gladstone regional councilinfo.gladstonerc.qld.gov.au/meetings/20130219/attachments... ·...

GENERAL NOTES 1.0 CONSTRUCTION

Contractors must verify all dimensionson site, and notify Smith MaddenGroup of any discrepancies prior tocarrying out any works. Writtendimensions take precedence overscaled dimensions.

GLADSTONE REGIONAL COUNCIL RETAINS COPYRIGHT ON THIS DRAWING.

Stage / Drawing NoMelbourne +61 3 9663 6055 Job No

Revision

Scale @ A1

Date

Designer Drawn

Project Manager

www.smithmadden.com.au

Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522

Flush RevealsFinish glazing and door opening reveals with minimum 18mm thick customwood securedto studs & plates, completed with chamfered edges for taping and flushing smooth withplasterboard. Ensure fixing points are positioned behind proposed extrusion points whereapplicable.

Plasterboard TrimFinish external edges & internal corners with purpose made corner beads & stop beadsflushed smooth with plasterboard. Use continuous lengths to avoid joins

1.3 DEMOLITION

The demolition of all parts nominated is to be done within a pre-arranged program withthe Project Manager. It shall take place to cause least inconvenience to the Owner.Contractor to arrange for the tenancy to remain secure as demolition occurs. TheContractor shall allow for any temporary propping as a result of any items to bedemolished and to minimise interference to internal occupation.Apart from material nominated for re-use within this specification and contract drawings alldemolished materials become the property of the Contractor and shall be removed fromsite at the Contractors expense.

1.4 WALL PANELLING

Supply and install wall panelling where indicated on Smith Madden Group DWG.

1.5 OPERABLE WALLS

Install operable wall to area indicated on Smith Madden Group DWG.

Refer to Finishes Schedule for specification

Operable wall shall consist of top supported, manually operated panels that can be linkedtogether to form a sound retardant closure. Panels shall be constructed of a sandwich ofboard and/or steel separated by acoustics insulation to achieve the specified.

1.6 FIRE RATED PARTITIONS

Generally construct 2-hour fire rated partitions. Refer to Smith Madden Group DWG

Construct partitioning using 92mm steel studs removing ceiling tiles & tee bars asnecessary & restoring as modified. Clad both sides of partitions with two layers of 16mmthick plasterboard staggering joints.

1.7 TRIMS

Generally supply accessories and trim necessary to complete the installation.

1.7.1 Aluminium Glazing FramesInstall glazing frames where nominated on the drawings using extruded aluminiumsections unless otherwise noted in single lengths where possible and mitre corners.Aluminium frames to comply with A.S. 2047 & 2048.

Finish & Framing System: See Finishes Schedule.

1.7.2 Timber Glazing Frames

As per Smith Madden Group DWGS and Schedules.

1.7.3 Aluminium Door Frames

Install full height door frames to doors where nominated on the drawings using extrudedaluminium sections in single lengths and mitre corners. Install rubber covering strips tofixing channels and door seals.

1.7.4 Timber Door Frames

Finish & Framing System: See Door Schedule.

1.7.5 Timber Skirtings

Install full height polished door frames to doors as detailed - refer to door schedule.

As per Finishes Schedule.

1.7.6 Aluminium Skirting

Install 100mm high aluminium skirting to all internal partitioning unless otherwise noted.Use continuous lengths where possible to avoid joins and mitre at corners. Finish : SeeFinishes Schedule.

1.8 DOORS & HATCHES

Definition:

Doorset: An assembly comprising a door or doors and supporting frame, guides and tracksincluding the hardware and accessories necessary for satisfactory operation. Door types:To AS 2688. Installation: To AS 1909· Aluminium Door Sets Material and Performance: AS 2047.1· Construction and Installation: AS 2047.2

Refer to Door Schedule for details.

1.9 HARDWARE (DOOR & WINDOW)

Locks & Latches

Mechanical locksetsStandard: To AS 4145.2

Generally supply & install new hardware to all doors as specified on the door schedule.

DRAWING INDEX

ALL WORKS TO BE UNDERTAKEN IN COMPLIANCE WITH THE CURRENTAUSTRALIAN STANDARDS AND BCA.

This document is a generic scope of works and is intended to provide information for aminimum standard of installation for the works.

The Quotation to be based on but not limited to the following scope of works as per thedrawings and schedules provided by Smith Madden Group. Engineering drawings/scopeof works will be provided when required.

Please make provisions for any items not specified which may be necessary to make thework complete and perfect in all respects and ready for operation. Any additional itemsto be nominated as itemised costs.

The works to be carried out for this project shall be performed in accordance with thegeneral conditions & technical requirements equivalent to that existing on site.

The works shall comply with:o Building Control Acto Relevant Actso Industrial Codeso Current Issue of Relevant Australian Standardso Requirements of Relevant Statutory Authoritieso Occupational Health & Safety Requirementso Tenancy Guidelines for the Buildingo Other Local Regulations Relevant to such Installations

Australian Standards and codes & companion standards & codes current at the tenderdates shall apply to the contract works.

The contractor shall obtain necessary forms and give notice, in the format withsupporting information required to authorities having jurisdiction, obtain requiredapprovals & permits and pay associated fees including all council permit applicationsrelating to hoardings, footpaths, street closure etc.

New materials, equipment and components of first quality & current approvedmanufacturers of the various fittings, equipment and components shall be maintained.

The contractor shall:o Check all dimensions on architectural drawings and on site before construction.o Provide defect and warranty in accordance with the main contract.o Inspect the site and allow for all work necessary to complete the installation.

SHOP DRAWINGS:

Where Engineers drawings are not included PRINCIPAL CONTRACTOR to provideshop DWGS for Hydraulic, Mechanical, Electrical, Comms and Fire Protection Services,SMG and engineer approval for submission of a staged building permit.

TESTING/AS BUILTS CERTIFICATION:

Contractor for each service shall provide 3 hard copies and 1 soft copy (CD) of As BuiltDrawings and certification, inclusive of Certificate of Compliance on completion of Works.The drawings are to be completed using the contractor’s company title block on thedrawing.

Maximum 3 weeks after practical completion.

1.0 CONSTRUCTION

1.1 PRELIMINARIES

All contractors to refer to all of the relevant drawings as noted.

All drawings available upon request from Smith Madden Group. Refer to appropriateschedule for all finish, door, chair, joinery and appliances.

DRAWINGS/SCHEDULESRefer to Drawing Transmittal sheet for full list of project documentation

LOADING & OFF LOADING:Contractor will contact the Smith Madden Group Project Manager regarding the bookingof the goods lift, working hours & general regulations relevant to construction on site.

PARKING:There is no provision for private vehicle parking for trades personnel. Use public parking.

INSPECTION:Contractors will be required inspect the site at the mandatory briefing prior to submittingtenders.

PLASTIC SHEETING:Cover areas effected by partitioning and services alterations with plastic, overlapping andtaping joins in continuous lengths. Covered areas should extend a minimum of threemetres past the effected areas & include traffic points from & to lift cars and stairwells.Ensure all rips & tears in the plastic incurred during construction are repaired immediately.Adequately clean plasterboard dust and building debris from the plastic protection forcleaning of workboots prior to entering lifts or leaving the site.

WORKING HOURS:Normal working hours shall be worked, but some activities may need to be undertakenat times to minimise the disruption to the owner. Such work must agree with the ownerand sufficient notice of intent to perform such work must be given to the owner.

Head Contractor to allow for all slab penetrations, scabbing and chasing to be doneoutside office hours

DUST CONTROL:The Contractor shall allow for providing polyethylene sheet dust proofing between areasof work and areas of occupation.

TEMPORARY SERVICES:The Contractor shall provide sufficient notice of intents. The Project Manager must beprovided with seventy two (72) hours prior to work where services will be interrupted.

SET OUT:Every effort is made to provide sufficient dimensioning for setout. The Contractor shallnotify the Smith Madden Group Project Manager of discrepancies.

CLEANING:On completion thoroughly clean the structure and surroundings.

1.2 PARTITIONING

BCA COMPLIANCE:

General: The work under the Subcontract shall comply with the Building Code of Australia,including but not limited to requirement properties for acoustic attenuation and fireresistance.

Test certificates: Obtain from an Independent Testing Authority approved by theSuperintendent, test certificates which evidence compliance of the respective material,components and assemblies.

Fire Hazard: Comply with BCA requirements. Do not use materials which, when subjectto fire conditions, will emit excessive smoke or dangerous fumes.

CONSTRUCTION GENERALLY:

Refer to drawings for partition type. All partition walls to be type P1 unless otherwiseindicated on the drawings.

Construct partitions generally to manufacturer’s specification, Install studs with compatiblesteel top and base plates secured direct to substrate or suspended ceiling tee bars. Installadditional studs where overhead cabinetwork and fixtures are nominated for securefixings.

InsulationInstall insulation as per Smith Madden Group DWGS to all partitions packing tightlybetween studs & around conduits & the like for maximum sound attenuation unlessotherwise specified or shown on the drawings.

Acoustic Plaster BafflesExtend partitions full height above ceiling to U/S of slab where indicated on drawing.Allow for deflection head to U/S of slab. All holes in plaster due to services penetrations tohave caulking applied.

Acoustic Insulation above Ceiling TilesInsulation to ceiling board above ceiling. Install insulation above ceiling tiles as indicatedon drawings. Type Autex sound blanket ASB4 70mm.

Acoustic SealsEnsure Uniseal foam strips in continuous lengths are installed between top plates & ceilingsurfaces & between partition ends & masonry walls & columns for maximum soundattenuation.

PlasterboardStandard: To AS 2588 generally. To ASTM C630 for water-resistant plasterboard.

Grades:General areas: Standard grade.Moisture prone areas: Water-resistant grade.Fire rated installations: Formulated for additional resistance to fire exposure.Thickness (mm): Unless otherwise specified or shown on the Drawings,13 mm, generally.16 mm, for fire rated elements.Edge finish: Recessed for flush-set plaster joints.Fibre cementStandard: To AS 2908.2Type: Type B category 2.Type: Recessed edge for flush-set plaster joints.Thickness (mm): 6.FastenersSteel nails: Hot dip galvanizedAdhesivesContact adhesives: to AS2131.For plasterboard: To AS 2753.For wallboards: Mastic adhesive.

LiningAcoustic Performance CriteriaFor acoustic performance requirements, including but not limited to: linings, fixingmethods, acoustic isolation, etc.Acoustic PartitionsSTC 35: One layer of 13mm Gyprock either side of 64mm steel stud - no insulation.STC 40: One layer of 13mm Gyprock either side of 64mm steel stud with S3 insulation.STC 46: 2 layers of 13mm Gyprock one side and 1 layer of 13mm Gyprock other side of64mm steel stud with S4 insulation.STC 55: 2 layers of 13mm Fyrchek either side of 84mm staggered steel studs in 92mmsteel top and bottom tracks with S4 insulation.STC 62: 2 layers of 16mm Fyrchek either side of 92mm separated steel studs with S4insulation.Generally:· Clad both sides of studwork with 13mm recessed edged plasterboard, taping &sanding smooth sheet joins & fixing penetrations unless noted otherwise.· All partitioning is to be full height unless otherwise specified.· The existing ceiling height is to be confirmed on site as required. Check at variouslocations to gauge consistency of height.· Where indicated on the drawings half height partitions construct solid partitions toa height as indicated in Smith Madden Group DWG with glass above to full height.· Where partitions abut window mullions, paint reveal ‘black’ & install foam sealingstrip between mullion & partition reveal. Do not screw into window mullions. Wherepartitions do not abut window mullions, glazed fins to be installed and secured by siliconfixing.Cut around sills & ducted skirting as necessary in order to ensure flush joins betweenpartitions & substrate.

1.0 CONSTRUCTION

1.10 GLAZED PARTITION

DesignCertification: Submit certification from a Chartered Professional Engineer confirmingcompliance with AS 1288.Glass toleranceSize, squareness and flatness: To AS 2208.Plate and sheet (i.e. not patterned):

Overall bow and warpage: To AS 2208.Roller wave: Maximum 0.15mm

Float glass qualityGlazing Select Quality q3 to ASTM C 1026.Safety glassesStandard: To AS 2208.

Install clear nominal 10.38mm and/or 12.38mm glazing as required by appropriatebuilding codes and Australian Standards to frames specified to receive glass as shownon drawings.

Where glass panes join leave 10mm gap between panes and fill with clear siliconesealer, cutting smooth with the edges of the glass. All surplus silicone to be cut awayfrom joining.

1.11 PAINTING

GeneralPainting: Comply with the recommendations of those parts of AS 2311 and AS/NZS 2312

Paint the following surfaces in their respective finishes. Refer to SMITH MADDEN GROUPDWG & Schedules for exact locations of paint finishes.

Ceilings & Walls -Plasterboard· Ensure plasterboard is flat and smooth. Nominated areas shall be cleaned of allsurface pollutants to provide a sound surface for repainting. Remaining loose, flaking orblistered paintwork shall be removed by scraping and sanding to a firmly adhered edge.All edges shall then be feathered off using hand sanding prior to bare areas being spotprimed with a suitable primer for the surfaces concerned. Fill cracks and surfaceimperfections and patching plaster. Any gaps from structural movement should be filledwith a paintable flexible gap sealant. Sand smooth and dust off thoroughly

CEILINGS:· First Coat - Acrylic Sealer Undercoat· Second Coat - Wash and Wear Flat Acrylic· Third Coat - Wash and Wear Flat Acrylic

WALLS:

· First Coat - Acrylic Sealer Undercoat· Second Coat - Wash and Wear Low Sheen Acrylic· Third Coat - Wash and Wear Low Sheen Acrylic

Interior Timber - Timber including core doors. Ensure the timber is thoroughly drybefore commencing. Fix any defects such as splits, dents etc with acrylic wood filler andsmooth off. Remaining loose, flaking or blistered paintwork shall be removed by scrapingand sanding to a firmly adhered edge. All edges shall then be feathered off using handsanding prior to bare areas being spot primed with suitable primer for the surfacesconcerned. Make sure area is clean sound and dry.First Coat - PrimerSecond Coat -Semi Gloss EnamelThird Coat -Semi Gloss Enamel2 Pack Paint Finish to MDF - High GlossPrepare imperfections and fill nail holes. Sand smooth cut edges and dust down. Applyprimer and if necessary resand cut edges to smooth down raised fibres.First Coat - Luxepoxy 4 White PrimerSecond Coat - Acrathane IFThird Coat - Acrathane IF

Metal/Steel - Nominated areas shall be cleaned of all surface pollutants to provide asound surface for repainting. Remaining loose, flaking or blistered paintwork shall beremoved by scraping and sanding to a firmly adhered edge. All edges shall then befeathered off using hand sanding prior to bare areas being spot primed with a suitableprimer for the surfaces concerned.

