industrial general purpose slim luminaire ip 20 …jpsdpl.com/cg/industrial.pdf · crompton greaves...

Crompton Greaves Light Book2000

1

LUMINAIRE:Comprises box type channel fabricated fromCRCA MS sheet stove enamelled in white &light dove grey paint from outside for IGP12& IGP13 respectively. Channel cover whichalso acts as a reflector is finished in stoveenamelled white. Luminaire is prewired withvacuum pressure impregnated copper woundballasts,power factor improvement capacitor,pushfit bi-pin rotor holders and mainsconnector.IGP13 has bi-pin rotor lockholders.

INDUSTRIAL GENERALPURPOSE SLIM LUMINAIRE

IGP12/IGP13IP 20

MOUNTING:Suitable for 19mm conduit suspension.

CABLE ENTRY:Is through 19mm conduit.

APPLICATIONS:Suitable for use in shops, offices, warehouses,stores etc.

D

C

A

B

Also available with energy saving electronic ballast or 5.5W (loss) VPIT ballast on request.In such a case please replace suffix �HSB� witheither �EB� or �HSBLL� respectively.

Lamp Voltage Current Dimension (mm) Approx Case Cat Ref (V) (A) Wt lot

Ty pe No Watts A B C D (Kgs) (Nos)

IGP12 14HSB FTL 1 36/40 240 0.23 1236 600 80 56 1.65 10IGP12 24HSB FTL 2 36/40 240 0.45 1236 600 80 103 2.45 10IGP1314HSB FTL 1 36/40 240 0.23 1236 600 85 46 1.65 10IGP1324HSB FTL 2 36/40 240 0.45 1236 600 85 103 2.45 10

Polar Diagram - IntensityDistribution in cd / klm.


2

REFLECTORS:RSE:Fabricated from CRCA MS sheet and stoveenamelled light dove grey outside andreflecting white inside. Reflector gives widerlight distribution and improved verticalilluminance.

RVE:Fabricated from CRCA MS sheet and vitreousenamelled grey from outside and reflectingwhite inside. Reflector gives better opticalcontrol and improved vertical illuminance.Recommended for use in humid or corrosiveatmospheres.

RBA:Scientifically made from high purityaluminium sheet. Reflector gives wider lightdistribution and improved verticalilluminance.

RPC:Fabricated from CRCA MS sheet and whiteepoxy powder coated from inside and outside.Reflector gives wider light distribution andimproved vertical illuminance.Recommended for use in humid or corrosiveatmospheres.

MOUNTING:All the reflectors have a special locking devicefor fixing on the basic IGP channel.

APPLICATIONS:Suitable for use in stores, warehouses, textileand engineering industries where mountingheights are less than 5 meters.

REFLECTORS

RSE/RVE/RBA/RPC


ISE14


3

REFLECTORS

RSE/RVE/RBA/RPC

A

B

C

RPC

A

B

C

RSE

RVE

A

B

C

A C

B

RBA

Lamp Dimension (mm) Approx CaseCat Ref Wt Lot

Type No Watts A B C (Kgs) (Nos.)

RSE14 FTL 1 36/40 1195 180 62 1.2 10RSE24 FTL 2 36/40 1195 262 62 1.5 10RVE14 FTL 1 36/40 1195 172 59 1.9 10RVE24 FTL 2 36/40 1195 244 63 2.3 10

RBA14 FTL 1 36/40 1195 175 56 0.3 10RBA24 FTL 2 36/40 1195 213.5 66.7 0.4 10RBA22 FTL 2 18/20 580 213.5 66.7 0.2 10

RPC14 FTL 1 36/40 1195 180 62 1.2 10RPC24 FTL 2 36/40 1195 262 62 1.5 10


4

LUMINAIRE:Body made from deep drawn CRCA MS sheetand finished in stoving light dove grey.Reflector cum controlgear tray is fabricatedfrom CRCA MS sheet, finished in stovingwhite and prewired with vacuum pressureimpregnated copper wound ballasts,powerfactor improvement capacitor, push fitbi-pin rotor holders and mains connector. Anelegantly shaped, high transparency, clearacrylic cover is clamped to the canopy, bystainless steel toggles.

CABLE ENTRY:Is through single compression cable glandprovided on the side of the housing.

RELAMPING:Can be done easily by releasing toggles andopening acrylic cover.

MOUNTING:Two nos.brackets on top of the luminairefacilitate mounting.

