nsu quickly spare parts list · 2021. 1. 16. · nsu quickly spare parts list nsu quickly spares...

NSU QUICKLY SPARE PARTS LIST

NSU QUICKLY SPARES Ivy House, Maypole, Hoath

Canterbury, Kent CT3 4LN

07714 781600 Email: [email protected]

www.nsuquicklyspares.co.uk

©nsuquicklyspares.co.uk 04/2021

mailto:[email protected]://www.nsuquicklyspares.co.uk/

2 Welcome to NSU Quickly Spares, run by enthusiasts for enthusiasts. Supplying new, used, new old stock, replica, remanufactured spares and information. Our

aim is to keep our machines running and used as originally intended. We are the official UK and Ireland supplier of Quickly Spares – Agent for B. Krippl Spares. We are enthusiasts and have a large collection of NSU Quickly's and other NSU Motorcycles that we have been collecting since 1973.

Our suppliers and customer base is large and widespread and has been built on many underlining factors such as 'word of mouth' recommendations, testimonials, positive appraisals and feedback. Initially, a mail order service, but callers are welcome by prior arrangement for larger orders. Paid orders processed by return post whenever possible. Economics and space dictate we can only hold limited amounts of certain stock items. Some delays may occur if we have to re-order stock. We welcome your telephone enquiry, but please email (via website) or leave voice mail with any enquiry. This catalogue is designed as a continuous edition, which is updated periodically. Items, which have been withdrawn or amended, may continue to be shown. If in doubt ring or email first to check prices and availability. All parts listed are new, or new old stock (N.O.S.) unless otherwise indicated. Prices are excluding post. Most spares listed are those normally held in stock or are available from our suppliers in Germany. There may be a slight delay if we have to order your part(s). Other spares not listed may be available from Germany to special order subject to importing handling charge. Most orders and enquiries processed by return – our prompt reply service is our reputation. When ordering NSU Quickly spares, Please give engine/frame nos. model type, wheel size, 2 or 3 speed, carburettor type (when ordering carburettor spares) or send sample or good drawing with dimensions. All parts listed are new or new old stock (NOS) Reconditioned, and used parts are generally available Extensive range of complete used engines (2 speed only) crankcase halves, frames, forks, (new & used) tanks, engine, clutch, gear & brake parts, part & complete carburettors, mudguards, engine side covers, hubs, spindles, sprockets, lifting handles, wheels & rims, electrical & ignition parts.

TERMS OF BUSINESS When you buy goods from us, in law you have a number of rights as a consumer. These include the right to claim a refund, replacement, where the goods are faulty, please contact us prior to returning any item. In addition to your legal rights, we also allow you to return goods within 14 days of receiving them and we will offer you an exchange or a credit note.

PAYMENT IS STRICTLY WITH ORDER PLEASE.

• Cheques or postal orders payable to A D Robbins

• PayPal (subject to 2.5% surcharge unless sent via friends and family to [email protected])

• Bank transfer, details of our bank details on request.

• All prices shown are excluding delivery.

• We are not VAT registered.

POSTAGE: We automatically insure all orders up to £20.00, we strongly advise that you take additional insurance on all orders above £20.00 up to their true cost with the courier/post office, please let us know this at the time of ordering. We can provide you with the postal tracking reference once your items have been sent, if the extra insurance is paid and the parcel is ‘lost’ a claim can be made for full cost recovery, we will not be held liable for parcels ‘lost’ in the post ‘or not delivered’ when we have sent them’, Recorded Delivery or ‘received against signature ‘can be provided extra if required. Please ensure that you inform us within 3 days of receipt of your order if you feel there are any discrepancies, outside of this period we cannot except any claims.

We look to recycle all packaging to ensure environmental sustainability wherever possible. ▪ As an approximate guide, Royal Mail, 1st class or ‘Large’ Item parcel post to UK. Mainland only £3.00. ▪ Add £4.00 for information, manuals etc. ▪ Add £5.00 for small /light items (rings, bushes, seals etc.). ▪ Add £8.00 for larger items (bearings, cables, manuals etc.). ▪ Add £11.00 for heavy items (cylinders, 1 x tyre, magneto rotors etc.). ▪ For 2 tyres + other parts or more – please email us for a quote. ▪ UK Highlands and islands always extra. ▪ If in doubt please email.

Most ‘large’ orders will normally be sent by carrier when a contact phone number is essential please ensure you provide us this to ensure effective delivery

NSU QUICKLY SPARES, Ivy House, Maypole, Hoath, Canterbury, Kent, CT3 4LN

07714 781600 Email: [email protected]

www.nsuquicklyspares.co.uk If you have parts or machines to sell please contact us. If you cannot find the part you are looking for please let us know, we may have it or know where to get it. Help us to keep you on the road. New old stock (N.O.S) -shop soiled is indicated; some parts may have deteriorated due to storage issues. Safety information; used and new, old stock spares are sold on the understanding that the purchaser is aware that these spares may not meet present day safety and quality standards or guidelines. Any advice given on parts, servicing or modifications is given in good faith and will be limited to recommendations “according to the book” by the original manufactures if available, or if not available, such help or advice will only be on the basis of past experience, knowledge, or the best information available.

http://www.nsuquicklyspares.co.uk/

3 Index

2 Terms and Conditions

3 Index

4,5,6 Crankcase

7,8 Cylinder, Cylinder Head and Decompressor

9,10 Crankshaft Assembly and Piston, piston Rings, Bearing & Seal kits, Engine Gasket Sets

11,1,2,13 Gearbox 2 Speed, Pedal Cranks, Pedals

14,15,16 Gearbox 3 Speed, Pedal Cranks, Pedals

17,18 Clutch (2 and 3 speed)

19,20,21 Electrical/Ignition (engine) Magneto/Flywheel, Spark Plugs, Points

22,23 Carburettor no 1

24,25,26 Carburettor no 2

27,28 Frame and Saddle

29,30,31 Mudguards

32,33 Centre & Side Stands and footrests

34,35,36 Front Forks, Front Suspension

37,38 Rear Suspension Quickly F

39,40,41 Handlebars, Handlebar Controls, Bell

42 Headlamp Nacelle and accessories

43,44,45 Control Cables

45,46 Speedometer, Drive and Cable

47,48 Exhaust and Silencer

49,50 Drive Chain and Brake Rods

51,52 Fuel Tank

53,54,55 Front and Rear Lighting, Horn, Wiring Loom

56,57 Cables for the L Model

58,59 Handlebars, Control, Speedo L Model

60 Rear Suspension L model

61,62 Quickly L Frame, Forks, Side Stand, Chain Guards, Spokes

63,43 Front Hub and Brake Assembly no 1 up to frame number 482754 (90mm drum diameter & alloy brake back plate), Spokes

65,66 Front Wheel Hub and Brake assembly with 90mmbrake No after frame number 482755 (90mm drum and pressed steel backplate), Spokes

67,68 Front Hub and Brake Assembly no 3 S23/2 & F23 models (126mm alloy drum diameter), Spokes

69,70 Rear Hub and Brake assembly No 1 up to frame number 482754 (90mm drum diameter & alloy backplate), Spokes

71,72 Rear Hub and Brake assembly No 2 from frame number 482755 (90mm drum a and pressed steel backplate), Spokes

73,74 Rear Hub and Brake assembly No 3 for S23/2 &F23 Models (126mm all alloy drum diameter-alloy rims), Spokes

75 Tyres and Rims

76,77 Workshop tools and paints (picture number)

78 Books, gift ideas, regalia etc.;(Picture number)

79 Photo-copied information etc. (picture number)

80 Other NSU Spares Inc. Prima, Max etc. (picture number)

80 Original Literature (not copies) ring first most are one offs

81 (Cont) Original Literature (not copies) ring first most are one offs

82 NSU Quickly Model Identification Chart

4 Crankcase

5 Crankcase (picture number)

Part Number Description Price

1 103212000 Circlip (clutch side) Locking ring £1.75

2/9 011055770 Main crankshaft bearings (pair recommended) – see below for complete kit

£20.00 pr.

3/10 160100033/4 Main crankshaft oil seals (crank drive/pair recommended) - see below for complete kit

£16.00 pr.

4 160100015 or 160101015 Gasket, please state 2 or 3 speed £7.50 ea.

5/20/21/22/23 000490000 Crankcase bolts & washers. (Set of 8 bolts, 16washers, nut) up to eng no. 791755

£12.00 set.

5/20/21/22/23 00490001 Crankcase bolts & washers (Set of 8 bolts, 16 washers, nut after eng. No. 791756

£12.00 set

7 160101022 Leaf spring £5.50

8 000070085 Stud for cylinder £10.00 ea.

8 7 x 120 DIN 835 120 mm 'extended’ stud for repairs to 'stripped' thread in crankcase

10.00 ea.

11/15 - Mainshaft bearings, Transmission – see below for complete kit

£20.00 pr.

12 160100028 Pedal shaft seal - 2 or 3 speed £8.00

13 160100027 Gear selector shaft seal - 2 speed £6.00

- 160100026/160101026 Gear selectors shaft bronze bush - 2speed or 3 speed - please state.

£7.00

- 160101027 Gear selector shaft seal – 3 speed £6.00

14 32 x1.2 DIN 472 Circlip (mainshaft) £1.75

16 160100032 Mainshaft oil seal – see page 10 for complete kit

£7.50

17 160100014 or 160101014 Gasket, please state 2 or 3 speed £7.50 ea.

18 160100008 Sleeve, left total length - 16mm £9.00 ea.

19 160100017/6.5 Sleeve, right, length of internal thread = 6.5 mm

£9.00 ea.

19 A 160100017/22.5 (for stand clip) Sleeve, right - length of internal thread = 22.5 mm. (N23, S23, S2/23, F23 models)

£9.00 ea.

23 - Spring (crinkle) washers - crankshaft bolts

£0.20 ea.

- 169300031 Extended stud for fixing NSU leg shields – replaces lower/front crankcase bolt

£3.00

24 160100501 Chain/clutch cover. N, S, N23, S23 models

£59.00

24 Chain/Clutch cover. – Used please call for availability

p.o.a

26 M6 x 15 DIN 91 Chain/Clutch cover screw £2.00

6

- 390100003 Distance tube (serrated extended tube for cover screw – 3 speed S23/F models)

£2.00

27 160100505 Cover Plate £16.50

29 M6x55 DIN 85 Chain/Clutch cover screw £2.00

30 160100009 Alloy Magneto cover for all models except S23/2 and F23 models (L.H. Brake.)

