how to use this install guide - amazon...
TRANSCRIPT
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.
WARNINGPressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced options in the Print menu.
Install your Maestro RR according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE1
2
3
SELECT VEHICLE PRINT PAGES NEEDED
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-HON01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro HO1 Installation Harness
INSTALL GUIDEACURA CSX
WITH AMP WITHOUT NAV 2006-2011Retain steeRing wheel contRols, factoRy amplifieR and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX with amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
DURING INSTALLATION
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX with amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS BEFORE INSTALLING
• To determine if the vehicle is equipped with a factory amplifi er, look at the rear deck. If there is a subwoofer present in the rear deck, the vehicle has an amplifi er. If there are only two speakers in the rear deck, it is NOT amplifi ed.
• Remove the factory radio.
STEP 1• Unbox the aftermarket radio and locate its main harness.
• Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2• Connect the white junction plug of the HO1 T-harness to
the 20 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
• Insert the RCA connectors (AUX IN) into the aftermarket radio (if equipped).
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
3
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX with amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 4
C
A FG
C
A
G
F
3
H
H
AUX INAUX IN
SUB OUTSUB OUT D
D
AUX INAUX IN
STEP 3 OBDII CONNECTOR
STEP 1
MAINHARNESS
WIRES FROMVEHICLE
HO1 T-HARNESS
FACTORY RADIO HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 2
STEP 4
STEP 5
MAESTRO RR MODULE
ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
SEE RADIOWIRE REFERENCECHART FORRADIO WIRECOLORS
CONNECTION NOT REQUIRED
WIRING DIAGRAM with an AmplifierRCA CABLES
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
N.C.N.C.
20 PIN CONNECTOR
RCA CABLES
CONNECT IF EQUIPPED
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX with amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 5
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-HON01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro HO1 Installation Harness
INSTALL GUIDEACURA CSX
WITH NAV 2006-2008Retain steeRing wheel contRols, factoRy amplifieR and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX with naV 2006-2008
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
DURING INSTALLATION
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX with naV 2006-2008
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Remove the factory radio.
• Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2• Connect the white junction plug of the HO1 T-harness to
the 22 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
• Connect the ORANGE/RED wire from the HO1 T-harness to the GREEN wire in pin 4 of the factory harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
• Insert the RCA connectors into the aftermarket radio.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX with naV 2006-2008
Automotive Data Solutions Inc. © 2017 4
54321
C
A FG
C
A
G
F
1
H
H
AUX INAUX IN
SUB OUTSUB OUT D
D
AUX INAUX IN
STEP 3 OBDII CONNECTOR
STEP 1
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
HO1 T-HARNESS
FACTORY RADIO HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 2
STEP 4
STEP 5
MAESTRO RR MODULE
ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKE
ORANGE/RED GREEN
PINK - VEHICLE SPEED
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
SEE RADIOWIRE REFERENCECHART FORRADIO WIRECOLORS
CONNECTION NOT REQUIRED
WIRING DIAGRAM with NavigationRCA CABLES
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
N.C.
22 PIN GREEN CONNECTOR
WIRE SIDE VIEW
CONNECT IF EQUIPPED
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX with naV 2006-2008
Automotive Data Solutions Inc. © 2017 5
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-HON01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro HO1 Installation Harness
INSTALL GUIDEACURA CSX
WITHOUT AMP WITHOUT NAV 2006-2011
Retain steeRing wheel contRols, factoRy amplifieR and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX without amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
DURING INSTALLATION
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX without amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS BEFORE INSTALLING
• To determine if the vehicle is equipped with a factory amplifi er, look at the rear deck. If there is a subwoofer present in the rear deck, the vehicle has an amplifi er. If there are only two speakers in the rear deck, it is NOT amplifi ed.
• Remove the factory radio.
STEP 1• Unbox the aftermarket radio and locate its main harness.
• Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2• Connect the white junction plug of the HO1 T-harness to
the 20 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
• Insert the RCA connectors (AUX IN) into the aftermarket radio (if equipped).
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
4
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX without amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 4
C
A FG
C
A
G
F
4
H
H
AUX INAUX IN
SUB OUTSUB OUT D
D
AUX INAUX IN
STEP 3 OBDII CONNECTOR
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
HO1 T-HARNESS
FACTORY RADIO HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 4
STEP 5
MAESTRO RR MODULE
ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
SEE RADIOWIRE REFERENCECHART FORRADIO WIRECOLORS
CONNECTION NOT REQUIRED
WIRING DIAGRAM without an Amplifier
N.C.N.C.
