received nov 2 - utahstate of utah form 3 department of natural resources division of oil, gas and...

69
STATE OF UTAH FORM 3 DEPARTMENTOF NATURALRESOURCES DIVISIONOF OIL, GAS AND MINING AMENDED REPORT (highlight changes) 5. MINERALLEASE NO: 6. SURFACE: APPLICATION FOR PERMIT TO DRILL ML-45555 State 7. IF INDIAN,ALLOTTEEOR TRIBE NAME: 1A.TYPEOFWORK: DRILL REENTER DEEPEN NA 8. UNITorCA AGREEMENT NAME: B. TYPE OF WELL: OlL GAS O OTHER SINGLE ZONE MULTIPLEZONE Castle Draw 2. NAMEOF OPERATOR: 9. WELLNAMEand NUMBER: Newfield Production Company Castle Draw State N-2-9-17 3. ADDRESS OF OPERATOR: PHONE NUMBER: 10. FIELDAND POOL, OR WILDCAT: Route #3 Box 3630 crry Myton UT 84052 (435) 646-3721 Monument Butte 4. LOCATION OF WELL (FOOTAGES) .MER D ARNSECTION,TOWNSHlP, RANGE, AT SURFACE: SEINW 1977' FNL 1965' FWL SENW 2 9S 17E ATPROPOSEDPRODUCINGZONE: 2585' FNL 1330' FWL 39-/n9 )c W3972;ý yo-owoiP37 -/¾.97725 14 IS NOC IN MILES AND REmCOON FS MNEAREST TOWN OR PnOSTOFFICE: 13. STATEUTAH 15. DISTANCE TO NEAREST PROPERTY OR LEASE LINE (FEET) 16. NUMBEROF ACRES IN LEASE: 17. N JMBER OF ACRES ASSIGNED TO THIS WELL: Approx, 1330' f/Ise line, 1330' flunit line 640.20 acres 20 acres 18. DISTANCE TO NEAREST WELL (DRILLING,COMPLETED, OR 19. PROPOSED DEPTH: 20. BOND DESCRIPTION: APPLIED FOR) ON THIS LEASE (FEET) Approx. 1255' 6,055 Hartford Accident #4471291 21. ELEVATIONS (SHOW WHETHER DF, RT, GR, ETC.): 22. APPROXIMATEDATEWORK WLL START: 23. ESTIMATEDDURATION: 5049' GL (7) days from SPUD to rig release 24. PROPOSED CASING AND CEMENTING PROGRAM SIZE OF HOLE CASING SIZE, GRADE, AND WEIGHT PER FOOT SETTING DEPTH CEMENT TYPE, QUANTITY,YIELD,AND SLURRY WEIGHT 12 1/4 8 5/8 J-55 24.0 300 Class G w/2% CaCI 155 sx +/- 1.17 15.8 7 7/8 5 1/2 J-55 15.5 6,055 Lead(Prem Lite 11) 275 sx +/- 3.26 11.0 Tail (50/50 Poz) 450 sx +/- 1.24 14.3 25. ATTACHMENTS VERIFY THE FOLLOWING ARE ATTACHED IN ACCORDANCE WITH THE UTAH OIL AND GAS CONSERVATION GENERAL RULES: WELL PLAT OR MAP PREPARED BY LICENSED SURVEYOR OR ENGINEER COMPLETE DRILLINGPLAN EVIDENCE OF DIVISiON OF WATER RIGHTS APPROVAL FOR USE OF WATER FORM 5, IF OPERATOR IS PERSON OR COMPANYOTHER THAN THE LEASE OWNER NAME (PLEASE PRINT) TITLE Regulatory Specialist SIGNATURE DATE (This space for State use only) RECEIVED API NUMBERASSIGNED: APPROVAL: - - NOV 2 02008 (11/2001) 01V.0FOIL, GAS & STATE OF UTAH FORM 3 DEPARTMENTOF NATURALRESOURCES DIVISIONOF OIL, GAS AND MINING AMENDED REPORT (highlight changes) 5. MINERALLEASE NO: 6. SURFACE: APPLICATION FOR PERMIT TO DRILL ML-45555 State 7. IF INDIAN,ALLOTTEEOR TRIBE NAME: 1A.TYPEOFWORK: DRILL REENTER DEEPEN NA 8. UNITorCA AGREEMENT NAME: B. TYPE OF WELL: OlL GAS O OTHER SINGLE ZONE MULTIPLEZONE Castle Draw 2. NAMEOF OPERATOR: 9. WELLNAMEand NUMBER: Newfield Production Company Castle Draw State N-2-9-17 3. ADDRESS OF OPERATOR: PHONE NUMBER: 10. FIELDAND POOL, OR WILDCAT: Route #3 Box 3630 crry Myton UT 84052 (435) 646-3721 Monument Butte 4. LOCATION OF WELL (FOOTAGES) .MER D ARNSECTION,TOWNSHlP, RANGE, AT SURFACE: SEINW 1977' FNL 1965' FWL SENW 2 9S 17E ATPROPOSEDPRODUCINGZONE: 2585' FNL 1330' FWL 39-/n9 )c W3972;ý yo-owoiP37 -/¾.97725 14 IS NOC IN MILES AND REmCOON FS MNEAREST TOWN OR PnOSTOFFICE: 13. STATEUTAH 15. DISTANCE TO NEAREST PROPERTY OR LEASE LINE (FEET) 16. NUMBEROF ACRES IN LEASE: 17. N JMBER OF ACRES ASSIGNED TO THIS WELL: Approx, 1330' f/Ise line, 1330' flunit line 640.20 acres 20 acres 18. DISTANCE TO NEAREST WELL (DRILLING,COMPLETED, OR 19. PROPOSED DEPTH: 20. BOND DESCRIPTION: APPLIED FOR) ON THIS LEASE (FEET) Approx. 1255' 6,055 Hartford Accident #4471291 21. ELEVATIONS (SHOW WHETHER DF, RT, GR, ETC.): 22. APPROXIMATEDATEWORK WLL START: 23. ESTIMATEDDURATION: 5049' GL (7) days from SPUD to rig release 24. PROPOSED CASING AND CEMENTING PROGRAM SIZE OF HOLE CASING SIZE, GRADE, AND WEIGHT PER FOOT SETTING DEPTH CEMENT TYPE, QUANTITY,YIELD,AND SLURRY WEIGHT 12 1/4 8 5/8 J-55 24.0 300 Class G w/2% CaCI 155 sx +/- 1.17 15.8 7 7/8 5 1/2 J-55 15.5 6,055 Lead(Prem Lite 11) 275 sx +/- 3.26 11.0 Tail (50/50 Poz) 450 sx +/- 1.24 14.3 25. ATTACHMENTS VERIFY THE FOLLOWING ARE ATTACHED IN ACCORDANCE WITH THE UTAH OIL AND GAS CONSERVATION GENERAL RULES: WELL PLAT OR MAP PREPARED BY LICENSED SURVEYOR OR ENGINEER COMPLETE DRILLINGPLAN EVIDENCE OF DIVISiON OF WATER RIGHTS APPROVAL FOR USE OF WATER FORM 5, IF OPERATOR IS PERSON OR COMPANYOTHER THAN THE LEASE OWNER NAME (PLEASE PRINT) TITLE Regulatory Specialist SIGNATURE DATE (This space for State use only) RECEIVED API NUMBERASSIGNED: APPROVAL: - - NOV 2 02008 (11/2001) 01V.0FOIL, GAS & STATE OF UTAH FORM 3 DEPARTMENTOF NATURALRESOURCES DIVISIONOF OIL, GAS AND MINING AMENDED REPORT (highlight changes) 5. MINERALLEASE NO: 6. SURFACE: APPLICATION FOR PERMIT TO DRILL ML-45555 State 7. IF INDIAN,ALLOTTEEOR TRIBE NAME: 1A.TYPEOFWORK: DRILL REENTER DEEPEN NA 8. UNITorCA AGREEMENT NAME: B. TYPE OF WELL: OlL GAS O OTHER SINGLE ZONE MULTIPLEZONE Castle Draw 2. NAMEOF OPERATOR: 9. WELLNAMEand NUMBER: Newfield Production Company Castle Draw State N-2-9-17 3. ADDRESS OF OPERATOR: PHONE NUMBER: 10. FIELDAND POOL, OR WILDCAT: Route #3 Box 3630 crry Myton UT 84052 (435) 646-3721 Monument Butte 4. LOCATION OF WELL (FOOTAGES) .MER D ARNSECTION,TOWNSHlP, RANGE, AT SURFACE: SEINW 1977' FNL 1965' FWL SENW 2 9S 17E ATPROPOSEDPRODUCINGZONE: 2585' FNL 1330' FWL 39-/n9 )c W3972;ý yo-owoiP37 -/¾.97725 14 IS NOC IN MILES AND REmCOON FS MNEAREST TOWN OR PnOSTOFFICE: 13. STATEUTAH 15. DISTANCE TO NEAREST PROPERTY OR LEASE LINE (FEET) 16. NUMBEROF ACRES IN LEASE: 17. N JMBER OF ACRES ASSIGNED TO THIS WELL: Approx, 1330' f/Ise line, 1330' flunit line 640.20 acres 20 acres 18. DISTANCE TO NEAREST WELL (DRILLING,COMPLETED, OR 19. PROPOSED DEPTH: 20. BOND DESCRIPTION: APPLIED FOR) ON THIS LEASE (FEET) Approx. 1255' 6,055 Hartford Accident #4471291 21. ELEVATIONS (SHOW WHETHER DF, RT, GR, ETC.): 22. APPROXIMATEDATEWORK WLL START: 23. ESTIMATEDDURATION: 5049' GL (7) days from SPUD to rig release 24. PROPOSED CASING AND CEMENTING PROGRAM SIZE OF HOLE CASING SIZE, GRADE, AND WEIGHT PER FOOT SETTING DEPTH CEMENT TYPE, QUANTITY,YIELD,AND SLURRY WEIGHT 12 1/4 8 5/8 J-55 24.0 300 Class G w/2% CaCI 155 sx +/- 1.17 15.8 7 7/8 5 1/2 J-55 15.5 6,055 Lead(Prem Lite 11) 275 sx +/- 3.26 11.0 Tail (50/50 Poz) 450 sx +/- 1.24 14.3 25. ATTACHMENTS VERIFY THE FOLLOWING ARE ATTACHED IN ACCORDANCE WITH THE UTAH OIL AND GAS CONSERVATION GENERAL RULES: WELL PLAT OR MAP PREPARED BY LICENSED SURVEYOR OR ENGINEER COMPLETE DRILLINGPLAN EVIDENCE OF DIVISiON OF WATER RIGHTS APPROVAL FOR USE OF WATER FORM 5, IF OPERATOR IS PERSON OR COMPANYOTHER THAN THE LEASE OWNER NAME (PLEASE PRINT) TITLE Regulatory Specialist SIGNATURE DATE (This space for State use only) RECEIVED API NUMBERASSIGNED: APPROVAL: - - NOV 2 02008 (11/2001) 01V.0FOIL, GAS & STATE OF UTAH FORM 3 DEPARTMENTOF NATURALRESOURCES DIVISIONOF OIL, GAS AND MINING AMENDED REPORT (highlight changes) 5. MINERALLEASE NO: 6. SURFACE: APPLICATION FOR PERMIT TO DRILL ML-45555 State 7. IF INDIAN,ALLOTTEEOR TRIBE NAME: 1A.TYPEOFWORK: DRILL REENTER DEEPEN NA 8. UNITorCA AGREEMENT NAME: B. TYPE OF WELL: OlL GAS O OTHER SINGLE ZONE MULTIPLEZONE Castle Draw 2. NAMEOF OPERATOR: 9. WELLNAMEand NUMBER: Newfield Production Company Castle Draw State N-2-9-17 3. ADDRESS OF OPERATOR: PHONE NUMBER: 10. FIELDAND POOL, OR WILDCAT: Route #3 Box 3630 crry Myton UT 84052 (435) 646-3721 Monument Butte 4. LOCATION OF WELL (FOOTAGES) .MER D ARNSECTION,TOWNSHlP, RANGE, AT SURFACE: SEINW 1977' FNL 1965' FWL SENW 2 9S 17E ATPROPOSEDPRODUCINGZONE: 2585' FNL 1330' FWL 39-/n9 )c W3972;ý yo-owoiP37 -/¾.97725 14 IS NOC IN MILES AND REmCOON FS MNEAREST TOWN OR PnOSTOFFICE: 13. STATEUTAH 15. DISTANCE TO NEAREST PROPERTY OR LEASE LINE (FEET) 16. NUMBEROF ACRES IN LEASE: 17. N JMBER OF ACRES ASSIGNED TO THIS WELL: Approx, 1330' f/Ise line, 1330' flunit line 640.20 acres 20 acres 18. DISTANCE TO NEAREST WELL (DRILLING,COMPLETED, OR 19. PROPOSED DEPTH: 20. BOND DESCRIPTION: APPLIED FOR) ON THIS LEASE (FEET) Approx. 1255' 6,055 Hartford Accident #4471291 21. ELEVATIONS (SHOW WHETHER DF, RT, GR, ETC.): 22. APPROXIMATEDATEWORK WLL START: 23. ESTIMATEDDURATION: 5049' GL (7) days from SPUD to rig release 24. PROPOSED CASING AND CEMENTING PROGRAM SIZE OF HOLE CASING SIZE, GRADE, AND WEIGHT PER FOOT SETTING DEPTH CEMENT TYPE, QUANTITY,YIELD,AND SLURRY WEIGHT 12 1/4 8 5/8 J-55 24.0 300 Class G w/2% CaCI 155 sx +/- 1.17 15.8 7 7/8 5 1/2 J-55 15.5 6,055 Lead(Prem Lite 11) 275 sx +/- 3.26 11.0 Tail (50/50 Poz) 450 sx +/- 1.24 14.3 25. ATTACHMENTS VERIFY THE FOLLOWING ARE ATTACHED IN ACCORDANCE WITH THE UTAH OIL AND GAS CONSERVATION GENERAL RULES: WELL PLAT OR MAP PREPARED BY LICENSED SURVEYOR OR ENGINEER COMPLETE DRILLINGPLAN EVIDENCE OF DIVISiON OF WATER RIGHTS APPROVAL FOR USE OF WATER FORM 5, IF OPERATOR IS PERSON OR COMPANYOTHER THAN THE LEASE OWNER NAME (PLEASE PRINT) TITLE Regulatory Specialist SIGNATURE DATE (This space for State use only) RECEIVED API NUMBERASSIGNED: APPROVAL: - - NOV 2 02008 (11/2001) 01V.0FOIL, GAS &