First Coat - PrimerSecond Coat - High Gloss EnamelThird Coat - High Gloss Enamel

The substrates shall receive the following specified coating systems:Existing walls: touch up, one coat systemNew Walls: three coat systemExisting doors and frames: touch up onlyNew doors and frames: three coat systemExisting Stair steelwork touch up, one coat system

1.12 WHITEBOARDS & PINBOARD

Supplied & Installed by Head Contractor. See Loose Furniture Schedule for details.

1.13 CEILING (SUSPENDED)

GeneralSuspended ceilings: To AS 2785Luminaire & Diffuser interfaces; To AS 2946

1.13.1 Ceiling Grid & System Tile (New)

Head contracter to supply & Install new base building ceiling works including grid andtiles unless otherwise indicated.

The contractor is to furnish all materials, labour and equipment for the erection of theRondo Aluminium Ceiling System as indicated on the Smith Madden Group DWG.Rondo Aluminium Ceiling System shall be installed as recommended by manufacturer.

1.0 CONSTRUCTION

1.13.1 Ceiling Grid & System Tile (New) Cont...

Cross Runners shall intersect Main Runners and be positively locked together.Wall angle shall be securely fastened to the wall @ 600mm centres.Ceiling grid to have maximum deflect 1/360o. Extra hangers are to be provided forlight fittings, air conditioning units etc. that are supported by the grid system.

Ceiling Tile : refer to Finishes Schedule.

1.13.2 Ceiling Grid & System Tile (Existing)

The Head Contractor will be responsible for removing existing ceiling tiles for ease ofaccess to ceiling cavity. Store removed ceiling tiles on site and in area nominated bythe Building Supervisor. On completion of trade works, replace stored tiles toprevious positions.Head Contractor will be responsible for replacing any damaged ceiling tiles and teesuspension bars as necessary or as directed by the Project Manager.Partitioner shall allow to supply and install ceiling tiles where all redundant servicessuch as sprinkler heads, mechanical register, light fittings have been removed orrelocated.Partitioner to allow for minimum 10% replacement ceiling tiles as part of tender.

1.13.3 New Flush Plasterboard

Supply and install flush plasterboard suspended ceiling system.Supply and install flush plasterboard ceiling as recommended by manufacturer.The Primary Rail shall be hung on 5mm adjustable suspension rod accurately leveled.Suspension clips shall be at 1200mm centres along primary rail. Primary rails spacedout at 1200mm centers. Furring channels shall run at right angles to the primaryrails and be positively lock at maximum 600mm centers.Screw fixed 13mm plasterboard to furring channels at maximum 200mm center.Tape and set plasterboard joints suitable for painting.Supply and install control joints at 12m maximum centers in both directions.Provide additional hangers to support lights, air-conditioning etc. as required.Refer to Smith Madden Group DWG.

1.13.4 Flush Plasterboard Bulkhead

Contractor to supply and install flush plasterboard bulkheads including recessed lightcoffer as indicated on ceiling drawing and details.Refer to Smith Madden Group DWG

1.13.5 2-Hr Fire Rated Flush

Contractor to install 2-hour fire rated ceiling according to manufacturers instructions.Primary system: Top 2 layers of 16mm Fyrechek plasterboard screw fixed to furringchannels at maximum 200 centres. Furring channels shall be fixed 600 centresclipped to Primary rails at 1200 centres. Primary rails shall be fixed at 1200 centressuspended from concrete soffit by suspension rod system.Secondly system: Bottom 2 layers of 16mm Fyrechek fixed to furring channel of600mm centers screw fixed through to Primary System

Stop and set flush all joints, stagger plasterboard joints 200mm minimum.

1.14 Fire Seal

Fire Seal all penetrations through fire rated floor and walls with flexible water basedgunnable sealant for fire resistant sealing of joints and service penetrations, up to 4hour FRL when tested to AS 1530 part 4.Product to be similar and equal to Fyreguard - Fyre Seal Mastic.Install as recommended by manufacturer.

1.15 Smoke Seal

Smoke seal all penetrations through smoke rated floors and walls and ceiling withflexible gunnable sealant for smoke sealing of joints and penetrations up to 2 hoursto AS 1530 part 4.Product to be similar and equal to Fyreguard - Smoke Seal.Install as recommended by manufacturer.

1.0 CONSTRUCTION

The Area Indicated is indicative and cannot be used as an identification of the Actual Lease Area.

A

GLADSTONE REGIONAL COUNCIL

GLADSTONE REGIONAL COUNCILJCTN

RR

400597

A01.01113 GOONDOON STREET, GLADSTONE03.09.12

COVER SHEET TENDER

113 GOONDOON STREET, GLADSTONE

A01.01 COVER SHEET AA01.02 GENERAL NOTES & SPECIFICATIONS AA02 EXISTING CONDITIONS AND DEMOLITION PLAN BA02.01 DEMOLITION STAGING PLAN AA03 PROPOSED FLOOR PLAN AA04 SETOUT PLAN AA05 REFLECTED CEILING PLAN AA06 FINISHES PLAN AA06.01 FEATURE CARPET PLAN AA07 WORKSTATION PLAN & DETAILS AA08.01 JOINERY COVER SHEET AA08.02 JOINERY PLAN AA08.03 JOINERY DETAILS & ELEVATIONS AA08.04 JOINERY DETAILS & ELEVATIONS AA08.05 JOINERY DETAILS & ELEVATIONS AA08.06 JOINERY DETAILS & ELEVATIONS AA09 ELEVATIONS AA09.01 TOILET DETAILS AA09.02 TOILET DETAILS AA09.03 TOILET DETAILS A

Rev. Date Chk DescriptionA 23.11.12 TENDER

2.0 FLOOR FINISHES




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522

Refer to Finishes Schedule where necessary.

2.1 REMOVAL OF EXISTING FLOOR TREATMENTS & CARPET PROTECTION

Remove sections of existing floor finish to receive selected new sheet vinyl, new carpet,stone and tiled floor as indicated on documentation. Prepare existing substrate asrequired to allow for new floor finish as specified to AS/NZS 2455.1 or AS/NZS 2455.2

2.2 PREPARATION OF CONCRETE SLAB

Allow to screed concrete floor as required to achieve flush finish between differentfloorings and to allow for falls to all new & existing floor wastes as required.

2.3 JUNCTION BETWEEN FLOOR FINISHESProvide 3mm thick natural anodised aluminium strip at junctions of different floorfinishes.

All surfaces to be flush.

PVC & wide aluminium diminishing strips are only to be used in back of house (.i.e.store room door thresholds etc).

2.4 RESILIANT

Edges of sheets and tilesEnsure edges are firm, unchipped, machine-cut accurately to size and square to theface, and that tile edges are square to each other.UnderlaysHardboard: Standard hardboard Type RD, to AS/NZS 1859.4, manufactured specificallyas flooring underlay.Fibre cement sheet: To AS 2908.2, Type B, category 2 minimum.Synthetic sporting surfaces: to AS 3541.1CorkStandard: To BS 6826LinoleumStandard: To BS 6826RubberStandard: To BS 1711Polyvinyl chloride (PVC)Unback flexible sheet: To AS 2055.1Semi-rigid floor tiles: To AS 1889.1Flexible flooring, needle-loom felt backed: To BS 5085.1Flexible flooring, cellular PVC backed: To BS 5085.2

Contractor to sheet vinyl direct to concrete substrate to area nominated on SmithMadden Group DWG.

Seam weld joins where applicable with self coloured welding rods, cutting flush withvinyl surface.Allow to polish vinyl on completion of works.

2.5 CARPET

Product/Finish to be: Refer to Finishes Schedule

TolerancesStandard: To AS 1385

BatchingEnsure that carpet laid in a single area and of a single specified type, quality, colourand design, comes from one manufacturing batch and dye lot.

Insect resistanceInsecticide: Provide carpets and underlays composed entirely of materials eitherinherently resistant to insect attack, or treated against attack, including by moth andcarpet beetle, by application of insecticide to the yarn during the dyeing or scouringprocess.Standard: To IWS E-10

2.5.1 Underlays

StandardGeneral: To AS/NZS 2455.1

Soft underlayStandard: To AS 4288 (Int)Rubber: Heavy -duty vulcanised rubber, waffle pattern, with a backing of reinforcingfabric.Reinforcing fabric: Either hessian, spun nylon, or polyester.

2.5.2 Adhesives & Tapes

StandardGeneral: To AS/NZS 2455.1

AdhesivesGeneral: Compatible with the floor covering material, and suitable for bonding it to thesubfloor.

Hot-melt adhesive tapesCommercial grade glass fibre and cotton thermoplastic adhesive coated tape 60 mmwide on a 90 mm wide metal foil base and backed with silicon-coated release paper.

2.5.3 Substrate

StandardGeneral: To AS/NZS 2455.1 or AS/NZS 2455.2, as appropriate

Substrate preparationGeneral: Suitably prepare the substrate to receive the carpet installation, including thefollowing:

2.5.4 Feature Broadloom Carpet

Contractor to supply and install new feature carpet with new underlay direct doublestuck to concrete substrate as nominated on Smith Madden Group DWG.

2.5.5 Carpet Tiles

Product/Finish to be: Refer Finishes ScheduleTo be supplied by Contracter and laid in strict accordance with manufacturer’srecommendations.Refer to finishes schedule.

2.5.6 Tiling

Surface finish slip resistanceStandard: To AS/NZS 3661.1Required locations: To public and general areas unless otherwise scheduled.AS/NZS 3661.1

2.6.1 Adhesive

Tests: test the surfaces to determine the co-efficient of friction in accordance withAS/NZS 3661.1, Appendices A and B. Testing shall be carried out by an NATA-Maintenance: Provide recommendations for the future cleaning, care and maintenanceof the floor finishes as installed, to enable continued in-service compliance withregistered testing authority approved by the Superintendent. Submit the test certificatesto the Superintendent.GeneralStandard: To AS 2358PVA based adhesives

2.6.2 Mortar

MaterialsSand: Fine aggregate with a low clay content selected for grading.Cement type to AS 3972: GPWhite cement: Iron salts content less than or equal to 1%Off-white cement: Iron salts content less than or equal to 2.5%Lime: To AS 1672Water: To AS CA27Bedding mortarProportioning: Select proportions from the range 1:3 - 1:4 cement: sand to obtainMixing: To AS CA27

2.6.3 Waterproofing Wet Areas

ComplianceGeneral: Comply with the waterproofing of wet areas as required by the BCA and AS3740.

2.6.4 Tiling Generally

Ceramic tilingInstallation generally: To AS 3958.1, (and AS3740 for caulking).

2.6.5 Stone Tile

Supply and install new stone tiles as indicated on Smith Madden Group DWG.Product finish refer to finishes schedule

2.6.6 Vitrified Tile

Supply and install vitrified tiles as indicated on Smith Madden Group DWG...

Product finishes: Refer to finishes schedule.

2.6.7 Tanking

Supply and install tanking membrane to shower room over entire floor.Ensure all surfaces are dry and free from dust, oil etc. An all level drain shall beinstalled as per plumbing code and manufacturers instructions. All falls to 10mm permetre into drain. Prior to applying Emer-Clad in shower area prepare and prime thesubstrate in accordance with manufacturer’s surface preparation details.

Once completed, apply a fillet of Rallithane 810 polyurethane. Joint sealant should beapplied at the junction of the wall and floor (perimeter seal). A base coat of Emer-Cladshould be layered and a layer of polyester reinforcing fabric placed over all joints andwhere the walls and floors meet. Apply reinforcement over entire floor surface.

Apply multiple coats of Emer-Clad minimum 3, to achieve a dry film thickness of 500microns. Apply Emer-Clad to entire wall surface within shower recess to a height of1800mm and outside shower recess to a height of 150mm.

Water test membrane 48 hours after installation.

2.7 FEATURE RUG

To be supplied by Head Contractor.

Refer to Finishes Schedule

2.8 ACCESS FLOOR

Access floor contractor to supply and install access floor as nominated on Smith MaddenGroup DWG

Access floor Tasman TC 1000S consisting of interchangeable 600 x 600mm panelssupported and captured by bolted stringers to adjustable pedestal assemblies. Panelshall be high tensil top sheet welded to a die formed steel pan. Provided with factorybonded anti-static high pressure laminate. Understructure system shall consist of apedestal band and head assemblies.Pedestals will be provided with a means of levelling and looking at a selected heightwhich prevents vibration displacement.Allow for services outlets to accommodate power communications and data signedcables. Also allow for cutouts for Air Grilles for underfloor air-conditioning as required.The access floor contractor shall provide standard ramp, tactile indicators and handrailas located on drawing and to AS 1428.

3.0 WINDOW TREATMENTS

Refer to Finishes Schedules when necessary

3.1 MODIFY EXISTING BLINDS

Modify existing blinds to suit revised layout. Allow to cut existing blinds and supply newwhere new partitions butt up against external windows.

3.2 INTERNAL GLAZING FILM

Supply & install adhesive film to glazing as indicated on Smith Madden Group DWG.

3.3 PERIMETER BLINDS

Supply & install blinds to perimeter/ internal glazing as indicated on Smith MaddenGroup DWG and Schedule.

Electrical connection to manufacturers recommendation.

3.4 BLACKOUT BLINDS

Supply & install motorised blackout blinds as indicated on Smith Madden Group DWGProduct/Finish: As per SMG schedules.

All trades are to work in accordance with current relevant State Regulations,industry agreements and codes.Include messing facilities for all trades for duration of project.Maintain a site register of all equipment and personnel working on the siteProvide a full time first aid officer (minimum Level 2first aid qualification) for duration of project.Final clean on completion to include perimeter glazing, toilets and core area - as applicable.Coordination of smoke detector isolation/reinstatement for all trades when required.Coordination of access for all trades on site.

5.0 HYDRAULICSCoordination of subtrades on site (coordination fee to be negotiated with successful headcontractor).NO SMOKING on siteGeneral Adherence to Tenancy Guidelines/Fitout Rules

The hydraulic services contractor shall co-ordinate with the builder, mechanical, electricaland fire sprinkler services contractors.