APPLICATIONS:Suitable for areas laden with dust eg. conveyorbelts, galleries of coal handling plants, cementplants, chemicals and fertiliser factories etc.

INDUSTRAL DUST ANDJET PROOF LUMINAIRE

IDJ

1. Also available with energy saving electronic ballast or 5.5W (loss) VPIT ballast on request.In such a case please replace suffix �HSB�with either �EB� or �HSBLL� respectively.2. Also available with Aluminium housing.

Lamp Type Voltage Current Dimension (mm) Approx Case Cat Ref of (V) (A) Wt lot

Type No Watts Holder A B C D (Kgs) (Nos)

IDJ1124HSB FTL 2 36/40 Bi-pin 240 0.45 1290 992 125 115 4.9 6


IP65

A

D

B C


5


Type No Watts Holder A B C D (Kgs) (Nos)

IFC1124HSB FTL 2 36/40 Bi-pin 240 0.45 1317 600 150 100 4.27 6

LUMINAIRE:Comprises housing, resin transfer mouldedfinished in light grey. Reflector plate whichalso acts as a gear tray, is fabricated from CRCAMS sheet and finished in stoving white. It isprewired with vacuum pressure impregnatedcopper ballast, power factor improvementcapacitor, rotor lock type bi-pin lampholders,starters and mains connector. Anelegant transparent acrylic cover is clampedto the canopy by toggles.

CABLE ENTRY:Is through a 19 mm polypropylene nutprovided for fitment of cable gland.

RELAMPING:By releasing toggles on both sides, the acryliccover can be opened for maintenance.

APPLICATIONS:Suitable for areas where highly corrosiveatmosphere prevails e.g. acid plants, batteryrooms, chemical and fertilizer factories etc.

INDUSTRIALCORROSION PROOF LUMINAIRE

IFC 11IP54


Also available with energy saving electronic ballast or 5.5W (loss) VPIT ballast on request.In a such case please replace suffix �HSB� witheither �EB� or �HSBLL� respectively.

A

B

C

D


6


Type No Watts Holder A B C (Kgs) (Nos)

IFV1124HSB FTL 2 40 Bi-pin 240 0.45 1350 177 170 4.3 2

LUMINAIRE:Comprises die cast aluminium controlgearend boxes connected by means of 19mm M.S.pipe and finished in hammertone grey.Synthetic rubber gasket is fixed on theperiphery of the boxes to make the wholeluminaire completely vapour proof. Bi-pinrotor holders are housed in specially designedvapour proof holder casing made ofpolypropylene. Prewired with vacuumpressure impregnated copper ballasts, powerfactor improvement capacitor, starters andmains connector.

CABLE ENTRY:Is through a 19 mm dia single compressioncable gland provided on the side of theluminaire.

MOUNTING:Connecting pipe is provided with 2 nosbrackets for mounting.

APPLICATIONS:Ideal for industries where vapour and dustyconditions prevail.

INDUSTRIALVAPOUR PROOF LUMINAIRE

IFV11


IP55

A B

C


7


Type No Watts A B C (Kgs) (Nos)LMA8IH/BC HPMV 1 80 240 0.43 375 180 270 4.6 2LMA12IH/BC HPMV 1 125 240 0.66 375 180 270 4.8 2LSA7IH HPSV 1 70 240 0.46 375 180 270 4.9 2(NI&WI)

LUMINIARE:Housing is fabricated from CRCA MS sheetand finished in stove enamelled light grey fromoutside and white inside. A scientificallydesigned aluminium reflector enhances thephotometric efficiency. The controlgearcompartment houses a removable gear trayprewired with a copper wound polyesterballast, power factor improvement capacitor,and mains connector. Lamp compartment isfitted with a high transparency, clear acryliccover.

CABLE ENTRY:Is through a 10 mm rubber grommetted inleton the rear of the controlgear housing.

LOWBAY LUMINAIRE

IP43 LMA/LSA

MOUNTING:One no. M S bracket fitted on top of thehousing facilitates mounting

MAINTENANCE:Acrylic cover can be easily hinged for lampreplacement.

APPLICATIONS:Widely used for industrial application withrestricted mounting heights of 6 m such aswarehouses, storage areas, factory assemblylines, sport halls and railway platforms.

1. LSA7IH/NI: Use 70 W (I) HPSV lamp with inbuilt ignitor.2. LSA7IH/WI: Use 70 W (E) HPSV lamp without inbuilt ignitor.3. If required with ES holder suitable for E27 cap, use suffix ' ES' instead of ' BC' in Cat. Ref. of LMA 8IH/12IH.


