, Two-Hose Outlets

LITFAS Light

MANSTA Fire Alarm - Pull Station

MANSTA Manual Station

METRFP Meter

MNCHRG Monitor Nozzle, Charged



MNDRY Monitor Nozzle, Dry

NONSS Non-Sprinklered Space

PARTSS Partially Sprinklered Space

PURGE Manual Purge Control

RISER Riser

RSCO2 CO2 Reel Station

RSDRYC Dry Chemical Reel Station

RSFOAM Foam Reel Station

SD –Smoke Detector

SDTRCM Smoke Detector - Ceiling Mounted

SDTRDM Smoke Detector - Duct Mounted

SDTRWM SMOKE DETECTOR - Wall MOUNTED

SDUCT Smoke Detector for Duct

SHGARD Sprinkler Head w/Guard

SHNUU Nippled Up Upright Sprinkler Head

SHOUT Outside Sprinkler Head

SHPEND Pendent Sprinkler Head

SHPNDN Pendent Sprinkler Head, on Drop Nipple

SHSIDE Sidewall Sprinkler Head

SHUPRT Upright Sprinkler Head

SMKBAR Smoke Barrier

SSNOZZ Special Spray Nozzle

STRBCM Ceiling Mounted Strobe

STRBWM Wall Mounted Strobe

THRUST Thrust Block




VLVCHA Alarm Check Valve

VLVCHK Check Valve

VLVDEL Deluge Valve

VLVDRY Dry Pipe Valve

VLVIBF Indicating Butterfly Valve

VLVKEY Key-Operated Valve

VLVNON Nonindicating Valve (Nonrising Stem)



VLVOSY OS&Y Valve

VLVPI Post Indicator Valve

VLVPIT Valve in Pit

VLVPRE Preaction Valve

VLVQOD Dry Pipe Valve, w/Quick Opening Device

VLVTDS Valve w/ Tamper Detector/Switch

VNTOPN Ventilation Openings

WALARM Water Motor Alarm

WATRSS Water Spray System

WBDSMA Water-Based Dry System Manually Actuated

WBDSSA Water-Based Dry System Automatically Actuated

WBFSAA Water-Based Foam System Automatically Actuated

WBFSMA Water-Based Foam System Manually Actuated

WBWSAA Water-Based Wet System, Automatically Actuated

WBWSMA Water-Based Wet System, Manually Actuated

GENERAL




COLLIN Column Line/Grid Indicator

DBLARR Double Arrow Terminator

DTLIND Detail Indicator

KEYIND Keynote Indicator

MAGNOR Magnetic North Arrow

MATIND Match Line Indicator

NORIND North Indicator

NORNCS North Indicator (NCS)

NORTH1 North Indicator

NORTH2 North Indicator

NOTIND Note Indicator

REVID1 Revision Indicator, 1 Char



REVID2 Revision Indicator, 2 Char

S00001 Scale 1 : 1

S00005 Scale 1 : 5

S0000B Scale 1” = 1”

S00010 Scale 1 : 10

S0001B Scale 1” = 1’-0”

S0001G Scale 1” = 1’-0”

S00020 Scale 1 : 20

S0003B Scale 3” = 1’-0”

S0003G Scale 3” = 1’-0”

S00050 Scale 1 : 50

S0005B Scale 1” = 5’

S0005G Scale 1” = 5’

S0006B Scale 6” = 1’-0”

S0006G Scale 6” = 1’-0”

S00100 Scale 1 : 100

S0010B Scale 1” = 10’

S0010G Scale 1” = 10’

S0012B Scale 1/2” = 1’-0”

S0012G Scale 1/2” = 1’-0”

S0014B Scale 1/4” = 1’-0”

S0014G Scale 1/4” = 1’-0”

S0015B Scale 1-1/2” = 1’-0”

S0015G Scale 1-1/2” = 1’-0”

S0016B Scale 1/16” = 1’-0”

S0016G Scale 1/16” = 1’-0”

S0018B Scale 1/8” = 1’-0”

S0018G Scale 1/8” = 1’-0”

S001KB Scale 1:1000

S00200 Scale 1 : 200

S0020B Scale 1” = 20’

S0020G Scale 1” = 20’

S002KB Scale 1:2000

S0030B Scale 1” = 30’

S0030G Scale 1” = 30’



S0034B Scale 3/4” = 1’-0”

S0034G Scale 3/4” = 1’-0”

S0040B Scale 1” = 40’

S0040G Scale 1” = 40’

S00500 Scale 1 : 500

S0050B Scale 1” = 50’

S0050G Scale 1” = 50’

S005KB Scale 1:5000

S0060B Scale 1” = 60’

S0060G Scale 1” = 60’

S0080B Scale 1” = 80’

S0080G Scale 1” = 80’

S01000 Scale 1 : 1000

S0100B Scale 1” = 100’

S0100G Scale 1” = 100’

S010KB Scale 1 : 10000

S0150B Scale 1” = 15’

S0150G Scale 1” = 15’

