michelin databook 2013

7/14/2019 Michelin Databook 2013

1/115

TECHNICAL DATA

EARTHMOVER tyres

2013-2014 EDITION


2/115

IDENTIFICATION OF EARTHMOVER TYRES

TECHNICAL DATA EARTHMOVER TYRES

These values are given for information purpose only and may not be used for legal or statutory actions.

2013-2014 edition - N 29The most current version is available on www.michelinearthmover.com

PLEASE NOTE

Tyre load and pressure tables(pages 24 to 85)

These tables are classified according to the various applicationsof earthmoving machines.

In the load and pressure tables, the shaded boxes indicate

the normalized values.These values reflect the optimal use, the best balance of performances.


3/115


3

CONTENTS

CLASSIFICATION OF MICHELIN TYRES 4According to their aspect ratio 4

According to the standardized usage (ISO-ETRTO-TRA-JATMA#

) 5According to their tread depths 5Summary 5

TYRE MARKINGS 6

DIFFERENT MICHELIN EARTHMOVER TYRE COMPOUNDS 7

LOAD INDEX - SPEED SYMBOL 8

EQUIVALENCE LOAD INDEX 9

MICHELIN EARTHMOVER TYRE RANGE 10 and 11

TECHNOLOGY OF MICHELIN RADIAL CASING TYRES 12

COMPARISON BETWEEN BIAS AND RADIAL TYRES 13

ADVICE AND RECOMMENDATIONSON THE USE OF MICHELIN EARTHMOVER TYRES 14

Introduction 15Choice of tyre 15Use of tyres 16Fitting 16Storage and maintenance 18Vehicle checks and maintenance 18Product life 20

CHARACTERISTICS OF MICHELIN EARTHMOVER TYRES 21 to 25 MICHELIN TYRE CHARACTERISTICS - TYRE LOADS (kg/lb) AND PRESSURES (bar/psi) 26 to 87

COMPONENTS USED WITH MICHELIN EARTHMOVER TYRES 89Approved rims for Michelin Earthmover tyres 90 to 93Tubes and flaps for Michelin Earthmover tyres 94 and 95Seals for Michelin earthmover tyres 96Valves and associated accessories for Michelin Earthmover tyres 97 to 100

HELP WITH THE USE OF EARTHMOVER TYRES 101Michelin Earthmover tyres for transport machines 102Michelin Earthmover tyres for mobile cranes, special applications,

rapid intervention vehicles (civil and military) 103Michelin Earthmover tyres used in desert and similar conditions 103Michelin Earthmover tyres for working machinessurface loaders in rehandling, production, extraction and face work 104Michelin Earthmover tyres for working machines: dozers 105Michelin Earthmover tyres for working machines: graders 105Michelin Earthmover tyres for compactors 106Michelin Earthmover tyres for roadbuilding machinery(planers, stabiliser mixers, pavers) 106Michelin Earthmover tyres for underground machines 107

TYRES FOR TRANSPORT MACHINES : TKPH (TMPH) METHOD 108 to 111

MICHELIN EARTHMOVER TYRES FOR SPECIFIC USES 112 APPROXIMATE LOOSE MATERIAL DENSITIESUNITS OF MEASURE AND CONVERSION TABLES 113

(#) see page 5


4/115

According to their aspect ratio

The wide diversity of earthmover machines and their uses requires the development of numerous ranges

of tyres.

Earthmover tyres differ from those mounted on cars or commercial vehicles by:

Their size and weight

Their tread depths are proportionally greater

More reinforcements to deal with the harsher conditions of use

There are several families of earthmover tyres, characterized by their aspect ratio H/S (ratio in % between the height

of the sidewall H and the section width of the tyre S).

H= standard section height(see page 22)- S= standard section width (see page 22)

80 series

The nominal section width is expressed in:

Inches or fractions of an inchExamples: 8.25 R 15, 20.5 R 25or

Examples: 59/80 R 63Tyres for rigid trucks, articulated dumpers, loaders,handling equipment, etcThe aspect ratio is not indicated in the sizedesignation.

The H/S ratio is approximately equal to 0.80.

100 series (standard)

The nominal section width is expressed in inches with

to decimal places.Examples: 18.00 R 33Tyres for rigid trucks, handling equipment, etcThe aspect ratio is not indicated in the sizedesignation.

The H/S ratio is approximately equal to 1.

Other series of tyres are also available: 95 series, 75 series, etc.

CLASSIFICATION OF MICHELIN TYRES

4TECHNICAL DATA EARTHMOVER tyres

H= 100 %

S

H= 80 %

S

65 series

The nominal section width is expressed in inches orin millimeters, followed by the number 65.Examples: 35/65 R 33, 750/65 R 25Tyres for large loaders, articulated trucks, etc


H= 65 %

S

90 series

The nominal section width is expressed in inchesfollowed by the number 90.Example: 50/90 R 57Tyres for rigid trucks


H= 90 %

S


5/115


5

According to their tread depths

The tread depth SUPER, D1, D2 is sometimes indicated on the sidewall tyre.

(E2 - E3 - L2 -L3 -G2 - G3)

Traction / Regular treadMichelin designation:

N(Normal)

(SUPER E3, SUPER L3)Regular tread

Michelin designation:SUPER

(N < SUPER < D1)

(E4 - L4 - G4)Deep tread

Aggressive groundMichelin designation:

D1 = N x 1,5

(L5)Extra deep tread

Abrasive and aggressiveground

Michelin designation:D2 = N x 2,5

E

xternal

External

SUPERD2

D1N

Code Tread pattern Application

C1 SMOOTH Compactor

E1 RIBBED

TransportE2 TRACTIONE3 ROCKE4 ROCK (deep tread)E7 FLOTATION

G1 RIBBED

GraderG2 TRACTIONG3 ROCKG4 ROCK (deep tread)G5 ROCK (very-deep tread)

L2 TRACTION

Loader

Bulldozer

L3 ROCKL4 ROCK (deep tread)

L5 ROCK (very-deep tread)L3S SMOOTHL4S SMOOTH (deep tread)L5S SMOOTH (very-deep tread)

Summary

In addition, Michelin provides complementaryidentification to most earthmover tyres:T = Traction, R = Rock, V = speed, F = Flotation,

P = Multi purpose, S/R = Smooth/Rocke.g.: L3T Normal tread depth tyre (L3; Standardized

identification code) where traction is needed(T; Michelin code)

According to the standardised usage (ISO-ETRTO-TRA-JATMA*)

The four main categories of earthmover tyre are defined by their use. The category to which it belongs

is indicated on the sidewall of the tyre.

This is an international classification:

C Compactor

G GraderE Earthmoving

L Loader and bulldozer

Within these categories, there are different tread depths and special tread patterns, for very specific uses.These are identified by a number.They must be chosen according to the type of ground and the tyres condition of use.The letter S indicates a smooth tread; example: L-5S.

1 Ribbed (normal tread depth)2 Traction (normal tread depth)3 Normal (normal tread depth)4 Deep (deep tread)5 Very deep (very deep tread)

7 Flotation (normal tread)

* ISO: International Standard Organisation

ETRTO

: European Tyre and Rim OrganisationTRA: Tire and Rim Association

JATMA:Japan Automobile Tyre Manufacturers Association


6/115

6TECHNICAL DATA EARTHMOVER TYRES

What you can learn from the sidewall marking

1 Nominal section width of the tyre (in inches): 33

2 Tyre series: aspect ratio = 0.65

3 Radial construction: R

4 Rim diameter (in inches): 33

5 Load index of the tyre: **

6 Type of use: loader (L) with deep tread (5)

7 Radial tyre

8 Tyre for loader

9 Tubeless tyre

10Manufacturer: MICHELIN11Tread pattern: XMINED2

MICHELIN XMINED2

1

23 4 5

6

78

910

11

MICHELIN XDR2

- Radial construction

- Nominal section width of the tyre (in mm):525

- Tyre series:aspect ratio = 0.80

- Rim diameter (in inches):25

- Tubeless

- Brand:MICHELIN

- Tread pattern: X-CRANE +

12Load index of the tyre: 170

13Reference speed symbol of the tyre: F

14Regroovable

- Radial construction

- Nominal section width of the tyre (in inches): 37

- Rim diameter (in inches):57

- Tubeless

- Brand: MICHELIN

15Tyre compound: B4(explanation page 7)

- Tread pattern: XDR2

- Identification code: E4

(transport, deep tread)

- Load capacity: **

MICHELIN X-CRANE +

1213

14

TYRE MARKINGS

15


7/115


7

Type A4:Particularly resistant to cuts, tread tearing and abrasion on very rough surfaces. minimum TKPH(TMPH)(#)

Type A:Particularly resistant to cuts, tread tearing and abrasion at average speedswhich are higher than those for A4 (above). low TKPH(TMPH)(#)

Type B4:Compromise solution between abrasion resistance and average speed on rough surfaces. moderate TKPH(TMPH)(#)

Type B:Higher resistance to internal heat generation on surfaces which are not particularly rough. average TKPH(TMPH)(#)

Type C4:Adapted to running on long cycles at high speeds on well-maintained roads. high TKPH(TMPH)(#)

Type C:Very high resistance to high average speeds on long cycles run on well-maintained roads. very high TKPH(TMPH)(#)

Type A4

TKPH(TMPH)(#)

aggressive surface smooth surface

Type A

Type B4

Type B

Type C4

Type C

DIFFERENT MICHELIN EARTHMOVER TYRE COMPOUNDS

TKPH: Ton kilometer per hourTMPH: Ton mile per hour(#) see page 106


8/115


The SPEED SYMBOL indicates the maximum speed at which the tyre can carry a load corresponding to its load index,under specified conditions.