£44.00

30 390100002 Alloy Magneto cover for S23/2 and F. models (right hand brake)

£44.00

- Alloy magneto cover used Please call for availability

p.o.a

31 M6 x 18 DIN 88 Magneto cover screw for N,S,L, S23 models

£2.50

31 M6 x 30 DIN 88 Magneto cover screw for S23/2, F23 models

£2.50

32 160100025 Oil drain screw/plug £5.00

33 A8 x 12 DIN 7603 Fibre Washer for above £0.30

34 M6 x 8 DIN 85 Oil level/fill screw/plug £5.00

35 A6 x 12 DIN 7603 Fibre Washer for above £0.30

160100005 Pedal shaft bronze bush, right up to eng no. 176279

£10.00

160100026 Gear selector shaft bronze bush, 2 speed

£6.00

160101026 Gear selector shaft bronze bush, 3 speed

£6.00

160100046 (please state) Layshaft bush, 3-speed right. 14mm or 16.8 total length (closed one end)

£13.00

160100040 Layshaft bush, 3-speed left. - 10mm open ended

£13.00

089000007 Set of 3 x 7mm engine mounting bolts/ washers & nuts up to frame 501833

£12.00 set

089000008 Set of 3 x 8mm engine mounting bolts, washers & nuts after frame no 501834

£12.00 set

089000009 Set of 3 x 8mm engine mounting bolts, washers & nuts for use with carrying handle -

£12.00 set

089000010 Set of 3 x 8mm engine mounting bolts, washers & nuts for use with carrying handle and side stand –

£12.50 set

160100023 Blank engine identification plate inc. 2 x rivets - (rivets available separately @ 50p ea.)

£12.00

160101502/160100901/160100500 2 or 3 speed crankcase halves, call for availability

7

Cylinder, cylinder head, decompressor

8 Cylinder, cylinder head, decompressor (picture number)


1/2/28/29/30/31 160300502/19 Cylinder, piston (matched pair) rings, gudgeon pin, circlips, 19 mm inlet studs.

£190.00

1/2/28/29/30/31 160301502/38 Cylinder, piston (matched pair) rings, gudgeon pin, circlips, 39 mm inlet studs.

£190.00

2 160200008 Stud, 28 mm. (total length) – (5mm thread for original cylinder)

£4.50 ea.

2 160201008 Stud, 45mm. (total length) – (5mm thread for original cylinder)

£4.50 ea.

3 160200006 Base gasket £5.50

4 390200502SM Cylinder head complete with decompressor assembly (High compression type)

£83.00

5 160200004 Valve, 44mm. (up to eng. No 522989) £11.00

6 290200006 Valve, 43mm. (after eng. No 522990) £11.00

7 160200009 Packing Valve £3.00

8 160200010 Cap £3.50

10 160200005 Thrust plate £6.50

11 160200016 Spring-Valve £4.00

12 160200015 Washer £2.00

13 111710993 C-washer £0.50

14 160201013 Release lever £6.50

15 A3h DIN 7341 Rivet (pin) £1.50

16 160200007 Cylinder Head gasket £6.00

17 7.4 DIN 125 Washer £0.50

18 7 DIN 934 Nut £1.00 ea.

9 Crankshaft

10 Crankshaft assembly, piston, rings etc.; (picture number)


19 160402504S Crankshaft assembly - now with needle roller small end bearing

Not Available

20 160403502 Connecting rod only, small end bush, crankpin, 16 rollers, 2 x shim washers

£99.00

26 160400003 Small end bush – will need ‘reaming out’ when fitted to con. rod

£19.99

27 012098209 Shims, 0.2mm, 0.3mm, and 0.5mm. set of 3 only

£6.00 set

28 160400503 Meteor piston, rings, gudgeon pin, circlips. 6 Sizes only - 39.95, 39.96, 39.98, 39.99, 40.00 & 40.01 mm

£51.00 each kit

29 160400010 Piston rings, 2mm - for original piston only with plain ends (full width peg on piston)

£15.00 pr.

29 160401010 Piston rings, 2mm - for original piston only with 'stepped ends' (side peg on piston)

£15.00 pr.

29 160400011 Piston rings, 1.5 mm for piston supplied with new Parmakit cylinder/piston set

£15.00 pr.

30 160400009 Gudgeon pin £15.00

31 160400013 Circlips (pair recommended) £4.00 pr

Complete engine bearings kit – please state 2 or 3 speed

£46.50

Complete engine, gears, clutch and pedal shaft seals kit – please state 2 or 3 speed

£36.50

Decoke gasket set £13.00

160100900/160101900 Full gasket set, 2 speed or 3 speed – please state

£18.50 ea.

11 Gearbox two speed

12 Gearbox - 2 speed (picture number)

Part Number

Description Price

1 161001507 Mainshaft (107mm.) from frame no. 21027 (98mm before frame no 21026)

£29.00

2 021105512 Mainshaft Bearing (pair recommended) £20.00 pr.

3/9 161000022S Mainshaft washer – inner & outer set of 5 (0.5/0.6/0.7/0.8/0.9 mm)

£11.00 set

4 161001004 Gear 24t complete with bush 5 £26.00

5 161000028 Bush £8.00

6 161000029 Mainshaft washer – inner, (1mm) £2.50

7 161001003 Dog £26.00

8 99161001502 Gear (80t) Please state - 13t - 16t - or 18t on final drive

£30.00

- 161000401 or 161001401

Gear (18t/3 dog) (pressed into large 80t gear) 2 types – send sample

£24.00 ea.

10 Woodruff Key Sprocket

Woodruff key £2.50

12 161000109 or 161000036

Drive Sprocket (12t or optional 13T) (11t 161000136 )

£22.00 ea.

13 B 10 DIN 137 Spring washer sprocket £0.50

14 M10 x 1 DIN 936 Nut sprocket £2.00

15 161001501 Gear (24t/17t) £34.00

160102004 Layshaft £15.00

16 161000007 Layshaft washer 1mm (after engine number 87963)

£2.50

17 161000035 Layshaft washer 2mm (only used on early engine together with washer no.16)

Order 2 no 16

- 160100005 Pedal shaft bronze bush - right hand - (up to engine no. 176279)

£8.00

18 161000012 Gear (80t) £32.00

19 161000010 Crankaxle (pedal Shaft only) £33.00

21 161000015N Spacer £12.00

18/19/21 - Complete pedal shaft with 80t gear, spacer and shaft

£77.00

22 161000011 Driver £24.00

23 161000019 Spring – 2 speed (68mm) £13.00

24 161000013 Drive piece (locking member) £18.00

25/26 161000025/26 Seal ring £1.50 ea.

27,28,29 161003014 Brake operating lever, limited supply. Please enquire or send old sample

£20.00

30 241247100S Circlip (locking ring) £1.50 ea.

13 31/32 161000018 Crank, left/right - pedal crank £30.00 pr.

33/34/35 535083635 Screw wedge (cotter pin) includes nut & washer

£5.00 ea.

- 161000020 Pedal shaft nut (round nut with 2 slots) for early models before frame 447150

£10.00 pr

36 B12 DIN 127 Spring washer for crank axle (pedal shaft) £1.00

37 115500731 Hexagon pedal shaft nut £3.00 ea.

36/37 115500731/S Hexagon pedal shaft - 2 x nuts and 2 x spring washers

£8.00 set

38 535083170 Pedals with reflectors £20.00 pair

39 161400505 Selector fork £24.00

40 161400002 Gear control shaft £15.00

41 161400007 Spring £2.50

42 161400006 Washer £2.00

43 111710993 Circlip (pair recommended) £1.20 pr.

44 161400501 Gear control lever £11.00

45 161400005 Bolt for gear control lever (with circlip) to engine no. 99003

£4.00

45 161400005 Pin for non-circlip application (peened into 2 x pillars) from engine no. 9904

£4.00

46 111710993 Circlip (pair recommended) £1.00 pr.

14 Gearbox - 3 speed

15 Gearbox - 3 speed (picture number)


1 161002507 Mainshaft £30.00

1A 160100601/021105512

Mainshaft Bearings (pair recommended) £20.00 pr

2 161000007 Mainshaft washer inner -1mm (drive washer) £2.00

3 161000508 Mainshaft 1st Gear (25t) £22.00

4 161002043 Mainshaft 17 t gear/dog with 3 x 10.4 mm outer shift/dogs or send sample

£30.00

5 161002502 Gear (80t) £71.00

- 161002401 Gear (16t or 18t pressed into large 80t gear) send sample or drawing. Spur Wheel

£24.00

6 161000022S Mainshaft washer (drive washer) - set of 5 (0.5/0.6/0.7/0.8/0.9)

£10.00 set

7 01689 Woodruff Key Sprocket £2.50

8 161000109 or 161000036

Sprocket 12t (optional 13t) £22.00 ea.

10 B10 DIN 137 Spring washer for crank axle (pedal shaft) £1.00

11 M10 x 1 DIN 936

Hexagon pedal shaft nut £3.00 ea.

12 161000042 Layshaft (16t) £65.00

13 161001044 Layshaft sliding gear/dog with 17 t £29.00

14 1610003005/161013005

Layshaft gear 25t or 20t - send sample £24.00 ea.