S02000 Scale 1 : 2000

S0200B Scale 1” = 200’

S0200G Scale 1” = 200’

S0300B Scale 1” = 300’

S0300G Scale 1” = 300’

S0364B Scale 3/64” = 1’-0”

S0364G Scale 3/64” = 1’-0”

S0400B Scale 1” = 400’

S0400G Scale 1” = 400’

S05000 Scale 1 : 5000

S0500B Scale 1” = 500’

S0500G Scale 1” = 500’

S06000 Scale 1 : 6000

S0600B Scale 1” = 600’

S0600G Scale 1” = 600’

S10000 Scale 1 : 10000

S1000B Scale 1” = 1000’



S1000G Scale 1” = 1000’

S10K0B Scale 1” = 10000’

S10K0G Scale 1” = 10000’

S125KB Scale 1 : 125000

S20000 Scale 1 : 20000

S2000B Scale 1” = 2000’

S2000G Scale 1” = 2000’

S4000B Scale 1” = 4000’

S4000G Scale 1” = 4000’

SECIN1 Section Indicator



GEOTECHNICAL


ANCHOL Angle Cored Hole (Arrow=Dir)

ANTICL Anticline

BHHNUM Backhoe Hole Number

BOLOGR Boring Log Refusal

BORLOG Boring Log Sheet

CCHNUM Concrete Core Hole Number

CDRDSH Consolidated-Drained Direct Shear

CONDRA Consolidated Drained

CONSOL Consolidation

CONTST Consolidation Test

CONUDR Consolidated Undrained

CPNHOL Cone Penetrometer Hole

CUDRTT Consolidated-Undrained Triaxial Test

DSCHIC Boring w/Inclinometer

DSCHOL Drive Sampled (SPT) and Cored

DSCHPT Drive Sampled (SPT) and Cored Hyd. Pressure Tested

DSCHPZ Drive Sampled (SPT) and Cored w/Piezometer



DSCPZT Drive Sampled (SPT) and Cored Hyd Test Piezometer

DSHOL Drive Sample (SPT) Hole

DSHPZ Disturbed Sample Boring w/Piezometer

FBLCK1 Fault Block Movement 1

FBLCK2 Fault Block Movement 2

FDRAIN Foundation Drain

HAHNUM Hand Auger Hole Number

HANGF1 High Angle Fault 1

HANGF2 High Angle Fault 2

HDHNUM Hand Dug Hole Number

HEXAGN Hexagon Symbol

HOLNUM Hole Number, Elevation, Offset

HRZBED Horizontal Beds

ICCSNG Inclinometer Casing

MOISTC Moisture Content

NSAHOL Nonsampled Area of Hole

OBSHOL Piezometer or Observation Hole

OPBLOG Open Boring Log

PAHNUM Power Auger Hole Number

PIEZOM Piezometer

PROPEX Proposed Exploration

PTHNUM Perc Test Hole Number

PZABD Abandoned Piezometer

PZUNIT Piezometer Sensing Unit

RDHNUM Rotary Drill Hole Number

RFWELL Relief Well

RSLASH Refusal Slashes

SAMPLE Sample

SDIJNT Strike Dip of Inclined Joint

SQUARE Square Symbol

STKLNG Sticklog Legend

STKLOG Sticklog

STRKDP Strike Dip

STRKVJ Strike of Vertical Joint

STRKVP Strike w/Vertical Dip



SYNCLN Syncline

TPIOB Test Pit in Overburden

TRIANG Triangle Symbol

TSTHOL Test Hole Symbol

TTIOB Test Trench in Overburden

UCELL Uplift Cell

UCONUD Unconsolidated Undrained

UCONUT Unconsolidated-Undrained Triaxial Test

UDENIS Undisturbed Denison or Push

UDUNPZ Undisturbed Sample Boring Piezometer

ULIMIT Unsatisfactory Limit

VCHHPT Vertical Core Hole Hyd. Pressure Tested

VCHOL Vertical Core Hole

VHNUM Vibracore Hole Number

WASHBR Washbored

WBHNUM Wash Boring Hole Number

WLEVDL Water Level Date Left

WTRLEV Water Level

HAZARDOUS MATERIALS


AIRQST Air Quality Monitoring Station

AIRSMP Air Sample Location

BIOSMP Biological Sample Location

EGDECN Equip. Decontamination

EGONST Onsite Command Post

EGSITE Site Information Center

EGWASH Washdown Water Tank

EHZMSA Hazmat Storage Location

EHZMSB Hazmat Storage Building

EHZMSR Hazmat Storage Room

EHZMSV Hazmat Storage Vault

EHZWSA Hazwaste Storage Location



EHZWSB Hazwaste Storage Building

EHZWSR Hazwaste Storage Room

EHZWSV Hazwaste Storage Vault

EMGSHW Emergency Shower

EPOLLS Pollution Source Site

EYEWAS Emergency Eyewash

GWTQST Groundwater Quality Monitoring Station

LANGAS Landfill Gas Monitor Probe

MAGLOC Magnetometer Det. Locat

MATSMP Solid Material Sample Location

PRLLOC Potential Release Location

RESTR Restricted Access

SEDSMP Sediment Sample Location

SOLGAS Soil Gas Monitoring Probe

SOLSMP Soil Sample Location

SPLRES Spill Response

SPLTNK Spill Containment Tank

SURSMP Surface Water Sample LocD

SWTQST Surface Water Quality Monitoring Station

WASSMP Waste Sample Location

WATSMP Groundwater Sample LocD

INTERIORS


ABLLBD Bulletin Board

ACOSTM Costumer

ACURTN Curtain

ADDCAB Double Door Cabinet

AEAS30 Easel, 30W (Hidden)