Symbol A2 A3 A4 A5 A6 A8 B C D E F G

speed(km/h) 10 15 20 25 30 40 50 60 65 70 80 90

speed(mph) 6 9 12 15 19 25 31 37 40 43 50 56

Examples of tyre marking:23.5 R 25 X-SUPER TERRAIN TL 185 B ; this tyre is able to carry 9250 kg at a speed of 50 km/h (20 390 lb at 31 mph)445/95 R 25 X-CRANE TL 174 F ; this tyre is able to carry 6 700 kg at a maximum speed of 80 km/h (14 770 lb at 50 mph)

It is imperative:- do not exceed the permitted max. speed of the tyre

- do not exceed the permitted max. distances in one hour indicated in the tablesof tyre characteristics

- At the time of fitting , it is vital that the various markings be checked , in order to be certain that the tyre is suitablefor operation at the maximum allowed vehicle speed and load.

Some tyres bear a load index and a speed symbol.

8

The LOAD INDEX is a numerical code which indicates the maximum load a tyre can carry at the speed corresponding to its speed symbol,under specified conditions.

LImaximum load

LImaximum load

LImaximum load

LImaximum load

LImaximum load

kg lb kg lb kg lb kg lb kg lb120 1 400 3 090 150 3 350 7 390 180 8 000 17 640 210 19 000 41 890 240 45 000 99 210121 1 450 3 200 151 3 450 7 610 181 8 250 18 190 211 19 500 43 000 241 46 250 101 960122 1 500 3 310 152 3 550 7 830 182 8 500 18 740 212 20 000 44 100 242 47 500 104 720123 1 550 3 420 153 3 650 8 050 183 8 750 19 290 213 20 600 45 420 243 48 750 107 470124 1 600 3 530 154 3 750 8 270 184 9 000 19 840 214 21 200 46 750 244 50 000 110 250125 1 650 3 640 155 3 875 8 540 185 9 250 20 390 215 21 800 48 070 245 51 500 113 540

126 1 700 3 750 156 4 000 8 820 186 9 500 20 940 216 22 400 49 390 246 53 000 117 950127 1 750 3 860 157 4 125 9 090 187 9 750 21 500 217 23 000 50 700 247 54 500 120 150128 1 800 3 970 158 4 250 9 370 188 10 000 22 050 218 23 600 52 040 248 56 000 123 480129 1 850 4 080 159 4 375 9 650 189 10 300 22 710 219 24 300 53 580 249 58 000 127 890

130 1 900 4 190 160 4 500 9 920 190 10 600 23 370 220 25 000 55 120 250 60 000 132 300131 1 950 4 300 161 4 625 10 200 191 10 900 24 030 221 25 750 56 780 251 61 500 135 580132 2 000 4 410 162 4 750 10 470 192 11 200 24 690 222 26 500 58 430 252 63 000 138 890133 2 060 4 540 163 4 875 10 750 193 11 500 25 360 223 27 250 60 070 253 65 000 143 300134 2 120 4 670 164 5 000 11 020 194 11 800 26 020 224 28 000 61 740 254 67 000 147 710135 2 180 4 810 165 5 150 11 350 195 12 150 26 790 225 29 000 63 940 255 69 000 152 120136 2 240 4 940 166 5 300 11 690 196 12 500 27 560 226 30 000 66 150 256 71 000 156 530137 2 300 5 070 167 5 450 12 020 197 12 850 28 330 227 30 750 67 790 257 73 000 160 930138 2 360 5 200 168 5 600 12 350 198 13 200 29 100 228 31 500 69 460 258 75 000 165 340139 2 430 5 360 169 5 800 12 790 199 13 600 29 990 229 32 500 71 660 259 77 500 170 660

140 2 500 5 510 170 6 000 13 230 200 14 000 30 870 230 33 500 73 870 260 80 000 176 400141 2 575 5 680 171 6 150 13 560 201 14 500 31 970 231 34 500 76 070 261 82 500 181 880142 2 650 5 840 172 6 300 13 890 202 15 000 33 070 232 35 500 78 280 262 85 000 187 390143 2 725 6 010 173 6 500 14 330 203 15 500 34 180 233 36 500 80 480 263 87 500 192 900144 2 800 6 170 174 6 700 14 770 204 16 000 35 280 234 37 500 82 690 264 90 000 198 450145 2 900 6 390 175 6 900 15 210 205 16 500 36 380 235 38 750 85 430 265 92 500 203 920146 3 000 6 610 176 7 100 15 650 206 17 000 37 480 236 40 000 88 200 266 95 000 209 440147 3 075 6 780 177 7 300 16 090 207 17 500 38 590 237 41 250 90 940 267 97 500 214 950148 3 150 6 950 178 7 500 16 530 208 18 000 39 690 238 42 500 93 710 268 100 000 220 500149 3 250 7 170 179 7 750 17 090 209 18 500 40 790 239 43 750 96 470 269 103 000 227 370

LOAD INDEX - SPEED SYMBOL

LOAD INDEX (LI) ANDMAXIMUM LOAD (KG/LB)

SPEED SYMBOLS


9/115


9

(1) no corresponding PR in these sizes which are only made in radial construction.

7.50 R 15 12

8.25 R 15 12

10.00 R 15

350/65 R 15 (1)

14.5 R 15

400/80 R 15 (1)

9.00 R 20 16

10.00 R 20 16

12.00 R 20 18

E20 (13./80 R 20) (1)

14.00 R 20 (1)

16.00 R 20

525/70 R 20.5

24 R 20.5

24 R 21

12.00 R 24 *** 24 24

13.00 R 24 TG * 14

14.00 R 24 TG * 16

14.00 R 24 24

14.00 R 24 *** 28 32

385/95 R 24(170E, 170F)15.00 R 24(17/80 R 24) (1)

16.00 R 24 TG * 16

16.00 R 24 ** 36

13.00 R 25 *** 28

14.00 R 25 *** 32

385/95 R 25(170E, 170F)

15.5 R 25 * 16

16.00 R 25 ** 36

395/80 R 25 (165E)

17.5 R 25 * 16

17.5 R 25 ** 20 24

18.00 R 25 * 24

445/95 R 25(174E, 177E, 177F)

445/80 R 25 (170E)

18.00 R 25 ** 36

20.5 R 25 * 24

20.5 R 25 ** 28

505/85 R 25 (183E)

550/65 R 25 * (1)

21.00 R 25 ** 40

23.5 R 25 * 28

23.5 R 25 ** 32

525/80 R 25 (179E)

600/65 R 25 * (1)

650/65 R 25 (1)

26.5 R 25 * 32

26.5 R 25 ** 32

750/65 R 25 (1)

29.5 R 25 * 34

29.5 R 25 ** 34

850/65 R 25 (1)

26.5 R 29 ** 34

775/65 R 29 (1)

29.5 R 29 * 34

29.5 R 29 ** 40

33.25 R 29 ** 44

800/65 R 29 * (1)

875/65 R 29 (1)

18.00 R 33 ** 40

21.00 R 33 ** 32

33.5 R 33 ** 44

35/65 R 33 * 36

35/65 R 33 ** (1)

37.5 R 33 ** 48

21.00 R 35 ** 44

24.00 R 35 ** 48

29.5 R 35 ** 40

33.25 R 35 ** 44

37.25 R 35 ** 48

37.5 R 39 ** 52

40/65 R 39 * 42

40.5/75 R 39 ** 54

45/65 R 39 * (1)

45/65 R 45 * 50

24.00 R 49 ** 48

27.00 R 49 ** 54

30.00 R 51 ** 64

33.00 R 51 ** 68

36.00 R 51 ** 74

50/65 R 51 ** (1)

37.00 R 57 ** (1)

40.00 R 57 ** 78

50/80 R 57 ** (1)

55/80 R 57 * (1)

50/90 R 57 ** (1)

60/80 R 57 (1)

53/80 R 63 ** (1)

55/80 R 63 ** (1)

56/80 R 63 ** (1)

59/80 R 63 ** (1)

Sizesand

Markings

Workmachines

PR

Transportmachines

PR

Sizesand

Markings

Workmachines

PR

Transportmachines

PR

Sizesand

Markings

Workmachines

PR

Transportmachines

PR

EQUIVALENCE LOAD INDEX:CORRESPONDENCE BETWEEN MARKINGS STAR RATING AND PLY RATING (PR)


10/115


MICHELIN EARTHMOVER TYRE RANGE

10

A VARIETY OF TREAD PATTERNSConsult the Earthmover tyre range brochure for the conditions of use of each tyre by machine type.

XLC XGLA2 XTLA XSNOPLUS

XHA2 XHA XLD XLDD1 XLDD2

XRDN XKA X MINE D2 XSMDN XSMD2+

XZL XZH XLB XS XMP

XMH S X-CRANE - X-CRANE + XGC XVC


11/115


XAD 65 XADN - XADN + X-SUPER TERRAIN - X-SUPER TERRAIN + XADT

XRB XTS XMS XRS XTXL

X-TRACTION S XDM XDC XDR S

XHD1 X - QUARRYX - QUARRY S X HAUL XDT

XKD1 X-TRACTION XDM XDR - XDR+ XDR2

11

MICHELIN EARTHMOVER TYRE RANGE


12/115


TECHNOLOGY OF MICHELIN RADIAL CASING TYRES

12

Using a radial tyre also improves fuel economy and reduces the environmental footprint.

