indraprastha gas limtied corrigendum no. i … i_ec14514.pdf · 27 laying-4c x 10/6/4 sqmm cu cable...

Sale of Bid document - 05.09.2017 to 03.10.2017

Bid Submission date and time - 04.10.2017 till 1430 hrs IST at

IGL's Office

Un-priced bid Opening date and time - 04.10.2017 at 1500 hrs IST

at IGL's Office

2

63 / Section V-

Schedule of

Rates

Schedule of Rates and Items

DescriptionsModification

Revised Schedule of Rates and Items Descriptions is attached with

this corrigendum.

Details of Bid Documents / Sale

of Bid document, Bid Submission

date and time & Un-Priced bid

Opening date and time

6 / Section-I-IFB1 6.0 Amendment

INDRAPRASTHA GAS LIMTIED

Amendment/Additional/Modification/Deletion

CORRIGENDUM NO. I

TENDER DOCUMENT NO. IGL/ND/C&P/EC14514

FOR RATE CONTRACT FOR ELECTRICAL WORKS FOR INSTALLATION OF 600/1200/2400 SCMH MOTORIZED COMPRESSORS AND ELECTRICAL

MODIFICATION WORKS AT CNG STATIONS IN REWARI FOR A PERIOD OF TWO YEARS

Tender Page No.

/ SectionClause No.S.No. Clause Description

S. No. Item Description UOM Quantity

Unit Rate (INR)

Exclusive

Taxes

Total Amount

(INR) Exclusive

Taxes

1 SUPL/LAYING-3.5CX120SQMM CU CABLE M 180


3 SUPL/LAYING-4CX50SQMM CU CABLE M 300




7 SUPL/LAYING-4CX2.5SQMM CU CABLE M 5200




11PROVID/FIXING/LAYING-ALUMINIUM 300

MM2M 60

12 SUPL/LAYING-3.5CX185 SQMM AL CABLE M 120

13 PROVIDING/FIXING-19X1.5 MM2 CABLE M 700


15PROV/FIXING-26X0.75 MM2 SHIELDED

CABLEM 1100

16SUPL/LAYING-1CX1.5SQMM FLEXIBLE

CABLEM 400

17SUPL/LAYING-1CX2.5SQMM FLEXIBLE

CABLEM 400

18 DISMANTLING-EQUIPMENT UPTO 500KG SK 8

19 DISMANTLING-EQUIPMENT <=501-1000 KG SK 8

20 ERECTION-EQUIPMENT UPTO 500KG SK 8

21 ERECTION-EQUIPMENT<=501-1000KG SK 8

22 LAYING-3.5CX300CSQMM AL CABLE M 300

23 LAYING-3.5CX185SQMM AL/CU CABLE M 300


25 LAYING-4CX50SQMM AL/CU CABLE M 300

26 LAYING-4CX35/25/16 SQMM AL/CU CABLE M 300

27 LAYING-4C X 10/6/4 SQMM CU CABLE M 300

28 LAYING-7CX2.5SQMM M 300

29 LAYING-7C/4C/3C/2CX1.5 SQMM CU CABLE M 300

30SUPL/INSTL-CAPACITOR BANKS UPTO 150

KVARKVR 200

31SUPL/FIXING-FLPGLAND OF SIZES UPTO

1"SK 140

32SUPL/FIXING-FLP GLAND OF SIZES UPTO

1-2"SK 100

33SUPL/FIXING-FLP GLAND OF SIZES

ABOVE 2"SK 80

34SUPL/FIXING-WP GLAND OF SIZES UPTO

1"SK 140

35SUPL/FIXING-WP GLAND OF SIZES UPTO 1-

2"SK 100

36SUPL/FIXING-WP GLAND OF SIZES ABOVE

2"SK 80

37 TERMINATION3.5X300 SQMM AL CABLE SK 24

SCHEDULE OF RATES


Unit Rate (INR)

Exclusive

Taxes

Total Amount

(INR) Exclusive

Taxes

38TERMINATION-3.5CX185 SQMMAL/ CU

CABLEM 24

39TERMINATION-3.5CX150 SQMM AL/ CU

CABLEM 12

40TERMINATION-3.5CX120 SQMM AL/ CU

CABLEM 12

41TERMINATION-3.5CX95SQMM AL/ CU

CABLEM 12


CABLEM 12

43TERMINATION-4CX50SQMM AL/ CU

CABLEM 12

44TERMINATION-4CX35/25/16SQMM AL/CU

CABLEM 64

45 TERMINATION-4CX10/6/4SQMM CU CABLE M 12

46TERMINATION-7/4/3/2CX2.5/1.5 SQMM CU

CABLEM 120

47 SUPL/INSTL-CEILINGFAN SK 8

48 SUPL/INSTL EXHAUST FAN 12" 1400 RPM SK 6

49 SUPL/INSTL EXHAUST FAN 18" 1400 RPM SK 12

50SUPL/FIXING-15A PLUG/SOCKET & S/W-

MKMAKESK 8

51 SUPL/INSTL-250W HPMV FLP FITTING SK 16

52FAB/ERECT-STATION YARD LIGHTING

POLESK 4

53 DISMANTLING-STATION LIGHTING POLE SK 4

54 SUPL/INSTL-1X40W LIGHTING FIXTURE SK 4

55SUPL/INSTL-2X40W LIGHTING FIXTURE

HPFSK 4

56 SUPL/INSTL-40WX1200MM FTL SK 4

57 SUPL/LAYING-GI EARTH STRIP 25X3MM M 2000



60 S/F COPPER EARTHING NO 24

61 SUPL/INSTL-PVC PIPE OF SIZE <= 1" M 40

62 SUPL/INSTL-PVC PIPEOFSIZE > 1"-2" M 40

63 SUPL/INSTL-FLEXIBLE CONDUIT SIZE 1" M 40

64 SUPL/INSTL-GI CONDUIT OF SIZE <= 2" M 40

65 SUPL/INSTL-GI CONDUIT OF SIZE >2"-4" M 40

66 SUPL/INSTL-GI/PVCPIPEOFSIZE > 4"- 6" M 20

67FAB/ERECT-LADDER CABLE TRAY W >300-

600MMM 160

68FAB/ERECT-LADDER CABLE TRAY W <=

300MMM 120

69 SUPL/FIXING-250WATTHPMVLAMP SK 16

70 SUPL/FIXING-CHOKE FOR 250W HPMV SK 16

71 SUPL/LAYING-ELECTROMATS-3MM M 40

72SUPPLY/INSTAL/TEST-LIGHTING

DB_OUTDOORNO 4

73SUPPLY/INSTAL/TEST-

LIGHTINGDB_INDOORNO 4


LIGHTINGDB_POWER PT NO 6


Unit Rate (INR)

Exclusive

Taxes

Total Amount

(INR) Exclusive

Taxes

75 SUPL/INSTL-UPS DISTRIBUTION PANEL SK 12

76SUPL/INSTL-

STEELENCLMCCB250A,415V,4PSK 4

77SUPL/INSTL-ST ENCL MCCB 125A,415V,4P

TPNSK 4

78SUPL/INSTL-

COSWITCH250A/415V/4PONLOADSK 4

79 REMOVING&RELAYING OF CABLES M 400

80FAB/ERECT-

JB/SHEETSTEELENCL/SUPPORTKG 160

81FAB/ERECT-SHEET STEEL CANOPY 2 MM

THKM2 160

82FAB/ERECT-STEEL SUPPORT-LIGHT

FIXTUREKG 80

83 SUPL/FIXING-63A,TP&N,MCB SK 12

84 SUPL/FIXING-16A,TP&N MCB SK 8

85 SUPL/FIXING-6A,DP,MCB SK 40

86SUPL/INSTL-DOL OUTDOOR-3PH UPTO

7.5HP MOTSK 4

87SUPL/INSTL-1" WIDE HDPE CASING FOR

WIRINGM 40

88 SUPL/INSTL-FLP & WP 4 WAY JB IN LM-6 SK 12

89 SUPL/INSTL-WP 4WAY JB IN LM-6 SK 8

90LOADING/UNLOADING/SHIFTING OF

PANELNO 4

91SUPPLY & FIXING OF STAR DELTA

STARTER UPNO 6

92 SUPL/LAYING-3.5CX120SQMMALCABLE M 60






98DISMANTLING-EQUIPMENT<=1001-2000

KGSK 4

99 ERECTION-EQUIPMENT <=1001-2000 KG SK 4

100 PROVIDING/FIXING-3MCCB PANNEL. NO 6

101 PROVIDING/FIXING-MCCB 630AMP, 4 POLE NO 6

102PROVIDING/FIXING-CAPACITOR BANK 80

KVAR.NO 6

103 PROVIDING/FIXING-GLAND185MM2. NO 12

104 PROVIDING/FIXING-GLAND300MM2. NO 12

105PROV/FIXING-LUGS IN CABLE

CONNECTIONS 300NO 60






CONNECTIONS 95NO 60

109 SUPL/FIXING-4P MCCB UPTO 100A SK 6

110 SUPL/FIXING-32A,DP, MCB SK 8

111 SUPL/FIXING-32A,SP, MCB SK 8


Unit Rate (INR)

