instructions for use and maintenance

Optifi re 1 01/09

Optifi re

07DHOPFV2

Instructions for useand maintenance

Caution: Remove the instructions from the fi replace and give them to the client, along with the necessary instructions (explanations and

demonstrations).

2 Opti-

For the chimney sweep, tick the correct position of the baffl es (see 1.5).

Optifi re 3

MEMO (to be completed by the installer)

* APPLIANCE TYPE OPTIFIRE*REFERENCE:OPTI700 :OPTI760 :OPTI760DF:

* DATE OF PURCHASE: ..... / ..... / .....

* SERIAL NUMBER:(visible on the fi replace’s identifi cation label, see page 4 no.11 Description of elements)…………………………………………………

*DISTRIBUTOR:

Name .........................................................

Street / No. ...................................................Town ...............................................

Postcode .............................................

Tel. ...........................................................

Note:Your supplier is the specialist chosen by BODART & GONAY to represent your region.

For your safety and satisfaction, we recommend that you have them carry out your installation

All local and national regulations and European standards must be observed when installing and using the appliance.

If, however, you wish to carry out the installation yourself, to avoid any surprises, we recommend that you:- consult the terms of our guarantee agreement,- seek advice from your supplier.

Dear Client,

We congratulate you on the purchase of your Bodart & Gonay fi replace.We are happy to inform you that you have chosen a quality product wholly designed and manufactured by our company, using the most up-to-date production techniques.

To get the best use out of your appliance, we strongly recommend that you read these instructions carefully and keep them safe.

Also keep your proof of purchase safe, as it will be used to determine the guarantee period.

We wish you lots of pleasure and warmth around your Bodart & Gonay fi replace.

Customer Services.

Concerning installation, given the impossibility of covering every particular case that might arise, we will confi ne ourselves to the most important points.

4 Opti-

OK!

CONTENTS RECOMMENDATIONS 1. Fuel 4 2. First fi re 4 3. With each fi re 4 1. Use: 5 1.1. Description of elements 5 1.2. Opening – closing the fi replace 6 1.3. Fire behaviour 6 1.3.1. Lighting 7

1.3.2. Ideal rate 7

1.3.3. Reduced rate 8

1.4. Operating with coal (occasional) 8 1.5. Adjusting baffl es 9 1.6. Fans and speed variator 10 2. Maintenance: 11 2.1. Everyday maintenance 11 2.2. Annual servicing 12 3. Faults 13 4. Spare parts 14 5. Guarantee 23

RECOMMENDATIONS1. Fuel:

This appliance burns (well dried!) wooden logs and logs of compressed wood shavings.

Do not put too much wood in at once.You can also use briquettes.

This appliance may not under any circumstances be used as an incinerator!

2. First fi re:

Bakes the paint, which causes a release of fumes and odours.

Ventilate the room! Do not touch the paint until the fi replace has cooled down, as initially it softens

before hardening for good.

3. With each fi re:

- Close the door of the ash box- Position the grill properly depending on the fuel- Turn on the fan (except for minimum rate)

It can also occasionally burn coal (anthracite or lean coal) of 12/22 or 20/30 grade.It is prohibited, however, to burn coke or other fuels containing sulphur.

Optifi re 5

6 8 17 5 3 4 2

12

11

109

1. The gate: Never leave it open when the appliance is in operation

2. The thermostat: It regulates the quantity of primary air for combustion according to its position. Its valve closes and opens according to the temperature of the combustion chamber. Its control knob is telescopic to facilitate operation.

3. The ashtray door: It gives access to the ashtray and to the deashing arm. It must always be closed during a fi re (otherwise the combustion air is no longer under control and the fi re fl ares up -> overheating of appliance).

4. The deashing arm :To use it, pull it towards you. It is used to adapt the fi replace to the type of fuel (left-hand position: open grill for coal; right-hand position: closed grill for wood). Deashing is done by moving it from right to left.

5. The ashtray: In the form of a shovel to enable collection of ashes right at the bottom of the appliance. Monitor the amount of ash in the ashtray and empty it before it overfl ows.

6. Door lock and removable handle: With the gate closed, place the removable handle in the hole in the door latch to open and close.

7. Microswitch: A switch that automatically stops the fan on opening the door.

8. Fireplace identifi cation label

9. Log-guard: For safety.

10. Refractory bricks or cast iron plates: a natural material that protects the heating unit whilst limiting variations in temperature.

11. Baffl es: Made of heat-resisting stainless steel, they lengthen the path of fumes optimising secondary combustion and increasing heat transfer. They enable the fi replace to be adapted to the draught of the chimney.

12. Inner door: These are hardwearing stainless steel seals, to guarantee air tightness of the door and trouble-free clearing of smoke from the glass.

13. Distributors: They enable regular distribution of primary air.

14. Grills: They are made of heat-resisting cast iron, and the upper grill is operated by the deashing arm.

1. Use: 1.1. Description of elements

6 Opti-

OK!

1

3

2

15. The variator: It enables adjustment of fan speed. 1. Speed adjustment. 2. Minimum speed adjustment screw under the

knob 3. Fuse (Remove the knob, unscrew the plate,

remove old fuse, replace with identical fuse).

1.2. Opening – closing the door

1.3. Fire behaviour

Quality wood is: - Dry wood that has been drying for at least 2 years in a ventilated

sheltered area.

- Use logs from broad-leaved trees in preference to those from coni-fers, which tend to burn quickly and produce lots of soot. In order of preference: hornbeam, oak, beech...

- It is also possible to use logs of compressed wood shavings and bri-quettes.

An excessive load of wood leads to: - A reduction in yield and an increase in wood consumption. - A signifi cant loss of heat through the chimney. - Premature ageing of the fi replace and chimney fl ue.

During the fi re, open the door slowly. Opening it suddenly causes a temporary backdraft in the fi replace.

To close the door: lift the handle, press the door against the heating unit so that the seal is gently compressed, then lower the handle until it is locked.

It is normal for the fan to cut out when opening the door.

The quality and the drying of the wood are of prime importance for the fi replace to operate at its best

(heater power and yield, cleanliness of glass).

Do not forget to calibrate the variator; refer to the installation manual in options 6.

Optifi re 7

1.3.2. Ideal rate for good yield

1. Choose split logs (1or 2 depending on the quantity of heat needed)2. Try to pile them in staggered rows to encourage gas exchanges.3. Put the thermostat on 7-8.4. Put the fan on maximum.

A sign of good combustion with wood, after a phase of degassing where the fi replace interior turns black, during the actual combustion, this black tar must be burned and the fi replace interior must appear clear, then blacken again with the following load and then be reburned once again.

