electrical installation & relocating works-c-c _1_.pdf

7/29/2019 Electrical Installation & Relocating Works-C-C _1_.pdf

1/7

ELH ROAD & BRIDGE CONSTRUCTIONPage 1 of 7

SAFE WORK METHOD STATEMENTCONDUCTOR STRINGING

TASK: Conductor Stringing SITE: NorthWst TransitWay Project JOB NO: SY0064

CONDUCTED AT: Sunnyholt Rd Blacktown DATE: 25/10/05

INVOLVED PERSONNEL(Please Print)

Mobile Tel TITLE/POSITIONINVOLVED PERSONNEL

(Please Print)Mobile Tel TITLE/POSITION

Alan Leitch 0401 331 735 Project Manager Matt Cochrane None Electrical Technician

Gerry Edwards 0431 143 377 Site Supervisor

Alan Walker 0429 846 581 Electrical Technician

POWERSERVE WILL HAVE A FULL TIME PROJECT MANAGER ON SITE WHILE WORK IS BEING CARRIED OUT, WITH ALL RELEVANT STAFF

ALL PERSONNEL WILL MEET EACH DAY, WITH THE PROJECT MANAGER, PRIOR TO WORK COMMENCING, FOR A POWERSERVE BRIEFING

THE DAILY BRIEFING WITH THE PROJECT MANAGER WILL INCLUDE THE FOLLOWING POINTS:-

Staff completed the main Project Induction

Staff completed the Zone Induction

Attendance at the Daily Tool Box Meeting

Vehicle Inspections completed

Staff have the correct PPE

Work to be carried out that day

Plant & Equipment required that day

Queries & Concerns

Work coming up in the next few days


2/7



No.JOB PROCEDURE

(In Sequential Steps)POSSIBLE HAZARDS or

CONSEQUENCES

RiskLevel AGREED SAFETY CONTROLS

PERSON/S RESPONSIBLEFOR COMPLIANCE

1. Travel to & arrive at site

Collisions with Other Road Users 2 Licensed Drivers,

Supervisor & OperativesDirt tracks, loose surface 3 Reduced speed

Steep Grades 2 Use Low Gear or Range

Unfamiliar Conditions/Site 2 Site Inductions Supervisor & Operatives

2.Delivery of Conductors andHardware

Trip points, Uneven Ground 3Appropriate & Protective footwear Supervisor & Operatives

Stay where possible to obvious tracks.

Snake & spider bites 2Awareness of potential habitat First aid kitand trained first aiders

Moving machinery 1 Operator and personnel to be aware of allmoving parts

Cable Drums Rolling/ Crushed fingers/limbs/ equipment

1

Use of Chocks to prevent Rolling.

Sling Register and Regular Checks

Certified Doggers and Crane Drivers.

WI-013 Pendulum Crane Borer

Wearing of appropriate PPE (Hard Hatand Gloves Minimum)

Passing traffic 1Traffic management, signs/stop/go ifrequired

3.Position Cable drums instands Cable Drums Rolling/ Crushed fingers/

2Certified Doggers and Crane Drivers.WI-013 Pendulum Crane Borer

Supervisor & Operatives


3/7



No.JOB PROCEDURE

(In Sequential Steps)POSSIBLE HAZARDS or

CONSEQUENCES

RiskLevel AGREED SAFETY CONTROLS

PERSON/S RESPONSIBLEFOR COMPLIANCE

limbs/ equipment

4.Install Running Sheaves onCross- arms

Drop sheave 2

Use safety line Supervisor & Operatives

No Go zone below

Working from EWP 1 Licensed EWP Operators

Operator Fall 1 Safety Harnesses

5. Lay out conductors

Fall from moving vehicle 2

Operator in secure position on haulvehicle

Supervisor & Operatives

Constant Communication with Driver

Low speed (walking ) of hauling vehicle

Caught in rotating drum 2 Operator well clear of drum

Drum over-run 2Control drum speed with brake

Control speed of vehicle

6. Lift conductor to sheaves

Drop Conductor or Sheave 2 No Go zone below Supervisor & Operatives

Operator Fall 1Licensed EWP Operators

Safety Harnesses

7. Tension Conductors Operator Fall 1 Safety Harnesses Supervisor & Operatives

Safety line/sling 2 Certified/Tested Slings Supervisor & Operatives


4/7



RELEVANT LEGISLATION/STANDARDS/CODES OF PRACTICE(Refer to the Requirements when completing SWMS)

SPECIALISED TRAINING REQUIRED(Detail here all the Training Required by Personnel)

Regulation 2001 Workcover Crane ticket

Workcover Dogman

Workcover Construction Induction (Green Card)

Workcover EWP Ticket

Specific Site Induction

PLANT/EQUIPMENT INVOLVED(List all Major Items)

MAINTENANCE CHECKS(Detail Systems Used for Plant/Equipment Servicing & Maintenance)

Elevated Work Platform (EWP)

Crane Borer

Line Truck

Cable Drums and Stands

Crane

QUALIFICATIONS/EXPERIENCE of RESPONSIBLE PERSONNEL(All of the Following were Consulted in the Development of this SWMS)


5/7



Name Qualifications Workcover Certificate Class & No. Workcover Green Card No.

Bob Bush Mechanical Trade N/A CGI00395681SEQ1


6/7



Work Cover NSW National OH&S Certificate ClassesC1 Mobile Crane up to 100T C2 Mobile Crane up to 20 T C6 Mobile Crane up to 60TDG Dogging RA Rigging Advanced RI Rigging Intermediate RB Rigging BasicSA Scaffolding Advanced SI Scaffolding Intermediate SB Scaffolding Basic WP Elevated Work Platforms LF Forklift Trucks

Boilermaker Trade qualified metal fabricator Lineworker -- Trade Qualified Line worker

Electrician -- Trade Qualified Electrical

THIS DOCUMENT MUST BE TOOLBOXED, AGREED UPON AND SIGNED BY ALL EMPLOYEES/CONTRACTORS INVOLVED IN THE JOB PRIOR TO THECOMMENCMENT OF ANY WORK

(A Copy of the Tool Box Meeting is to be Forwarded to the Principal Contractor for Filing)

Comments: All Personnel Tool Boxed on the Job MUST Sign Below. Supervisor Must Sign and Date this Area on Completion of the Tool Box Meeting.

Supervisor:(Please Print)

Signed: Date:

ALL RISK ASSESSMENT FORMS ARE TO BE RETURNED TO THE RELEVANT SUPERVISOR FOR FILING!

All Personnel Listed & Signed Below have been Tool Boxed to the Tasks Described and Fully Understand And Agree to Comply with the Controls

Name (Please Print) Signature Name (Please Print) Signature Name (Please Print) Signature


7/7



IF IN DOUBT ASK YOUR SUPERVISOR!

electrical installation & relocating works-c-c _1_.pdf

Documents