catálogo de metrología

283 Veterans BlvdCarlstadt, NJ 07072-2708

Call Toll Free1-800-526-9087

24 hr. Fax201-933-3801

email: [email protected]: www.Phase2Plus.com

283 Veterans BlvdCarlstadt, NJ 07072-2708

Call Toll Free1-800-526-9087

24 hr. Fax201-933-3801

email: [email protected]: www.Phase2Plus.com

For orders, returns, parts, or quotes, contact ourCustomer Service Department

• All our customer service representatives haveon-line access to prices and inventory informa-tion.

• Parts available for 99% of our products.For repairs and technical assistance contact ourService Department

• Our technical and product support depart-ment can assist you with difficult applicationproblems and offer you trouble-shooting tech-niques.

Service and QualityTHE PHASE II ADVANTAGE:Top Quality ProductsPhase II offers only top quality products. Eachnew product passes a quality control checklist. wemake sure our products live up to the high qualitystandards you have come to expect.Free Technical AssistanceOur customer service representatives can answeryour questions about our products, offer adviceand recommend the proper accessories to com-plete your requests.

It’s easy to orderCall toll-free

1-800-526-9087Monday through Friday8:30 AM - 5:30 PM (EST)24-hour fax(201) 933-3801Phase II Machine & Tools Inc.283 Veterans Blvd.Carlstadt, NJ 07072-2708Phone: (201) 933-6300e-mail: [email protected] site: www.phase2plus.comWe accept Visa, MasterCard, DiscoverPrices: F.O.B. New Jersey unless advised other-

wise. Minimum order is $35 net.Terms: Net 30 days, unless otherwise agreed

uponin writing.

New Accounts: Three (3) trade references and abank reference are required to open an account.Visa, MasterCard and Discover are accepted. Ifimmediate delivery is required, please include acheck with your order, allow for COD shipmentor charge to credit card.Claims: Must be made within 5 days after receiptof merchandise. If it is a truck shipment, makesure the damage or short shipment is noted onthe delivery receipt. Without proper notation, youaccept it at your own risk.Returns: All Phase II products must have authori-zation prior to return.If product is not acceptable for any reason includ-ing application issues and demonstrations, author-ization for return must be obtained within 10days of receipt of product. Unit must be in samenew condition it was received. Failure to do sowill result in an automatic 15% restocking fee.Returns after 30 days will not be accepted.Guarantee: Phase II unconditionally guaranteesitems purchased, against manufacturer defect.Liability: The value of the defective item(s) is thelimit of our liability. All technical information hasbeen supplied by the manufacturer for your con-venience only. We do not warrant or representthat the merchandise complies with the provisionsof any law—particularly the Walsh-Healey PublicContracts Act and the OSHA of 1970 and theregulations promulgated thereunder—unless themanufacturer so warrants. Dimensions may bechanged without notice at the discretion of themanufacturer.Orders: We ship 98% of our orders within 24hours.Phase II not responsible for typographical errors.

The Source of Quality

Call Today!800-526-9087

www.phase2plus.com

MAIN HEADQUARTERS U.S.APhase II Machine & Tool, Inc.283 Veterans BlvdCarlstadt, NJ. 07072 USATel: (201) 933-6300Fax: (201) 933-3801General E-Mail: [email protected]

BEIJING, CHINAPhase II Measuring Instruments (Beijing) Ltd.Room 1204,Bldg 13,Yong Tai Yuan,Qing He,Haidian District, Beijing 100192,ChinaTel:+86-10-82752121Fax:+86-10-82750352General E-mail: [email protected]

MEXICOPhase II de MexicoCalle A No. 4 Promer PisoCol. San Marcos AzcapotzalcoC.P 02020 MexicoTel: 011-525-5538-39771Fax: sameGeneral E-mail: [email protected]

VENEZUELAPhase II Herramientas Universales EDCM. CA.Av. Francisco Lazo Marti CCPlaza Santa Monica PB LocalSanta Monica, Caracas 1040 VenezuelaTel: 212-690-28-21Fax: 212-693-29-16E-mail: [email protected]

“The Source of Q uality”

M achine Tool A ccessoriesPrecision M easuring Tools

Cutting Tools

Shop Supplies

CALL TODAYfor your

TOOLING &MEASURING

CATALOG

Portable Hardness TestingUltrasonic Hardness Tester-MET-U1A . . . . . . . . . . .2 & 3

New! Mini Ultrasonic Hardness Testers . . . . . . . . . . . .4

Digital Hardness Tester-PHT-1800 . . . . . . . . . . . . . . . .5

New! Portable Hardness Tester w/Printer/PHT-3500 .6

New! Economy Hardness Tester PHT-1700 . . . . . . . . .7

New! PDA style Hardness Tester PHT-3000 . . . . . . . . .8

Portable Hardness Tester PHT-2500 . . . . . . . . . . . . . .9

Hardness Tester w/Printer PHT-4000 . . . . . . . . . . . .10

New! Gear Teeth Hardness Testers . . . . . . . . . . . . . .11

Accessories for Portable hardness testers . . . . . . . . . .12

Leeb Test Blocks & Impact Device Specifications . . . . . .13

Bench Top Hardness TestersRockwell Hardness Tester 900-331 . . . . . . . . . . . . . . .14

Superficial Rockwell Hardness tester 900-340 . . . . . . .15

Digital Rockwell hardness tester 900-360 . . . . . . . . . .16

TWIN Digital Hardness tester 900-370 . . . . . . . . . . .17

Digital Brinell Hardness tester 900-352 . . . . . . . . . . .18

Hardness Tester Accessories . . . . . . . . . . . . . . . . . . . .19

Specialized Hardness Testers(Coatings, Rubbers, plastics)Digital Shore Durometers PHT-950 & PHT-975 . . . . . .20

New! Digital Shore Durometers . . . . . . . . . . . . . . . .21

Coating Hardness Tester PHT-995 . . . . . . . . . . . . . . .22

Surface Roughness GaugesHand Held Surface roughness Gauge SRG-1000 . . . . .23

New! Portable Surface Roughness Gauge SRG-4000 .24

Ultrasonic Wall Thickness GaugesUltrasonic Thickness Gauge UTG-1500 . . . . . . . . . . . .25

Ultrasonic Thickness Gauge UTG-2800 . . . . . . . . . . . .26

Ultrasonic Thickness Gauge w/Thru Coating UTG-2600 27

New! Ultrasonic Thickness Gauge UTG-2650 . . . . . . .28

Ultrasonic Thickness Gauge UTG-2000/2020 . . . . . . .29

Accessories for Ultrasonic Gauges . . . . . . . . . . . . . . .30

Coating Thickness GaugesIntegrated Coating Thickness GaugePTG-3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

New! Coating Thickness Gauges . . . . . . . . . . . . . . . .32

Force Gauges (Push/Pull)New! Analog Force Gauge w/Dual scale readout . . . .33

New! Digital Force Gauge w/tri scale readout . . . . . .34

Test Stand for above force gauges . . . . . . . . . . . . . . .35

Visual InspectionRigid Borescopes RGB-1000&1700 . . . . . . . . . . . . . .36

Vibration TestingVibration Meter DVM-1000 . . . . . . . . . . . . . . . . . . . .37

MEASURING METHOD: UCI — Ultrasonic Contact ImpedanceA hardness testing method based on the measurement of the frequency shift of aresonating rod caused by the essentially elastic nature of the finite area of contactbetween the indenter and the test piece during the penetration. Described as a hardnesstesting practice using a calibrated instrument by pressing a resonating rod with a Vickersstyle Diamond indentor with a fixed force against the surface of the part to be tested.