Exclusive

Taxes

Total Amount

(INR) Exclusive

Taxes

112 SUPL/INSTL-EXHAUST FAN 1440 RPM SK 4

113 SUPL/INSTL-18 WAY MCB BOX SK 4

114SUPL/FIXING-5APLUG/SOCKET&S/W-MK

MAKESK 16

115 SUPL/FIXING-20/40W CU CHOKE OF FTL SK 4

116SUPPL/INSTAL/TEST-POWER PLUG

SKT_ACNO 8


SKT_MMINO 6

118CHANGE-ONLOAD PHASE CHANGE

OVER630AMPSNO 6

119DEMOLITION-PCC WORK BELOW PLINTH

LEVELM3 30

120 PROV/LAYING-PCC 1:2:4 FOR ALL DEPTHS M3 30

121 CONST-EARTHING PIT SK 16

122 SUPL/LAYING-4CX35 SQMM AL CABLE M 40

123DEMOLITION-RCC WORK BELOW PLINTH

LEVELM3 40

124 SUPL/LAYING OF PROFI BUS CABLE M 200

125SUP/INSTALLATION OF 400A MCCB WITH

STEELSK 6

126 SUPL/LAYING 4" ARMORED FLEXIBLE PIPE M 40

127SUPL/LAYING 3"ARMORED FLEXIBLE

CONDUITM 40

128SUPL/LAYING 1.5MMSQ X 24 CORE

SHEILDEDM 200

129SUPL/INSTOF 2 QUADRANT ENERGY

METERSK 4

130 SUPPL/INST OF 80W LED CANOPY LIGHT SK 8

131 SUPPL/INST OF 80W LED STREET LIGHT SK 8

132SUPPL/INST-TWIN LED TUB ELIGHT

BATTENSK 8

133SUPP/INST-SINGLE LED TUBE LIGHT

BATTENSK 8

134SUPPL/INST OF 20W RETROFIT LED

TUBELIGHSK 40

135SUPL/INST OF ANALOG/DIGITAL

VOLTMETERSK 4

136SUPL/INST-ANALOG/DIGITAL AMMETER;

RA 630A SK 6

137SUPL/INST-ANALOG/DIGITAL AMMTR; RA

400ASK 6

138SUPL/INST-ANALOG/DIGITALAMMTR; RA

250ASK 4

139SUPL/INST-DIGITAL MULTIFUNCTION

METER SK 4

140 SUPL/INST OF INDICATION LAMP SK 16

141SUPL/LAYING-

1CX16SQMMFLEXIBLECABLEM 40

142SUPL/LAYING 1CX10 MMSQ FLEXIBLE

CABEM 40

143SUPL/INST-1'X1'HINGE TYPE EARTH PIT

COVERSK 16


Unit Rate (INR)

Exclusive

Taxes

Total Amount

(INR) Exclusive

Taxes

144SUPL/INST-2'X2'HINGE TYPE EARTH PIT

COVERSK 16

145 INSTALLATION-ALUMINIUM CABLE TAGS SK 200

146 SUPL/FIXING-AMMETER0-100A,96X96MM SK 6



149 SUPL/LAYING-1X12pair ESCS CU CABLE M 40

150 SUPL/LAYING-1X16pair ESCS CU CABLE M 40

151 SUPL/LAYING-1.5X6pair ESCS CU CABLE M 40

Total Amount (Figures) exclusive of taxes

GST @ …………….%

Total Amount (Figures) inclusive of GST

Total Amount (Words) inclusive of GST

S. No. Item Description UOM Quantity Detailed Description

1SUPL/LAYING-3.5CX120SQMM CU

CABLEM 180

Supply and laying of 3.5C x 120 sq.mm Cu. conductor

cable PVC insulated, PVC sheathed, 1100V Grade,

Armoured cables (of sizes mentioned below) of Make

Cable Corporation of India, Universal Cables, Nicco

Cables, Cords, and Polycab, conforming to IS 1554 in

ready made trenches, overhead/trench cable trays, in

loose excavated soil, through PVC/G.I. conduits in/on

the ground/wall/false ceiling/roof etc.


CABLEM 180









3SUPL/LAYING-4CX50SQMM CU

CABLEM 300

Supply and laying of 4C x 50 sq.mm Cu. conductor cable

PVC insulated, PVC sheathed, 1100V Grade, Armoured

cables (of sizes mentioned below) of Make Cable

Corporation of India, Universal Cables, Nicco Cables,

Cords, and Polycab, conforming to IS 1554 in ready

made trenches, overhead/trench cable trays, in loose

excavated soil, through PVC/G.I. conduits in/on the

ground/wall/false ceiling/roof etc.


CABLEM 640










CABLEM 640


PVC insulated, PVC sheathed,1100V Grade, Armoured


Corporationof India, Universal Cables, Nicco Cables,

Cords, and Polycab, conforming to IS 1554in ready


excavated soil,through PVC/G.I. conduits in/on the






Corporationof India, Universal Cables, Nicco Cables,

Cords, and Polycab, conforming to IS 1554in ready




7SUPL/LAYING-4CX2.5SQMM CU

CABLEM 5200

Supply and laying of 4C x 2.5 sq.mm Cu. conductor

cable PVC insulated, PVCsheathed, 1100V Grade,


CableCorporation of India, Universal Cables, Nicco

Cables, Cords, Rallison and Polycab,conforming to IS

1554 in ready made trenches, overhead/trench cable

trays, in looseexcavated soil, through PVC/G.I. conduits

in/on the ground/wall/false ceiling/roofetc.

ITEM DESCRIPTIONS



CABLEM 300





Cables, Cords, and Polycab,conforming to IS 1554 in


looseexcavated soil, through PVC/G.I. conduits in/on the

ground/wall/false ceiling/roofetc.


CABLEM 300




Grandly,Cable Corporation of India, Universal Cables,

Nicco Cables, Cords, and Polycab,conforming to IS

1554 in ready made trenches, overhead/trench cable

trays, in looseexcavated soil, through PVC/G.I. conduits

in/on the ground/wall/false ceiling/roofetc.


CABLEM 300









11PROVID/FIXING/LAYING-ALUMINIUM

300 MM2M 60

Providing, laying & fixing 300 mm2 aluminum with

material.

12SUPL/LAYING-3.5CX185 SQMM AL

CABLEM 120

Supply and laying of 3.5C x 185 sq.mm Al. conductor








13PROVIDING/FIXING-19X1.5 MM2

CABLE M 700 Providing & fixing 19 X 1.5 mm2 cable.


CABLEM 700 Providing & fixing 14 X 1.5 mm2 cable.

15PROV/FIXING-26X0.75 MM2

SHIELDED CABLEM 1100

Providing & fixing 26 X 0.75 mm2 shielded armoured

cable.

16SUPL/LAYING-1CX1.5SQMM

FLEXIBLE CABLEM 400

Supply and laying of Single core, 1.5 mm2 sized,

Unsheathed, Flexible, CopperConductor Wire / cable as

per IS ? 694 Special Purpose, PVC Insulated, Low

TensionCables of make Finolex / Phonix / Polycab /

Unistar or equivalent make subject toprior approval from

IGL and including the supply of the required materials

such ascopper cable lugs for termination of the cable.

17SUPL/LAYING-1CX2.5SQMM

FLEXIBLE CABLEM 400

Supply and laying of Single core, 2.5 mm2 sized,

Unsheathed, Flexible, CopperConductor Wire / cable as

per IS ? 694 Special Purpose, PVC Insulated, Low

TensionCables of make Finolex / Phonix / Polycab /

Unistar or equivalent make subject toprior approval from


such ascopper cable lugs for termination of the cable.


18DISMANTLING-EQUIPMENT UPTO

500KGSK 8

Dismantling including disconnection & deglanding of all

the incoming / outgoing feeder cables of Switch boards /

Power / Lighting Distribution Boards / Panels /UPS

Power Distribution Boards / Panels / Change Over

Switches with enclosures /Change Over Fuse Switch

Units with enclosures / Fuse Switch Units with

enclosures /UPS Power Systems with battery back up,

etc. up to and including 500 Kg weight and transporting

the same to IGL Ware House or to any CNG Station

premises of IGL anywhere in Delhi. The job shall be

complete in all respects including the cost ofall

materials, tools, labour, etc. as per this technical

specification, applicabledrawings, Special Terms &

Conditions of this tender and as per directions of IGL

‘sEngineer In Charge.

