certsgrade 350-080 coaching kits

CCIE Data Center

Written Exam 350-080

CCIE Data Center Written Exam

Buy Full Product http://www.certsgrade.com/pdf/350-080/

Version = DEMO

w w w . c e r t s g r a d e . c o m CERTSGRADE High Grade and Valuable Preparation Stuff

http://www.certsgrade.com/pdf/350-080/�

h t t p : / / w w w . c e r t s g r a d e . c o m / p d f / 3 5 0 - 0 8 0 /

2 | P a g e

Version: 35.0 Question: 1 Refer to the components below. Cisco UCS 6100 Fabric Interconnect Cisco Nexus 1000V Cisco UCS 5100 Blade Chassis Which data center design layer contains these components? A. the Virtualization layer B. the Management layer C. the Compute layer D. the Services layer Answer: C Question: 2 Which two options describe virtualized multi-tenancy? (Choose two.) A. dedicated infrastructure for each tenant B. shares a common infrastructure between tenants C. agreement between tenants with rules about sharing DC resources D. tenants using virtualization technologies to separate from each other E. data centers using virtualization technologies to separate tenants Answer: B, E Question: 3 Which three statements best describe the Cisco Unified Fabric solution for the data center? (Choose three.) A. Cisco Nexus 5000 Series Switches provide the capability to consolidate LAN and SAN traffic on a unified fabric over Ethernet. B. The unified fabric is delivered throug h technologies such as FCoE and DCB C. FCoE allows transmission of Fibre Channel traffic over Ethernet by encapsulating native Fibre Channel frames into GRE and transporting them across the Ethernet network. D. FCoE allows consolidating Fibre Channel traffic from multiple VSANs into the same Ethernet VLAN to be transported across the fabric. PFC ensures lossless transport of the FC traffic over Ethernet. E. PFC allows user priorities to be defined on a single physical link, each of which can have its own logical lane that can be paused independently of the others. Answer: A, B, E



3 | P a g e

Question: 4 Cisco Nexus 5000 Series Switches are best positioned at which layer? A. access layer, as an end-of -row switch for FCIP and iSCSI aggregation B. distribution layer, with multiples of 10 Gb/s ports C. access layer, as a top-of - rack switch for server I/O consolidation with FCoE D. aggregation layer, supporting virtual security and application services Answer: C Question: 5 Which component of the Cisco Nexus 7010 architecture provides out-of-band management, an always-on microprocessor for disaster recovery, and remote restart capabilities? A. central arbiter B. Connectivity Management Processor C. supervisor engine D. dedicated s ervice modules Answer: B Question: 6 Which two Cisco devices form the virtual access layer in the Cisco Data Center Architecture? (Choose two.) A. Cisco Nexus 7000 B. Cisco Nexus 5000 C. Cisco Nexus 1010 D. Cisco Nexus 2000 E. Cisco Nexus 1000V Answer: C, E Question: 7 Which three components does a data center network layer have? (Choose three.) A. Cisco GSR B. Cisco CRS - 1 C. Cisco Nexus 7000 D. Cisco Nexus 1000V E. Cisco Nexus 2000



4 | P a g e

F. Cisco ASR 9000 G. Cisco Nexus 5000 Answer: C, E, G Question: 8 On a 32-port 10 Gigabit Ethernet module, each set of four ports can handle 10 Gb/s of bandwidth. What can you use the rate-mode parameter for? A. to limit the speed on any port B. to dedicate all the group bandwidth to the first port C. to dedicate all the group bandwidth to the last port D. to limit the speed on all ports Answer: B Question: 9 On a Cisco Nexus 7000, a CoPP can be applied separately to each VDC. A. True B. False Answer: B Question: 10 The persistent storage service (PSS) is used by which function? A. storage of log files across reloads of the system B. storage of license files in the backplane EEPROM C. storage of the process-specific state for stateful process recovery D. storage of core dump files from crashed processes Answer: C Question: 11 A Cisco Nexus 7000 switch is used with the VRF feature to provide separation between the inside and outside interfaces of a transparent firewall. The VRF RED is used for an untrusted network of the virtual data center, and it is connected to the outside interface of the firewall. The VRF GREEN is used as a trusted network of the virtual data



5 | P a g e

center and is connected to the inside interface of the firewall. Subnet 10.10.10.0/20 is used to communicate between two VRFs across the transparent firewall. The firewall is configured correctly. The network administrator configured the VRFs and IP addressing correctly, but you are still unable to communicate across the firewall.