15 161000048S Layshaft washer, – set of 3 only - 0.5mm - 0.6mm - 0.7 mm £6.00 set

21 291000018 Crankaxle – 240mm £32.00

22 291000008 Spur wheel for crank axle 3 gear £39.00

23 291000017 Spacer £15.00

24 21x1.2 DIN 471

Circlip £1.50

25 161002011 Driver - for left hand brake (N23 and S23) £17.00

26 291000007 Driver - for right hand brake (S23-2 and F23) £32.00

28 291000011 Spring – 3 speed (52mm) for N23 and S23 see 23 in 2 speed section

£11.00

30 291000006 Drive piece - for right hand brake (S23-2 and F23) £22.00

- 24 x 1.2 DIN 471

Brake arm (right hand/offside) circlip, inner £1.50

- 22 x 1.2 DIN 471

Brake arm (right hand/ offside) circlip, outer £1.50

31 291001010 Brake operating lever – for right hand/ offside brake £23.00

38 535083171 Pedals, solid block type, no reflectors. £18.50

45 161400503 Selector fork/shaft complete £80.00

46 161400021 Circlip £1.50

47/48 291400001/161400015

Spring/Cap £7.00

49 161400504 Cable selector £24.00

16

50 161400014 Pin (re-made) £5.00

51 111710993 Circlip (pair recommended) £1.00

52 161400017 Cover cap £7.00

* Crankcase mainshaft inner ‘blind or lost bearing’ removal service - £8.00 or £15.00 with new bearing fitted – excluding post *

17

Clutch

18

Clutch – 2 or 3 speed – 3 or 5 plates (picture number)


1 041401140 Seal ring £1.50

2 161300503 Clutch body, inner for 3 clutch plates –

£35.00

2A 161301503 Clutch body, inner for 5 clutch plates – for N23, S23, S23/2, F23

£93.00

3 244110010 Circlip £1.50

4 161300501 Clutch friction plate £14.00 ea.

5 161300006 Clutch plain plate £10.00 ea.

6 161301502 Clutch pinion for 3 plates - N26, S26, L

£35.00

6A 161302502 Clutch pinion for 5 plates – for N23, S23, S23/2, F23

£45.00

6B 161303502 Clutch pinion bronze bush £10.50

7 161300600 Bearing £10.00

8 161300007 Spring retainer, inner £10.00

9 161300014 Clutch Spring £14.00

10 161300008 Spring retainer, outer £10.00

11 201080011W Spring washer £0.50 ea.

12 201080011N Nut £2.00

13 161300504 Clutch cup £24.00

14 161300016 Seal ring (gasket for clutch cap)

£2.50

15 161300012 Circlip £4.50

16 161300011 Clutch lever ( Clutch Cap) £14.50

17 161300013 Spindle (clutch shaft) £10.00

18 248015000 Circlip (pair recommended) 1.50 pr

19 Magneto and Flywheel Equipment

20

Magneto/flywheel equipment: (picture number)


Magneto/flywheel equipment. N.B. Some

magneto/ignition parts are only available in used condition. There are also several types and 2 makes used (Bosch or Norris) Please send type number/make/description or even old sample when ordering.

2 Base plate only £26.00

3 Type 1 161701921 New Ignition coil. A = 53mm, B = 73mm, C = 15 or 20mm

£60.00

3 Type 2 161721922 New Ignition coil. A = 50mm, B = 74mm, C = 17.8mm

£60.00

3 Type 3 161701923 New Ignition coil. A = 54mm, B = 77mm, C = 18.5mm

£60.00

4 161701922 Lighting coil, all above measurement information essential

£32.00

5 161710905 Condenser solder type £13.00

5 161711905 Condenser with terminal/nut (save soldering) £15.00

- 041410523 Lubrication felt pad with spring. (rivet included) £8.50

- 161700924 Lubrication felt pad with angled bracket to fix to back plate

£8.50

6 161700900 H.T. lead (5mm x 290mm/copper wire cored) spark plug cable

£4.00

7 161710911 Lighting cable connector/plate £8.00

7A 161720911 Lighting cable connector plate complete with yellow cable

£12.00

7B 161710912 Terminal grub screw for above plates (4.9mm or 3.8mm O/D)

1.50ea

- 168100517 Cable harness for 26” wheel models £14.00

- 168000501 Cable harness for 23”-wheel models £14.00

9 01687 Woodruff key (flywheel) £2.50

10 20108001SW Spring washer £0.50

11 20108001SN Nut £2.00

12/13 004015085S Washer/screw (for terminal plate)/set fixing screws for lighting

£2.00 set

14 161700004 Cable clip (flat clip that 'retains' the lighting cables)

£2.00

15/16 A4 DIN 137/AM4x10 DIN 84

Washer/screw (for terminal plate) £1.00

17A 011109070 Terminal plug cap – NGK Bakelite type £8.00

17B 161702507 Terminal plug cap – Bakelite type with ‘NSU’ motif

£17.50

17C - Terminal plug cap – Rubber waterproof £8.00

18 161701002 Rubber sleeve £1.50

18A 351700002 Rubber sleeve with 22mm x 5 mm ID. Sleeve DR 7mm?

£3.00

19 - Champion L86C spark plug – for all models. £6.00

19 111700068 Bosch W7AC spark plug. - for all models £6.50

21 23 161701507 Terminal plug cap – waterproof type £16.00

20 161710908 Contact set (see opposite page for type) Type 1 -

£18.00

20 161700925 Contact set (see opposite page for type) Type 2 -

£18.00

21 161710909 Pivot post for contact breaker (brass screw-in)

£8.50

- 4DIN 6799 Spring clip for contact breaker pivot post £0.50

- 161710907 Eccentric screw/pin for adjusting type 1 points

£3.00

- - M3 - bolt, nut, plain washers, insulating washers. For points spring and condenser cable

£3.00

Flywheel/magneto puller £20.00

- 169102904C 'Thread protector' cap for use with above puller £10.00

Recondition/rebuild/repair your magneto flywheel assembly please call

19 00005222 Voltage limiter (no burnt out bulbs because of over voltage) complete with instructions

£31.00

22

Carburettor No 1

23 NSU Quickly – Carburettor no 1 (picture number)


Carburettor No 1 – (For early models without choke/cold starter pin assembly and with the choke in frame)

1 - New - complete carburettor - ready to fit not currently available

1A - Complete exchange/reconditioned carburettor

£90.00

2 - Carburettor body only £38.00

3 161600910 Main jet. Please state size number. (54, 56, 58, 60, 62, 64, 66)

£17.00 ea.

4 161600909 Needle jet. Please state size number (210 or 212)

£10.00 ea.

5 161600917 Fibre washer £0.50

6 161600908 Screw plug £7.50

7 161600905 Throttle slide. Please give carburettor no. or send sample

£16.00

8 161600904 Jet needle & clip. Please give carburettor no. length of needle or send sample

£10.00

10 161600913 Spring £3.50

11 161600916 Screw cap £14.00

12 161600901 Screw adjuster £4.00

13 161600918 Nut £0.50

14/15 161600902/903 Float complete with needle £15.00

16 391600901 Float chamber cover without tickler £20.00

16 161600919 Float chamber cover complete with ‘tickler’ £30.00

17 161600912 Seal ring £1.50

18 161600911 Tickler - only £8.00

21 161600914 Screw (pair) £2.00 pr.

22 161600008 Gasket (approx. 7mm thick) £7.00

23 B 5 DIN 137 Spring washer £0.30 ea.

24 M5 DIN 934 Nut £0.50 ea.

25

161600006 (also for Cavallino models)

Hose (for carburettor without starter & with 6 mm inlet gasket)

£16.50

26 161600002 Air filter cup (air filter body) £16.00

27 161600009 Air filter element (wet air filter) £15.00

28 161600004 Spring £3.00

29/32 161600005 Pin/nut £1.50

30 161601003 Cover £14.00

31 161600014 Gasket £2.50

24 Quickly – Carburettor no 2

25 NSU Quickly – Carburettor no 2 (picture number)


Carburettor No 2 – (for models with choke/cold start choke slide and pin assembly)

1 161610509/N New - 1/12/127 - complete carburettor - ready to fit

£107.00

1A 161610509/R Complete exchange/reconditioned carburettor (see also bottom of page)

£90.00

2 - Carburettor body only – only used available – ring first for availability

£28.00

3 161600910 Main jet. Please state size number (58, 60, 62, 64, 66)

£17.00

4 161600909 Needle jet. Please state size number (210, 212) £10.00 ea.

5 161600917 Fibre washer £0.50

6 161600908 Screw plug £7.50

7 161601905 Throttle slide. Please give carburettor no. or send sample

£15.00

8/9 161601904 Jet needle & clip. Please give carburettor no. length of needle or send sample

£10.00

10 161600913 Spring £3.50

11 161600926 Choke air slide £8.00

12 161600927 Gasket £4.00

13/1 161601916 Cap only £18.00

13/2 161601916S Cap including 2 x fixing screws, cable adjuster with locknut and choke slide pin

£28.00

13a 291600903 Tube £5.00

14 161600925 Spring clip £2.00

15 161601924 Pin – for choke slide £3.50

- 161600925 Spring clip for above choke operating pin £2.00

15A 161600018 'Extended' choke pin for leg shield carburettor cover

£6.00

16 161601901 Screw adjuster £4.00

17 161601918 Nut £0.50

18 161600923 Screw (pair) £2.50

19/20 161600902/903

Float complete with needle £15.00

21 161600919 Float chamber cover complete with ‘tickler’ £30.00

21 391600901 Float chamber cover without ‘tickler’ £20.00

22 161600912 Seal ring (packing ring) £1.50

23 161600911 Tickler - only £6.00

26 161600914 Screw (pair) £2.00 pr.

27 161600008 Gasket (approx. 7mm thick) £7.00

27a 161601008 Gasket (Bakelite spacer) £14.00

- 161605008 Paper gaskets for Bakelite spacer above (pair recommended)

£4.00 pr.

28 B 5 DIN 137 Spring washer £0.30 ea.

29 M5 DIN 934 Nut £0.50 ea.

31 161601006 Hose (for carburettor with starter & 6mm gasket) £16.50

26 32 161602006

Hose (for carburettor with starter & 25mm Bakelite spacer)

£17.00

33 161601009 Air filter element (wet air filter) £15.00

34 161600017 Cap £10.00

Some used carburettors and parts available – P.O.A.

*Exchange* Reconditioned Carburettors – most models available, with new main and needles, jet, slide, needle, float, gaskets etc.

* = Non exchange premium applies *

27 Frame and Saddle

28 Frame & Saddle (picture number)


2 023103927 Steering head race (cup) top or bottom £16.00

7 163100900 Frame number/year/model blank VIN plate with rivets (rivets available separately)

£15.00

9 163100038 Rubber plug, in cream (to stop the forks banging onto the frame)

£8.00 pr.