19DISMANTLING-EQUIPMENT <=501-

1000 KGSK 8








etc. 501-1000 Kg weight and transportingthe same to

IGL Ware House or to any CNG Station premises of IGL

anywhere in Delhi.The job shall be complete in all

respects including the cost of all materials,tools, labour,

etc. as per this technical specification, applicable

drawings,Special Terms & Conditions of this tender and

as per directions of IGL ‘s Engineer In Charge.

20 ERECTION-EQUIPMENT UPTO 500KG SK 8 #N/A

21ERECTION-EQUIPMENT<=501-

1000KGSK 8

Erection, Testing and Commissioning (excluding

glanding and termination of all the incoming / outgoing

feeder cables) of IGL Supplied Switch boards / Power

/Lighting Distribution Boards / Panels / UPS Power

Distribution Boards / Panels /Change Over Switches with

enclosures / Change Over Fuse Switch Units

withenclosures / Fuse Switch Units with enclosures /

UPS Power Systems with batteryback up, etc. of 501-

1000 Kg weight. The job shall be complete in all

respects including the cost of all materials, tools, labour,


drawings, Special Terms & Conditions of this tender

andas per directions of IGL ‘s Engineer In Charge.


22 LAYING-3.5CX300CSQMM AL CABLE M 300

Laying (horizontally and vertically), testing and

commissioning of 3.5C x 300 sq.mmAl. / Cu conductor


Armoured cables(of sizes mentioned below) of Make

Cable Corporation of India, Universal Cables,Nicco


ready made trenches,overhead/trench cable trays, in

loose excavated soil, through PVC/G.I. conduitsin/on the

ground/wall/false ceiling/roof etc. The job also includes

transportation of the cables from IGL Warehouse or from

any CNG Station of IGL in Delhi to theplace of

installation. The Contractor, shall, after completion of the

cable layingjob return the balance quantity of cables to

IGL Warehouse, with the cables neatlycoiled on the

drums and sealed properly with PVC caps and tagged

properly indicating balance length, size etc. The item

rated for this job does not include cable glanding and

termination, construction of trenches and supply &

installationof cabling accessories . However, the job

includes clamping & dressing of the cables including the

supply of necessary G.I. Clamps. Megger Testing of

cablesincluding arranging the Megger before

commissioning of the cables. The job shall be complete

in all respects including the cost of tools, labour, etc. as

per this technical specification, applicable drawings,

Special Terms & Conditions of this tender and as per

directions of IGL #s Engineer In Charge.

23LAYING-3.5CX185SQMM AL/CU

CABLEM 300










transportationof the cables from IGL Warehouse or from






properlyindicating balance length, size etc. The item

rated for this job does not includecable glanding and



includes clamping & dressing of thecables including the



commissioning of the cables. The job shall becomplete


per thistechnical specification, applicable drawings,

Special Terms & Conditions of thistender and as per

directions of IGL ‘s Engineer In Charge.





cablePVC insulated, PVC sheathed, 1100V Grade,

























25 LAYING-4CX50SQMM AL/CU CABLE M 300


commissioning of 4C x 50 sq.mmAl. / Cu conductor











cable laying job return the balance quantity of cables to




rated for this job does not include cable glanding and





cables including arranging the Megger before







26LAYING-4CX35/25/16 SQMM AL/CU

CABLEM 300


commissioning of 4C x 35 / 25 /16 sq.mm Al. / Cu

conductor cable PVC insulated, PVC sheathed, 1100V

Grade,Armoured cables (of sizes mentioned below) of

Make Cable Corporation of India,Universal Cables,

Nicco Cables, Cords, and Polycab, conforming to IS

1554 in readymade trenches, overhead/trench cable

trays, in loose excavated soil, throughPVC/G.I. conduits

in/on the ground/wall/false ceiling/roof etc. The job also

includes transportation of the cables from IGL

Warehouse or from any CNG Stationof IGL in Delhi to

the place of installation. The Contractor, shall, after

completion of the cable laying job return the balance

quantity of cables to IGLWarehouse, with the cables

neatly coiled on the drums and sealed properly with PVC

caps and tagged properly indicating balance length, size

etc. The item rated forthis job does not include cable

glanding and termination, construction of trenches and

supply & installation of cabling accessories . However,

the job includes clamping & dressing of the cables

including the supply of necessary G.I. Clamps.Megger

Testing of cables including arranging the Megger before

commissioning of thecables. The job shall be complete

in all respects including the cost of tools,labour, etc. as


SpecialTerms & Conditions of this tender and as per

directions of IGL ‘s Engineer In charge

27 LAYING-4C X 10/6/4 SQMM CU CABLE M 300


commissioning of 4C x 10 / 6 / 4sq.mm Cu. conductor











cable laying job return the balance quantity of cables to

IGL Warehouse, with the cables neatly coiled on the


properly indicating balance length, size etc. The item






cables including arranging the Megger before







28 LAYING-7CX2.5SQMM M 300


commissioning of 7C x 2.5 sq.mmCu. conductor cable


cables (ofsizes mentioned below) of Make Cable

Corporation of India, Universal Cables, NiccoCables,


made trenches,overhead/trench cable trays, in loose

excavated soil, through PVC/G.I. conduitsin/on the




















29LAYING-7C/4C/3C/2CX1.5 SQMM CU

CABLEM 300


commissioning of 7C / 4C / 3C / 2C x 2.5 / 1.5 sq.mm

Cu. conductor cablePVC insulated, PVC sheathed,

1100V Grade, Armoured cables (of sizes mentioned

below) of Make Cable Corporation of India, Universal

Cables, Nicco Cables, Cords, and Polycab, conforming

to IS 1554 in ready made trenches, overhead/trench

cable trays, in loose excavated soil, through PVC/G.I.

conduits in/on the ground/wall/false ceiling/roof etc. The

job also includes transportation of the cables from IGL

Warehouse or from any CNG Station of IGL in Delhi to

the place of installation. The Contractor, shall, after

completion of the cable laying job return the balance

quantity of cables to IGL Warehouse, with the cables

neatly coiled on the drums and sealed properly with PVC

caps and tagged properly indicating balance length, size

etc. The item rated for this job does not include cable

glanding and termination, construction of trenches and

supply & installation of cabling accessories . However,

the job includes clamping & dressing of the cables

including the supply of necessary G.I. Clamps. Megger

Testing of cables including arranging the Megger before

commissioning of the cables. The job shall be complete





30SUPL/INSTL-CAPACITOR BANKS

UPTO 150 KVARKVR 200

Supply and Installation of Capacitor Banks of the ratings

up to and including 150KVAR and of Make L&T /

ALSTOM / Asian / Madhav / Khatau Junker in the

existing Capacitor Bank Panels.


31SUPL/FIXING-FLPGLAND OF SIZES

UPTO 1"SK 140

Supplying and fixing of flame proof Double compression

Cable glands for cable entries of sizes up to and

including 1 Inch (ET) . The cable glands shall be of

make Baliga/FCG/Ex-Protecta / CEAG Control gear /

Sudhir Switchgear only and conforming to IS 2148. The

cable glands shall be certified OK by Chief Controller of

Explosives (CCOE), Nagpur / CMRI.


UPTO 1-2"SK 100


Cable glands for cableentries of sizes above 1 Inch (ET)

upto and including 2 Inch (ET) . The cable glands shall

be of make Baliga/FCG/Ex-Protecta / CEAG Control

gear / Sudhir Switchgear only and conforming to IS

2148. The cable glands shall be certified OKby Chief

Controller of Explosives (CCOE), Nagpur / CMRI.


ABOVE 2"SK 80


cable glands for cable entries of any size above 2 Inch

(ET) . The cable glands shall be of makeBaliga/FCG/Ex-

Protecta / CEAG Control gear / Sudhir Switch gear only

and conforming to IS 2148. The cable glands shall be

certified OK by Chief Controller of Explosives (CCOE),

Nagpur / CMRI.

34SUPL/FIXING-WP GLAND OF SIZES

UPTO 1"SK 140

Supplying and fixing weather proof, double compression

Cable glands for cable entries of sizes up to and

including 1 Inch (ET) and conforming to IS 2148.

Thecable glands shall be of make Comet / Baliga / FCG

/ Ex-Protecta / CEAG Controlgear/ Sudhir Switchgear

only.


UPTO 1-2"SK 100


Cable glands for cable entries of sizes above 1 Inch (ET)

upto and including 2 Inch (ET) and conformingto IS

2148. The cable glands shall be of make Comet / Baliga

/ FCG / Ex-Protecta /CEAG Control gear/ Sudhir

Switchgear only.


ABOVE 2"SK 80


cable glands for cable entries of any size above 2 Inch

(ET) and conforming to IS 2148. The cableglands shall

be of make Comet / Baliga / FCG / Ex-Protecta / CEAG

Control gear/Sudhir Switchgear only.