Upload: others

Post on 25-Jan-2021

0 views

Category:

Documents


0 download

TRANSCRIPT

  • STATE OF UTAH FORM 3DEPARTMENTOF NATURALRESOURCES

    DIVISIONOF OIL,GAS AND MINING AMENDED REPORT(highlight changes)

    5. MINERALLEASE NO: 6. SURFACE:APPLICATION FOR PERMIT TO DRILL ML-45555 State

    7. IF INDIAN,ALLOTTEEOR TRIBE NAME:1A.TYPEOFWORK: DRILL REENTER DEEPEN NA

    8. UNITorCA AGREEMENT NAME:B. TYPE OF WELL: OlL GAS O OTHER SINGLE ZONE MULTIPLEZONE Castle Draw

    2. NAMEOF OPERATOR: 9. WELLNAMEand NUMBER:

    Newfield Production Company Castle Draw State N-2-9-173. ADDRESS OF OPERATOR: PHONE NUMBER: 10. FIELDAND POOL, OR WILDCAT:

    Route #3 Box 3630 crry Myton UT 84052 (435) 646-3721 Monument Butte4. LOCATIONOF WELL (FOOTAGES) .MER

    DARNSECTION, TOWNSHlP, RANGE,

    AT SURFACE: SEINW 1977' FNL 1965' FWL SENW 2 9S 17EATPROPOSEDPRODUCINGZONE: 2585' FNL 1330' FWL39-/n9 )c W3972;ý yo-owoiP37 -/¾.97725

    14 IS NOC IN MILESAND REmCOONFS M NEAREST TOWN OR PnOSTOFFICE: 13. STATEUTAH

    15. DISTANCE TO NEAREST PROPERTY OR LEASE LINE(FEET) 16. NUMBEROF ACRES IN LEASE: 17. NJMBER OF ACRES ASSIGNED TO THIS WELL:

    Approx, 1330' f/Ise line, 1330' flunit line 640.20 acres 20 acres18. DISTANCE TO NEAREST WELL (DRILLING,COMPLETED, OR 19. PROPOSED DEPTH: 20. BOND DESCRIPTION:

    APPLIED FOR) ON THIS LEASE (FEET)

    Approx. 1255' 6,055 Hartford Accident #447129121. ELEVATIONS (SHOW WHETHER DF, RT, GR, ETC.): 22. APPROXIMATEDATEWORK WLL START: 23. ESTIMATEDDURATION:

    5049' GL (7) days from SPUD to rig release

    24. PROPOSED CASING AND CEMENTING PROGRAMSIZE OF HOLE CASING SIZE, GRADE, ANDWEIGHT PER FOOT SETTING DEPTH CEMENT TYPE, QUANTITY,YIELD,AND SLURRY WEIGHT

    12 1/4 8 5/8 J-55 24.0 300 Class G w/2% CaCI 155 sx +/- 1.17 15.8

    7 7/8 5 1/2 J-55 15.5 6,055 Lead(Prem Lite 11) 275 sx +/- 3.26 11.0

    Tail (50/50 Poz) 450 sx +/- 1.24 14.3

    25. ATTACHMENTS

    VERIFY THE FOLLOWING ARE ATTACHED INACCORDANCE WITHTHE UTAHOILANDGAS CONSERVATION GENERAL RULES:

    WELL PLAT OR MAP PREPARED BY LICENSED SURVEYOR OR ENGINEER COMPLETE DRILLINGPLAN

    EVIDENCE OF DIVISiONOF WATER RIGHTS APPROVAL FOR USE OF WATER FORM 5, IF OPERATOR IS PERSON OR COMPANYOTHER THANTHE LEASE OWNER

    NAME(PLEASE PRINT) TITLE Regulatory Specialist

    SIGNATURE DATE

    (This space for State use only)

    RECEIVEDAPI NUMBERASSIGNED: APPROVAL:

    -

    - NOV202008(11/2001) 01V.0FOIL,GAS&

    STATE OF UTAH FORM 3DEPARTMENTOF NATURALRESOURCES

    DIVISIONOF OIL,GAS AND MINING AMENDED REPORT(highlight changes)

    5. MINERALLEASE NO: 6. SURFACE:APPLICATION FOR PERMIT TO DRILL ML-45555 State

    7. IF INDIAN,ALLOTTEEOR TRIBE NAME:1A.TYPEOFWORK: DRILL REENTER DEEPEN NA

    8. UNITorCA AGREEMENT NAME:B. TYPE OF WELL: OlL GAS O OTHER SINGLE ZONE MULTIPLEZONE Castle Draw

    2. NAMEOF OPERATOR: 9. WELLNAMEand NUMBER:

    Newfield Production Company Castle Draw State N-2-9-173. ADDRESS OF OPERATOR: PHONE NUMBER: 10. FIELDAND POOL, OR WILDCAT:

    Route #3 Box 3630 crry Myton UT 84052 (435) 646-3721 Monument Butte4. LOCATIONOF WELL (FOOTAGES) .MER

    DARNSECTION, TOWNSHlP, RANGE,

    AT SURFACE: SEINW 1977' FNL 1965' FWL SENW 2 9S 17EATPROPOSEDPRODUCINGZONE: 2585' FNL 1330' FWL39-/n9 )c W3972;ý yo-owoiP37 -/¾.97725

    14 IS NOC IN MILESAND REmCOONFS M NEAREST TOWN OR PnOSTOFFICE: 13. STATEUTAH

    15. DISTANCE TO NEAREST PROPERTY OR LEASE LINE(FEET) 16. NUMBEROF ACRES IN LEASE: 17. NJMBER OF ACRES ASSIGNED TO THIS WELL:

    Approx, 1330' f/Ise line, 1330' flunit line 640.20 acres 20 acres18. DISTANCE TO NEAREST WELL (DRILLING,COMPLETED, OR 19. PROPOSED DEPTH: 20. BOND DESCRIPTION:

    APPLIED FOR) ON THIS LEASE (FEET)

    Approx. 1255' 6,055 Hartford Accident #447129121. ELEVATIONS (SHOW WHETHER DF, RT, GR, ETC.): 22. APPROXIMATEDATEWORK WLL START: 23. ESTIMATEDDURATION:

    5049' GL (7) days from SPUD to rig release

    24. PROPOSED CASING AND CEMENTING PROGRAM

    SIZE OF HOLE CASING SIZE, GRADE, ANDWEIGHT PER FOOT SETTING DEPTH CEMENT TYPE, QUANTITY,YIELD,AND SLURRY WEIGHT

    12 1/4 8 5/8 J-55 24.0 300 Class G w/2% CaCI 155 sx +/- 1.17 15.8

    7 7/8 5 1/2 J-55 15.5 6,055 Lead(Prem Lite 11) 275 sx +/- 3.26 11.0

    Tail (50/50 Poz) 450 sx +/- 1.24 14.3

    25. ATTACHMENTS

    VERIFY THE FOLLOWING ARE ATTACHED INACCORDANCE WITHTHE UTAHOILANDGAS CONSERVATION GENERAL RULES:

    WELL PLAT OR MAP PREPARED BY LICENSED SURVEYOR OR ENGINEER COMPLETE DRILLINGPLAN

    EVIDENCE OF DIVISiONOF WATER RIGHTS APPROVAL FOR USE OF WATER FORM 5, IF OPERATOR IS PERSON OR COMPANYOTHER THANTHE LEASE OWNER

    NAME(PLEASE PRINT) TITLE Regulatory Specialist

    SIGNATURE DATE

    (This space for State use only)

    RECEIVEDAPI NUMBERASSIGNED: APPROVAL:

    -

    - NOV202008(11/2001) 01V.0FOIL,GAS&

    STATE OF UTAH FORM 3DEPARTMENTOF NATURALRESOURCES

    DIVISIONOF OIL,GAS AND MINING AMENDED REPORT(highlight changes)

    5. MINERALLEASE NO: 6. SURFACE:APPLICATION FOR PERMIT TO DRILL ML-45555 State

    7. IF INDIAN,ALLOTTEEOR TRIBE NAME:1A.TYPEOFWORK: DRILL REENTER DEEPEN NA

    8. UNITorCA AGREEMENT NAME:B. TYPE OF WELL: OlL GAS O OTHER SINGLE ZONE MULTIPLEZONE Castle Draw

    2. NAMEOF OPERATOR: 9. WELLNAMEand NUMBER:

    Newfield Production Company Castle Draw State N-2-9-173. ADDRESS OF OPERATOR: PHONE NUMBER: 10. FIELDAND POOL, OR WILDCAT:

    Route #3 Box 3630 crry Myton UT 84052 (435) 646-3721 Monument Butte4. LOCATIONOF WELL (FOOTAGES) .MER

    DARNSECTION, TOWNSHlP, RANGE,

    AT SURFACE: SEINW 1977' FNL 1965' FWL SENW 2 9S 17EATPROPOSEDPRODUCINGZONE: 2585' FNL 1330' FWL39-/n9 )c W3972;ý yo-owoiP37 -/¾.97725

    14 IS NOC IN MILESAND REmCOONFS M NEAREST TOWN OR PnOSTOFFICE: 13. STATEUTAH

    15. DISTANCE TO NEAREST PROPERTY OR LEASE LINE(FEET) 16. NUMBEROF ACRES IN LEASE: 17. NJMBER OF ACRES ASSIGNED TO THIS WELL:

    Approx, 1330' f/Ise line, 1330' flunit line 640.20 acres 20 acres18. DISTANCE TO NEAREST WELL (DRILLING,COMPLETED, OR 19. PROPOSED DEPTH: 20. BOND DESCRIPTION:

    APPLIED FOR) ON THIS LEASE (FEET)

    Approx. 1255' 6,055 Hartford Accident #447129121. ELEVATIONS (SHOW WHETHER DF, RT, GR, ETC.): 22. APPROXIMATEDATEWORK WLL START: 23. ESTIMATEDDURATION:

    5049' GL (7) days from SPUD to rig release

    24. PROPOSED CASING AND CEMENTING PROGRAM

    SIZE OF HOLE CASING SIZE, GRADE, ANDWEIGHT PER FOOT SETTING DEPTH CEMENT TYPE, QUANTITY,YIELD,AND SLURRY WEIGHT

    12 1/4 8 5/8 J-55 24.0 300 Class G w/2% CaCI 155 sx +/- 1.17 15.8

    7 7/8 5 1/2 J-55 15.5 6,055 Lead(Prem Lite 11) 275 sx +/- 3.26 11.0

    Tail (50/50 Poz) 450 sx +/- 1.24 14.3

    25. ATTACHMENTS

    VERIFY THE FOLLOWING ARE ATTACHED INACCORDANCE WITHTHE UTAHOILANDGAS CONSERVATION GENERAL RULES:

    WELL PLAT OR MAP PREPARED BY LICENSED SURVEYOR OR ENGINEER COMPLETE DRILLINGPLAN

    EVIDENCE OF DIVISiONOF WATER RIGHTS APPROVAL FOR USE OF WATER FORM 5, IF OPERATOR IS PERSON OR COMPANYOTHER THANTHE LEASE OWNER

    NAME(PLEASE PRINT) TITLE Regulatory Specialist

    SIGNATURE DATE

    (This space for State use only)

    RECEIVEDAPI NUMBERASSIGNED: APPROVAL:

    -

    - NOV202008(11/2001) 01V.0FOIL,GAS&

    STATE OF UTAH FORM 3DEPARTMENTOF NATURALRESOURCES

    DIVISIONOF OIL,GAS AND MINING AMENDED REPORT(highlight changes)

    5. MINERALLEASE NO: 6. SURFACE:APPLICATION FOR PERMIT TO DRILL ML-45555 State

    7. IF INDIAN,ALLOTTEEOR TRIBE NAME:1A.TYPEOFWORK: DRILL REENTER DEEPEN NA

    8. UNITorCA AGREEMENT NAME:B. TYPE OF WELL: OlL GAS O OTHER SINGLE ZONE MULTIPLEZONE Castle Draw

    2. NAMEOF OPERATOR: 9. WELLNAMEand NUMBER:

    Newfield Production Company Castle Draw State N-2-9-173. ADDRESS OF OPERATOR: PHONE NUMBER: 10. FIELDAND POOL, OR WILDCAT:

    Route #3 Box 3630 crry Myton UT 84052 (435) 646-3721 Monument Butte4. LOCATIONOF WELL (FOOTAGES) .MER

    DARNSECTION, TOWNSHlP, RANGE,

    AT SURFACE: SEINW 1977' FNL 1965' FWL SENW 2 9S 17EATPROPOSEDPRODUCINGZONE: 2585' FNL 1330' FWL39-/n9 )c W3972;ý yo-owoiP37 -/¾.97725

    14 IS NOC IN MILESAND REmCOONFS M NEAREST TOWN OR PnOSTOFFICE: 13. STATEUTAH

    15. DISTANCE TO NEAREST PROPERTY OR LEASE LINE(FEET) 16. NUMBEROF ACRES IN LEASE: 17. NJMBER OF ACRES ASSIGNED TO THIS WELL:

    Approx, 1330' f/Ise line, 1330' flunit line 640.20 acres 20 acres18. DISTANCE TO NEAREST WELL (DRILLING,COMPLETED, OR 19. PROPOSED DEPTH: 20. BOND DESCRIPTION:

    APPLIED FOR) ON THIS LEASE (FEET)

    Approx. 1255' 6,055 Hartford Accident #447129121. ELEVATIONS (SHOW WHETHER DF, RT, GR, ETC.): 22. APPROXIMATEDATEWORK WLL START: 23. ESTIMATEDDURATION:

    5049' GL (7) days from SPUD to rig release

    24. PROPOSED CASING AND CEMENTING PROGRAM

    SIZE OF HOLE CASING SIZE, GRADE, ANDWEIGHT PER FOOT SETTING DEPTH CEMENT TYPE, QUANTITY,YIELD,AND SLURRY WEIGHT

    12 1/4 8 5/8 J-55 24.0 300 Class G w/2% CaCI 155 sx +/- 1.17 15.8

    7 7/8 5 1/2 J-55 15.5 6,055 Lead(Prem Lite 11) 275 sx +/- 3.26 11.0

    Tail (50/50 Poz) 450 sx +/- 1.24 14.3

    25. ATTACHMENTS

    VERIFY THE FOLLOWING ARE ATTACHED INACCORDANCE WITHTHE UTAHOILANDGAS CONSERVATION GENERAL RULES:

    WELL PLAT OR MAP PREPARED BY LICENSED SURVEYOR OR ENGINEER COMPLETE DRILLINGPLAN

    EVIDENCE OF DIVISiONOF WATER RIGHTS APPROVAL FOR USE OF WATER FORM 5, IF OPERATOR IS PERSON OR COMPANYOTHER THANTHE LEASE OWNER

    NAME(PLEASE PRINT) TITLE Regulatory Specialist

    SIGNATURE DATE

    (This space for State use only)

    RECEIVEDAPI NUMBERASSIGNED: APPROVAL:

    -

    - NOV202008(11/2001) 01V.0FOIL,GAS&

  • T9S, RP7E, S.L.B.&M. Nimiza PRODorios coxPArrN89°58'E (G.L.O.) WELL LOCATION, CASTLE DRAW N-2-9-17,SB9 J7'48"E - 264Z78' (Meas.)