The PHASE II ultrasonic/dynamic portablehardness testers are capable of measuringthe surface hardness of a broad variety ofmetals on flat, round, thin or large surfaces.Unlike the standard Dynamic hardnesstesters, these “state-of-the-art” portablehardness testers incorporate “UltrasonicUCI” technology, which enables the hardnesstesting of very thin and small workpieces,which otherwise could not be tested accuratelyusing a portable device. Non-destructive init’s function, these hardness testers allow forthe testing of highly sensitive or finishedparts that previously could not be tested inan operational setting. The non-destructive(ndt) feature of these hardness testers allowthe operator to accurately test parts withoutcausing physical or structural damage thatwould normally lead to disposal or refinishof operators part.

FUNCTIONS: MET-U1A and MET-UDA• Perform hardness tests on variety of metals from thin to very large parts• Display test results in all various hardness scales: Scales: HRC, HRB, HRA,

HB, HV, HRN, HRT, HS, HLD• Printout to PC via USB interface w/ extended memory locations

MET-U1A Hardness Tester (MET-U1A and UDA )Standard Accessories:• Base Instrument• 10N (1kgf) Hand-Held Probe• Calibrated HRC Test Blocks• Custom Carry Case• Battery Charger• Operation ManualFunctions:• Easy To Read Menu Operation• Large LCD Display w/ Back Light• USB Interface• Automatic Conversions to: Brinell, Rockwell, Vicker and Leeb• Automatic Mean Value• Data Archive Capacity

Specifications:• Tolerance +/- 3.6% deviation of average from the

reference value of the test block with a minimum of5 tests

• Minimum Thickness of sample: .040”/1mm• Materials: steel & cast steel, alloy tool steel, stainless

steel, grey cast iron, spheroidal iron, cast aluminum,brass, bronze, wrought copper alloy.

• Battery type: NiMH Re-Chargeable (4xAA)• Operating temperature: 5-104 degrees F• Dimensions: 7.25” x 3.16” x 1.68” (HxWxD)• Weight: 1.7 lbs (UD)

Non-Destructive! • 50% Faster Test Time!

The PHASE II ultrasonic hardness testers are capable of measuring the surface hardness of a broadvariety of metals on flat, round, thin or large surfaces. Accurate measurements of steel, cast steel, alloysteel, gray cast iron, cast iron, cast aluminum alloy, brass, bronze and copper are easily attained withthis compact instrument.

MET-U1A Ultrasonic Hardness Tester

MET-UDA Combination Ultrasonic/Dynamic Hardness TesterMET-1000 Precision Test Stand

SCALES MEASUREMENT RANGE

Rockwell C 20-67 HRC

Rockwell B 59-99 HRB

Brinell 75-650 HB

Vickers 75-1000 HV

Leeb 200-900HL

HRA 20-88 HRA

HRN 20-91 HRN

HRT 12-82 HRT

HSD 23-102 HSD

TEST DEVICEU1

(UCI)D1

(DYNAMIC)

Length 160mm 140mm

Diameter 25mm 25mm

Indentation Depth 30µm 300µm

Pressure Force 14.7N 11Nm

Transducer Test Life(approx)

200,000 50,000

Min. Thicknessfor test

1mm 12mm

Min. Radius for Test 5mm 10mm

Max Roughnessof surface

Ra 2.5µm Ra 3.2µm

Max Archive 100 Tests 100 Tests

Time of Test 2 sec. 2 sec.

MET-HRC & MET-HBDesigned for quick easy hardness testing on steel in Rockwell C or Brinell scales.

The new PHASE II miniature ultrasonic hardness testers are capable of measuring the surface hardness of steel on flat, round, thin or large surfaces. Accuratemeasurements of steel, cast steel and alloy steel are easily attained with these compact instrument.

The MET-HRC & HB meets ASTM A1038-05 specifications.

MEASURING METHOD: MET-HRC & HB

“Ultrasonic Contact Impedance” is based on a 136 degree diamond at the end of a vibrating rod being depressed into the test surface at a fixed load. The dif-ference in Ultrasonic vibration frequency is then calculated into a hardness value. These units can test steel as thin as 1mm and at a hardness value as low as20HRC (81HB). They also excel at performing hardness tests on larger, harder metals as well. Another reason for the rise in popularity is due to the fact thatthe UCI method is categorized as “Non-Destructive”. That translates into less scrap parts/ lower mfg costs due to necessary inspections.

Standard Accessories:• Base Instrument• Standard AA battery• Carry Case•Operation ManualSpecifications:• Easy to read LCD Display• Immediate reading in Rockwell C scale

(MET-HRC)• Immediate readings in Brinell scale

(MET-HB)

Tolerance: +/- 3.6% deviation of averagefrom the reference value of the test blockwith a minimum of 5 testsMinimum Thickness of sample: .004”Materials: steel & cast steel, alloy toolsteel, stainless steel,Battery type: 1-AA Alkaline BatteryOperating temperature: 5-104 degrees FDimensions: 70 x 50 x 82mmWeight: 10 oz.

Non-Destructive Hardness Testing!

New! Mini-MET’s

MODEL SCALES MEASUREMENT RANGE TOLERANCE

MET-HRC Rockwell C 20-68 HRC +/- 1.5 HRC20-68 HRC

MET-HB Brinell 81-654 HB +/- 10 HB

PHT-1800State of the art, digital tester is designed to test the hardness oflarge hard metal parts. Loaded with useful functions only found onhigh priced models the PHT-1800 is clearly setting a new industrystandard by being the most accurate, economically priced hardnesstester on the market today. Fast test speeds coupled with memoryand output, this unit is a hand’s down winner whether you are outin the field or in the QC shop. The PHT-1800 can perform tests thateasily convert to the most popular hardness scales, includingRockwell, Brinell, Vickers, Shore, etc.

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and

obtain readingStandard Accessories:• Base instrument• Impact device D• Calibrated test block• Custom carry case• Cleaning brush• Operation manualOptional accessories:• Impact devices; DC, D+15, DL, G, C• Special support rings• Mini PrinterFunctions:• Easy to use keypad operation• Auto identification of Impact Device• Large LCD display with back light

• USB Ouput• Automatic conversions to:

Brinell, Rockwell B & C,Vicker and Shore

• Automatic mean value as well as Min & Maxvalues• Battery Indicator• Memory capacity (100 groups)Functions:• Accuracy: +/- 0.5% (referred to L=800,• Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool steel,

stainless steel, grey cast iron,• Spheroidal iron, cast aluminum, brass,

bronze, wrought copper alloy.• Battery type: AA alkaline (4)• Operating temperature: 5-104 degrees F• Dimensions: 150 x 74 x 32mm• Weight: 245 grams

5 Year

Warranty

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingStandard Accessories:• Base instrument• Impact device D• Calibrated test block• Custom carry case• Cleaning brush• Operation manualOptional accessories:• Impact devices; DC, D+15, DL, G, C• Special support rings