5.1 GENERAL

All work shall be carried out to AS3500 and the regulations and requirements of allauthorities having jurisdiction over any part of the works.

New sewer drains, wastes and vents shall be UPVC SWV grade to AS3500. Waste pipe tobe clipped at 500mm centres as per hot waste and discharge requirements and provisionfor expansion to be made.

Hot and cold water service shall be copper tube type B to AS3500

Allow for all Jump-Ups, Risers, Altering Pipes, Inspection Openings fittings as required byAS3500.

Fix piping hard against underside of slab using minimum gradients to maximise ceilingspace height.

Install approved fire collars where plastic piping passes through fire rated floors andwalls.

All hot water piping to be fully thermally insulated.

All penetrations through wall and floor slabs by hydraulics contractor.

All exposed pipes and tundishes to be chrome.

Refer to architectural schedules for tap and fixture types and details.

5.2 PLUMBING & DRAINAGE WORKS

Supply and installation of plumbing inclusive of hot and cold water supply, associatedpipework and wastes.

5.3 HOT WATER SERVICES

Supply and install of Hot Water Unit.Refer Appliances Schedule

5.4 BOILING/CHILLED WATER UNIT

Supply and install Boiling/Chilled Water Unit as per Smith Madden Group.

5.5 FIXTURES/FITTINGS

Supply and installation of fixtures as listed on the Appliances Schedule

5.6 WHITEGOODS

Supply and installation of dishwasher as listed on the Appliance Schedule

5.7 CUT & SEAL

Cut and seal of existing hydraulic services (existing surfaces to be made good).

6.7 SEPARATE SWITCHING

Separate switching to be provided as indicated on the Smith Madden Group/Engineers DWG.

6.8 EXIT/EMERGENCY

Exit and Emergency lighting to be provided in accordance with statutory requirements.

6.9 SUBMETERING OF ELECTRICAL APPLIANCES

Submetering of power to be supplied as required. Allow for coordination with building ownerrepresentative and power supply authority.

6.10 INSTALLATION OF ELECTRICAL APPLIANCES

Installation of the following electrical appliances/whitegoods as per the appliance schedule.

6.11 CABLING/OUTLETS

Supply/installation of electrical outlets as noted - Refer to Smith Madden Group/EngineersDWG.Allow single phase cabling unless otherwise noted.

6.12 DEDICATED POWER

Dedicated power to be provided as identified on therelevant Smith Madden Group/Engineers DWG & schedule.

6.13 UPS

Supply and connection to UPS as required.

6.14 HARD/SOFT WIRING

Workstations to be wired as per notations on the relevant Smith Madden Group/EngineersDWG.

6.15 TESTING/AS-BUILT CERTIFICATION

Allow to test and tag all electrical leads/equipment being used on site for all trades forduration of projectAllow to provide temporary power board/s for duration of project including earth leakageprotection.Allow to label all GPOs.

7.1 DEMOLITION

As required to make safe

7.2 CABLING/OUTLETS - DATA & VOICE

Supply/installation of data and voice cabling/outlets as noted. Refer to Smith Madden GroupDWGCabling type - CAT6 unless otherwise noted.Data termination type - RJ45 unless otherwise noted.Voice termination type - RJ45.Fibre Optic Cabling as per standards

7.3 COMMUNICATIONS RACK

Supply/installation of cabling outlets. Refer to Smith ‘Madden Group /Engineers DWG

7.4 COMPUTER ROOM

Supply/installation of cabling outlets. Refer to Smith ‘Madden Group/Engineers DWG

7.5 FLYLEADS & PATCH LEADS

Allow for Flyleads at one metre in length as requiredAllow for patch leads at one metre in length as requiredAllow to patch from rack to panels

Supply and install security as noted.

8.1 SUPPLY & INSTALLATION

Electronic security to match and link to existing, refer to Door Schedule. Head contractor toprovide supports/fixing of electronic fixtures as required. Testing, labelling andcommissioning of system on completion.

8.0 ELECTRICAL SECURITY

9.0 FIRE SERVICES9.1 DEMOLITION

Adjust fire detection/suppression system to suit demolition of existing partitions.

9.2 SPRINKLERS

Refer to SMG DWG for reference and notes.· The fire services contractor shall co-ordinate with the builder, mechanical,hydraulic and electrical services contractors.· This drawing represents an existing sprinkler head layout and therefore doesnot indicate proposed layout for pipework routes, bends, offsets, etc. Which shall beincluded by the fire services contractor at the time of tender· All new sprinkler heads shall match existing heads used in the tenancy on thisfloor, except for new flush mounted type where shown.· The contractor shall check the location of all in ceiling sprinkler heads andadvise of any discrepancies.· The contractor shall allow for the supply and installation of extra on ceilingsprinkler heads as required.

9.3 MODIFICATION TO EXISTING FIRE SERVICES

· All works shall be in accordance with as 2118 and certifiers requirements forordinary hazard classification.

9.4 FIRE HOSE REELS, HYDRANTS, EXTINGUISHERS

Existing sprinkler heads if required to be deleted are to be reused where new sprinklerheads are required where suitableRefer to Smith Madden Group/Engineers DWG for reference and notes.Supply and install equipment as indicated in Smith Madden Group/Engineers drawings

9.5 FLUSH MOUNTED SPRINKLER HEADS

Supply and install sprinklers to flush plasterboard area as indicated on drawings

9.6 SMOKE DETECTORS

Supply and install and modify smoke detectors in accordance to Australian Standardsand Certifiers.Testing and commissioning of system on completion.

2.0 FLOOR FINISHES 4.0 OTHER BUILDING WORKS

6.0 ELECTRICAL, LIGHTING & POWER

The electrical contractor shall co-ordinate with the Builder, Mechanical Hydraulic and FireProtection Service contractors.

Reuse existing fittings where shown on floor plans or to be deleted where suitable.

All redundant equipment and wiring shall be removed. Notify consultant and seekinstruction in case where demolition works affect existing equipment and cabling to bereused.

The contractor shall make an allowance in tender to locate fittings to suit new andexisting services in ceiling space.

Refer to architectural reflected ceiling drawings for all downlight setouts on newplasterboard ceiling areas.

Supply and install EWIS speakers in accordance with AS 2220. Speakers shall be flushmounted on ceiling.

6.1 DEMOLITION

As required to make safe.

6.2 RELOCATION

Relocation of existing typical light fittings to suit partition layout. Refer to relevant SmithMadden Group DWG.

6.3 TYPICAL LIGHTS

Supply/Installation of selected typical light fittings to suit partition layout. Refer torelevant Smith Madden Group DWG.

6.4 DOWNLIGHTS

Supply/installation of selected low voltage downlights to areas as noted.

Supply/installation of dimmers to downlights within all meeting rooms - Refer to SmithMadden Group/Engineers DWG & schedule.schedule.

6.5 FEATURE LIGHTS

Supply/installation of selected feature lighting as indicated. Refer to Smith Madden GroupEngineers & schedule.

6.6 BANK SWITCHING

Bank switching to be located as indicated on Smith Madden Group/Engineers DWG.

6.0 ELECTRICAL, LIGHTING & POWER

7.0 ELECTRICAL COMMUNICATIONS

10.0 MECHANICAL

14.0 SIGNAGE

10.0 MECHANICAL

· Mechanical contractors shall coordinate with existing ceiling space services.· The contractor shall check the location of all in ceiling ductwork andequipment and advise of any discrepancies.· Make allowance in tender for any discrepancies for diffusers to be located onnearest ceiling tile where ceiling space obstructions prevent diffuser be located onceiling tile as shown on the ceiling plan.· The mechanical services contractors shall co-ordinate with the builder, FireSprinkler, Hydraulics and Electrical Services contractors.

· All penetrations, holes and damage in existing surfaces which are to remainshall be made good. Refer to architectural drawings and specification for details offinishes and quality of work.· All ductwork to be installed in ceiling space unless noted otherwise.

10.1 MODIFICATION TO EXISTING MECHANICAL SERVICES

Modification of existing supply air/return air outlets to suit revised partition layout.Refer to Smith Madden Group /Engineers DWG.

10.2 NEW MECHANICAL SERVICES

Refer to Smith Madden Group/Engineers DWGS

10.2.1 LINEAL SLOT DIFFUSERS

Supply/installation of linear slot diffusers to flush plaster ceiling as required. Refer toSmith Madden Group/Engineers DWG.

10.3 EXHAUST SYSTEM

Supply/installation of exhaust systems as noted. Refer to Smith Madden Group/Engineer DWG

10.4 SUPPLEMENTARY AIR CONDITIONER

NOTE THIS COSTING IS TO BE SHOWN SEPARATELY

Allow to supply and install to the areas as identified on the Smith MaddenGroup/Engineer Dwgs

Provide detail on proposal (eg. Area required type of unit, operation of unit.

10.5 AIR TRANSFER GRILLES

As requiredPreference is to not have air relief grilles located in doors (undercut doors ifnecessary).

Balance and commission of system on completion.

11.0 SCREENS & SYSTEM FURNITURE

Supply/install the workstation system as identified in Smith Madden Group DWG andWorkstation Schedule.

11.1 WORKSTATION SYSTEM

Refer to Workstation Schedule for worktop finish, screen height and storagerequirements and accessories.

11.2 GPO KITS

Location on screens - Refer to Smith Madden Group DWG.Wiring as per Smith Madden Group workstation schedule.

Allow for data / voice cutouts, (GPO kits to be supplied cabled by cabling contractor).Refer to Smith Madden Group DWG.Supply/install cable tidies where required.Supply and install power blades between workstation screen and ceiling. Refer toSmith Madden Group DWG.

11.3 RELOCATION OR RECONFIGURATION OF EXISTING

Relocation/reconfiguration of existing workstations on/off site as required. Allow fornew components as required to make up new workstation layout.

Refer to Smith Madden Group DWG.

Signs - design and use to AS 2342Public information signs - to AS 2899Safety signs - design and use to AS 1319Aluminium Plate for engraving: Alloy & temper designation 6063-0For casting: To AS 1874Stainless SteelSurface finish designation 4 (general purpose polished)PlasticsUPVC sheet: Semi-rigid sheet to AS 2324Rigid cellular polystyrene: To AS 1366.3 class VH for cut-out shapes

14.1 RELOCATION OF EXISTING SIGNAGE

Relocate as per Smith Madden Group instruction.

14.2 SIGNAGE TO RECEPTION

Refer to Smith Madden Group DWG.

12.0 JOINERY

Refer to Joinery Cover Sheet.

13.0 LOOSE FURNITURE & STORAGE

Relocation/reconfiguration of existing joinery on site as required.

Generally supply and install loose items & storage units as shown on Smith MaddenGroup DWG & Loose Furniture Schedule.

15.0 WHITEGOODS & APPLIANCES

Supply whitegoods as nominated in the Appliances Schedule.

16.0 LIFT CARS

Construction as per AS1735.


AGLADSTONE REGIONAL COUNCIL

JCTN

RR

400597


GENERAL NOTES & SPECIFICATIONS TENDERRev. Date Chk Description

A 23.11.12 TENDER

UP

UP

UPDN

EXISTING PARTITION TO BE DEMOLISHED

NEW PLASTERBOARD PARTITION

EXISTING CORE WALLS & PARTITIONS TO REMAIN

PARTITION LEGEND

RETAIN EXISTINGFLOOR MAT

NOT IN SCOPE

DEMOLITION NOTES

1. DEMOLISH ALL WALLS,FLOORS,CEILINGS &FIXTURES AND MAKE GOOD AS REQUIREDREADY FOR NEW FITOUT.

2. ALL EXISTING BASE BUILD WALLS HAVETEXTURED STIPPLE FINISH, MAKE GOOD TOMATCH ADJACENT WALL FINISH.

3. TENDERER MUST VISIT SITE DURING TENDERPERIOD AS THERE ARE VARYING FLOORFINISHES WITHIN TENANCY.

Contractors must verify all dimensionson site, and notify Smith MaddenGroup of any discrepencies prior tocarrying out any works. Writtendimensions take precedence overscaled dimensions.



Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


1 : 100

BGLADSTONE REGIONAL COUNCIL

JCTN

RR

400597

A02113 GOONDOON STREET, GLADSTONE03.09.12

EXISTING CONDITIONS AND DEMOLITION PLAN TENDER

1 : 100A021 GROUND FLOOR_EXISTING & DEMO PLAN

1 : 100A022 FIRST FLOOR_EXISTING & DEMO PLAN

0 5 10 m 1 : 100LOCATION

Revision Date AmendmentsA 23.11.12 TENDER

B 02.1.12 TENDER - DEMOLITION STAGING A02.01 ADDED

IMPORTANT ! - REFER TO DRAWING DEMOLITION STAGING PLAN

B

UP

UP

UP

UP

UP

UP

DN

DN



NOT IN SCOPE

NOT IN SCOPE




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


1 : 100


JCTN

RR

400597


DEMOLITION STAGING PLAN TENDERRevision Date Amendments

A 02.1.12 TENDER - DEMOLITION STAGING A02.01 ADDED

1 : 100A02.011 GROUND FLOOR_EXISTING & DEMO STAGE 1

1 : 100A02.012 GROUND FLOOR_EXISTING & DEMO STAGE 2

1 : 100A02.013 FIRST FLOOR_EXISTING & DEMO STAGE 1

1 : 100A02.014 FIRST FLOOR_EXISTING & DEMO STAGE 2

0 5 10 m

NOTE - NO ADDITIONAL STAGE 2 FIRST FLOOR DEMOLITION

B B B

RB RB RB

SB SB SB

VB VB VB

HB HB HB

UP

UP

UPDN

EXISTING PARTITION TO BE DEMOLISHED

NEW PLASTERBOARD PARTITION

EXISTING CORE WALLS & PARTITIONS TO REMAIN

PARTITION LEGEND

INDICATES BLOCK OUT BLINDS

INDICATES EXTENT OF WORKS

INDICATES ROLLER BLINDS

INDICATES SLIM BLINDS

INDICATES VERTICAL BLINDS

GENERAL LEGEND

INDICATES HORIZONTAL BLINDS

DENOTES ROOM OR AREA NUMBER

DENOTES FLOOR FINISH

DENOTES NEW DOOR NUMBER

DENOTES EXISTING DOOR NUMBER

DENOTES JOINERY NUMBER

DENOTES CEILING HEIGHT

DENOTES WORKSTATION NUMBER

DENOTES WALL TYPE

DENOTES SCREEN TYPE & FABRIC FINISH

DENOTES JOINERY/WALL FINISHES

DENOTES ALIGNMENT

NOTE: LEGEND TO BE READ IN CONJUNCTION WITH SCHEDULES.