10 163100510 Frame cover – aluminium for early Quickly N 1953-54 models £32.00

10 163101510/163102510

Frame cover – grey or cream plastic for all other models £18.00

12 164400058 Cable holding bracket finished in beige (for 23” models with cables outside frame)

£10.00

13 168000002 Set of 3 x cable clips for 23” frame finished in zinc plate £6.00 set

32 163802501 (cream, grey or black)

Saddle complete for L model but will fit other models. Top marked ‘Denfeld’

£140.00

- 163803501 Saddle cover for above. Top marked ‘Denfeld’ (black or cream only)

£60.00

33 163800501C cream, grey or brown

Complete saddle with frame and fitted cover - ready to fit - choose your cover

£155.00

33A 163800905 (cream, grey or brown.)

Saddle cover for N.S. models, including rivets. Saddle top marked ‘NSU’

£41.00

33b 163800501 Saddle frame without cover £115.00

34 163800910 Set of 6 spare chrome rivets for saddle cover above (set) £4.50

35 163800908 Set of 10 springs £22.00

- 905 Foam mattress 'undercover' for seat cover 33A £5.00

36 163800906 Guide £9.50

- 163800907 Adjuster with washers (for above guide) £6.00

37 163800911 Spring seat £12.00

38 163800902 Saddle spring, outer £14.00

39 163800903 Saddle spring inner £14.00

40 163801003 Bolt & nut (for single saddle pivot) £7.00

40A 163800914 'Half-moon' bracket with tab to fit into nose of early saddle £12.00

41 163802915 Saddle base £15.00

42 163801019 Saddle tube £15.00

43/45 534080054/55 Clamp bolt complete with washer and ‘wedge nut’ for above £12.50

45 534080055 Wedge nut £5.00

46 163800514 Dual seat cover only with strap – fit it yourself in blue/cream or red/cream (excluding aluminium trim)

£78.00

- 000019004 20 screws/nuts/washers for fixing aluminium trim around twin seat cover as above (Trim not available)

£12.00 set

44 000019001 New - Denfeld emblem with 'backplate' and 2 x fixings £35.00

47 163800904 Clip complete - new item £20.00

- M8 x 60 DIN 931 Bolt/locknut washer for dual seat pivot £5.00

29 MUDGUARDS

30

Mudguards (picture number)

Part Number

Description Price

Mudguards etc. - for L model parts see L section in catalogue

02/03/04 M6 x 12 DIN 933

Screw/nut/spring washer – rear mudguard/stay/luggage rack

£1.80

10 163300019 Front Mudguard spacer for 23” models £4.60

11 163301019 Front Mudguard bolt and washer £1.50

12 163300516 Front mudguard stay lower 23” models £40.00

13 533085385 NSU emblem for N.S.L, 26” models £20.00

13A 296600019 NSU emblem for 23” models (see below for mounting pins) £20.00

Emblem mounting pin and clip to original specification (pair)

£3.00

- 486600001 NSU Emblem for Quick 50 - front or rear mudguards (see below for mounting pins)

£20.00

Emblem mounting pin and clip to original specification (pair)

£3.00

14 167300509 Toolbox lid only with ‘turn catch’ (S23 & F23. models) £48.00

14A 293900507 Toll box lid ‘turn catch’ £12.00

14B 167300508 New toolbox only for S23 - S233/2 and F23 models N/A

16 163400021 Rear mudguard chrome badge with red NSU letters (2 x pin fixings)

not currently available

16 163400015 Rear mudguard ‘NSU’ transfer. Red, white, blue or gold £7.00

19 163800512 Saddle support (23 S/2) models, used only £45.00

20 163300503 Front mudguard stay, lower. N, , 26” wheel models £39.00 ea.

20A 163300502 Front mudguard stay, upper. N, S, 26” wheel models £39.00 ea.

20A 163300502 Front mudguard stay upper N. S. 26”-wheel models - new, old stock.

£39.00 ea.

- 164400059S

Speedo/front brake cable holder, fits on front mudguard stays S2, S23, F23 models

£9.00 pr

- 169300057 Black rubber grommet for speedo/front brake cables - S26, L and S2 models

£2.00 ea.

21 163400508 Spring clip for early wire type centre stand £16.00

22 163400503 Rear mudguard stay, upper. N,S, 26” wheel models £29.00

22 163400521 Rear mudguard stay, upper N23 models £29.00

23 163400504 Rear mudguard stay, lower. N,S, 26” wheel models (with cable clips)

£29.00

23 163400520 Rear mudguard stay, lower. N 23, S23, F23 models (with cable clips)

£29.00

- 163400529 Rear mudguard stay, top left (with chainguard fixing) - S23/S2-23/F23

£23.00

- 163400530 Rear mudguard stay, top right - S23/S2-23, F23 £23.00

24/26/27 M4 x 10 DIN 85

Screw/nut/washer – both mudguards/stay/tops £1.00

25 163100087 Rear number plate bracket new Euro style as pictured or refurbished UK style (if available)

£8.50

31 28/29/30 000079865 Bolt, chrome, raised head, locknut, washer (also to fix frame cover)

£4.40

31/32 M6 x 25 DIN 931

Bolt/spring washer – rear mudguard, centre stays fixing. £1.50

- 000048000 Front m/guard fixings, complete set screws/nuts/washers. Please state model e.g. N26, S26, S23, S23/2, F23

£6.00

- 000049000 Rear m/guard fixings, complete set screws/nuts/washers. Please state model e.g. N26, S26, S23. S23/2, F23

£6.60

33 163400505 Skirt guard cord (set of 4 in red or green) £15.00

34 163400011 Skirt guard hook £3.60

35/36 M6 x 8 DIN 933

Bolt/spring washer – front mudguard, centre stays fixing £1.50

37 M6x12 DIN 933

Front mudguard fixing bolt complete with washer, 26” models

£1.50

38 163800925 Dual seat bracket plate £14.30

- - Front number plate.- 5¼ x 4½. - New old stock £10.00

Legal size rear number plate letters/numbers in self adhesive white

£1.00 ea

32

Centre Stands and Footrests

33

Centre/side stand/footrests etc.: (picture number)


2 163500013S Bush £7.30

3 163501504 Tube £9.00

4 Washer/split pin £1.50

2/3/4/5 163500010/13/1504 2 x bushes/tube/washer/split pin - complete set

£17.50

6 163500507 centre stand for N23 model only

£58.00

6 163500508 Centre stand only for - S23, S23/2 models

£58.00

6 163500509 Centre stand only for - F23 models

£58.00

6

Tubular centre stand to substitute early 26” unstable ‘wire’ type stand, includes centre stand, 2 x bolts and clip

£74.00

6a 169305509 Remade centre stand for 26" models

£65.00

6b 000111025 Fixing kit for above stand £8.00

8/9 B12 DIN 137/B10 DIN 137

Spring washers £0.50ea

10 M10x1DIN 936 Nut £1.00 ea.

7/8/9/10 293501105 Complete set for centre stand 2 x bolts, 4 x washers, 2 x nuts

£13.00

11 293501504 Spring clip for centre stand N23, S23,S2,F,T,TT

£20.00

12/13 M6x12 DIN 933/B6 DIN 137

Bolt & spring washers £1.50

18 393700501 Rear passenger footrests (marked ‘Denfeld’)(oval)

£39.99pr

18 393700501 Rear passenger footrests (marked ‘Denfeld’)(round)

£41.00pr

19/20 025103290/B12DIN 137

Nut and spring washer for footrests

£3.00

- M12x1.5x20 DIN 961

Bolt for rear passenger footrests – F23 models only

£3.00

21 169300509 Side stand complete with cream rubber foot and fixing bracket

£51.00

23 169300044 Side stand, cream rubber foot

£10.00

34

Front Forks

35

Front forks (picture number)


3 044412131 Bottom cone (for top see item 40) £14.00

4 167300900/2503/3900

Front toolbox cover, please state exact model, frame no. wheel size etc.

£35.00

6 164100513 Steering lock with 2 x keys for 26” N.S.L. models £26.00

7 167300004 Front toolbox screw £5.20

8 164100064 Escutcheon plate (lock cover) including rivet £8.00

9 043411209 Rubber strip - up to frame number 109741 £8.00 pr

11 164100083 Nameplate badge £18.00

12 164100401 Bush, pair recommended. (up to frame no.109741) £15.00 pr.

13 164100053S Cap outer (2 reqd. per suspension link - 19.5 mm dia.)

£6.00 pr.

14 164101508 Swinging Link, right hand (with cable socket) up to frame no 109741exchange only

POA

15 164100056 Bush, pair recommended. 8.5mm (from frame no. 109742, to 482754)

£14.00 pr.

16 164101509 Swinging Link, left hand up to frame no. 109471 exchange only

POA

17 164100508 Swinging Link, right hand (with lug for brake cable adjuster ) up to frame 109471exchange only

POA

18 164100010 Spring, pair recommended (coiled ends that screw on to leading link)exchange only

POA

19 164100902 Pin for swinging link with ‘built in’ grease nipple (up to frame # 109741)

£12.00

20 164100012 Retainer, top (crush piece for spring) £6.00

21/22 M7x15 DIN 933 Screw/washer £1.50 ea.

23 164101508/1509//2508/0531/0532

Swinging link - 3 types - left or right - please state frame number/spindle size, exchange only, please contact

POA

24 164101056S Bush, pair recommended. 9mm (from frame no. 482755)

£15.00

25 164100081 Set Cap – inner (2 reqd. per suspension link - 24 mm dia. )

£5.50 pr.

26 D6 DIN3402 Grease nipple £5.00 ea.

27 164100080 Set Cap – outer (2 reqd. per suspension link - 25.5 mm dia.)

£5.50 pr

28/29 164100045 Bolt/washer £3.00 ea.

30 164103010 Spring pair recommended (flat ends) £32.00 pr.

31 164101088 Rubber plug £6.00 ea.

32 164100055 Bush £4.50 ea.

33/34 164100054/50 Bolt/nut for swinging link £6.00

35 164100515 Stop, pair recommended for swinging link £26.00 pr.

36-38 M6x36 DIN931 Bolt/nut £6.00

36

39 024049962 Set of Balls for steering £8.00

40 024103928 Top cone (for bottom see item 3) £14.00

41 24103929 Cover. £6.00

42 074742006 Nut £4.50

43 164100086 Washer under the handlebar support £4.00

44 164102046 Handlebar support – (after frame no. 86472) £44.00

45/47 M8x18 DIN 933 Hex bolt/nut for handlebar support £3.25

48 164100051 Lock plate £4.00

49 024103441 Cap nut £18.00 ea.