Two machines are launched at 30 km/h. After disengaging the motor, we measure the distance traveled.

The machine, equipped with Michelin tyres, has less rolling resistance and therefore travel further. This equates

to lower fuel consumption in operation.

Image from tests carried out in our research and development in Almeria in Spain.

MICHELIN XHA2

23.5 - 25 BIAS

A tyres construction is the key to its performance, and outstanding tyre performance is a key competitive

advantage for transport and working machines in the earthmover industry.

Earthmoving equipment can achieve outstanding performance by using radial tyres.

CompositionThe radial design combines metal or fabric plies, extending from one bead to the other, with a belt made of several steel

plies designed to reinforce the crown of the tyre.

A unique construction with numerous advantagesThe sidewalls and crown work independently:

Minimizing the deformation of the contact patch and the weight of the tyre

Improving adhesion and traction while slowing down the rate of wear

Increasing the load capacity as the metal casing can take higher inflation pressures

The flexibility of the sidewalls of a radial tyre therefore provides greater comfort:

- No compromise on stability

- Better resistance to damage and punctures

Tyre performance levels that transformmachine performanceMichelin invented the radial design and is an expert in this field.

Radial tyres significantly improve the productivity of earthmover machines.

The radial technology offers the best compromise between the following factors: load, speed, operational efficiency of

the machines, tyre service life, operator safety, etc.

The radial casing permitsto work independently of the

tyres sidewalls and crown.

Find this test

and many other video on the

www.michelinearthmover.com

or from your Michelin

account manager.


13/115


13

COMPARISON BETWEEN BIAS AND RADIAL TYRES

Advantages: long tyre life better traction on all types of surface lower fuel consumption due to lower rolling resistance improved comfort increased resistance to punctures / flats increased resistance to heating

The crownis stabilizedby severalplies.

The casinghas only

one radialply.

Bias or cross ply construction

Disadvantages: accelerated wear

less grip increased fuel consumption

The MICHELIN X radial

The casing is made upof several

criss-crossed plies. The crownis notstabilized.

The sidewall and treadfunction separately.

The tread is unaffected by the flexingof the sidewalls, so there is:

less deformation of the tyre contact areaon the ground

less movement in tread contact area no movement between casing plies

The crown and sidewallsare formed by the sameply structure.

The tread is affected by flexing of the sidewalls,resulting in:

deformation of the tyre contact areaon the ground

movement in the tread contact area.

The casing plies tend to scissor in relationto each other


14/115


ADVICE AND RECOMMENDATIONS

ADVICE AND RECOMMENDATIONSON THE USE OF MICHELIN EARTHMOVER TYRES 15

Introduction 15

Choice of tyre 15

Use of tyres 16

Fitting 16

Storage and maintenance 18

Vehicle checks and maintenance 18

Product life 20

CHARACTERISTICS OF MICHELIN EARTHMOVER TYRES 21 to 25

Michelin 15 to 63 inch tyres

MICHELIN TYRE CHARACTERISTICS - TYRE LOADS (kg/lb) AND PRESSURES (bar/psi) 26 to 87


15/115


15

The following information is extracted from theUse and Maintenance Guide of Michelin Earthmover Tyres.For more details, consult our websitewww.michelinearthmover.com or from your Michelin representative.

Introduction

The tyre is the only point of contact between the machine and the ground.Users must ensure that they preserve the life and performance of their tyres. To do so, it is recommended that users

adhere to the following safety instructions and usage recommendations. These recommendations are subject to more

restrictive local provisions: legal, regulatory requirements, etc.

Choice of tyre

The choice of a tyre must be compliant

with legislation and with equipment

recommended by the vehicle or tyremanufacturer or by an official organisation

(size, load and speed indices, tyre structures,

etc.).

Moreover, it is necessary to take account

of the conditions in which the tyre will be

used in order to ensure its performance to

meet the users expectations. The type of

tread pattern depends mainly on conditions

of use encountered: adherence, risk of cuts,

rapid wear. The optimum performance of

equipment depends largely on the choice of

tyre.

A tread pattern inappropriate for the work

leads to a sharp reduction in the tyres life

and may affect vehicle productivity.

In the event of the original vehicle equipment

being modified, it is advisable to make sure

that the solution offered is compliant with the legislation in force, the machines technical constraints, conditions of use

and the manufacturers recommendations, (Please refer to regulations in force in the local country). Therefore, in some

countries, a modified machine must receive administrative authorisation.

Before being fitted, any second-hand or used tyre must be subjected to careful inspection by a specialist tyre professionalin order to guarantee the safety of the user and compliance with the regulations in force (Vehicle checks and maintenance).

i ch l i n ir C r r t i nn r uth

1 1r nv il l , C

Ul: 1

n u c tu r r n in u m t i u i ch l i n

, l c C rm ch uC l rm n t r r n C

r n cl : 7

i ch l in u t r l i t L t1 7 n n l l t r t

rt l urni ct r i 7u t r l il: 1 71 1

n u c tu r r n in u m t i u i ch l i n

, l c C rm ch uC l rm n t r r n C

r n cl : 7

i ch l in Chin Inv t m nt C . L t .n in C n t rr t r, 1 th r

n hih n h i 11

Ch inl : 1 1

ci i ch l in r ti ciI n u t r i l C m m r c i l L t

v n i m r ic l cr r i juc

i n ir C 1r i ll: 1 1

7

CC

lrm

nt-Frrn

-EFC

7

-Fr

(

-7)-

f.

-

h

t

r

hs:

ich

lin-

Istck-

rc

nci

l-

ris-

PEFC/10-31-1319

ADVICE AND RECOMMENDATIONSON THE USE OF MICHELIN EARTHMOVER


16/115


Use of tyres

General Recommendations

Never use the tyre beyond the limits of the technical specifications for which it has been approved on the machines.

Certain excessive or abnormal geometrical settings for the machine may have an effect on the tyres performance.

Poor use or wrong choice of tyre can also contribute to premature wearing of certain mechanical parts.

According to the obligations of the legislation, or technical or security recommendations, the two tyres on the same axle

must be identical.

Fitting of TG earthmover tyres (24 inch diameter)

TG tyres (XGLA2, XRA, XSNOPLUS) must only be fitted on drop-centre, semi drop-centre or single piece wheels.

Do not fit these tyres on flat base rims which are incompatible (there are difference in seat diameter that can approach 5 mm

between flat rims and TG rims).

Fitting of 15.5 R 25* and 17.5 R 25* earthmover tyres

L2 (XTLA*, XSNOPLUS*) and L3 (XHA*) tyres can be fitted to:

- multi piece SDC or Flat Base rims

- single piece rims

NOTE: L3** (XKA), L4 (XLDD1) and L5 (XLD D2,* XMINE D2, XSM D2+) tyres should only be fitted to multi piece rims.

They should not be fitted to single piece rims.

Dual mountingFor technical and safety reasons, you must adhere to the recommendations of the manufacturer of the machine.

We advise against the following mountings:

dual mounting of Michelin radial tyres with cross ply (bias) tyres

dual mounting of a tyre of normal tread depth with a deep treaded tyre

dual mounting of tyres of the same type which have different remaining tread depths (Some legislation sets

a maximum differential.)

According to legislation in force and for technical reasons, it is either mandatory or strongly advised to use two tyres

of the same tread design on the same axle.

Fitting

IntroductionCorrect fitting, performed in accordance with recommended operating procedures

and complying with the safety rules in force, ensures excellent protection

for people and material, and allows the tyres full potential to be exploited.

Poor fitting can cause damage to the tyres, the vehicle or to people (serious,

even fatal injuries).

It is therefore essential that these operations are carried out by people

who have been trained and who have the appropriate equipment available,

and in accordance with the procedure.

We strongly recommend that tyre fitting is undertaken by a trained tyre professional.

Tube type tyres must be fitted with an appropriate flap and inner tube.

In all cases, it is essential to refer to the technical instructions of the tyre manufacturer, vehicle manufacturer and wheel

manufacturer, as well as the user manual for the tyre-fitting machinery or equipment.

Semi DropCentre rim

(SDC)

Ok

Flat base rim

No

TG tyre


17/115


17

General precautions

Operators must always wear appropriate protection equipment.

Operators must know recommended procedure.

Operators must ensure that the vehicle is stopped, secured and properly stabilized (parking brake engaged, blocks ...),

motor turned off.

Precautions for removal

a) when removing the vehicle wheel

If the tyre is twin-fitted or if the rim shows evidence of damage, the tyres must be deflated prior to removal of

the whole fitment (remove the valve core). Failure to observe this could lead to accidents very serious consequences.

Ensure that the tyres temperature allows it to be removed safely. Comply with the manufacturers recommen dations

and instructions.

b) when the tyre is removed on the vehicle

Completely deflate the tyre before any operation.

Precautions for fitting

- Ensure that the wheel and its components are in good condition

- Check dimensional compliance (tyre and wheel)- Ensure compatibility between tyres and wheels

- Adhere to the positions, direction of fitting, direction of rotation and any other instructions referred to on the tyre sidewall.