A

B

C


8

IMB12/SMB12/MMB12


Lamp Cap Voltage Current Dimension (mm) Approx CaseCat Ref Size (V) (A) Wt lot

Type No Watts A B (Kgs) (Nos)IMB1225IH HPMV 1 250 E-40 240 1.32 425 564 6.3 8IMB1240IH HPMV 1 400 E-40 240 2.10 425 564 7.3 8SMB1215IH HPSV 1 150 E-40 240 0.7 425 564 6.3 8SMB1225IH HPSV 1 250 E-40 240 1.3 425 564 7.3 8SMB1240IH HPSV 1 400 E-40 240 2.10 425 564 8.0 8MMB1225IH MH 1 250 E-40 240 1.3 425 564 7.3 8MMB1240IH MH 1 400 E-40 240 2.10 425 564 8.0 8

LUMINAIRE:Comprises cast aluminium LM6 control gearcapsule in stove enamel finish & a spunaluminium reflector. The capsule houses acopper wound ballast, powerfactorimprovement capacitor and mains connector.An electronic ignitor is provided in HPSV/MH luminaires. A safety chain is provided onthe capsule.

REFLECTOR:Is electrochemically brightened and anodisedfor longevity and high photometricperformance. It is profiled to give wider lightdistribution to make it suitable for mediumheight and longer spacing.

CABLE ENTRY:Is through a 19 mm rubber grommetted sideinlet in the capsule. Incoming wires terminateon the mains connector inside the control gearcapsule.

MOUNTING:For suspension, an eye bolt is provided oncapsule cover. A rubber bushing helps indamping vibrations.

APPLICATIONS:Suitable for bays of medium height.Recommended for mounting heights between6. m to 8 m. Ideal for factories, warehouses,railway stations, workshops etc.

INDUSTRIAL INTEGRALMEDIUM BAY LUMINAIRE

IP 20 for reflectorIP 32 for control gear housing

A

B

SAFETY CH AIN


9


Type No Watts A B (Kgs) (Nos)IMB1225IH/P HPMV 1 250 E-40 240 1.32 536 586 9.0 8SMB1215IH/P HPSV 1 150 E-40 240 0.7 536 586 9.0 8SMB1225IH/P HPSV 1 250 E-40 240 1.3 536 586 10.0 8MMB1225IH/P MH 1 250 E-40 240 1.3 536 586 10.0 8

LUMINAIRE:Comprises diecast LM6 aluminium capsulein stove enamel finish & a spun aluminiumreflector. The capsule houses a copper woundballast, powerfactor improvement capacitorand mains connector. The reflector has a flatheat resistant and toughened glass enframedin a retaining ring with gasket. An electronicignitor is provided in HPSV/ MH luminaires.A safety chain is provided on the capsule.

REFLECTOR:Is electrochemically brightened and anodisedfor longevity and high photometricperformance. It is profiled to give wider lightdistribution to make it suitable for mediumheight and longer spacing.



APPLICATIONS:Suitable for bays of medium height.Recommended for mounting heights between5 m. to 7 m. ideal for factories, chemical /fertiliser plants etc. where dusty conditionsand vapours are present.

INDUSTRIAL INTEGRALMEDIUMBAY TOTALLYENCLOSED LUMINAIRE

IMB12/P, SMB12/P, MMB12/PIP54

A

B

SAFETY C HA IN



10

IHB12/SHB12/MHB12


Ty pe No Watts A B (Kgs) (Nos)IHB1225IH HPMV 1 250 E-40 240 1.32 496 530 6.3 8IHB1240IH HPMV 1 400 E-40 240 2.10 496 570 7.3 8SHB1215IH HPSV 1 150 E-40 240 0.70 496 530 6.3 8SHB1225IH HPSV 1 250 E-40 240 1.3 496 530 7.3 8SHB1240IH HPSV 1 400 E-40 240 2.1 496 570 8.0 8MHB1225IH MH 1 250 E-40 240 1.3 496 530 7.3 8MHB1240IH MH 1 400 E-40 240 2.1 496 570 8.0 8

LUMINAIRE:Comprises cast aluminium LM6 capsule instove enamel finish and a spun aluminiumreflector. The capsule houses a copper woundballast, powerfactor improvement capacitorand mains connector. An electronic ignitor isprovided in HPSV/ MH luminaires. A safetychain is provided on the capsule.