50 164100101 Bracket for S23, S23-2 and F23 models £15.00

51 164100089 Front suspension left/right shrouds £40.00 ea

37

Rear Suspension Quickly F

38 Rear suspension – F model (picture number)


9 295600002 Shock absorber unit, inner, oil filled part only – excluding sleeve, shroud, main spring

£78.00

10 008020006S Rubber ring/bush £12.00 pr

11 166600001 Suspension unit top cover £42.00 pr

12 295700035 Set of nuts for shock absorber £4.00 pr

13 295700031 Cover sleeve. (Grey plastic) Bush for shock absorber - front

£20.00

14 294100013 Bush (on rear of swinging arm) £5.75

15 16 x 1 DIN 471 Circlip (for front of swinging arm) £1.50 ea.

16 193201013 Swinging arm bush (pair recommended) (Bush for rear fork)

£17.00 pr

17 163200034 Swinging arm shaft or pin complete with 2 x circlips

£32.00

18/19 000019008 Screw set for cover £3.50

25/26 295700025 Pin/circlip £10.00 pr.

39

Handlebars

40 Handlebars, controls etc.: (picture number)


1a 164301002 Handlebars –26” wheel model

£38.00 ea.

1b 164300055 Handlebars – 23” wheel model

£38.00 ea.

2 - 9 *Throttle control complete with grip, brake lever etc. Please state which model

Priced according to model

3 164400920 Throttle twist grip adjusting screw/locknut and internal spring plate

£12.00 (remade)

4 044413608 Clamp screw £4.00

5 164400902 Front brake lever – all models except L

£18.00

6/7/8 164400903 Bolt/nut/washer for brake lever

£3.00

8A 164402921 Washer £3.00

9A 164400904

Original style cream rubber grip (up to f/m no. 268490) without flange, lever end

£10.00 ea.

9B 164401904s

Original style rubber grip with flange in cream (after f/m no.268491)

£14.00 ea.

9C 164418904 in cream or grey

Remade PVC grip marked ‘Magura’ with flange. N23, S23, S2-23, F23

£14.00 ea.

10 164401905

Used 2-speed stationary/. Clamp part only (with square window)

Please call for details

10 A * 164303503 (complete assembly)

2sp gear change assembly with new clutch, decompressor levers & PVC grip *

£220.00

10B * 164303503 (complete assembly)

3sp gear change assembly with new clutch, decompressor levers & PVC grip *

£180.00

11 111300780 Ball £0.50

12 164400911 Spring £6.00

13 014106433 Grub screw £10.00

14 164400913 Clamp screw £2.50

15 164400909 Decompressor lever £15.00

16 044000044 Decompressor lever screw

£3.50

17 164400916 Decompressor support £14.00

19 164400910 Stirrup £5.00

41 20 164400907 Clutch lever, 2 speed £19.00

20 164402907 Clutch lever, 3 speed £25.00

21/22/23 164400908 Bolt/nut/washer for clutch lever

£4.00

24 164400505 NSU Bell as fitted to early German machines, NSU motif on top

£20.00

25 164300001 Clip for handlebar £26.00 pr.

26/27/28 101082405 Bolt/lock washer/cap nut (plated)

9.50 set

* = Reconditioned

42

Headlamp Nacelle (Shell)

Headlamp nacelle, S2. S23, S23/2, F. models; (picture number)


13 163900502 Headlamp Fork cowling UV resistant - better than original

£240.00

15/16 164100064 Lock escutcheon plate with rivet £8.00

17 164100083 Nameplate (Badge) £19.00

18/19 BM5x20DIN7986

Headlamp Fork cowling front fixing screw and washer

£1.50

20/21 000006300 Headlamp Fork cowling side fixing screw and clip

£2.00

22 164100536 Steering lock with 2 x keys for S23, S23-2, F models

£26.00

43

Control Cables

44

Control cables; (picture number)


1 164402503 Gear change cable – 2 speed, (check - do you need the sleeve as no 2 below)

£15.00

2 164401002 Sleeve £4.00

3 164400502 (for ‘inside frame’ only)

Clutch cable, N.S. models with ‘pear drop’ nipple at lever end. (Including ‘split’ adjuster)

£15.00

3 294400503 (for ‘outside frame’)

Clutch cable, N23, S23. F. Models. £18.00

4/11 164400023 Nipple seat 5.00 ea.

5 164400046 ‘Split’ adjuster for clutch cable L, N23, S23, F. models

£4.80

6 164401504 Decompressor cable, for all models except L £15.00

6 164401504 Decompressor cable only - new old stock - shop soiled - in original Romac box)

£12.00

7 164400931 Decompressor cable nipple seat £4.50

8 164400021 Nipple (solderless) £3.00

9 164400501 Front brake cable, up to frame no. 482754 (with adjuster on bottom)

£15.00

10 164402501 Front brake cable, after frame no. 482755 (with adjuster at top)

£15.00

10 164402501 Front brake cable, - new, old stock. £12.00

- 294400502 (with adjuster at bottom)

Front brake cable for S23/2, F models with alloy 124mm hub/ brake drum

£15.00

12/12A 164400003/294400001 Rubber hose (80mm or 62mm) £3.00

13 (1) 164400506 (same nipple both ends)

Throttle cable Quickly N up to frame/eng. no. 268490 throttle Cable circulates “open” on the twist grip”, nipple is visible 2.5mm bent tube adjuster

£14.00

13 (2) 164401506

Throttle cable Quickly N & S with 26” wheels from frame no 268491 to 651958 with choke in frame (2.4mm peanut nipple), barrel nipple lever end, adjuster bent tube

£14.00

13 (3) 164401509

Throttle cable Quickly N & S with 26” wheels from frame no 651959 nipple is hidden on the grip nipple with approx. 5mm carburettor type 1/9/22

£14.00

13 (4) 164401509 Throttle cable Quickly N23 and S23 nipple is hidden on the grip nipple with approx. 5mm carburettor type 1/9/22

£14.00

13a 164400521

Throttle cable, N23, S23, S23/2, F models with adjuster at top, nipple is hidden on the grip nipple with approximately 5mm Carburettor type 1/1/127

£14.00

Throttle cables as above, new old stock, shop soiled.

£12.00

15 164400025 Rubber sleeve (for throttle cable entry into carburettor)

£4.00

16 164400001 Rubber sleeve, black. or beige (frame/cable grommet) (Rubber casing top)

£4.00

45 19 164400039 Protecting sleeve (casing for cable in frame) £3.00

20 164405503 Gear cable(s) – 3 speed. . (Supplied with original fitting instructions)

£21.00

21 164400056 Nipple, for gear change cable 3G (set) £7.00

22 165300509 Rear brake cable, F model. £20.00

Speedometer, Drive and Cable

46 Speedometer & drive etc.; (picture number)


48 169202505 (‘D’ shape)

Speedometer head, if fitted, from frame no. 299050 (k.p.h. only)

£105.00

- 000005999 Speedometer head – headlamp shell rubber gasket/seal, for speedometer no. 48

£4.50

48A 169205501 Speedometer head – chrome rim only to fit speedometer no. 48

£19.00

48B 168100931 Dummy cover, if fitted, from frame no. 299050 (for headlamp cut out)

£12.00

49 169200001 Spring clip £10.00

50A 169200503 Speedometer drive for N, S, L. 26" wheel with 10mm spindle (new/remade)

£25.00

50/B 169203503 (comes with foam washer)

Speedometer drive for N23, S23. 23" wheel with 10mm spindle (new/remade)

£25.00

50/C 299200503 Speedometer drive for S23/2, F23. 23" wheel with 12mm spindle (new/remade)

£25.00

51 169200502/O Speedometer drive cable for original 'VDO' drive

£18.00

51 169200502/N Speedometer drive cable for remade drive 50/A above

£19.00

51 169200502/O Speedometer drive cable for new/remade drive as 50/B above

£18.00

51 169200502/N Speedometer drive cable for new/remade drive as 50/C above

£18.00

51 169201502 Speedometer drive cable for Veigel type speedometers

£21.00

52 169200905 Felt Washer £2.00

47

Exhaust and Silencer

48

Exhaust/silencer; (picture number)


20 167100005 Exhaust pipe for system left (near-side)t engine no. 305017

£40.00

21 167101005 Exhaust pipe for system right (off-side) engine no. 305018

£40.00

22 167100002 Seal ring (exhaust gasket 2 needed)

£3.00 ea

23 167100001 Union £17.00

24 5221 Union/ring nut spanner - (the only correct tool to use)

£16.00

29 167101009 Baffle only £20.00

29A M4x8 DIN 86 Baffle securing screw £1.00

30 167100506 Spring £7.00

31 167102505 Silencer – complete with baffle £70.00

35 167102008 Silencer bracket to suit above £22.00

36 167103008 Silencer bracket Cavallino £17.00

- 162000501 Silencer bracket for F23 models only - please call for availability

POA

37/38/39 60601212 Bolt/nut/washer £3.50

40/41/42/43 167100006 Clip assembly £12.00

44/45 - Bolt/washer £1.50

49 Drive Chain and Brake Rod

50 Drive chain, chain guard, rear brake rod, rear brake cable (picture number)

Part Number

Description Price

Drive chain, chain guard, rear brake rod, rear brake cable for F23 models and chain guard for NSU Quick50

11 075752506 Brake rod only, up to frame no. 50340 (557 mm)

£18.00

- 75753506 Brake rod only for 23-S/2 models (505mm) – (with offside brake arm)

£18.00

16 165300006S

Clevis link £8.20

17 M5 DIN 934

Nut £0.50

18/19 165300005 Pin/circlip £3.20

20 165300900 Brake rod only, from frame no. 50341 up to 482754 (505 mm)

£18.00

20 165301502 Brake rod only after frame no. 482755 (557 mm)

£18.00

22 165300509 Rear brake cable - F23 models £19.00

25 165400600 Drive chain, N. S. L. models, inc. connecting link (112 links)

£22.00

25/A 165400509 Drive chain, inc. connecting link (114 links) when fitted with 13T drive sprocket

£22.50

26 165400601 Connecting link £4.50

29/30 - Bolt/washer £1.50

28 165400501 Chain guard for N26,. S26, N23, S23 models only

£39.00

- 165400508 Chain guard for F23 models only Please call for availability

- 485400502 Chain guard for NSU Quick 50 models only (upper and lower)

£312.00

30 1653000013

Clevis link for F23 models £6.00

31 165300010 Clevis link pin £2.50

- 16530028 Protecting tube front - 27mm - F23 models £3.50

32 16530019 Protecting tube rear - 75mm - F23 models £3.50

51 Fuel Tank

52

Fuel tank, tap etc.; (picture number)


1 167201035 Tank badge (aluminium) pair £18.00

2 167201504 Filler cap, complete with washer for all tanks £20.00

3 167202504 Filler cap for all tanks with ‘Weltmeister’ logo (period cap as supplied in c1955)

£22.00

4 167200024 Filler cap washer £2.50

- 000050030 Anti-spill, foam, fuel cap collar in red, green or blue (as used in Germany)

£5.00 ea.