- In the case of multi-piece wheels, replace the O-ring seal

- In the case of tubeless mounting

with a rubber valve, this must be systematically replaced

with metallic valves, check the air tightness and continue with the replacement of valve cores or seals if necessary

- After fitting the tyre to the vehicle, a torque wrench must be used to achieve the optimal torque as specified by

the machine manufacturer.

Precautions for inflating

Tyre inflation is an essential factor, not only for optimisation of tyre performance butalso in terms of SAFETY.

It is necessary for correct machine behavior (road holding and braking) as well as

maintaining the tyres stability.

Only use inflation equipment intended for this purpose and fitted with a pressure

limiter.

No person must be in the immediate proximity of the equipment in order to be out of

the path of any potential discharge in the event of an incident.

Operating pressure

The inflation pressure that must be strictly adhered to is that recommended

by the manufacturer.

In the absence of real elements known to determine a pressure (weighing results,

driving conditions, etc...), a basic pressure can be viewed on the Fitment Guide

but is only given as indicative.

The operating pressure can be given only by the Michelin representative

or by a qualified professional who is trained to take into account the use criteria of

the tyre (ground conditions, cycle lengths, transported materials, etc.).

Under-inflation or over-inflation can significantly affect tyre performance

Rolling underinflated causes an abnormal rise in temperature of the components of the tyre and can cause one

tyre degradation. This degradation is irreversible and may lead to destruction of tyre with brutal deflation.

The negative effects of insufficient inflated pressure are not necessarily immediate and even may manifest until some

time after correction...

DANGER DANGER

SIDEWALL

SIDEWALL

SAFETY ZONE

SAFETY ZONE

minimum of 6 meters from the valve

minimum of 6 meters from the valve


18/115


Storage and maintenance

Tyres are rubber-based and are subject to natural ageing.

For that storage does not adversely affect the life of the

tyre, but it must be under specific conditions, limited in

time, and as far as possible inside. In premises that are well-ventilated, dry and temperate,

protected from direct sunlight and bad weather

Away from any chemical substances, solvents or

hydrocarbons likely to interfere with the nature of the

rubber

Away from any object that could penetrate the rubber

(sharp metal, wood, etc.)

Away from any source of heat, flame, incandescent

object, material that could cause sparks or electrical

discharges and any ozone sources (transformers, electric

motors, soldering devices, etc.).

Poor handling of an unfitted tyre can cause it to be irreparably damaged.

In order to eliminate the risk of bead damage and the problems which could result, we strongly advise that:

1 - The tyre is not lifted directly by the bead with a crane hook.

2 - Flat straps are used (not steel slings or chains).

3 - The tyre is lifted under the tread and not on the beads when a fork lift truck is used.

Moreover, accessories must be stored in their original packaging, on surfaces that do not present any danger of cutting,

tearing or perforation.

In all cases, for the handling of tyres and accessories, operators must

Be equipped with their protective clothing.

Observe the safety of the company.

Use a suitable material to use.Use of instruments and equipment that is not harmful to tyres.

Operators must always wear their normal protective clothing for handling.

To share best practices and recommendations for storage of tyres or wheel assemblies, consult your Michelin representative.

Machine checks and maintenance

General recommendations

Ensure that the machine is stationary and

secured before any inspection.

Tyres must be inspected regularly in order todetect any unusual wear and potential damage.

Wheel torque must be checked in accordance

with the machine manufacturers recommen-

dations.

Any perforations, cuts or visible distortion of

the tread, sidewalls or flange area must be

the subject of a thorough (internal/external)

examination of the tyre by a tyre professional.

It is the same for any damage to the rim.

In all circumstances, do not put back into

operation any tyres that exhibit damage,

such as deformed bead or visible bead wire, separations between components, visible cable cords, damage from grease

or corrosive particles, marbling or abrasion of the interior rubber resulting from any running at insufficient pressure.

Each time the machine is inspected, check that the valve cap is in good condition. If in doubt, replace it.


19/115


19

Checking for wear

Checking for wear must always be carried out at several points on the tyre.

This check can be carried out using a tyre depth gauge or by looking for signs of wear

on the tread (noted on the sidewall by a symbol when present).

If the legal or technical limit for wear has been reached, the tyre must be removed and

replaced.

A tyre professional must be consulted if there is abnormal wear or a difference

in wear between two tyres on the same axle.

Pressure

Given that a tyre loses pressure naturally, it is necessary to adjust it periodically.

This check will enable any abnormal loss of pressure to be detected.

This check must be carried out on all the vehicles tyres.

A tyre operated with insufficient pressure will undergo an abnormal rise in operating temperature, which can lead to

irreversible damage of internal components and cause its complete destruction with up to rapid deflation of the tyre.The consequences of running with insufficient inflation pressure are not necessarily immediate and may appear even

after rectification.

An excessive pressure can cause rapid and irregular wear,

resulting in increased susceptibility to impacts (tread

damage, rupture of the casing, etc.).

It is recommended that tyre pressures are checked when

tyres are cold

If they are checked after running, the tyres are hot and

pressure will not be accurate.

If pressure is checked when hot, the pressure should bereadjusted in line with the manufacturers recommendations

(consult your Michelin representative).

Given that pressure increases with temperature, a hot tyre

must never be deflated.

Always respect the equality of pressure between dual tyres.

Inflation with nitrogen is not an exemption from the need to check tyre pressure regularly.

In all circumstances, adhere to the pressures recommended by the machine or tyre manufacturers.

Repair

Not all damage can be repaired.

All repairs must be carried out by a trainedand qualified professional.

Repairs are preceded as a matter of course

by a detailed inspection of the tyre by the

professional. A tyre that has been run

underinflated or flat may have suffered

irreversible damage and only an exhaustive

check of the interior of the tyre will enable

a diagnosis of whether or not the tyre can

be put back into use.

Removal of the tyre is therefore essential

in order to assess with certainty its actual

condition and the type of repair required.


20/115


Product life

Tyres are made from different types of materials and rubber-based components, whose properties are essential to the

proper running of the tyre itself. These properties evolve over time.

For each tyre, this evolution depends on many factors, such as climate, storage conditions (temperature, humidity,

position, etc.), conditions of use (load, speed, inflation pressure, road damage, etc.) to which the tyre is subjected duringits working life.

These ageing factors vary so much that it is impossible to predict the life of a tyre with any accuracy. This is why, in

addition to regular user checks, it is recommended to have the tyres regularly checked by a qualified professional, who

will determine whether the tyre is fit to continue in operation.

This inspection must be carried out at least once a year.

Michelin may in no way be held responsible for damage that may occur as a result of use contrary to its instructions.

The preceding information is extracted from theUSE AND MAINTENANCE GUIDE FOR MICHELINEARTHMOVER TYRES.For more details, consult our website

www.michelinearthmover.comor from your Michelinrepresentative.

il T

1 1ll ,

T l + 1

F l , l - l -F F

T l + 7

i I il l L1- 7F lll

7 l

T l + 1 711

F l , l - l -F F

T l + 7

i

l I . L .T E T ,1

11

T l + 1 1

l i l I l

lL - l T

E -1 lT l + 1 1

7

C

Cl

rm

nt -

Frr

n

-EF

C

7

-F r

(

11-

7)-

f.

-h

t

r

h

:

i ch

lin

-It

c k-

rc

nci

l-

ri-

1

P E F C / 1

0 -

3 1

- 1 3 1 9

i I i

i

i

l i


21/115

TECHNICAL DATA EARTHMOVER tyres

21

CHARACTERISTICS OF MICHELIN EARTHMOVER TYRES

EXPLANATION OF THE DIFFERENT MEASUREMENTS

e: maximum overall section width section width on measuring rim (this rim is indicated in bold)

D: external tyre diameter (R x 2)

: nominal bead seat diameter (rim diameter)

S: standard section width

E: minimum Michelin dual spacing (on measuring rim)

H: standard section height

R: free radius (2R = D)

R: static loaded radius *

RC: rolling circumference *

Tread depth: tyre tread depth in mm (rubber depth that can be use without risking damage to plies)

Cap.: Interior capacity of the tyre (to calculate the nitogen quantity when inflated with nitrogen, or the liquid quantity when filled).

This information is not required when when inflated with air.

* determinated by the reference conditions (see page 8).

The dimensional data given in tabular form in this publication (as indicated above) conforms to those of the European Standard (E.T.R.T.O.).They are given for information only and may change.


22/115


23/115


READING GUIDE FOR LOAD, PRESSURE AND USE TABLES

Reading guide for pressure, load and use tables

Remember: the correct pressure of the machine (on a site and for a job) depends on the working conditions and type of use.In order to obtain optimum performance from tyre, it is advised that:- the machine is weighed under working loads,- the maximum distance allowed per hour for the tyre is not exceeded.

The shaded box of pressure, load and use tables is the value defined by the industry standards. Up to this limit, the tyre works in an optimal zoneleading to a better balance of performance.The use of Michelin earthmover tyres outside the specification of pressure, load and use tables must have a technical validation givenby your Michelin representative.