AMAG15 Magazine Rack, 15W X 3D

AMAGLT Magnifying Light

APLANT Artificial Plant



APRJSC Projection Screen, Ceiling-Mounted

ASTCAB Storage Cabinet

D65CLR Desk 65 Comp LR

D65CRR Desk 65 Comp RR

D7230L L.H. Single Pedestal Desk, 72W X 30D (2)

D7230R R.H. Single Pedestal Desk, 72W X 30D (2)

DPFF Desk, Double File Pedestal

DPFL Desk, Left Pedestal

DPFR Desk Return Pedestal File

DSC1 Desk, Study Carrel, Single

ECGAME Freestanding Computer Game

ECOMCN Comsec Container

EDRYER Dryer

EPINBL Pinball Machine

EREFRG Refrigerator

ETV Television

EVEND Vending Machine

EWASHM Washing Machine

F4DL Lateral File Cab-4 Drawer

FC3618 Storage Cabinet, 36W X 18D

FE7422 Equip. Shelving, 74W X 22D, Barracks

FV1833 Vertical File, 18W X 33D

GHNDCP Universal Handicap Symbol

GIDIR Directory

GIID Identification Sign

GIIS1 Identification Sign w/1 Slot

GIIS2 Identification Sign w/2 Slots

GIPIC1 Pictogram 1

GIPIC2 Pictogram 2

GMAN Man Symbol for Restroom Signage

GWOMAN Woman Symbol for Restroom Signage

MFMATL Furniture Material List

MFSCHD Furniture Schedule

MFSYMB Furniture Symbol

MNORTH North Arrow



MRSCHD Room Finish Schedule

MSSCHD Signage Schedule

SDMGT Management Chair w/Arms 24W X 22D

SDSEC Secretarial Chair w/out Arms, 23W X 22D

SDTASK Task Chair

SGANG Gang Seating w/Table

SSOF37 Sofa Chair, 37W X 34D

SSOF63 2 Cushion Sofa, 63W X 34D

SSOF82 3 Cushion Sofa, 82.5W X 34D

STAB24 Chair Tablet Arm, 24W X 24D

T42SQ Table, 42SQ w/ Armless Chairs

TMS30 Mailsort Table 16 OH Slots 30W

TPOOL Pool Table

TROUND Round Table

W7230L Workstation L Unit LR

W7230R Workstation L Unit RR

WCPDSK Desk, Computer

WFLIPR Flipper Door Unit

WLIGHT Workstation Light

WPED Workstation Pedestal

LANDSCAPE



SHRUBD Shrub, Deciduous



TREEG Tree, Generic


MECHANICAL


ACCDOR Duct Access Door

AGUIDE Alignment Guide

AIRELM Air Eliminator

AIRIN Air In

AIRSEP Air Separator

ANCHRI Anchor

AVENTA Automatic Air Vent

AVENTM Manual Air Vent

BALLJT Ball Joint

BUSHSC Bushing

CAPSC Cap

CAPTUB Capillary Tube

CDRND Round Ceiling Diffuser

CDSQR Square Ceiling Diffuser

CFM2X3 Airflow CFM

CFM2X4 Airflow CFM

CFM3X4 Airflow CFM

CO2DTR Carbon Dioxide Detector - Wall mount

COCKSC Cock

CREDSC Concentric Reducer

CRSRSC Cross

CUPJNT Coupling Joint

DCTHTR Electric Duct Heater

DMPEOC Electric Operated Damper Control

DMPFIR Fire Damper

DMPFS Fire Smoke Damper

DMPPOD Pneumatic Damper

DMPSMK Smoke Damper

DPRSD Duct Pressure Class Down

DPRSH Duct Pressure Class Horiz

DPRSL Duct Pressure Class Left

DPRSR Duct Pressure Class Right

DPRSU Duct Pressure Class Up



DPRSV Duct Pressure Class Vert

DRIER Drier

EEQ2X2 Electrical Equipment 2X2 Mark






EL45SC 45 Degree Elbow


ELBSC Base Elbow

ELDBSC Double Branch Elbow

ELLRSC Long Radius Elbow

ELODSC Side Outlet Elbow, Outlet Down

ELOUSC Side Outlet Elbow, Outlet Up

ELSTRT Street Elbow

ELTDSC Turned Down Elbow

ELTUSC Turned Up Elbow

EREDSC Eccentric Reducer

EXPJNT Expansion Joint

FANERV Exhaust Roof Vent Fan

FANLRV Louvered Roof Vent Fan

FANSRV Intake Roof Vent Fan

FLBLND Blind Flange

FLOW2 Air Flow Direction Arrow

FLRPEN Iso. Floor Penetration

FLXCON Flexible Connector

GAUGE Gauge

GRILEX Exhaust Grille

GRILSU Supply Grille

HANGRD Hanger Rod

HANGSP Hanger Spring

HSENS Humidity Sensor

HSTAT Humidistat

LNDIFF Linear Diffuser



LOOPL Left Dimension Loop

LOOPR Right Dimension Loop

LOUOPN Door or Wall Louver Opening

O2DTR Oxygen Detector - Wall Mount

PIDROP Pitch or Pipe Drop

PIRISE Pitch or Pipe Rise

PLGBFL Bull Plug, Flanged

PLGPSC Pipe Plug

PRGGCO Pressure Gage and Cock

PSDIFF Pump Suction Diffuser

PUMP Pump

PUMPP Pump (Schematic)

PUMPS In-Line Pump

SCALET Scale Trap

SLEEVE Sleeve

STGLAS Sight Glass

STRAIN Strainer

STRBLO Blow Off Strainer

SUPOUT Supply Outlet (Wall Supply)

TDSSC Double Sweep Tee

THERM Thermometer

THERMW Thermometer Well

THHRB Thermostat, Remote Bulb

THHSC Thermostat, Self Contained (HVAC)

THLPRS Thermostat, Low Pressure

THMCP Thermostat, Microprocessor

THPELE Thermostat, Electric

THPPNE Thermostat, Pneumatic

TMPSEN Temperature Sensor

TODSC Tee, Outlet Down

TOUSC Tee, Outlet Up

TRAPFL Float Trap

TRAPFT Float and Thermostatic Trap

TRAPST Steam Trap

TRAPTB Thermostatic Blast Trap



TSODSC Tee, Side Outlet, Outlet Down

TSOUSC Tee, Side Outlet, Outlet Up

TSSSC Straight Size Tee

TSSWSC Single Sweep Tee

UNIOSC Union

UNKNDTRCM Unknown - Detector (Ceiling Mounted)

UNKNDTRDM Unknown - Detector (Duct Mounted)

UNKNDTRWM Unknown - Detector (Wall Mounted)