Functions:• Easy to use keypad operation• Auto identification of Impact Device• Large LCD display with back light• USB Ouput• Automatic conversions to: Brinell, Rockwell B & C,

Vicker and Shore• Automatic mean value as well as Min & Max values• Upper/Lower Limit Setting w/Alarm• Battery Indicator• Memory capacity (500 groups)Specifications:• Accuracy: +/- 0.5% (referred to L=800,• Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL

• Minimum Thickness:< 0.5” (Steel)• Materials: steel & cast steel, alloy tool steel, stainless

steel, grey cast iron,• spheroidal iron, cast aluminum, brass, bronze, wrought

copper alloy.• Battery type: 6V NiMh Rechargeable• Battery charger: 9V/500mA• Continuous working periodÅFabout 150 hours

(With backlight off, no printing)• Printing paper: width is (57.5±0.5)mm,

diameter is 30mm• Communication interfaceÅFUSB1.1• Operating temperature: 5-104 degrees F• Dimensions: 212 x 80 x 32mm• Weight: 245 grams

The PHT-3500 can perform tests thateasily convert to the most popular

hardness scales, including Rockwell,Brinell, Vickers, Shore, etc.

PHT-3500State of the art, digital tester is designed to test the hardness of large hard metal parts. Loaded with useful functions and a built in mini-printer the PHT-3500 is clearly the industry leader for fast accurate hardness testing with advanced thermal printing capabilities.

5 Year

Warranty

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingStandard Accessories:• Base instrument• Impact device D (“DL” PHT-1740)• Calibrated test block• Custom carry case• Cleaning brush• Operation manualFunctions:• Easy to use push button operation• Large LCD display with back light• Automatic conversions to: Brinell, Rockwell, Vicker and Shore• Automatic mean value• Data storage capacitySpecifications:• Accuracy: +/- 0.5% (referred to L=800,• Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool steel, stainless steel,

grey cast iron, spheroidal iron, cast aluminum, brass,bronze, wrought copper alloy.

• Battery type: AAA alkaline (2)• Operating temperature: 5-104 degrees F• Dimensions: 108 x 62 x 25mm• Weight: 230 grams

PHT-1700Loaded with features, this economically price hardness tester is capable of measuring thesurface hardness of a broad variety of metals on flat and round surfaces. This instrumentcomes complete with the universal D impact device, calibrated test block and rugged carrycase.

PHT-1740Same base instrument as the PHT-1700 but comes supplied with the “DL” impactdevice for testing of gear teeth, grooves and other confined applications. See page 11.

5 Year

Warranty

PHT-3000This state of the art PDA style portable hardness tester is loaded with everyuseful feature you will ever need for checking the hardness of metals. Withits easy to use touch screen menu, this unit can quickly and accuratelydisplay hardness values, conversions, memory and any other importantinformation needed.

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingStandard Accessories:• Base instrument• Infrared Mini-Printer• Impact device D• Calibrated test block• USB output Cable• A/C Adapter (usb)• Custom carry case• Cleaning brush• Operation manualFunctions:• Easy to use push button operation• Large LCD display with back light

• Automatic conversions to: Brinell, Rockwell C,Rockwell B

• Automatic mean value• Data storage capacity up to 800 groupsSpecifications:• Accuracy: +/- 0.5% (referred to L=800,• Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool steel,

stainless steel, grey cast iron, spheroidal iron, castaluminum, wrought copper alloy.

• Battery type: AAA alkaline (2)• Operating temperature: 5-104 degrees F• Dimensions: 5.3” x 3.2” x 1.1”• Weight: 8.2oz.

5 Year

Warranty

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingFunctions:• Easy to read menu operation• Large LCD display with

back light• RS 232 interface• Automatic conversions to: Brinell, Rockwell,

Vicker and Shore• Automatic mean value• Data storage capacity

Specifications:• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool

steel, stainless steel, greycast iron, spheroidal iron,cast aluminum, brass,bronze, wrought copperalloy.


Standard Accessories:• Base instrument• Impact device D• Calibrated test block• Custom carry case• Cleaning brush• Operation manual• Protective Wrist BandOptional Accessories:• Micro printer• Impact devices; DC, D+15, DL, G, C• Special support rings• Printer cable

5 Year

Warranty

MATERIAL HRC HRB HB HV

STEEL & CAST STEEL 20-68 60-100 93-674 83-976

COLD TOOL STEEL 20-67 80-898

STAINLESS STEEL 20-62 46-100 85-655 85-802

GREY CAST IRON 93-334

NODULAR CAST IRON 131-387

CAST ALUMINUM ALLOYS 27-159

COPPER/ZINC ALLOYS (BRASS) 13-95 40-173

CuAI/CuSn ALLOYS (BRONZE) 60-290

WRAUGHT COPPER ALLOYS 45-315

Optional accessories include a 12pc set of Support ringsto meet the requirements of testing convex

or concave applications.

PHT-2500 Portable hardness testerState of the art, digital tester is a menu driven, multi-functional unit with extended memory and RS 232 output capabilities. This unit canperform tests that easily convert to every popular hardness scale, including Rockwell, Brinell, Vickers, Shore, etc. Protective leather wrist strapincluded! Simply put, it’s the most versatile, accurate, hardness tester on the market today! PHT-2550D comes supplied with Mini-Printer, PCCable, A/C Adapter and H/D Carry Case.

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingStandard Accessories:• Base instrument• Impact device D• Calibrated test block• Heavy Duty Rubber Casing w/Carry Strap• Custom carry case• Cleaning brush• Operation manual

Optional accessories:• Impact devices; DC, D+15, DL, G, C• Special support ringsFunctions:• Easy to read menu operation• Large LCD display with back light• USB Ouput• Automatic conversions to: Brinell, Rockwell,

Vicker and Shore• Automatic mean value as well as Min & Max values• Multi-Functional Data storage capacity

Specifications:• Accuracy: +/- 0.5% (referred to L=800,• Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool steel,

stainless steel, grey cast iron, spheroidal iron, castaluminum, brass, bronze, wrought copper alloy.


FEATURES

PHT-4000 Portable Hardness TesterOur latest portable hardness tester is a direct result of our relentless pursuit to bring you the latest, State-Of-The-Art, WORLD-CLASS, portablehardness testers.

This multi-functional instrument allows not only portability, but secure fixed positioning by a convenient flip stand mounted on the rear of the casing. Physicallyrobust, the Phase II PHT-4000 is designed and engineered to perform in the most rigorous of environments, all the while providing highly sensitive and accu-rate readings.

This portable hardness tester utilizes external probes, offering greater versatility when specialized applications arise. This is a decided advantage over integrat-ed/fixed probe style portable hardness testers.

Our industry leading interface enables users to easily manipulate multiple statistical and printing features all viewed on the large LCD screen. Lightning fastresults are easily obtained in Rockwell, Brinell, Vickers, Leeb, and Shore hardness scales.

Utilizing USB output, the PHT-4000 outputs directly to your pc, all the while charging your batteries. It also can send data directly to its built-in printer for quicktear attachments to your documents or reports.