REFLECTOR:Is electrochemically brightened and anodisedfor longevity and high photometricperformance.


MOUNTING:For suspension, an eyebolt is provided oncapsule cover. A rubber bushing helps indamping vibrations.

APPLICATIONS:Ideal for use in industries where the mountingheight is more than 8 m, viz. fabrication shops,rolling mills, generator rooms in powerstations, work shops, aircraft hangars etc.

INDUSTRIAL INTEGRALHIGHBAY LUMINAIRE

IP 20

A

B

S AFE TY C HAIN

Available with vitreous enamelled reflectors, if required.Add suffix �/V� to the above Cat. Ref. Also available in non integral version.



11


Type No Watts A B (Kgs) (Nos)IHB1225IH/P HPMV 1 250 E-40 240 1.32 506 546 9.0 8IHB1240IH/P HPMV 1 400 E-40 240 2.10 506 584 10.0 8SHB1215IH/P HPSV 1 150 E-40 240 0.70 506 546 9.0 8SHB1225IH/P HPSV 1 250 E-40 240 1.30 506 546 10.0 8SHB1240IH/P HPSV 1 400 E-40 240 2.1 506 584 10.5 8MHB1225IH/P MH 1 250 E-40 240 1.30 506 546 10.0 8MHB1240IH/P MH 1 400 E-40 240 2.1 506 584 10.6 8

LUMINAIRE:Comprises a die cast aluminium LM6 capsulein stove enamel finish and spun aluminiumreflector. The capsule houses a copper woundballast, power factor improvement capacitorand mains connector. The reflector has a flat,heat resistant and toughened glass with rubbergasket. A safety chain is provided on thecapsule. An electronic ignitor is provided incase of HPSV/ MH luminaires.

REFLECTOR:Spun aluminium reflector is electrochemicallybrightened and anodised for longevity andhigh photometric performance.

CABLE ENTRY:Is through a 19mm rubber grommetted sideinlet in the capsule. Incoming wires terminateon the mains connector inside the control gearcapsule.


APPLICATIONS:Ideal for use in heavy engineering, chemicalindustries, fertiliser plants etc. where dustyconditions and vapours are present.Recommended for mounting heights above 8m.

INDUSTRIAL INTEGRALHIGHBAY TOTALLYENCLOSED LUMINAIRE

IHB12/P, SHB12/P, MHB12/PIP54

A

SAFETY CHAIN

BHINGING CHAIN



12

SHBT12 - HIGH EFFICIENCY


Type No Watts A B (Kgs) (Nos)SHBT1225IH HPSV-T 1 250 E-40 240 1.3 440 568 7.2 8

LUMINAIRE:Comprises cast aluminium LM6 capsule instove enamel finish and a spun aluminiumreflector. The capsule houses a copper woundballast, powerfactor improvement capacitor,anelectronic ignitor, and mains connector. Asafety chain is provided on the capsule.

REFLECTOR:Is electrochemically brightened and anodisedfor longevity and high photometricperformance. It is profiled to give a higherlumen package as compared to highbayluminaires using elliptical lamps.


MOUNTING:For suspension, an eyebolt is provided oncapsule cover. A rubber bushing helps indamping vibrations.

APPLICATIONS:Ideal for use in industries where the mountingheight is more than 8 m, viz. fabrication shops,rolling mills, generator rooms in powerstations, work shops, aircraft hangars etc.

INDUSTRIAL INTEGRALHIGHBAY LUMINAIRE FORTUBULAR LAMP

IP 20

A

BSAFETY CHAIN



13


Type No Watts A B (Kgs) (Nos)IMS1225IH HPMV 1 250 E-40 240 1.32 425 463 6.3 8IMS1240IH HPMV 1 400 E-40 240 2.10 425 463 7.3 8SMS1215IH HPSV 1 150 E-40 240 0.70 425 463 6.3 8SMS1225IH HPSV 1 250 E-40 240 1.30 425 463 7.3 8SMS1240IH HPSV 1 400 E-40 240 2.10 425 463 8.0 8MMS1225IH MH 1 250 E-40 240 1.30 425 463 7.3 8MMS1240IH MH 1 400 E-40 240 2.10 425 463 8.0 8

LUMINAIRE:Comprises of die cast aluminium LM6 sidemounted controlgear box and spunaluminium reflector. Prewired with copperwound polyester ballast, power factorimprovement capacitor and mains connector.Side mounted controlgear with removablegear tray facilitates easy maintenance andreplacement. An ignitor is provided in case ofHPSV/MH luminaires.A safety chain isprovided on the capsule.