EXPLANATION OF REFERENCES

1/ see pages ..............7 and106......explanation about TKPH (TMPH)2/ see page ................20...................explanation of the different characteristics

3/ ......................................................explanation about rim size marking example:... 44.00/5.0 [6.0] the 1stvalue indicates rim width in inch) (in this example: 44 inches)

the 2ndvalue indicates the height of the rim flange (in this example: 5 inches)

the 3rdvalue indicates the width of the rim flange (in this example: 6 inches)

4/ see page ................87...................information and explanation about components used with Michelin earthmover tyres

5/ ......................................................increase pressure by 0,5 bar on the loader front axle

6/ see page ................15...................and in the EARTHMOVER TYRE USE AND MAINTENANCE GUIDE BY MICHELINexplanation about TG rim

7/ ......................................................tyre under development that will be available during the year

8/ ......................................................deleted manufacturing tyres (commercial description highlighted to attract attention)

9/ ......................................................special order only (commercial description highlighted to attract attention)Consult your local Michelin representative

10/ see pages ..20 to 23, 99 to 109..explanation of the various tables of load according to the use and to the tyre positionand how to determine pressures.It is imperative to follow the explanation given.Not following instructions may impact tyre performance.

11/ see page ...............5.....................standardized identification codes

12/ ....................................................never exceed 6 bar



24/115



EXPLANATION OF THE DIFFERENT USES

Important: load/pressure scales are classified according different uses of machines

Loaders: This table is used in priority. The loads come from the weighing of the loader or the axle weight given by the manufacturer.Front Laden This is the pressure, load and use tables, built from the reference point

T & RA Off-the-road slow speed service. For front tyres of the loader, it is possible to increase the pressure value given in Table Front Laden up to 1 bar without

changing the carrying capacity. The resulting pressure must remain below the maximum values of inflation pressurewhen the latter are specified (see previous page).

Front Tipping This table is used when the only information available is that of the operating weight and tipping load of the loader.This table can not be used to determine the operating pressure of dimensions 35/65 R 33 and beyond.

Rear Unladen This table is used when the weight of the rear axle of the unladen loader is known or when the rear axle weightis given by the manufacturer.

Compactor:

10 and 15 km/h These tables are given according to the maximum work speeds of the compactors. In all cases, the indications andthe instructions provided by the manufacturer must be applied (Table indicating the pressure according to the workto be carried out).

Underground mining machines: This is the table that is used for tyres fitted to underground transport machines.

Graders:All axles This is the table that is used when the axle weight has been determined (by weighing or from the manufacturer's data).

This table is derived from a reference speed of 40 km/h.For higher speeds, a decline of carrying capacity, as shown in the table below, is applied in accordance with the TRA(TRA 4-27).

Speed of use (km/h) Variation in load capacity (%)

40 0

50 - 9

60 - 18

65 - 27

Transport (rigid dump trucks, trucks, ), Articulated dump trucks, Scrapers:Standard Table loads / pressures built from the reference point Off-the-road haulage service.

This is the table that is used when one has determined the axle load (by weighing or by the manufacturer).

Cranes and similar specialized machines:Standard This is the table Load / Speed / Pressure that is used to adjust the pressure at the desired load based on maximum

rates of use for the tyres fitted on vehicles (all terrain, mobile cranes, intervention vehicules).There are two ranges of tyres. Reference speed 70 km/h, Speed symbol E or reference speed 80 km/h,Speed symbol F.


25/115



Use in deserts and similar conditions Depending on whether the vehicle is fitted single or twin, the corresponding load table will be adopted.

1/ Road (Road in single / Road in twin):These pressures are to be applied when the vehicle runs on good roads (This means asphalt or compactedsurfaces). For these conditions the pressures have been calculated for a maximum speed of 80 km/h (50 mph)or 65 km/h (40 mph) depending on the tyre size considered.

2/ Track (Track in single / Track in twin):These pressures are recommended for driving on roads in poor condition, washboard (corrugated) and gravel ordesert surfaces.For these conditions the pressures have been calculated

for a maximum speed of 65 km/h (40 mph).if the speed on road is 80 km/h (50 mph), or a maximum speed of 50 km/h (30 mph).if the speed on road is 65 km/h (40 mph).

3/ Sand (Sand in single / sand in twin):These pressures are used to allow the vehicle to cross without difficulty the difficult areas where the problemof adhesion or depression can be important. To avoid premature depletion of the kilometric performance,the speed must be limited

to 20 km/h (12,5 mph) if the speed on road is 80 km/h (50 mph), to 15 km/h (9.3 mph) if the speed on road is 65 km/h (40 mph). After "sand" use, the pressure must be readjusted for subsequent conditions of use (road or track).


26/115

26

CHARACTERISTICS OF MICHELIN EARTHMOVER

TECHNICAL DATA - EARTHMOVER TYRES

15"7.50 R 15 Tube Type

XLC C1123461

1987,8

77030,3

33813,3

232491,5

911,3

4011

5.56.0

6.00S6.5B6.5

- 15/16 J

15x6.00 (8)

XMINE D2 L5123342

63,7

2309,1

84033,1

38515,2

2551100,4

4658

3910

5.56.0

6.00S6.5

B6.5

- 15/16 J

15x6.00 (8)

8.25 R 15 Tube Type

XMINE D2 L5123352

63,7

2509,8

88234,7

40215,8

2680105,5

4860,5

4712

6.06.5

B6.57.0

-15 K

15x7.50 (8)15x6.00 (8)

15x6.00

10.00 R 15 Tube Type

XMINE D2 L5123372 63,7 29511,6 91035,8 41116,2 2748108,2 4860,5 7018 7.07.5

- 15 P

15x7.50 (8)

350/65 R 15 (32x14.5 R 15) Tubeless

XMINE D2 L5826683

63,7

34813,7

84433,2

37914,9

2543100,1

3645,4

9124

10.5011.50

- -

-

14.5 R 15 Tubeless

XMINE D2 L5123101

63,7

38015

89435,2

40816,1

2711106,7

4860,5

9024

10.5011.00BD

11.011.50

- -

-

400/80 R 15 (38x16 R 15) Tubeless

XMINE D2 L5735466

63,7

38515,2

99639,2

44517,5

2996118

3442,8

12834

11.50- -

-

COMMERCIALDESCRIPTION

TypesCAI (Part Number)

Max.dist./hourkm

Miles

TKPHTMPH

(1)

DIMENSIONAL CHARACTERISTICS (2)Measuring

RimApproved

Rims(3) - (4)

Tubeless

O-ringCAI(4)

Tube Type

Ref.

Flap(4)

Michelin dimensions

e D R RC Tread depth E Cap.

mm mm mm mm mm mm l

inches inches inches inches 32rd inches galon


27/115


27

TIRE LOADS IN KG/LB - TIRE PRESSURES IN BAR/PSI

15"Machine - Use

bar 3 3,5 3,75 4 4,5 5 5,5 6 7 8

psi 44 51 54 58 65 73 80 87 102 116

XLC C1 C1 Compactors

10 km/h6 mph

12502756

14003087

14703241

15403396

16803704

18304035

19704344

21204675

24205336

27256009

15 km/h9 mph

10202249

11352503

11902624

12502756

13753032

15003308

16003528

17003749

19804366

21804807

XMINE D2 L5 L5 Loaders

Frontladen

18504079

20004410

20754575

21504741

22504961

24005292

25005513

26505843

29006395

31506946

Rearunladen

14753252

16003528

16503638

17253804

18003969

19254245

20004410

21254686

23255127

25255568

XMINE D2 L5 L5 Underground machines All axles16753693

18003969

18754134

19254245

20254465

21504741

22504961

23755237

26005733

28256229

7.5

0

R1

5


Frontladen

20004410

22004851

23005072

24005292

25505623

27005954

28506284

30006615

33007277

36007938

Rearunladen

16003528

17503859

18504079

19254245

20504520

21504741

22755016

24005292

26505843

28756339


19754355

20754575

21504741

23005072

24255347

25755678

27005954

29756560

32507166

8.2

5

R1

5

Machine - Usebar 3 3,5 4 4,5 5 5,5 6 6,5 7 8

psi 44 51 58 65 73 80 87 94 102 116


Frontladen

24005292

26005733

28006174

30006615

32007056

33507387

35007718

37008159

39008600

43009482

Rearunladen 19254245 20754575 22504961 24005292 25505623 26755898 28006174 29656538 31256891 34507607


23505182

25255568

27005954

28756339

30256670

31506946

33257332

35007718

38758544

10.0

0

R1

5

Machine - Usebar 3 3,5 3,75 4 4,5 5 5,5 6 7 8

psi 44 51 54 58 65 73 80 87 102 116


Frontladen

24005292

26605865

27906152

29206439

31506946

34007497

35707872

37508269

42009261

460010143

Rearunladen

19204234

21284692

22324922

23365151

25205557

27205998

28566297

30006615

33607409

36808114


23945279

25115537

26285795

28356251

30606747

32137085

33757442

37808335

41409129

350/65

R1

5


Front

laden

2550

5623

2850

6284

2975

6560

3100

6836

3350

7387

3600

7938

3850

8489

4100

9041

4600

10143

5100

11246

Rearunladen

20504520

22755016

23755237

24755457

26755898

28756339

30756780

32757221

36758103

40758985


25755678

26755898

28006174

30256670

32507166

34757662

37008159

41509151

460010143

14.5

R1

5


Frontladen

33007277

36508048

38258434

40008820

43509592

470010364

505011135

540011907

610013451

660014553

Rearunladen

26505843

29256450

30506725

32007056

34757662

37508269

40508930

43259537

487510749

527511631


32757221

34507607

36007938

39008600

42259316

455010033

485010694

550012128

595013120

400/80

R1

5

Treadtype

Identi-fication

code

(11)