37TERMINATION3.5X300 SQMM AL

CABLESK 24

Termination of PVC insulated, PVC sheathed, 1100V

grade armoured , 3.5C x 300 sq.mm Al. / Cu conductor

cable including cable glanding, including stripping of

cable,crimping of lug and bolting to terminals etc. This

includes supply of Dowell#s make heavy duty, long

barrel, solderless, crimping type, tinned

copper/Aluminium lugs(as per requirement & directions

of IGL Engineer In Charge), and any other material such

as crimping paste, etc. as required at Site for proper

finish of cabletermination. The item rate for this job does

not include the cost of supply of cable glands. The job

shall be complete in all respects including the cost of

allmaterials, tools, labour, etc. as per this technical

specification, applicable drawings, Special Terms &

Conditions of this tender and as per directions of IGL #s

Engineer In Charge.


38TERMINATION-3.5CX185 SQMMAL/

CU CABLEM 24





includes supply of Dowell’s make heavy duty, long





finish of cable termination. The item rate for this job does

not include the cost of supply ofcable glands. The job

shall be complete in all respects including the cost of all



Conditions of this tender and as per directions of IGL ‘s

Engineer In Charge.

39TERMINATION-3.5CX150 SQMM AL/

CU CABLEM 12
















Engineer In Charge.

40TERMINATION-3.5CX120 SQMM AL/

CU CABLEM 12


grade armoured , 3.5C x 120sq.mm Al. / Cu conductor

cableincluding cable glanding, including stripping

ofcable, crimping of lug and bolting to terminals etc. This



copper/Aluminium lugs (as per requirement & directions

of IGL Engineer In Charge),and any other material such

as crimping paste, etc. as required at Site for

properfinish of cable termination. The item rate for this

job does not include the cost of supply of cable glands.

The job shall be complete in all respects including the

cost of all materials, tools, labour, etc. as per this

technical specification,applicable drawings, Special

Terms & Conditions of this tender and as per directions

of IGL ‘s Engineer In Charge.


CABLEM 12


grade armoured , 3.5 C x 95 sq.mm Al. / Cu conductor


cable, crimping of lug and bolting to terminals etc. This












Engineer In Charge.



CABLEM 12
















Engineer In Charge.

43TERMINATION-4CX50SQMM AL/ CU

CABLEM 12


grade armoured , 4C x 50 sq.mm Al. / Cu conductor














Engineer In Charge.

44TERMINATION-4CX35/25/16SQMM

AL/CU CABLEM 64


grade armoured , 4C x 35 / 25 / 16 sq.mm Al. / Cu

conductor cable including cable glanding, including

stripping of cable, crimping of lug and bolting to

terminals etc. This includes supply of Dowell’s make

heavy duty, long barrel, solderless, crimping type, tinned










Engineer In Charge.

45TERMINATION-4CX10/6/4SQMM CU

CABLEM 12


grade armoured , 4C x 10 / 6 / 4sq.mm Cu. conductor












specification, applicabledrawings, Special Terms &


Engineer In Charge.


46TERMINATION-7/4/3/2CX2.5/1.5 SQMM

CU CABLEM 120


grade armoured , 7C / 4C / 3C /2C x 2.5 / 1.5 sq.mm Cu.

conductor cable including cable glanding, including

stripping of cable, crimping of lug and bolting to

terminals etc. This includes supply of Dowell’s make

heavy duty, long barrel, solderless, crimping type,

tinnedcopper/Aluminium lugs (as per requirement &

directions of IGL Engineer In Charge),and any other

material such as crimping paste, etc. as required at Site

for proper finish of cable termination. The item rate for

this job does not include the costof supply of cable

glands. The job shall be complete in all respects

including thecost of all materials, tools, labour, etc. as

per this technical specification,applicable drawings,

Special Terms & Conditions of this tender and as

perdirections of IGL ‘s Engineer In Charge.

47 SUPL/INSTL-CEILINGFAN SK 8

Supply, Installation and commissioning of 1400 mm

sweep 240V, 50 Hz, ceiling fan of Crompton / Bajaj /

Orient or any other make subject to prior approval of IGL

including fan hook suspension rod 300 mm long

connections, earthing, electronic dimmer type regulator,

etc. complete. The job shall be complete in all respects

including the cost of all materials, tools, labour, etc. as




48SUPL/INSTL EXHAUST FAN 12" 1400

RPMSK 6

Supply, Installation and commissioning of Exhaust Fan

of Crompton / Bajaj / Alstom/ GEC or any other make

subject to prior approval of IGL and of 12'', 1400

RPM,suitable for use on 240V, 50 Hz, Single Phase with

frame gravity drop louvers,clamps, etc. complete as

required 300 sweep size. The job shall be complete in

allrespects including the cost of all materials, tools,

labour, etc. as per thistechnical specification, applicable

drawings, Special Terms & Conditions of this tender and

as per directions of IGL #s Engineer In Charge.

49SUPL/INSTL EXHAUST FAN 18" 1400

RPMSK 12



subject to prior approval of IGL and of 18'', 1400

RPM,suitable for use on 240V, 50 Hz, Single Phase with

frame gravity drop louvers,clamps, etc. complete as

required 300 sweep size. The job shall be complete in all


etc. as per thistechnical specification, applicable


as per directions of IGL #s Engineer In Charge.

50SUPL/FIXING-15A PLUG/SOCKET &

S/W-MKMAKESK 8

Providing and fixing 15A plug point and 5A Cum 15A,

three pin plate socket outlet with 15A switch of MK /

Schnider Make and earthing the third pin with 8 SWG

Copper earth wire connections, etc. complete and

carrying out wiring with 4 mm2 sized, Flexible, Single

Core, PVC Insulated, 650V grade, copper conductor,

wires in heavy duty ISI 20 mm PVC conduit pipe on

existing tray / on walls / Floorcomplete. The job shall be

complete in all respects including the cost of all




Engineer In Charge.


51SUPL/INSTL-250W HPMV FLP

FITTINGSK 16

Supply, Installation, and Commissioning of 250 watt

HPMV well glass Flameproof Light Fitting of Philips/

Wipro / Bajaj / Crompton / Osram make including

providing and fixing tubes / lamps , chokes, starters,

earthing connections and mounting arrangements, etc

as required . The job shall be complete in all respects


per this technical specification,applicable drawings,


directions of IGL Site Engineer.

52FAB/ERECT-STATION YARD

LIGHTING POLESK 4

Fabrication, Supply / delivery & erection / installation at

Site of Station Yard Lighting Pole as per Site

requirement. This item rate shall not include the cost of

civil foundation require for the erection of the Pole. The

job shall be complete in all respects including the cost of

all materials, tools, labour, etc.as per this technical



Engineer In Charge.

53DISMANTLING-STATION LIGHTING

POLE SK 4

Disconnection and Dismantling of the existing Station

Yard Lighting Pole and its transportation to IGL ware

House or to any CNG Station of IGL anywhere in

Delhi.Ladder, if required for the job, shall be arranged by

the Contractor only.The job shall be complete in all

respects including the cost of all materials, tools,labour,



as per directions of IGL Site Engineer.

54SUPL/INSTL-1X40W LIGHTING

FIXTURESK 4

Supply, Installation, and Commissioning of 1 X 40W of

Philips/ Wipro / Bajaj / Crompton / Osram make

including providing and fixing tubes / lamps , chokes,

starters, earthing connections and mounting

arrangements, etc as required . The job shall be





Site Engineer.

55SUPL/INSTL-2X40W LIGHTING

FIXTURE HPFSK 4

Supply, Installation, and Commissioning of 2 X 40W of

Philips/ Wipro / Bajaj /Crompton / Osram make including

providing and fixing tubes / lamps , chokes,starters,

earthing connections and mounting arrangements, etc

as required . The job shall be complete in all respects

including the cost of all materials, tools,labour, etc. as


SpecialTerms & Conditions of this tender and as per

directions of IGL Site Engineer.

56 SUPL/INSTL-40WX1200MM FTL SK 4

Supply, Installation, and Commissioning of 1200 mm X

40 Watts fluorescent tube light Fixture on building of

Philips/ Wipro / Bajaj / Crompton / Osram make

including providing and fixing tubes / lamps , chokes,

starters, earthing connections and mounting

arrangements, etc as required . The job shall be





Site Engineer.