REFLECTOR:Is electrochemically brightened and anodisedfor longevity and high photometricperformance. Batwing light distributionpermits wider spacing with higher verticleilluminance.

CABLE ENTRY:Is through one no. 3/4" BSC thread providedon controlgear box for cable gland.

MOUNTING:An eye bolt on top of the controlgear facilitatesmounting. A rubber bushing helps in dampingvibrations.

APPLICATIONS:Ideal for use in industries where the mountingheight is above 5.5 m.

INDUSTRIAL INTEGRALSIDE MOUNTED MEDIUMBAYLUMINAIRE

IP 20 IMS12/SMS12/MMS12

A

B


Crompton Greaves2000

INDUSTRIAL INTEGRAL SIDEMOUNTED TOTALLY ENCLOSEDMEDIUMBAY LUMINAIRE

IMS12/P, SMS12/P, MMS 12/P

LUMINAIRE:Comprises diecast aluminium LM6 sidemounted controlgear box and spun

ae

Cat RefTyp

IMS1225H/P HPSMS1215IH/P HPSMS1225IH/P HPMMS1225IH/P MH

CABLE ENTRY:Is through one no. 3/4� BSC threaded cableentry provided on controlgear box for cable

itatesping

nting

IP 54


aluminium reflector. Prewired with cowound polyester ballast,power fimprovement capacitor and mains connThe reflector has a flat heat resistant and tened glass with rubber gasket. Side moucontrolgear with removable gearfacilitates easy maintenance and replacemAn ignitor is provided in case of HPSVluminaires. A safety chain is provided ocapsule.

14

Lamp Voltage Current(V) (A)

e No WattsMV 1 250 240 1.32SV 1 150 240 0.7SV 1 250 240 1.30

1 250 240 1.30

pperctorctor.

oughntedtrayent.

/MHn the

gland.

MOUNTING:An eyebolt on top of the controlgear facilmounting. A rubber bushing helps in damvibrations.

APPLICATIONS:Ideal for use in industries where the mouheight is above 5.5 m.

Light Book

Dimension (mm) Approx CaseWt lot

A B (Kgs) (Nos)436 485 9.0 8436 485 9.0 8436 485 10.0 8436 485 10.0 8

A

B


15


Type No Watts A B (Kgs) (Nos)IHS1225IH HPMV 1 250 E-40 240 1.32 496 427 6.3 8IHS1240IH HPMV 1 400 E-40 240 2.10 496 470 6.3 8SHS1215IH HPSV 1 150 E-40 240 0.7 496 427 6.3 8SHS1225IH HPSV 1 250 E-40 240 1.3 496 427 7.3 8SHS1240IH HPSV 1 400 E-40 240 2.1 496 470 8.0 8MHS1225IH MH 1 250 E-40 240 1.3 496 427 6.3 8MHS1240IH MH 1 400 E-40 240 2.1 496 470 7.3 8

LUMINAIRE:Comprises die cast aluminium LM6 sidemounted controlgear box and spunaluminium reflector. Prewired with copperwound polyester ballast, power factorimprovement capacitor and mains connector.Side mounted controlgear having a removablegear tray facilitates easy maintenance andreplacement. An ignitor is provided in case ofHPSV/MH luminaires. A safety chain isprovided on the capsule.

REFLECTOR:Is electrochemically brightened and anodisedfor longevity and high photometricperformance.

CABLE ENTRY:Is through one no. 3/4� BSC thread providedon controlgear for cable gland.

MOUNTING:An eye bolt on top of the controlgear facilitatesmounting.

APPLICATIONS:Ideal for use in industries where the mountingheight is more than 8 m ; viz. fabrication shops,rolling mills, generator rooms, workshops,aircraft hangars etc.

INDUSTRIAL INTEGRALSIDE MOUNTEDHIGHBAY LUMINAIRE

IP 20 IHS12/SHS12/MHS12

For luminaire with vitreous enamelled reflector, please add '/ V' to Cat.Ref.