Explanations on how to choose the tyre and to determine the inflation pressuresRefer to explanations and methods allowing to determine the inflation pressures (10) S

ize


28/115

28



20"9.00 R 20 Tube Type

XMINE D2 L5R *123382

63,7

27710,9

105441,5

48419,1

3203126,1

5164,3

9826

6.5 - B6.57.0T7.0

B 7.07.33VB7.57.5

-

A20553004

20 M

20x7.50 E20x7.50 (8)


XMINE D2 L5R123392

63,7

32312,7

117446,2

53421

3555140

5771,8

14639

8.08.5

8.5VB 8.58.50V9.00V9.0

-20 Q

20x8.50 (8)20x8.50 E

E20 Pilote (13/80 R 20) Tube Type

XLC C1240750

32212,7

105041,3

47618,7

3176125

1215,1

14037

7.33V - 7.5B 7.5 - 8.0B8.0 - 8.0V

8.00V - 8.5 BB8.5 - 8.50V

9.00V - 10.0 -

10.00V9.0

- 20 P

20x8.50 (8)

14.00 R 20 Tubeless

XMINE D2 L5R372138

63,7

36814,5

123648,7

55721,9

3745147,4

4860,5

17546

10.0010.00W

- 20 Q

20x10.00



Max.dist./hourkm

Miles

TKPHTMPH

(1)


RimApproved

Rims(3) - (4)

Tubeless

O-ringCAI(4)

Tube Type

Ref.

Flap(4)

Michelin dimensions


mm mm mm mm mm mm l



29/115


29


20"Machine - Use

bar 3 4 5 6 7 8

psi 44 58 73 87 102 116

XMINE D2 * L5R L5R Loaders

Front tip.load

510011246

580012789

645014222

715015766

780017199

850018743

Frontladen

30006615

34007497

38008379

42009261

460010143

500011025

Rearunladen

24005292

27005954

30506725

33507387

37008159

40008820

XMINE D2 * L5R L5R Underground machines All axles27005954

30506725

34007497

38008379

41509151

45009923

9.0

0

R2

0

XMINE D2 L5R L5R Loaders

Front tip.load 580012789 680014994 780017199 885019514 985021719 1090024035

Frontladen

34007497

40008820

460010143

520011466

580012789

640014112

Rearunladen

27005954

32007056

37008159

41509151

465010253

510011246

XMINE D2 L5R L5R Underground machines All axles30506725

36007938

41509151

470010364

520011466

575012679

12.0

0

R2

0

Machine - Usebar 3 4 5 6 7 8 8,5 9

psi 44 58 73 87 102 116 123 131


10 km/h6 mph

25205557

31006836

36608070

42609393

484010672

542011951

571012591

600013230

15 km/h

9 mph

2240

4939

2760

6086

3260

7188

3790

8357

4310

9504

4820

10628

5000

11025

E20

Pilote

Machine - Usebar 3 4 5 5,5 6 6,5 7 8 8,5

psi 44 58 73 80 87 94 102 116 123


Frontladen

41409129

492010849

569012546

607013384

646014244

685015104

723015942

801017662

Rearunladen

24305358

31006836

37708313

41009041

44309768

477010518

510011246

577012723


42009261

492010849

528011642

564012436

600013230

636014024

707015589

779317184

14.0

0

R2

0

Treadtype

Identi-fication

code

(11)


ize


30/115

30



20"16.00 R 20 Tubeless

XZL E2 173G123357

7043,5

43817,2

134352,9

61524,2

4080160,6

2734

31583

10.00W11.25

-

A20553004

20 V

20x10.00

20.5"525/65 R 20.5 Tubeless

XS E7 173F109421

(9)

52120,5

120047,2

54821,6

3640143,3

1721,4

33789

16.00- 19.5/20.5 UD

-

24 R 20.5 Tubeless

XS E7 176F109174

(9)

60223,7

137454,1

62024,4

4150163,4

1721,4

538142

18.00- 20.5 WAMD

-



Max.dist./hourkm

Miles

TKPHTMPH

(1)


RimApproved

Rims(3) - (4)

Tubeless

O-ringCAI(4)

Tube Type

Ref.

Flap(4)

Michelin dimensions


mm mm mm mm mm mm l



31/115


31


20"Machine - Use

bar 2 3 4 5 6 7 8 8,5 9 10

psi 29 44 58 73 87 102 116 123 131 145

XZL E2 E2 Cranes and special machines

0 km/h0 mph

35807894

483010650

612513506

739016295

866019095

990021830

1120024696

1207526625

1295028555

1470032414

5 km/h3 mph

28506284

39508710

500011025

610013451

720015876

810017861

925020396

982521664

1040022932

1155025468

10 km/h6 mph

27506064

37508269

475010474

575012679

670014774

760016758

870019184

912520121

955021058

1060023373

20 km/h12 mph

25005513

32507166

42509371

500011025

600013230

686015126

760016758

807517805

855018853

950020948

30 km/h19 mph

22504961

30006615

37508269

45009923

525011576

600013230

686015126

722515931

759016736

40 km/h25 mph

20004410

27506064

35507828

42509371

500011025

575012679

650014333

683015060

716015788

50 km/h31 mph

19504300

27005954

35007718

42009261

490010805

570012569

635014002

672514829

710015656

65 km/h40 mph

18504079

26505843

34007497

41509151

485010694

555012238

630013892

665014663

700015435

80 km/h50 mph

18003969

26005733

33507387

41009041

480010584

550012128

625013781

655014443

685015104

90 km/h56 mph

17503859

25505623

33007277

40508930

475010474

545012017

620013671

650014333

16.0

0

R2

0

20.5"Machine - Use

bar 1 2 3 4 5 6 7 8

psi 15 29 44 58 73 87 102 116

XS E7 E7Desert conditions

80 km/h max

Roadin single

14503197

21504741

28506284

36007938

43009482

500011025

575012679

650014333

Trackin single

17003749

26005733

35007718

44509812

525011576

Sandin single

23005072

38508489

525011576

525/65

R2

0.5

Machine - Use bar 1 2 2,5 3 3,5 4 4,5 5 5,5 6psi 15 29 36 44 51 58 65 73 80 87

XS E7 E7Desert conditions

80 km/h max

Roadin single

19504300

29506505

34507607

40008820

45009923

501011047

552012172

605013340

657514498

710015656

Trackin single

25505623

36508048

42509371

475010474

530011687

585012899

640014112

675014884

710015656

Sandin single

35007718

535011797

640014112

710015656

24

R2

0.5

Treadtype

Identi-fication

code

(11)


ize


32/115

32



21"24 R 21 Tubeless

XZL E2 176G110257

(9)

60823,9

138854,6

63124,8

4200165,4

18.00/1.5

-

OR 6.6-21553213

21 WAM

17-20

24"12.00 R 24 Tube Type

XZH E3 ***123369

3521,7

11982

32112,6

125849,5

59123,3

3857151,9

3037,8

17145

7.33V8.00V

8.08.5

8.50V

- 24 Q

24/25x8.50 (8)


XK A L3 ***242110

148,7

33013

124449

56922,4

3775148,6

2126,5

15541

XMINE D2 L5R242046

63,7

128050,4

59423,4

3906153,8

5771,8

13836

XSM D2+ L5S

123647

4

2,5

325

12,8

1264

49,8

580

22,8

3840

151,2

140

37

7.33V7.5

8.00V8.08.5

8.50V

-

G25 (R1237)553012

24 Q

24/25x8.50 (8)


XK A E3 ***251590

148,7 401

15,8

138054,3

63825,1

4205165,6

2430,2 270

71XK D1 A E4 ***251592

1811,2

8458

141255,6

65725,9

4313169,8

3746,6

9.00V9.0

10.0/2.010.00W

- 24/25 T

13-24/25


XK A E3 ***251590

148,7

40115,8

138054,3

63825,1

4205165,6

2430,2

27071

XK D1 A E4 ***251592

1811,2

8458

141255,6

65725,9

4313169,8

3746,6

XSM D2+ L5S123597

42,5

139554,9

63625

4227166,4

5873,1

26670

9.00V9.0

10.0/2.0

10.00W

-24/25 TAM

24/25 T

13-24/2513-24/25 S (8)

14.00 R 24 TG Tubeless

XSNOPLUS L2 * TG123861

(6)

169,9

37214,6

136453,7

54521,5

3941155,2

2430,2

26470

XGL A2 L2 * TG123395

(6)

169,9

37114,6

136053,5

59223,3

4051159,5

2531,5

31082

8.00 TG SDC9.00/1.5 DC

10.00VA SDC

-

OR 2-25HEUPO553201

24 ST24 TD

13-24 DR



Max.dist./hourkm

Miles

TKPHTMPH

(1)


RimApproved

Rims(3) - (4)

Tubeless

O-ringCAI(4)

Tube Type

Ref.