20 PIN CONNECTOR
CONNECT IF EQUIPPED
ADS-RR(SR)-HON01-DS maestro.idatalink.com
acuRa csX without amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 5
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-HON01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro HO1 Installation Harness
INSTALL GUIDEHONDA CIVIC
WITH AMP WITHOUT NAV 2006-2011Retain steeRing wheel contRols, factoRy amplifieR and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic with amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
DURING INSTALLATION
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic with amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS BEFORE INSTALLING
• To determine if the vehicle is equipped with a factory amplifi er, look at the rear deck. If there is a subwoofer present in the rear deck, the vehicle has an amplifi er. If there are only two speakers in the rear deck, it is NOT amplifi ed.
• Remove the factory radio.
STEP 1• Unbox the aftermarket radio and locate its main harness.
• Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2• Connect the white junction plug of the HO1 T-harness to
the 20 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
• Insert the RCA connectors (AUX IN) into the aftermarket radio (if equipped).
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
3
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic with amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 4
C
A FG
C
A
G
F
3
H
H
AUX INAUX IN
SUB OUTSUB OUT D
D
AUX INAUX IN
STEP 3 OBDII CONNECTOR
STEP 1
MAINHARNESS
WIRES FROMVEHICLE
HO1 T-HARNESS
FACTORY RADIO HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 2
STEP 4
STEP 5
MAESTRO RR MODULE
ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
SEE RADIOWIRE REFERENCECHART FORRADIO WIRECOLORS
CONNECTION NOT REQUIRED
WIRING DIAGRAM with an AmplifierRCA CABLES
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
N.C.N.C.
20 PIN CONNECTOR
RCA CABLES
CONNECT IF EQUIPPED
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic with amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 5
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-HON01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro HO1 Installation Harness
INSTALL GUIDEHONDA CIVIC
WITH NAV 2006-2008Retain steeRing wheel contRols, factoRy amplifieR and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic with naV 2006-2008
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
DURING INSTALLATION
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic with naV 2006-2008
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Remove the factory radio.
• Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2• Connect the white junction plug of the HO1 T-harness to
the 22 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
• Connect the ORANGE/RED wire from the HO1 T-harness to the GREEN wire in pin 4 of the factory harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
• Insert the RCA connectors into the aftermarket radio.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic with naV 2006-2008
Automotive Data Solutions Inc. © 2017 4
54321
C
A FG
C
A
G
F
1
H
H
AUX INAUX IN
SUB OUTSUB OUT D
D
AUX INAUX IN
STEP 3 OBDII CONNECTOR
STEP 1
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
HO1 T-HARNESS
FACTORY RADIO HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 2
STEP 4
STEP 5
MAESTRO RR MODULE
ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKE
ORANGE/RED GREEN
PINK - VEHICLE SPEED
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
SEE RADIOWIRE REFERENCECHART FORRADIO WIRECOLORS
CONNECTION NOT REQUIRED
WIRING DIAGRAM with NavigationRCA CABLES
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
N.C.
22 PIN GREEN CONNECTOR
WIRE SIDE VIEW
CONNECT IF EQUIPPED
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic with naV 2006-2008
Automotive Data Solutions Inc. © 2017 5
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-HON01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro HO1 Installation Harness
INSTALL GUIDEHONDA CIVIC
WITHOUT AMP WITHOUT NAV 2006-2011
Retain steeRing wheel contRols, factoRy amplifieR and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic without amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
DURING INSTALLATION
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic without amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS BEFORE INSTALLING
• To determine if the vehicle is equipped with a factory amplifi er, look at the rear deck. If there is a subwoofer present in the rear deck, the vehicle has an amplifi er. If there are only two speakers in the rear deck, it is NOT amplifi ed.
• Remove the factory radio.
STEP 1• Unbox the aftermarket radio and locate its main harness.
• Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2• Connect the white junction plug of the HO1 T-harness to
the 20 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
• Insert the RCA connectors (AUX IN) into the aftermarket radio (if equipped).
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
4
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic without amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 4
C
A FG
C
A
G
F
4
H
H
AUX INAUX IN
SUB OUTSUB OUT D
D
AUX INAUX IN
STEP 3 OBDII CONNECTOR
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
HO1 T-HARNESS
FACTORY RADIO HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 4
STEP 5
MAESTRO RR MODULE
ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
SEE RADIOWIRE REFERENCECHART FORRADIO WIRECOLORS
CONNECTION NOT REQUIRED
WIRING DIAGRAM without an Amplifier
N.C.N.C.