    LOCATED AS SHOWN IN THE SE 1/4 NWs','oss cap År'osscop 1 1/4 OF SECTION 2, T9S, R17E, S.L.B.&M.

    UINTAH COUNTY, UTAH.

    Lot 3 Lot 2 Lot 1Lot 4

    o -^o

    o o oo O - o

    oleBAR SCALE

    1965'200'

    Bottom AT5 of Hole Note: JVd 1330' DR/LUNG 1910 6 1. The Bottom of hole bears

    S46°27'20"W

    910

    WINDOW Brass Cop 00 876.53' from the Top of Hole.

    Brass cop

    LL LOCA7/0N:I CASILE DRAWH-2-9-17

    ELEV EX/SE GRADED GROUND = 5049' THIS IS TO CERT1FY THA WASPREPARED FROM FIELD RVEYSMADE BY ME OR UN O .THATTHE SAME ARE TRU RRECT T TH T OFMY KNOWLEDGE AN gl .No.189377

    T CY W.

    1910 1910

    REGI D NL

    Brass Cop Brass Cop Rebor

    589°57'59"W- 2644.21' (Meas.) SB959'46"W - 2644.46' (Meas.) TRI STATELANDSURVEYING& CONSULTINGN89°59'W

    - 80.06 (G.L.O.) 180 NORTH VERNALAVE. - VERNAL, UTAH 84078(435) 781-2501

    |CAS71E DRAWN-2-9-17 DATE SURVEYED

    = SECT10N CORNERS LOCATED (surfaceLocatiori) NAD 81 08-26-08 SURVEYED BY: T.H.LAT/TUDE = 40° OJ' 4253" DATE DRAWN:

    DRAWN BY: F.T.MBASlS OF ELEV; LONG/7UDE = 109° 58' 34.51" 09-11-08U.S.G.S. 7-1/2 min QUAD (PARIETTE DRAW SW) REVlSED: SCALE: 1" =

    T9S, RP7E, S.L.B.&M. Nimiza PRODorios coxPArrN89°58'E (G.L.O.) WELL LOCATION, CASTLE DRAW N-2-9-17,SB9 J7'48"E - 264Z78' (Meas.)

    LOCATED AS SHOWN IN THE SE 1/4 NWs','oss cap År'osscop 1 1/4 OF SECTION 2, T9S, R17E, S.L.B.&M.

    UINTAH COUNTY, UTAH.

    Lot 3 Lot 2 Lot 1Lot 4

    o -^o

    o o oo O - o

    oleBAR SCALE

    1965'200'

    Bottom AT5 of Hole Note: JVd 1330' DR/LUNG 1910 6 1. The Bottom of hole bears

    S46°27'20"W

    910

    WINDOW Brass Cop 00 876.53' from the Top of Hole.

    Brass cop

    LL LOCA7/0N:I CASILE DRAWH-2-9-17

    ELEV EX/SE GRADED GROUND = 5049' THIS IS TO CERT1FY THA WASPREPARED FROM FIELD RVEYSMADE BY ME OR UN O .THATTHE SAME ARE TRU RRECT T TH T OFMY KNOWLEDGE AN gl .No.189377

    T CY W.

    1910 1910

    REGI D NL

    Brass Cop Brass Cop Rebor

    589°57'59"W- 2644.21' (Meas.) SB959'46"W - 2644.46' (Meas.) TRI STATELANDSURVEYING& CONSULTINGN89°59'W

    - 80.06 (G.L.O.) 180 NORTH VERNALAVE. - VERNAL, UTAH 84078(435) 781-2501

    |CAS71E DRAWN-2-9-17 DATE SURVEYED

    = SECT10N CORNERS LOCATED (surfaceLocatiori) NAD 81 08-26-08 SURVEYED BY: T.H.LAT/TUDE = 40° OJ' 4253" DATE DRAWN:

    DRAWN BY: F.T.MBASlS OF ELEV; LONG/7UDE = 109° 58' 34.51" 09-11-08U.S.G.S. 7-1/2 min QUAD (PARIETTE DRAW SW) REVlSED: SCALE: 1" =

    T9S, RP7E, S.L.B.&M. Nimiza PRODorios coxPArrN89°58'E (G.L.O.) WELL LOCATION, CASTLE DRAW N-2-9-17,SB9 J7'48"E - 264Z78' (Meas.)

    LOCATED AS SHOWN IN THE SE 1/4 NWs','oss cap År'osscop 1 1/4 OF SECTION 2, T9S, R17E, S.L.B.&M.

    UINTAH COUNTY, UTAH.

    Lot 3 Lot 2 Lot 1Lot 4

    o -^o

    o o oo O - o

    oleBAR SCALE

    1965'200'

    Bottom AT5 of Hole Note: JVd 1330' DR/LUNG 1910 6 1. The Bottom of hole bears

    S46°27'20"W

    910

    WINDOW Brass Cop 00 876.53' from the Top of Hole.

    Brass cop

    LL LOCA7/0N:I CASILE DRAWH-2-9-17

    ELEV EX/SE GRADED GROUND = 5049' THIS IS TO CERT1FY THA WASPREPARED FROM FIELD RVEYSMADE BY ME OR UN O .THATTHE SAME ARE TRU RRECT T TH T OFMY KNOWLEDGE AN gl .No.189377

    T CY W.

    1910 1910

    REGI D NL

    Brass Cop Brass Cop Rebor

    589°57'59"W- 2644.21' (Meas.) SB959'46"W - 2644.46' (Meas.) TRI STATELANDSURVEYING& CONSULTINGN89°59'W

    - 80.06 (G.L.O.) 180 NORTH VERNALAVE. - VERNAL, UTAH 84078(435) 781-2501

    |CAS71E DRAWN-2-9-17 DATE SURVEYED

    = SECT10N CORNERS LOCATED (surfaceLocatiori) NAD 81 08-26-08 SURVEYED BY: T.H.LAT/TUDE = 40° OJ' 4253" DATE DRAWN:

    DRAWN BY: F.T.MBASlS OF ELEV; LONG/7UDE = 109° 58' 34.51" 09-11-08U.S.G.S. 7-1/2 min QUAD (PARIETTE DRAW SW) REVlSED: SCALE: 1" =

    T9S, RP7E, S.L.B.&M. Nimiza PRODorios coxPArrN89°58'E (G.L.O.) WELL LOCATION, CASTLE DRAW N-2-9-17,SB9 J7'48"E - 264Z78' (Meas.)

    LOCATED AS SHOWN IN THE SE 1/4 NWs','oss cap År'osscop 1 1/4 OF SECTION 2, T9S, R17E, S.L.B.&M.

    UINTAH COUNTY, UTAH.

    Lot 3 Lot 2 Lot 1Lot 4

    o -^o

    o o oo O - o

    oleBAR SCALE

    1965'200'

    Bottom AT5 of Hole Note: JVd 1330' DR/LUNG 1910 6 1. The Bottom of hole bears

    S46°27'20"W

    910

    WINDOW Brass Cop 00 876.53' from the Top of Hole.

    Brass cop

    LL LOCA7/0N:I CASILE DRAWH-2-9-17

    ELEV EX/SE GRADED GROUND = 5049' THIS IS TO CERT1FY THA WASPREPARED FROM FIELD RVEYSMADE BY ME OR UN O .THATTHE SAME ARE TRU RRECT T TH T OFMY KNOWLEDGE AN gl .No.189377

    T CY W.

    1910 1910

    REGI D NL

    Brass Cop Brass Cop Rebor

    589°57'59"W- 2644.21' (Meas.) SB959'46"W - 2644.46' (Meas.) TRI STATELANDSURVEYING& CONSULTINGN89°59'W

    - 80.06 (G.L.O.) 180 NORTH VERNALAVE. - VERNAL, UTAH 84078(435) 781-2501

    |CAS71E DRAWN-2-9-17 DATE SURVEYED

    = SECT10N CORNERS LOCATED (surfaceLocatiori) NAD 81 08-26-08 SURVEYED BY: T.H.LAT/TUDE = 40° OJ' 4253" DATE DRAWN:

    DRAWN BY: F.T.MBASlS OF ELEV; LONG/7UDE = 109° 58' 34.51" 09-11-08U.S.G.S. 7-1/2 min QUAD (PARIETTE DRAW SW) REVlSED: SCALE: 1" =

  • NEWFIELD PRODUCTION COMPANYCASTLE DRAW $TATE N-229-17

    SE/NW SECTION 2, T9S, R17EUINTAH COUNTY, UTAH

    TEN POINT DRILLING PRÓGRAM

    1. GEOLOGIC SURFACE FORMATION:

    Uinta formation of Upper Eocener Age

    2. ESTIMATED TOPS OF IMPORTANT GEOLOGIC MARKERSi

    Uinta 0 -- 1381'GreenRiver 1381'Wasatch 6055'

    3. ESTIMATED DEPTHS OF ANTICIPATED WÀTER, OIL, GAS OR MINERALS:

    Green Rivei Formation 1381' 6055' -Oil

    Fresh water may be encountered in the Uinta Formation, but would not be expected below about350'. All water shows and water bearing geologic units shall be reported to the geologic andengineering staff of the Vernal Office prior to running the next string of casing or before plug;gingorders are requested. All water shows must be reported within one (1) business day after beingencountered.

    All usable (

  • Ten Point Well ProgramThirteen Point Well ProgramPage 2 of 8

    An 8" Double Ram Hydraulic unit with a closing unit will be utilized. Function test of BOP's willbe check daily.

    Refer to Exhibit C for a diagram of BOP equipment that will be used on this well.

    6. TYPE AND CHARACTERISTICS OF THE PROPOSED CIRCULATION MUDS:

    From surface to ±350 feet will be drilled with an air/mist system. From about 350 feet to TD, afresh water system will be utilized. Clay inhibition and hole stability will be achieved with a KCIsubstitute additive. This additive will be identified in the APD and reviewed to determine if thereserve pit shall be lined. This fresh water system will typically contain Total Dissolved Solids(TDS) of less than 3000 PPM. Anticipated mud weight is 8.4 lbs/gal. If necessary to controlformation fluids or pressure, the system will be weighted with the addition of bentonite gel, and ifpressure conditions warrant, with barite.

    No chromate additives will be used in the mud system on Federal and/or Indian lands withoutprior BLM approval to ensure adequate protection of fresh aquifers.

    No chemicals subject to reporting under SARA Title III in an amount equal to or greater than10,000 pounds will be used, produced, stored, transported, or disposed of annually in associationwith the drilling, testing, or completing of this well. Furthermore, no extremely hazardoussubstances, as defined in 40 CFR 355, in threshold planning quantities, will be used, produced,stored, transported, or disposed of in association with the drilling, testing, or completing of thiswell.

    Hazardous substances specifically listed by the EPA as a hazardous waste or demonstrating acharacteristic of a hazardous waste will not be used in drilling, testing, or completion operations.

    Newfield Production will visually monitor pit levels and flow from the well during drillingoperations.

    7. AUXILIARY SAFETY EQUIPMENT TO BE USED:

    Auxiliary safety equipment will be a Kelly Cock, bit float, and a TIW valve with drill pipethreads.

    8. TESTING, LOGGING AND CORING PROGRAMS:

    The logging program will consist of a Dual Induction, Gamma Ray and Caliper log from TD tobase of surface casing @290' +/-, and a Compensated Neutron-Formation Density Log from TDto 3500' +-. A cement bond log will be run from PBTD to cement top. No drill stem testing orcoring is planned for this well.

    9. ANTICIPATED ABNORMAL PRESSURE OR TEMPERATURE:

    No abnormal temperatures or pressures are anticipated. No hydrogen sulfide has been encounteredor is known to exist from previous drilling in the area at this depth. Maximum anticipatedbottomhole pressure will approximately equal total depth in feet multiplied by a 0.433 psi/footgradient.

    10. ANTICIPATED STARTING DATE AND DURATION OF THE OPERATIONS:

    It is anticipated that the drilling operations will commence the first quarter of 2009, and takeapproximately seven (7) days from spud to rig

    Ten Point Well ProgramThirteen Point Well ProgramPage 2 of 8

    An 8" Double Ram Hydraulic unit with a closing unit will be utilized. Function test of BOP's willbe check daily.

    Refer to Exhibit C for a diagram of BOP equipment that will be used on this well.

    6. TYPE AND CHARACTERISTICS OF THE PROPOSED CIRCULATION MUDS:

    From surface to ±350 feet will be drilled with an air/mist system. From about 350 feet to TD, afresh water system will be utilized. Clay inhibition and hole stability will be achieved with a KCIsubstitute additive. This additive will be identified in the APD and reviewed to determine if thereserve pit shall be lined. This fresh water system will typically contain Total Dissolved Solids(TDS) of less than 3000 PPM. Anticipated mud weight is 8.4 lbs/gal. If necessary to controlformation fluids or pressure, the system will be weighted with the addition of bentonite gel, and ifpressure conditions warrant, with barite.