1.3.1. Lighting

1. OPEN the air control to maximum: Thermostat 9.Place the grill in open position (lever to the left).2. Lay fi relighter or crumpled-up newspaper.Finish off with kindling.The use of infl ammable liquids is prohibited.3. Set light to it.4. To avoid condensation of fumes on the glass and to facilitate starting the fi re: Leave the door slightly ajar to prevent the glass sooting up, as its still too low temperature causes condensation and deposit of particles.5. Wait for the kindling to be well lit before LAYING the fi rst logs, choosing the smallest ones fi rst.6. As soon as there are strong fl ames and the glass is suffi ciently warm, close the door completely.7. When the fi re is blazing, close the grill and the ashtray and start the fan (Variator "ON" see 1.6).8. When the appliance is hot, adjust the thermostat to the required position.9. Adapt the fan speed to the quantity of hot air you need.

For better yield, it is best to have the thermostat on 7-8 and load log-by-log depending on the quantity of heat you need.

This also enables you to keep the glass, bricks and chimney cleaner.Also ensure that you close the baffl es as far as possible and ideally put in place the third baffl e

if your chimney allows it (see 1.5 Adjusting baffl es).

Maximum permitted load at maximum rate:

Model OPTI700 OPTI760 OPTI760DFMaximum load (for reduced rate):

9Kg 11Kg 11Kg

Recommended load for 1 hour at maxi-mum rate:

3,5Kg 4,5Kg 3,68Kg

8 Opti-

1.3.3. Reduced rate and long-lasting combustion

Maximum permitted load in one go at reduced rate (see previous table).1. Keep a 3 to 5 cm bed of embers at the bottom of the fi replace.2. Choose logs with a very wide section.3. Position the thermostat according to the draught of your chimney. A redu-ced rate is generally achieved between 0 and 3.This kind of load can only be used at reduced rate, to produce a long-lasting fi re.Piling logs in parallel encourages a long-lasting fi re. Add more logs when there are only embers left, just after the last fl ames die out.

Continuous use at reduced rate may, through condensation, cause an accumulation of soot in the chimney, and thereby a risk of chimney fi re, and dirty the glass more quickly.

Avoid reduced rate during unfavourable atmospheric conditions (low pressure and high humi-dity), as there is a risk of backdraft.

1. Position the GRILL in OPEN position.

2. OPEN the air control to maximum: THERMOSTAT 9.

3. Lay crumpled (non-glazed) paper and KINDLING in the fi replace.

4. SET LIGHT TO IT.

5. Leave the door slightly AJAR to prevent the glass sooting up, as its still too low temperature causes condensation and deposit of particles.

6. As soon as the GLASS is suffi ciently HOT, CLOSE THE DOOR.

7. START the FAN in MEDIUM POSITION (see 1.6).

8. Put the coal WITHOUT SPREADING IT OUT on the grill.

9. When the fi re has penetrated the mass (appearance of fl ames), add a SECOND LOAD.

10. Allow the fi re to continue to progress before reducing GRADUALLY the air intake up to the position corresponding to the calorifi c requirement.

11. ADJUSTING FAN SPEED.

Use coal only in an casual way.Use coal (anthracite or lean coal) of 12/22 or 20/30 grade.Fuels containing sulphur, like coke and its by-products for example, are prohibited.

1.4. OPERATING WITH COAL

NB. Do not use the appliance with coal in mild weather. As the draught and rate are reduced, combus-tion is liable to become incomplete.

Optifi re 9

!

MAX.

MINI.

OFF= O

60

15

30

45

OOFF=

ON

O

CAUTION!When the fi replace is being used, and even if there are no more fl ames, certain accessible parts of the appliance are at very high temperatures.

Do not leave children unsupervised near the fi replace.

1.6. Fans and speed variator

Caution ! The fan is engaged when the temperature switch is hot (+ 20 min.)

10 Opti-

Prohibited position:

Most closed position: if there is still no backdraft in intermediate position, close it fully to always have the best yield the fi replace can give in relation to the chi-mney.

Third baffl e: if there is still no backdraft in closed position, you can install the third baffl e. Again with the aim of obtai-ning the best yield the fi replace can give in relation to the chimney.

Intermediate position: if no backdraft is observed on opening, it is possible to close the baffl es slightly to increase yield.

Caution: lower baffl e perforations on right, turn baffl e round.

Most open position: the fi replace is delivered with this confi guration. It allows easy passage of fumes.

Caution: lower baffl e perforations on left.

1.5. Adjusting baffl es:

Optifi re 11

Most open position: the fi replace is delivered with this confi guration. It allows easy passage of fumes.

Intermediate position: if no backdraft is observed on opening, it is possible to close the baffl es slightly to increase yield.

Most closed position: if there is still no backdraft in intermediate position, close it fully to always have the best yield the fi replace can give in relation to the chi-mney.

Except: OPTI 760 D

12 Opti-

CAUTION!- Do not clean the glass when it is hot.- Spray the product* on the centre of the glass, then spread it using a cloth or absorbent paper.- Do not use water and/or cleaning products on the painted areas.- For stubborn marks, it is possible to use a blade for scraping ceramic hobs.- Cleaning the glass is easier if done regularly.

*We recommend use of the cleaning product “BG Clean”, available from your dealer. “BG Clean” does not contain caustic soda and is biodegradable.

ASHTRAY DOORCheck the condition of the seal and if necessary replace it to ensure air tightness. Degradation of this seal leads to poor fi re control and reduction in yield. Check the operation of the spring clips.

AIR DISTRIBUTORSWhere necessary, unblock the air inlet holes of the front distributor with a vacuum cleaner, as well as those situated on both sides of the grill, which can easily be removed to facilitate the operation.

GRILLSMake sure that there are no obstacles restricting their movement.

DUST FILTERS (if there are any, they are level with the air inlets)Clean them with a vacuum cleaner and, where necessary, with water. New fi lters can be obtained form your supplier.

THERMOSTATCheck that it turns properly.Your supplier is authorised to check the setting.

DOORCheck that the stainless steel seal is airtight.If necessary, your supplier can adjust and/or replace it. Check that both the lock and the opening safety work properly. This is in order to ensure good yield and clean glass.

2. Maintenance: 2.1. Everyday maintenance GLASSTo clean the glass, open the door using the following procedure:

Optifi re 13

PAINTING METAL PARTSDo not use water and/or cleaning products on the painted areas.Stained areas may be restored using special B&G high temperature aerosol paint, which is available from your dealer.

LUBRICATIONWith frequent use, it is recommended that the following parts be lubricated annually: - Door and gate: hinges and lock. - Thermostat: control shaft.

FAN (as option)UNPLUG the electricity supply, DISCONNECT the fan, and then REMOVE it. CLEAN the impeller blades using a brush (COMPRESSED AIR IS PROHIBITED). REASSEMBLE everything.

FIREPROOF BRICKSA split brick can still play a protective role. However, a missing piece must be replaced in order to main-tain eff ective protection of the heating unit. Bricks are wearing parts that can be easily replaced indivi-dually. You are advised to change parts that are too damaged.

