msds - s4972

Upload: quangdung87vn

Post on 04-Apr-2018

215 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/30/2019 MSDS - S4972

    1/7

    Sigma-Aldrich - S4972 Page 1 of 7

    SIGMA-ALDRICH sigma-aldrich.comSAFETY DATA SHEET

    according to Regulation (EC) No. 1907/2006Version 5.0 Revision Date 24.04.2012

    Print Date 14.10.2012GENERIC EU MSDS - NO COUNTRY SPECIFIC DATA - NO OEL DATA

    1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

    1.1 Product identifiersProduct name : Styrene

    Product Number : S4972Brand : Sigma-AldrichIndex-No. : 601-026-00-0CAS-No. : 100-42-5

    1.2 Relevant identified uses of the substance or mixture and uses advised against

    Identified uses : Laboratory chemicals, Manufacture of substances

    1.3 Details of the supplier of the safety data sheet

    Company : Sigma-Aldrich Pte Ltd

    1 Science Park Road#02-14 The CapricornSingapore Science Park Road IISINGAPORE 117528SINGAPORE

    Telephone : +65 6779 1200Fax : +65 6779 1822

    1.4 Emergency telephone number

    Emergency Phone # : 1-800-262-8200

    2. HAZARDS IDENTIFICATION

    2.1 Classification of the substance or mixture

    Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]Flammable liquids (Category 3)Acute toxicity, Inhalation (Category 4)Skin irritation (Category 2)Eye irritation (Category 2)

    Classification according to EU Directives 67/548/EEC or 1999/45/ECFlammable.Harmful by inhalation.Irritating to eyes and skin.

    2.2 Label elements

    Labelling according Regulation (EC) No 1272/2008 [CLP]Pictogram

    Signal word WarningHazard statement(s)H226 Flammable liquid and vapour.H315 Causes skin irritation.H319 Causes serious eye irritation.H332 Harmful if inhaled.

    Precautionary statement(s)P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove

    contact lenses, if present and easy to do. Continue rinsing.

  • 7/30/2019 MSDS - S4972

    2/7

    Sigma-Aldrich - S4972 Page 2 of 7

    Supplemental HazardStatements

    none

    According to European Directive 67/548/EEC as amended.Hazard symbol(s)

    R-phrase(s)R10 Flammable.R20 Harmful by inhalation.

    R36/38 Irritating to eyes and skin.

    S-phrase(s)S23 Do not breathe gas/fumes/vapour/spray.

    2.3 Other hazardsLachrymator.

    3. COMPOSITION/INFORMATION ON INGREDIENTS

    3.1 SubstancesFormula : C8H8 C8H8

    Molecular Weight : 104,15 g/mol

    Component Concentration

    StyreneCAS-No.EC-No.Index-No.

    100-42-5202-851-5601-026-00-0

    -

    4. FIRST AID MEASURES

    4.1 Description of first aid measures

    General adviceConsult a physician. Show this safety data sheet to the doctor in attendance.

    If inhaled

    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

    In case of skin contactWash off with soap and plenty of water. Consult a physician.

    In case of eye contactRinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

    If swallowedDo NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth withwater. Consult a physician.

    4.2 Most important symptoms and effects, both acute and delayedDermatitis, Central nervous system depression, Nausea, Dizziness, Headache

    4.3 Indication of any immediate medical attention and special treatment neededno data available

    5. FIREFIGHTING MEASURES

    5.1 Extinguishing media

    Suitable extinguishing mediaUse water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

  • 7/30/2019 MSDS - S4972

    3/7

    Sigma-Aldrich - S4972 Page 3 of 7

    5.2 Special hazards arising from the substance or mixtureCarbon oxides

    5.3 Advice for firefightersWear self contained breathing apparatus for fire fighting if necessary.

    5.4 Further informationUse water spray to cool unopened containers.

    6. ACCIDENTAL RELEASE MEASURES

    6.1 Personal precautions, protective equipment and emergency proceduresUse personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.Remove all sources of ignition. Beware of vapours accumulating to form explosive concentrations.Vapours can accumulate in low areas.

    6.2 Environmental precautionsPrevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into theenvironment must be avoided.

    6.3 Methods and materials for containment and cleaning upContain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing andplace in container for disposal according to local regulations (see section 13).

    6.4 Reference to other sectionsFor disposal see section 13.

    7. HANDLING AND STORAGE

    7.1 Precautions for safe handlingAvoid contact with skin and eyes. Avoid inhalation of vapour or mist.Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostaticcharge.

    7.2 Conditions for safe storage, including any incompatibilitiesStore in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which areopened must be carefully resealed and kept upright to prevent leakage.

    Recommended storage temperature: 2 - 8 C

    Light sensitive.

    7.3 Specific end usesno data available

    8. EXPOSURE CONTROLS/PERSONAL PROTECTION

    8.1 Control parameters

    Components with workplace control parameters

    8.2 Exposure controls

    Appropriate engineering controlsHandle in accordance with good industrial hygiene and safety practice. Wash hands before breaks andat the end of workday.

    Personal protective equipment

    Eye/face protectionFace shield and safety glasses Use equipment for eye protection tested and approved underappropriate government standards such as NIOSH (US) or EN 166(EU).

    Skin protectionHandle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose ofcontaminated gloves after use in accordance with applicable laws and good laboratory practices.Wash and dry hands.