5 Year

Warranty

PHT-1740This dedicated unit is designed to test gear teeth and other difficult to access applications. The 1740 is an economically priced hardness tester that isloaded with the same features found on the base 1700 version. The 1740 hardness tester is capable of measuring the surface hardness of a broad varietyof metals on flat and round surfaces. This instrument comes complete with a dedicated DL impact device, calibrated test block and rugged carry case.

PHT-1840This dedicated unit is designed to test gear teeth and other difficult to access applications. The 1840 is loaded with the same features found on the base1800 version which includes memory, USB output and software for downloading to your PC. The 1740 hardness tester is capable of measuring thesurface hardness of a broad variety of metals on flat and round surfaces. This instrument comes complete with a dedicated DL impact device, calibratedtest block and rugged carry case.

5 Year

Warranty

PHT-1740

PHT-1840

D+15

DC

G

DL

CImpact devices for

PHT-1800/PHT-2000/PHT-2500/PHT-4000Call for Application info

“G” Impact DeviceThis device has an enlarged test tip, and anincreased impact energy range (approx. 9times the D, 72 ft-lb.). Can be used on lowerquality finishes for measuring hardness inthe Brinell range only (max. 650 HB).Designed to be used with heavy componentssuch as heavy castings and forgings.Weight: 250g.

“C” Impact DeviceA reduced energy impact device for measur-ing the hardness of Case Hardened Steelonly. Applies a small superficial indentation.Weight: 75g.

“D” Impact DeviceUniversal standard unit. Will handle themajority of hardness testing applications.Weight: 75g.

“DL” Impact DeviceThis model features a needle frontsection with a diameter of 4mm and a lengthof 50mm. It is suitable fortesting in extremely confined spaces, thebase of grooves and on specialcomponents such as as gear wheels.For use on steel and cast steel only!

“DC” Impact DeviceVery short impact device for those confined areas,i.e. inside bores for internal measurements.Conforms to the D measuring range. Weight: 50gFits PHT-2500 only.

“D+15” Impact DeviceVery narrow contact area with a set back measurementcoil. This device is used to measure hardness ingrooves and recessed surfaces. Weight: 80g.

12pc Universal Support Ring SetPHT1500-300This kit comes complete with 6-concave rings, 5 convex ringsand 1- small stand for difficult to test round or curved parts.

PHT1300-01 HLD Test Block(for use with all “D” type Impact Devices)

PHT1100G-01 HLG Test Block(for use with “G” Impact Device)

Technical Data for Impact DevicesNote: Impact device D is standard device on all models. Specification is identical.

IMPACT DEVICES D/DC/DL D+15 C GIMPACT ENERGY 11Nmm 11Nmm 3Nmm 90NmmMASS OF THE IMPACT BODY 5. 5g 7. 8g 3. 0g 20g

DL: 7.3gTEST TIP* Hardness 1600HV 1600HV 1600HV 1600HV* Diameter 3mm 3mm 3mm 5mm* Material Tungsten Tungsten

carbide carbideIMPACT DEVICE

* Diameter 20mm 20mm 20mm 30mm* Length 147/86mm 162mm 141mm 254mm* Weight 75/50g 80g 75g 250g

MAX. HARDNESS OF SAMPLE 940HV 940HV 1000HV 650HBPREPARATION OF SURFACE

* Roughness class ISO N7 N7 N5 N9* Max. roughness depth Rt 10 m m 10 m m 2.5 m m 30 m m* Average roughness Ra 2 m m 2 m m 0. 4 m m 7 m m

MIN. WEIGHT OF SAMPLE* Of compact shape 5kg 5kg 1.5kg 15kg* On solid support 2kg 2kg 0.5kg 5kg* Coupled on plate 0. 1kg 0. 1kg 0. 02kg 0. 5kg

MIN. THICKNESS OF SAMPLE* Coupled 3mm 3mm 1mm 10mm* Min. thickness of layers 0. 8mm 0. 8mm 0. 2mm -

INDENTATION OF TEST TIPWith 300 HV* Diameter 0. 54mm 0. 54mm 0. 38mm 1.03mm* Depth 24 m m 24 m m 12 m m 53 m m

With 600 HV* Diameter 0. 45mm 0. 45mm 0. 32mm 0. 90mm* Depth 17 m m 17 m m 8 m m 41 m mC

With 800 HV* Diameter 0. 35mm 0. 35mm 0. 30mm -* Depth 10 m m 10 m m 7 m m -

900-331This hardness tester comprises the very best in “state of the art”design coupled with dynamic precision only found at Phase II.The 900-331 Rockwell scale hardness tester is easy to operateyet engineered to obtain highly sensitive and accurate readings.A perfect, rugged performer suited for almost any environmentincluding heat treat facilities, tool rooms, workshops, laborato-ries and inspection labs. Lifetime technical support is includedon all Phase II Hardness Testers. So test away with confidenceand a level of accuracy you will only find at Phase II.

Accessories:• C-scale Diamond Indentor• 1/16” Ball Indentor• 3- HRC Test Blocks• 1- HRB Test Block• 1-HRA Test Block• Test Table 5.87”(150mm)• Flat Anvil 2.5” (63mm)• Flat Anvil 5.87”• Std. Vee Anvil• H/D Accessory Case• Dust Cover

Minor Load 10KgfMajor Load 60Kgf, 100Kgf, 150KgfTest Force Application Dead WeightTest Force Control Hydraulic Dashpot SystemResults Display Analog Dial GageVertical Capacity 6.7 in.Throat Depth 6.6 in.Height 30.0 in.Width 8.50 in.Depth 20.0 in.Shipping Weight 242 lbs.

5 Year

Warranty

Accessories:• Designed to test Rockwell N

and Rockwell T scales• N-scale Diamond Indentor• 1/16” Steel Ball Indentor• 2-HRN Test Blocks• 3-HRT Test Blocks• Test Table 5.87”(150mm)• Flat Anvil 2.5” (63mm)Flat Anvil 5.87”• Std. Vee Anvil• Accessory Case• Dust Cover

Features:• Motor driven system provides

control of test force application• Direct analog dial reading• Engineered to obtain highly

sensitive and accurate readings• Perfect for laboratories, workshops,

tool rooms, inspection labs, etc.• For testing thin, soft material in

the Superficial Rockwell scales(900-340)

Minor Load 10 KgfMajor Load 15 Kgf, 30 Kgf, 45 KgfTest Force Application Dead WeightTest Force Control MotorizedResults Display Analog Dial GageVertical Capacity 6.7 in.Throat Depth 6.6 in.Height 28 in.Width 8.9 in.Depth 19.6 in.Shipping Weight 240 lbs

900-340Just like our Phase II analog Rockwell Hardness Tester, the 900-340 SuperficialRockwell hardness tester comprises the very best in “state of the art” designcoupled with dynamic precision only found at Phase II. Used for testing thin andsoft material in the Superficial Rockwell hardness scales, this hardness testerutilizes a motor driven system for control of the major test force application. The900-340 is easy to operate yet engineered to obtain highly sensitive andaccurate readings. The 900-340 tester will offer unmatched repeatability in allSuperficial Rockwell hardness scales. A perfect, rugged performer suited foralmost any environment including heat treat facilities, tool rooms, workshops,laboratories and inspection labs. Lifetime technical support is included on allPhase II Hardness Testers. So test away with confidence and a level of accuracyyou will only find at Phase II.