57SUPL/LAYING-GI EARTH STRIP

25X3MMM 2000

Supply & Laying of G.I. Earthing Strip of the 25 mm X 3

mm, clamped to wall /structure including jointing (by

welding only) and termination at the required points by

welding only, including supply of all the required

materials. The welded area shall be painted using

Burger Make Lacoloid paint. The job shall be complete in

all respects including the cost of all materials, tools,

labour, etc. as per this technical specification, applicable




40X5MMM 120


mm, clamped to wall /structure including jointing (by




Burger Make Lacoloid paint. The job shall becomplete in


labour, etc.as per this technical specification, applicable




25X5MMM 400


mm , clamped to wall /structure including jointing (by




Burger Make Lacoloid paint. The job shall be complete in


labour, etc.as per this technical specification, applicable



60 S/F COPPER EARTHING NO 24

SUPPLY, BURRYING, CONNECTING AND TESTING

OF TINNED COPPER PLATE ELECTRODE WITH

NECESSARY ACCESSORIES AND PROVIDING

HINGED COVER MANHOLE WITH LOCKING

ARRANGEMENT. 20MM DIA GI WATERING PIPE

WITH FUNNEL ETC. COMPLETE IN ALL RESPECTS.

THE PLATE TOBE BURRIED WITH ITS TOP EDGE AT

A DEPTH NOT LESS THAN 3500 MM FROM THE

SURFACE OF THE GROUND AND AT LEAST 2000

MM AWAY FROM THE BUILDING FOUNDATION I/C

PACKING OF CHARCOAL POWDER AND SALT AS

PER IS-3043 TILL DATE. 600X600X6MM TINNED

COPPER

61 SUPL/INSTL-PVC PIPE OF SIZE <= 1" M 40

Supply & Installation of Heavy Duty PVC Pipes of sizes

up to and including 1 Inch for mechanical protection of

the under ground cables. The job shall be complete inall





62 SUPL/INSTL-PVC PIPEOFSIZE > 1"-2" M 40

Supply & Installation of Heavy Duty PVC Pipes of sizes

above 1 Inch and upto and including 2 Inch for

mechanical protection of the under ground cables. The


all materials, tools,labour, etc. as per this technical



Engineer In charge.


63SUPL/INSTL-FLEXIBLE CONDUIT SIZE

1"M 40

Supply & Installation of Flexible Conduit of size upto and

including 1 Inch for mechanical protection of the under

ground cables. The job shall be complete in all respects




directions of IGL's Engineer In Charge.

64SUPL/INSTL-GI CONDUIT OF SIZE <=

2"M 40

Supply and installation of G.I. Conduits of sizes up to

and including 2 Inch for mechanical protection of the

under ground cables rising from the trench / crossingthe

mechanical / process pipelines, etc . The job shall be





Engineer In Charge.

65SUPL/INSTL-GI CONDUIT OF SIZE >2"-

4"M 40

Supply and installation of G.I. Conduits of sizes above 2

Inch and up to and including 4 Inch for mechanical

protection of the under ground cables rising from the

trench / crossing the mechanical / process pipelines, etc

. The job shall be complete in all respects including the

cost of all materials, tools, labour, etc.as per this

technical specification, applicable drawings, Special


of IGL ‘s Engineer In Charge.

66SUPL/INSTL-GI/PVCPIPEOFSIZE > 4"-

6"M 20

Supply and installation of G.I. Conduits PVC Pipes of

sizes above 4 Inch and up to and including 6 Inch for

mechanical protection of the under ground cables rising

from the trench / crossing the mechanical / process

pipelines, etc . The job shall be complete in all respects

including the cost of all materials, tools, labour,etc. as




67FAB/ERECT-LADDER CABLE TRAY W

>300-600MMM 160

Design, Fabrication, Supply & Installation of Ladder

Type, G.I. Cable Trays of width above 300 mm and up to

& including 600 mm . The job includes supply &

installation of cable tray accessories such as horizontal

& vertical bends, elbows and structural steel supports /

brackets for installation of the trays cable tray ,etc. The


all materials,tools, labour, etc. as per this technical

specification, applicable drawings,Special Terms &


EngineerIn Charge.

68FAB/ERECT-LADDER CABLE TRAY W

<= 300MMM 120

Design, Fabrication, Supply & Installation of Ladder

Type, G.I. Cable trays of width up to and including 300

mm . The job includes supply & installation of cabletray

accessories such as horizontal & vertical bends, elbows

and structural steel supports / brackets for installation of

the trays cable tray , etc. The job shall be complete in all

respects including the cost of all materials, tools,

labour,etc. as per this technical specification, applicable




69 SUPL/FIXING-250WATTHPMVLAMP SK 16

Supplying & fitting 250 Watt HPMV Lamp of approved

make like Philips, Bajaj,Crompton, Oshram and any

other* make (subject to prior approval of IGL) and

suitable for operation on 1 Phase, 240V, 50 Hz, AC

supply. The job shall be complete in all respects

including the cost of all materials, tools, labour, etc.as




70SUPL/FIXING-CHOKE FOR 250W

HPMVSK 16

Supplying & fitting Choke for 250 Watt HPMV Lighting

Fixture of approved make like Philips, Bajaj, Crompton,

Oshram and any other* make (subject to prior approval

ofIGL) and suitable for operation on 1 Phase, 240V, 50

Hz, AC supply. The job shall be complete in all respects



Special Terms &Conditions of this tender and as per


71 SUPL/LAYING-ELECTROMATS-3MM M 40SUPL/LAYING-ELECTROMATS, Class 'C', thickness 3

mm, width 1000 mm confirming to IS: 15652/2006

72SUPPLY/INSTAL/TEST-LIGHTING

DB_OUTDOORNO 4

Supply, Installation, testing and commissioning of wall

mounted lighting DB, double door Construction,

Constructed with 2 mm sheet steel enclosure along with

a housing to mount the entire board. With required

hardware, making connections including providing cable

glands, lugs, earthing & painting etc. Arrangement for

termination of cables/wires including three phase and

neutral bus bars etc. complete in all respects.For Out

Door Lighting) Incomer -1 No. 63 amps, fuse switch unit,

outgoings connected through a 40 amps TP contractor

and 24 hours dual/ multiple setting synchronous timer

with battery backup, 63 A copper bus bars alonwith auto/

manual selector switch and ON/OFF push

buttons.Outgoings-3 Nos. 16/25/32/amps TPN MCBs, 03

Nos 16 amps SPN MCBs (through contractor") & 02

Nos. 16/25/32 amps TPN MCBs, 03 nos. 16 SPN MCBs

(Direct without contractor)


LIGHTINGDB_INDOORNO 4








neutral bus bars etc. complete in all respects. For Indoor

Lighting, Incomer- 63 amps, 4P, ELCB: outgoing: 6

amps SP MCB-09 Nos.


LIGHTINGDB_POWER PT NO 6








neutral bus bars etc. complete in all respects. Incomer:

63 amps 4P, Outgoing: 20amps SPMCB-03 Nos. and 16

A SP MCB-06 Nos.


75SUPL/INSTL-UPS DISTRIBUTION

PANELSK 12

UPS Distribution Board. Design, supply, installation,

testing & commissioning of Electrical (UPS) distribution

panel as per specifications & single line diagrams

including transportation to site at the place of installation,

proper storage, unpacking, assembly of sections,

mounting and qiring of loose accessories supplied by the

eqipment vendor etc., installation on foundations or

fixing to wall, aligning, leveling, testing, calibration of

meters and all other accessories. including all labour

and materials as per specifictions of this tender and

directions of Engineer-In-Charge

76SUPL/INSTL-

STEELENCLMCCB250A,415V,4PSK 4

250A, 415V, 4- Pole Design, Supply, installation, testing

& commissioning of sheet steel enclosed MCCB of

following rating as per technical specifications of this

tender and directions of Engineer-in-Charge( all MCCBs

shall be of 35 kA rating and shall be mounted on

wall/structure on a steel bracket assembly made of

painted MS structural steel)

77SUPL/INSTL-ST ENCL MCCB

125A,415V,4P TPNSK 4

125A, 415V, TPN, 4-Pole Design, Supply, installation,

testing & commissioning of sheet steel enclosed MCCB

of following rating as per technical specifications of this

tender and directions of Engineer-in-Charge( all MCCBs

shall be of 35 kA rating and shall be mounted on

wall/structure on a steel bracket assembly made of

painted MS structural steel)

78SUPL/INSTL-

COSWITCH250A/415V/4PONLOADSK 4

250A, 415V, 4P, On-load, AC23. Supply, installation,

testing and commisioning of change over switch along

with its cable boxes in sheet steel enclosed construction

79 REMOVING&RELAYING OF CABLES M 400

Removing of cables (from one station) and relaying (at

the same or another station)of Cu. /Al. conductor cable


cables from trenches, cable trays /loose excavated soil,

through PVC/G.I./CEMENT conduits in/on the

ground/wall/false ceiling/roof etc.Work includes

removing of cables without damaging overall system,

from GI conduits,cable trays, etc and relaying it in

conduits, cable trays , glands, termination,testing,

commissioning, transportation and connections including

all labour and materials as per the electrical industry

standard specifications & specifications of this tender

and directions of the engineer-in-charge.