J01

A WS01

?

S1

ALIGN

L1

101

CA01

D01

EXD01

CH2700

BREAKOUT

STORE

PRINT

S/B ELEC

FHR

2HR FIRERATED

ENTR

Y BO

ARD

/IN

TER

CO

M

ART

INST

ALLA

TIO

N

LARGE MEETINGG.03

OFFICE 3G.05

KITC

HEN

ETTE

G.0

7

PWDG.10

FWCG.09

MWCG.08

QUIET RMG.11

CLIENT MEETINGG.13

CLIENT MEETG.14

CUSTOMER WAITINGG.15

STOREG.17COMPACTUS

G.24

OFFICE 7G.23

OFFICE 5G.21

OFFICE 4G.20COMMS

G.25

FHR

AMBULANT

AMBULANT

QUIET RMG.19

HOT DESKS

SMALL MEETINGG.04

109LOADINGBAY

OFFICE 1G.01

OFFICE 2G.02 C2

C2

C2

C2

C2

C2

C3

C3

C3

C3

C3

C3

C3

C3

C3

C3

C3

C3

C3

C3

C3

C3

C6C6ST1

T3

C5T4

C5

C2

C1C1

ST2 ST2 ST2 ST2 ST2

ST2 ST2 ST2 ST2 ST2

ST2

ST1

ST1ST1

C2

ST1

C2

C2

C2

ST1

ST1ST1

C2

C2

C2

C2

C2

C2

ST3

C2

ST3

C2

ST3

C2

ST3

C2

ST3

C2

ST3

C2

ST3

C2

ST3

ST1ST1

ST1ST1

C2

ST3

C2

ST3

C2

ST3

C2

ST3

C2

ST3

C2

ST3

C2

ST3

C2

ST1

C2

C2

C2

C2

ST1

ST1ST1

C2C2

C2

C2C2

C2

C2

C2

C2

C2

C2

C2

C2C2

C2 C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

ST1

ST1

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

C2

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

ST1

T5

C7

C7

C7 C7

T5

C7

C7

C7

T3

C5

T3

C3C3C3C3

C3C3C3C3

ST1

C2 C2

C5

T5

C7

C7

C7

C7

C2C2

C2

C2

C2

C2

C6C6

C6 C6

C6 C6

C2

C1C1

C2

C1C1

C2

C1C1

C2

C1 C1

C2

C1C1

C2

C1 C1

OPEN OFFICEG.26

PRINT 1G.06

BREAKOUTG.12

STAFFG.16

OPEN OFFICEG.27

OPEN OFFICEG.28

BREAKOUTG.29 OPEN OFFICE

G.30

OPEN OFFICEG.31

T2

T2

WSC

WSCWSC WSC WSC

C2

WSD

T2

T4

T3

C4 C4

WSD

C4 C4

T1 T1 T1

T6T6T6T6

C2

ST3 ST3

ST4ST4ST4ST4ST4ST4ST4ST4ST4ST4ST4ST4ST4ST4ST4

C1C1C1

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3ST3

ST3

ST3ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3ST3

ST3 ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

ST3

C4

C4

C1C1

ST3

T5

T5

C4

1A09.01

WSE WSE

ST2 ST2 ST2ST2 ST2 ST2 ST2 ST2

ST2

ST2ST2ST2ST2ST2

FHR

ST1 ST1

ST1

ST1

ST1

ST1

OFFICE 6G.22

COMMS ROOM

2765 COS

CO

MM

S R

OO

M

3073

CO

S

PRINT 2G.18

C8

LUNCH ROOM1.03

WC

WC MALE TOILET1.01

FEMALE TOILET1.02

SHOWER

UR

NIN

ALS

SHOWER

NOT IN SCOPE

C7

C7C7

C7 C7

C7C7

C7

C4

T3

T5 T5

C7

C7C7

C7

T5C7

C7C7

C7

T5

C3 C3 C3

C3C3C3

C5

C4

T2

1A09.02

Sim4

A09.03




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


1 : 100


JCTN

RR

400597


PROPOSED FLOOR PLAN TENDER

1 : 100A031 PROPOSED FLOOR PLAN

1 : 100A032 FIRST FLOOR PROPOSED PLAN

0 5 10 m

1 : 100A033 FIRST FLOOR REAR TOILETS PROPOSED PLAN


UP

UP

UP

DN

THIS AREA TOHAVE NOOBSTRUCTIONS

IN ACCORDANCE WITHAS 1428.1 - 2009

FOR

CLE

ARAN

CE

RE

FER

TO

DW

G A

10

FOR CLEARANCEREFER TO DWG A10

FACE OF DOOR

WHERE DOUBLEDOORS ARE USED,THE 850MM MINIMUMCLEAR OPENINGSHALL APPLY TO THEACTIVE LEAF

920

850 MM MIN. CLEAR OPENINGFOR CLEARANCE

REFER TO DWG A10

FOR

CLE

ARAN

CE

RE

FER

TO

DW

G A

10

THIS AREA TOHAVE NOOBSTRUCTIONS

920 MIN DOOR WIDTHREFER DOOR SCHEDULE FOR

DOOR WIDTH

OFF CENTRE LINEOF CEILING GRID

CENTRE LINEOF CEILING GRID

WINDOW MULLION

SETOUT REFERENCES

SETOUT OF PARTITION TO BE CENTRE LINE OFCEILING GRID OR CENTRE OF TILE OR CENTRE OFWINDOW MULLIONS EXCEPT WHERE OTHERWISEDIMENSIONED OR REFERRED TO A DETAIL.

1898 3090 3090 6073 3628 3077 2972 3653 2800 1720 2485 3309 5500

3945

4525 CO

S

4285

3045 3090 3090 3090

3645

943

D04 D05

D01

D07

D08

D09

D10

D12D13 D14

EX

D23 D22 D21 D20D24

EX

EX

EX

EXEXEX

D12

EX

P1

P1

P1

P1

P1

P1

P1 P1

P1

P1

P1

P1

G1

P1

G1 G1 G1

P1

P1

P1P1

P1

P1

ALIGN

ALIGN

ALIG

N

LARGE MEETINGG.03

OPEN OFFICEG.26

OFFICE 3G.05

KITC

HEN

ETTE

G.0

7

PWDG.10

FWCG.09

MWCG.08

QUIET RMG.11

CLIENT MEETINGG.13

CLIENT MEETG.14


STOREG.17

COMPACTUSG.24

OFFICE 7G.23

OFFICE 5G.21

OFFICE 4G.20

COMMSG.25

D02 D03

ALIGN ALIGN ALIGN

D06

D11

D16

D17

OFFICE 1G.01

OFFICE 2G.02

SMALL MEETINGG.04

PRINT 1G.06

P2

9159

EX

P1 P1

G1 G1 G1

110 110

OPE

RAB

LE W

ALL

140 110 110

P1

P1

440

400

110

110

110G1 G1 G1 G1 P1

P1

G1

P1

QU

IET

RO

OM

2545

110600

G1 P1P1 G1

600

110 110

600

G1

ALIGN

ALI

GN

110

P1

QUIET RMG.19

BREAKOUTG.12

STAFFG.16

OPEN OFFICEG.27

OPEN OFFICEG.28

BREAKOUTG.29

OPEN OFFICEG.30

OPEN OFFICEG.31

G1

P1

P1

P1

*

ALLOW SUITABLEDEPTH FOR FHR

*

ALLOW SUITABLEDEPTH FOR FHR

ALIGN ALIGN

P4

ALIGN WITH BULKHEAD

D30

EX EX

D29

D32

740

110

CO

S

1075

FHR

COS

3550

1740

1900

CLR900

CLR900

350

ALIGN EX

OFFICE 6G.22

2995

D19

COS

2765

2995

1000 P1

P1

110

P1

G1

1785

CO

S

1290

SUITABLEDEPTH FOR FHR

D25 D26D27

EX

EXEX

EX EX

EX

EX

ALIGNALIGN

1445 1935ALIGN

WC

WC

FEMALE TOILET1.02

SHOWER

MEETING/PING PONG ROOM

MALE TOILET1.01

UR

NIN

ALS

SHOWER

LUNCH ROOM1.03

NOT IN SCOPE

P3

P3

P3

P3

D28

130

CO

S

2655

110

ALLOW FOR PROPRIETARY WATERPROOF MEMBRANE TO WALLS &FLOOR OF SHOWERS

905




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


As indicated


JCTN

RR

400597


SETOUT PLAN TENDER

1 : 20DOOR CLEARANCE - SWING DOOR

1 : 100A041 GROUND FLOOR_SETOUT PLAN

1 : 100A042 FIRST FLOOR_SETOUT PLAN

PARTITION LEGENDTYPE DESCRIPTION HEIGHT MATERIAL FRAMING COMMENT 1 COMMENT 2 COMMENT 3 INSULATION SKIRTING NOTE

G1 FULL HEIGHT GLAZEDPARTITION WALL TO AS 1288

FROM F.F.L. TO UNDERSIDE OFSUSPENDED CEILING

10.38mm lAMINATEDCLEAR GLASS

SELECTEDALUMINIUMFRAMES

REFER TOSCHEDULES FORFINISH TOALUMINIUMFRAMES

REFERELEVATIONS FORDETAILS

N/A N/A

P1 FULL HEIGHTPLASTERBOARD PARTITION


1x13mm GYPSUMPLASTERBOARD EACHSIDE

64mm STEELSTUDS @ 600mmCTRS

STAGGER JOINTSEACH SIDE. TAPE& SET FINISH

50mm ACOUSTICINSULATIONBATTS WITHINWALL

100m ALUMINIUM

P2 FULL HEIGHT 2 HOUR FIRERATED PLASTERBOARDPARTITION


2x13mm CSR FYRCHEKPLASTERBOARD EACHSIDE



FOLLOW CSR GUDELINES TOACHIEVE FRL


100m ALUMINIUM

P3 FULL HEIGHT FIBRE CEMENTPARTITION


1x FIBRE CEMENTSHEET EACH SIDE




100m ALUMINIUM

P4 LOW HEIGHTPLASTERBOARD WALL

FROM F.F.L. TO 1200 AFL 1x13mm GYPSUMPLASTERBOARDVISIBLE SIDE

TO SUIT 200mmWIDE


N/A 100m ALUMINIUM

P6 BULKHEAD FROM F.F.L. TO UNDERSIDE OFSLAB

1x13mm GYPSUMPLASTERBOARDVISIBLE SIDE


- 50mm ACOUSTICINSULATIONBATTS WITHINWALL

N/A

0 5 10 m


CH3000

CH3600

CH3000

CH2700

CH2700

SET PLASTERBOARD FACE TO ALL BULKHEADS

LARGE MEETINGG.03

OPE

N O

FFIC

EG

.26

OFFICE 3G.05

KITCHENETTEG.07 PWD

G.10

FWCG.09

MWCG.08 QUIET RM

G.11

CLIENT MEETINGG.13

CLIENT MEETG.14


STOREG.17

COMPACTUSG.24

OFFICE 7G.23

OFFICE 5G.21

OFFICE 4G.20

COMMSG.25 QUIET RM

G.19

SMALL MEETINGG.04

OFFICE 1G.01

OFFICE 2G.02

PRINT 1G.06

BREAKOUTG.12

STAFFG.16

OPEN OFFICEG.27

OPEN OFFICEG.28

BREAKOUTG.29

OPEN OFFICEG.30

OPEN OFFICEG.31

OFFICE 6G.22

EXISTING CEILING TO REMAINALLOW TO PATCH & PAINT TONEW PARTITION ANDLIGHTING LAYOUT

NOT IN SCOPE

LUNCH ROOM1.03

WC

WCMALE TOILET

1.01

FEMALE TOILET1.02

SHOWER

SHOWER

ACOUSTIC BAFFLES IN CEILING SPACE




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


1 : 100


JCTN

RR

400597


REFLECTED CEILING PLAN TENDER

1 : 100A051 GROUND FLOOR_REFLECTED CEILING PLAN

1 : 100A052 FIRST FLOOR_REFLECTED CEILING PLAN

0 5 10 m


UP

UP

UPDN

FINISHES NOTES

ALL NEW & EXISTING WALLS & COLUMNS WITHIN THE TENANCYTO BE PT1 UNLESS OTHERWISE NOTED.

ALL NEW & EXISTING DOORS TO BE PAINTED.

ALL NEW WALLS TO HAVE 100MM ANODISED ALUMINIUM SKIRTING.

ALUMINIUM ANGLE TO ALL CHANGES IN FLOOR FINISHES.

