resume - web1.fkm.utm.myweb1.fkm.utm.my/userfiles/file/cv staf academic new...3 • name of position...

RESUME

1.0 PERSONAL DETAILS

• Name : Ariffin Abdul-Razak, Ph.D

• I/C No. : 8283717 @ 630510-71-5185

• Nationality : Malaysian

• Date of Birth : 10 of May, 1963

• Place of Birth : Singapore

• Maritial Status : Married with 6 children

• House Address : 14, Jalan Harmoni 15 Taman Desa Skudai 81300 Skudai

Johor Darul Ta’zim

• Telephone No. (H) : +607-554 8531

• Telephone No. (H/P) : +6012-748 6062

• Office Address : Faculty of Mechanical Engineering Universiti Teknologi Malaysia 81310 Skudai Johor Darul Ta’zim

• Telephone No. (O) : +607-553 4571

• Facsimile No. (O) : +607-556 6159

2

2.0 ACADEMIC QUALIFICATIONS

• Year : 1998 Name of Degree : Doctor of Philosophy (Ph.D) Specialization : Manufacturing Engineering Name of University : Heriot-Watt University Place : Scotland, United Kingdom

Title of Thesis : Detection of Feature Interactions in An Object-Oriented Feature-based Design System

• Year : 1992 Name of Degree : Master of Philosophy (M.Phil) Specialization : Manufacturing Engineering Name of University : Loughborough University of Technology Place : England, United Kingdom Title of Thesis : A Design-with-Features Approach for Rotational Machined Components

• Year : 1986 Name of Degree : Bachelor Engineering Kejuruteraan Jentera Specialization : Mechanical (Production) Engineering Name of University : Universiti Teknologi Malaysia Place : Kuala Lumpur Title of Thesis : Design of Plant Layout System for Rattan-

based Furniture

3.0 PRESENT POSITION Name of Position : Senior Lecturer Date of Appointment : 22 September, 2012

4.0 ADDITIONAL RESPONSIBILITIES

• Name of Position : Member of Evaluation Panel Division/Faculty : Malaysian Qualifications Agency (MQA) From : 12 September, 2011 Until : 11 September, 2014

• Name of Position : Member of Evaluation Panel Division/Faculty : Malaysian Qualifications Agency (MQA) From : 12 September, 2008 Until : 11 September, 2011

3

• Name of Position : GMI External Advisor for KKTM Balik Pulau Guided Project

Division/Faculty : German Malaysian Institute (GMI) From : 9 March, 2008 Until : 28 June, 2008

• Name of Position : Academic Advisor for 1SMP Students Division/Faculty : Mechanical From : July, 2005

Until : At Present

• Name of Position : Member of Final Year Project Committee Division/Faculty : Mechanical Engineering From : 1 July, 2005

Until : 30 June, 2007

• Name of Position : Acting Head of Panel Division : Manufacturing Engineering From : 18 December, 2004 Until : 26 January, 2005

• Name of Position : Member of Academic Board of Faculty Division/Faculty : Mechanical Engineering From : 18 December, 2004 Until : 26 January, 2005

• Name of Position : Member of Academic Curriculum of Faculty

Division/Faculty : Mechanical Engineering From : 18 December, 2004

Until : 26 January, 2005

• Name of Position : Member of Evaluation Panel Division/Faculty : National Board of Accreditation (LAN) From : 23 September, 2004 Until : 15 Februari, 2006

• Name of Position : Member of Academic Publication of Faculty Division/Faculty : Mechanical Engineering From : 1 May, 2004

Until : 30 April, 2006

• Name of Position : Head of Panel Division : Manufacturing Engineering From : 1 January, 2004 Until : 26 August, 2004

4

• Name of Position : Member of Academic Board of Faculty Division/Faculty : Mechanical Engineering From : 1 January, 2004 Until : 26 August, 2004


Division/Faculty : Mechanical Engineering From : 1 January, 2004 Until : 26 August, 2004

• Name of Position : Member of Evaluation Panel Division/Faculty : National Board of Accreditation (LAN) From : 24 September, 2002 Until : 23 September, 2004

• Name of Position : Head of Panel Division : Manufacturing Engineering From : 1 June, 2001 Until : 31 May, 2003

• Name of Position : Member of Academic Board of Faculty Division/Faculty : Mechanical Engineering From : 1 June, 2001 Until : 31 May, 2003