  • 7/30/2019 MSDS - S4972

    4/7

    Sigma-Aldrich - S4972 Page 4 of 7

    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC andthe standard EN 374 derived from it.

    Body ProtectionComplete suit protecting against chemicals, Flame retardant antistatic protective clothing, The typeof protective equipment must be selected according to the concentration and amount of thedangerous substance at the specific workplace.

    Respiratory protectionWhere risk assessment shows air-purifying respirators are appropriate use a full-face respirator

    with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backupto engineering controls. If the respirator is the sole means of protection, use a full-face supplied airrespirator. Use respirators and components tested and approved under appropriate governmentstandards such as NIOSH (US) or CEN (EU).

    9. PHYSICAL AND CHEMICAL PROPERTIES

    9.1 Information on basic physical and chemical properties

    a) Appearance Form: liquid, clearColour: colourless

    b) Odour no data available

    c) Odour Threshold no data available

    d) pH no data availablee) Melting point/freezing

    pointMelting point/range: -31 C - lit.

    f) Initial boiling point andboiling range

    145 - 146 C - lit.

    g) Flash point 32,0 C - closed cup

    h) Evaporation rate no data available

    i) Flammability (solid, gas) no data available

    j) Upper/lowerflammability orexplosive limits

    Upper explosion limit: 8,9 %(V)Lower explosion limit: 1,1 %(V)

    k) Vapour pressure 16,5 hPa at 37,7 C5,7 hPa at 15,0 C

    l) Vapour density no data available

    m) Relative density 0,906 g/cm3 at 25 C

    n) Water solubility insoluble

    o) Partition coefficient: n-octanol/water

    no data available

    p) Autoignitiontemperature

    490,0 C480,0 Cq) Decomposition

    temperatureno data available

    r) Viscosity no data available

    s) Explosive properties no data available

    t) Oxidizing properties no data available

    9.2 Other safety informationno data available

  • 7/30/2019 MSDS - S4972

    5/7

    Sigma-Aldrich - S4972 Page 5 of 7

    10. STABILITY AND REACTIVITY

    10.1 Reactivityno data available

    10.2 Chemical stabilityno data availableContains the following stabiliser(s):4-tert-Butylpyrocatechol (>=30 -

  • 7/30/2019 MSDS - S4972

    6/7

    Sigma-Aldrich - S4972 Page 6 of 7

    Eyes Causes serious eye irritation.

    Signs and Symptoms of ExposureDermatitis, Central nervous system depression, Nausea, Dizziness, Headache

    Additional InformationRTECS: WL3675000

    12. ECOLOGICAL INFORMATION

    12.1 Toxicity

    Toxicity to fish LC50 - Leuciscus idus (Golden orfe) - 17,00 - 66,00 mg/l - 48 hNOEC - Pimephales promelas (fathead minnow) - 4 mg/l - 96 hLC50 - Pimephales promelas (fathead minnow) - 4,08 mg/l - 96 hLOEC - Pimephales promelas (fathead minnow) - 7,6 mg/l - 96 h

    Toxicity to daphnia andother aquaticinvertebrates

    EC50 - Daphnia magna (Water flea) - 182,00 mg/l - 24 h

    NOEC - Daphnia magna (Water flea) - 1,9 mg/l - 48 hLOEC - Daphnia magna (Water flea) - 3,3 mg/l - 48 hEC50 - Daphnia magna (Water flea) - 4,7 mg/l - 48 h

    12.2 Persistence and degradabilityBiodegradability aerobic - Exposure time 28 d

    Result: > 60 % - Readily biodegradable.

    12.3 Bioaccumulative potentialno data available

    12.4 Mobility in soilno data available

    12.5 Results of PBT and vPvB assessmentno data available

    12.6 Other adverse effectsToxic to aquatic life.no data available

    13. DISPOSAL CONSIDERATIONS

    13.1 Waste treatment methods

    ProductBurn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in ignitingas this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposalcompany.

    Contaminated packaging

    Dispose of as unused product.

    14. TRANSPORT INFORMATION

    14.1 UN numberADR/RID: 2055 IMDG: 2055 IATA: 2055

    14.2 UN proper shipping nameADR/RID: STYRENE MONOMER, STABILIZEDIMDG: STYRENE MONOMER, STABILIZEDIATA: Styrene monomer, stabilized

  • 7/30/2019 MSDS - S4972

    7/7

    Sigma-Aldrich - S4972 Page 7 of 7

    14.3 Transport hazard class(es)ADR/RID: 3 IMDG: 3 IATA: 3

    14.4 Packaging groupADR/RID: III IMDG: III IATA: III

    14.5 Environmental hazardsADR/RID: no IMDG Marine pollutant: no IATA: no

    14.6 Special precautions for userno data available

    15. REGULATORY INFORMATION

    This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.

    15.1 Safety, health and environmental regulations/legislation specific for the substance or mixtureno data available

    15.2 Chemical Safety Assessmentno data available

    16. OTHER INFORMATION

    Further informationCopyright 2012 Sigma-Aldrich Co. LLC. License granted to make unlimited paper copies for internal use

    only.The above information is believed to be correct but does not purport to be all inclusive and shall beused only as a guide. The information in this document is based on the present state of our knowledgeand is applicable to the product with regard to appropriate safety precautions. It does not represent anyguarantee of the properties of the product. Sigma-Aldrich Corporation and its Affiliates shall not be heldliable for any damage resulting from handling or from contact with the above product. See www.sigma-aldrich.com and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.