LARGE MEETINGG.03

OPEN OFFICEG.26

OFFICE 3G.05

KITCHENETTEG.07

PWDG.10

FWCG.09

MWCG.08 QUIET RM

G.11

CLIENT MEETINGG.13

CLIENT MEETG.14


STOREG.17

COMPACTUSG.24

OFFICE 7G.23

OFFICE 5G.21

OFFICE 4G.20

COMMSG.25

V1

FT1

V1


ALL STEPS TO HAVE NEWTREDSAFE NOSING

V1

PT2

A091

QUIET RMG.19

SMALL MEETINGG.04

OFFICE 1G.01

OFFICE 2G.02

PRINT 1G.06

BREAKOUTG.12

STAFFG.16

OPEN OFFICEG.27

OPEN OFFICEG.28

BREAKOUTG.29

OPEN OFFICEG.30

OPEN OFFICEG.31

A094

A09

3

EXTENT OF PT2

PATCH & PAINT EXISTINGSHOP FRONT ROOM

OUTSIDE RL 19.901INSIDE RL 19.921ALLOW TO SCREEDCORRIDOR TO LEVELTHE FLOOR

OFFICE 6G.22

V1

V1

EXISTING FLOOR TO REMAIN EXISTING FLOOR

TO REMAIN

REFER TO DRAWING FEATURECARPET PLAN A06.01 AND PAGE 26FINISHES SCHEDULE FOR CARPETTILE DETAILS

WC

WC

FEMALE TOILET1.02

SHOWER


MALE TOILET1.01

UR

NIN

ALS

SHOWER

LUNCH ROOM1.03

NOT IN SCOPE

FT1

V1

V1



A09

5

6 REFER TO DRAWINGFEATURE CARPET PLANA06.01 AND PAGE 26FINISHES SCHEDULE FORCARPET TILE DETAILS

CARPET

ALUMINIUM ANGLERAMP UP TO LEVEL

TO ENSURE FLUSH FLOOR LEVEL

VINYL TILECARPET / VINYL

ALUMINIUM ANGLERAMP UP TO LEVELTO ENSURE FLUSH FLOOR LEVEL




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


As indicated


JCTN

RR

400597


FINISHES PLAN TENDER

1 : 100A061 GROUND FLOOR_FINISHES PLAN

1 : 100A062 FIRST FLOOR_FINISHES PLAN

1 : 2A063 CARPET TO VINYL TRANSITION

1 : 2A064 CARPET/VINYL TO TILE TRANSITION

0 5 10 m


NOTE 1 - THIS DRAWING MUST BE PRINTED IN FULLCOLOUR TO BE CORRECTLY COMPREHENDED

NOTE 2 - REFER TO FINISHES SCHEDULE FOR MOREINFORMATION




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


As indicated


JCTN

RR

400597


FEATURE CARPET PLAN TENDER

NOT TO SCALEA06.011 FEATURE CARPET PLAN

DO NOT SCALE


UP

UP

UP

LARGE MEETINGG.03

OPEN OFFICEG.26

OFFICE 3G.05

KITCHENETTEG.07

PWDG.10

FWCG.09

MWCG.08

QUIET RMG.11 CLIENT MEETING

G.13

CLIENT MEETG.14


STOREG.17

COMPACTUSG.24

OFFICE 7G.23

OFFICE 5G.21

OFFICE 4G.20

COMMSG.25

WSA

WSA

WSA

WSA WSA

WSA

WSA

WSA WSA

WSA

WSA WSA

WSA

WSA

WSA

WSA

WSA

WSA

WSB WSB

WSB

WSB

WSB WSB

WSB

WSB

WSB WSB

WSB

WSB

WSB

WSB

WSB WSB

WSA

WSA

WSA WSB

WSB

WSB

WSB WSB

WSB

WSB

WSBWSA

WSA

WSA

WSB WSB

WSB

WSB WSB

WSB

WSB

WSB

WSB

WSB WSB

WSB

WSB

WSB

QUIET RMG.19

SMALL MEETINGG.04

OFFICE 1G.01

OFFICE 2G.02

PRINT 1G.06

BREAKOUTG.12

STAFFG.16

OPEN OFFICEG.27

OPEN OFFICEG.28

BREAKOUTG.29

OPEN OFFICEG.30

OPEN OFFICEG.31

1582 2467

23002300 2300 2300

DESKINFILL

WSB

WSD

WSE WSE

WSCWSC

DESKINFILL

DESKINFILL

DESKINFILL

COS

2395

WSC WSCWSC WSC

WSC

OFFICE 6G.22

WSD

COS

2995

1050

1860

ALIGN ALIGN

1750

1750

1750

1750

1585

1585

130017

15

1915

1800

750

WORKSTATION TYPE WSA

2100

750

WORKSTATION TYPE WSB

750

WORKSTATION TYPE WSC

750

2100

1800

COS - TO FIT WITHIN ROOM

2395 TO 2995

600

WORKSTATION TYPE WSD

3000

750

WORKSTATION TYPE WSE




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


As indicated


JCTN

RR

400597


WORKSTATION PLAN & DETAILS TENDER

1 : 100A071 GROUND FLOOR_WORKSTATION PLAN

0 5 10 m

WORKSTATIONCOUNT

NO. QTY

WSA 25WSB 39WSC 7WSD 2WSE 2

1 : 50A072 WORKSTATION LEGEND


JOINERY NOTES

FINISHES NOTES & SCHEDULE

Site conditions and dimensions to be verified by the contractor prior tocommencement of works. Discrepancies to be reported to Smith Maddenrepresentative for verification.

Manufacture and install all joinery items as shown on Smith Madden Group DWG.

Contractor should refer to Smith Madden Group Drawings to determine relevant joineryreference number and hence locate relevant joinery and detail drawings.Refer to Joinery Schedule and Finishes ScheduleContracter to produce shop drawings, where indicated in journey schedule for SMGapproval.

TIMBER FIXTURES

Joinery timberSeasoned hardwood: To AS 2796Radiata pine: To AS 1493 or AS 1497, as applicableCypress pine: To AS 1810Australian grown conifers, other than radiata pine and cypress pine: To AS 1786PlywoodInterior use generally: To AS 2270Interior use exposed to moisture: To AS 2271ParticleboardStandard: To AS/NZS 1859.1Grade: High moisture resistance (HMR) grade

Melamine overlaid particleboard overlaid on both sides with low pressure melamine.Medium density fibreboard (MDF)Standard: To AS/NZS 1859.3Grade: High moisture resistance (HMR) gradeMelamine overlaid medium density fibreboard: medium density fibreboard overlaid onboth sides with low pressure melamine.Decorative overlaysStandard: To AS/NZS 1859.3Decorative laminated sheetsStandard: To AS 2924Type: High pressure laminateThickness (minimum):

· For horizontal surfaces fixed to a continuous background: 1.2mm· For vertical surfaces fixed to a continuous background: 0.8mm· For posted formes laminate fixed to a continuous background:.8mm· For vertical surfaces fixed intermittently (eg to studs): 3.0mm· For edge strops: 0.4mm

TIMBER VENEER

Important: the same Batch number is required for all joinery, loose furniture,workstations, timber panelling manufactured and installed

Designer to insert following information(Supplier; species; cut; Crown/quarter/quarter true, rotary, birdseye, /burls, quilted,figured, flame; Veneer to be book matched unless specified otherwise; Slipmatching/reverse slip matching/special; Finish - 2 Pak clear polyurethane (2 coatsminimum); Satin/semi gloss/full gloss.

MetalAL1: Anodised Aluminium - xxxxxxxPC1: Powdercoated Aluminium - xxxxxxxxMS: Mild SteelB.S.S: Brushed/Linished Stainless SteelP.S.S: Polished Stainless SteelC.P: Chrome Plated

Special SurfacesResin surface (satin, semi gloss, full gloss) xxxx

Painted Surfaces2 Pak polyurethane Paint Finish (Satin/semi gloss/full gloss)

CODESJOINERY INDEX

Benchtops / Built in Worktops/ TablesNominal finished thickness to all benchtops unless noted otherwise shall be35 mm.All benchtops are to be hand laminated / veneered as specified

Approved surface laminates:Laminex premium grade 1.1mm thick nominal laminate shall be used on allsurfaces unless noted otherwise.

Laminex Redback grade, 8mm thick laminate to be used for all post formedbench tops only.

Laminex Antistatic Redback laminate to be used on all I.T. tech andcomputer room bench /work tops only.

Veneers where specified shall be from supplier nominated and shall beconfirmed from same log batch unless agreed otherwise with Designer

Approved substrates:-32mm thick water resistant board to be used in all wet areas

(kitchen, tearooms, vanities etc)-33 mm thick HMR Particle Board-32 mm thick MR Craftwood

Underside of bench tops to be hand laminated/ veneered to extent ofprojection of bench top from face of internal carcases. Worktops to belaminated / veneered to full underside of top.

Tea bench: provide silicone seal to all junctions between joinery andwalls/floor. Colour to match laminate.

Doors, Carcases, panels and KickboardsExposed Slab ends: 33mm thick nom. (refer to drawings)Carcases: 18mm thick nom.Adjustable Shelves: 18mm thick nom. spanning to 900mm

25mm thick nom. spanning over 900mm - maximum of1000mm overall

Doors: 18mm thick nom. for all under bench and overheadCupboards

25mm thick nom. for all full height doors

Approved materials:Laminex prelaminated Structural MR / Laminex Vertiboard MR (carcases only)Laminex particleboard & Craftwood where veneer surface finish specified.18mm thick water resistant bosrd to be used for cupboards in all wet areas(kitchens, tearooms, vanities etc)

Scribbers: All built in joinery shall be scribbed to adjacent walls. Joiner to ensurewidth of scribbers is suitable for specified handles. Plumb and level all units andinstall adjustable feet where required.

Drawer Runners: Full extension bull bearing type - Hafele or similar approved (tobe nominated with tender).

Adjustable shelf supports: All shelves to be supported on approved nickel-platedspoon shaped supports and sleeves at 32mm increments to full height of carcasesstarting 100mm from top and bottom of carcase interiors.Hinges: Concealed type Salici or similar approved (to be nominated with tender).

Connectors: No exposed fixings allowable. All carcases to be fitted with press fitcolour matched trim caps to connectors.

Overhead units: Ensure fixings for overhead units are secured throughplasterboard into studwork. Plasterboard fixings only will not be accepted.

Hanging rails:25mm tubular rails (chrome finish) with support for long lengths

Sliding Tracks: xxxxxxxxxxx

Worktop/benchtops: Finished height of all worktops and benchtops to be amaximum +/- 10mm of specified height when existing floor conditions are takeninto account.

Grommets: Xxxxxxxxxxx

Edgestrips:Rigid 2mm thick ABS edge - colour to match benchtopPremium grade laminate edge - colour to match benchtop

Trims2mm nominal thick. Finished natural anodised trim to edge of tiles. Face of trim tobe flush with tile surfaceAll resin surfaces to have mitre joints unless specified otherwise

Electrical outlets: refer to joinery details for location of electrical outlets whereapplicable

Item

BinBlinds CarpetChairClockCoat HooksCutlery TrayDesk - ProprietaryDesk - Joinery (no screens)DishwasherDoorRangehoodExistingFabric or UpholsteryFilmFinished Ceiling level Finished Floor LevelFire Hose ReelFloor VinylFridge GlazingHandle -JoineryHandle - DoorHot water unitJoineryLaminateLight FittingMicrowavePedestal - MobileOperable Wall

Code

BEQCACFFFFFFDKJEQDEQEXUPFFCLFFLFHRFVEQGFFDEQJLFFEQMPEQ

Schedule

Loose FurnitureEquipmentFinishes

Loose FurnitureFittings & FixturesFittings & FixturesFittings & Fixtures

WorkstationJoinery

EquipmentDoor

EquipmentN/A

FinishesFinishes

N/AN/AN/A

FinishesEquipmentFinishes

Fittings & FixturesDoor Schedule

EquipmentJoineryFinishes

Fittings & FixturesEquipmentWorkstationEquipment

Item

OvenPaintPartitionPinboardPowdercoatProjectorProjector ScreenRangehoodReturnRugShowerSignageSink - Single Bowl/Double Bowl/basinSink MixerSkirtingSmartboardSplashback - GlassStoneStorageTable - Proprietary Table - JoineryTimber VeneerTowel RailTelevision Tiles - WallTiles - Floor includes MarbleWall Panelling - FeatureWhiteboard WorkstationWater Dispenser (Boiling, Chilled)

Code

EQPTPFFPCAVAVEQRTRGFFSGFFFFSKAVSBSSTTJTVFFAVWTFTJFFWSEQ

Schedule

EquipmentFinishes

N/AFittings & Fixtures

FinishesAudio VisualAudio VisualEquipmentWorkstation

FinishesFittings & Fixtures

SignageFittings & FixturesFittings & Fixtures

FinishesAudio Visual

FinishesFinishes

Loose FurnitureLoose Furniture

JoineryFinishes

Fittings & FixturesAudio Visual

FinishesFinishesJoinery

Fittings & FixturesWorkstationEquipment

GENERAL NOTES

JOINERY

Refer to finishes schedules.

JOINERY NOTES

Cabinetmaker is to fit appliances in liaison with Hydraulic and Electricalcontractors. Refer to equipment and Audio Visual schedule for details.

Joiner to produce shop drawings for all joinery for approval by designer prior tocommencement of works.

Joiner to check dimensions on site prior to commencement of works andrequest confirmation from Smith Madden representative if any queries. Do notscale from drawings.

Existing slab conditions to be checked by contractor and taken into account prior tomanufacture of all joinery items.

The associated drawings convey the designer’s intent regarding all visiblecomponents. Any structural or framing members are indicative only. Anyconcealed framing, fixing and under bench supports to be resolved bycontractor to ensure correct fixing, strength & structural stability. All fixingsto be concealed from normal viewing angles. All carcasses to be fitted withpress fit colour matched trim caps to fixing points.

Any variations to design intent depicted in associated drawings to be verified with SmithMadden group prior to manufacture of any work

All bench tops to be 33mm thick, finished in melamine with matching ABSedging (unless otherwise noted)

Joiner to make allowance to existing ducted skirting as indicated on drawing, and neatlycut joinery to suit as required.

All shelves to be supported on approved nickel plated spoon shaped supportsand sleeves at 32mm increments to full height of carcass starting at 100mmfrom top and bottom of carcass interiors.

All built - in joinery shall be scribed to adjacent walls. Plumb and level all units and installadjustable feet where required (unless otherwise noted)

Joints in bench tops and skirting are to line up with cupboard door lines where necessary.




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522



JCTN

RR

400597


JOINERY COVER SHEET TENDER

113 GOONDOON STREET, GLADSTONE

A08.01 JOINERY COVER SHEET AA08.02 JOINERY PLAN AA08.03 JOINERY DETAILS & ELEVATIONS AA08.04 JOINERY DETAILS & ELEVATIONS AA08.05 JOINERY DETAILS & ELEVATIONS AA08.06 JOINERY DETAILS & ELEVATIONS A

Rev. Date Chk DescriptionA 23.11.12 TENDER

UP

UP

UPDN

LARGE MEETINGG.03

OPEN OFFICEG.26

OFFICE 3G.05

KITC

HEN

ETTE

G.0

7

PWDG.10

FWCG.09

MWCG.08 QUIET RM

G.11

CLIENT MEETINGG.13

CLIENT MEETG.14


STOREG.17

COMPACTUSG.24

OFFICE 7G.23

OFFICE 5G.21

OFFICE 4G.20COMMS

G.25

1A08.06

4A08.03

1A08.04

3A08.06

1A08.03

Sim1

A08.04

1300 CLEAR

QUIET RMG.19

SMALL MEETINGG.04

OFFICE 1G.01

OFFICE 2G.02

PRINT 1G.06 BREAKOUT

G.12

STAFFG.16

OPEN OFFICEG.27

OPEN OFFICEG.28

BREAKOUTG.29

OPEN OFFICEG.30

OPEN OFFICEG.31

J03

J03

J01J05

J06

3200

2360

700

OFFICE 6G.22

1300 1695

J02

WC

WC

FEMALE TOILET1.02

SHOWER


MALE TOILET1.01

UR

NIN

ALS

SHOWER

LUNCH ROOM1.03

1A08.05

NOT IN SCOPE

J04




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


1 : 100


JCTN

RR

400597


JOINERY PLAN TENDER

1 : 100A08.021 GROUND FLOOR_FINISHES PLAN

1 : 100A08.022 FIRST FLOOR_JOINERY PLAN

0 5 10 m


A08.03

2

900

600

80 DIA CABLE DUCT

FFL-GL

0

L1

L1

10mm HIGH ROUTEDSLOTS TO FACE OFDOORS

900

900

4010

0

3A08.03

L1

FFL-GL

0

ADJ

ADJ

L1

A08.