    No chromate additives will be used in the mud system on Federal and/or Indian lands withoutprior BLM approval to ensure adequate protection of fresh aquifers.

    No chemicals subject to reporting under SARA Title III in an amount equal to or greater than10,000 pounds will be used, produced, stored, transported, or disposed of annually in associationwith the drilling, testing, or completing of this well. Furthermore, no extremely hazardoussubstances, as defined in 40 CFR 355, in threshold planning quantities, will be used, produced,stored, transported, or disposed of in association with the drilling, testing, or completing of thiswell.

    Hazardous substances specifically listed by the EPA as a hazardous waste or demonstrating acharacteristic of a hazardous waste will not be used in drilling, testing, or completion operations.

    Newfield Production will visually monitor pit levels and flow from the well during drillingoperations.

    7. AUXILIARY SAFETY EQUIPMENT TO BE USED:

    Auxiliary safety equipment will be a Kelly Cock, bit float, and a TIW valve with drill pipethreads.

    8. TESTING, LOGGING AND CORING PROGRAMS:

    The logging program will consist of a Dual Induction, Gamma Ray and Caliper log from TD tobase of surface casing @290' +/-, and a Compensated Neutron-Formation Density Log from TDto 3500' +-. A cement bond log will be run from PBTD to cement top. No drill stem testing orcoring is planned for this well.

    9. ANTICIPATED ABNORMAL PRESSURE OR TEMPERATURE:

    No abnormal temperatures or pressures are anticipated. No hydrogen sulfide has been encounteredor is known to exist from previous drilling in the area at this depth. Maximum anticipatedbottomhole pressure will approximately equal total depth in feet multiplied by a 0.433 psi/footgradient.

    10. ANTICIPATED STARTING DATE AND DURATION OF THE OPERATIONS:

    It is anticipated that the drilling operations will commence the first quarter of 2009, and takeapproximately seven (7) days from spud to rig

    Ten Point Well ProgramThirteen Point Well ProgramPage 2 of 8

    An 8" Double Ram Hydraulic unit with a closing unit will be utilized. Function test of BOP's willbe check daily.

    Refer to Exhibit C for a diagram of BOP equipment that will be used on this well.

    6. TYPE AND CHARACTERISTICS OF THE PROPOSED CIRCULATION MUDS:

    From surface to ±350 feet will be drilled with an air/mist system. From about 350 feet to TD, afresh water system will be utilized. Clay inhibition and hole stability will be achieved with a KCIsubstitute additive. This additive will be identified in the APD and reviewed to determine if thereserve pit shall be lined. This fresh water system will typically contain Total Dissolved Solids(TDS) of less than 3000 PPM. Anticipated mud weight is 8.4 lbs/gal. If necessary to controlformation fluids or pressure, the system will be weighted with the addition of bentonite gel, and ifpressure conditions warrant, with barite.

    No chromate additives will be used in the mud system on Federal and/or Indian lands withoutprior BLM approval to ensure adequate protection of fresh aquifers.

    No chemicals subject to reporting under SARA Title III in an amount equal to or greater than10,000 pounds will be used, produced, stored, transported, or disposed of annually in associationwith the drilling, testing, or completing of this well. Furthermore, no extremely hazardoussubstances, as defined in 40 CFR 355, in threshold planning quantities, will be used, produced,stored, transported, or disposed of in association with the drilling, testing, or completing of thiswell.

    Hazardous substances specifically listed by the EPA as a hazardous waste or demonstrating acharacteristic of a hazardous waste will not be used in drilling, testing, or completion operations.

    Newfield Production will visually monitor pit levels and flow from the well during drillingoperations.

    7. AUXILIARY SAFETY EQUIPMENT TO BE USED:

    Auxiliary safety equipment will be a Kelly Cock, bit float, and a TIW valve with drill pipethreads.

    8. TESTING, LOGGING AND CORING PROGRAMS:

    The logging program will consist of a Dual Induction, Gamma Ray and Caliper log from TD tobase of surface casing @290' +/-, and a Compensated Neutron-Formation Density Log from TDto 3500' +-. A cement bond log will be run from PBTD to cement top. No drill stem testing orcoring is planned for this well.

    9. ANTICIPATED ABNORMAL PRESSURE OR TEMPERATURE:

    No abnormal temperatures or pressures are anticipated. No hydrogen sulfide has been encounteredor is known to exist from previous drilling in the area at this depth. Maximum anticipatedbottomhole pressure will approximately equal total depth in feet multiplied by a 0.433 psi/footgradient.

    10. ANTICIPATED STARTING DATE AND DURATION OF THE OPERATIONS:

    It is anticipated that the drilling operations will commence the first quarter of 2009, and takeapproximately seven (7) days from spud to rig

    Ten Point Well ProgramThirteen Point Well ProgramPage 2 of 8

    An 8" Double Ram Hydraulic unit with a closing unit will be utilized. Function test of BOP's willbe check daily.

    Refer to Exhibit C for a diagram of BOP equipment that will be used on this well.

    6. TYPE AND CHARACTERISTICS OF THE PROPOSED CIRCULATION MUDS:

    From surface to ±350 feet will be drilled with an air/mist system. From about 350 feet to TD, afresh water system will be utilized. Clay inhibition and hole stability will be achieved with a KCIsubstitute additive. This additive will be identified in the APD and reviewed to determine if thereserve pit shall be lined. This fresh water system will typically contain Total Dissolved Solids(TDS) of less than 3000 PPM. Anticipated mud weight is 8.4 lbs/gal. If necessary to controlformation fluids or pressure, the system will be weighted with the addition of bentonite gel, and ifpressure conditions warrant, with barite.

    No chromate additives will be used in the mud system on Federal and/or Indian lands withoutprior BLM approval to ensure adequate protection of fresh aquifers.

    No chemicals subject to reporting under SARA Title III in an amount equal to or greater than10,000 pounds will be used, produced, stored, transported, or disposed of annually in associationwith the drilling, testing, or completing of this well. Furthermore, no extremely hazardoussubstances, as defined in 40 CFR 355, in threshold planning quantities, will be used, produced,stored, transported, or disposed of in association with the drilling, testing, or completing of thiswell.

    Hazardous substances specifically listed by the EPA as a hazardous waste or demonstrating acharacteristic of a hazardous waste will not be used in drilling, testing, or completion operations.

    Newfield Production will visually monitor pit levels and flow from the well during drillingoperations.

    7. AUXILIARY SAFETY EQUIPMENT TO BE USED:

    Auxiliary safety equipment will be a Kelly Cock, bit float, and a TIW valve with drill pipethreads.

    8. TESTING, LOGGING AND CORING PROGRAMS:

    The logging program will consist of a Dual Induction, Gamma Ray and Caliper log from TD tobase of surface casing @290' +/-, and a Compensated Neutron-Formation Density Log from TDto 3500' +-. A cement bond log will be run from PBTD to cement top. No drill stem testing orcoring is planned for this well.

    9. ANTICIPATED ABNORMAL PRESSURE OR TEMPERATURE:

    No abnormal temperatures or pressures are anticipated. No hydrogen sulfide has been encounteredor is known to exist from previous drilling in the area at this depth. Maximum anticipatedbottomhole pressure will approximately equal total depth in feet multiplied by a 0.433 psi/footgradient.

    10. ANTICIPATED STARTING DATE AND DURATION OF THE OPERATIONS:

    It is anticipated that the drilling operations will commence the first quarter of 2009, and takeapproximately seven (7) days from spud to rig

  • Ten Point Well ProgramThirteen Point Well ProgramPage 4 of 8

    NEWFIELD PRODUCTION COMPANYCASTLE DRAW STATE N-2-9-17

    SE/NW SECTION 2, T9S, R17EUINTAH COUNTY, UTAH

    THIRTEEN POINT SURFACE PROGRAM

    l. EXISTING ROADS

    See attached Topographic Map "A"

    To reach Newfield Production Company well location site Castle Draw State N-2-9-17 located inthe SE ¼ NW ¼ Section 2, T9S, Rl7E, S.L.B. & M,, Uintah County, Utah:

    Proceed southwesterly out of Myton, Utah along Highway 40 - 1.4 miles ± to the junctionof thishighway and UT State Hwy 53; proceed southeasterly - 11.6 miles ± to it's junctionwith anexisting road to the northeast; proceed northeasterly - 1.4 miles ± to it's junctionwith an existingroad to the southeast; proceed southeasterly - 0.6 miles ± to it's junctionwith an existing road tothe northeast; proceed northeasterly - 0.2 miles ± to the beginning of the access road to theexisting Mon. State 22-2-9-17 well location.

    The highways mentioned in the foregoing paragraph are bituminous surfaced roads to the pointwhere Highway 216 exists to the South, thereafter the roads are constructed with existingmaterials and gravel. The highways are maintained by Utah State road crews. All other roads aremaintained by County crews.

    The aforementioned dirt oil field service roads and other roads in the vicinity are constructed outof existing native materials that are prevalent to the existing area they are located in and rangefrom clays to a sandy-clay shale material.

    The roads for access during the drilling, completion and production phase will be maintained atthe standards required by the State of Utah, or other controlling agencies. This maintenance willconsist of some minor grader work for smoothing road surfaces and for snow removal.

    2. PLANNED ACCESS ROAD

    The is no proposed access road for this location. The proposed well will be drilled off of theexisting Mon. State 22-2-9-17 well pad. See attached Topographic Map "B".

    There will be no new gates or cattle guards required.

    3. LOCATION OF EXISTING WELLS

    Refer to EXHIBIT B.

    4. LOCATION OF EXISTING AND/OR PROPOSED FACILITIES

    The proposed well will be drilled directionally off of the existing Mon. State 22-2-9-17 well pad.

    It is anticipated that this well will be a producing oil well.

    Upon construction of a tank battery, the well pad will be surrounded by a dike of sufficientcapacity to contain at minimum 110% of the largest tank volume within the facility

    Ten Point Well ProgramThirteen Point Well ProgramPage 4 of 8

    NEWFIELD PRODUCTION COMPANYCASTLE DRAW STATE N-2-9-17

    SE/NW SECTION 2, T9S, R17EUINTAH COUNTY, UTAH

    THIRTEEN POINT SURFACE PROGRAM

    l. EXISTING ROADS

    See attached Topographic Map "A"

    To reach Newfield Production Company well location site Castle Draw State N-2-9-17 located inthe SE ¼ NW ¼ Section 2, T9S, Rl7E, S.L.B. & M,, Uintah County, Utah:

    Proceed southwesterly out of Myton, Utah along Highway 40 - 1.4 miles ± to the junctionof thishighway and UT State Hwy 53; proceed southeasterly - 11.6 miles ± to it's junctionwith anexisting road to the northeast; proceed northeasterly - 1.4 miles ± to it's junctionwith an existingroad to the southeast; proceed southeasterly - 0.6 miles ± to it's junctionwith an existing road tothe northeast; proceed northeasterly - 0.2 miles ± to the beginning of the access road to theexisting Mon. State 22-2-9-17 well location.

    The highways mentioned in the foregoing paragraph are bituminous surfaced roads to the pointwhere Highway 216 exists to the South, thereafter the roads are constructed with existingmaterials and gravel. The highways are maintained by Utah State road crews. All other roads aremaintained by County crews.

    The aforementioned dirt oil field service roads and other roads in the vicinity are constructed outof existing native materials that are prevalent to the existing area they are located in and rangefrom clays to a sandy-clay shale material.

    The roads for access during the drilling, completion and production phase will be maintained atthe standards required by the State of Utah, or other controlling agencies. This maintenance willconsist of some minor grader work for smoothing road surfaces and for snow removal.

    2. PLANNED ACCESS ROAD

    The is no proposed access road for this location. The proposed well will be drilled off of theexisting Mon. State 22-2-9-17 well pad. See attached Topographic Map "B".

    There will be no new gates or cattle guards required.

    3. LOCATION OF EXISTING WELLS

    Refer to EXHIBIT B.

    4. LOCATION OF EXISTING AND/OR PROPOSED FACILITIES

    The proposed well will be drilled directionally off of the existing Mon. State 22-2-9-17 well pad.

    It is anticipated that this well will be a producing oil well.

    Upon construction of a tank battery, the well pad will be surrounded by a dike of sufficientcapacity to contain at minimum 110% of the largest tank volume within the facility

    Ten Point Well ProgramThirteen Point Well ProgramPage 4 of 8

    NEWFIELD PRODUCTION COMPANYCASTLE DRAW STATE N-2-9-17

    SE/NW SECTION 2, T9S, R17EUINTAH COUNTY, UTAH

    THIRTEEN POINT SURFACE PROGRAM

    l. EXISTING ROADS

    See attached Topographic Map "A"

    To reach Newfield Production Company well location site Castle Draw State N-2-9-17 located inthe SE ¼ NW ¼ Section 2, T9S, Rl7E, S.L.B. & M,, Uintah County, Utah:

    Proceed southwesterly out of Myton, Utah along Highway 40 - 1.4 miles ± to the junctionof thishighway and UT State Hwy 53; proceed southeasterly - 11.6 miles ± to it's junctionwith anexisting road to the northeast; proceed northeasterly - 1.4 miles ± to it's junctionwith an existingroad to the southeast; proceed southeasterly - 0.6 miles ± to it's junctionwith an existing road tothe northeast; proceed northeasterly - 0.2 miles ± to the beginning of the access road to theexisting Mon. State 22-2-9-17 well location.

    The highways mentioned in the foregoing paragraph are bituminous surfaced roads to the pointwhere Highway 216 exists to the South, thereafter the roads are constructed with existingmaterials and gravel. The highways are maintained by Utah State road crews. All other roads aremaintained by County crews.

    The aforementioned dirt oil field service roads and other roads in the vicinity are constructed outof existing native materials that are prevalent to the existing area they are located in and rangefrom clays to a sandy-clay shale material.

    The roads for access during the drilling, completion and production phase will be maintained atthe standards required by the State of Utah, or other controlling agencies. This maintenance willconsist of some minor grader work for smoothing road surfaces and for snow removal.

