elearning courses 21016-00 - labvolt series by festo didactic98... · this site-license elearning...

LabVolt Series

Datasheet

eLearning Courses21016-00

Festo Didactic

en

06/2021

eLearning Courses, LabVolt Series

© Festo Didactic 2

••

•

Table of Contents

General Description _________________________________________________________________________________ 2List of Available Training Systems______________________________________________________________________ 2Equipment Description ______________________________________________________________________________ 3

General DescriptionThe book-based courseware for many training systems are also available in eLearning format for users who prefer a computer-based approach. Each site-license eLearning course is intended to be used with its corresponding training system. The eLearning content presents units, exercises, and exercise procedures with enhanced graphics and/or animations to improve comprehension of the book-based content. Student manuals and instructor guides are incorporated into menu trees and accessible based on user rights. In most courses, the presentation of technical content is accompanied by voice-over narration to minimize the amount of on-screen reading.

This datasheet lists all currently available eLearning courses. Each is available in three learning platforms:

eSeries: this format is implemented using the MindSight eLearning System.SCORM: this format is SCORM-based, and designed to be hosted by a third-party, SCORM 1.2 compliant management system.Stand-Alone: this format is available on CD-ROM. It runs on a web browser and does not require any management system. (Note: student data, navigational tracking, and the saving of assessments are not available without an LMS. All user data is lost upon exiting the Stand-Alone curriculum.)

List of Available Training Systems

Qty DescriptionModel number

1 Industrial Controls Training System - eSeries _________________________________________ 586013 (3161-E0)1 Programmable Logic Controller - Basic Programming - eSeries ___________________________ 587571 (3280-E0)1 Refrigeration Training System - eSeries ______________________________________________ 763507 (3490-E0)1 Electromechanical Training System - eSeries _________________________________________ 586998 (8980-E0)1 DC and AC Power Circuits Training System - eSeries ___________________________________ 579791 (21001-E0)1 Grid-Tie Training System - eSeries _________________________________________________ 583450 (46546-E0)1 Nacelle Operation and Maintenance - eSeries _______________________________________ 583451 (46547-E0)1 Solar Thermal Energy Training System - eSeries ______________________________________ 579818 (46548-E0)1 Pumps Training System - eSeries __________________________________________________ 583474 (46749-E0)1 Piping Fundamentals - eSeries ____________________________________________________ 583477 (46759-E0)1 Industrial Wiring Training System - eSeries __________________________________________ 583479 (46849-E0)1 Temperature Processes - eSeries __________________________________________________ 588352 (46944-E0)1 Pressure, Flow, and Level Processes - eSeries _______________________________________ 588411 (46977-E0)1 Complete FACET Module Curriculum Bundle (All 29 modules) - eSeries ___________________ 585743 (94600-E0)


3 © Festo Didactic

•••

•••

•••••

Equipment Description

Industrial Controls Training System - eSeries 586013 (3161-E0)

This site-license eLearning course bundle is intended to be used in conjunction with the Industrial Controls Training System, Series 8036. It contains five courses, all of which begin with a pretest and end with a posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.

The following learning platforms are available:

3161-E – Industrial Controls Training System - eSeries3161-F – Industrial Controls Training System - SCORM3161-G – Industrial Controls Training System - Stand-Alone

It is also possible to obtain each of the above eLearning formats with the addition of the Industrial Controls Training System Simulation Software, Model 3161-H, a simulation software that allows students to complete all the exercises in the training system courseware on a computer without the need for any actual equipment. The following variants are available:

3161-J – Industrial Controls Training System and Simulation Software - eSeries3161-K – Industrial Controls Training System and Simulation Software - SCORM3161-L – Industrial Controls Training System and Simulation Software - Stand-Alone

Topic Coverage

Basic ControlsProgrammable Logic ControllerMotor DrivesSensorsTroubleshooting

SpecificationsParameter Value

Computer RequirementsA currently available personal computer running under one of the following operating systems: Windows® 7 or

Windows® 8.


© Festo Didactic 4

•••

•••••••••

Programmable Logic Controller - Basic Programming - eSeries 587571 (3280-E0)

This eSeries course introduces students to the basic principles of PLC programming. It is meant to be used in conjunction with a Programmable Logic Controller Trainer, Model 3240 or Model 3270. It contains one course which begins with a pretest and ends with a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to

minimize the amount of on-screen reading.


3280-E: Programmable Logic Controller - Basic Programming - eSeries3280-F: Programmable Logic Controller - Basic Programming - SCORM3280-G: Programmable Logic Controller - Basic Programming - Stand-Alone

Topic Coverage

Familiarization with the PLC Trainer and RSLogix MicroProgramming BasicsOnline OperationsLatchingTimerCounterSequencerComparisonShift Register



Windows® 8.