CHIMNEY-SWEEPING

Have the chimney swept at least once a year, not only to comply with the law, but also for safety reasons.

- Take note of the position of the 2 baffl es.- Remove the baffl es, as shown in the drawing.

- If the third baffl e is installed, you must fi rst take down the 2 large baffl es, unscrew the third baffl e and remove it, then manoeuvre and remove the two large baffl es.

- Place the grill in closed position (wood).- Close the door, thermostat and ashtray door.- Simply clean up any fallen dust with a vacuum cleaner.

Take advantage of the chimney-sweeping to check the condition of the chimney and connections.

- Reposition the baffl es following the instructions in reverse, taking care to position them as before.

2.2. Annual servicing

DO NOT USE NORMAL LUBRICANT. At high temperatures the latter will dry out and cause seizing up. If necessary, clean the surfaces thoroughly, then apply a LUBRICANT RESISTANT TO HIGH TEM-

PERATURES, available from your dealer.

14 Opti-

3. FaultsFAULTS SOLUTIONS

GLASS GETS DIRTY TOO QUICKLY -Check that the fuel is not damp. - Use the thermostat on 7-8. - Check the position of the air detector. - Open the baffl e passage.

FAN Not working any more - Check if the motor is working. - Check the micro switch. - Check (and replace) the variator fuse. - Check the temperature switch (option). - Check (and restore) the power supply.

FAN Operates but the output is weak - Check that the wires of the speed variator are properly positioned. - Clean or replace the fi lters. - Clean the impeller blades.

DRAUGHT Too strong

Tighten the baffl e passage (see “Adjusting baffl es”) - Contact your supplier.

DRAUGHT Too weak, possibly with fumes leaking into the room

- Check the chimney (see installation instructions). - Remove any obstructions. - Open the baffl e passage. - Check if there is any improvement when the window is open. - Have the chimney swept.

Disruptions connected with weather conditions - If this condition is permanent, consult your supplier.

THE FIRE LACKS INTENSITY - Check that the fuel is not damp. - Check the thermostat (put it on 7-8 and check its move-ment). - Empty the ashtray. - Unblock the distributor holes.

THERMOSTAT NO LONGER CLOSES: - A foreign body is preventing the valve from closing - Mechanical blockage

- Remove the foreign body. - Replace the thermostat.

THERMOSTAT STAYS SHUT: 1. On COLD, the valve only raises from medium positions 2. On COLD, the valve does not raise any more

1) Recalibrate the setting. 2) Replace the thermostat (it has been damaged following major overheating of the fi replace).

UNCONTROLLABLE FIRE: - DOOR of ashtray open or not airtight - DOOR of fi replace not airtight - THERMOSTAT does not shut

- Check the ashtray door closes properly. - Check the seal, and replace it where necessary. - Readjust the door seal setting. - Readjust the position of the lock roller. - Check operation of the thermostat.

In the event of a CHIMNEY FIRE, close immediately the door and the ashtray door, turn off the thermostat.

Optifi re 15

4. Spare parts

16 Opti-

OPTIONS/RECHANGES/OPTIE/WISSELSTUKKEN OPTI 700Pièces de rechange / wisselstukken

Ref Code Description Omschrijving

01 07BP03 poignée fil 07BP0103 NOIRES ZWARTE KOUDE HANDGREEP02 27M70016 PORTE SOUDEE OPTI 700 PLAT GELASTE DEUR OPTI 700 VLAK03 07RV1050 CERAM. 596 X 497 X 4 OPTI 700 KERAM. 596 X 497 X 4 OPTI 70004 27M70015 CONTREPORTE OPTI 700 PLAT TEGENDEUR OPTI 700 VLAK05 27660002 FERMETURE IF 96 SLUITING IF 9606 27660000 ACCROCHE CLENCHE IF 96 HENDEL VANGER IF 9607 37M70014 CHICANE SUPERIEURE OPTI 700 626 x 166,6-75 BOVENSTE ROOKAFREMMER OPTI 70008 37M70015 CHICANE INFERIEURE OPTI 700 626 x 221 ONDERSTE ROOKAFREMMER OPTI 70009 07CB300 BRIQUE 240X120X30 VT20 VUURV.STEEN 240X120X30 VT2010 07CB315 BRIQUE 300X150X30 VUURV. STEEN 300X150X3011 07CB344 BRIQUE 300X90X30 VUURV. STEEN 300X90X3012 07CB313 BRIQUE 240X60X30 (BISEAUTEE) VUURV.STEEN 240X60X30 KANTG.13 07CB326 BRIQUE 150X60X30 BISEAUTEE VUURV.STEEN 150X60X30 KANTG.14 07CB325 BRIQUE 180X60X30 BISEAUTEE VUURV.STEEN 180X60X30 KANTG.15 07CB327 BRIQUE 120X60X30 BISEAUTEE VUURV.STEEN 120X60X30 KANTG.16 07FFIFG SA-PAIRE GRILLES IF-GAUMAIS-POELE VUURROOSTER INFIRE GAUMAIS-KACHEL17 37B78013 BUTEE GRILLE AVANT OPTI 780 VOORSTE ROOSTER BLOK OPTI 78019 37M70034 PAIRE DE REPARTITEUR OPTI 700 PAAR LUCHTVERDELERS OPTI 70020 37M70035 CANAUX D'AIR FOND OPTI 700 LUCHTKANALEN BODEM OPTI 70022 37M70029 BARREAU PARE BUCHE OPTI 700 BLOKKENHOUDER OPTI 70023 37660016 SUPPORT BARREAU-CHENET IF 96 STEUN BLOKKENHOUDER IF 9624 37M70016 DEFLECTEUR OPTI 700 PLAT LUCHTDEFLECTOR OPTI 700 VLAK25 37B78006 SUPPORT GRILLES OPTI 780 ROOSTER SUPPORT OPTI 78026 37B78008 CENDRIER OPTI 780 ASLADE OPTI 78027 37B78007 BRAS DECENDRAGE OPTI 780 ROOSTERSTANG OPTI 78028 27B78014 CAISSON CENDRIER OPTI 780 ASLADE AFSLUITPLAAT OPTI 78029 07PBE001 SACLIPS PORTE CENDRIER D950207 VEERKLEM ASLADE DEUR30 37B78009 PORTE CENDRIER OPTI 780 ASLADE DEUR OPTI 78031 07FTS690 THERMOSTAT DIA90 TELESCOPIQUE THERMOSTAAT Ø90 TELESCOPISCH33 07PBB049 POUSSOIR CADRE IF 60 VH KADER DRUKKNOP IF 60 VH36 37116226 FIXATION SONDE BEVESTIGING HAARBUISJE37 37B77016 STABILISATEUR OPTI 780-700 (SOUVERAIN) SOEVEREIN STABILISATOR38 37117400 BUSELOT AIR CHAUD DIA 125 WARMELUCHTBUISJE DIA 12539 07VM0200 BUSELOT RACCORD.CHEMINEE DIA 200 INOX AANSLUITINGSBUISJE DIA 20040 37M70033 TROISIEME CHICANE OPTI 700-760 DERDE ROOKAFREMMER OPTI 700-76042 37M70003 PAIRE PIEDS OPTI 700 PAAR VOETEN OPTI 700