    2. PLANNED ACCESS ROAD

    The is no proposed access road for this location. The proposed well will be drilled off of theexisting Mon. State 22-2-9-17 well pad. See attached Topographic Map "B".

    There will be no new gates or cattle guards required.

    3. LOCATION OF EXISTING WELLS

    Refer to EXHIBIT B.

    4. LOCATION OF EXISTING AND/OR PROPOSED FACILITIES

    The proposed well will be drilled directionally off of the existing Mon. State 22-2-9-17 well pad.

    It is anticipated that this well will be a producing oil well.

    Upon construction of a tank battery, the well pad will be surrounded by a dike of sufficientcapacity to contain at minimum 110% of the largest tank volume within the facility

    Ten Point Well ProgramThirteen Point Well ProgramPage 4 of 8

    NEWFIELD PRODUCTION COMPANYCASTLE DRAW STATE N-2-9-17

    SE/NW SECTION 2, T9S, R17EUINTAH COUNTY, UTAH

    THIRTEEN POINT SURFACE PROGRAM

    l. EXISTING ROADS

    See attached Topographic Map "A"

    To reach Newfield Production Company well location site Castle Draw State N-2-9-17 located inthe SE ¼ NW ¼ Section 2, T9S, Rl7E, S.L.B. & M,, Uintah County, Utah:

    Proceed southwesterly out of Myton, Utah along Highway 40 - 1.4 miles ± to the junctionof thishighway and UT State Hwy 53; proceed southeasterly - 11.6 miles ± to it's junctionwith anexisting road to the northeast; proceed northeasterly - 1.4 miles ± to it's junctionwith an existingroad to the southeast; proceed southeasterly - 0.6 miles ± to it's junctionwith an existing road tothe northeast; proceed northeasterly - 0.2 miles ± to the beginning of the access road to theexisting Mon. State 22-2-9-17 well location.

    The highways mentioned in the foregoing paragraph are bituminous surfaced roads to the pointwhere Highway 216 exists to the South, thereafter the roads are constructed with existingmaterials and gravel. The highways are maintained by Utah State road crews. All other roads aremaintained by County crews.

    The aforementioned dirt oil field service roads and other roads in the vicinity are constructed outof existing native materials that are prevalent to the existing area they are located in and rangefrom clays to a sandy-clay shale material.

    The roads for access during the drilling, completion and production phase will be maintained atthe standards required by the State of Utah, or other controlling agencies. This maintenance willconsist of some minor grader work for smoothing road surfaces and for snow removal.

    2. PLANNED ACCESS ROAD

    The is no proposed access road for this location. The proposed well will be drilled off of theexisting Mon. State 22-2-9-17 well pad. See attached Topographic Map "B".

    There will be no new gates or cattle guards required.

    3. LOCATION OF EXISTING WELLS

    Refer to EXHIBIT B.

    4. LOCATION OF EXISTING AND/OR PROPOSED FACILITIES

    The proposed well will be drilled directionally off of the existing Mon. State 22-2-9-17 well pad.

    It is anticipated that this well will be a producing oil well.

    Upon construction of a tank battery, the well pad will be surrounded by a dike of sufficientcapacity to contain at minimum 110% of the largest tank volume within the facility

  • Ten Point Well ProgramThirteen Point Well ProgramPage 5 of 8

    Tank batteries will be built to State specifications.

    All permanent (on site for six (6) months or longer) structures, constructed or installed (includingpumping units), will be painted Desert Tan. All facilities will be painted within six months ofinstallation.

    5. LOCATION AND TYPE OF WATER SUPPLY

    Newfield Production will transport water by truck for drilling purposes from the following watersources:

    Johnson Water DistrictWater Right: 43-7478

    Neil Moon PondWater Right: 43-11787

    Maurice Harvey PondWater Right: 47-1358

    Newfield Collector WellWater Right: 41-3530 (A30414DV, contracted with the Duchesne County Conservancy District).

    There will be no water well drilled at this site.

    6. SOURCE OF CONSTRUCTION MATERIALS

    The proposed Castle Draw State N-2-9-17 will be drilled off of the existing Mon. State 22-2-9-17well pad. No additional surface disturbance will be required for this location.

    7. METHODS FOR HANDLING WASTE DISPOSAL

    A small reserve pit (90' x 40' x 8' deep, or less) will be constructed from native soil and claymaterials. The reserve pit will receive the processed drill cutting (wet sand, shale & rock)removed from the wellbore. Any drilling fluids, which do accumulate in the pit as a result ofshale-shaker carryover, cleaning of the sand trap, etc., will be promptly reclaimed. All drillingfluids will be fresh water based, typically containing Total Dissolved Solids of less than 3000PPM. No potassium chloride, chromates, trash, debris, nor any other substance deemed hazardouswill be placed in this pit. A 16 mil liner with felt will be required. Newfield requests approvalthat a flare pit be constructed and utilized on this location.

    A portable toilet wilÍbe provided for human waste.

    A trash basket will be provided for garbage (trash) and hauled away to an approved disposal site atthe completion of the drilling activities.

    Immediately upon first production, all produced water will be confined to a steel storage tank. Ifthe production water meets quality guidelines, it is transported to the Ashley, Monument Butte,Jonah, and Beluga water injection facilities by company or contract trucks. Subsequently, theproduced water is injected into approved Class II wells to enhance Newfield's secondary recoveryproject.

    Water not meeting quality criteria, is disposed at Newfield's Pariette #4 disposal well (Sec. 7, T9SRl9E) or at State of Utah approved surface disposal

    Ten Point Well ProgramThirteen Point Well ProgramPage 5 of 8

    Tank batteries will be built to State specifications.

    All permanent (on site for six (6) months or longer) structures, constructed or installed (includingpumping units), will be painted Desert Tan. All facilities will be painted within six months ofinstallation.

    5. LOCATION AND TYPE OF WATER SUPPLY

    Newfield Production will transport water by truck for drilling purposes from the following watersources:

    Johnson Water DistrictWater Right: 43-7478

    Neil Moon PondWater Right: 43-11787

    Maurice Harvey PondWater Right: 47-1358

    Newfield Collector WellWater Right: 41-3530 (A30414DV, contracted with the Duchesne County Conservancy District).

    There will be no water well drilled at this site.

    6. SOURCE OF CONSTRUCTION MATERIALS

    The proposed Castle Draw State N-2-9-17 will be drilled off of the existing Mon. State 22-2-9-17well pad. No additional surface disturbance will be required for this location.

    7. METHODS FOR HANDLING WASTE DISPOSAL

    A small reserve pit (90' x 40' x 8' deep, or less) will be constructed from native soil and claymaterials. The reserve pit will receive the processed drill cutting (wet sand, shale & rock)removed from the wellbore. Any drilling fluids, which do accumulate in the pit as a result ofshale-shaker carryover, cleaning of the sand trap, etc., will be promptly reclaimed. All drillingfluids will be fresh water based, typically containing Total Dissolved Solids of less than 3000PPM. No potassium chloride, chromates, trash, debris, nor any other substance deemed hazardouswill be placed in this pit. A 16 mil liner with felt will be required. Newfield requests approvalthat a flare pit be constructed and utilized on this location.

    A portable toilet wilÍbe provided for human waste.

    A trash basket will be provided for garbage (trash) and hauled away to an approved disposal site atthe completion of the drilling activities.

    Immediately upon first production, all produced water will be confined to a steel storage tank. Ifthe production water meets quality guidelines, it is transported to the Ashley, Monument Butte,Jonah, and Beluga water injection facilities by company or contract trucks. Subsequently, theproduced water is injected into approved Class II wells to enhance Newfield's secondary recoveryproject.

    Water not meeting quality criteria, is disposed at Newfield's Pariette #4 disposal well (Sec. 7, T9SRl9E) or at State of Utah approved surface disposal

    Ten Point Well ProgramThirteen Point Well ProgramPage 5 of 8

    Tank batteries will be built to State specifications.

    All permanent (on site for six (6) months or longer) structures, constructed or installed (includingpumping units), will be painted Desert Tan. All facilities will be painted within six months ofinstallation.

    5. LOCATION AND TYPE OF WATER SUPPLY

    Newfield Production will transport water by truck for drilling purposes from the following watersources:

    Johnson Water DistrictWater Right: 43-7478

    Neil Moon PondWater Right: 43-11787

    Maurice Harvey PondWater Right: 47-1358

    Newfield Collector WellWater Right: 41-3530 (A30414DV, contracted with the Duchesne County Conservancy District).

    There will be no water well drilled at this site.

    6. SOURCE OF CONSTRUCTION MATERIALS

    The proposed Castle Draw State N-2-9-17 will be drilled off of the existing Mon. State 22-2-9-17well pad. No additional surface disturbance will be required for this location.

    7. METHODS FOR HANDLING WASTE DISPOSAL

    A small reserve pit (90' x 40' x 8' deep, or less) will be constructed from native soil and claymaterials. The reserve pit will receive the processed drill cutting (wet sand, shale & rock)removed from the wellbore. Any drilling fluids, which do accumulate in the pit as a result ofshale-shaker carryover, cleaning of the sand trap, etc., will be promptly reclaimed. All drillingfluids will be fresh water based, typically containing Total Dissolved Solids of less than 3000PPM. No potassium chloride, chromates, trash, debris, nor any other substance deemed hazardouswill be placed in this pit. A 16 mil liner with felt will be required. Newfield requests approvalthat a flare pit be constructed and utilized on this location.

    A portable toilet wilÍbe provided for human waste.

    A trash basket will be provided for garbage (trash) and hauled away to an approved disposal site atthe completion of the drilling activities.

    Immediately upon first production, all produced water will be confined to a steel storage tank. Ifthe production water meets quality guidelines, it is transported to the Ashley, Monument Butte,Jonah, and Beluga water injection facilities by company or contract trucks. Subsequently, theproduced water is injected into approved Class II wells to enhance Newfield's secondary recoveryproject.

    Water not meeting quality criteria, is disposed at Newfield's Pariette #4 disposal well (Sec. 7, T9SRl9E) or at State of Utah approved surface disposal

    Ten Point Well ProgramThirteen Point Well ProgramPage 5 of 8

    Tank batteries will be built to State specifications.

    All permanent (on site for six (6) months or longer) structures, constructed or installed (includingpumping units), will be painted Desert Tan. All facilities will be painted within six months ofinstallation.

    5. LOCATION AND TYPE OF WATER SUPPLY

    Newfield Production will transport water by truck for drilling purposes from the following watersources:

    Johnson Water DistrictWater Right: 43-7478

    Neil Moon PondWater Right: 43-11787

    Maurice Harvey PondWater Right: 47-1358

    Newfield Collector WellWater Right: 41-3530 (A30414DV, contracted with the Duchesne County Conservancy District).

    There will be no water well drilled at this site.

    6. SOURCE OF CONSTRUCTION MATERIALS

    The proposed Castle Draw State N-2-9-17 will be drilled off of the existing Mon. State 22-2-9-17well pad. No additional surface disturbance will be required for this location.

    7. METHODS FOR HANDLING WASTE DISPOSAL

    A small reserve pit (90' x 40' x 8' deep, or less) will be constructed from native soil and claymaterials. The reserve pit will receive the processed drill cutting (wet sand, shale & rock)removed from the wellbore. Any drilling fluids, which do accumulate in the pit as a result ofshale-shaker carryover, cleaning of the sand trap, etc., will be promptly reclaimed. All drillingfluids will be fresh water based, typically containing Total Dissolved Solids of less than 3000PPM. No potassium chloride, chromates, trash, debris, nor any other substance deemed hazardouswill be placed in this pit. A 16 mil liner with felt will be required. Newfield requests approvalthat a flare pit be constructed and utilized on this location.

    A portable toilet wilÍbe provided for human waste.

    A trash basket will be provided for garbage (trash) and hauled away to an approved disposal site atthe completion of the drilling activities.

    Immediately upon first production, all produced water will be confined to a steel storage tank. Ifthe production water meets quality guidelines, it is transported to the Ashley, Monument Butte,Jonah, and Beluga water injection facilities by company or contract trucks. Subsequently, theproduced water is injected into approved Class II wells to enhance Newfield's secondary recoveryproject.

    Water not meeting quality criteria, is disposed at Newfield's Pariette #4 disposal well (Sec. 7, T9SRl9E) or at State of Utah approved surface disposal

  • Ten Point Well ProgramThirteen Point Well ProgramPage 6 of 8

    8. ANCILLARY FACILITIES:

    There are no ancillary facilities planned for at the present time and none foreseen in the nearfuture.

    9. WELL SITE LAYOUT:

    See attached Location Layout Sheet.

    Fencing Requirements

    All pits will be fenced according to the following minimum standards:

    a) A 39-inch net wire shall be used with at least one strand of barbed wire on top of the net.

    b) The net wire shall be no more than two (2) inches above the ground. The barbed wireshall be three (3) inches above the net wire. Total height of the fence shall be at leastforty-two (42) inches.

    c) Corner posts shall be centered and/or braced in such a manner to keep tight at all times

    d) Standard steel, wood or pipe posts shall be used between the corner braces. Maximumdistance between any two posts shall be no greater than sixteen (16) feet.

    e) All wire shall be stretched, by using a stretching device, before it is attached to the cornerposts.

    The reserve pit fencing will be on three (3) sides during drilling operations and on thefourth side when the rig moves off location. Pits will be fenced and maintained untilcleanup.

    10. PLANS FOR RESTORATION OF SURFACE:

    a) Producing Location

    Immediately upon well completion, the location and surrounding area will be cleared ofall unused tubing, equipment, debris, material, trash and junk not required for production.

    The reserve pit and that portion of the location not needed for productionfacilities/operations will be recontoured to the approximated natural contours. Weatherpermitting, the reserve pit will be reclaimed within one hundred twenty (120) days fromthe date of well completion. Before any dirt work takes place, the reserve pit must haveall fluids and hydrocarbons removed.

    b) Dry Hole Abandoned Location

    At such time as the well is plugged and abandoned, the operator shall submit asubsequent report of abandonment and the State of Utah will attach the appropriatesurface rehabilitation conditions of approval.

    11. SURFACE OWNERSHIP: State of Utah

    12. OTHER ADDITIONAL

    Ten Point Well ProgramThirteen Point Well ProgramPage 6 of 8

    8. ANCILLARY FACILITIES:

    There are no ancillary facilities planned for at the present time and none foreseen in the nearfuture.