5 © Festo Didactic

•••

••••••••

Refrigeration Training System - eSeries 763507 (3490-E0)

This site-license eLearning course bundle is intended to be used in conjunction with the Refrigeration Training System, Model 3431. It contains one course, which begins with a pretest and ends with a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.


3490-E – Refrigeration Training System - eSeries3490-F – Refrigeration Training System - SCORM3490-G – Refrigeration Training System - Stand-Alone

Topic Coverage

System OverviewRefrigeration FundamentalsRefrigeration Components (Part 1)Refrigeration Components (Part 2) & EnthalpyElectrical Control of Refrigeration SystemsPressure & Temperature Control in Refrigeration SystemsThermostatic Expansion Valve AdjustmentTroubleshooting



Windows® 8.

Electromechanical Training System - eSeries 586998 (8980-E0)

This site-license course is intended to be used in conjunction with either the Computer-Assisted 0.2 kW Electromechanical Training System, Model 8006, or the Electromechanical Systems Simulation Software, Model 8970. It contains all the technical content and exercise procedures of two manuals: Power Circuits and Transformers, Model 30328, and AC/DC Motors and Generators, Model 30329. Each course begins with a pretest and ends with a posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise presentation of technical content is accompanied by

voiceover narration to minimize the amount of on-screen reading.


© Festo Didactic 6

•••

•

••

•••


8980-E: Electromechanical Training System - eSeries8980-F: Electromechanical Training System - SCORM8980-G: Electromechanical Training System - Stand-Alone

Users running the Tech-Lab version of the Electromechanical Training System may upgrade their software to an eSeries course using the following variant:

8980-U: Electromechanical Training System Upgrade - eSeries

Topic Coverage

Power Circuits and TransformersAC/DC Motors and Generators

DC and AC Power Circuits Training System - eSeries 579791 (21001-E0)

This site-license eLearning course is intended to be used in conjunction with the DC and AC Power Circuits Training System, Model 8010-1. This eLearning course covers courses DC Power Circuits and Single-Phase AC Power Circuits, each of which has a pretest and posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed sheets may be printed, saved to a specific location, or sent via email to the instructor. Presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.


21001-E – DC and AC Power Circuits Training System - eSeries21001-F – DC and AC Power Circuits Training System - SCORM21001-G – DC and AC Power Circuits Training System - Stand-Alone



Windows® 8.


7 © Festo Didactic

•••

••••

Grid-Tie Training System - eSeries 583450 (46546-E0)

This site-license course is intended to be used in conjunction with the Grid-Tie Training System, Model 46125. It contains all the technical content and exercise procedures required to train future photovoltaic (PV) solar installers. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.


46546-E – Grid-Tie Training System - eSeries46546-F – Grid-Tie Training System - SCORM46546-G – Grid-Tie Training System - Stand-Alone

Topic Coverage

Trainer Familiarization and WiringSafety PracticesLockout/Tagout ProcedureComponents Installation and Commissioning



Windows® 8.

Nacelle Operation and Maintenance - eSeries 583451 (46547-E0)

This site-license eLearning course is intended to be used in conjunction with the Wind Turbine Nacelle Training System, Model 46122. It contains one course, which begins with a pretest and ends with a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.


© Festo Didactic 8

•••

•••••••

•••

•••


46547-E: Nacelle Operation and Maintenance - eSeries46547-F: Nacelle Operation and Maintenance - SCORM46547-G: Nacelle Operation and Maintenance - Stand-Alone

Topic Coverage

Nacelle Familiarization, Safety, and Control SystemUser Interface and Wind SimulationHub and Low-Speed ShaftGearbox, Coupling, and AlignmentBasic Hydraulic Circuit and BrakesElectrical Circuit and PanelTroubleshooting



Windows® 8.

Solar Thermal Energy Training System - eSeries 579818 (46548-E0)

This site-license eLearning course is intended to be used in conjunction with the Solar Thermal Energy Training System, Model 46121. It contains one course, which begins with a pretest and ends with a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.


46548-E – Solar Thermal Energy Training System - eSeries46548-F – Solar Thermal Energy Training System - SCORM46548-G – Solar Thermal Energy Training System - Stand-Alone

Topic Coverage

Introduction to Solar Thermal EnergySolar Thermal Energy SystemsMulti-Loop Systems


9 © Festo Didactic

•••

•••••



Windows® 8.

Pumps Training System - eSeries 583474 (46749-E0)

This site-license course bundle is intended to be used in conjunction with the Pumps Training System, Series 46106. It contains five courses, each of which has a pretest and posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.