VA3WAM 3-Way Air Motor Controlled Valve

VA3WEM 3-Way Electric Motor Controlled Valve

VA3WM 3-Way Manual Valve

VAAHOS Angle Hose Valve

VABALL Ball Valve

VABFLY Butterfly Valve

VACWR Condenser Water Regulating Valve

VADISC Diaphragm Valve

VAEMTR Valve Actuator Electric Motor

VAESOL Valve Actuator Electric Solenoid

VAFLSC Float Valve

VAGAMC Air Motor Controlled Gate Valve

VAGLAM Air Motor Controlled Globe Valve

VAGLE Angle Globe Valve

VAGLSE Globe Valve

VAGSE Angle Gate Valve

VAGSP Angle Gate Valve

VAGTSE Gate Valve

VAHASC Hose Angle Valve

VAHGLS Hose Globe Valve

VAHGSC Hose Gate Valve

VALSSC Lock Shield Valve

VAMAGS Magnetic Stop Valve

VAMNNS Valve Actuator Manual Nonrising Stem

VAMOGS Motor Operated Gate Valve

VAMOLS Motor Operated Globe Valve

VAMOSY Valve Actuator Manual Outside Stem & Yoke



VANEED Needle Valve

VAPLUG Plug Valve

VAPMTD Valve Actuator Pneumatic Motor Diaphragm

VAPRED Pressure Reducing Valve

VAPRRD Pressure Reducing Valve

VAQOSC Quick Opening Valve

VARELF Relief or Safety Valve

VASCE Angle Globe Valve

VASCP Angle Globe Valve

VASFSC Safety Valve

VASGCH Swing Gate Check Valve

VASNAP Snap Action Valve

VASOLN Solenoid Valve

VASPCH Spring Check Valve

VASTSC Gate Valve

VASWSC Straight Way Check Valve

VATPR Temperature Pressure Relief Valve

PLUMBING


AIRCOMPR Air Compressor

BOILER Boiler

CAPSC Cap

COFM Cleanout

DRNFUN Open Drain Funnel



ELBSC Base Elbow

ELDBSC Double Branch Elbow

ELLRSC Long Radius Elbow

ELODSC Side Outlet Elbow, Outlet Down

ELOUSC Side Outlet Elbow, Outlet Up

ELSTRT Street Elbow



ELTDSC Turned Down Elbow

ELTUSC Turned Up Elbow

EWCWM Electric Water Cooler

FCO Floor Cleanout

FDCO Floor Drain with Cleanout

FDDT Floor Drain with Deep Trap

FDNT Floor Drain with No Trap

FDTP Floor Drain with Trap Prime

FDTRP Floor Drain

FDWT Floor Drain with Trap

FLBLND Blind Flange

FLOW3 Flow Arrow

FLRPEN Iso. Floor Penetration

GAUGE Gauge

GRSTRP Grease Trap

HANGRD Hanger Rod

HANGSP Hanger Spring

HTEX Heat Exchanger

ISOEWC Isometric EWC

ISOLAV Isometric Lavatories

ISOMOP Isometric Mop Sink

ISOUR1 Isometric Wall Mounted Urinals

ISOWC1 Isometric Floor Mounted Water Closet

ISOWC2 Isometric Wall Mounted Water Closet

LOOPL Left Dimension Loop

LOOPR Right Dimension Loop

PLGBFL Bull Plug, Flanged

PLGPSC Pipe Plug

PRGGCO Press. Gauge and Cock

PUMP Pump

PUMP Pump

PUMPP Pump (Schematic)

PUMPS In-Line Pump

RPBFP Backflow Preventer