03

5

TP1

700

400

SK1 TP1 SK1

COS

4480

COS

340

CO

S

329

FFL-GL

0

FCL-GL

2700

6A08.03

COS

4480

1100

OPEN

EQ EQ EQ EQ EQ

L5

L5 L5 L5

ADJ ADJ ADJ ADJ

SPLASHBACKL6

L5 L5 L5

L5

BIN

L2

L4

WALL MOUNTED ZIP BOILING WATER UNITTO BE POSITIONED OVER SINK DRAINER

ZIP CHILLEDWATER UNIT

100

L1

L5

BIN

ADJ ADJ ADJ

CUTLERY TRAY

ZIP

MIN

150

CO

S

773

L5

ADJ

578

TO SUIT FRIDGE

FR1

900

3560

0

NOTE - ALL HANDLESTO BE H1

1100

TP1 TP1

1109 1109 554 554 554

600

MIN

200

ADJ

FFL-GL

0

FCL-GL

2700

400

50

ADJ

TP1

L5

L4

L5

L6

L2

100

50

UNDERBENCH ZIPCHILLED WATER UNIT

ALLOW CUTOUT IN BASE OFCARCASS FOR VENTILATIONTO ZIP UNIT

35

20

900

600

1100

100

700

ADJ

30

NOTE:

JOINER TO CO-ORDINATE SIZE OF ALLWHITE GOODS WITH JOINERY CARCASS.




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


As indicated


JCTN

RR

400597


JOINERY DETAILS & ELEVATIONS TENDER

1 : 20A08.031 J01 PLAN

1 : 20A08.032 J01 ELEVATION 1 : 20A08.03

3 J01 SECTION

1 : 20A08.034 J02 KITCHENETTE PLAN

1 : 20A08.035 J02 KITCHENETTE ELEVATION

1 : 20A08.036 J02 KITCHENETTE SECTION

L4

NOTE - JOINER TO CO-ORDINATE SIZE OF ALLWHITEGOODS, SINKS & TAPWARE WITH JOINERY CARCASS


A08.04

2

3A08.04

600

350

PRINTER

FFL-GL

0

FCL-GL

2700

900

3510

0

EQEQEQ

L4

L2

L5

600

1100

100

L1

ADJ

EQ DOUBLE CUPBOARDS NUMBER TO SUIT LENGTH MAX 900mm WIDE EACH

REFER TO JOINERY PLAN A08 FOR LENGTH

ADJ ADJ

ADJ ADJ ADJ

ADJ ADJ ADJ

ADJ ADJ ADJ

PIN1

ALUMINIUM ANGLESURROUND TOEXPOSED EDGES

1300 CLEAR

REFER TO JOINERY PLAN A08 FOR LENGTH

PRINTER

FFL-GL

0

FCL-GL

2700100

1100

600

900

30

600

20

100

35

50

50

ADJ

ADJ

ADJ

ADJ




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


1 : 20


JCTN

RR

400597



1 : 20A08.041 J03 PRINT STATION PLAN

1 : 20A08.042 J03 PRINT ELEVATION

1 : 20A08.043 J03 PRINT SECTION


6680 COS

FRIDGE FRIDGEMW MWL4

4A08.05

SK1

TP1

5260

70060

5

DW

400

SK1

TP1

FFL-L1

3700

2 X MICROWAVESJOINER TO CO-ORDINATESIZE REQUIRED

OPEN

FR2FR2

SPLASHBACK

ADJ

ADJ

ADJADJ ADJ ADJ

L5L5

L5 L5

L5 L5

L5

L5

L5

L5L5

850

TO S

UIT

FR

IDG

ES

1750

1100

1500

600

100

CUPBOARD

600

ADJ

ADJ

ADJ

ADJ

ADJ

L2

L4

L1

NOTE - ALL HANDLESTO BE H1

L6

WALL MOUNTED ZIP BOILING WATER UNITTO BE POSITIONED OVER SINK DRAINER

RUBBISH

3A08.05

L2L2

ZIP L5

ZIP CHILLEDWATER UNIT

TO SUIT MICROWAVE OVENS

1200

OPENING TO SUIT FRIDGES

DRAWERS

600

DRAWERS

600

L5

RECYCLE

NOTE - JOINER TO CO-ORDINATE SIZE OF ALLWHITEGOODS WITH JOINERY CARCASS

CUTLERYINSERTS TOTOP DRAWERS

ADJ

ADJ

ADJ

ADJ

4A08.05

100

SIDEPANEL

MIN

150

CO

S

773

578

FCL-L1

6400

MW MW

115311541153

MIN

200

DISHWASHER

600

BIN DRAWER

600

1420

L5

ADJ

3 X CUPBOARDS

1660

BIN DRAWER

600

TP1 TP1

773

1828

100

400

50

30

100

50

TP1

UNDERBENCH ZIPCHILLED WATER UNIT

ALLOW CUTOUT IN BASE OFCARCASS FOR VENTILATIONTO ZIP UNIT

ADJ

700

20

35

L5

FFL-L1

3700

ADJ

100

30

L5

L5

L5

L2

50

SIDE PANEL TOMICROWAVECOMPARTMENT

100

400

50FCL-L1

6400

900

35

700

20

50

605




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


1 : 20


JCTN

RR

400597



1 : 20A08.051 J04 LUNCH PLAN

1 : 20A08.052 J04 LUNCH ELEVATION

1 : 20A08.053 J04 SECTION B

1 : 20A08.054 J04 SECTION A


A08.

06

2

L4

600

COS

3200

CLEAR

700

RECYCLEBIN

FFL-GL

0

FCL-GL

2700

900

6 X EQ CUPBOARD DOORS

3200

4010

0

6A08.06

CLEAR

700

600

1100

100

CO

S

L1L1L1

PIN1

L5 L5 L5

L4

L2

ADJ

ADJ

ADJ

ADJ

ADJ

ADJ

6 X EQ CUPBOARD DOORS

ADJ

ADJ

ADJ

ADJ

ADJ

ADJ

L1

ALUMINIUM ANGLE TOEXPOSED EDGES

RECYCLEBIN

GALVANISED DROP IN PLANTERCONTAINER ALLOW FORDRAINAGE TO CONTAINERS -PLANTER INTERNAL TO BEWATERPROOFED

3mm GAP BETWEENALL TIMBERS

MITRE ALL CORNER JOINS

2800

450

101

101

A08.06

4

A08.06 5

120

TIM2

TIM2

4 X UPHOLSTEREDCUSHIONS

120

101 101

ø 400

FFL-GL

0

450

2800

3mm GAP BETWEEN BOARDS

EQ

TIM2EQEQ

FFL-GL

0

450

3mm GAP BETWEEN BOARDS

EQ

TIM2EQEQ

ADJ

ADJ

ADJ

ADJ

20

50

600

30

400




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


1 : 20


JCTN

RR

400597



1 : 20A08.061 J05 UTILITIES PLAN

1 : 20A08.062 J05 ELEV

1 : 20A08.063 J06 PLANTER PLAN

1 : 20A08.064 J06 ELEV A

1 : 20A08.065 J06 ELEV B

1 : 20A08.066 J05 SECTION


FFL-GL

0

FCL-GL

2700

2A09

EQ EQ

COS

10279

100

1200

LB LB LB

SK1

SINGLE SIDE FLEX FACELIGHTBOXWITH CUSTOM PRINTGRAPHIC

GF3 GF3 GF3

P4

EQ

FFL-GL

0

FCL-GL

2700

1500

1200

SINGLE SIDE FLEX FACE LIGHT BOXWITH CUSTOM PRINT GRAPHIC

STUD WALL BUILT OUT TO SUITTHICKNESS OF LIGHT BOX

200

FFL-GL

0

FCL-GL

2700

GF1

1500

300

1200 GF1 GF1 GF1

FFL-GL

0

FCL-GL

2700

EQEQ

EQ EQ

GF1

GF1

GLADSTONE REGIONAL COUNCILLOGO IN COLOUR

1200

1200

FFL-L1

3700

100

SK1

FCL-L1

6400

PT1

FFL-L1

3700

12mm ACRYLIC SCREEN WITHMOTIF CUTOUTS

1000

EXISTING POSTPT04 FINISH

NEW POST. SIZE & SHAPE TO MATCHEXISTING WITH CONCEALED FIXINGS.PT04 FINISH

ALUMINIUM CHANNELTO SUIT WITH PT04 FINISH.

SCR1

7A09

FCL-L1

6400

1000

2700

CO

S

ACRYLIC SHEET 12mm THICKWITH MOTIF CUTOUTS.ALLOW TO CUT DOWN TO SUITCEILING HEIGHT.

351`

351`

96` 96`




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


As indicated


JCTN

RR

400597


ELEVATIONS TENDER

1 : 50A091 ELEVATION - LIGHTBOX WALL

1 : 50A092 SECTION - LIGHTBOX SECTION

1 : 50A093 ELEVATION - TYPICAL FILM DETAIL TO ALL G1 GLASS PARTITIONS

1 : 50A094 ELEVATION - CUSTOMER WAITING

1 : 50A095 ELEVATION A - FIRST FLOOR LUNCH ROOM

1 : 50A096 ELEVATION B - FIRST FLOOR LUNCH ROOM

1 : 20A097 ACRYLIC SCREEN SCR1


A09.01

2

WC1

WC1

WB2

TP2

WB2

TP2

LAMINATEBENCH

LAMINATEBENCH

TP2

GR2

WC2

GR2

GR1

GR1

GR1

GR1

FT1

FT1

FT1

FT1

A09.01

5

4

3

6

425

MIN

310

MIN

110

310

NO

M

WB3

MAX

400

120

R35

LAMINATESHELF

300

250

R35

AMBULANT TOILETS TO AS1428.1-2009

ACCESSIBLE TOILET TO AS1428.1-2009

M2

M2

L1

L1

L1

M2

- 100mm X 200mmCOVING TILE - GROUTLINES BETWEEN FLOORAND COVE TILE TO ALIGN

FT2

FT1

PD1

PD1

PD1

FFL-GL

0

FCL-GL

2700

WC1

WB2

TP2

BT

SPLASHBACK

L1

400

GR1

TO 8

10

800

TO 250

200

100

100

M2

MIR

RO

R

1000

WT1

10mm BEVEL EDGE TOMIRROR EDGES

- 100mm X 200mm COVING TILE - GROUT LINESBETWEEN FLOOR AND COVE TILE TO ALIGNFT2

PAP

ER T

OW

EL D

ISPE

NS

ER

1400

PAPER TOWEL DISPENSER SUPPLIED BYCLIENT AND INSTALLED BY CONTRACTOR

PD1

FFL-GL

0

FCL-GL

2700

GR

AB R

AIL

800

100

WC2

GR2

TRH

700

MAX

300 MAX


FFL-GL

0

FCL-GL

2700

WC2

100

GR2

50 MAX


FFL-GL

0

FCL-GL

2700

TP2

WB310

0

PAPER TOWEL DISPENSER SUPPLIED BY CLIENTAND INSTALLED BY CONTRACTOR - OUTLET TOPAPER TOWEL DISPENSER TO BE NO LESS THAN900mm OR NO MORE THAN 1100mm ABOVE FFL