5 YearWarranty

Features:• Easily obtain Average,

Min/Max, S, R• Menu selectable system• Upper/Lower Limit Settings• Memory of 500 test results• Curved Surface Auto Correction

Minor Load 10 Kgf

Major Load 60 kgf, 100 kgf, 150 kgf

Test Force Application Dead Weight

Test Force Control Motorized

Results Display Hi Def LCD Digital Readout

Resolution 0.1HR

Memory/Output 500 Tests/USB

Vertical Capacity 7.87”

Throat Depth 6.50”

Height 28.34”

Width 7.87”

Depth 21.60”

Accessories:• C-scale Diamond Indenter• 1/16” Ball Indenter• 2- HRC test Blocks• 1- HRB Test Block• Built-in Mini Printer• Test Table 5.87”

(150mm)• Flat Anvil 2.5” (63mm)• Std. Vee Anvil• Accessory Case• Dust Cover

900-365Fully automated load/unload procedures affords highly sensitive and accurate readings.Micro computer controlled with USB output to built-in mini printer or PC. Offersprogrammable scale conversions, dwell times, statistical capabilities and test counter.Capable of testing in all of the regular Rockwell® scales. Automatic conversions to HB,HV, HLD and σb

Comes Complete with everything needed to test in the following Rockwell Scales; A, B, C, D, F, G.Rockwell Scales E, H, K, L, M, P, R, S, V can be achieved with optional indentors!

NEW!

Accessories:• Diamond Conical Indentor• 1/16” Ball Indentor• 2- HRC Test Blocks• 1- HRB Test Block• 1- HR30N Test Block• 1- HR30T Test Block• Test Table 5.87” (150mm)• Flat Anvil 2.5” (63mm)• Std. Vee Anvil• Built-in Micro printer• RS232 Serial Port/Data Cable• Digital Test Counter• Statistics (avg, min, max, range, sd)• Accessory Case• Dust Cover

Major Load1837.5N / 2450N / 4900N7350N / 9800N / 29400N

Test Force Application Dead Weight


Results Display Digital LCD

Vertical Capacity 9.44” / 240mm

Throat Depth 5.11” / 130mm

Height 30.51” / 775mm

Width 21.65” / 550mm

Depth 9.44” / 240mm

Shipping Weight 385 lbs

Features:• Digitally computes regular

Rockwell® and Superficial scalesin one versatile tester

• Easily converts scales with thepush of a button

• Complete micro-computercontrolled operation affordshighly sensitive and accuratereadings

• Extended memory of up to9999 test results

• Conversions to: Brinel andVickers hardness scales

• Built-in mini printer• 5 – Calibrated Test Blocks

900-370The 900-370 Phase II Rockwell Hardness Twin Tester, digitally computes standardRockwell and Superficial Rockwell Hardness scales in one versatile unit. The easyto use interface converts hardness scales with a push of a button. Complete microcomputer controlled operation drives this hardness tester to highly sensitive andaccurate readings. The 900-370 will offer unmatched repeatability in all stan-dard and superficial Rockwell hardness scales. A top of the line performer suitedfor almost any environment including heat treat facilities, tool rooms, work-shops, laboratories and inspection labs. Lifetime technical support is included onall Phase II hardness testers. The 900-370 is truly a “world class” hardness testerproviding level of confidence and accuracy you will only find at Phase II

Comes Complete With Everything You Need To Perform Tests InThe Following Rockwell Scales; A, B, C, D, F, G, N & T

E, H, AND K Scales Can Be Achieved With Optional Indentors

Test Loads62.5, 100, 125, 187.5,250, 500, 750, 1000,1500, 3000 kgf

Test Force Application Load Cell


Accuracy Conforms to ASTM-E10

Results Display Digital LCD

Vertical Capacity 9.44” / 240mm

Throat Depth 5.11” / 130mm

Height 30.51” / 775mm

Width 21.65” / 550mm

Depth 9.44” / 240mm

Shipping Weight 385 lbs

Hardness Tester includes:• Large testing anvil• Small testing anvil• V testing anvil• Standard Brinell test block• Reading Microscope (20x)• Steel ball indenters (2.5mm , 5mm, 10mm)

900-352The 900-352 utilizes a Load cell for measuring the test forces, which provides ahighly efficient and low cost means of Brinell Hardness testing. Easy operationcombined with high accuracy makes the 900-352 the perfect choice for produc-tion environments or testing labs.

Model No. Description900330-9440 120° Diamond Indentor

900330-9441 1/16” Carbide Steel Indentor

900330-12 1/2” Carbide Ball Indentor



Model No. Description

900330-9405 Small Round Anvil

900330-9411 Large Round Anvil

900330-9412 V-Anvil

900331-9406 Spot Anvil 1/2” Dia.


900330-9413 A-Scale Test Block

900330-9414 B-Scale Test Block

900330-9415 C-Scale (Low Range) Test Block

900330-9416 C-Scale (Mid Range) Test Block

900330-9417 C-Scale (Hi Range) Test Block

900340-9001 HR15N Superficial Test Block



900340-9004 HR45T Superficial Test Block



Other Available Test Blocksa) Full Range of Rockwell Scale Test Blocksb) Full Range of Brinell Test Blocksc) Most Micro Hardness Test Blocks including Vickers,

and Knoop.

These testers are crafted and engineered toperform at the highest level of accuracy.An ergonomic and attractive design combinedwith lightweight assists in taking precisehardness measurements.

Test Blocks Not Included. See selection below:

PHT-950 Digital Shore A DurometerPHT-975 Digital Shore D DurometerPHT950-25 Shore A Master Test Block Kit (7pc set)PHT-975-25 Shore D Master Set(3pcs in case)

PHT-950 Shore “A” PHT-975 Shore “D”

Measurement Range 0-100HSA 0-100 HSD

Deviation <1%H <1%H

Resolution 0.1H 0.1H

Digital Readout Yes Yes

Repeatability 20-90 HSA <+/-1 H 20-90 HSD <+/-1 H

Conforms to StandardsASTM D-2240ISO 7619

ASTM D-2240ISO 7619

Peak Value Lock in DIN 53505 DIN 53505

StatisticsYesMean, Min, Max, No. ofMeasurements and Deviation

YesMean, Min, Max, No. ofMeasurements and Deviation

Power Supply 4 x AAA 4 x AAA

Low Battery Indicator Yes Yes

Model No. PHT-960 Shore A ScaleModel No. PHT-980 Shore D ScaleDesigned to test the hardness of Rubbers and Plastics

These sleek hand held hardness testers are crafted and engineered to perform at the highest level of accuracy. An ergonomic,lightweight design assists in taking precise and consistent hardness measurements.

Specifications:• Measuring range: 0-100HSA (0-100 HSD)• Deviation: <1%H• Resolution: 0 .5H• Digital read out• Auto Hold feature• Accurate and repetitive

deviation = 20~90HSA• HSA<+/-1grade• Conforms to ASTM D-2240, ISO 7619,

DIN 53505 standards• Uses 1-SR44 Button Cell Battery• Custom rugged carry case

5 Year

Warranty

Shore A scale is for testing the following materials:Rubber: Soft vulcanized (ie tyre), natural nitrile.Elastomeretric materials (rubber & rubber like): GR-S, GR-1,neopene, thiokol, flexible polyacrylic esters neoprene, thiokol, flexiblepolyacrilic esters.Other: Wax, felt, leather etc. (materials that normally yield underfingernail pressure, such as the heel on your shoe).