What is a likely cause of the problem? A. This topology is incorrect. A transparent firewall cannot be used with VRF. B. On Cisco Nexus 7000, policy-based routing is required to communicate between two VRFs. C. The issue is related to software licensing; an Enterprise Services license is required on Cisco Nexus 7000. D. The issue is related to the MAC address of the SVI. E. The issue is related to keepalive, which is not supported on the SVI. Answer: D Question: 12 What does the previously active supervisor do when "system switchover" is issued? A. State is transferred and then becomes ha -standby. B. A core dump file is written, state is transferred, and the system resets. C. State is transferred; the supervisor reloads and becomes ha -standby. D. State is transferred; data plane operations are briefly suspended and then become ha -standby. Answer: C Question: 13



6 | P a g e

Which statement about basic Zoning are true? Choose two) A. Administrator can make simultaneous configuration changes upon activation, one administrator canoverwrite other admin changes. B. If a zone is part of multiple zone sets, you create one instance of this zone for both zone sets. C. To distribute the zoning database to must reactivate the same zone set. The reactivation may affecthardware chances for hard zoning only on the local switch , remote switches are not affected. D. To retrieve the results of the activation on a per switch basis, the managing switch provides combinedstatus about the activation and identifies the failure switch. E. The default zone policy is defined per switch, To ensure smooth fabric operation all switches in the fabricmust have the same default zone settings. Answer: D Question: 14 Which Cisco Nexus 1000v switch CLI command is used to verify the connection between the Cisco Nexus 1000v Series switch and Vmware? A. show module B. show svd console C. show svs connections D. show svs domain E. show svd domain Answer: C Question: 15 Refer to the exhibit.



7 | P a g e

Which two statements are true? (Choose two) A. No server ports are configured. B. Four port channels are configured and they all are up. C. One port is not configured. D. No uplink ports are configured. E. Two appliance ports are configured. Answer: BC Question: 16 Which EtherType is used to identify FIP? A. 0x8906 B. 0x8915 C. 0x8905 D. 0x8914 Answer: D Question: 17 Refer to the exhibit.



8 | P a g e

Which two reasons explain why vPC peer-switch is not working? (Choose two.) A. The feature is not enabled on the vPC peer. B. The peer keepalive link is down. C. Cisco Discovery Protocol is not configured. D. vPC peers are not the root of spanning tree topology. E. LoopGuard is disabled. Answer: AD Question: 18 Which two statements about the clear zone database vsan 2 command when performed on a Cisco Nexus 5500 switch are true? (Choose two.) A. Zone set for VSAN 2 is cleared from all switches in VSAN 2. B. The full zone set database is cleared for VSAN2 and the active zone set database for VSAN2 is untouched. C. This command is valid only if the feature clearzone is enabled. D. The active and full zone set for VSAN2 is deactivated and erased from the local switch. E. You must issue the copy running-config startup-config command to copy the active zone set database to the full zone set database after this command. Answer: AC Question: 19 Which three statements about the virtual service domain on Cisco Nexus 1000V Switch are true? (Choose three.) A. Any traffic coming or going out of the VSD must go through the service virtual machine. B. The show virtualservice_domainname command displays the configurations for this VSD port profile. C. Service virtual machine only snoops the data and is used for monitoring purposes. D. A VSD is collection of interfaces that are guarded by the service virtual machine.



9 | P a g e

E. vMotion is supported for the service virtual machine and should not be disabled. F. A virtual service domain (VSD) allows you to classify and separate traffic for network services. Answer: ABD Question: 20 Dynamic ARP inspection ensures that only valid ARP requests and responses are relayed. Which three activities does a Cisco NX-OS device perform when DAI is enabled and properly configured? (Choose three.) A. Verifies that each of these intercepted packets has a valid IP -to-MAC address binding based only on DHCP snooping binding database. B. Verifies that each of these intercepted packets has a valid IP -to-MAC address binding based only on DHCP snooping binding database or statically created entries. C. Intercepts ARP request and responses on all ports. D. Pass-through an invalid ARP packets. E. Drops invalid ARP packets. F. Intercepts ARP request and responses only on untrusted ports. Answer: BEF



10 | P a g e

THANKS FOR TRYING THE DEMO OF OUR PRODUCT

Click the Link Below To Get Full Version

http://www.certsgrade.com/pdf/350-080/

PRODUCT FEATURES

100% Money Back Guarantee 90 Days Free updates Special Discounts on Bulk Orders Guaranteed Success 50,000 Satisfied Customers 100% Secure Shopping Privacy Policy Refund Policy

WE ACCEPT



certsgrade 350-080 coaching kits

Documents