It is important to note that if a lab wants to complete Rotary Pumps, Reciprocating Pumps, and Centrifugal Pumps they will

need to purchase additional pumps from the Optional Equipment list.


46749-E: Pumps Training System - eSeries46749-F: Pumps Training System - SCORM46749-G: Pumps Training System - Stand-Alone

Topic Coverage

Single Pump SystemsMultiple Pump SystemsRotary PumpsReciprocating PumpsCentrifugal Pumps



Windows® 8.


© Festo Didactic 10

•••

••••••••••

Piping Fundamentals - eSeries 583477 (46759-E0)

This site-license course bundle is intended to be used in conjunction with the Piping Training System, Series 46105. It contains one course of 9 exercises, with a pretest and a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.


46759-E: Piping Fundamentals - eSeries46759-F: Piping Fundamentals - SCORM46759-G: Piping Fundamentals - Stand-Alone

Topic Coverage

Installation of Metal StrutsIdentificationLayoutMeasurementCalculationCuttingReamingThreadingAssemblyThreaded, Barb, Cemented, and Flare Fittings



Windows® 8.


11 © Festo Didactic

•••

•••

•••

Industrial Wiring Training System - eSeries 583479 (46849-E0)

This site-license course bundle is to be used in conjunction with the Industrial Wiring Training System, Model 46102-2. Industrial Wiring contains two courses, each of which begins with a pretest and concludes with a posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.


46849-E: Industrial Wiring Training System - eSeries46849-F: Industrial Wiring Training System - SCORM46849-G: Industrial Wiring Training System - Stand-Alone

Topic Coverage

Enclosures and ConduitsElectrical Power DistributionElectrical Wiring


Computer RequirementsA currently available personal computer running under one of the following operating systems: Windows® 7,

Windows® 8, or Windows® 10.

Temperature Processes - eSeries 588352 (46944-E0)

This site-license course is intended to be used in conjunction with the Pressure, Flow, Level, and Temperature Process Training Systems, Series 3531. It fully covers temperature processes and is compatible with either the HART or FOUNDATION Fieldbus communication protocols. This course has four units, each of which has a pretest and a posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.


46944-E: Temperature Processes - eSeries46944-F: Temperature Processes - SCORM46944-G: Temperature Processes - Stand-Alone



••••

•••

••••

Topic Coverage

Familiarization with the Training SystemMeasurementProcess ControlHeat Exchangers and Advanced Temperature Measurement (requires an additional equipment purchase, 3531-20 Advanced Temperature and Heat Exchanger Add-on)



Windows® 8.

Pressure, Flow, and Level Processes - eSeries 588411 (46977-E0)

This site-license course is intended to be used in conjunction with the Pressure, Flow, Level, and Temperature Process Training Systems, Series 3531. It fully covers pressure, flow, and level processes and is compatible with either the HART or FOUNDATION Fieldbus communication protocols. This course has four units, each which has a pretest and a posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.


46977-E: Pressure, Flow, and Level Processes - eSeries46977-F: Pressure, Flow, and Level Processes - SCORM46977-G: Pressure, Flow, and Level Processes - Stand-Alone

Topic Coverage

Familiarization with the Instrumentation & Process Control Training SystemMeasurement – Pressure, Flow, and LevelIntroduction to Process Control – Pressure, Flow, and LevelAdvanced Process Control – Pressure, Flow, and Level (Requires the Pressure/Flow/Level Advanced Add-On, Model 3530-M)



Windows® 8.


13 © Festo Didactic

•••••

Complete FACET Module Curriculum Bundle (All 29 modules) - eSeries 585743 (94600-E0)

Model 94600 consists of the complete FACET module curriculum.


94600-E0 – Complete FACET Module Curriculum Bundle – eSeries – EN94600-E2 – Complete FACET Module Curriculum Bundle – eSeries – ES94600-F0 – Complete FACET Module Curriculum Bundle – SCORM – EN94600-G0 – Complete FACET Module Curriculum Bundle – Stand-Alone – EN94600-G2 – Complete FACET Module Curriculum Bundle – Stand-Alone – ES



Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification.

Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. © Festo Didactic Inc. 2021. All rights reserved.

Festo Didactic SE

Rechbergstrasse 373770 DenkendorfGermany

P. +49(0)711/3467-0F. +49(0)711/347-54-88500

Festo Didactic Inc.

607 Industrial Way WestEatontown, NJ 07724United States

P. +1-732-938-2000F. +1-732-774-8573

Festo Didactic Ltée/Ltd

675 rue du CarboneQuébec QC G2N 2K7Canada

P. +1-418-849-1000F. +1-418-849-1666

www.labvolt.com

www.festo-didactic.com

elearning courses 21016-00 - labvolt series by festo didactic98... · this site-license elearning...

Documents