Flap(4)

Michelin dimensions


mm mm mm mm mm mm l



33/115


33


21"Machine - Use

bar 1 2 2,5 3 3,5 4 4,5 5 5,5 6

psi 15 29 36 44 51 58 65 73 80 87

XZL E2 E2Desert conditions

80 km/h max

Roadin single

19504300

29506505

34507607

40008820

45009923

501011047

552012172

605013340

657514498

710015656

Trackin single

25505623

36508048

42509371

475010474

530011687

585012899

640014112

675014884

710015656

Sandin single

35007718

535011797

640014112

24

R2

1

24"Machine - Use

bar 4 4,5 5 5,5 6 6,5 7 8 8,5

psi 58 65 73 80 87 94 102 116 123

XZH *** E3 E3 Transport Standard27005954

29506505

32007056

34757662

37508269

40008820

42509371

45009923

465010253

Machine - Usebar 2 2,5 3 3,5 4 4,5 5 5,5 6 7

psi 29 36 44 51 58 65 73 80 87 102

XSM D2+ L5SXMINE D2 L5R

L5SL5R Loaders

Front tip.load

39008600

460010143

520011466

585012899

655014443

715015766

780017199

845018632

910020066

1035022822

Frontladen

23005072

27005954

30506725

34507607

38508489

42009261

460010143

497510970

535011797

610013451

Rearunladen

18504079

21504741

24505402

27506064

31006836

33507387

37008159

40008820

43009482

490010805

XK A *** L3

XSM D2+ L5SXMINE D2 L5R

L3L5SL5R Underground machines All axles

2050

4520

2450

5402

2750

6064

3100

6836

3450

7607

3800

8379

4150

9151

4475

9867

4800

10584

5500

12128

12.0

0

R2

4

Machine - Usebar 4 5 5,5 6 6,5 7 8

psi 58 73 80 87 94 102 116

XK A *** E3XK D1 A *** E4

E3E4 Transport Standard

37508269

45009923

485010694

560012348

570012569

580012789

615013561

Machine - Usebar 2 2,5 3 3,5 4 4,5 5 5,5 6 7

psi 29 36 44 51 58 65 73 80 87 102

XSM D2+ L5S L5S Loaders

Front tip.load

555012238

640014112

730016097

815017971

910020066

1005022160

1090024035

1175025909

Frontladen

32507166

37508269

43009482

480010584

535011797

590013010

640014112

690015215

Rear

unladen

2600

5733

3000

6615

3450

7607

3850

8489

4300

9482

4700

10364

5100

11246

5500

12128

XK A *** E3XK D1 A *** E4XSM D2+ L5S

E3E4L5S

Underground machines All axles29506505

34007497

38508489

43009482

480010584

530011687

575012679

620013671

655014443

725015986

XSNOPLUS * TG L2XGL A2 * TG L2

L2L2 Loaders

Front tip.load

555012238

640014112

730016097

815017971

910020066

1005022160

1090024035

1175025909

Frontladen

32507166

37508269

43009482

480010584

535011797

590013010

640014112

690015215

Rearunladen

26005733

30006615

34507607

38508489

43009482

470010364

510011246

550012128

XSNOPLUS * TG L2XGL A2 * TG L2

L2L2 Graders All axles

23005072

27256009

31256891

35507828

14.0

0

R2

4

Treadtype

Identi-fication

code

(11)


ize


34/115

34



24"385/95 R 24 Tube Type

X-CRANE 170F778245

8049,7

37614,8

136153,6

63124,8

4153163,5

2329

28475

10.00W10.0

11.25/1.3

- 24/25 T

13-24/25

385/95 R 24 Tube Type

XMH S E2T 170E957157

7043,5

38915,3

136153,6

63224,9

4155163,6

2430,2

28475

XSNOPLUS 170E432272

7043,5

38615,2

135853,5

63525

4156163,6

28375

10.010.00W

- 24/25 T

13-24/25



Max.dist./hourkm

Miles

TKPHTMPH

(1)


RimApproved

Rims(3) - (4)

Tubeless

O-ringCAI(4)

Tube Type

Ref.

Flap(4)

Michelin dimensions


mm mm mm mm mm mm l



35/115


35


24"Machine - Use

bar 5 6 7 8 9

psi 73 87 102 116 131

X-CRANE Cranes and special machines

30 km/h19 mph

475010474

544011995

612513506

681515027

750016538

40 km/h25 mph

43709636

500511036

563512425

627013825

690015215

50 km/h31 mph

42559382

487010738

549012105

610513462

672014818

60 km/h37 mph

41809217

478510551

539011885

599513219

660014553

65 km/h40 mph

40859007

467510308

527011620

586012921

645014222

70 km/h43 mph

39908798

457010077

514511345

572512624

630013892

80 km/h50 mph

38008379

43509592

490010805

545012017

600013230

90 km/h56 mph

35707872

40909018

460510154

512011290

564012436

100 km/h62 mph

32307122

37008159

41659184

463010209

510011246

385/95

R2

4

-14.0

0

R2

4

170F

XMH S E2TXSNOPLUS

E2T Cranes and special machines

30 km/h19 mph

486010716

588012965

646014244

700015435

780017199

40 km/h25 mph

463510220

561012370

616513594

667514718

745016427

50 km/h31 mph

44109724

534011775

586512932

635514013

710015656

60 km/h37 mph

41909239

507011179

556512271

603013296

672014818

65 km/h40 mph

40208864

486510727

534511786

579012767

645014222

70 km/h43 mph

37408247

45259978

497010959

538511874

600013230

80 km/h50 mph

30866805

37358236

41009041

44459801

495010915

90 km/h56 mph

26205777

31706990

34807673

37708313

42009261

100 km/h62 mph

22454950

27155987

29806571

32307122

36007938

385/95

R2

4

Treadtype

Identi-fication

code

(11)


ize


36/115

36



24"15.00 R 24 Pil (17/80 R 24) Tube Type

XLC C1252211

41516,3

133452,5

59223,3

4002157,6

2126,5

32085

9.00V9.010.0

10.0W

- 24/25 TAM

13-24/25 S (8)

16.00 R 24 Tubeless

XGL A2 L2 * TG123903

(6)

169,9

43517,1

150059,1

64625,4

4451175,2

2734

412109

10.00 VA SDC

-

OR 2-25HEUPO553201

24/25 VD

13-24 DR


XH D1 A E4 ***123331

2213,7

10270

40115,8

141055,5

65025,6

4291168,9

3847,9

27573

XH D1 A4 E4 ***123545

(8)

1811,2

8458

38015

64925,6

4288168,8

26570

10.00/1.511.25/1.3

-

OR 2-25HEUPO553201

24/25 TAM24/25 T

13-24/2513-24/25 S (8)

385/95 R 25 Tubeless

XMH S 170E254174

7043,5

39115,4

136153,6

63224,9

4155163,6

2430,2

27873

XSNOPLUS E2 170E705961

7043,5

38815,3

136553,7

4163163,9

2531,5

28074

9.50/1.7 CR10.00/1.511.25/1.3

-

OR 3-25 SULLA

553200OR 2-25HEUPO553201

24/25 TAM

24/25 T13-24/25

13-24/25 S (8)



Max.dist./hourkm

Miles

TKPHTMPH

(1)


RimApproved

Rims(3) - (4)

Tubeless

O-ringCAI(4)

Tube Type

Ref.

Flap(4)

Michelin dimensions


mm mm mm mm mm mm l



37/115


37


24"Machine - Use

bar 3 4 5 6 6,5 7 7,5 8 8,5

psi 44 58 73 87 94 102 109 116 123


10 km/h6 mph

532011731

654014421

775017089

896519768

957021102

1018022447

1079023792

1139025115

1200026460

15 km/h9 mph

474010452

582012833

690015215

798017596

852018787

15.0

0

R2

4

Machine - Usebar 2 2,5 3 3,5 4 4,5 5

psi 29 36 44 51 58 65 73

XGL A2 * TG L2 L2 Loaders

Front tip.load

765016868

875019294

985021719

1090024035

1200026460

1310028886

1420031311

Frontladen

45009923

515011356

580012789

640014112

705015545

770016979

835018412

Rearunladen

36007938

41009041

465010253

510011246

565012458

615013561

670014774

XGL A2 * TG L2 L2 Graders All axles31506946

36257993

41259096

462510198

16.0

0

R

24

25"Machine - Use

bar 4 4,5 5 5,5 5,75 6 7 8,5

psi 58 65 73 80 83 87 102 123

XH D1 A *** E4XH D1 A4 *** E4

E4E4 Transport Standard

37508269

41009041

45009923

485010694

510011246

525011576

580012789

635014002 1

4.0

0

R2

5

Machine - Usebar 5 6 7 8 9

psi 73 87 102 116 131

XMH SXSNOPLUS E2 E2 Cranes and special machines

30 km/h19 mph

486010716

588012965

646014244

700015435

780017199

40 km/h25 mph

463510220

561012370

616513594

667514718

745016427

50 km/h31 mph

44109724

534011775

586512932

635514013

710015656

60 km/h37 mph

41909239

507011179

556512271

603013296

672014818

65 km/h40 mph 402088644865

107275345

117865790

127676450

14222

70 km/h43 mph

37408247

45259978

497010959

538511874

600013230

80 km/h50 mph

30866805

37358236

41009041

44459801

495010915

90 km/h56 mph

26205777

31706990

34807673

37708313

42009261

100 km/h62 mph

22454950

27155987

29806571

32307122

36007938

385/9

5

R2

5

170E

Treadtype

Identi-fication

code

(11)


ize


38/115

38



25"385/95 R 25 Tubeless

X-CRANE + 170F682834

(7)