A

B



16


Type No Watts A B (Kgs) (Nos)IHS1225IH/P HPMV 1 250 E-40 240 1.32 506 443 9.0 8IHS1240IH/P HPMV 1 400 E-40 240 2.10 506 486 9.0 8SHS1215IH/P HPSV 1 150 E-40 240 0.7 506 443 9.0 8SHS1225IH/P HPSV 1 250 E-40 240 1.3 506 443 10.0 8SHS1240IH/P HPSV 1 400 E-40 240 2.1 506 486 10.7 8MHS1225IH/P MH 1 250 E-40 240 1.3 506 443 10.0 8MHS1240IH/P MH 1 400 E-40 240 2.1 506 486 10.0 8

LUMINAIRE:Comprises a diecast aluminium LM6 sidemounted controlgear box in stove enamelfinish and spun aluminium reflector. Prewiredwith copper wound polyester ballast, powerfactor improvement capacitor and mainsconnector. The reflector has a flat, heat resistantand toughened glass with rubber gasket. Sidemounted controlgear housing having aremovable gear tray facilitates easymaintenance and replacement. An ignitor isprovided in case of HPSV/MH luminaires. Asafety chain is provided on the capsule.

REFLECTOR:Is electrochemically brightened and anodisedfor longevity & high photometricperformance.

CABLE ENTRY:Is through one no. 3/4" BSC thread providedon the control gear box for cable gland.

MOUNTING:Eye bolt on top of the controlgear boxfacilitates mounting. A rubber bushing helpsin damping vibrations.

APPLICATIONS:Ideal for use in industries where mountingheight is more than 8 m and in heavy engin-eering, chemical industries, fertiliser plantsetc. where dusty conditions and vapours arepresent.

INDUSTRIAL INTEGRAL SIDE MOUNTEDTOTALLY ENCLOSED HIGHBAY LUMINAIRE

IHS12/P, SHS12/P, MHS12/P

A

B


IP54


17

INDUSTRIAL INTEGRAL SIDEMOUNTED HIGHBAY LUMINAIRE

IP 20 SHST12 - HIGH EFFICIENCY

LUMINAIRE:Comprises diecast aluminium LM6 sidemounted controlgear box and spunaluminium reflector. Prewired with copperwound polyester ballast,power factorimprovement capacitor,an electronic ignitorand mains connector. Side mountedcontrolgear with removable gear trayfacilitates easy maintenance and replacement.A safety chain is provided on the capsule.

REFLECTOR:Is electrochemically brightened and anodisedfor longevity and high photometricperformance. It is profiled to give a higherlumen package as compared to highbayluminaires using elliptical HPSV lamps.

CABLE ENTRY:Is through one no. 3/4� BSC thread providedon control gear box for cable gland.

MOUNTING :An eyebolt on top of the controlgear facilitatesmounting. A rubber bushing helps in dampingvibrations.

APPLICATIONS:Ideal for use in industries where the mountingheight is more than 8 m; viz fabrication shops,rolling mills, generator rooms, workshops,aircraft hangars etc.

Lamp Voltage Current Dimension (mm) Approx CaseCat Ref (V) (A) Wt lot

Type No Watts A B (Kgs) (Nos)SHST1225IH HPSV-T 1 250 240 1.30 440 568 7.2 8

A

B



18

Lamp Cap Voltage Current Dimension (mm) Approx Case

Cat Ref Size (V) (A) Wt lot

Type No Watts A B C (Kgs) (Nos)IBH1110/BC GLS 1 100 B22d 230 0.43 194 126 117.5 0.85 12

(2 PIN)

LUMINAIRE:Comprises rugged cast aluminium LM6 bodyin stove enamel finish and fitted with a heatresistant elegant glass cover through a gasket.A two pin BC porcelain holder is fitted insidethe housing. An electrogalvanised M.S wireguard ensures protection against pilferage.Glass and wire guard assembly is hinged tothe body for ease of maintenance.

CABLE ENTRY:Is through one no. 3/4" B.S. threaded inlet.Incoming wires terminate on the lamp holderterminals.

MOUNTING:Two nos. lugs with 7 mm dia slots facilitatewall/ceiling mounting.

APPLICATIONS:The luminaire is of weatherproofconstruction and is suitable for securitylighting in industries, housing colonies/staircases etc.

INDUSTRIAL BULKHEADLUMINAIRE

IBH11

If required with ES holder suitable for E27 cap, use suffix ' ES' instead of ' BC' in Cat.Ref.