SLEEVE Sleeve



STGLAS Sight Glass

STRAIN Strainer

STRBLO Blow Off Strainer

TDSSC Double Sweep Tee

THERM Thermometer

TRAPST Steam Trap

TSODSC Tee, Side Outlet, Outlet Down

TSOUSC Tee, Side Outlet, Outlet Up

TSSSC Straight Size Tee

TSSWSC Single Sweep Tee

UNIOSC Union

VA3WAM 3-Way Air Motor Controlled Valve

VA3WEM 3-Way Electric Motor Controlled Valve

VA3WM 3-Way Manual Valve

VAAHOS Angle Hose Valve

VABALL Ball Valve

VABFLY Butterfly Valve

VACWR Condenser Water Regulating Valve

VADISC Diaphragm Valve

VAEMTR Valve Actuator Electric Motor

VAESOL Valve Actuator Electric Solenoid

VAGAMC Air Motor Controlled Gate Valve

VAGLAM Air Motor Controlled Globe Valve

VAGLE Angle Globe Valve (Elevation)

VAGLSE Globe Valve

VAGSE Angle Gate Valve, (Elevation)

VAGSP Angle Gate Valve (Plan)

VAGTSE Gate Valve

VAHASC Hose Angle Valve

VAHGLS Hose Globe Valve

VAHGSC Hose Gate Valve

VALSSC Lock Shield Valve

VAMAGS Magnetic Stop Valve

VAMNNS Valve Actuator Manual Nonrising Stem

VAMOGS Motor Operated Gate Valve



VAMOLS Motor Operated Globe Valve

VAMOSY Valve Actuator Manual Outside Stem & Yoke

VANEED Needle Valve

VAPLUG Plug Valve

VAPMTD Valve Actuator Pneumatic Motor Diaphragm

VAPRED Pressure Reducing Valve

VAPRRD Pressure Reducing Valve

VAQOSC Quick Opening Valve

VARELF Relief or Safety Valve

VASCE Angle Globe Valve (Elevation)

VASCP Angle Globe Valve (Plan)

VASFSC Safety Valve

VASGCH Swing Gate Check Valve

VASNAP Snap Action Valve

VASOLN Solenoid Valve

VASPCH Spring Check Valve

VASTSC Gate Elbow

VASWSC Straight Way Check Valve

VATPR Temperature Pressure Relief Valve

VLVCHK Check Valve

WFWM Water Fountain

WTRFLTR Water Filtration Package

WTRHTR Water Heater

WTRSFR Water Softener

STRUCTURAL


4FRB 4" Flat Ribbed Waterstop

6FRBHD 6" Flat Ribbed Waterstop, Heavy Duty

6FRBLW 6" Flat Ribbed Waterstop, Light Weight

6RCBHD 6" Ribbed Waterstop with Center Bulb, Heavy Duty

6RCBLW 6" Ribbed Waterstop with Center Bulb, Light Weight

9FLBHD 9" Flat Ribbed Waterstop Heavy Duty



9FRBLW 9" Flat Ribbed Waterstop Light Weight

9RCBHD 9" Ribbed Waterstop with Center Bulb, Heavy Duty

9RCBLW 9" Ribbed Waterstop with

ANBOLT Anchor Bolt

AZLBF Foster Connection AZ LBF

AZLBM Foster Conn. AZ LBM

BOX Box Pile

CMUFL Fluted Concrete Block, 8 X 8 X 16

CMURIB Ribbed Concrete Block, 8 X 8 X 16

CMUSF Split Face Concrete Block, 8 X 8 X 16

CMUSTR Structural Concrete Block, 8 X 8 X 16


COLLIN Column Line/Grid Ind.