Shore D scale is for testing the following materials:Rubber: HardPlastics: Harder grades such as rigid thermoplastics, plexiglas,thermoploystyrene, vinyl, sheet, cellulode acetate, thermosettingLaminates (ie fornica)Other: Paper filled calendar rolls, calendar bowls, etc. (materials thatwould not normally indent under fingernail pressure, such as a pocketcomb or bowling ball).

PHT-995The Phase II Coating Hardness Tester is engineered to determine the resistance of coatings to scratch effects on the surface. Utilizing the Wolff/Wilborn princi- ple,this coating hardness tester conforms to ASTM D 3363-05.

Pencils of various known hardness are dragged over the coating surface at a fixed angle and fixed pressure. Beginning with the hardest lead, graduating softer,movements of .250” (6.5mm) will determine where the surface area is/is not being gouged or scratched.

Pencils can be changed easily via a knurled thumb screw on the side of the instrument.

A set of 14 calibrated wood drawing pencils is included from 6B to 6H.

SRG-1000The PHASE II SRG-1000 surface roughness tester is a pocket-sized economically pricedinstrument for measuring surface texture conforming to traceable standards. It can beused on the shop floor in any position, horizontal, vertical or anywhere in between.

The large LCD display shows either roughness parameter Ra or Rz at the touch of abutton, combined with the selected cutoff length. External calibration of theroughness values is possible by means of a special CAL button, which makesadjustment of this instrument very easy. A beep signal informs the user about eachindividual measurement status when ready.

The easy to use SRG-1000 operates on various surfaces, not only flat but also outercylinder, outer cone, grooves, and recesses greater than 80x 30mm. The areas ofapplication are wide spread. It is suitable for inspection departments, qualitycontrol, on the shop floor during machining, during assembly, and on site.

The SRG-1000 determines both roughnessparameters Ra and Rz within a wide measuringrange. The piezo-electric pick-up stylus withdiamond tip assures a very reliable measurementwithin tolerances that conform to ISO Standards &DIN Standards. Roughness parameter Ra iscomputed to conform to ISO Standards and Rz iscomputed to conform to DIN Standards.

Roughness parameter Ra (ISO), Rz (DIN)

Measuring range Ra: 0.05-10.0µm/Rz 0.1-50µm

Resolution 0.04µm (1.6minch)

Cut-off lengths 0.0009in., 0.03in., 0.09in

Filter RC analogue

Tracing length 0.23in (6mm)

Tracing speed 0.04in/second (1.0mm/second)

Accuracy +/- 12% of actual Value

Pick-up stylus Piezo-electric

Tracer tip Diamond, radius 10mm +- 2.5mm

Operating temperature 32-104 degrees F (0-40 degrees C)

Power 3.6v / 2xNiMh batteries

Charger 9V DC

Contact force on probe <1.8ozf (<50gf)

Static measuring forceof sensor stylus <0.06ozf (<1.6gf)

Dimensions 4.9 x 2.8 x 1.0in (125 x 73 x 26mm)

Weight 0.4lbs (200g)

SRG-4000SRG4000-050Optional Precision Test Stand

Optional Accessories:SRG4000-050 Precision Support StandSRG4000-110 Stylus ExtensionSRG4000-130 2µm Diamond StylusSRG4000-140 Stylus for GroovesSRG4000-150 Stylus for Curved Surfaces

Features:• 4 Different roughness parameters• Inside/Outside Diameters• Stylus Level Indicator

5 Year

Warranty

Roughness parameter Ra, Rz, Rq(RMS), RtAssessed Profiles Primary profile(p),

Roughness profile(R) tp curve (Mr)

Conformance Standards ISO/DIN/JIS/ANSI

Measuring System Metric µm, Imperial µinch

Display Resolution +/-20 µm = 0.001 µm+/-40 µm = 0.002 µm+/-80 µm = 0.004 µm

Display Range Ra, Rq: 0.005 µm up to 16 µmRz, Rt: 0.02 µm up to 160 µm

Pick Up Measuring Range +/- 80 µm

Sensor Specifications 5 µm Diamond Tip Stylus

Sensor Angle 90°

Contact Force 4mN (0.4gf)

Display features SStylus position sensorBattery level indicatorDirect display of parametersDirect printingAuto-off with auto store

Cut-off lengths 0.25mm/0.8mm/2.5mm

Tracing length Lt 1.3mm – 17.5mm

Digital Filter RC, PC-RC, GUASSIAN, D-P

Traverse Length Selectable 1,3 or 5

Power Li-Ion battery

Working temperature 5-40 degrees C.

Dimensions 139mm x 56mm x 48mm

Weight 450g

UTG-1500This handheld unit has precise touch and read capabilities yetis economically priced. The UTG-1500 is designed to measurethe thickness of metallic and non-metallic materials such asaluminum, titanium, plastics, ceramics, glass and any othergood ultrasonic wave conductor as long as it has parallel topand bottom surfaces. The UTG-1500 will accurately displayreadings in either inch or millimeter after a simplecalibration to a known thickness or sound velocity.

Display type 3-digit LCDResolution 0.001”/0.01mmMeasuring Range 0.04” to 8.0”Sound velocity range 3280-32805 ft/s (1000-9999m/s)Operating temperature 32-122 degrees FFrequency 5MHzUpdate range 4HzMemory N/AOutput N/APrinting N/APower supply AA alkaline batteries (4pc supplied)Battery life Approx. 250 hours/setPower consumption Working current is less than 3VDimensions 4.9” x 2.6” x 0.9” (161 x 69 x 32mm)Weight 0.7lbs (300g)

Comes complete with Certificate of Calibration, Couplant Gel,AA Batteries, Operation Manual and Custom Carry Case.

5 Year

Warranty

Display type 4-digit LCD w/Back LightMinimum display unit 0.001”/0.01mm (selectable)Measuring Range 0.02-12.0” in steel w/standard probeAccuracy +/- (0.5% thickness + .001”)Sound velocity range 3280-32805 ft/s (1000-9999m/s)Upper/Lower Limit Preset Alarm YesOperating temperature 32-122 degrees FFrequency 5MHzUpdate range 4HzMemory 20 Groups (100 files/group)Output USBMini-Printer OptionalPower supply 3v AA alkaline batteries (2pc)Battery life Approx. 100 hours (w/backlight off)Power consumption Working current is less than 3VDimensions 5.90” x 2.91” x 1.30” (150 x 74 x 33mm)Weight 8.6oz (245g)

UTG-2800State of the art, digital tester is packed with features typically found on high end models only. This multi-functional unit offers everything frombasic measurement, Scanning Capabilities, Adjustable Sound Velocity, extended memory and USB output capabilities. This dynamic sonic gauge isdesigned to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other goodultrasonic wave conductor as long as it has parallel top and bottom surfaces.

The UTG-2800 will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.

5 Year

Warranty

UTG-2600 comes complete with Certificate of Calibration,Operation Manual and Custom Carry Case.