5 167200023 Tank transfer, ‘NSU’ in blue/white. 50 x 40mm (for 3.1 lts. tank) £14.00 pr.

6 167205023 Tank transfer, ‘Quickly’ in red, white or blue, 91 x 21mm (for 3.1 lts. tank)

£14.00 pr.

- 167206023 Tank transfer, ‘Quickly’ in red, orange or blue. 56 x 12mm (for 4.45 & 6.8 lts. tanks) -

£14.00 pr.

- 167207023 Tank transfer ‘Made in Germany’ in gold script. 70 x 14mm £14.00 pr.

7 16722305 New remade fuel tap complete with filter tube £21.00

8 167200904 Nut (with left- & right-hand thread) for original taps only £5.00

8A 167200905 Fuel strainer/filter for original tap only N/A

9A 167200902 Cap nut for original taps only £5.00

10 033104269/B Fuel hose, 200mm, 3/16" suitable for unleaded to SAE J30 R6 - black

£4.00

10 033104269/C Fuel hose, 200mm, 3/16" suitable for unleaded - clear plastic with braiding

£4.00

- - Fuel pipe clips (for above and 9 – 11mm O.D. hose) £3.00 ea.

10A 25090 ‘In-line’ fuel filter/strainer for above pipe – banish all those blocked jets

£6.00

11 167200049 Rubber Block for 6.8 litres tank £12.00

12 167200004S Rubber block for 3.l & 4.45 litres tanks £18.00 pr.

13 167200003 Chrome strap (for 3.1 litres 'peanut' tank)) £22.00

13 167201003 Chrome strap (for 4.45 litres tank) £22.00

14 167201007 Pad (to suit both above tanks) £8.00

14A 167200048 Cover strip (for 6.8 litres S23 & F23.tank) £18.00

15 167200010 Pin, rear £3.25

15A 163100023 Forked pin - for early models £8.20

15 -19 167200033 Bolt/pin, front/nut, rear pin - complete set. £8.50 set

22/23 M6x8DIN933/A6DIN137

Hex. Bolt & washer for 6.8 litres S23, F tank £1.00

24 167200531 Complete set only available for 6.8 litres S23, F 23 tank £26.00

25 Good Used Tanks please call for availability

53

Front and Rear Lighting

31

54

Front/rear lighting (picture number)


1 For illustration purposes only

Headlamp assembly without speedo. facility. af/n. 299049

-

2 For illustration purposes only

Headlamp assembly with speedo. facility. f/n. 299050a

-

2 Complete restored headlamp assemblies made up to special order only (No.2 shell - speedometer extra)

£140.00

2 168101516 From -

Headlamp shell only with speedo. Facility refurbished

£40.00

2a 168100914s Chrome rim “Quickly N’ without speedo

£40.00

3 168152914 Chrome headlamp rim with ‘hood’ for N.S.N23 & L models. f/n. 299050a

£40.00

4 168100925 Socket, - New, old stock - shop soiled £20.00

4A 298150916 Socket - New, old stock - shop soiled £20.00

4B 298150919 Terminal screw for 4 & 4A socket above £0.50

5 168101914 No 2-headlamp shell Chrome headlamp rim, for headlamp shell with speedo. cut out f/n. 299050a

£22.00

- 168152914 Chrome headlamp rim with hood for L model but will fit all later models

£25.00

6 168100917 Headlamp lens/rim seal £2.00

7 168100915 Lens/glass (with fins) for headlamp shell no.1 without speedo. a f/n. 299049

£20.00

7 168152915 Lens/glass for headlamp shell no. 2 with speedo. f/n. 299050a

£20.00

8 168100916 Reflector - German specification only - see note * below no 35

£20.00

9 168151918 Spring clip set of 3 £10.00

10 168100904 Dip switch/horn button, including clips, excluding cable

£24.00

10A 168100903 Dip switch/horn button to headlamp black 4 core cable

£4.00

11 168100514 /P Headlamp bulb, (6v. 15w/15w S.B.C.) Parallel pins

£8.00

11 168100515/OS Headlamp bulb (6v, 15w/15w S.B.C.) off-set pins MODIFIED BULB

£10.00

- 026104310 Bulb, 6v. 25w/25w. Bosch fitting (BA20D) for NSU Quick 50

£11.00

15 168101906 Switch contact bridge - 26mm £4.00

16 168101907 Spring £3.00

13 168101905 Switch lever only £7.00

13 to 18 168100925 Complete headlamp switch assembly £18.00

19 168100910 Rim clip £3.00 ea.

55 21 168100911 Knurled screw £4.50

22 168100912s Rubber grommet set of 3 for cables £3.75

23 168199934 Rubber grommet for speedo. Cable, f/n. 299050a

£1.00

24 168100931 Dummy cover, if fitted, f/n. 299050a £10.00

25 168100928 Bracket for headlamp, f/n. 299050a £20.00

26-28 - Bolt / washer/lock washer £1.50

29 168152959 Rear lamp complete with cream or black rubber back plate – please state

£39.00

29A 168150900 Top fixing screw £1.00

29B 168100014 Rubber backplate available in Cream or Black

£12.00

29C 168100502 Rear light oven type quickly N £45.00

- M5 x 20 DIN84 Rear lamp fixing screws/nuts/washers £1.50

31 168100506 6 volt/AC horn - modern equivalent with 'spade' terminals

£16.00

32 298150914 Headlamp lens/ glass for S23, S2/23 and F23. Models

£18.00

34 298150930 Screw/spring/nut assembly (for rim to reflector fixing and adjustment

£7.50

35 298102502

Complete oval chrome rim/lens/reflector/seal assembly For German spec. Single filament bulb socket only. The socket hole will need enlarging to take the larger twin filament bulb socket

£62.50

36 298150930 Screw complete with rubber ‘keep’ washer (bottom of rim)

£2.50

- M3x10DIN85 Screw – (top of oval rim) £1.00

43 Rear lamp bulb, 6v. 3w. Please state cap (9mm screw or bayonet or 15mm bayonet with centre contact)

£4.00 ea.

43A Rear lamp bulb 6v with low profile/height suitable for original NSU 23” rear lamps -

£4.00 ea.

44 Wipac style rear lamp complete with 6v, 3w. Bulb, as fitted to most U.K. spec. N.S. models

£20.00

- - Wipac style rear lamp lens only, as fitted to most U.K. spec. N.S. models

£13.00

- Rear mudguard mounted reflector. 6cm diameter with single M6 bolt/nut fixing

£4.50

- 168100517 or 168000501

Cable harness for 26” wheel N.S.L models or. N23. S23. F 23” models (Wiring Loom)

£14.00 ea.

- - Special purchase - 6v, 8w, 6v or 10w SCC 15mm bayonet, centre contact bulb

£4.00 ea.

168101909 Spring for bulb £4.50

1681009125 Rubber grommet set of 3 for headlamp £3.75

56

Cables for the Model L

57

Control cables for the Model L- For non-specific parts refer to other pages; (picture number)


1 164402504 Decompressor cable £14.00

2 164400511 Solderless nipple £3.00

3 164401502 New Clutch cable including adjuster no. 5

£15.00

4/10 164400023 Nipple seat £5.00

5 164400046 'Split' adjuster £4.50

7 164403503 Gear change cable - 2 speed - (new, old stock)

£12.00

8 164401002 Sleeve £3.50

9 164403501 Front brake cable including adjuster no. 5 - (new, old stock)

£15.00

13 164402509 Throttle cable £15.00

14 164400025 Rubber sleeve £4.00

58

Handlebars, controls and Speedo for the Model L

59

Handlebars, controls, headlamp & speedo for the Model L- (picture number

Part Number Description Handlebars, controls, headlamp & speedo for the Model L- For non-specific parts refer to other pages; (picture number

Price

1 168152914 Chrome headlamp rim with 'hood £30.00

2 to 11 See page 8

- 168102509 Dip switch (special order only)

12 164300519 Front brake lever £25.00

17/29 194300020 Cream rubber plate 6.50 ea.

18 164401921 Washer £2.00

19 164403900 Throttle twist grip housing only please call for availability POA

23 169200905 Felt Washer £2.00

24 169200503 Speedo Drive (remade) £25.00

25 169200502N Speedo Cable for above drive £18.00

26 164300036 Speedo spring £5.00

27 164300037 Speedo spring bracket £4.00

28 164402904 Throttle twist grip sleeve in cream £22.00

38 164401909 Decompressor lever £15.00

39/40 164401923 Decompressor lever screw and washer £3.50

44 164401904 Clutch/Gear change twist grip in cream Please call for availability

POA

45 164401907 Clutch lever £17.00

46/47/48 164400908 Screw/nut/washer for clutch lever £3.00

49 164300035 'NSU Quickly badge N/A

60 Rear suspension for the Model L

Rear suspension for the Model L- For non-specific parts refer to other pages; (picture number)


2 163200008 Swinging arm bush £10.00 ea.

3/4 163200016/17 Shim £4.00

5/6 163201504 Swinging arm bolt including grease nipple

£16.00

8 163200506 Rod £10.00

12 7 DIN 6799 Circlip £0.50

13 163200012 Cap - left hand POA

13 163200019 Cap - right hand POA

14 164104010 Spring £14.00 ea.

15 163200509 Rubber bush £6.50 ea.