IP43

A B

C


19


Type No Watts A B (Kgs) (Nos)IWV1208/BC HPMV 1 80 B-22d 240 0.43 200 275 1.1 6

(3pin)IWV1212/BC HPMV 1 125 B-22d 240 0.66 200 275 1.1 6

(3pin)IWV1210/BC GLS 1 100 B-22d 230 0.43 200 275 1.1 6

(2pin)SWV1207 HPSV 1 70 E-27 240 0.40 200 275 1.1 6IWV1120/BC GLS 1 200 B-22d 250 0.80 227 280 1.5 6

(2pin)MLL 1 160 B-22d 230 0.72 227 280 1.5 6

(2pin)SWV1115 HPSV 1 150 E-40 240 0.7 230 365 2.50 6SWV1110 HPSV 1 100 E-40 240 0.46 230 365 2.50 6

LUMINAIRES:IWV12 and IWV11 comprises a diecastaluminium LM6 canopy in stove enamelfinish. SWV1115 has a diecast aluminiumLM6 canopy. A heat resistant wellglass withgasket ensures dust/jet proofness. Forprotection of glass, a galvanised wire guard isprovided. Well glass is fitted and adequatelygasketed to the canopy by means of retainingclamps.

CABLE ENTRY:Is through one no. 3/4" BSC inlet on top ofthe canopy.

MOUNTING:The inlet on top of the canopy facilitatesmounting on a suspension pipe.

APPLICATIONS:Ideal for use in cement plants, power plants,steel plants & material handling plants.

INDUSTRIAL NON INTEGRALWELLGLASS LUMINAIRE

IWV12/SWV12/IWV11/SWV11IP55 IWV11/SWV11IP65 IWV12/SWV12

1.Use appropriate control gear box when used with HPMV/HPSV lamps. Above luminaires are also available with external stove enamelledor vitreous enamelled or powder coated reflectors on request.2.Please note: IWV12 is not suitable for 200 W GLS & 160 W MLL lamps.3.If required with ES holder suitable for E27 cap, use suffix ' ES' instead of ' BC' in Cat.Ref.


A

B

A

B

SWV1115IWV1208


20

LUMINAIRE:Comprises a diecast aluminium LM6 canopyand controlgear compartment in stove enamelfinish. A heat resistant well glass with gasket,ensures dust/ jet proofness. A diecast LM6controlgear compartment houses copperwound ballast, powerfactor improvementcapacitor, an electronic ignitor (for HPSVonly)and mains connector. Wellglass andcontrolgear compartments are coupledthrough a brass nipple and checknut. Forprotection of glass, a galvanised wire guard isprovided.

CABLE ENTRY:Is through one no. 3/4" BSC cable gland oncontrolgear compartment.

MOUNTING:MS brackets are provided for wall/ceilingmounting.

APPLICATIONS:Virtually universal in industries, powerstations, cement plants, material handlingplant and outdoor/semi outdoor lightingwhere a compact, easy to mount luminaire isrequired.

INDUSTRIAL INTEGRALWELLGLASS LUMINAIRE

IWV13 / SWV13 / SWV11

1. SWV1307IH /NI: Does not have electronic ignitor in controlgear housing. Hence has to be used with 70W (I) HPSV lamp having inbuiltignitor. SWV1307IH/WI: Has electronic ignitor in controlgear housing. It should be used with 70 W (E) HPSV lamp without inbuiltignitor.2. Above luminaires are also available with external stove enamelled or vitreous enamelled or powder coated reflectors on request.3. If required with ES holder suitable for E27 cap, use suffix ' ES' instead of ' BC' in Cat.Ref.4. SWV1115IH has an IP 55 degree of protection.

A

B

C

D

Lamp Cap Voltage Current Dimension (mm) Approx Case Cat Ref Size (V) (A) Wt lot

Type No Watts A B C D (Kgs) (Nos)IWV1308IH/BC HPMV 1 80 B22d 240 0.43 317 200 338 125 3.8 6

(3pin)IWV1312IH/BC HPMV 1 125 B22d 240 0.66 317 200 338 125 3.9 6

(3pin)SWV1307IH HPSV 1 70 E-27 240 0.46 317 200 338 125 3.9 6(NI or WI)

SWV1115IH HPSV 1 150 E-40 240 0.70 415 230 454 137 7.8 6

IP65



21

INDUSTRIAL NON-INTEGRALMEDIUM/HIGHBAY RECESSEDBAYLITE LUMINAIRE

LUMINAIRE:Comprises body made from CRCA MS sheetin white powder coated finish and enclosing apre-anodised bright hammered finish highpurity aluminium reflector. The opticalsystem is scientifically designed with twopredefined lamp positions for medium &highbay applications . A flat heat resistant andtoughened glass is firmly fixed with syntheticrubber gasket by means of 4 nos. screws & fishbone spring. The luminaire houses a lampholder and mains connector.