UTG-2600State of the art, digital tester is capable of readingwall thickness thru coatings and paint without affectingthe measurement and is packed with the most popularfeatures including basic measurement, ScanningCapabilities, Adjustable Sound Velocity, and extendedmemory. This dynamic sonic gauge is designed tomeasure the thickness of metallic and non-metallicmaterials such as steel, aluminum, titanium, plastics,ceramics, glass and any other good ultrasonic waveconductor as long as it has parallel top and bottomsurfaces. The UTG-2600 will accurately display read-ings in either inch or millimeter after a simple calibra-tion to a known thickness or sound velocity.

Display type 4-digit LCD w/Back Light

Minimum display unit0.003 (if>3.93”0.0003” (if<3.93”)

Measuring RangeStandard Mode: 0.03-8.0” in steelThru Coating Mode: 0.118” - .905” 3.0 -23mm)w/standard probe

Accuracy +/- 1%xH + 0.0007” (H=displayed value)Sound velocity range 3280-32805 ft/s (1000-9999m/s)Upper/Lower Limit Preset Alarm YesOperating temperature 32-122 degrees FFrequency 4MHzUpdate range 4HzMemory 500 Test ValuesPower supply 3v AA alkaline batteries (2pc)Battery life Approx. 100 hours (w/backlight off)Power consumption Working current is less than 3VDimensions 5.86” x 2.87” x 1.25” (149 x 73 x 32mm)Weight 5.6oz (160g)

5 Year

Warranty

UTG-2650State of the art ultrasonic technology allows you to obtain ultra precise thickness measurements and store them to memory. Thisdigital tester is capable of reading wall thickness down to 0.010” with a super high adjustable resolution of up to0.0001”. This dynamic sonic gauge is designed to measure the thickness of metallic and non-metallic materials such assteel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel topand bottom surfaces. The UTG-2650 will accurately display readings in either inch or millimeter after a simple calibration to aknown thickness or sound velocity.

Display type 4-digit LCD w/ Backlight

Display Resolution Inch: 0.01”, 0.001” or 0.0001” (selectable)Metric: 0.1mm, 0.01mm or 0.001mm(selectable)

Measuring Range Standard Mode: 0.010” – 0.787” (steel)

Accuracy +/-0.0002” (0.005mm) if thickness < 3mm+/-0.002” (0.05mm) if thickness < 20mm

Sound velocity range 3280-32805 ft/s (1000-9999m/s) AdjustableUpper/Lower Limit Preset Alarm YesOperating temperature 32-122 degrees FRefresh Frequency 4MHz up to 25MHzMemory 500 Test ValuesOutput N/APower supply AA alkaline batteries (2pc)Battery Life Approx. 200 hours (w/backlight off)Power consumption Working current is less than 3VDimensions 5.86” x 2.87” x 1.25” (149 x 73 x 32mm)Weight 5.6oz (160g)

UTG-2650 comes complete with Certificate of Calibration, Operation Manual and Custom Carry Case.

5 Year

Warranty

UTG-2000 Ultrasonic Thickness Gauge- Basic Touch/ReadUTG-2020 Ultrasonic Thickness Gauge- w/Memory, Output & PrinterState of the art, digital testers are menu driven, multi-functional units offering everything from the basic measurement to extended memory and RS 232output capabilities. This dynamic series of gages are designed to measure the thickness of metallic and non-metallic materials such as aluminum, titanium,plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2000 series gages willaccurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.

UTG-2000 UTG-2020Display type 4-digit LCD 4-digit LCDMinimum display unit 0.001”/0.01mm 0.001”/0.01mmMeasuring Range 0.04-8.0” in steel w/standard probe 0.04-8.0” in steel w/standard probeDisplay accuracy 0.001” / 0.01mm 0.001” / 0.01mmSound velocity range 3280-32805 ft/s (1000-9999m/s) 3280-32805 ft/s (1000-9999m/s)Operating temperature 32-122 degrees F 32-122 degrees FFrequency 5MHz 5MHzUpdate range 4Hz 4HzMemory N/A Up to 4000 ValuesOutput N/A RS232 via supplied cablePrinting N/A via Supplied Mini-Printer w/Cables & AdapterPower supply 1.5v AAA alkaline batteries (2pc) 1.5v AAA alkaline batteries (2pc)Battery life Approx. 250 hours/set Approx. 250 hours/setPower consumption Working current is less than 3V Working current is less than 3VDimensions 4-1/4 x 2-3/8 x 1” 4-1/4 x 2-3/8 x 1”Weight 4.7oz 4.7oz

Both versions come complete with Certificate of Calibration, Operation Manual and Custom Carry Case.

Model No. UTG-2020: standard unit incorporates vastmemory functions, mini-printer, PCcable, charger, operations manual

Model No. UTG-2020: standard unit incorporates vastmemory functions, mini-printer, PCcable, charger, operations manual

Model No. UTG-2000: standard unit has measuringcapabilities only

Model No. UTG-2000: standard unit has measuringcapabilities only

5 Year

Warranty

Model No. DescriptionRangeUTG-0500 5-Step BlockUTG-0100 NIST Traceable Certificate

Model No. DescriptionUTG1000-800 4oz. Bottle of Couplant GelUTG1000-850 Gallon-Couplant Gel

Stock No. Description Compatibility Comments

UTG2000-020 2” Inside Diameter Probe5Mhz - 12mm dia. 90º angle

UTG1000/2000/2020/2800 For testing inside cylindersw/2” diameter

UTG2000-030 3” Inside Diameter Probe5Mhz - 12mm dia. 90º angle

UTG1000/2000/2020/2800 For testing inside cylindersw/3” diameter

UTG2000-400 12mmø – 90º angle – 5Mhz UTG1000/2000/2020/2600/2800 General Purpose

UTG2000-420 6mmø – 90 º angle – 5Mhz UTG1000/2000/2020/2600/2800 For testing small areas

UTG2000-440 14mm ø – 90 º angle – 2.0Mhz UTG1000/2000/2020 For testing Rough Surfaces(min thickness of .07”)

UTG2000-450 12mm ø – Straight – 5Mhz UTG1000/2000/2020/2800 For testing Hi Temperature(up to 930 º)

UTG2000-475 6mmø – 90 º angle – 7.5MhzRigid extended probe

UTG1000/2000/2020/2800 For testing in deep inside bores

UTG2600-400 4mmø – 0 º angle – 5Mhz UTG-2000/2020/2600/2800 For testing extremely small areas

UTG2600-400* 8mm ø – 90 º angle – 5Mhz UTG-2600 only General Purpose

UTG2600-420 12mm ø – 90 º angle – 2.25Mhz UTG-2600 only For testing porous materials/rough surface

UTG2800-400* 10mm ø – Straight – 5Mhz UTG-2800 only General Purpose

UTG2800-420 14mm ø – 90 º angle – 2.50Mhz UTG-2800 only For testing porous materials/rough surface

Main Technical Data:• Measuring range: 0-1000µm or 0-40mils• Resolution: 0.1µm/0.01mils(0-99µm)

or 1m m (over 100µm)• Guaranteed tolerance: After one-point calibration:

=/- 1-3%n or 2 µm (whichever is greater)• Display: 4 digits (digit height = 10mm/0.4”)• Min. measuring area: 0.2” x 0.2” (5mm x 5mm)• Min. radius of curvature: Convex: 0.12” (3mm)