Options / optiesRef Code Description Omschrijving

01 37B78005 KIT GRIL BARBECUE OPTI 780 - OPTI 700 kIT BARBECUE OPTI 780- OPTI 70034 27M70027 PORTILLON CADRE 3 C. OPTI 700 DEURTJE 3Z KADER OPTI 70034 27M70026 PORTILLON CADRE 4 C. OPTI 700 - 760 DF AFDEKPLAAT4 Z KADER OPTI 700 - 760 DF41 07EEG006 SA - MICROSWITCH 831611 IW3 + 161L UL MICROSWITCH MET DRUKKNOP43 37B78004 BOITIER ELECTRIQUE OPTI 780 ELEKTRISCH KASTJE OPTI 78044 37660050 THERMOCONTACT MONTE 2006 GEMONTEERD THERMOCONTACT 200645 37M70011 CADRE HAB. 3 COTES OPTI 700 3Z KADER OPTI 70045 37M70018 CADRE 4 COTES PLAT OPTI 700 4 ZIJ. KADER VLAK OPTI 70046 37B77021 KIT VENTILATION 450 M3 VENTILATIE KIT 750 M3 PHENIX47 37B78024 HARNAIS OPTIFIRE 780 SAV OPTIFRE 780 KABELSET48 37660078 KIT VARIATEUR blanc ENCASTRABLE IF96 KIT INBOUWDIMMER IF96

Imprimé, le 16/10/2007

Optifi re 17

18 Opti-

OPTIONS/RECHANGES/OPTIE/WISSELSTUKKEN OPTI 760Pièces de rechange / wisselstukken


01 27B78016 PORTE SOUDEE OPTI 780 PLAT GELASTE DEUR OPTI 780 VLAK01 27B78017 PORTE SOUDEE CINTREE OPTI 780 GEBOGEN GELASTE DEUR OPTI 78002 27B78015 CONTREPORTE OPTI 780 PLAT TEGENDEUR OPTI 780 VLAK02 27B78021 CONTREPORTE OPTI 780 CINTREE TEGENDEUR OPTI 780 AFGERONDE03 07RV1039 CERAM. 656X487X4 OPTI 780 + OPTI 760 DF KERAM. 656X487X4 OPTI 780/760/760D03 07RV1041 CERAM.R.900 DEV.638 H.490 EP.4 KERAM.R.900 DEV.638 H.490 EP.4 Opti 78004 27660002 FERMETURE IF 96 SLUITING IF 9604 27B78022 FERMETURE PORTE CINTREE OPT780 SLUITING GEBOGEN DEUR OPTI 78005 07BP03 MAIN FROIDE NICKEL.IF96+PRISMA ZWARTE KOUDE HANDGREEP06 27660000 ACCROCHE CLENCHE IF 96 HENDEL VANGER IF 9607 37B78014 CHICANE SUPERIEURE OPTI 780 686 x 166,6-75 BOVENSTE ROOKAFREMMER OPTI 78008 37B78015 CHICANE INFERIEURE OPTI 780 686 x 221 ONDERSTE ROOKAFREMMER OPTI 78009 07CB300 BRIQUE 240X120X30 VT20 VUURV.STEEN 240X120X30 VT2009 07FF0301 PLAQUETTE FONTE 240X120X30 GIETIJZER PLAATJE 240X120X3010 07CB315 BRIQUE 300X150X30 VUURV. STEEN 300X150X3010 07FF0305 PLAQUETTE FONTE 300X150X30 GIETIJZER PLAATJE 300X150X3011 07CB344 BRIQUE 300X90X30 VUURV. STEEN 300X90X3011 07FF0306 PLAQUETTE FONTE 300X90X30 GIETIJZER PLAATJE 300X90X3014 07CB325 BRIQUE 180X60X30 BISEAUTEE VUURV.STEEN 180X60X30 KANTG.15 07CB327 BRIQUE 120X60X30 BISEAUTEE VUURV.STEEN 120X60X30 KANTG.16 37B78013 BUTEE GRILLE AVANT OPTI 780 VOORSTE ROOSTER BLOK OPTI 78018 37B76034 PAIRE DE REPARTITEUR OPTI 760 PAAR LUCHTVERDELERS OPTI 76019 07FFIFG2 GRILLE ACIER CHR. SUP. LG 266 BOVENROOSTER+CHROME LG 26619 07FFIFG3 GRILLE FONTE INF. LG 300 ONDERROOSTER LG 30020 37B78007 BRAS DECENDRAGE OPTI 780 ROOSTERSTANG OPTI 78021 07PBE001 SACLIPS PORTE CENDRIER D950207 VEERKLEM ASLADE DEUR22 37B78009 PORTE CENDRIER OPTI 780 ASLADE DEUR OPTI 78023 37B78006 SUPPORT GRILLES OPTI 780 ROOSTER SUPPORT OPTI 78024 37B78008 CENDRIER OPTI 780 ASLADE OPTI 78025 27B78014 CAISSON CENDRIER OPTI 780 ASLADE AFSLUITPLAAT OPTI 78026 37660016 SUPPORT BARREAU-CHENET IF 96 STEUN BLOKKENHOUDER IF 9627 37B78029 BARREAU PARE BUCHE OPTI 780 BLOKKENHOUDER OPTI 78028 37B78016 DEFLECTEUR OPTI 780 PLAT LUCHTDEFLECTOR OPTI 780 VLAK28 37B78026 DEFLECTEUR AIR OPTI 780 CINTRE LUCHTDEFLECTOR OPTI780 ROND29 07FTS690 THERMOSTAT DIA90 TELESCOPIQUE THERMOSTAAT Ø90 TELESCOPISCH30 37116226 FIXATION SONDE BEVESTIGING HAARBUISJE31 37B77016 STABILISATEUR OPTI 780-700 (SOUVERAIN) SOEVEREIN STABILISATOR32 37117400 BUSELOT AIR CHAUD DIA 125 WARMELUCHTBUISJE DIA 12533 07VM0200 BUSELOT RACCORD.CHEMINEE DIA 200 INOX AANSLUITINGSBUISJE DIA 20034 07PBB049 POUSSOIR CADRE IF 60 VH KADER DRUKKNOP IF 60 VH35 37115018 TISONNIER POOK36 37M70003 PAIRE PIEDS OPTI 700 PAAR VOETEN OPTI 70037 07EEG006 SA - MICROSWITCH 831611 IW3 + 161L UL MICROSWITCH MET DRUKKNOP44 37B76035 PAIRE DE CANAUX AIR OPTI 760 PAAR LUCHTKANALEN OPTI 76045 37M70033 TROISIEME CHICANE OPTI 700-760 DERDE ROOKAFREMMER OPTI 700-760--- 37B78070 1/2 KIT FONTE OPTI 780 - 700 1/2 KIT GIETIJZER OPTI 780--- 37B78075 1/2 KIT BRIQUE OPTI 780/700 1/2 KIT STENEN OPTI 760/700