MSBR/HSBR

Above luminaires are also suitable for 250/400W HPSV-T lamps.


Type No Watts A B C (Kgs) (Nos)MSBR25 MH-T 1 250 240 3.0 397 218 157 3.0 1MSBR40 MH-T 1 400 240 4.30 397 218 157 3.0 1HSBR25 MH-T 1 250 240 3.0 397 218 157 3.0 1HSBR40 MH-T 1 400 240 4.30 397 218 157 3.0 1

A

B

C

CABLE ENTRY:Is through one no. 3/4� BSC cable glandprovided on the side of the luminaire.

MOUNTING :MS plated bracket fixed on top of theluminaire facilitates mounting.The luminaireto be mounted before panneling

RELAMPING:Can be easily done by hinging the front glassfor lamp replacement and maintenance.

APPLICATIONS:Ideally suitable for indoor sports stadium,petrol pump lighting etc.


IP 55


22

INDUSTRIAL NON-INTEGRALMEDIUM/ HIGHBAYBAYLITE LUMINAIRE

LUMINAIRE:Comprises body made from CRCA MS sheetin white powder coated finish and enclosing apre-anodised bright hammered finish highpurity aluminium reflector. The opticalsystem is scientifically designed to providetwo different light distributions suitable formedium and highbay applications with twolamp positions. A flat heat resistant andtoughened glass is firmly fixed with syntheticrubber gasket by means of 4 nos. screws & fishbone spring. The luminaire houses a lampholder and mains connector in the cast Alterminal box.

Above luminaires are also suitable for 250/400W HPSV-T lamps.

MSB/HSB


Type No Watts A B C (Kgs) (Nos)MSB25 MH-T 1 250 240 3.0 367 188 157 3.0 1MSB40 MH-T 1 400 240 4.30 367 188 157 3.0 1HSB25 MH-T 1 250 240 3.0 367 188 157 3.0 1HSB40 MH-T 1 400 240 4.30 367 188 157 3.0 1

A

B

C

CABLE ENTRY:Is through one no.10mm rubber fitted to theterminal box.

MOUNTING :MS plated bracket fixed on top of theluminaire facilitates mounting.

RELAMPING:Can be easily done by hinging the front glassfor lamp replacement.

APPLICATION:Ideally suitable for factories, storage areas,loading bays, railway platforms, cargo/baggagehandling areas of airports, indoor sportsstadium.


IP 55


23

MSB/HSB

INDUSTRIAL INTEGRALMEDIUM/ HIGHBAYBAYLITE LUMINAIRE

IP 54

LUMINAIRE:Comprises lamp housing made from CRCAMS sheet in white powder coated finish andenclosing a pre-anodised bright hammeredfinish high purity aluminium reflector. Theoptical system is scientifically designed withtwo predefined lamp positions for medium & highbay applications. A flat heat resistantand toughened glass is firmly fixed withsynthetic rubber gasket by means of 4nos.screws & wish bone spring. The die castaluminium control gear capsule finished instove enamelled hammer tone grey houses acopper wound polyester ballast, power factorimprovement capacitor, electronic ignitor andmains connector.

CABLE ENTRY:Is through one no. dia 19mm hole with rubbergrommet provided on control gear capsule.

In case of luminaire suitable for 250/400 W HPSV-T lamps, replace suffix �/MH� in the Cat. Ref. by �/S�.


Type No Watts A B C (Kgs) (Nos)MSB25IH/MH MH-T 1 250 240 1.3 367 188 435 9.5 1MSB40IH/MH MH-T 1 400 240 2.1 367 188 435 10.2 1HSB25IH/MH MH-T 1 250 240 1.3 367 188 435 9.5 1HSB40IH/MH MH-T 1 400 240 2.1 367 188 435 10.2 1

MOUNTING :An eyebolt on top of the luminaire facilitatesmounting . A rubber bushing helps in dampingvibrations.

RELAMPING:Can be easily done by hinging the front glassfor lamp replacement and maintenance. Topcover of CG capsule can be hinged to facilitatemaintenance of accessories.

APPLICATIONS:Ideal for factories, storage areas, loading bays,railway platforms, cargo /baggage handlingareas of airports, indoor sports stadium etc.

A

B

C


industrial general purpose slim luminaire ip 20 …jpsdpl.com/cg/industrial.pdf · crompton greaves...

Documents