    9. WELL SITE LAYOUT:

    See attached Location Layout Sheet.

    Fencing Requirements

    All pits will be fenced according to the following minimum standards:

    a) A 39-inch net wire shall be used with at least one strand of barbed wire on top of the net.

    b) The net wire shall be no more than two (2) inches above the ground. The barbed wireshall be three (3) inches above the net wire. Total height of the fence shall be at leastforty-two (42) inches.

    c) Corner posts shall be centered and/or braced in such a manner to keep tight at all times

    d) Standard steel, wood or pipe posts shall be used between the corner braces. Maximumdistance between any two posts shall be no greater than sixteen (16) feet.

    e) All wire shall be stretched, by using a stretching device, before it is attached to the cornerposts.

    The reserve pit fencing will be on three (3) sides during drilling operations and on thefourth side when the rig moves off location. Pits will be fenced and maintained untilcleanup.

    10. PLANS FOR RESTORATION OF SURFACE:

    a) Producing Location

    Immediately upon well completion, the location and surrounding area will be cleared ofall unused tubing, equipment, debris, material, trash and junk not required for production.

    The reserve pit and that portion of the location not needed for productionfacilities/operations will be recontoured to the approximated natural contours. Weatherpermitting, the reserve pit will be reclaimed within one hundred twenty (120) days fromthe date of well completion. Before any dirt work takes place, the reserve pit must haveall fluids and hydrocarbons removed.

    b) Dry Hole Abandoned Location

    At such time as the well is plugged and abandoned, the operator shall submit asubsequent report of abandonment and the State of Utah will attach the appropriatesurface rehabilitation conditions of approval.

    11. SURFACE OWNERSHIP: State of Utah

    12. OTHER ADDITIONAL

    Ten Point Well ProgramThirteen Point Well ProgramPage 6 of 8

    8. ANCILLARY FACILITIES:

    There are no ancillary facilities planned for at the present time and none foreseen in the nearfuture.

    9. WELL SITE LAYOUT:

    See attached Location Layout Sheet.

    Fencing Requirements

    All pits will be fenced according to the following minimum standards:

    a) A 39-inch net wire shall be used with at least one strand of barbed wire on top of the net.

    b) The net wire shall be no more than two (2) inches above the ground. The barbed wireshall be three (3) inches above the net wire. Total height of the fence shall be at leastforty-two (42) inches.

    c) Corner posts shall be centered and/or braced in such a manner to keep tight at all times

    d) Standard steel, wood or pipe posts shall be used between the corner braces. Maximumdistance between any two posts shall be no greater than sixteen (16) feet.

    e) All wire shall be stretched, by using a stretching device, before it is attached to the cornerposts.

    The reserve pit fencing will be on three (3) sides during drilling operations and on thefourth side when the rig moves off location. Pits will be fenced and maintained untilcleanup.

    10. PLANS FOR RESTORATION OF SURFACE:

    a) Producing Location

    Immediately upon well completion, the location and surrounding area will be cleared ofall unused tubing, equipment, debris, material, trash and junk not required for production.

    The reserve pit and that portion of the location not needed for productionfacilities/operations will be recontoured to the approximated natural contours. Weatherpermitting, the reserve pit will be reclaimed within one hundred twenty (120) days fromthe date of well completion. Before any dirt work takes place, the reserve pit must haveall fluids and hydrocarbons removed.

    b) Dry Hole Abandoned Location

    At such time as the well is plugged and abandoned, the operator shall submit asubsequent report of abandonment and the State of Utah will attach the appropriatesurface rehabilitation conditions of approval.

    11. SURFACE OWNERSHIP: State of Utah

    12. OTHER ADDITIONAL

    Ten Point Well ProgramThirteen Point Well ProgramPage 6 of 8

    8. ANCILLARY FACILITIES:

    There are no ancillary facilities planned for at the present time and none foreseen in the nearfuture.

    9. WELL SITE LAYOUT:

    See attached Location Layout Sheet.

    Fencing Requirements

    All pits will be fenced according to the following minimum standards:

    a) A 39-inch net wire shall be used with at least one strand of barbed wire on top of the net.

    b) The net wire shall be no more than two (2) inches above the ground. The barbed wireshall be three (3) inches above the net wire. Total height of the fence shall be at leastforty-two (42) inches.

    c) Corner posts shall be centered and/or braced in such a manner to keep tight at all times

    d) Standard steel, wood or pipe posts shall be used between the corner braces. Maximumdistance between any two posts shall be no greater than sixteen (16) feet.

    e) All wire shall be stretched, by using a stretching device, before it is attached to the cornerposts.

    The reserve pit fencing will be on three (3) sides during drilling operations and on thefourth side when the rig moves off location. Pits will be fenced and maintained untilcleanup.

    10. PLANS FOR RESTORATION OF SURFACE:

    a) Producing Location

    Immediately upon well completion, the location and surrounding area will be cleared ofall unused tubing, equipment, debris, material, trash and junk not required for production.

    The reserve pit and that portion of the location not needed for productionfacilities/operations will be recontoured to the approximated natural contours. Weatherpermitting, the reserve pit will be reclaimed within one hundred twenty (120) days fromthe date of well completion. Before any dirt work takes place, the reserve pit must haveall fluids and hydrocarbons removed.

    b) Dry Hole Abandoned Location

    At such time as the well is plugged and abandoned, the operator shall submit asubsequent report of abandonment and the State of Utah will attach the appropriatesurface rehabilitation conditions of approval.

    11. SURFACE OWNERSHIP: State of Utah

    12. OTHER ADDITIONAL

  • Ten Point Well ProgramThirteen Point Well ProgramPage 7 of 8

    a) Newfield Production Company is responsible for informing all persons in the area whoare associated with this project that they will be subject to prosecution for knowinglydisturbing historic or archaeological sites, or for collecting artifacts. If historic orarchaeological materials are uncovered during construction, Newfield is to immediatelystop work that might further disturb such materials and contact the Authorized Officer.

    b) Newfield Production will control noxious weeds along rights-of-way for roads, pipelines,well sites or other applicable facilities. On State administered land it is required that aPesticide Use Proposal shall be submitted and given approval prior to the application ofherbicides or other possible hazardous chemicals.

    c) Drilling rigs and/or equipment used during drilling operations on this well site will not bestacked or stored on State Lands after the conclusion of drilling operations or at any othertime without State authorization. However, if State authorization is obtained, it is only atemporary measure to allow time to make arrangements for permanent storage oncommercial facilities.

    Additional Surface Stipulations

    All lease and/or unit operations will be conducted in such a manner that full compliance is madewith all applicable laws and regulations, Onshore Oil and Gas Orders, the approved plan ofoperations and any applicable Notice to Lessees. A copy of these conditions will be furnished tothe field representative to ensure compliance.

    Hazardous Material Declaration

    Newfield Production Company guarantees that during the drilling and completion of the CastleDraw State N-2-9-17, Newfield will not use, produce, store, transport or dispose 10,000# annuallyof any of the hazardous chemicals contained in the Environmental Protection Agency'sconsolidated list of chemicals subject to reporting under Title III Superfund Amendments andReauthorization Act (SARA) of 1986. Newfield also guarantees that during the drilling andcompletion of the Castle Draw State N-2-9-17 Newfield will use, produce, store, transport ordispose less than the threshold planning quantity (T.P.Q.)of any extremely hazardous substancesas defined in 40 CFR 355.

    A complete copy of the approved APD, if applicable, shall be on location during the constructionof the location and drilling activities.

    Newfield Production Company or a contractor employed by Newfield Production shall contact theState office at (801) 722-3417, 48 hours prior to construction activities.

    The State office shall be notified upon site completion prior to moving on the drilling rig.

    13. LESSEE'S OR OPERATOR'S REPRENSENTATIVE AND CERTIFICATION:

    Representative

    Name: Dave AllredAddress: Newfield Production Company

    Route 3, Box 3630Myton, UT 84052

    Telephone: (435) 646-3721

    Ten Point Well ProgramThirteen Point Well ProgramPage 7 of 8

    a) Newfield Production Company is responsible for informing all persons in the area whoare associated with this project that they will be subject to prosecution for knowinglydisturbing historic or archaeological sites, or for collecting artifacts. If historic orarchaeological materials are uncovered during construction, Newfield is to immediatelystop work that might further disturb such materials and contact the Authorized Officer.

    b) Newfield Production will control noxious weeds along rights-of-way for roads, pipelines,well sites or other applicable facilities. On State administered land it is required that aPesticide Use Proposal shall be submitted and given approval prior to the application ofherbicides or other possible hazardous chemicals.

    c) Drilling rigs and/or equipment used during drilling operations on this well site will not bestacked or stored on State Lands after the conclusion of drilling operations or at any othertime without State authorization. However, if State authorization is obtained, it is only atemporary measure to allow time to make arrangements for permanent storage oncommercial facilities.

    Additional Surface Stipulations

    All lease and/or unit operations will be conducted in such a manner that full compliance is madewith all applicable laws and regulations, Onshore Oil and Gas Orders, the approved plan ofoperations and any applicable Notice to Lessees. A copy of these conditions will be furnished tothe field representative to ensure compliance.

    Hazardous Material Declaration

    Newfield Production Company guarantees that during the drilling and completion of the CastleDraw State N-2-9-17, Newfield will not use, produce, store, transport or dispose 10,000# annuallyof any of the hazardous chemicals contained in the Environmental Protection Agency'sconsolidated list of chemicals subject to reporting under Title III Superfund Amendments andReauthorization Act (SARA) of 1986. Newfield also guarantees that during the drilling andcompletion of the Castle Draw State N-2-9-17 Newfield will use, produce, store, transport ordispose less than the threshold planning quantity (T.P.Q.)of any extremely hazardous substancesas defined in 40 CFR 355.

    A complete copy of the approved APD, if applicable, shall be on location during the constructionof the location and drilling activities.

    Newfield Production Company or a contractor employed by Newfield Production shall contact theState office at (801) 722-3417, 48 hours prior to construction activities.

    The State office shall be notified upon site completion prior to moving on the drilling rig.

    13. LESSEE'S OR OPERATOR'S REPRENSENTATIVE AND CERTIFICATION:

    Representative

    Name: Dave AllredAddress: Newfield Production Company

    Route 3, Box 3630Myton, UT 84052

    Telephone: (435) 646-3721

    Ten Point Well ProgramThirteen Point Well ProgramPage 7 of 8

    a) Newfield Production Company is responsible for informing all persons in the area whoare associated with this project that they will be subject to prosecution for knowinglydisturbing historic or archaeological sites, or for collecting artifacts. If historic orarchaeological materials are uncovered during construction, Newfield is to immediatelystop work that might further disturb such materials and contact the Authorized Officer.

    b) Newfield Production will control noxious weeds along rights-of-way for roads, pipelines,well sites or other applicable facilities. On State administered land it is required that aPesticide Use Proposal shall be submitted and given approval prior to the application ofherbicides or other possible hazardous chemicals.

    c) Drilling rigs and/or equipment used during drilling operations on this well site will not bestacked or stored on State Lands after the conclusion of drilling operations or at any othertime without State authorization. However, if State authorization is obtained, it is only atemporary measure to allow time to make arrangements for permanent storage oncommercial facilities.

    Additional Surface Stipulations

    All lease and/or unit operations will be conducted in such a manner that full compliance is madewith all applicable laws and regulations, Onshore Oil and Gas Orders, the approved plan ofoperations and any applicable Notice to Lessees. A copy of these conditions will be furnished tothe field representative to ensure compliance.

    Hazardous Material Declaration

    Newfield Production Company guarantees that during the drilling and completion of the CastleDraw State N-2-9-17, Newfield will not use, produce, store, transport or dispose 10,000# annuallyof any of the hazardous chemicals contained in the Environmental Protection Agency'sconsolidated list of chemicals subject to reporting under Title III Superfund Amendments andReauthorization Act (SARA) of 1986. Newfield also guarantees that during the drilling andcompletion of the Castle Draw State N-2-9-17 Newfield will use, produce, store, transport ordispose less than the threshold planning quantity (T.P.Q.)of any extremely hazardous substancesas defined in 40 CFR 355.

    A complete copy of the approved APD, if applicable, shall be on location during the constructionof the location and drilling activities.

    Newfield Production Company or a contractor employed by Newfield Production shall contact theState office at (801) 722-3417, 48 hours prior to construction activities.

    The State office shall be notified upon site completion prior to moving on the drilling rig.

    13. LESSEE'S OR OPERATOR'S REPRENSENTATIVE AND CERTIFICATION:

    Representative

    Name: Dave AllredAddress: Newfield Production Company

    Route 3, Box 3630Myton, UT 84052

    Telephone: (435) 646-3721

    Ten Point Well ProgramThirteen Point Well ProgramPage 7 of 8

    a) Newfield Production Company is responsible for informing all persons in the area whoare associated with this project that they will be subject to prosecution for knowinglydisturbing historic or archaeological sites, or for collecting artifacts. If historic orarchaeological materials are uncovered during construction, Newfield is to immediatelystop work that might further disturb such materials and contact the Authorized Officer.

    b) Newfield Production will control noxious weeds along rights-of-way for roads, pipelines,well sites or other applicable facilities. On State administered land it is required that aPesticide Use Proposal shall be submitted and given approval prior to the application ofherbicides or other possible hazardous chemicals.

    c) Drilling rigs and/or equipment used during drilling operations on this well site will not bestacked or stored on State Lands after the conclusion of drilling operations or at any othertime without State authorization. However, if State authorization is obtained, it is only atemporary measure to allow time to make arrangements for permanent storage oncommercial facilities.

    Additional Surface Stipulations

    All lease and/or unit operations will be conducted in such a manner that full compliance is madewith all applicable laws and regulations, Onshore Oil and Gas Orders, the approved plan ofoperations and any applicable Notice to Lessees. A copy of these conditions will be furnished tothe field representative to ensure compliance.