38 37660050 THERMOCONTACT MONTE 2006 GEMONTEERD THERMOCONTACT 200639 37B78004 BOITIER ELECTRIQUE OPTI 780 ELEKTRISCH KASTJE OPTI 78040 07EEVENC VARIATEUR A ENCASTRER(S.CABLE) INBOUW VARIATOR (Z.KABEL)41 37B78024 HARNAIS OPTIFIRE 780 SAV OPTIFRE 780 KABELSET42 37B78023 KIT VENTILATION OPTI 780 - 700 KIT VENTILATIE OPTI 700 - 760 - 16/9 (2006)43 37M76011 CADRE 3 COTES PLAT OPTI 760 DF 3Z VLAKKE KADER OPTI 76043 37B76018 CADRE 4 C. PLAT OPTI 760 + CACHE THERMOSTAT 4 ZIJ. KADER VLAK OPTI 76043 37M76020 CADRE 3 COTES CINTRE OPTI 760 DF 3 ZIJ.GEBOGEN BEKL.KAD.OPTI 760 DK--- 07EVDDA6 SA-VENTILATEUR DDL 133-200 (+ CONDENSATEUR 2µF) VENTILATOR DDL 133-200--- 3774H024 BOIT.FILT REPRISE 25X16 LAITON AANZUIGROOSTER KOPER 25X16--- 37B78005 KIT GRIL BARBECUE OPTI 780 - OPTI 700 kIT BARBECUE OPTI 780- OPTI 700--- 37B77032 CAISSON VENTILATION 450 M3 VENTILATIEKAST 750 M3--- 37M76027 KIT CLAPET PIVOTANT OPTI 760-760 DF SPILDRAAIENDE KLEP OPTI 760-760 DK--- 27B78029 PORTIL.CINTRE CADRE 3C OPTI780 ONDERDEUR OPTIFIRE 783/2

Optifi re 19

20 Opti-

OPTIONS/RECHANGES/OPTIE/WISSELSTUKKEN OPTI 760 DFPièces de rechange / wisselstukken


01 37B78017 PORTE MONTEE OPTI 780 PLAT VOLLEDIGE DEUR OPTI 760/101 27B78015 CONTREPORTE OPTI 780 PLAT TEGENDEUR OPTI 780 VLAK01 07RV1039 CERAM. 656X487X4 OPTI 780 + OPTI 760 DF KERAM. 656X487X4 OPTI 780/760/760D02 27660002 FERMETURE IF 96 SLUITING IF 9603 37B78016 DEFLECTEUR OPTI 780 PLAT LUCHTDEFLECTOR OPTI 780 VLAK04 27660000 ACCROCHE CLENCHE IF 96 HENDEL VANGER IF 9605 37M76018 CADRE 4 COTES OPTI 760 DF 4-ZIJDIGE KADER OPTI 760 DK05 27M70026 PORTILLON CADRE 4 C. OPTI 700 - 760 DF AFDEKPLAAT4 Z KADER OPTI 700 - 760 DF06 27M76034 CACHE THERMOSTAT OPTI 760 DF THERMOSTAAT BESCHERMING OPTI 760 DK07 37B76034 PAIRE DE REPARTITEUR OPTI 760 PAAR LUCHTVERDELERS OPTI 76008 37M76025 CHICANE INFERIEURE OPTI 760 DF ONDERSTE ROOKAFREMMER OPTI 760DK09 37B78009 PORTE CENDRIER OPTI 780 ASLADE DEUR OPTI 78010 37M76035 CANAUX D'AIR OPTI 760 DF LUCHTKANALEN OPTI 760DK11 37B78008 CENDRIER OPTI 780 ASLADE OPTI 78012 37660016 SUPPORT BARREAU-CHENET IF 96 STEUN BLOKKENHOUDER IF 9613 37B78029 BARREAU PARE BUCHE OPTI 780 BLOKKENHOUDER OPTI 78014 27B78014 CAISSON CENDRIER OPTI 780 ASLADE AFSLUITPLAAT OPTI 78015 37M76004 BRAS DECENDRAGE OPTI 760 DF ROOSTERSTANG OPTI 760 DK16 37116226 FIXATION SONDE BEVESTIGING HAARBUISJE17 37117400 BUSELOT AIR CHAUD DIA 125 WARMELUCHTBUISJE DIA 12518 07FTS690 THERMOSTAT DIA90 TELESCOPIQUE THERMOSTAAT Ø90 TELESCOPISCH19 07FFIFG SA-PAIRE GRILLES IF-GAUMAIS-POELE VUURROOSTER INFIRE GAUMAIS-KACHEL20 07CB327 BRIQUE 120X60X30 BISEAUTEE VUURV.STEEN 120X60X30 KANTG.22 07VM0200 BUSELOT RACCORD.CHEMINEE DIA 200 INOX AANSLUITINGSBUISJE DIA 20023 37M76032 COMPENSATION CORPS CHAUFFE OPTI 760 DF VULSTUK VERBRANDINGSKAMER OPTI 760 DK24 37M76045 CHICANE SUPERIEUR OPTI 760 DF BOVENSTE ROOKAFREMMER OPTI 760DK25 07CB352 BRIQUE 425X 150 X 30 BISEAUT.39/42% AL2O3 VUURV STEEN 425X150X30 KANTG 39/42% AL20326 07CB326 BRIQUE 150X60X30 BISEAUTEE VUURV.STEEN 150X60X30 KANTG.27 07CB354 BRIQUE REFRACT.220 X 60 X 30 VUURV STEEN 220 X 60 X 3028 37M76005 CALE BRIQUE OPTI 760 DF STEEN HOUDER OPTI 760 DK--- 07BP03 MAIN FROIDE NICKEL.IF96+PRISMA ZWARTE KOUDE HANDGREEP--- 37115018 TISONNIER POOK--- 07PBB049 POUSSOIR CADRE IF 60 VH KADER DRUKKNOP IF 60 VH--- 07PBE001 SACLIPS PORTE CENDRIER D950207 VEERKLEM ASLADE DEUR--- 37B78006 SUPPORT GRILLES OPTI 780 ROOSTER SUPPORT OPTI 780