JSTBR1 Joist Bar, Single Line

JSTBR2 Joist Bar, Single Line

PLATE Plate Symbol

PLZ23 PLZ23 Sheet Piling

PLZ25 PLZ25 Sheet Piling

PS275 PS27.5 Sheet Pile

PS31 PS31 Sheet Pile

PSA23 PSA23 Sheet Pile

PZ22 PZ22 Sheet Pile




PZBBSM Foster Conn. HPile

PZBULL Foster Conn. Bullhead

PZCBM Foster Conn. CBM

PZJOKR Foster Conn. Joker

PZWOM Foster Conn. PZ WOM

RC230 RC230 Sheet Pile Conn

RC231 RC231 Sheet Pile Conn

SS803 Foster Superloc 1540

SS805 Foster Cap 1550 1540




SS807 Foster Cap 1560


SS809 Foster 180 90 Connector

SS810 Foster Superwale

ZB_27 Foster Angle Fab Corner

ZC270 PZ22 PZ27 L Connection




















ZT270 PZ22 PZ27 T Connection




ZX270 PZ22 PZ27 Cross Conn

ZX350 PZ35 PZ40 Cross Conn


SURVEY/MAPPING


ACLLEL Elevated Approach Lightbar

ACLLSF Semiflush Approach Lightbar

AERO Seaplane Anchorage Buoy

AFBCN Airfield Beacon

AIRFLD Airfield Symbol

ANCHR1 Anchorage Large Vessel

ANCHR2 Anchorage Large Vessel

ANCHR3 Anchorage Small Vessel



ANCHRB Anchor Berth

ARROW Arrow Terminator

BAR1 Barrel Buoy

BAR1C Barrel Buoy, Indicate Color

BAR2 Barrel Buoy

BARD Barrel Buoy, Diagonal Stripe

BARLT1 Barrel Buoy, Lighted

BARLT2 Barrel Buoy, Lighted

BARMKR Barrier Marker

BARV Barrel Buoy, Vertical Stripe

BARVT Barrel Buoy, Vertical Stripe, w/Topmark

BCN1 General Beacon

BCN2 General Beacon

BCN3 General Beacon

BCN4 General Beacon

BCN5 General Beacon

BCNBY1 Buoyant Beacon

BCNBY2 Buoyant Beacon

BCNLT1 Lighted Beacon



BCNRES Resilient Beacon

BCNTG1 Telegraphic Mooring Beacon



BCNTG2 Telegraphic Mooring Beacon

BCNTP1 Telephonic Mooring Beacon

BCNTP2 Telephonic Mooring Beacon

BCNTR1 Triangular Beacon

BCNTR2 Triangular Beacon

BM Bench Mark

BMALT Bench Mark Alternate

BNDMRK Boundary Mark


BYANCH Anchorage Buoy

BYBELB Bell Barrel Buoy

BYBELP Bell Pillar Buoy

BYCHEC Checkered Buoy

BYCOMP Compass Adjustment Buoy

BYEXPL Explosive Anchorage Buoy

BYFISH Fish Trap Buoy

BYGONB Gong Barrel Buoy

BYGONP Gong Pillar Buoy

BYJUNC Junction Buoy

BYPOS Position of Buoy

BYQUAR Quarantine Buoy

BYWAV1 Wave Actuated Bell Buoy

BYWAV2 Wave Actuated Bell Buoy

BYWHIB Whistle Barrel Buoy

BYWHIP Whistle Pillar Buoy

CABCNZ Cable Crossing Zone

CABDIS Disused Submarine Cable

CABLAN Cable Landing Beacon

CABLE Submarine Cable

CABLE1 Submarine Cable Area

CABLE2 Submarine Cable Area

CABPWR Submarine Power Area

CAIRN1 Cairn

CAIRN2 Cairn

CAIRN3 Cairn



CAIRN4 Cairn

CAN1 Can Buoy

CAN2 Can Buoy

CANWT White Can Buoy w/Topmark

CATBSN Catch Basin

CATBSR Round Catch Basin

CDHDR Core Drill Hole Drilled

CDHUDR Core Drill Hole Undrilled

CGRES1 Coast Guard Rescue Station



CKTID Circuit ID Symbol

CLNOUT Cleanout

CMHLX Existing Communication Manhole

CNR90 Corner Solid 90

CNRSF Corner Solid Flat


COAST1 Coast Guard Station




CULVEE Culvert End Symbol

DBID Ductbank ID Symbol

DBLARR Double Arrow Terminator

DGUYX Down Guy

DISPLT Disused Platform

DNGPB Lighted Danger Pillar Buoy

DNGRK Danger Underwater Rocks Depth Unknown

DNGRK1 Danger Underwater Rocks Depth Unknown

DNGSB Lighted Danger Spar Buoy

DOLPHN Dolphin

DSTMKR Runway Distance Marker

DSWTCH Distribution Switch

DTHL Displace Threshold Light

ECRD Rock Dam Sediment Trap



EHHLX Existing Electrical Handhole

EMHLX Existing Electrical Manhole

EPBXX Existing Electrical Pullbox

ERSBD Straw Bale Dam

ERSCTD Sediment Ctrl Temp Div

ERSF Silt Fence

ERSFRO Silt Fence Rock Overflow

ERSOLST Stone Outlet Sed. Trap

ERTGCE Constr. Entrance Exit

FIXPNT Fixed Point

FLARRL Flow Arrow Left in 0 Pt.