- 100mm X 200mm COVING TILE -GROUT LINES BETWEEN FLOOR ANDCOVE TILE TO ALIGN

FT2

500 MIN

700

REF

ER T

O N

OTE

ABO

VE

935

PD1

800

MIN

830

BAS

IN

MIN

800

830

SH

ELF

1000

M2

320

WB3

D08

WT1

10mm BEVEL EDGETO MIRROR EDGES


PD1




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


1 : 20


JCTN

RR

400597


TOILET DETAILS TENDER

1 : 20A09.011 PLAN - GROUND FLOOR TOILETS

1 : 20A09.012 ELEVATION - FIRST FLOOT TYPICAL AMBULANT TOILET

1 : 20A09.013 ELEVATION 1- GROUND FLOOR ACCESSIBLE TOILET

1 : 20A09.014 ELEVATION 2 - GROUND FLOOR ACCESSIBLE TOILET



NOTE

DISABLED TOILETS TO COMPLY WITH AS 1428.1 - 2009


UR1

UR1

WC1 WC1

WC1 WC1

WC1WC1

A09.03

2

A09.02

2

A09.03 1

A09.033

1000

1105

WB1 WB1 WB1

WB1WB1WB1

TP2 TP2 TP2

TP2TP2 TP2

PLINTH WALL BOTH SIDES1000 AFFL TO CREATE SHELF

NOTE - ALL TOILET ROLL HOLDERS TO BEINSTALLED 700mm FROM FFL TO BASE OFTOILET ROLL HOLDER

TRH TRH

TRH TRH

TRHTRH

HK

HK

BS

BS

SCRN

TR

SCRN

TR

TR6

SR

SR

TP3

TP3

SHLF

SHLF

FT1

FT1

FT1

FT1

FT1

FT1FT1

M1

M1

M1

M1 M1

M1

5

WASTE

WASTE

TILE SHOWER ENCLOSURE WALLS WT1 WITH SKIRTING 100mm HIGH

TILE SHOWER ENCLOSURE WALLS WT1 WITH SKIRTING 100mm HIGH

L3

L3

WT1

WT1

WT1

WT1

WT1

WT1

72

FT1FT1FT1

FT1

FT1

FT1

- 100mm X 200mmCOVING TILE - GROUTLINES BETWEEN FLOORAND COVE TILE TO ALIGN

FT2

PD1

PD1

PAPER TOWEL DISPENSER SUPPLIED BYCLIENT AND INSTALLED BY CONTRACTOR1400 AFFL TO BOTTOM OF DISPENSER

PAPER TOWEL DISPENSER SUPPLIED BYCLIENT AND INSTALLED BY CONTRACTOR1400 AFFL TO BOTTOM OF DISPENSER

150

100

FFL-L1

3700

3380 COS

M1 M1 M1

TP TP TP

1016

1000

900

MIRROR

EQ

MIRROR

EQ

MIRROR

EQ

1127 1127

- 100mm X 100mm

- 100mm X 200mm COVING TILE - GROUT LINESBETWEEN FLOOR AND COVE TILE TO ALIGN

3A09.02

FT2

WT1

100

FCL-L1

6400

BUTT

JO

IN

BUTT

JO

IN

10mm BEVEL EDGE TO MIRROR EDGES

PAP

ER T

OW

EL D

ISPE

NS

ER

1400

PD1

PAPER TOWEL DISPENSER SUPPLIED BYCLIENT AND INSTALLED BY CONTRACTOR

100

FFL-L1

3700

WB1

TP2

BT

M1 MIRROR

L3

FT2FT1

POLISHL3 EDGE

150

1000

PLINTH WALL

WT1 100

900

PAP

E R T

OW

E L D

ISP

ENSE

R

1400

PD1




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


As indicated


JCTN

RR

400597



1 : 20A09.021 FIRST FLOOR FRONT TOILETS PROPOSED DETAILS PLAN

1 : 20A09.022 ELEVATION 1 - FIRST FLOOR WASH BASINS TYPICAL

1 : 10A09.023 SECTION - FIRST FLOOR TOILETS


FFL-L1

3700

UR1 UR1

100

1400

WT2

STAINLESS STEEL ANGLETO EDGE OF WALL TILES

FCL-L1

6400


FFL-L1

3700835

TR

TR

TOW

EL R

AIL

900

TOW

EL

RA

IL

900

EQ EQ

FT2

TILEDHOB

100

SHLF

SR

TP3

1100

HK

FCL-L1

6400

2000

WT1

TOWEL RAILCENTRE

1135

CLO

T HES

HO

OKS

1600


SCRNSHOWERSCREEN

FFL-L1

3700

TR

TR

HK

TOW

EL

RA

ILS

900

CLO

THES

HO

OKS

1600

SR

TP3SHLF

WT1

FT2

100

TILEDHOB

FCL-L1

6400

800

TOWEL RAIL CENTRE

1100

TOW

LEL

RA

ILS

900

2000

1100 BS

P3


SCRNSHOWERSCREEN

WC1

NOTE - ALL TOILET ROLL HOLDERSTO BE INSTALLED 700mm FROM FFLTO BASE OF TOILET ROLL HOLDER

TRH TRH

WC1

FT1

FT1 FT1

FT1FT1

WB1

TP2

WB1

TP2

PLI

NTH

WAL

L FO

R W

ASH

BA

SIN

1127

3A09.02

Sim

A09.02 2M1 M1

L3 L3

- 100mm X 200mm COVINGTILE - GROUT LINES BETWEENFLOOR AND COVE TILE TO ALIGN

FT2

PD1 PD1

150

150

PAPER TOWEL DISPENSERSSUPPLIED BY CLIENT ANDINSTALLED BY CONTRACTOR 1400AFFL TO BOTTOM OF DISPENSER

FFL-L1

3700

FCL-L1

6400

BS

TR

TRHK

CLO

T HES

HO

OKS

1600

TOW

EL R

AIL

900

TOW

EL

RA

IL

900

100


TR

TR

BS

HK

FT2

WT1

2000

FT2

100


SCRNSHOWERSCREEN




Revision

Scale @ A1

Date

Designer Drawn

Project Manager


Client

Address

Title

Approx Area

Sydney +61 2 8243 3700

Brisbane +61 7 3002 6999

Perth +61 8 9325 5522


1 : 20


JCTN

RR

400597



1 : 20A09.031 ELEVATION 3 - FIRST FLOOR URINALS

1 : 20A09.033 ELEVATION 4 - FIRST FLOOR MALE SHOWER

1 : 20A09.032 ELEVATION 2 - FIRST FLOOR FEMALE SHOWER

1 : 20A09.034 FIRST FLOOR REAR TOILETS PROPOSED DETAIL PLAN

1 : 20A09.035 ELEVATION 1 - FIRST FLOOR FEMALE SHOWER

1 : 20A09.036 ELEVATION 5 - FIRST FLOOR MALE SHOWER


1 GRC | 113 Goondoon Street, Gladstone TENDER ISSUE | 23/11/2012

Finishes Furniture & Joinery Schedule

project : Gladstone Regional Council project # : 400597 project address : 113 Goondoon Street, Gladstone date : November 2012 project team:

name position phone

email

Hugh Harris Director 3002 6914 [email protected]

Victoria Robson Design Assistant 3002 6990 [email protected]

Rob Rose Project Manager 3002 6912 [email protected]

summary of revisions/amendments

addendum #

description of revisions/amendments

date

01 TENDER 23.11.2012


Finishes schedule code finish location supplier specification flooring CPT1 Carpet General

Please refer to drawings for specific locations.

Interface Flor Range: Velocity Colour: Degree

CPT2 Carpet General


Interface Flor Range: Velocity Colour: Ratio

CPT3 Carpet Feature


Interface Flor Range: Monochrome Colour: Yew

CPT4 Carpet Feature


Interface Flor Range: Monochrome Colour: Asparagus

CPT5 Carpet Feature


Interface Flor Range: Monochrome Colour: Artichoke


Finishes schedule code finish location supplier specification CPT6 Carpet Feature


Interface Flor Range: Monochrome Colour: Legacy

CPT7 Carpet Feature Please refer to drawings for specific locations.

Interface Flor Range: Monochrome Colour: Medici Blue


Interface Flor Range: Monochrome Cpt8: Colour: Juniper


Interface Flor Range: Monochrome Colour: Morning Glory


Interface Flor Range: Monochrome Colour: Spun Gold


Finishes schedule code finish location supplier specification V1 Vinyl

Staff Kitchen Kitchenette Comms Room

Armstrong Accolada Safe Plus Black Opal 2mm thick Installation as per manufacturers guidelines

FT1 Floor Tile Amenities Granito Range: Salsa Colour: Oasis Ivory R11 Matt finish Dimensions: 200 x 200

FT2 Cove Tile Amenities Granito Range: Cove

Colour: Ivory Matt finish Dimensions: 200mm x 100mm x 28mm

NOTE: ALUMINIUM ANGLE TO ALL FLOORING JUNCTIONS walls PT01 Paint General walls

throughout

Bristol Bassinet P001-L3 Low VOC Low sheen finish

PT02 Paint Reception Feature Wall Door and Frames

Bristol Bistro Green P160-C7 Wall Finish: Low sheen Door and Frame Finish: Semi gloss

PT04 Paint Existing & new column in Kitchen

Bristol Bassinet P001-L3 Finish: High Gloss


Finishes schedule code finish location supplier specification Walls PT05 Paint Amenities Bristol Bassinet P001-L3

Low VOC Semi gloss finish

FB1 Fabric Operable Wall

Woven Image Range: Echo Panel Mura Otto Colour: 362 Lettuce on Cream

L3 Laminate Amenities Laminex Compact Laminate 10mm thick Alaskan 334

SCR1 Feature acrylic screen

Lunch Room Baresque Lightblocks Taglio Breeze 10mm Clear 3000mm x 1000mm

WT1 Wall Tile Amenities Walls National Tiles Gloss White 100 x 100 Tiles

WT2 Wall Tile Amenities Walls National Tiles Gloss Grey 100 x 100 Tiles

WTG1 Wall Tile Grout Amenities Ardex Range: Ardex FG8 Colour: 200 White Thickness 3mm

WTG2 Urinal Wall Tile Grout

Male toilets Metz Tiles Metz 19 Epoxy Grout Colour: Dark Grey to match wall tile

frames ALU Aluminium ceilings PT04 Paint Level 1 Ceiling

skirting SK1 aluminium General 100mm clear anodised Alum.

Grey rubber insert Glazing film GF1 Glazing Film Refer elevations Signage Contractor 3M Dusted Crystal 7725-314

Acid Etched Look

GF2 Glazing Film Refer elevations Signage Contractor Custom Print Vinyl Graphic

GF3 Glazing Film Refer elevations Signage Contractor Custom Print Vinyl Graphic


Furniture schedule code supplier specification image WSA WSB

Specfurn Straight Genny workstations 1800 x 750 and 2100 x 750 and 4 x Hot desks 1500 x 750 with 30mm x 480h Screens to be 1250mm high upholstered in Hex Screen fabric, along the spines, attached to the worktops and slide on Melamine dividing screens between workstations and at the open corridor ends. Each workstation to have cable trays under the desk fitted with power rail for 4 GPO and plates for 2 data . One x yellow umbilical per cluster of workstations. 25mm 'White' tops and 1 x screen mounted shelf. Desk Finish: Laminex Colour: White 200 Finish: Natural Finish Leg Finish: Dulux powder coat Colour: White Satin 1139S Duralloy Pinboard Finish: Woven Image Range: Echo Screen Hex Colour: 101 Grey

With aluminium angle to all exposed edges

IMAGE IS INDICATIVE ONLY


Furniture schedule code supplier specification image WSC Office desk

L shape Genny desks/returns 2100 x 1800 x 750 with mobile caddy and modesty Wall mounted pinboard 600mm high in Hex Screen fabric. Desk Finish: Laminex Colour: Sublime Teak 288 Finish: Natural Finish Leg Finish: Dulx powder coat Colour: White Satin 1139S Duralloy Pinboard Finish: Woven Image Range: Echo Screen Hex Colour: 468 Cream

With aluminium angle to all exposed edges

WSD Laminate desk with matching slab ends 720mmH desks refer drawings for depth and length measurements Finish: Laminex Colour: White 200 Finish: Natural Finish

NO IMAGE


Furniture schedule code supplier specification image C1 Visitor Chair

Specfurn Zebra fully upholstered chair Upholstery: Woven Image Range: Global Colour: 384 Apple

C2 Meeting and Task Chair

Specfurn Rexa chair 2 lever, Medium back, fully upholstered, CAT 2 fabric, with arms, AFRDI level 6 and GECA certified

C3 Breakout bar stool

Chairbiz Lilly TPSG 720mmH Frame finish: chromed steel Seat colour: White

C4 Breakout Single Seater Lounge

Specfurn PLYLO client chair Upholstery: Woven Image Range: Global Colour: 384 Apple


Furniture schedule code supplier specification image C5 Breakout 2 Seater Lounge

Zenith Troy Lounge Size: 1845 long Upholstery: Woven Image Range: Global Colour: 444 Quarry

C6 Breakout Stool

Stylecraft Harlie Stool 450mmH x 450mmW x 520mmD Colour: Blue

C7 Dining Chair

Café Culture Moema Legs finish: White powder coated steel Seat finish: White 590mm x 540mm x 470mmH

T1 Meeting Table 1

Specfurn I.AM Rectangular Table 1800mmL x 1100mmW x 720mmH Finish: Laminex Colour: Sublime Teak 288 Finish: Natural Finish With matching ABS edge


Furniture schedule code supplier specification image T2 Breakout Bar Table

Eurofurn Plantation 1100mW x 2400mmL x 1050mmH Finish: Spotted gum Solid timber frame and stainless steel foot rail

T3 Breakout Coffee Table

Café Culture Link Table Powder coated steel Colour: White 640mm DIA x 320mmH

T4 Breakout Dining Table

Café Culture Doll table 800mmW x 800mmD x 750mmH Top: White Base: White

T5 Dining Table

Baresque LA Base Powder Coated, 695mmH to suit a Lightblocks Ply Top 900mm DIA Base Finish: Dulx powder coat Colour: White Satin 1139S Duralloy Top Finish: Lightblocks Ply Top Colour: Vivid White

T6 Meeting Table 2

Specfurn I.AM TURN Rectangular Table 1800mmL x 1100mmW x 720mmH Finish: Laminex Colour: Sublime Teak 288 Finish: Natural Finish With matching ABS edge


Furniture schedule code supplier specification image ST1 Tambour unit with planter

Planex S Series Tambour Door cabinets and Flox planter boxes Unit:1000mm High x 900mm Wide x 500mm Deep Flox: 225mm High for 3 plants 200mm pots Unit: Fitted with 2 shelves, 3 square toast racks Flox: Fitted with insert tray and drip tray and Colour: Satin White rubber feet

ST2 Full Height Storage Unit

Specfurn Open Metal Storage Unit 5 No. Adjustable Shelves Finish: Standard White Powdercoat Dimensions: 1980H x 900W x 450D

ST3 Mobile caddy storage unit

Specfurn Caddy with 3 drawers and open shelving area Finish: Dulux Powder coat Colour: Lemon Yellow Gloss 984-32120 Allow Caddy for each workstation and office


Furniture schedule code supplier specification image ST4 Compactus

Dexion Mekdrive Compactus Size: 9160L x 2075D No of Bays: 36 No of Bay wide: 18 No of Bays deep: 2 Bay arrangement: 2 single sides and 8 double sided Minimum Aisle width: 800mm Tracks & Runners: Low profile anodised incorporating anti-tilt mechanism Ergonomic operating hand wheel operation of the belt drive Shelving Bays: 2175H x 900W x 400D, 2 bays per block Storage Levels: no of storage levels 5 Finish: Stone White colourbond


joinery schedule code finish location supplier Specification J01 Resident PC Cupboard L1 Laminate Joinery top and

doors Laminex Colour: White 200

Finish: Natural Finish

L2 Laminate Kick Laminex Laminex Innovation

Colour: Brushed Stainless Steel 957 Finish: Metallic Finish

H3 Handle Doors & Drawers Barben BAC 166-A


joinery schedule code finish location supplier Specification J02 Kitchenette L5 Laminate Under bench

cupboards and overheads

Laminex Colour: Sublime Teak 288 Finish: Natural Finish

L6 Laminate Splashback Laminex Laminex Innovations

Pure Clone 117 Finish: Gloss Finish

L4 Laminate Bench top Laminex Colour: Pure Calcite 221

Finish: Natural Finish With squareform edge

L2 Laminate Kick Laminex Laminex Innovations Colour: Brushed Stainless Steel 957 Finish: Metallic Finish



joinery schedule code finish location supplier Specification J03 Typical Print Utility L1 Laminate Overheads Laminex Colour: White 200