01 37B78025 PORTE CINTRE MONTEE OPTI 780 VOLLEDIGE DEUR OPTI 780/201 37B78021 CONTREPORTE MONTEE OPTI780 CIN TEGENDEUR OPTI 780 ROND01 07RV1041 CERAM.R.900 DEV.638 H.490 EP.4 KERAM.R.900 DEV.638 H.490 EP.4 Opti 78002 27B78022 FERMETURE PORTE CINTREE OPT780 SLUITING GEBOGEN DEUR OPTI 78003 37B78026 DEFLECTEUR AIR OPTI 780 CINTRE LUCHTDEFLECTOR OPTI780 ROND05 37M76011 CADRE 3 COTES PLAT OPTI 760 DF 3Z VLAKKE KADER OPTI 76005 27B78027 PORTILLON CADRE 3 C. OPTI 780 - 760 DF AFDEKPLAAT3 Z KADER OPTI 780 - 760 DF05 37M76020 CADRE 3 COTES CINTRE OPTI 760 DF 3 ZIJ.GEBOGEN BEKL.KAD.OPTI 760 DK05 27B78029 PORTIL.CINTRE CADRE 3C OPTI780 ONDERDEUR OPTIFIRE 783/229 37B78023 KIT VENTILATION OPTI 780 - 700 KIT VENTILATIE OPTI 700 - 760 - 16/9 (2006)30 37M76027 KIT CLAPET PIVOTANT OPTI 760 DF SPILDRAAIENDE KLEP OPTI 760-760 DK30 37M76007 POIGNEE DE REGLAGE CLAPET PIVOTANT OPTI 700 -760 REGELINGSHENDEL SPILDRAAIENDE KLEP OPTI 700-760 30 27680052 PALIER CLAPET PIVOTANT IF RC93 STEUN DRAAIENDE KLEP IF RC93--- 37B77021 KIT VENTILATION 450 M3 VENTILATIE KIT 750 M3 PHENIX--- 37660078 KIT VARIATEUR blanc ENCASTRABLE IF96 KIT INBOUWDIMMER IF96--- 07EEG006 SA - MICROSWITCH 831611 IW3 + 161L UL MICROSWITCH MET DRUKKNOP--- 37680048 KIT THERMOCONTACT INFIRE RC93 SET THERMOCONTACT RC93--- 27660029 KIT PARE BUCHE FONTE INFIRE 96 KIT GIETIJZEREN BLOKKENHOUDER 96--- 37M76021 TRAVERSE 4 IEME COTE CADRE 3 COTES OPTI 760 DF ONDER 4DE ZIJDE 3Z KADER OPTI 760 DF--- 37B78004 BOITIER ELECTRIQUE OPTI 780 ELEKTRISCH KASTJE OPTI 780--- 37660051 KIT THERMOCONTACT 2006 COMPLET COMPLETE SET THERMOCONTACT 2006

Imprimé, le 11/09/2007

Optifi re 21

EN 13229:2001 and EN 13229 A2:2004

4920 Harzé BELGIUM

Inset appliance fired by solid fuel

Mininum insulation thickness: Side wall: Back wall: Ceiling: Floor:

Recommended fuels :Woodlogs

Emission of CO incombustion products :

Flue gas temperature :

Energy efficiency :

Thermal output :

Read and follow the operating instructions!

Optifi re 703/704

0.15 %

296 °C

06

11.3 kW

75.9 %

111 mm minimum113 mm minimum89 mm minimumno insulation required

22 Opti-

EN 13229:2001 and EN 13229 A2:2004

4920 Harzé BELGIUM






Energy efficiency :

Thermal output :


Optifi re 760 D

0.50 %

245 °C

06

10,0 kW

68,6 %

103 mm minimum113mm minimum90 mm minimum42mm minimum

Optifi re 23

EN 13229:2001 and EN 13229 A2:2004

4920 Harzé BELGIUM






Energy efficiency :

Thermal output :


Optifi re 763/764

0.25 %

345 °C

06

15.9 kW

73.7 %

118 mm minimum174 mm minimum107 mm minimumno insulation required

24 Opti-

5. Guarantee

DURATION AND LIMITATION- 6 years guarantee on: the overall structure- 2 years guarantee on: removable parts- 2 years guarantee on: fans and speed variator- No guarantee on: glass, bricks

AGREEMENT

Bodart & Gonay guarantees its appliances:

- in accordance with its catalogues and instructions for use,- for safety of operational use.

RESERVESBodart and Gonay reserves the right to modify its appliances, catalogues, instructions for use, indepen-dently, at any time, and without notice.

The validity of the guarantee is annulled in the event of non-compliance with the requirements and recommendations in these instructions.

Maintenance under guarantee will be carried out exclusively through the dealer on presentation of the purchase invoice.

Parts will only be delivered in exchange for faulty parts.

EXCLUSIONAccidents, damage and malfunctions connected with:

- Unsuitability of the rated power of the appliance for the heat requirements of the premi-ses; - Incorrect installation or connections; - Destruction of the thermostat through overheating caused by intensive use through: • the ashtray door being left open; • the fan being left on stop; - Insuffi cient or excessive draught; - Misuse; - Incompatible, destructive and/or damp fuel (treated wood); - Consumption beyond limits of use; - Inadequate maintenance; - Use of electrical and electronic components not approved by Bodart and Gonay; - Any internal modifi cation or alteration to the fi replace; - Transportation and installation.

Transportation and packaging costs.Any costs not agreed in advance by Bodart & Gonay.Costs resulting from non-use of the appliance.

EFFECTIVE DATEThe guarantee takes eff ect from the date written on the invoice. The invoice is the sole authentic docu-ment for the guarantee.

Bodart & Gonay SA - Parc Artisanal de Harzé - Rue de Lambinon, 3 - B-4920 HARZEtel: 32 (0)4 239 93 93 - fax: 32 (0)4 239 93 98

[email protected] - www.b-g.be

Optifi re 24

01.09

Optifi re

07DHOPFV2

Installation Instructions

Caution: Remove the instructions from the fi replace and give them to the client, along with the necessary instructions

(explanations and demonstrations).

25 Optifi re

INSTALLATION INSTRUCTIONS

1. Characteristics 26 2. Flue 32 3. Outside air supply 33 4. Convection air 33 5. Installation 34 5.1. Recommendations 34 5.2. Alcove 35 5.3. Electricity 35 5.4. Putting the fi replace in place 35 5.5. Frames 36 6. Options 37 6.1. Fan, speed variator, door- and temperature switch 37 6.2. Pivoting valve kit 39

Check list:

Check the diff erent minimum fi tting dimensions (take options into account!) See p.17.

Levelling the fi replace, 2 reference points.

Position the chimney connection pipe and the hot air outlet connection.