17 M5 DIN 934 Nut £0.50 ea.

61 Frame , front forks, side stand, chain guards, spokes and rear brake cable

62 Frame , front forks, side stand, chain guards, spokes and rear brake cable


1 165300505 Rear brake cable £18.00

2 165300013 Clevis link £7.00

43924 165300010/115300002 Pin/circlip £3.20

5 163100516 Luggage strip inserts - cream rubber

£40 pair

6 163100530 Used rear section frame/cover for restoration please call

6a 163100079 Cream Rubber Plug £4.00

7 163100073 Alloy frame cover £22.00

8 163100058 Frame moulding £18.75

10 163100071 'Quickly' emblems in chrome £15.00 ea.

11 169500059 Centre stand spring clip- front £5.00

12 169300060 Centre stand spring clip- rear £5.00

13/14 M6x10 DIN933 Bolt /washer for above £1.50

15/16 M6x12 DIN933 Bolt/washer for side stand support

£1.50

17 169301507 Side stand support only £20.00

18 169301509 Side stand complete with rubber foot (special order only)

£58.00

19 169300044 Side stand cream rubber foot £6.50

20 165401001 Chain guard (base metal - not painted) special order only

£90.00

21/22 M6x8 DIN 933 Bolt/washer £1.50

23 163100066 Rear mudguard badge (red 'NSU' letters)

N/A

24 164100090 Front suspension cover plate - right

POA

24 164100089 Front suspension cover plate - left POA

25 160101501 Chain /clutch cover for L model (special order only)

£90.00

28 167103008 Silencer bracket in chrome £20.00

29/30 M6x15 DIN 933 Silencer bracket bolt/washer £1.50

- 165203020 (36 spokes x 233mm)

Chrome spokes & nipples for L models, 26”-wheel, full width hubs

£48.00

63 Front Hub and Brake Assembly no 1 up to frame number 482754 (90mm drum diameter & alloy brake back plate)

64 Front Hub & brake assembly No. 1 a f/n.482754 (90mm drum diameter & alloy brake back plate); (picture number)


1 165101900 Front hub shell only (no bearings, spindle or brake)

£40.00

2 165100023 Ball race £12

4 165200015 Cone, right. Up to a f/n 261860 (47mm) £20.00 ea.

5 165201015 Cone, right after f/n 261861 (54mm) £20.00 ea.

6/13 165100045 Seal ring £6.00 ea.

7/14 165100044 Ball cage £14.00 ea.

8/9 165201017/2017 Spacer, please state a f/n. 261860 or f/n. 261861 a (39mm long)

£4.00 ea.

10 165200037 Tolerance ring £7.50 ea.

11 165200016 Cone, left. up to a f/n. 261860 (36mm) £20.00 ea.

12 165201016 Cone left. after f/n. 261861 (43mm) £20.00 ea.

- 165101027 Brake operating cam £10.00

16 165100502 Brake lever, complete with cable nipple yoke £20.00

17 165100035 Spring £6.50

18 015099180 Yoke £6.00

- 5x8 DIN 660 Rivet, for above £0.50

19 165101509 Brake shoes £35.00 pr.

20/21 165201304 Brake linings complete with rivets £21.00 pr.

22 165100030 Brake shoes springs for 19 above (pair recommended)

£11.00 pr.

23 165100025 Nut £3.75

24 165100017 Spacer ring (to replace speedo. drive when omitted)

£2.00

25 165100028 Spindle £18.00

26 165100036 Spindle nut £3.50 ea.

F & R. Chrome spokes/nipples to fit N26 hub no.1 and to fit our remade rim

£43.00 set

F & R. Chrome spokes/nipples to fit N26 hub no. 1 and to fit original rim

£43.00 set

65 Front Wheel Hub and Brake assembly with 90mmbrake No after frame number 482755 (90mm drum and pressed steel backplate)

66 Front Hub & brake assembly with 90mm brake No. 2 f/n. after 482755 (90mm drum & pressed steel backplate);(picture number)


2 165100023 Ball race £12.00 ea.

3 165101015 Cone, right (54mm) £20.00 ea.

4 165100045 Seal ring £6.00 ea.

5 165100044 Ball cage £14.00 ea.

6 165202017 Spacer £9.00

7 165100037 Tolerance ring £7.50

8 165201016 Cone, left (43mm) £20.00

11 165104503 Brake backplate only £25.00

12 165203026 Bush £10.00

13 165103027 Brake operating cam £10.00

14 165101502 Brake lever £15.00

15 165101035 Spring £6.25

16 B7 DIN 137 Spring washer £1.00

17 165201043 Nut £2.00

18 165102509 Brake shoes £35.00 pr.

19/20 165201034 Brake linings complete with rivets

£22.00 pr

21 165103030 Brake shoes ‘V’ spring for 18 above (pair recommended)

£11.00 pr

22 165100054 Cone/backplate shim £4.00

23 165100025 Nut £4.00

25 165102028 Spindle £18.00

26 165100036 Spindle nut £3.50 ea.

165201040K (36 spokes = set)

F & R. Chrome spokes/nipples to fit N26 & .S26. Hub no, 2 and to fit our remade rim

£43.00 set

165201040G (36 spokes = set

F & R Chrome spokes/nipples to fit N26 & S26 hub no. 2 and to fit original rim

£43.00 set

165102924/G (36 spokes = set)

F & R. Chrome spokes/nipples for N23 models, with hub no. 2 and to fit original rim

£43.00 set

165191906/G (36 spokes = set)

F & R. Chrome spokes/nipples for S23 &, Cavallino with hub no. 2A

£43.00 set

67 Front Hub and Brake Assembly no 3 S23/2 & F23 models (126mm alloy drum diameter)

68 Front Hub & brake assembly No. 3 S23/2 & F23. Models (126mm alloy drum diameter);(picture number)


1 295100507 Hub Please call for availability

3 295100025 Bearings (pair recommended)

£24.00 pr.


7 075751030 Seal ring £1.00

8 295100019 Spring £8.50

10 B7 DIN125 Washer (plain) £0.70

11 165201043 Nut £2.50

12 295100501 Brake shoes. (Pair recommended)

£35.00 pr.

15 295100014 Spring £10.00 ea.

16 295100006 Spindle £18.00

17 25103290 Spindle nut £3.00 ea.

18 25103744 Spindle nut with shoulder for F23 models

£5.50 ea.

295200024/G (36 spokes x 208mm)

F & R. Chrome spokes/nipples for S23/2 & F23 models with hub no. 3

£43.00 set

19 1652000046 Cover for rear wheel galvanised

£30.00

69 Rear Hub and Brake assembly No 1 up to frame number 482754 (90mm drum diameter & alloy backplate)

70 Rear Hub & brake assembly No. 1 af/n 482754 (90mm drum diameter & alloy backplate); (picture number)


1 165202900 af/n.4827549 Rear wheel hub shell only, c/w 36t sprocket (no bearings, brake, spindle)

£43.00

2 165100023 Ball race £12.00 ea.

4 165200015 Cone, left. Up to af/n.259464 (47mm) £20.00 ea.

5 165201015 Cone, left. f/n.259465 a (54mm) £20.00 ea.

6/13 165100045 Seal ring £6.00 ea.

7/14 165100044 Ball cage £14.00 ea.

8/9 165201017/165202017 Spacer, please state af/n.259464 or f/n. 259465 a

£8.75 ea.

10 165200037 Tolerance ring £7.50 ea.

11 165200016 Cone, right up to af/n. 259464 (36mm)

£20.00 ea.

12 165201016 Cone, right. f/n. 259465 a (43mm) £20.00 ea.

15 165200031 Circlip. f/n. 67501 a 482754 £12.25

17 165201021 Spring £6.25

- 165101027 Brake operating cam £12.00

18 165201003 Brake lever £12.50

19 165101509 Brake shoes £35.00 pr.

20/21 165201034 Brake linings complete with rivets £24.00 pr.

22 165100030 Brake shoes springs for 19 above (pair recommended)

£11.00 pr.

23 165100025 Nut £4.00

24 165201018 Spacer £4.00

25/26/27 165200011 Chain adjuster assembly £10.00 ea.

28 165200014 Spindle £18.00

29 165101036 Spindle nut with shoulder £8.00 ea.

71

Rear Hub and Brake assembly No 2 from frame number 482755 (90mm drum a and pressed steel backplate)

72

Rear Hub & brake assembly No. 2 f/n. 482755 a (90mm drum diameter & pressed steel backplate); (picture number)


2 165100023 Ball race £12.00 ea.

3 165203500 Sprocket, 36t £39.00

4/5/6 165201044 Bolt/nut/washer set of 6 £8.00

7 165201015 Cone, left (54mm) £20.00

8/13 165100045 Seal ring £6.00 ea.

9/14 165100044 Ball cage £14.00 ea.

10 165202017 Spacer £8.75

11 165200037 Tolerance ring £7.50

12 165201016 Cone, right (43mm) £20.00

15/16 165201518 Brake plate with 16 bush. New, shop soiled.

£28.00

15 to 25 165202509 Brake plate with shoes, spring & cam. New, shop soiled

£35.00

16 165203026 Bush £10.00

17 165203021 Spring £6.50


19 165203003 £12.50

Brake lever £12.00

20 B7 DIN 137 Spring washer £0.80

21 165201043 Nut £3.00

22 165102509 Brake shoes £32.00pr.

23/24 165201034 Brake linings complete with rivets

£24.00 pr.

25 165103030 Brake shoes ‘V’ spring for 22 above (pair recommended)

£11.00 pr.

26 165200046 Cover £25.00

27 165100054 Cone/backplate shim £4.00

28 165200049 Nut £4.25

29 165201018 Spacer £8.75

30/31/32 165200011 Chain adjuster assembly £10.00 ea.

33 165201014 Spindle £18.00

34 165101036 Spindle nut with shoulder £8.00 ea.

73 Rear Hub and Brake assembly No 3 for S23/2 &F23 Models (126mm all alloy drum diameter-alloy rims)

74

Tyres Part Number Description Price

Rear Hub & brake assembly No. 2 f/n. 482755 a (90mm drum diameter & pressed steel backplate); (picture number)


2 295201002 Sprocket, 36t £37.50

3/4 - Nut-washer 1.00 pr

6 295100025 Bearing (pair recommended) £24.00 pr.

7 295100513 Spacer (front & rear) £18.00 ea.