    Hazardous Material Declaration

    Newfield Production Company guarantees that during the drilling and completion of the CastleDraw State N-2-9-17, Newfield will not use, produce, store, transport or dispose 10,000# annuallyof any of the hazardous chemicals contained in the Environmental Protection Agency'sconsolidated list of chemicals subject to reporting under Title III Superfund Amendments andReauthorization Act (SARA) of 1986. Newfield also guarantees that during the drilling andcompletion of the Castle Draw State N-2-9-17 Newfield will use, produce, store, transport ordispose less than the threshold planning quantity (T.P.Q.)of any extremely hazardous substancesas defined in 40 CFR 355.

    A complete copy of the approved APD, if applicable, shall be on location during the constructionof the location and drilling activities.

    Newfield Production Company or a contractor employed by Newfield Production shall contact theState office at (801) 722-3417, 48 hours prior to construction activities.

    The State office shall be notified upon site completion prior to moving on the drilling rig.

    13. LESSEE'S OR OPERATOR'S REPRENSENTATIVE AND CERTIFICATION:

    Representative

    Name: Dave AllredAddress: Newfield Production Company

    Route 3, Box 3630Myton, UT 84052

    Telephone: (435) 646-3721

  • Ten Point Well ProgramThirteen Point Well ProgramPage 8 of 8

    Please be advised that Newfield Production Company is considered to be the operator of well #N-2-9-17, SE/NW Section 2, T9S, Rl7E, LEASE #ML-45555, Uintah County, Utah and isresponsible under the terms and conditions of the lease for the operations conducted upon theleased lands. Bond coverage is provided by Hartford Accident #4471291.

    I hereby certify that the proposed drill site and access route have been inspected, and Lam familiarwith the conditions which currently exist; that the statements made in this plan are true and correctto the best of my knowledge; and that the work associated with the operations proposed here willbe performed by Newfield Production Company and its contractors and subcontractors inconformity with this plan and the terms and conditions under which it is approved. This statementis subject to the provisions of the 18 U.S.C. 1001 for the filing of a false statement.

    11/20/08Date Mandie Crozier

    Regulatory SpecialistNewfield Production

    Ten Point Well ProgramThirteen Point Well ProgramPage 8 of 8

    Please be advised that Newfield Production Company is considered to be the operator of well #N-2-9-17, SE/NW Section 2, T9S, Rl7E, LEASE #ML-45555, Uintah County, Utah and isresponsible under the terms and conditions of the lease for the operations conducted upon theleased lands. Bond coverage is provided by Hartford Accident #4471291.

    I hereby certify that the proposed drill site and access route have been inspected, and Lam familiarwith the conditions which currently exist; that the statements made in this plan are true and correctto the best of my knowledge; and that the work associated with the operations proposed here willbe performed by Newfield Production Company and its contractors and subcontractors inconformity with this plan and the terms and conditions under which it is approved. This statementis subject to the provisions of the 18 U.S.C. 1001 for the filing of a false statement.

    11/20/08Date Mandie Crozier

    Regulatory SpecialistNewfield Production

    Ten Point Well ProgramThirteen Point Well ProgramPage 8 of 8

    Please be advised that Newfield Production Company is considered to be the operator of well #N-2-9-17, SE/NW Section 2, T9S, Rl7E, LEASE #ML-45555, Uintah County, Utah and isresponsible under the terms and conditions of the lease for the operations conducted upon theleased lands. Bond coverage is provided by Hartford Accident #4471291.

    I hereby certify that the proposed drill site and access route have been inspected, and Lam familiarwith the conditions which currently exist; that the statements made in this plan are true and correctto the best of my knowledge; and that the work associated with the operations proposed here willbe performed by Newfield Production Company and its contractors and subcontractors inconformity with this plan and the terms and conditions under which it is approved. This statementis subject to the provisions of the 18 U.S.C. 1001 for the filing of a false statement.

    11/20/08Date Mandie Crozier

    Regulatory SpecialistNewfield Production

    Ten Point Well ProgramThirteen Point Well ProgramPage 8 of 8

    Please be advised that Newfield Production Company is considered to be the operator of well #N-2-9-17, SE/NW Section 2, T9S, Rl7E, LEASE #ML-45555, Uintah County, Utah and isresponsible under the terms and conditions of the lease for the operations conducted upon theleased lands. Bond coverage is provided by Hartford Accident #4471291.

    I hereby certify that the proposed drill site and access route have been inspected, and Lam familiarwith the conditions which currently exist; that the statements made in this plan are true and correctto the best of my knowledge; and that the work associated with the operations proposed here willbe performed by Newfield Production Company and its contractors and subcontractors inconformity with this plan and the terms and conditions under which it is approved. This statementis subject to the provisions of the 18 U.S.C. 1001 for the filing of a false statement.

    11/20/08Date Mandie Crozier

    Regulatory SpecialistNewfield Production

  • NEWFIELD Newfield Production CompanyProject: Monument Butte

    Site: Castle Draw N-2-9-17ROCKY MOUNTAINS weli:castleDraw N-2-9-17

    Wellbore: Wellbore #1Design: Design #1

    1800

    300

    2250

    2000 400

    500

    700600

    3800 800

    -730 -630 -5)0 -430 -3]O -230 -130 n 1004000 West(-)/East(+) (200 ftlin)

    4050

    SECTION DETAILS

    4500 Sec MD Inc Azi TVD +N/-S +El-W DLeg TFace VSec Target1 0.0 0.00 0.00 0.0 0.0 0 0 0.00 0.00 0.02 600.0 0.00 0.00 600.0 0.0 0.0 0.00 0.00 0.03 1246.3 9.69 226.08 1243.2 -37.8 -39.3 1.50 226.08 54.5

    4950 500( 4 6127.8 9.69 226.08 6055.0 -608.0 -631.4 0 00 0.00 876.5 N-2-9-17

    5100 PROJECT DETAILS: Monument Butte M Azimuths toTrue NorthMagnetic North: 11.60°

    Geodetic S stem: US State Plane 1983YDatum: North American Datum 1983 Magnetic Field

    5850 Ellipsoid: GRS 1980 Strength: 52575.9snTsooo - Zone: Utah Central Zone Dip Angle: 65.90°- - 6428 System Datum: Mean Sea Level Date: 11/21/2008Model: IGRF200510

    o 480 ano Created by: Hans WychgramVertical Section at 220.08° Date:

    NEWFIELD Newfield Production CompanyProject: Monument Butte

    Site: Castle Draw N-2-9-17ROCKY MOUNTAINS weli:castleDraw N-2-9-17

    Wellbore: Wellbore #1Design: Design #1

    1800

    300

    2250

    2000 400

    500

    700600

    3800 800

    -730 -630 -5)0 -430 -3]O -230 -130 n 1004000 West(-)/East(+) (200 ftlin)

    4050

    SECTION DETAILS

    4500 Sec MD Inc Azi TVD +N/-S +El-W DLeg TFace VSec Target1 0.0 0.00 0.00 0.0 0.0 0 0 0.00 0.00 0.02 600.0 0.00 0.00 600.0 0.0 0.0 0.00 0.00 0.03 1246.3 9.69 226.08 1243.2 -37.8 -39.3 1.50 226.08 54.5

    4950 500( 4 6127.8 9.69 226.08 6055.0 -608.0 -631.4 0 00 0.00 876.5 N-2-9-17

    5100 PROJECT DETAILS: Monument Butte M Azimuths toTrue NorthMagnetic North: 11.60°

    Geodetic S stem: US State Plane 1983YDatum: North American Datum 1983 Magnetic Field

    5850 Ellipsoid: GRS 1980 Strength: 52575.9snTsooo - Zone: Utah Central Zone Dip Angle: 65.90°- - 6428 System Datum: Mean Sea Level Date: 11/21/2008Model: IGRF200510

    o 480 ano Created by: Hans WychgramVertical Section at 220.08° Date:

    NEWFIELD Newfield Production CompanyProject: Monument Butte

    Site: Castle Draw N-2-9-17ROCKY MOUNTAINS weli:castleDraw N-2-9-17

    Wellbore: Wellbore #1Design: Design #1

    1800

    300

    2250

    2000 400

    500

    700600

    3800 800

    -730 -630 -5)0 -430 -3]O -230 -130 n 1004000 West(-)/East(+) (200 ftlin)

    4050

    SECTION DETAILS

    4500 Sec MD Inc Azi TVD +N/-S +El-W DLeg TFace VSec Target1 0.0 0.00 0.00 0.0 0.0 0 0 0.00 0.00 0.02 600.0 0.00 0.00 600.0 0.0 0.0 0.00 0.00 0.03 1246.3 9.69 226.08 1243.2 -37.8 -39.3 1.50 226.08 54.5

    4950 500( 4 6127.8 9.69 226.08 6055.0 -608.0 -631.4 0 00 0.00 876.5 N-2-9-17

    5100 PROJECT DETAILS: Monument Butte M Azimuths toTrue NorthMagnetic North: 11.60°

    Geodetic S stem: US State Plane 1983YDatum: North American Datum 1983 Magnetic Field

    5850 Ellipsoid: GRS 1980 Strength: 52575.9snTsooo - Zone: Utah Central Zone Dip Angle: 65.90°- - 6428 System Datum: Mean Sea Level Date: 11/21/2008Model: IGRF200510

    o 480 ano Created by: Hans WychgramVertical Section at 220.08° Date:

    NEWFIELD Newfield Production CompanyProject: Monument Butte

    Site: Castle Draw N-2-9-17ROCKY MOUNTAINS weli:castleDraw N-2-9-17

    Wellbore: Wellbore #1Design: Design #1

    1800

    300

    2250

    2000 400

    500

    700600

    3800 800

    -730 -630 -5)0 -430 -3]O -230 -130 n 1004000 West(-)/East(+) (200 ftlin)

    4050

    SECTION DETAILS

    4500 Sec MD Inc Azi TVD +N/-S +El-W DLeg TFace VSec Target1 0.0 0.00 0.00 0.0 0.0 0 0 0.00 0.00 0.02 600.0 0.00 0.00 600.0 0.0 0.0 0.00 0.00 0.03 1246.3 9.69 226.08 1243.2 -37.8 -39.3 1.50 226.08 54.5

    4950 500( 4 6127.8 9.69 226.08 6055.0 -608.0 -631.4 0 00 0.00 876.5 N-2-9-17

    5100 PROJECT DETAILS: Monument Butte M Azimuths toTrue NorthMagnetic North: 11.60°

    Geodetic S stem: US State Plane 1983YDatum: North American Datum 1983 Magnetic Field

    5850 Ellipsoid: GRS 1980 Strength: 52575.9snTsooo - Zone: Utah Central Zone Dip Angle: 65.90°- - 6428 System Datum: Mean Sea Level Date: 11/21/2008Model: IGRF200510

    o 480 ano Created by: Hans WychgramVertical Section at 220.08° Date:

  • NEWFIELD Newfield Production CompanyPlanning Report

    ROCKY MOUNTAINS

    Database: EDM 2003.21 Single User Db Local Co-ordinate Reference: Well Castle Draw N-2-9-17Company: Newfield Production Company TVDReference: [email protected] (NDSI #2)Project: Monument Butte MD Reference: [email protected] (NDSI #2)Site: Castle Draw N-2-9-17 North Reference: TrueWeli: Castle Draw N-2-9-17 Survey Calculation Method: MinimumCurvatureWellbore: Wellbore #1Design: Design #1

    Project Monument Butte

    Map System: US State Plane 1983 System Datum: Mean Sea LevelGeo Datum: North American Datum 1983Map Zone: Utah Central Zone

    Site Castle Draw N-2-9-17

    Site Position: Northing: 2,193,001.42 m Latitude: 40° 3' 42.530 NFrom: Lat/Long Easting: 629,982.82 m Longitude: 109° 58' 34.510 WPosition Uncertainty: 0.0 ft Slot Radius: in Grid Convergence: 0.98 °

    Well Castle Draw N-2-9-17

    Well Position +NI-S 0.0 ft Northing: 2,193,001.42 m Latitude: 40° 3' 42.530 N+El-W 0.0 ft Easting: 629,982.82 m Longitude: 109° 58' 34.510 W

    Position Uncertainty 0.0 ft Wellhead Elevation: ft Ground Level: 5,049.0ft

    Wellbore Wellbore #1

    Magnetics Model Name Sample Date Decilnation Dip Angle Fleid Strength(*) (*) (nT)IGRF200510 11/21/2008 11.60 65.90 52,576

    Design Design #1

    Audit Notes:

    Version: Phase: PROTOTYPE Tie On Depth: 0.0

    Vertical Section: Depth From (TVD) +NI-S +El-W Direction(ft) . (ft) (ft) (*)0.0 0.0 0.0 226.08

    Plan Sections

    Measured Vertical Dogleg Build TurnDepth Inclination Azimuth Depth +NI-S +El-W Rate Rate Rate TFO

    (ft) (*) (*) (ft) (ft) (ft) (°Ii00ft) (°Ii00ft) (°Ii00ft) (*) Target

    0.0 0.00 0.00 0.0 0.0 0.0 0.00 0.00 0.00 0.00600.0 0.00 0.00 600.0 0.0 0.0 0.00 0.00 0.00 0.00

    1,246.3 9.69 226.08 1,243.2 -37.8 -39.3 1.50 1.50 0.00 226.086,127.8 9.69 226.08 6,055.0 -608.0 -631.4 0.00 0.00 0.00 0.00 N-2-9-17

    11/21/2008 7 50 08AM Page 2 COMPASS 200121 Build

    NEWFIELD Newfield Production CompanyPlanning Report

    ROCKY MOUNTAINS

    Database: EDM 2003.21 Single User Db Local Co-ordinate Reference: Well Castle Draw N-2-9-17Company: Newfield Production Company TVDReference: [email protected] (NDSI #2)Project: Monument Butte MD Reference: [email protected] (NDSI #2)Site: Castle Draw N-2-9-17 North Reference: TrueWeli: Castle Draw N-2-9-17 Survey Calculation Method: MinimumCurvatureWellbore: Wellbore #1Design: Design #1

    Project Monument Butte

    Map System: US State Plane 1983 System Datum: Mean Sea LevelGeo Datum: North American Datum 1983Map Zone: Utah Central Zone

    Site Castle Draw N-2-9-17

    Site Position: Northing: 2,193,001.42 m Latitude: 40° 3' 42.530 NFrom: Lat/Long Easting: 629,982.82 m Longitude: 109° 58' 34.510 WPosition Uncertainty: 0.0 ft Slot Radius: in Grid Convergence: 0.98