FLARRR Flow Arrow Right in 0 Pt.

FLDGAT Flood Gate

FOG Fog Signal

FOGBCN Fog Signal Beacon

FOGBY Fog Signal Buoy

FOGLS Fog Signal Light Ship

FOGLSM Fog Signal Light Ship, Manned

FOMETR Fuel Oil Meter

FOMHOL Fuel Oil Manhole

FOVALT Fuel Oil Vault

GREASE Grease Trap

GRITCH Grit Chamber

GSMETR Gas Meter

GSMHOL Gas Manhole

GSPLNT Gas Plant

GSRECR Gas Receiver

GSTRAP Gas Trap

GSVALT Gas Valve Vault

HEADWL Headwall

HLL Hoverlane Light

HLLL Hoverlane Limit Light

HORCPT Horizontal Control Point

HOVCPT Horiz. Vert. Control Point

HPIL Helipad Inset Light



HPPLEL Elevated Helipad Perimeter Light

HPPLSF Semiflush Helipad Perimeter Light

HUREYE Hurricane Eye

HYDRNT Hydrant

INSHWY Interstate Hwy. Symbol

INSTBY Oil Gas Installation Buoy

IPC Iron Pin and Cap

IWMETR Industrial Waste Water Meter

IWMHOL Industrial Waste Manhole

JETTY Jetty

JNBX Junction Box

KELP Kelp/Seaweed

LANBY1 Lanby Superbuoy Navaid

LANBY2 Lanby Superbuoy Navaid

LATBCN Lattice Beacon

LIFEBT Lifeboat Station

LIFEM1 Lifeboat at Mooring

LIFEM2 Lifeboat at Mooring

LIMIT Limit of Safety Zone

LITSV1 Floating Light

LITSV2 Floating Light

LOOKTR Lookout Watch Station

LTART Articulated Light

LTBEAC Lighted Beacon

LTBY Lighted Buoy

LTBYBB Lighted Black Barrel Buoy

LTFLD Floodlight

LTFLT Float Light

LTFLT1 Float Light IALA

LTFLT2 Float Light IALA

LTHOU1 Lighthouse

LTHOU2 Lighthouse

LTMAJ1 Major Floating Light

LTMAJ2 Major Floating Light

LTMARK Lighted Marker



LTMIN2 Minor Floating Light

LTPLT1 Lighted Platform

LTPLT2 Lighted Platform

LTPLX Existing Light Pole

LTSHP1 Lighted Vessel Lightship



LTTOW2 Lighted Beacon Tower

LTVES2 Unmanned Light Vessel

MARINA Boat Harbor Marina

MARKGD Green Day Marker

MARKRD Red Day Marker

MEAST Lighted East Marker Buoy

MNORTH North Arrow

MONWEL Monitoring Well

MORB Mooring Buoy

MORBBB Black Mooring Barrel Buoy

MORBBW White Mooring Barrel Buoy

MORBCW White Mooring Can Buoy

MORTWR Mooring Tower

MOTRHP Motor

MSOUTH Lighted South Marker Buoy

MWEST Lighted West Marker Buoy

NOTICE Notice Board

NUN1 Nun Buoy

NUN2 Nun Buoy

NUNBT Black Nun Buoy w/Topmark

NUNWT White Nun Buoy w/Topmark

OBS Obstruction

OBSSPT Observation Spot

OBSTRL Obstruction Light

ODAS ODAS Data Collection Buoy

OUTB Outfall Marking Buoy

PAPI PAPI Light Unit

PHOCPT Photo Control Point



PIINFO PI Information

PIL1 Pillar Buoy

PIL2 Pillar Buoy

PILLT Lighted Pillar Buoy

PILM Multicolored Pillar Buoy

PILOT Boarding Place

PILOT1 Pilot Office

PILOT2 Pilot Office

PILV Vertical Stripe Pillar Buoy

PILVT Vertical Stripe Pillar Buoy w/Topmark

PIPDIS Disused Pipeline Pipe

PIPE Water Sewer Outfall Intake

PIPE1 Oil Gas Pipeline

PIPE2 Oil Gas Pipeline

PIPES1 Oil Gas Pipeline Area

PIPES2 Oil Gas Pipeline Area

PIVALV Post Indicator Valve

PLAT1 Prod Platform Oil Derrick



PMPSTA Pump Station

POLE1 Pole Stake Perch

POLE3 Pole Stake Perch

POLEAR Aerial Pole w/Guying

POLEID Pole Identification Symbo

POLEP Port Hand Stake Pole

POLES Starboard Hand Stake Pole

PRIVB Private Barrel Buoy

RADAR Radar Station or Beacon

RADAR1 Floating Radar Beacon




RADIO General Radio Beacon

RADRF1 Radar Reflector or Feature



RADRF2 Radar Reflector or Feature

RANGEX Range Extension

REEF Coral Reef, Large Icon

REEF1 Coral Reef, Small Icon

REFUG1 Refuge Beacon

REFUG2 Refuge Beacon

REIL Reil Light Unit

RESCUE Rescue Station

RESPLT Observation Research Platform