13 075751030 Seal ring £3.00

14 295200007 Spring £8.50

15 295200023 Brake lever £20.00

16 M7DIN125 Washer (plain) £0.50

17 165201043 Nut £3.75

18 295100501 Brake shoes £35.00 pr.

19 295100014 V Spring for 18 above £10.00 ea.

20 165200068 Spring £8.50

21 5 DIN 6799 Spring Circlip £2.00

22 295200016 Spacer left - large – used only £12.00

23 165200060 Spindle £18.00

24 295200013 Spacer – small – used only £9.30

25/27 295200013 Chain adjuster assembly £10.00 ea.

28 B12 DIN137 Spring washer £1.00 ea.

29 25103290 Spindle nut £3.00 ea.

30 25103744 Spindle nut with shoulder for F23 models

£5.50 ea.

75 26 x 2.00 black tyre (2 x 22 - Moped)) made by Continental (to fit our 26 x 2.00 rims)

£39.99

26 x 2.00 black tyre (2 x 22) made in Turkey by I.R.C – slightly smaller profile and cross section than above

£36.00

26 x 2.00 black/whitewall tyre (2 x 22) made in Turkey by I.R.C

£41.00

23 x 2.00 black tyre (2 x 19) – made by Continental £36.00

23 x 2.00 black/whitewall tyre (19 x 2) made by Continental

£44.00

23 x 2.25 black tyre by Continental (2 ¼ x 19) -

£42.00

23 x 2.25 black/whitewall tyre (2.25 x 19) made by Continental.

£44.00

23 x 2.50 black tyre (2½ x 19) – made by Continental £44.00

23 x 2.50 black/whitewall tyre (2.50 x 19) made by Continental or I.R.C

£44.00

26” x 2.00 inner tube – made by Continental £19.99

23” x 2.00 (2 x 19) inner tube (economy) £15.00

23” x 2.00 (2 x 19) inner tube - made by Continental £19.99

23 x 2.25 / 2.50 (19 x 2.25/2.50) inner tubes £15.00

26 or 23” rubber rim tapes £6.00 ea.

Rims; Part Number Description Price

165201038 26 x 2.00 chrome rim (non countersunk nipple holes)

£40.00

16510047E 26 x 2.00 chrome rim (non countersunk nipple holes) extra chrome

£61.00

0300023200A 26 x 2.00 rim ready painted in light green or light grey

£70.00

165100047 26 x 2.00 bare metal rim (non countersunk nipple holes)

£35.00

165102047 26 x 2,25 chrome rim (with countersunk nipple holes -)

£58.00

020023200 23 x 2.00 chrome rim (non countersunk nipple holes)

£39.00

020023200E 23 x 2.00 chrome rim (non countersunk nipple holes) extra chrome

£58.00

* 030023200 23 x 2.00 bare metal rim (non countersunk nipple holes)

£26.00

* 031023200 (only 1 left)

23 x 2.00 black rim (with countersunk nipple holes,) £28.50

* 295201115 23 x 2.25 chrome rim (with countersunk nipple holes £53.00

* 295201015 23 x 2.50 chrome rim (with countersunk nipple holes £58.00

FOR CHROME PLATED SPOKES SEE BRAKE HUBS

76 Workshop tools and paints

77 Workshop tools and paints (picture number)


1 000005221 Exhaust ring nut spanner £15.00

2 48422007 Drive sprocket puller £19.00

3 169102904 Flywheel/magneto puller £20.00

3A 169102904/C Remade to original pattern, Thread protector 'cap' for magneto thread

£10.00

- - Steering headstock chrome nut box spanner

£9.50

- 169100905 Filler piece – to ‘fill’ pedal shaft cut outs when re-assembling engine

£5.00

4 169100900 6 piece. toolkit, similar as supplied with new machines

£23

- M8 die to 'clean up' the crankshaft threads (magneto and clutch ends)

£10.50

5 169300004 Rear carrier/lock with 2 x keys, for early N model

£24.00

6 Chrome tyre pump - to fit on luggage rack, frame or under saddle. includes cycle to Schrader valve adaptor

£19.00

169300502 Air Pump Silver with connection for car valve- classic model silver painted suitable for all models (except quickly L)

£27.00

10 - Circlip pliers with 4 changeable jaws, for internal or external ear circlips.

£9.00

11 169100910 Assembly bracket for clutch spring £18.00

12 169100908 2 x levers to remove clutch cup N/A

- - Set feeler gauges – Spark plug/points gap check, 13 blade, 0.05 – 1mm

£6.00

- - Pedal Spanner – 10” long for that extra leverage, for all pedals

£11.00

- 150ml. Bottle 2 stroke oil for all models, mineral based, 1 bottle sufficient for 5 lts petrol @ ratio 32:1

£5.00

- 150ml Bottle of gear oil, suitable for all models, with easy dispenser spout -

£6.50

- - Rear view mirror – oval shape – bracket fitting to handlebars

£18.00

- - Gasket and Jointing Compound 40g £9.99

- 000082031 Spoke Nipple Spanner £7.50

- 169100913 Holder for rotor and intermediate gear £30.00

78

Books, gift ideas, regalia etc.;(picture number)


13 Original fuel cap with ‘Weltmeister’ as fitted to early machines (m/cycle world champion 1953-55)

£20.00

15 Green/chrome/cream tank, Quickly small tank enamel lapel pin badge, shown actual size.

£9.00

16 Chrome ‘Quickly’ lapel pin badge, shown actual size.

£9.00

19 Blue baseball cap with blue/white ‘NSU’ badge – fits all sizes

£11.00

21 NSU Quickly mouse mat - see also page 16 £10.50

Mike Walkers book – ‘NSU The Complete Story’ Hard back, full colour and in English, 238 pages see also page 16

£28.00

NSU Quickly Alle Modelle + Quick 50.- 134 pages, A4 size, hardback script in German. Lots of descriptive black and colour pictures

including 1953 prototype Quickly and the record breaking 'Flying Cigar' machine - see also page 17 - Inc. post

£31.00

79

Photo-copied information etc. (picture number)

Description

Price

12 NSU Quickly & NSU Prima D accessories catalogue, includes wind & leg shields, pannier bags, tools saddle covers, etc. March 1958.

£8.00

17 Dealers Maintenance Manual, circa 1957 or 1962 £8.00 ea.

18 Illustrated spare parts book, c. 1955, 31 pages (suitable for 26” wheel models) -

£8.00

- Illustrated spare parts book, c. 1962, 66 pages (covers all 23” wheel models up to model F)

£10.00

- Pre. 1956 instruction book (small tank model) £5.50

- Post 1956 instruction book (1 gall. round tank model) £5.50

- Instruction book 23/S, 23-S/2, F models, (1½ gall. square tank models)

£5.50

- Road test from ‘The Motorcycle’ Jan 1955 £1.00

- ‘The Best from your Quickly’ 1955 (hints, tips, running & maintenance) -

£1.00

- 'Maintaining an NSU Quickly' - points, decoke, cables, clutch and chain adjustment, filter etc.

£1.00

Road test report, 1961,Quickly S2 (Rare 25” wheel 2-seater model) the latest model from NSU Quickly

£1.00

Bing Carburettor - dismantling, cleaning and service guide for 1/12 'starter' choke carburettors.

£1.00

Decompressor Valve - 'reseating and service guide' to all decompressor cylinder head valves

£1.00

John Jeffrey’s detailed restoration notes, facts & information about his small tank Quickly.

Neatly handwritten in 1968 by a past Quickly enthusiast. £5.00

Quickly – Cavallino – chassis/frame etc. 16-page supplement illustrated parts list, July 1958.

£5.00

Colour copy, sales leaflets; c.1954/55 small tank, left hand exhaust model N. or c.1956-on 26” N model

£6.50 ea.

- or c.1957 – on 26” S model, or c.1960 S/2 (rare 25” wheel model) or c.1960-on N23, S/23. S2/23 models

£6.50 ea.

80

Other NSU Spares Inc. Prima, Max etc. (picture number)

Description Price

Gasket Sets Nsu Prima D150CC.Scooter, 1956 -on decoke gasket set

£12.00

Nsu Prima 111kl 150CC.Scooter, 1960 -on decoke gasket set

£12.00

Nsu Prima 150CC.Scooter, engine gasket set £18.00

Nsu Prima V 175CC.Scooter,dekoke gasket set

£18.00

NSU MAX 247cc Motorcycle 1957-1962 decoke gasket Set

£18.00

NSU Motorrader Fridge Magnet in full colour £3.00

Memorabilia NSU Blue/Silver enamel pin badge original not a modern replica these badges were place in the front tool box with the tool kit with every new quickly supplied from the original dealer

£8.00

NSU Embroidered cloth badge Blue and Silver ideal for blazers, caps, shirts etc. size-94mm x 70mm

£9.00

NSU Key Ring/Fob- Blue/Silver on white enamel badge with brown leather fob

£8.00

NSU sign on semi rigid white plastic black/white and red 'Parking Only' 17 3/4 x 12" ideal for garage or shed

£16.00

Original Literature (not copies) ring first most are one offs

81

NSU Quickly 26" N.S.L c 1957-1959 models instruction book - Used Condition

£12.00

NSU Quickly spare parts lists - N23-S23-S23/2 Models 1962 in used condition - hard back in ring folder

£40.00

Nsu Prima D Maintenance Manual 1957 good condition

£25.00

Nsu Prima D spare parts list - good condition £25.00

Nsu Prima v original NSU spare parts list - good condition 1958 as new

£40.00

Nsu Prima 111, k, 111, v original NSU spare parts list - good condition 1958 as new

£40.00

Pitman’s Book of the NSU Quickly by R H Warring

Pitman’s Book of the NSU Quickly by R H Warring - first published 1959 these books are very informative and increasingly hard to find in good condition

£40.00

Copies NSU Quick 50 Copy illustrated parts book or illustrated works manual

£10.00

NSU Quick 50 Colour copy sales leaflet £8.00

Nsu Prima D scooter - copy illustrated spare parts book 1956 0r illustrated maintenance manual 1957

£10.00 ea.

NSU Quick 50 some copied information available mostly in German

Please Call

NSU- '130 Years in a few minutes' the rise and fall of the NSU empire colour downloads - 7 pages

£7.00

Please note all prices excluding post etc.

nsu quickly spare parts list · 2021. 1. 16. · nsu quickly spare parts list nsu quickly spares...

Documents