80FAB/ERECT-

JB/SHEETSTEELENCL/SUPPORTKG 160

Design, Fabrication, Manufacture and erection of

Junction Boxes / Sheet Steel Enclosures / MS base

frames, Structural Steel Supports for Main Power

Distribution Switch boards / Panels, Main / Sub Lighting

Distribution Boards / Panels, Switchgear such as

Moulded Case Circuit Breaker, Fuse switch Unit,

Change Over switch,etc., Lighting Fixtures / Fittings,

Junction Boxes ,Choke Boxes, Metal clad, Plug Sockets

etc. Junction Boxes / Sheet Steel Enclosures shall be

made up of 14 SWGSheet Steel and Structural Supports

/ Base Frames shall be made out of MS

angles,channels, flats etc supplied by the contractor only

including cutting to length,drilling holes, welding, bolting,

including application of one coat of anti rust primer after

cleaning thoroughly and two finishing coats of epoxy

based enamel paint.


81FAB/ERECT-SHEET STEEL CANOPY

2 MM THKM2 160

Design, Fabrication, Supply and installation of 2mm thick

sheet steel canopy for monsoon protection of static /

outdoor equipment such as switch boards,

starters,Automatic Voltage Regulators, etc. Contractor

shall get the canopy design approved by IGL Engineer In

Charge before fabrication of the canopy. The job shall be


materials, tools, labour, etc.as per this technical



Engineer In Charge.

82FAB/ERECT-STEEL SUPPORT-LIGHT

FIXTUREKG 80

Fabrication, Supply / delivery & erection / installation at

Site of structural steel support for lighting fixture as per

Site requirement. This item rate shall not include the cost

required for the erection of the Pole. The job shall be


materials, tools, labour, etc.as per this technical



Engineer In Charge.

83 SUPL/FIXING-63A,TP&N,MCB SK 12

Supply and fixing of MCBs of 63A, TP&N MCB, 10 KA,

suitable for operation on 3-Phase (4 Wire), 415V, 50 Hz

System. Make of the MCBs shall be Siemens / L&T

/Indocop / MDS / Schneider as per the directions of the

Site Engineer.

84 SUPL/FIXING-16A,TP&N MCB SK 8

Supply and fixing of MCBs of 16A, TP&N MCB, 10 KA,

suitable for operation on 3Phase (4 Wire), 415V, 50 Hz

System. Make of the MCBs shall be Siemens / L&T

/Indocop / MDS / Schneider as per the directions of the

Site Engineer.

85 SUPL/FIXING-6A,DP,MCB SK 40

Supply and fixing of MCBs of 6A, DP, MCB, 10 KA, G-

Series suitable for operation on 1 Phase (2 Wire), 240V,

50 Hz System. Make of the MCBs shall be Siemens /

L&T /Indocop / MDS / Schneider as per the directions of

the Site Engineer.

86SUPL/INSTL-DOL OUTDOOR-3PH

UPTO 7.5HP MOTSK 4

Supply and fixing of An outdoor type fo 3 Phase, 415V,

50 Hz up to and including 7.5hp Induction Motors Direct

On Line (DOL) Starter suitable for starting of Industrial

Type, Squirrel cage Induction Motors of below

mentioned capacity. The starter shall comprise

contactor, bi-metallic over load relay with built in

SPP(incase of 3 Phase) where required, terminals as

required for power and control cable termination, start

push button . stop push button, wiring as required to

make thestarter fully operational, etc. complete in all

respects. The starter shall be of Make L&T / Siemens /

Controls & switch gear / Schneider Electric only.

87SUPL/INSTL-1" WIDE HDPE CASING

FOR WIRINGM 40

Supply & Installation of 1 Inch wide HDPE (High Density

Poly Ethylene) casing withcover, bends, T – Joints for

wiring below the false ceiling / surface wiring onwalls

inside various rooms. This item rate shall include the

cost of supply &fixing of G.I. Hardware, G.I. Sleeve at

wall crossing, chipping / breaking of brick/ RCC Wall &

re plastering to original finish. Ladder, if required for the

job,shall be arranged by the Contractor only. The job





Engineer In Charge.


88SUPL/INSTL-FLP & WP 4 WAY JB IN

LM-6SK 12

Supply & installation of Flame Proof & Weather Proof in

material LM-6, 4 Way Junction Boxes approved by Chief

Controller of Explosives, Nagpur / CMRI. The JBs shall

be of make Baliga / FCG / Ex-Protecta / CEAG Control

gear / Sudhir Switchgear. JBs shall be provided with 04

Nos. 0.75 Inch sized cable entries(electrical threaded)

suitable for glanding of 4C X 2.5 mm2, 1.1KV Grade,

Type AYFY or YFY cable. The job shall be complete in

all respects including the cost of all materials, structural

supports, tools, labour, etc. as per this technical


Conditions of this tender andas per directions of IGL ‘s

Engineer In Charge.

89 SUPL/INSTL-WP 4WAY JB IN LM-6 SK 8

Supply & installation of Weather Proof in material LM-6 4

Way Junction Boxes. The JBs shall be of make Baliga /

FCG / Ex-Protecta / CEAG Control gear / Sudhir

Switchgear. JBs shall beprovided with 04 Nos. 0.75 Inch

sized cable entries (electrical threaded)suitable for

glanding of 4C X 2.5 mm2, 1.1KV Grade, Type AYFY or

YFY cable. The job shall be complete in all respects

including the cost of all materials, structural supports,

tools, labour, etc. as per this technical specification,

applicable drawings, Special Terms & Conditions of this

tender and as per directions of IGL ‘sEngineer In

Charge.

90LOADING/UNLOADING/SHIFTING OF

PANELNO 4

LOADING / UNLOADING/ SHIFTING OF PANEL UP TO

1000KG including disconnection & deglanding of all the

incoming / outgoing feeder cables of Switch boards /

Power /Lighting Distribution Boards / Panels /UPS

Power Distribution Boards / Panels /Change Over


Units with enclosures/ Fuse Switch Units with enclosures

/UPS Power Systems with battery back up, etc.upto

1000 Kg weight and transporting the same to IGL Ware

House or to any CNG Station premises of IGL anywhere

in Delhi. The job shall be complete in allrespects




directions of IGL #s Engineer In Charge.

91SUPPLY & FIXING OF STAR DELTA

STARTER UPNO 6

SUPPLY & FIXING OF STAR DELTA STARTER UP TO

13 HP. Starter suitable for starting of Industrial Type,

Squirrel cage Induction Motors of mentioned capacity.

The starter shall comprise contactors, over load relay

with built in SPP (incase of 3 Phase),terminals as

required for power and control cable termination, start

push button .stop push button, wiring as required to

make the starter fully operational, etc.complete in all

respects. The starter shall be of Make L&T / Siemens /

Controls & switch gear / Schneider Electric only.

92SUPL/LAYING-

3.5CX120SQMMALCABLEM 60










CABLEM 160

Providing & fixing 12 X 1.5 mm2 cable (For 24V DC

intrinsically, digital cables).



CABLEM 120








the ground/wall/false ceiling/roofetc.


CABLEM 120










CABLEM 20


















98DISMANTLING-EQUIPMENT<=1001-

2000 KGSK 4








etc. 1001-2000 Kg weight and transporting the same to

IGL Ware House or to any CNG Station premises of IGL

anywhere in Delhi.The job shall be complete in all

respects including the cost of all materials,tools, labour,


drawings,Special Terms & Conditions of this tender and


99ERECTION-EQUIPMENT <=1001-2000

KGSK 4

Erection, Testing and Commissioning (excluding

glanding and termination of all the incoming / outgoing

feeder cables) of IGL Supplied Switch boards / Power

/Lighting Distribution Boards / Panels / UPS Power

Distribution Boards / Panels /Change Over Switches with

enclosures / Change Over Fuse Switch Units with

enclosures / Fuse Switch Units with enclosures / UPS

Power Systems with battery back up, etc. of 1001-2000

Kg weight. The job shall be complete in all

respectsincluding the cost of all materials, tools, labour,

etc. as per this technicalspecification, applicable



100 PROVIDING/FIXING-3MCCB PANNEL. NO 6Providing & fixing 3 MCCB panel with 1 no. 400 amp

mccb X 2 no. 250 amp mccb.

101PROVIDING/FIXING-MCCB 630AMP, 4

POLENO 6

Providing & fixing MCCB panel having capacity 630

amp.

102PROVIDING/FIXING-CAPACITOR

BANK 80 KVAR.NO 6 Providing & fixing capacitor bank 80 kvar.


103 PROVIDING/FIXING-GLAND185MM2. NO 12Providing & fixing gland 185 mm2 commet make double

compression.

104 PROVIDING/FIXING-GLAND300MM2. NO 12Providing & fixing gland 300 mm2 commet make double

compression.