RGVALV Regulator Valve

RSTAR Range Star

RVMMOP Open River Mile Marker

RVMMSO Solid River Mile Marker

RWCLL Runway Centerline Light

RWEL Runway End Light

RWLEL Elevated Runway Edge Light

RWLSF Semiflush Runway Edge Light

SAFE1 Lighted Safe Water Mark



SCNRH Section Corner Hatched

SCNRO Section Corner Open

SCNRTO Section Corner T Open

SDM Surface Displ. Monument

SDMHOL Storm Drainage Manhole4

SECCUT Typical Section Cut

SFL Sequenced Flasher Light


SIGBRG Bridge Light Inc Traffic

SIGN Sign

SIGNWS National Weather Service Station

SIGSHO Sub Signal Connect Shore

SIGST1 General Signal Station

SIGST2 General Signal Station

SIGSTP Port Control Signal Station



SIGSUB Submarine Signal

SIRLH1 Siren at Lighthouse

SIRLH2 Siren at Lighthouse

SLARRL Slope Arrow w/ Enter Data Field

SLARRR Slope Arrow w/ Enter Data Field

SLLX Existing Street Light Luminaire

SLREG Constant Current Transformer

SNMETR Sanitary Meter

SNMHOL Sanitary Manhole

SNPVSL Sanitary Pressure Vessel

SNVALT Sanitary Valve Vault

SP Survey Pedestal

SPAR1 Spar Buoy Spindle Buoy

SPAR2 Spar Buoy Spindle Buoy

SPARB Black Spar Buoy

SPARBT Black Spar Buoy w/Topmark

SPARWT White Spar Buoy w/Topmark

SPH1 Spherical Buoy

SPH2 Spherical Buoy

SPHD Diagonal Stripe Spherical Buoy

SPHV Vertical Stripe Spherical Buoy

SPHW White Spherical Buoy

SPILE Submerged Piling

SPILE1 Submerged Piles

SPILES Submerged Piles

SPILEX Submerged Pile w/Position

SPOST Submerged Post

SPOSTX Submerged Post w/Position

SPTANK Septic Tank

SSLSTA Sanitary Sewer Lift Station

STAKE Stake Perch

STAKEX Stake w/Position

STHWY State Highway Symbol

STMPIT Steam Pit

STUMPS Submerged Stumps



SUBSTA Substation

SUPER Super Buoy

SUWEL2 Suspended Well, Depth Unknown

SUWEL3 Suspended Well, Depth Unknown

SUWELY Suspended Well, Depth Known

SWAMP Swamp

SWELB1 Submerged Well w/Buoy

SWELB2 Submerged Well w/Buoy

SWELL5 Submerged Prod Well

SWPADX Existing Switch Pad

TDZL Touchdown Zone Light

TELBBB Black Telegraphic Barrel Buoy

THL Threshold Light

TIDEG Tide Gage

TIDSTF Tide Staff

TIRETR Tire Treddle




TOW1 Beacon Tower

TOW2 Beacon Tower

TOW3 Beacon Tower

TOWB Black Beacon Tower

TOWBT1 Black Beacon Tower w/Topmark

TOWBT2 Black Beacon Tower w/Topmark

TOWER Transmission Tower

TOWW White Beacon Tower

TOWWT1 White Beacon Tower w/Topmark

TOWWT2 White Beacon Tower w/Topmark



TREEG Tree, Generic

TRFSIG Traffic Signal Mast Arm

TRIPNT Triangulation Point

TRVALT Transformer Vault



TSCTRL Traffic Signal Controller

TSHEAD Traffic Signal Head

TSPBX Traffic Signal Pullbox

TSPHS Traffic Signal Phase No., Thru

TSPHT Traffic Signal Phase No., Turn

TSVLDT Traffic Signal Vehicle Loop Detector

TWCLL Taxiway Centerline Light

TWELEL Elevated Taxiway End Light

TWELSF Semiflush Taxiway End Light

TWGSGN Taxiway Guidance Sign4

TWLEL Elevated Taxiway Edge Light

TWLSF Semiflush Taxiway Edge Light

USHWY US Highway Symbol

UTPLX Existing Pole

VCDATA Vertical Curve Data

vCNRNF Corner Not Found

VERCPT Vertical Control Point

WAHHOL Water Handhole

WAMETR Water Meter

WAPLNT Water Plant

WASOFT Water Softener

WAVALT Water Valve Vault

WEIR Weir

WELL1 Wellhead, Above Water

WELL3 Wellhead, Above Water

WINDCN Windcone

WITHYP Port Hand Withy

WITHYS Starboard Hand Withy

WRECK Wreck, Not Dangerous

WRKDNG Wreck, Danger Depth Unknown

WRKEXP Wreck, Partly Exposed

XFRPLX Existing Transformer Pole

XFRPMX Existing Transformer Pad