Finish: Natural Finish

L4 Laminate Bench top Laminex

Squareform Colour: Pure Calcite 221 Finish: Natural Finish With squareform edge

L5 Laminate Under bench cupboards






joinery schedule code finish location supplier Specification J04 Staff Kitchen L5 Laminate Under bench

cupboards and overheads


L4 Laminate Bench top Laminex Colour: Pure Calcite 221

Finish: Natural Finish With squareform edge




J05 Timber Bench with Seat Cushions TB Timber bench Boral Tallow wood

Water based sealant Satin Finish NOTE: supplier to provide suitable lengths to suit as drawn

FB2 Fabric Seat cushions Woven Image

Range: Hex Colour: 273 Navy/cobalt


Joinery schedule code finish location supplier Specification Joinery: Cabinetmaker is to fit appliances in liaison with Hydraulic and Electrical contractors. Refer to equipment and Audio Visual schedule for details. Joiner to produce shop drawings for all joinery for approval by designer prior to commencement of works. Joiner to check dimensions on site prior to commencement of works and request confirmation from Smith Madden representative if any queries. Do not scale from drawings. Existing slab conditions to be checked by contractor and taken into account prior to manufacture of all joinery items. The associated drawings convey the designer’s intent regarding all visible components. Any structural or framing members are indicative only. Any concealed framing, fixing and under bench supports to be resolved by contractor to ensure correct fixing, strength & structural stability. All fixings to be concealed from normal viewing angles. All carcasses to be fitted with press fit colour matched trim caps to fixing points. Any variations to design intent depicted in associated drawings to be verified with Smith Madden Group prior to manufacture of any work All bench tops to be 33mm thick, finished in melamine with matching ABS edging (unless otherwise noted) Joiner to make allowance to existing ducted skirting as indicated on drawing, and neatly cut joinery to suit as required. All shelves to be supported on approved nickel plated spoon shaped supports and sleeves at 32mm increments to full height of carcass starting at 100mm from top and bottom of carcass interiors. All built – in joinery shall be scribed to adjacent walls. Plumb and level all units and install adjustable feet where required (unless otherwise noted) Joints in bench tops and skirting are to line up with cupboard door lines where necessary Benchtops / Built in Worktops/ Tables Nominal finished thickness to all benchtops unless noted otherwise shall be 35 mm. All benchtops are to be hand laminated / veneered as specified Approved surface laminates: Laminex premium grade 1.1mm thick nominal laminate shall be used on all surfaces unless noted otherwise. Laminex Redback grade, 8mm thick laminate to be used for all post formed bench tops only. Laminex Antistatic Redback laminate to be used on all I.T. tech and computer room bench /work tops only. Veneers where specified shall be from supplier nominated and shall be confirmed from same log batch unless agreed otherwise with Designer Approved substrates: 32mm thick water resistant board to be used in all wet areas (kitchen, tearooms, vanities etc) 33 mm thick HMR Particle Board 32 mm thick MR Craftwood Underside of bench tops to be hand laminated/ veneered to extent of projection of bench top from face of internal carcases. Worktops to be laminated / veneered to full underside of top. Tea bench: provide silicone seal to all junctions between joinery and walls/floor. Colour to match laminate. Doors, Carcases, panels and Kickboards Exposed Slab ends: 33mm thick nom. (refer to drawings) Carcases: 18mm thick nom. Adjustable Shelves: 25mm thick nom. spanning to 900mm Doors: 18mm thick nom. for all under bench and overhead Cupboards 25mm thick nom. for all full height doors

Approved materials: Laminex prelaminated Structural MR / Laminex Vertiboard MR (carcases only) Laminex particleboard & Craftwood where veneer surface finish specified. 18mm thick water resistant board to be used for cupboards in all wet areas (kitchens, tearooms, vanities etc) Scribbers: All built in joinery shall be scribbed to adjacent walls. Joiner to ensure width of scribbers is suitable for specified handles. Plumb and level all units and install adjustable feet where required. Drawer Runners: Full extension bull bearing type – Hafele or similar approved (to be nominated with tender). Adjustable shelf supports: All shelves to be supported on approved nickel-plated spoon shaped supports and sleeves at 32mm increments to full height of carcases starting 100mm from top and bottom of carcase interiors. Hinges: Concealed type Salici or similar approved (to be nominated with tender). Connectors: No exposed fixings allowable. All carcases to be fitted with press fit colour matched trim caps to connectors. Overhead units: Ensure fixings for overhead units are secured through plasterboard into studwork. Plasterboard fixings only will not be accepted. Hanging rails:25mm tubular rails (chrome finish) with support for long lengths Sliding Tracks: xxxxxxxxxxx Worktop/benchtops: Finished height of all worktops and benchtops to be a maximum +/- 10mm of specified height when existing floor conditions are taken into account. Grommets: Xxxxxxxxxxx Edgestrips: Rigid 2mm thick ABS edge - colour to match benchtop Premium grade laminate edge – colour to match benchtop Trims 2mm nominal thick. Finished natural anodised trim to edge of tiles. Face of trim to be flush with tile surface All resin surfaces to have mitre joints unless specified otherwise Electrical outlets: refer to joinery details for location of electrical outlets where applicable


fittings fixtures and equipment schedule item supplier specification image Lightbox – Rear Wall Signarama Lightbox

Single Side Flex Face lightbox Top hinged with custom print graphic to face Dimensions: refer drawings

J02 Kitchenette FR1 Bar Fridge

Fisher and Paykel

Bar Fridge 115L P120RX Finish: EZKleen Stainless Steel Dimensions: H 819 x W 525 x D 570

TP1 Mixer Tap

Clark Irwell Pin Lever Sink Mixer Gooseneck Outlet

Chrome

SK1 Sink

Clark

Quatro Single End Bowl 20.2L per bowl 800L x 500W x 197D

RB Rubbish Bins

Joiner

Pull out Drawer

Size: Refer joinery drawings

Joiner to construct drawer base and provide 1 full size bin

Finish: Black Melamine

Qty = 2


fittings fixtures and equipment schedule item supplier specification image J04 Staff Kitchen FR2 Upright Fridge with Top Freezer

Fisher and Paykel

ActiveSmart™ Fridge- Top Freezer 447L E440TRX3 Finish: EZKleen Stainless Steel Dimensions: H 1695 x W 680 x D 715

TP1 Mixer Tap

Clark Irwell Pin Lever Sink Mixer Gooseneck Outlet

Chrome

SK1 Sink

Clark

Quatro Single End Bowl 20.2L per bowl 800L x 500W x 197D

MW Microwave

Panasonic

NN-ST671S Microwave Oven, 32 L capacity Finish: S/steel

DW Dishwasher

Fisher and Paykel

Dishwasher DW60CEX1 Finish: Brushed Stainless Steel Dimensions: H 850 - 870 x W 595 x D 600

RB Rubbish Bins

Joiner Pull out Drawer

Size: Refer joinery drawings

Joiner to construct drawer base and provide 1 full size bin

Finish: Black Melamine

Qty = 2


fittings fixtures and equipment schedule item supplier specification image Amenities WB1 Wall Basin

Reece Ideal Standard Concept Wall Basin

WB2 Wall Basin

Reece White Stone Hox Mini Wall Basin

TP2 Mixer Tap 2

Reece Mizu Basin Mixer

BT Bottle Trap

Reece Mizu Bottle Trap

TP3 Shower mixer Tap

Reece Mizu Shower Mixer

SR Shower Rail

Reece Posh Bristol Shower Rail

SCRN Shower Screen

Stegbar Softline Series Framed Glass screen with hinged door Size: to suit opening


fittings fixtures and equipment schedule item supplier specification image WC1 Toilet

Harvey Norman Commercial

RAK Bathware B Cool Close Coupled Suite S Trap Concealed Floor Fixings White ABS Toilet Seat & lid with Stainless Steel Hinges 4 Star Wels Rated Dual Flush Cistern

GR1 Ambulant Grab Rail

Grab Rail Clean Seal Model No. GRCS05 Left hand model and right hand model

UR1

Watersave Australia

Brand: Uriden Model: KH-6 Finish: Ceramic


fittings fixtures and equipment schedule item supplier specification image WC2 Disabled Toilet

HaCaromarvey Norman Commercial

Cosmo Sovereign Care Toilet Suite

WELS 4 star rated

White Caravelle Care seat

Backrest

CODE: 987919BW

To be installed to comply with AS1428.1

GR2 Grab Rail Disabled Toilet

JD Macdonald

Grab Rail WC – Set 90 degrees (right handed)

CODE: GRC53 RH To be installed to comply with AS1428.1

WB3 Basin Disabled Toilet

Caroma Cube Care Wall Basin

Includes white plug and chrome waste

1 tap hole

Vitreous china, white only

CODE: 683515W

To be installed to comply with AS1428.1

TP2 Mixer Tap Disabled Toilet

Harvey Norman Commercial

Caroma Nordic Care Basin Mixer Hot/Cold - Chrome

CODE: 90965C5A

WELS 5 star rated


fittings fixtures and equipment schedule item supplier specification image M2 Mirror Disabled Toilet

Jubilee Framers

Safety Mirror mounted to wall to finish flush with tiles

600W x 1800H

BS Bench Seat

Laminex Laminex Change Bench Wall Mounted Size: 900W x 390D x 470H Finish: Oyster Linea Compact Laminate Qty = 1

TR Towel Rail

JD Macdonald

Double Towel Rail Chrome Plated Lilla Collection Code: 6810-14-81CP Size: 660W x 110 Projection

SHLF Shower Shelf

JD Macdonald

Shower Basket Size: 220L x 150W x 48D Chrome Finish Code: 6807-86

TRH Toilet Roll Holder

Supplied by GRC

HD1 Paper Towel Dispenser

Supplied by GRC

HK Multiple Hook

JD Macdonald

Utility Hook Strip 4 No. Hooks Size: 915L Code: 1307-4


signage item supplier specification image SN1 Amenities Signage Ground Floor

Pictobraille Entry Door Signage

Signage to Disabled WC to comply with AS1428.1 Code: PBS-AUAT Black on Silver Acrylic Mounted at 1200 to bottom of Braille

SN2 Amenities Signage Ground Floor

Pictobraille Signage to Ambulant WC to

comply with AS1428.1 Code: PBS-FMambT Black on Silver Acrylic Mounted at 1200 to bottom of Braille


Pictobraille Signage to Ambulant WC to

comply with AS1428.1 Code: PBS-MAmbT Black on Silver Acrylic Mounted at 1200 to bottom of Braille


Pictobraille Signage to Disabled WC to

comply with AS1428.1 Code: PBS-UATLH Black on Silver Acrylic Mounted at 1200 to bottom of Braille

SN5 Amenities Signage Level 1


Signage to Female Toilets and Shower to comply with AS1428.1 Code: PBS-FTAS Black on Silver Acrylic Mounted at 1200 to bottom of Braille


signage item supplier specification image SN6 Amenities Signage Level 1


Signage to Male Toilets and Shower to comply with AS1428.1 Code: PBS-MTAS Black on Silver Acrylic Mounted at 1200 to bottom of Braille

SN5 Shower Sign

Pictobraille Shower Sign Black on Silver Acrylic Code: PBS-S Mounted at 1200 to bottom of Braille

door schedule

CLIENT PROJECT NUMBER REVISION REVISION NOTES

400597 A FOR TENDER

D# LOCATION SIZE HARDWARE CODE QTY FINISH NOTES

D17 Customer Waiting 920 Full Height Aluminium Framed Glass Hinged Door Door Frames to suit Glazing Frame

1 Frame: Anodised Aluminium

Refer Assa Abloy Doors Schedule for Hardware & LockingWith Access control - refer Security DrawingsRefer Architectural drawings for glazing film details

D30 Meeting Room Operable Door

Lotus Operable Wall SystemOperable Wall Series OW-100F-45-SX2Panels shall be 100 series with fineline panel junctions1.6mm Flat Jamb to be usedPass door/ Expander PanelRW 49 Acoustic Rating

1 Finline frame:Anodised Aluminium

Door Hardware & Locking by Lotus DoorsRefer Architectural drawings for finishes elevations

920 opening

Single Hinged Doors Full height solid core doorsExternal Grade Door

1 PT2Door and Frame

Dulux Low VOC Semi Gloss Acrylic

Refer Assa Abloy Doors Schedule for Hardware & Locking

Satin Chrome

With Access control - refer Security Drawings

D1 External Door

GLADSTONE REGIONAL COUNCILNOTE: BUILDER TO REVIEW AND CHECK SCHEDULE FOR ACCURACY PRIOR TO ORDERING. BUILDER TO ENSURE HANDING. BUILDER TO CHECK CEILING HEIGHTS PRIOR TO ORDERING DOORS

7/11/2012 1 OF 2

door schedule

CLIENT PROJECT NUMBER REVISION REVISION NOTES

400597 A FOR TENDERGLADSTONE REGIONAL COUNCILNOTE: BUILDER TO REVIEW AND CHECK SCHEDULE FOR ACCURACY PRIOR TO ORDERING. BUILDER TO ENSURE HANDING. BUILDER TO CHECK CEILING HEIGHTS PRIOR TO ORDERING DOORS

D# LOCATION SIZE HARDWARE CODE QTY FINISH NOTES

920 opening

Single Hinged Doors Full height solid core doorsDoors to suitable for 2 hour fire rated room

1 PT2Door and Frame



Satin Chrome

With Access control - refer Security Drawings Satin Chrome

920 Full height solid core door 14 PT2Door and Frame



Satin Chrome

920 Full height solid core door 3 PT2Door and Frame



Satin Chrome

With Access control - refer Security Drawings

920 min Full height solid core door 2 PT2Door and Frame


clear opening


Satin Chrome

700 min Full height solid core door 5 PT2Door and Frame


clear opening


Satin Chrome

to suit opening

Full height solid core door 2 PT2Door and Frame



Satin Chrome

to suit opening

Full height solid core door 1 PT4Door and Frame



Satin Chrome

D24, D32 FHR Cupboards

D9, D10, D25, D26,

D27

Toilet Doors

D8, D28 Disabled Toilet & Shower Doors

D12, D13, D14

General Office

D16 FHR Cupboards

General OfficeD2, D3, D4, D5, D6, D7, D11, D18, D19, D20, D21, D22,

D23

D29 Comms Room

7/11/2012 2 OF 2

gladstone regional councilinfo.gladstonerc.qld.gov.au/meetings/20130219/attachments... ·...

Documents