CONNECTIONS 300NO 60 Providing & fixing lugs in cable connections 300 mm.







109 SUPL/FIXING-4P MCCB UPTO 100A SK 6

Supply and fixing of Motor Duty, 4 Pole, Moulded Case

Circuit Breakers (MCCBs) of rating up to & including

100A and having short circuit withstanding capacity

of16KA / 20KA / 35 KA/ 50KA as per the directions of

Site Engineer and suitable for operation on 3 Phase (4

Wire), 415V, 50 Hz system. MCCBs shall be of Make

Siemens /GE Power Controls / L&T as per the directions

of Site Engineer.

110 SUPL/FIXING-32A,DP, MCB SK 8

Supply and fixing of MCBs of 32A, DP, MCB, 10 KA, G-

Series suitable for operation on 1 Phase (2 Wire), 240V,



the Site Engineer.

111 SUPL/FIXING-32A,SP, MCB SK 8

Supply and fixing of MCBs of 32A, SP, MCB, 10 KA, G-

Series suitable for operationon 1 Phase (2 Wire), 240V,



the Site Engineer.

112 SUPL/INSTL-EXHAUST FAN 1440 RPM SK 4



subject to prior approval of IGL and of 1440 RPM,

suitable for use on 240V, 50 Hz, Single Phase with

frame gravity drop louvers, clamps, etc. complete as

required 300 sweep size. The job shall be complete in all





113 SUPL/INSTL-18 WAY MCB BOX SK 4

Supply & Installation of 18 Way MCB Enclosure / Box,

16 Gauge MS Painted Sheet with hinged covers of MDS

/ Havells Make including making electrical

connections,testing, commissioning complete ; this item

rate shall not include the cost of MCBsto be housed in

the Enclosure / Box. The job shall be complete in all





114SUPL/FIXING-5APLUG/SOCKET&S/W-

MK MAKESK 16

Providing and fixing 5A plug point and 5A, three pin plate

socket outlet with 5A switch of MK/ Schnider make and

earthing the third pin with 8 SWG Copper earth wire

connections, etc. complete and carrying out wiring with

flexible, Single Core, PVC Insulated Copper Conductor

of Size 2.5 mm2, 650V Grade, ISI wires in heavy duty ISI

20 mm PVC conduit laid in existing tray / on wall / floor

complete. The job shallbe complete in all respects


per this technical specification, applicable drawings ,




115SUPL/FIXING-20/40W CU CHOKE OF

FTLSK 4

Supplying & fitting 20 / 40 Watt Copper Choke of BIS

Stds. For fluorescent tube ofapproved make like Philips,

Bajaj, Crompton, Oshram and any other* make (subject

toprior approval of IGL) and suitable for operation on 1

Phase, 240V, 50 Hz, AC supply. The job shall be

complete in all respects including the cost of




Engineer In Charge.


SKT_ACNO 8

Supply, installation, testing & commissioning of Building

Lighting and Power Plug Socket including concealed

point wiring with heavy duty PVC conduit earth wire, on /

off switches etc. as required..20 Amp 3 Pin Industrial

type socket with 20 Amp. SP MCB sheet steel enclosure

with 4 sq. mm Cu. Conductor PVC insulated point wiring

for air conditioner.


SKT_MMINO 6

Supply, installation, testing & commissioning of Building

Lighting and Power Plug Socket including concealed

point wiring with heavy duty PVC conduit earth wire, on /

off switchesMMI Room/ Office - FCS 31/211 make

Philips or equivalent.

118CHANGE-ONLOAD PHASE CHANGE

OVER630AMPSNO 6

On load phase change over switches along with its

cables box in sheet steel enclosed construction of make

L&T/ Havells / HPL. (A) 630

AMPS, 415V, 3P,Onload, AC23

119DEMOLITION-PCC WORK BELOW

PLINTH LEVELM3 30

Demolishing PLAIN CEMENT CONCRETE (PCC) work

(taking all neccesssary safety precautions) for all depths

below plinth level including supply of all tools & tackles,

necessary scaffolding, propping, underpinning etc. ,

disposal of unserviceable material outside the IGL

boundary limits keeping IGL indemnified of any liabilities

from statutory / local bodies, all complete as specified &

directed. (Excavation & Backfilling shall be paid

separately under relevant items).

120PROV/LAYING-PCC 1:2:4 FOR ALL

DEPTHSM3 30

Providing and laying Plain cement Concrete for all

depths below and up to plinth level in foundations,

drains, fillings, non suspended floors, pavementsand

ramps or any other works etc. including shuttering,

tamping,ramming,vibrating, curing etc. all as specified, in

any shape , position, thickness and finishing the top

surface rough or smooth as specified and directed, all

complete for concrete of nominal mix 1:2:4 by mass (1

cement:2 coarse sand:4 crushed stone

aggregates/gravels) with 20mm down size graded

crushed stone aggregates/ gravels. ALL MATERIALS

INCLUDING CEMENT SUPPLIED BY THE

CONTRACTOR


121 CONST-EARTHING PIT SK 16

Construction of Earthing Pit including carrying out

necessary excavation & backfilling , providing necessary

watering arrangement for the pit, providing necessary

charcoal, salt dust, etc. and providing a proper Earth Pit

Cover made upof RCC as per the latest version of IS:

3043 using 100 mm dia G.I. Pipe including supply of all

the earthing materials required as per IS : 3043 for the

purpose of grounding the body of all electrical equipment

such as Main Power Distribution Boards,Motors,

Automatic Voltage Regulators, Lighting Panels, etc. or

for the purpose of grounding of the neutral of DG Sets or

for the purpose of electronic grounding of

instrumentation Systems such PLC Control Panels for

Gas Engine driven Compressors, Metering Skids, UPS

Systems, Gas Dispensing Units, etc. Earth Pit

Resistance shall be measured , recorded and submitted

to IGL Engineer In Charge forreference & records.

Mobilization of Earth Test Megger for measurement of

earth PIT Resistance is the responsibility of the

Contractor. The Earth Pit Cover shall be painted as

follows for identification purpose. The job shall be


materials, tools, labour, etc. as per thistechnical



Engineer In Charge.

122SUPL/LAYING-4CX35 SQMM AL

CABLEM 40

Supply and laying of 4C x 35 sq.mm Al. conductor cable




Cords, and Polycab,conforming to IS 1554 in ready




123DEMOLITION-RCC WORK BELOW

PLINTH LEVELM3 40

Demolishing RCC work (taking all neccesssary safety

precautions) for all depths below plinth level including

supply of all tools & tackles, necessary scaffolding,

propping, underpinning etc. , cutting, straightening,

scraping & cleaning of reinforcement bars, stacking of

serviceable material, disposal of unserviceable material

outside the IGL boundary limits keeping IGL indemnified

of any liabilities from statutory / local bodies, all complete

as specified & directed. (Excavation & Backfilling shall

be paid separately under relevant items).

124 SUPL/LAYING OF PROFI BUS CABLE M 200

Supl/ laying of profibus cable should be of Siemens

make having Part no. 6XV18300EH10. The job shall be


materials, tools, labour, etc. Supl/Laying includes laying

in ready made trenches, overhead/trench cable trays, in



125SUP/INSTALLATION OF 400A MCCB

WITH STEELSK 6

Supply, installation, testing & commissioning of sheet

steel enclosed MCCB of rating 400A, 415V, 4- Pole as

per technical specifications of this tender and directions

of Engineer-in-Charge( all MCCBs shall be of 35 kA

rating and shall be mounted on wall/structure on a steel

bracket assembly made of painted MS structural steel)

126SUPL/LAYING 4" ARMORED FLEXIBLE

PIPEM 40

Supply & Installation of Flexible armored Conduit of size

4" Inch for mechanical protection of the cables. Flexible

pipe must consist of armored wire inside the conduit.


cost of all materials, tools, labour, etc.


127SUPL/LAYING 3"ARMORED FLEXIBLE

CONDUITM 40

Supply & Installation of Flexible armored Conduit of size

3" Inch for mechanical protection of the cables. Flexible

pipe must consist of armored wire inside the conduit.


cost of all materials, tools, labour, etc.

128SUPL/LAYING 1.5MMSQ X 24 CORE

SHEILDEDM 200

Providing & fixing 24 X 1.5 mm2 shielded armoured

cable. Cable should be shielded with combination of

both foil and braid shields. The job shall be complete in


labour, etc. Supl/Laying includes laying in ready made

trenches, overhead/trench cable trays, in loose



129SUPL/INSTOF 2 QUADRANT ENERGY

METERSK 4

Supl/ Installation of 2 quadrant energy meter consists of

installation of energy meter in panel. Meter must consists

of parameters such as : Voltage, Current, Frequency,

Power factor, KWH, KVAH etc. Meter should not work at

capacitive load. Meter should have dimensions as 96mm

X 96 mm. Enegry meter make should be make Siemens

/ L&T / AE / KAY CEE / Concore / Havells / Alstom/

Rishabh or any other Make approved by Power

Distribution Companies BSES / NDPL (Tata Power) /

NDMC as directed by Site In charge. The job shall be

complete in all respects including the cost of tools,

labour, etc. as per this technical specification, applicable


as per directions of IGL ‘s Engineer In Charge. Job

consists of wiring of Energy meter.

