a-mtk pnp solution and... · a-mtk pnp solution . panoview . introduction & user guide ....
TRANSCRIPT
A-MTK PnP Solution Introduction & User Guide Panoview
i-Panoview Wireless Cube Camera
3
Step 4: Type your Wifi password
Step 1: Plug-in Antenna and plug-in 12V 1A power adaptor
Plug-in 12V 1A power adaptor
Plug-in Antenna
Step 2: Open the APP “Panoview” in your smart phone and click “First Install”
Step 3: Click “WIFI”
4
First Install When you first start the IP camera
Reset When you forget password, or change access point, pls reset IP camera
Add local camera Apps will auto search same IP camera under same access point
Add remote camera
Input “DIPS ID” to add IP camera
Step 5: Searching for wireless cameras in same network environment
Step 6: It will automatically find the camera. “Set” camera password or “skip”.
Step 7: Set your camera name. For Ex.: Office 1
Step 8: Camera setup successful.
5
Click the red marked button, to get in camera settings Camera Settings Menu
“Edit” your camera name (See page 7)
“Delete” the camera
“Modify” your password (See page 7)
“See” your SD card status (See page 7)
“Change” camera color and brightness (See page 8)
“Update” camera firmware (See page 8)
“Check” your camera's network status (See page 8)
6
7
Edit Camera: Set your new camera name or mark “Only this device can view” to lock the camera
Modify Password: Set your new password
SD card Setting: If you first time mount a SD card to the camera make sure you “format” and see the ”ready” status
8
Camera Image: Here you can change the “Color, Brightness, Contrast, Sharpness and 180 degree rotation” of the camera
Firmware Update: Time to time you can check this page to see is there a new Firmware available or not
Network Status: Here you can see the Network Status of the camera
Main Page: Vertical View Snapshot
Record
Digital Zoom in and out
Turn on build-in speaker
Turn on build-in microphone
Split Screen 1 or 4
Playback menu
Event Settings
Icon description:
Horizontal View
9
10
Edit Settings Menu:
Motion Detection: Turn On Mark the area you want to motion detect and adjust the sensivity
Audio Detection: Turn On Adjust the sensivity of the audio detection
11
Camera Tampering: Turn On It can trigger condition that when the camera detects that is being tampered with. For Ex.: redirection, blocking, defocusing
PIR Detection: Turn On PIR based motion detection measures infrared (IR) light radiating from objects in its field of view
Recording: Turn On By any event trigger it will record to you SD card or Cloud server
12
Push notification: Turn On By any event trigger it will send to your smartphone a push notification through mobile APP “Panoview”
Snapshot: Turn On By any event trigger it will snapshot the event detection moment and save in your mobile APP
Audio Alarm: Turn On By any event trigger it will audio alert through the cube camera build-in speaker
13
Recording Settings Select the event recording resolution HD or VGA Cloud Settings
When you create a GMAIL account in Google or use your existing GMAIL account and login inside the mobile APP it will save all event detection moments to your Google Drive Cloud server
14
Playback Menu:
Snapshot Manager All snapshots are save in this page if you want to export to your mobile Album you can click “Export to Album”
Playback 1. Local Record Playback: You can playback the videos in your mSD card. 2. Remote Record Playback: You can playback the videos in your Google Drive Cloud Server. Note: Remember to turn on the recording inside the “Event Settings” page.
15
Playback Menu:
Event Log In event log you can see when which detection has been triggered
About You can see the mobile APP version.
Thanks for your attention
TEL :+886-2-82269855 FAX:+886-2-82269800 Email : [email protected] Address : 5F-3, No. 186, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan(R.O.C)