Concave: 1.2” (30mm)• Min. substrate thickness: Ferrous: 20 mils (0.5mm)

Non-ferrous: 2 mils (50 mm)• Calibration: Zero Calibration/Foil calibration

* Max. Surface temperature of test object: 302 degrees F(contact time max is 2 seconds)

• Power source: 4-AAA batteries• Dimensions: 161 x 69 x 32mm• Weight: 9oz. (260g)

PTG-3500 Integrated Coating Thickness GageThe PHASE II PTG-3500 series of gages can perform two different methods of calculating thickness measurement by utilizing the characteristics ofboth eddy current and magnetic induction. Testing performance is both non-destructive and extremely accurate. With these state of the art thicknessgages, you can easily detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magneticconductive substrate (non-ferrous) utilizing either an integrated probe or our version that comes with an external probe.The PHASE II PTG-3500 canbe used in many areas of industry including manufacturing, general engineering, commercial inspection, etc.The PTG-3500 utilizes an integrated probe that can automatically detect a Ferrous or Non-Ferrous substrate and comes with 2 substratesamples(steel,aluminum), 4 calibrated thickness samples, carry case, batteries and operation manual.

5 Year

Warranty

5 Year

Warranty

PTG-4500

This sleek integrated coating thickness gauge is capable of measuring coatingson Fe and NFe metallic substrates and has a push button FLIP screen for easyreading while testing upside down.

The PTG-4500 comes with 2 metal zero plates and test specimens for quick andeasy one point calibrations.

Specifications:Measuring Range: 0-1000µm (0-40 mils)Accuracy: +/-2 µm +3%H (H=actual value)

+/-0.1mils +3%H (H=actual value)Display: 3-DigitsMin Measuring Area: 0.2” x 0.2” (5mm x 5mm)Min Substrate Thickness: Fe: 20mils(0.5mm)

NFe: 2 mils (50mm)Calibration: Zero Calibration

Foil CalibrationMax Surface Temp: 302ºF (2 second max)Power Source: 1pc AAA Battery

Features:•Heavy-Duty Construction• Direct Dial Readings in lbs/kg• Extreme Accuracy to +/- 1%• Designed for tension/compression measurements• Versatile range of gages are supplied in complete test kit

form containing full set of accessories and carry case.•Can be hand-held or mounted to optional test stand

Optional Test Stand on Page 31

Model No. Capacity Resolution

AFG-0100 2 lb / 0.90kg 0.01

AFG-0200 5 lb / 2.26kg 0.025

AFG-0300 10 lb / 4.53kg 0.05

AFG-0400 20 lb / 9.07kg 0.1

AFG-0500 50 lb / 22.67kg 0.25

AFG-0600 100 lb / 45.36kg 0.5

Features:• Heavy-Duty Construction• Extreme Accuracy to +/- 0.5%• Designed for tension/compression measurements• Min/Max Setting with Go/No Go Light Feature• Peak value controls• Auto weight conversion• Versatile range of gages are supplied in complete test kit

form containing full set of accessories and carry case.• Can be hand-held or mounted to optional test stand

Optional Test Stand on Page 35

Model No. Capacity Resolution

DFG-01002 N7.19 oz203.94 g

0.001N0.001oz0.0001kg

DFG-02005 N17.99 oz509.85 g

0.001N0.001oz0.0001kg

DFG-030010 N2.25 lb1 oz

0.005N0.0005 lb0.005 oz

DFG-040050 N11.24 lb5.10 kg

0.01N0.001 lb0.001 kg

DFG-0500100 N22.48 lb10.19 kg

0.05N0.005 lb0.005 kg

DFG-0600500 N112.40 lb50.99 kg

0.1N0.01 lb0.01 kg

DFG-07001000 N224.80 lb101.97 kg

0.5N0.05 lb0.005 kg

Features:• Universal design enables user the ability to test multiple

physical properties such as insertion, withdrawal, tension,compression and fracture type tests.

Dimensions:Length: 9.25” (235mm)Width: 5.98” (152mm)Height: 15.75” (400mm)Weight: 22 lbs AFG-1000

Optional 90° AdapterPart No. RGB1000-090

Features:• Portable, rugged design enables user to view critical

components in high resolution through access holes as smallas .160” (4mm).

• Utilizes a high intensity tungsten halogen light sourceoperated by 2 AA batteries.

• Built-in light source affords user extreme versatilityanywhere in the shop.

• Supplied with Custom Fitted Carry Case.

Model No. DescriptionRGB-1000 7” Rigid Borescope KitRGB1000-090 90° adapter for 1000RGB-1700 17” Rigid Borescope KitRGB1000-090 90° adapter for 1700

Dimensions RGB-1000 RGB-1700Working Length 7” 17”

Overall Length 9” 19”

Diameter of tube .160” (4mm) .160” (4mm)

Field of View 65° Wide Angle 65° Wide Angle

Features:• Quick accurate analysis for checking balance and alignment of a rotating object.• Large LCD display• Statistics: Mean, Max, MIN, No. of Measurements and Std deviation• Inch/Metric Conversion with the push of a button• Max Hold Function• Regulated Output(AC output 2.0v peak full scale

DVM Includes:• 1-Powerful Magnet• 1-Accelerometer• 1-Stinger Probe (cone)• 1-Stinger Probe (Ball)• Operation Manual• Carry Case

Multi-functional meter is capable of measuringVelocity, Acceleration, Displacement and RPM Frequency.


DVM-1000 Digital Vibration Tester

Acceleration<None>Peak Value: 0.1 – 200 m/sor 0.3-656 ft/m/s

Frequency Range: 10Hz-1KHzFrequency Range: 10Hz-10KHz

Velocity(RMS)RMS: 0.1-400 (mm/s)or 0.004 -16.0 inch/s

Frequency Range: 10Hz-1KHz

DisplacementPeak to Peak: 0.001 – 2.0(mm)or 0.04-80mil

Frequency Range: 10Hz-500Hz

RPM Frequency 5-100,000 r/minFrequency 0.1 – 10KHzAccuracy <5%Operating Temp 0-45°CPower 4-AAA BatteriesDimensions 161 x 69 x 32mmWeight 300g

5 Year

Warranty

“The Source of Quality”

283 Veterans Blvd., Carlstadt, NJ 07072-2708Phone (201) 933-6300 • Fax (201) 933-3801

www.phase2plus.com

We take pride in the products we sell and the services we provide:

• Instrumentation that is engineered for accuracy and dependability

• New product development and innovation

• Access to calibration/certification services

• Highest level of customer satisfaction

• Expert technical assistance

• On-time delivery

• Website: www.phase2plus.com for access to our complete productline as well as our tradeshow schedule manuals and tables.

• 5-Yr Warranty against manufacturers defects where noted.All other products have a 1-yr warranty.

• International product sourcing:Refer to our website www.phase2plus.com for detailed information.Call us for more information.

We guarantee that your product will be manufactured to thehighest degree of quality and shipped according to schedule.

Thank you for your continued supportand we look forward to serving you in the future.

CALL TODAY for yourTOOLING & MEASURING CATALOG

catálogo de metrología

Documents

qualitythe phase

days of receipt

toll free1

product support

eachnew product

veterans blvdcarlstadt

ourcustomer service

ordercall tollfree1