8049,7

38015

136553,7

63324,9

4165164

2329

28074

X-CRANE 170F296917

8049,7

9.50/1.7 CR10.00/1.511.25/1.3

-OR 3-25 SULLA

553200

OR 2-25HEUPO553201

24/25 TAM24/25 T

13-24/2513-24/25 S (8)

15.5 R 25 Tubeless

XTL A L2 *123415

(5)

169,9

39715,6

127250,1

55321,8

3788149,1

2531,5

24565

XH A L3 *123008

169,9

40415,9

127050

55521,9

3789149,2

2632,8

XMINE D2 L5R *252905

63,7

41816,5

133652,6

60924

4049159,4

6075,6

21557

12.00/1.312.00/1.3DC13.00/1.3DC

-

OR 2-25HEUPO553201

25 SAM

15-24/25

16.00 R 25 Tubeless

XH D1 A E4 **123350

2817,4

164112

46218,2

154060,6

70427,7

4672183,9

4354,2

56422,2

380100

X-QUARRY E4R **692021

169,9

9364

43717,2

154260,7

70727,8

4683184,4

4860,5

11.25/2.013.00/2.0

-

OR 3-25 SULLA553200

24/25 VAM

14-24/25

16.00 R 25 Tubeless

XMINE D2 L5R261025

63,7

45718

153060,2

69927,5

4641182,7

7392

56422,2

32085

11.25/2.013.00/2.0

-

OR 3-25 SULLA

553200

24/25 VAM

14-24/25



Max.dist./hourkm

Miles

TKPHTMPH

(1)


RimApproved

Rims(3) - (4)

Tubeless

O-ringCAI(4)

Tube Type

Ref.

Flap(4)

Michelin dimensions


mm mm mm mm mm mm l



39/115


39


25"Machine - Use

bar 5 6 7 8 9

psi 73 87 102 116 131

X-CRANE +X-CRANE Cranes and special machines

30 km/h19 mph

475010474

544011995

612513506

681515027

750016538

40 km/h25 mph

43709636

500511036

563512425

627013825

690015215

50 km/h31 mph

42559382

487010738

549012105

610513462

672014818

60 km/h

37 mph

4180

9217

4785

10551

5390

11885

5995

13219

6600

14553

65 km/h40 mph

40859007

457510088

527011620

586012921

645014222

70 km/h43 mph

39908798

457010077

514511345

572512624

630013892

80 km/h50 mph

38008379

43509592

490010805

545012017

600013230

90 km/h56 mph

35707872

40909018

460510154

512011290

564012436

100 km/h62 mph

32307122

37008159

41659184

463010209

510011246

385/95

R2

5

-14.0

0

R2

5

170F

Machine - Usebar 2 2,5 3 3,5 4 4,5

psi 29 36 44 51 58 65

XTL A * L2XH A * L3

XMINE D2 * L5R

L2L3

L5RLoaders

Front tip.load

590013010

680014994

770016979

855018853

930020507

1030022712

Frontladen

37008159

42509371

480010584

535011797

580012789

645014222

Rearunladen

29506505

34007497

38508489

43009482

465010253

515011356

XTL A * L2XH A * L3

XMINE D2 * L5R

L2L3

L5RGraders All axles

23255127

26505843

30006615

XMINE D2 * L5R L5R Underground machines All axles33507387

38508489

43009482

480010584

520011466

580012789

15.5

R2

5

Machine - Use bar 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8psi 51 58 65 73 80 87 94 102 109 116

XH D1 A ** E4 E4 Transport Standard5000

110255450

120175900

130106400

141126850

151047300

160977550

166487750

170898000

17640

X-QUARRY ** E4R E4R Quarry transport 30 km/h19 mph5300

116875800

127896300

138926800

149947300

160977800

17199

Machine - Usebar 2 3 4 5 6 7

psi 29 44 58 73 87 102


Front tip.load

765016868

985021719

1200026460

1420031311

1630035942

1855040903

Frontladen

45009923

580012789

705015545

835018412

960021168

1090024035

Rearunladen

36007938

465010253

565012458

670014774

770016979

870019184


520011466

635014002

750016538

865019073

980021609

16.0

0

R2

5

Treadtype

Identi-fication

code

(11)


ize


40/115

40



25"445/95 R 25 Tubeless

XL B 177E282741

7043,5

42216,6

148458,4

68026,8

4506177,4

2936,5

35092

11.00/1.7 CR11.25/2

-

OR 3-25 SULLA553200

24/25 VAM

14-24/25


X-CRANE + 174F738428

8049,7

44217,4

148558,5

69327,3

4542178,8

2531,5

380100

X-CRANE 174F297069

(8)

8049,7

11.00/1.7 CR11.25/2

-

OR 3-25 SULLA553200

24/25 VAM

14-24/25



Max.dist./hourkm

Miles

TKPHTMPH

(1)


RimApproved

Rims(3) - (4)

Tubeless

O-ringCAI(4)

Tube Type

Ref.

Flap(4)

Michelin dimensions


mm mm mm mm mm mm l



41/115


41


25"Machine - Use

bar 2 3 4 5 6 7 8 9

psi 29 44 58 73 87 102 116 131

XL B Cranes and special machines

30 km/h19 mph

29256450

41009041

500011025

585012899

675014884

765016868

860018963

950020948

40 km/h25 mph

28006174

39008600

477510529

560012348

645014222

730016097

820018081

905019955

50 km/h31 mph

26505843

37258214

455010033

530011687

615013561

695015325

780017199

860018963

65 km/h40 mph

24005292

33757442

41259096

485010694

560012348

635014002

715015766

780017199

70 km/h43 mph

22504961

31506946

38508489

45009923

520011466

590013010

660014553

730016097

80 km/h50 mph

18504079

26005733

31506946

37008159

42509371

485010694

540011907

600013230

90 km/h56 mph

15753473

22004851

27005954

31506946

36508048

41509151

460010143

510011246

100 km/h62 mph

13502977

19004190

23005072

27005954

31206880

35507828

39508710

44009702

445/95

R2

5-

16.0

0

R2

5

Machine - Usebar 5 6 7 8 9

psi 73 87 102 116 131

X-CRANE +X-CRANE Cranes and special machines

30 km/h19 mph

534011775

609513439

685015104

761516791

837518467

40 km/h25 mph

491010827

560512359

630013892

700515446

770516990

50 km/h31 mph

478010540

546012039

614013539

682015038

750516549

65 km/h40 mph

459010121

524011554

589012987

654514432

720515887

70 km/h43 mph

44859889

512011290

575512690

639514101

703515512

80 km/h50 mph 42709415 487510749 548012083 609013428 670014774

90 km/h56 mph

40158853

458010099

515011356

572512624

630013892

100 km/h62 mph

37758324

43059493

484010672

538011863

592013054

445/95

R2

5

-16.0

0

R2

5

-174F

Treadtype

Identi-fication

code

(11)


ize


42/115

42




XSNOPLUS L2T * TG123871

169,9

44817,6

134252,8

58022,8

3987157

2835,3

33388

XTL A L2 *123425

(5)

169,9

45918,1

133752,6

57422,6

3964156,1

33288

XH A L3 *123009

169,9

44817,6

134052,8

58222,9

3989157

2936,5

32887

XK A L3 **263251 148,7 48118,9 134653 60023,6 4045159,3 2531,5 30079

XLD D2 A L5T *123317

106,2

45417,9

140655,4

61924,4

4206165,6

6379,4

30581

XMINE D2 L5R263220

(8)

63,7

47118,5

140255,2

63625

4237166,8

6581,9

28575

XMINE D2 L5 **009071

63,7

48018,9

64125,2

4254167,5

XSM D2+ L5S123707

(8)

42,5

45618

139554,9

59823,5

4131162,6

7898,3

27272

XSM D2+ L5S **218365 42,5139755

64125,2

4246167,2

14.00/1.5

-

OR 2-25HEUPO553201

24/25 TAM

16-24/25 (8)


XL B 170E757059

7043,5

43517,1

135653,4

61924,4

4112161,9

2632,8

34090

14.00/1.514.00/1.7 CR

-OR 3-25 SULLA

553200

OR 2-25HEUPO553201

24/25 TAM

16-24/25 (8)



Max.dist./hourkm

Miles

TKPHTMPH

(1)


RimApproved

Rims(3) - (4)

Tubeless

O-ringCAI(4)

Tube Type

Ref.

Flap(4)

Michelin dimensions


mm mm mm mm mm mm l



43/115


43


25"Machine - Use

bar 2 2,5 3 3,5 4,25 4,5 5 5,5 6 6,5

psi 29 36 44 51 62 65 73 80 87 94

XSNOPLUS * TG L2TXTL A * L2XH A * L3

XLD D2 A * L5TXMINE D2 L5RXSM D2+ L5S

L2TL2L3L5TL5RL5S

Loaders

Front tip.load

730016097

815017971

910020066

1000022050

1135025027

1175025909

Frontladen

455010033

510011246

570012569

625013781

710015656

735016207

Rearunladen

36508048

41009041

455010033

500011025

570012569

590013010

XK A ** L3 L3 Loaders

Front tip.load

michelin databook 2013

Documents

use of earthmover tyres

families of earthmover

use of tyres

michelin earthmover

radial tyres

transport machines

underground machines

tyre markings