No combustible materials (wood, wallpaper, etc.) on the ceiling and on the walls around hot air outlets.

For combustible materials on the fl oor, a safe distance of 80 cm is required.

Combustion air circuit control.

Convection air circuits control.

The chimney outlet has a cowl.

Installation of frame (option) before building work.

Optifi re 26

13.5

1013

.5 10

Optifi re 703:

1.Characteristics :

27 Optifi re

13.5

1013

.510

Optifi re 704:

Optifi re 28

YAN

OG

&TRAD

OB

TYPE:OPTI763/1

REF:47M76...

PUISSANCE:16.5KWAVECVENTILATION

12KWSANSVENTILATION

COMBUSTIBLES:BOIS-CHARBON

ØSORTIEFUMEE:200MM

CHARGEDEBOIS(alluremaximum):3.5KG/H

SORTIESAIRCHAUD:4XØ125MM

DEBITMAX450M³/H

PUISSANCEELECTRIQUE:77W

PROTECTIONELECTRIQUE:FUSIBLE1.25A

TENSIONELECTRIQUE:230VAC

POIDS:139KG

OPTION

VENTILATION:

1TURBINE

CENTRIFUGE

VERMOGEN:16.5KWMETVENTILATIE

12KWZONDERVENTILATIE

BRANDSTOF(FEN):HOUT-KOLEN

ØROOKUITLAAT:200MM

HOUTVERBRUIK(maximalesnelheid):3.5KG/H

AANTALWARMELUCHTUITLATEN:4XØ125MM

VETILATORDEBIET450M³/H

ELECTRISCHVERMOGEN:77W

ELECTRISCHEZEKERING:1.25A

AANSLUITING:230VAC

GEWICHT:139KG

VENTILATIE

OPTIE:

1CENTRIFUGAAL

TURBINE

Optifi re 763:

29 Optifi re

YAN

OG

&TRAD

OB

TYPE:OPTI764/1

REF:47M76...

PUISSANCE:16.5KWAVECVENTILATION

12KWSANSVENTILATION

COMBUSTIBLES:BOIS-CHARBON

ØSORTIEFUMEE:200MM

CHARGEDEBOIS(alluremaximum):3.5KG/H

SORTIESAIRCHAUD:4XØ125MM

DEBITMAX450M³/H

PUISSANCEELECTRIQUE:77W

PROTECTIONELECTRIQUE:FUSIBLE1.25A

TENSIONELECTRIQUE:230VAC

POIDS:139KG

OPTION

VENTILATION:

1TURBINE

CENTRIFUGE

VERMOGEN:16.5KWMETVENTILATIE

12KWZONDERVENTILATIE

BRANDSTOF(FEN):HOUT-KOLEN

ØROOKUITLAAT:200MM

HOUTVERBRUIK(maximalesnelheid):3.5KG/H

AANTALWARMELUCHTUITLATEN:4XØ125MM

VETILATORDEBIET450M³/H

ELECTRISCHVERMOGEN:77W

ELECTRISCHEZEKERING:1.25A

AANSLUITING:230VAC

GEWICHT:139KG

VENTILATIE

OPTIE:

1CENTRIFUGAAL

TURBINE

Optifi re 764:

Optifi re 30

Optifi re 763D:

31 Optifi re

Optifi re 764D:

Optifi re 32

20°- 45°

OK! OK!

45°

2. Flue

RECOMMENDATIONS

The fl ue must be built according to good practice, the most impor-tant elements of which are as follows:

- Minimum height (distance between connection and top of chimney stack) will be 4 m.

- Section: chimney: Ø 200 air outlet: Ø125

Min 0,4 m

- The fl ue must be heat insulated.

- The chimney outlet (stack) and its location are very important; it is absolutely necessary that the outlet has a cowl to prevent rain reaching the fi replace. Ask advice from a chimney maker (any device contracting the section of the outlet must be avoided). The chimney outlet must be located away from areas aff ected by wind.

- The presence of obstacles near the chimney outlet must be taken into account.

- An individual fl ue does not have more than 2 catings (i.e. changes in direction). The angle of these can-tings with the vertical generally speaking should not exceed 20°, or 45° for a smooth metal fl ue.

- The fl ue must allow recovery of soot (sweepable).

- Only connect one appliance per fl ue.

FOR AN EXISTING FLUE:

It is essential to check, in addition to air tightness, emptiness and overall stability, the compatibility of the fi replace and if necessary, line the fl ue, or even modify the chimneystack.

33 Optifi re

A

B

D'D'D

DD

- In case of a double fl ue: - choose the best, - seal the unused one.

- In case of a side connection on an existing fl ue, carry out one of the following two assemblies:

- It is essential that the connection is airtight.

“Breeching” to prevent soot build-up

Airtight connec-tion

Soot trap

Max 45°

3. Combustion air and outside air supply

When a fi replace burns wood, it consumes air, which means that a certain quantity of air exits by the chimney D. This air must be compensated for by the normal inlets, A and B, and if the latter are insuffi cient, a new clean air inlet C must be added. The presence of a ventilator hood in the same living space creates an additional air outlet D’, which must also be compensated for.Indicative value of C in accordance with the diameter of the chimney and the air tightness of the house:

You must provide a fresh air inlet of 30 cm²/KW, i.e. 150 cm2.

- Preferably, this inlet will be near the fi replace. This is in order to avoid currents of cold air across the room, a vacuum in the premises and to help let fresh air in.

4. Convection air (hot air)Hot air produced by the fi replace leaves directly by the space above the door.However, it is possible to connect, in addition, 4 hot air pipes on the top of the fi replace. This allows even more heat to be extracted and/or the heat to be sent to a diff erent room from the one where the fi replace is situated. The contribution of these outlets remains restricted to +/- 1 KW per outlet. Heat-insulated pipes are recommended for the appliance to work at its best (they create a «draught» for convection air).

When installing these pipes, limit the length and changes in direction, bend at an angle at the widest change in direction and avoid the use of outlet grills with a low permeability coeffi cient, as the resulting losses in speed reduce the eff ectiveness of hot air outlets.

Optifi re 34

OK!OK!

- If hot air is sent to another room, it is essential to fi t an air return port with section at least equivalent to the hot air outlets. This is very important so as not to create a vacuum in the room, which would cause the fi replace to malfunction.

- Convection air circuits must also be taken into account (see the convection diagrams below).

5. Installation

5.1. RECOMMENDATIONS

- The chimney must be suitable.

- To avoid losses of heat in the pipes, it is recommended that they be insulated.

- The fi replace must be level.

- Check that the door works properly (side opening).

- After connection to the chimney, we advise you to light a fi re.