    °

    Well Castle Draw N-2-9-17

    Well Position +NI-S 0.0 ft Northing: 2,193,001.42 m Latitude: 40° 3' 42.530 N+El-W 0.0 ft Easting: 629,982.82 m Longitude: 109° 58' 34.510 W

    Position Uncertainty 0.0 ft Wellhead Elevation: ft Ground Level: 5,049.0ft

    Wellbore Wellbore #1

    Magnetics Model Name Sample Date Decilnation Dip Angle Fleid Strength(*) (*) (nT)IGRF200510 11/21/2008 11.60 65.90 52,576

    Design Design #1

    Audit Notes:

    Version: Phase: PROTOTYPE Tie On Depth: 0.0

    Vertical Section: Depth From (TVD) +NI-S +El-W Direction(ft) . (ft) (ft) (*)0.0 0.0 0.0 226.08

    Plan Sections

    Measured Vertical Dogleg Build TurnDepth Inclination Azimuth Depth +NI-S +El-W Rate Rate Rate TFO

    (ft) (*) (*) (ft) (ft) (ft) (°Ii00ft) (°Ii00ft) (°Ii00ft) (*) Target

    0.0 0.00 0.00 0.0 0.0 0.0 0.00 0.00 0.00 0.00600.0 0.00 0.00 600.0 0.0 0.0 0.00 0.00 0.00 0.00

    1,246.3 9.69 226.08 1,243.2 -37.8 -39.3 1.50 1.50 0.00 226.086,127.8 9.69 226.08 6,055.0 -608.0 -631.4 0.00 0.00 0.00 0.00 N-2-9-17

    11/21/2008 7 50 08AM Page 2 COMPASS 200121 Build

    NEWFIELD Newfield Production CompanyPlanning Report

    ROCKY MOUNTAINS

    Database: EDM 2003.21 Single User Db Local Co-ordinate Reference: Well Castle Draw N-2-9-17Company: Newfield Production Company TVDReference: [email protected] (NDSI #2)Project: Monument Butte MD Reference: [email protected] (NDSI #2)Site: Castle Draw N-2-9-17 North Reference: TrueWeli: Castle Draw N-2-9-17 Survey Calculation Method: MinimumCurvatureWellbore: Wellbore #1Design: Design #1

    Project Monument Butte

    Map System: US State Plane 1983 System Datum: Mean Sea LevelGeo Datum: North American Datum 1983Map Zone: Utah Central Zone

    Site Castle Draw N-2-9-17

    Site Position: Northing: 2,193,001.42 m Latitude: 40° 3' 42.530 NFrom: Lat/Long Easting: 629,982.82 m Longitude: 109° 58' 34.510 WPosition Uncertainty: 0.0 ft Slot Radius: in Grid Convergence: 0.98

    °

    Well Castle Draw N-2-9-17

    Well Position +NI-S 0.0 ft Northing: 2,193,001.42 m Latitude: 40° 3' 42.530 N+El-W 0.0 ft Easting: 629,982.82 m Longitude: 109° 58' 34.510 W

    Position Uncertainty 0.0 ft Wellhead Elevation: ft Ground Level: 5,049.0ft

    Wellbore Wellbore #1

    Magnetics Model Name Sample Date Decilnation Dip Angle Fleid Strength(*) (*) (nT)IGRF200510 11/21/2008 11.60 65.90 52,576

    Design Design #1

    Audit Notes:

    Version: Phase: PROTOTYPE Tie On Depth: 0.0

    Vertical Section: Depth From (TVD) +NI-S +El-W Direction(ft) . (ft) (ft) (*)0.0 0.0 0.0 226.08

    Plan Sections

    Measured Vertical Dogleg Build TurnDepth Inclination Azimuth Depth +NI-S +El-W Rate Rate Rate TFO

    (ft) (*) (*) (ft) (ft) (ft) (°Ii00ft) (°Ii00ft) (°Ii00ft) (*) Target

    0.0 0.00 0.00 0.0 0.0 0.0 0.00 0.00 0.00 0.00600.0 0.00 0.00 600.0 0.0 0.0 0.00 0.00 0.00 0.00

    1,246.3 9.69 226.08 1,243.2 -37.8 -39.3 1.50 1.50 0.00 226.086,127.8 9.69 226.08 6,055.0 -608.0 -631.4 0.00 0.00 0.00 0.00 N-2-9-17

    11/21/2008 7 50 08AM Page 2 COMPASS 200121 Build

    NEWFIELD Newfield Production CompanyPlanning Report

    ROCKY MOUNTAINS

    Database: EDM 2003.21 Single User Db Local Co-ordinate Reference: Well Castle Draw N-2-9-17Company: Newfield Production Company TVDReference: [email protected] (NDSI #2)Project: Monument Butte MD Reference: [email protected] (NDSI #2)Site: Castle Draw N-2-9-17 North Reference: TrueWeli: Castle Draw N-2-9-17 Survey Calculation Method: MinimumCurvatureWellbore: Wellbore #1Design: Design #1

    Project Monument Butte

    Map System: US State Plane 1983 System Datum: Mean Sea LevelGeo Datum: North American Datum 1983Map Zone: Utah Central Zone

    Site Castle Draw N-2-9-17

    Site Position: Northing: 2,193,001.42 m Latitude: 40° 3' 42.530 NFrom: Lat/Long Easting: 629,982.82 m Longitude: 109° 58' 34.510 WPosition Uncertainty: 0.0 ft Slot Radius: in Grid Convergence: 0.98

    °

    Well Castle Draw N-2-9-17

    Well Position +NI-S 0.0 ft Northing: 2,193,001.42 m Latitude: 40° 3' 42.530 N+El-W 0.0 ft Easting: 629,982.82 m Longitude: 109° 58' 34.510 W

    Position Uncertainty 0.0 ft Wellhead Elevation: ft Ground Level: 5,049.0ft

    Wellbore Wellbore #1

    Magnetics Model Name Sample Date Decilnation Dip Angle Fleid Strength(*) (*) (nT)IGRF200510 11/21/2008 11.60 65.90 52,576

    Design Design #1

    Audit Notes:

    Version: Phase: PROTOTYPE Tie On Depth: 0.0

    Vertical Section: Depth From (TVD) +NI-S +El-W Direction(ft) . (ft) (ft) (*)0.0 0.0 0.0 226.08

    Plan Sections

    Measured Vertical Dogleg Build TurnDepth Inclination Azimuth Depth +NI-S +El-W Rate Rate Rate TFO

    (ft) (*) (*) (ft) (ft) (ft) (°Ii00ft) (°Ii00ft) (°Ii00ft) (*) Target

    0.0 0.00 0.00 0.0 0.0 0.0 0.00 0.00 0.00 0.00600.0 0.00 0.00 600.0 0.0 0.0 0.00 0.00 0.00 0.00

    1,246.3 9.69 226.08 1,243.2 -37.8 -39.3 1.50 1.50 0.00 226.086,127.8 9.69 226.08 6,055.0 -608.0 -631.4 0.00 0.00 0.00 0.00 N-2-9-17

    11/21/2008 7 50 08AM Page 2 COMPASS 200121 Build

  • NEWFIELD Newfield Production CompanyPlanning Report

    ROCKY MOUNTAINS

    Database: EDM2003.21 Single User Db Local Co-ordinate Reference: Well Castle Draw N-2-9-17Company: Newfield Production Company TVD Reference: [email protected] (NDSI #2)Project: Monument Butte MD Reference: [email protected] (NDSI #2)Site: Castle Draw N-2-9-17 North Reference: TrueWell: Castle Draw N-2-9-17 Survey Calculation Method: MinimumCurvatureWellbore: Wellbore #1Design: Design #1

    Planned Survey

    Measured Vertical Vertical Dogleg Build TurnDepth Inclination Azimuth Depth +NI-S +El-W Section Rate Rate Rate

    (It) (°) (*) (It) (ft) (ft) (ft) (°Ii00ft) (°Ii00ft) (°Ii00ft)

    0.0 0.00 0.00 0.0 0.0 0.0 0.0 0.00 0.00 0.00100.0 0.00 0.00 100.0 0.0 0.0 0.0 0.00 0.00 0.00200.0 0.00 0.00 200.0 0.0 0.0 0.0 0.00 0.00 0.00300.0 0.00 0.00 300.0 0.0 0.0 0.0 0.00 0.00 0.00400.0 0.00 0.00 400.0 0.0 0.0 0.0 0.00 0.00 0.00

    500.0 0.00 0.00 500.0 0.0 0.0 0.0 0.00 0.00 0.00600.0 0.00 0.00 600.0 0.0 0.0 0.0 0.00 0.00 0.00700.0 1.50 226.08 700.0 -0.9 -0.9 1.3 1.50 1.50 0.00800.0 3.00 226.08 799.9 -3.6 -3.8 5.2 1.50 1.50 0.00900.0 4.50 226.08 899.7 -8.2 -8.5 11.8 1.50 1.50 0.00

    1,000.0 6.00 226.08 999.3 -14.5 -15.1 20.9 1.50 1.50 0.001,100.0 7.50 226.08 1,098.6 -22.7 -23.5 32.7 1.50 1.50 0.001,200.0 9.00 226.08 1,197.5 -32.6 -33.9 47.0 1.50 1.50 0.001,246.3 9.69 226.08 1,243.2 -37.8 -39.3 54.5 1.50 1.50 0.001,300.0 9.69 226.08 1,296.2 -44.1 -45.8 63.6 0.00 0.00 0.00

    1,400.0 9.69 226.08 1,394.7 -55.8 -57.9 80.4 0.00 0.00 0.001,500.0 9.69 226.08 1,493.3 -67.5 -70.1 97.3 0.00 0.00 0.001,600.0 9.69 226.08 1,591.9 -79.1 -82.2 114.1 0.00 0.00 0.001,700.0 9.69 226.08 1,690.4 -90.8 -94.3 130.9 0.00 0.00 0.001,800.0 9.69 226.08 1,789.0 -102.5 -106.4 147.8 0.00 0.00 0.001,900.0 9.69 226.08 1,887.6 -114.2 -118.6 164.6 0.00 0.00 0.002,000.0 9.69 226.08 1,986.2 -125.9 -130.7 181.5 0.00 0.00 0.002,100.0 9.69 226.08 2,084.7 -137.6 -142.8 198.3 0.00 0.00 0.002,200.0 9.69 226.08 2,183.3 -149.2 -155.0 215.1 0.00 0.00 0.002,300.0 9.69 226.08 2,281.9 -160.9 -167.1 232.0 0.00 0.00 0.00

    2,400.0 9.69 226.08 2,380.4 -172.6 -179.2 248.8 0.00 0.00 0.002,500.0 9.69 226.08 2,479.0 -184.3 -191.4 265.7 0.00 0.00 0.002,600.0 9.69 226.08 2,577.6 -196.0 -203.5 282.5 0.00 0.00 0.002,700.0 9.69 226.08 2,676.2 -207.6 -215.6 299.3 0.00 0.00 0.002,800.0 9.69 226.08 2,774.7 -219.3 -227.7 316.2 0.00 0.00 0.00

    2,900.0 9.69 226.08 2,873.3 -231.0 -239.9 333.0 0.00 0.00 0.003,000.0 9.69 226.08 2,971.9 -242.7 -252.0 349.8 0.00 0.00 0.003,100.0 9.69 226.08 3,070.5 -254.4 -264.1 366.7 0.00 0.00 0.003,200.0 9.69 226.08 3,169.0 -266.0 -276.3 383.5 0.00 0.00 0.003,300.0 9.69 226.08 3,267.6 -277.7 -288.4 400.4 0.00 0.00 0.00

    3,400.0 9.69 226.08 3,366.2 -289.4 -300.5 417.2 0.00 0.00 0.003,500.0 9.69 226.08 3,464.7 -301.1 -312.6 434.0 0.00 0.00 0.003,600.0 9.69 226.08 3,563.3 -312.8 -324.8 450.9 0.00 0.00 0.003,700.0 9.69 226.08 3,661.9 -324.4 -336.9 467.7 0.00 0.00 0.003,800.0 9.69 226.08 3,760.5 -336.1 -349.0 484.6 0.00 0.00 0.00

    3,900.0 9.69 226.08 3,859.0 -347.8 -361.2 501.4 0.00 0.00 0.004,000.0 9.69 226.08 3,957.6 -359.5 -373.3 518.2 0.00 0.00 0.004,100.0 9.69 226.08 4,056.2 -371.2 -385.4 535.1 0.00 0.00 0.004,200.0 9.69 226.08 4,154.7 -382.8 -397.5 551.9 0.00 0.00 0.004,300.0 9.69 226.08 4,253.3 -394.5 -409.7 568.8 0.00 0.00 0.00

    4,400.0 9.69 226.08 4,351.9 -406.2 -421.8 585.6 0.00 0.00 0.004,500.0 9.69 226.08 4,450.5 -417.9 -433.9 602.4 0.00 0.00 0.004,600.0 9.69 226.08 4,549.0 -429.6 -446.1 619.3 0.00 0.00 0.004,700.0 9.69 226.08 4,647.6 -441.2 -458.2 636.1 0.00 0.00 0.004,800.0 9.69 226.08 4,746.2 -452.9 -470.3 652.9 0.00 0.00 0.00

    4,900.0 9.69 226.08 4,844.7 -464.6 -482.5 669.8 0.00 0.00 0.005,000.0 9.69 226.08 4,943.3 -476.3 -494.6 686.6 0.00 0.00 0.005,100.0 9.69 226.08 5,041.9 -488.0 -506.7 703.5 0.00 0.00 0.005,200.0 9.69 226.08 5,140.5 -499.6 -518.8 720.3 0.00 0.00 0.00

    11/21/2008 7:50:08AM Page 3 COMPASS 2003.21 Build

    NEWFIELD Newfield Production CompanyPlanning Report

    ROCKY MOUNTAINS

    Database: EDM2003.21 Single User Db Local Co-ordinate Reference: Well Castle Draw N-2-9-17Company: Newfield Production Company TVD Reference: [email protected] (NDSI #2)Project: Monument Butte MD Reference: [email protected] (NDSI #2)Site: Cas