130SUPPL/INST OF 80W LED CANOPY

LIGHTSK 8

Supply and Installation of 80W LED canopy light should

have System lumens efficacy i.e. Lumens/watts > 120.

Make: Havells, Model: Canopy 80W LED. Light should

have Extruded aluminium housing with elegantly

designed heat sink for efficient thermal management,

sturdiness & excellent corrosion resistant. Light should

by one on one replacement of 250 W HPMV lamp type

canopy llight conventional fittings.Light Should have

Power factor > 0.9. Light Nominal voltage should be

240V. Light should be Suitable for pole mounting with

bracket arm OD .Light Should have In-built electronic

driver with two output channels each with APFC and

THD<33%, Output Short circuit protection,Surge voltage

protection and other reliability tests as per IS:15885

part2/ section 13 . Light fitting should have suitable

arrangement for cable termination with gland opening of

suitable size. Installation consists of wiring of light from

existing cable and successfully start up of light.

Installation also consists of removal of existing light

packing of removed light and handing over to concerned

department. No additional tranportation will be paid for

the same. Light Should be designed for IP65. Techanical

drawing is as enclosed as Appendix 'iii'


131SUPPL/INST OF 80W LED STREET

LIGHTSK 8

Supply and Installation of 80W LED Street light should

have System lumens efficacy i.e. Lumens/watt s > 80.

Make: Havells, Model: Endura Cityliner Neo. Light

should by one on one replacement of 250 W HPMV

lamp type conventional street light fittings.Light Should

have Power factor > 0.9. Light Nominal voltage should

be 240V. Light should be Suitable for pole mounting with

bracket arm OD .Light Should have In-built electronic

driver with APFC and THD<15%. Light fitting should

have suitable arrangement for cable termination with

gland opening of suitable size. Installation consists of

wiring of light from existing cable and successfully start

up of light. Installation also consists of removal of

existing light packing of removed light and handing over

to concerned department. No additional tranportation will

be paid for the same. Light Should be designed for IP66

protection.Techanical drawing is as enclosed as

Appendix 'iv'

132SUPPL/INST-TWIN LED TUB ELIGHT

BATTENSK 8

Supply and Installation of twin LED light Batten suitable

for two LED tube lights. Batten should have mounting On

ceiling/ wall with screws at a distance of 930 mm,

suspend by 2 nos. Ø19 mm conduit pipe at a distance of

600 mm. Installation consists of wiring of light from

existing cable and successfully start up of light.

Installation also consists of removal of existing light,


department. No additional tranportation or charges will

be paid for the same.

133SUPP/INST-SINGLE LED TUBE LIGHT

BATTENSK 8

Supply and Installation of Single LED light Batten .

Batten should have mounting On ceiling/ wall with

screws at a distance of 900 mm, suspend by 2 nos. Ø19

mm conduit pipe at a distance of 600 mm or with chains

at a distance of 700 mm. Installation consists of wiring of

light from existing cable and successfully start up of light.

Installation also consists of removal of existing light,


department. No additional tranportation or charges will

be paid for the same.

134SUPPL/INST OF 20W RETROFIT LED

TUBELIGHSK 40

Supply and Installation of LED Tube Retrofit 20W having

System lumens range from 1900-2600 lumens. Make:

havells. Light should be one on one replacement 36W

conventional tube light. Tube Light Should have Power

factor > 0.9. Light Nominal voltage should be 240V.

Installation also consists of removal of existing light


department. No additional tranportation will be paid for

the same.

135SUPL/INST OF ANALOG/DIGITAL

VOLTMETERSK 4

Sup/Installation of Analog/ Digital Voltmeter consists of

mouting of Voltmeter in panel and wiring for the same as

per directions of engineer. Voltmeter rating should be 0-

500V. Voltmeter dimensions should be 96 mmX 96 mm.

Voltmeter make should be make Siemens / L&T / AE /

KAY CEE / Concore / Havells / Alstom/ Rishabh or any

other Make approved by Power Distribution Companies

BSES / NDPL (Tata Power) / NDMC as directed by Site

In charge. The job shall be complete in all respects

including the cost of tools, labour, etc. as per this



of IGL ‘s Engineer In Charge. Job consists of wiring of

Voltmeter.


136SUPL/INST-ANALOG/DIGITAL

AMMETER; RA 630A SK 6

Sup/Installation of Analog/ Digital Ammeter consists of

mouting of Ammeter in panel and wiring for the same as

per directions of engineer. Ammeter rating should be 0-

630A. Ammeter dimensions should be 96 mmX 96 mm.

Ammeter make should be make Siemens / L&T / AE /









Ammeter.

137SUPL/INST-ANALOG/DIGITAL AMMTR;

RA 400ASK 6














Ammeter.

138SUPL/INST-ANALOG/DIGITALAMMTR;

RA 250ASK 4














Ammeter.

139SUPL/INST-DIGITAL MULTIFUNCTION

METER SK 4

Sup/Installation of Digital Multifunction meter consists of

mouting of meter in panel and wiring for the same as per

directions of engineer. Meter dimensions should be 96

mmX 96 mm. Meter make should be make Siemens /

L&T / AE / KAY CEE / Concore / Havells / Alstom or any








Multifunction meter.

140 SUPL/INST OF INDICATION LAMP SK 16

Supplying and fixing of Indicating lamps transformer type

with slide fuses of make Siemens / L&T / AE / KAY CEE

/ Concore / Havells / Alstom or any other Make approved

by Power Distribution Companies BSES / NDPL (Tata

Power) / NDMC as directed by Site In charge.


141SUPL/LAYING-

1CX16SQMMFLEXIBLECABLEM 40

Supply and laying of Single core, 16 mm2 sized,

Unsheathed, Flexible, Copper Conductor Wire / cable as

per IS # 694 Special Purpose, PVC Insulated, Low

Tension Cables of make Finolex / Phonix / Polycab /

Unistar or equivalent make subject to prior approval from


such as copper cable lugs for termination of the cable.

142SUPL/LAYING 1CX10 MMSQ

FLEXIBLE CABEM 40

Supply and laying of Single core, 10 mm2 sized,

Unsheathed, Flexible, Copper Conductor Wire / cable as

per IS – 694 Special Purpose, PVC Insulated, Low

Tension Cables of make Finolex / Phonix / Polycab /

Unistar or equivalent make subject to prior approval from


such as copper cable lugs for termination of the cable.

143SUPL/INST-1'X1'HINGE TYPE EARTH

PIT COVERSK 16

Supl/ Installation and of 1'X1' hinge type earth pit covers

for earthing pits. Installation consists of removal of

earlier cemented covers. Supl/ Installation also consists

of Painting and marking of covers. The job shall be


labour, etc.

144SUPL/INST-2'X2'HINGE TYPE EARTH

PIT COVERSK 16

Supl/ Installation and of 2'X2' hinge type earth pit covers

for earthing pits. Installation consists of removal of

earlier cemented covers. Supl/ Installation also consists

of Painting and marking of covers. The job shall be


labour, etc.

145INSTALLATION-ALUMINIUM CABLE

TAGSSK 200

Supply & Installation of Aluminium Cable Tags indicating

Cable Tag No., Equipment being fed, Cable Size,

Source of Power, etc. as directed by IGL Engineer In

Charge.

146SUPL/FIXING-AMMETER0-

100A,96X96MMSK 6

Fixing, connecting, testing & commissioning of 0-100A

Ammeter of size 96 mm X 96 mm and with 03 Nos. 100A

/ 1A CT & Selector of make Siemens / L&T / AE / KAY

CEE / Concore / Havells / Alstom or any other Make

approved by Power Distribution Companies BSES /

NDPL (Tata Power) / NDMC as directed by Site In

charge. The job shall be complete in all respects




of IGL #s Engineer In Charge.


CABLEM 60










CABLEM 60









149SUPL/LAYING-1X12pair ESCS CU

CABLEM 40

Providing & fixing 1 X 12 pair ESCS Cu cable. Work

includes the supply of wires, termination, testing,

commissioning and connection including all labour and

materials as per specifications of this tender and

directions of the engineer-in-charge.


150SUPL/LAYING-1X16pair ESCS CU

CABLEM 40

Providing & fixing 1 X 16 pair ESCS Cu cable. Work





151SUPL/LAYING-1.5X6pair ESCS CU

CABLEM 40

Providing & fixing 1.5 X 6 pair ESCS Cu cable. Work