- It is possible not to insulate the fi replace at all. In this case, it is essential that air can circulate around the fi replace. To do this, an air stream of at least 5 cm must be provided right around the fi re, which allows at the same time for heat to be recovered. The decorative chimney must then allow clean air to enter at the bottom and leave at the top. (See drawing in 5.2.)However if the fi replace is against one of the outside walls of the house, it is preferable to insulate it from this wall.

- COMBUSTIBLE MATERIALS: they are to be prohibited in the immediate surroundings of the fi replace, hot air outlets and the chimney fl ue. A safe distance on the fl oor of 80 cm is required. Please note that when opening the door, burning embers can be projected several metres.

- INSULATING MATERIALS: use «HIGH TEMPERATURE» materials like certain rock wools. In all cases, these materials must not be in contact with convection air (DO NOT USE GLASS WOOL).

35 Optifi re

Z

YY

A

B

5.3. Electricity

- Bring the fl exible power cable to face the port fi tted in the appliance. Make sure there is enough length for the connection and for any subsequent simple maintenance.

All installation and maintenance operations on the fan and the variator must be done with the power supply disconnected.

- Clear the way for connection to the chimney and, if necessary, the hot air pipes.

- Remove any hoods and dampers.

- Insulate the outside walls.

- In the case of new building work, it is PROHIBITED to rest the building work on top of the fi replace.

A --> B: System for decompressing and cooling the fi replace and chimney mantle. Recovery of additional heat.

Z --> Y and W: Natural or forced convection (with fan as option): Fireplace double wall recovery system.

5.2. Alcove

5.4. Putting the fi replace in place

1. Dismantle the removable parts.- the door (open more than 45°and lift)- the baffl e (see dismantling a baffl e)- the refractory bricks kit and grills

2. Introduce and position the fi replace in the alcove.

- Clear the holes used for the convection circuit.

- Determine the height (telescopic feet (except OPTI760 DF). CAUTION! Comply with the MINIMUM SECTION FOR CONVECTION AIR INDUCTION, i.e. 400cm² free passage, so take into account the passage coeffi cient of grills and fi lter if there are any.

- Plan suffi cient space for the fan if necessary. The fan can be mounted from inside the fi replace or from under the fi replace.

- Heat insulate the outside adjoining wall and infl ammable materials.

- Put the appliance in place, upright and level (left/right and front/back).

Optifi re 36

REFERENES BRIQUES

CAST IRON REFERENCES

DIMENSIONS (mm)

DIMENSIONS (mm)

- It is vital that the feet are pinned down. To do this, drill a 5.25 diameter hole with the bit provided and insert the M6 SELF-CUTTING screws (except OPTI760 DF).

- Plan for passage of the motor electrical power cable when doing building work.

- Connect the hot air collars if necessary.

- Through the inside of the fi replace, look for the collar and pull it until it jams. Then pull down the bottom retainers.

- Assembling the brickwork: fi rstly: the back – secondly: the sides.

- Place the baffl es in the most closed position but without backdraft to obtain the best yield from the fi replace. (See chapter 1.5. Adjusting baffl es).

- You are advised to do a test run before doing building work around the appliance.

- Put the covering on the appliance (when designing the covering, do not forget to allow MINIMUM SECTIONS for passages of the CONVECTION CIRCUIT).

- Place the covering frame. Simply slide the frame between the covering and the springs.

- Dust the visible painted surfaces.- Make a fi rst fi re to bake the paint (ventilate the room and do not touch the fi replace). CHECK THE DRAUGHT.

- If you need to alter the position of the baffl es, note the ideal position of baffl es for your chimney at the place given on the fi rst page of these instructions. This will enable you to reposition them properly after chimney-sweeping.

Note: Possibility of using the hooks for fastening the fi replace to its pallet to fasten the fi replace to the wall.

Place the frame:1. Open and unhinge the door.2. Insert the frame in the cabinet. 3. Ideally, in terms of depth, the frame should be fl ush with the door.4. Hang the door back on and close it.

5.5. Frames

BRICKS REFERENCE

37 Optifi re OK !

6.1. Fan, speed variator, door switch and temperature switch

6. Options

The temperature switch automatically engages the fan when the appliance is hot and disengages it when it has cooled down.When switching on, a wait of about 15 minutes before it engages is normal.

Positioning the fan from inside: You are advised to remove the fi nish frame and the door.The fan is inserted from inside; you must remove the pair of grills, the two stainless steel cases located in front of the grills, the bricks behind and at the side, and the grill support.Unscrew the ash box using the Allen key. The ash box is removed through the ashtray door after removing the ashtray.Make the electric connection. You must pass the fan connector through the orifi ce provided on the left of the ash box, position the switch support on the fi replace and screw it down.Connect the fan. Insert it in the fi replace (Pay attention to the fan’s assembly direction! Blower directed backwards).Check carefully the passage of the cable and connect the variator to the left of the fi replace.To fi nish, reassemble the fi replace.

The fan enables you to pump air between the heating unit and the cabinet to recover maximum heat and thereby increase the yield and power of the appliance.The speed variator enables you to vary, according to requirements, the output of the fan.The door switch breaks contact when you open the door to prevent any backdraft of smoke and puff s of hot air during reloading of the fi replace in operation.

Positioning the fan from below:Insert the fan (condenser, white cylinder, towards you) through the lower hole so that the platform rests on the bottom of the cabinet.Position the fan using silent blocs in the fi ve housings provided.Be careful of the electrical cable.

Temperature switch

Optifi re 38

220V

220V

N°10

MAX.

MINI.

OFF= O

1.

2.

3.

6.1.

IMPORTANT: Adjustment (calibration) of the speed variator:Once installation of the fan and the diff erent components has been fully completed:

- Turn on power.

- Put the fan on minimum = knob turned fully in a clockwise direction.

- Pull the knob (1) out.

- Using a screwdriver, turn the adjustment screw (2) until the fan is operating silently; this determines the minimum output that you want on your fan.

CAUTION: Always check carefully that the fan is always turning at least a little bit, even at reduced speed. Try several on/off s of the fan down to minimum to ensure that everything is operating smoothly.If the fan has stopped in minimum position, the fan motor will be damaged!

1. Speed adjustment knob.

2. Minimum speed adjustment screw under the knob (calibration required).

3. 1.25A fuse (Remove the knob, unscrew the plate, pull out and replace).

For the power cable and position of the variator, simply measure the space required by the variator, cut the cable as required (unplugged!) and connect the variator to it as indicated in the diagram supplied with the variator.

39 Optifi re

6.2. Pivoting valve kitThis kit enables you to seal, if required, the hot air stream above the door, sending more or less hot air to the hot air outlets if the latter are connected!

Bodart & Gonay SA - Parc Artisanal de Harzé - Rue de Lambinon, 3 - B-4920 HARZEtel: 32 (0)4 239 93 93 - fax: 32 (0)4 239 93 98

[email protected] - www.b-g.be

instructions for use and maintenance

Documents