prueba macroetch-acv#010
TRANSCRIPT
MACROETCH TEST
4.11.1 Number and type of test specimenNumber and type of test specimens and range of thickness qualified
Wps qualification; filllet welds (see 4.11.1)
A fillet welded T-joint, asshown in Figure 4.19 for plate or Figure 4.20 for pipe(Detail A or Detail B), shall be made for
each WPS andposition to be used in construction
4.11.2. Fillet Weld TestTheweldment shall be cut perpendicular to the direction ofwelding at locations shown in Figure 4.19 or Figure
4.20as applicable. Specimens representing one face of eachcut shall constitute a macroetch test specimen and
shallbe tested in conformance with 4.8.4.
4.4.6.4. Macroetch Examination
Date:15/06/2008Test No. ACV#010.20AWS Code: D1.1
H1-2
T=3/8”ASTM A36