20 PIN CONNECTOR
CONNECT IF EQUIPPED
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda ciVic without amp without naV 2006-2011
Automotive Data Solutions Inc. © 2017 5
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-HON01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro HO1 Installation Harness
INSTALL GUIDEHONDA CRV
WITH NAV 2007-2009Retain steeRing wheel contRols, factoRy amplifieR and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda cRV with naV 2007-2009
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
DURING INSTALLATION
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda cRV with naV 2007-2009
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Remove the factory radio.
• Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2• Connect the white junction plug of the HO1 T-harness to
the 22 pin auxiliary harness.
• Connect the factory harness to the HO1 T-harness.
• Connect the subwoofer harness to the vehicle (if equipped).
• Connect the ORANGE/RED wire from the HO1 T-harness to the GREEN wire in pin 4 of the factory harness.
STEP 3• Connect the PINK/RED wire from the HO1 T-harness to the
BLUE wire in pin 2 at the Bluetooth module, located below the radio, in the center of the dash.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
• Insert the RCA connectors into the aftermarket radio.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
2
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda cRV with naV 2007-2009
Automotive Data Solutions Inc. © 2017 4
54321
C
A FG
C
A
G
F
2
H
H
AUX INAUX IN
SUB OUTSUB OUT
D
D
AUX INAUX IN
3 4 5 61 2
17 18 19 20
7 8
21 22 15 16
11 12 13 149 10
23 24 25 26 27 28
STEP 3 BLUETOOTH UNIT UNDER RADIO
PINK/RED - SWI 2PINK/RED - SWI 2
CONNECT IF THE VEHICLE IS EQUIPPED WITH BLUETOOTH.
STEP 4 OBDII CONNECTOR
STEP 1
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
HO1 T-HARNESS
FACTORY RADIO HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 2
STEP 5
STEP 6
MAESTRO RR MODULE
ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKE
ORANGE/RED GREEN
PINK - VEHICLE SPEED
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
SEE RADIOWIRE REFERENCECHART FORRADIO WIRECOLORS
CONNECTION NOT REQUIRED
WIRING DIAGRAM with NavigationRCA CABLES
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
22 PIN GREEN
CONNECT IF EQUIPPED WITH SUBWOOFER
WIRE SIDE VIEW
INSULATE WIRE (CONNECTOR SIDE)
CONNECT IF EQUIPPED
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda cRV with naV 2007-2009
Automotive Data Solutions Inc. © 2017 5
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-HON01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro HO1 Installation Harness
INSTALL GUIDEHONDA CRV
WITHOUT NAV 2007-2011Retain steeRing wheel contRols, factoRy amplifieR and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda cRV without naV 2007-2011
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware and that you carefully review the Installation Diagram and Vehicle Wire Refer-ence Chart.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
DURING INSTALLATION
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda cRV without naV 2007-2011
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Remove the factory radio.
• Make the connections shown on the wiring diagram from the aftermarket radio main harness to the HO1 T-harness and match the wire functions.
STEP 2• Connect the white junction plug of the HO1 T-harness to
the 20 pin auxiliary harness. Connect the factory harness to the HO1 T-harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
• Insert the RCA connectors (AUX IN) into the aftermarket radio (if equipped).
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
5
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda cRV without naV 2007-2011
Automotive Data Solutions Inc. © 2017 4
C
A FG
C
A
G
F
5
H
H
AUX INAUX IN
SUB OUTSUB OUT D
D
AUX INAUX IN
STEP 3 OBDII CONNECTOR
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
HO1 T-HARNESS
FACTORY RADIO HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 4
STEP 5
MAESTRO RR MODULE
ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
SEE RADIOWIRE REFERENCECHART FORRADIO WIRECOLORS
CONNECTION NOT REQUIRED
WIRING DIAGRAM without an Amplifier
N.C.N.C.
20 PIN CONNECTOR
CONNECT IF EQUIPPED
ADS-RR(SR)-HON01-DS maestro.idatalink.com
honda cRV without naV 2007-2011
Automotive Data Solutions Inc. © 2017 5
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable
Illumination (+) Orange N/A Orange/White Orange/White
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green
Foot Brake (+) Yellow/Black Yellow/Black N/A N/A
VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink