project bulletin november 2009
TRANSCRIPT
Objective:•To create an off-grid power producing device using the wind as its source of renewable energy•To make a cheap and reliable alternative to producing energy•To build an eco-friendly system for producing energy
Wind Energy HarvestingThe WIND
Wind is caused by differences in pressure. When a difference in pressure exists, the air is accelerated from higher to lower pressure. This creates kinetic energy in the atmosphere that is essential in harvesting power from the wind.
The Goal
Kinetic Energy Electrical Energyfrom Wind To power different
appliances, light, etc…
Oliver Ryan AngV – BS ECE
Steve Ryan AndalisV – BS ECE
Gazelo ArcillaV – BS ECE
John Kester BegoniaV – BS ECE
Wind Energy Harvesting
Group Wind Turbine Design
Using the fan from an aircon, the group was able to construct a vertical axis wind turbine (VAWT) that turns as wind is directed towards the fan.
Characterization
Controlled fan speed measurementTurbine speed measurementCurrent and Voltage measurement (for different motors)Gear belt tension measurementDistance of the fan and turbine
Speedometer
Tachometer
Motor
LDR SensorPlanned Addition
Concentrators – to guide the wind to get maximum rpm from the turbine
Oliver Ryan AngV – BS ECE
Steve Ryan AndalisV – BS ECE
Gazelo ArcillaV – BS ECE
John Kester BegoniaV – BS ECE
Concentrator
Wind Energy Harvesting
Impact to Society1. Rural areas may easily access electricity through the use of wind turbines
2. Additional source of energy to suffice the increasing demand of electricity3. Contribute to a “greener” planet4. Maximization of the potential of mother nature
Turbines at Work
Smart Telecom Wind Powered Cell Sites
Bangui, Ilocos Norte Windmill
provides 40 percent of the power needs in Ilocos Norte via its connection to the national grid.
U.S. $50 million investment
Oliver Ryan AngV – BS ECE
Steve Ryan AndalisV – BS ECE
Gazelo ArcillaV – BS ECE
John Kester BegoniaV – BS ECE