Division/Faculty : Mechanical Engineering From : 1 June, 2001 Until : 31 May, 2003

• Name of Position : Member of Academic Publication of Faculty Division/Faculty : Mechanical Engineering From : 15 March, 2001 Until : 14 March, 2003

• Name of Position : Member of Evaluation Panel Division/Faculty : National Board of Accreditation (LAN) From : 1 August, 2000 Until : 31 July, 2002

• Name of Position : Acting Head of Panel Division : Manufacturing From : 1 September, 1999

5

Until : 31 January, 2000

• Name of Position : Member of Academic Board of Faculty Division/Faculty : Mechanical From : 1 September, 1999 Until : 31 January, 2000

• Name of Position : Acting Head of Laboratory Division : Production From : 1 September, 1999 Until : 31 January, 2000

• Name of Position : Co-ordinator for FKM Division/Faculty : Program Khas Pensiswazahan Guru From : 1 November, 1999 Until : 31 April, 2000

• Name of Position : Head of Panel Division/Faculty : Panel of Production From : 1 October, 1998 Until : 15 January, 1999

• Name of Position : Academic Advisor for 1SMP Students Division/Faculty : Mechanical From : July, 1998 Until : June, 2002

• Name of Position : Member of Academic Board of Faculty Division/Faculty : Mechanical From : 1 October, 1998 Until : 15 January, 1999

• Name of Position : Head of Panel Division/Faculty : Panel of Production From : February, 1993 Until : November, 1993

• Name of Position : Head of Laboratory Division/Faculty : Metal Fabrication Lab From : 1992 Until : 1993

• Name of Position : Co-ordinator Division/Faculty : Workshop Practical Training From : 1988 Until : 1989

6

• Name of Position : Co-ordinator Amali Subjects Division/Faculty : Workshop From : 1988 Until : 1989

• Name of Position : Head of Workshop Division/Faculty : Workshop Practical Training From : 1988 Until : 1989

• Name of Position : Academic Advisor for 1SKJ Students Division/Faculty : Faculty of Mechanical From : 1987 Until : 1993

• Name of Position : Head of Laboratory Division/Faculty : Foundry From : 1987 Until : 1988 5.0 PREVIOUS EXPERIENCES 5.1 External Name of Position : Production Executive Officer Company : Pencala General Trading Sdn. Bhd. From : 1 July, 1986 Until : 30 September, 1986 5.2 Internal Name of Position : Assistant Lecturer 'A' Faculty/Division : Mechanical Engineering From : 26 December, 1986 Until : 31 December, 1991 6.0 LECTURING & SUPERVISING 6.1 Lecturing

• Session : 2013/2014

7

Semester : I Level : Master & Bachelor Engineering

Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course ii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 1 – SMI) iii. SME 3931 : Engineering Lab – Year 3

• Session : 2012/2013 Semester : II

Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) – Kuala Lumpur

ii. MMP 2663 : Advanced Manufacturing Technology (AMT) – Master by Course iii. SMR 4722 : Advanced Manufacturing Technology (AMT) – Year 4 (SMP) iv. SME 3942 : Industrial Engg. Lab. - Year 3 v. SMU 3742 : Advanced Manufacturing (AMT) – SPACE (FPPSM – JB)

• Session : 2012/2013 Semester : I

Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and

Assembly (DFMA) – Master by Course ii. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) – KKTM (Penang)

iii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 1 – SMI) iv. SME 3931 : Engineering Lab – Year 3 v. SMU 3742 : Advanced Manufacturing (AMT) – SPACE (FPPSM – KL)


Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) – German-Malaysia Institute (GMI)

ii. MMP 2663 : Advanced Manufacturing Technology (AMT) – Master by Course iii. SMR 4722 : Advanced Manufacturing

8

Technology (AMT) – Year 4 (SMP) iv. SME 3942 : Industrial Engg. Lab. - Year 3



Assembly (DFMA) – Master by Course ii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 1 – SMI)


Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) – German-Malaysia Institute (GMI)

ii. SMR 4722 : Advanced Manufacturing Technology (AMT) – Year 4 (SMP) iii. SME 3942 : Industrial Engg. Lab. - Year 3



Assembly (DFMA) – Master by Course ii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 1 – SMI) iii. SMR 4712 : Design for Manufacture and Assembly (DFMA) – Year 4 (Section 2 – SMP)



ii. SMN 4882 : Advanced Manufacturing Technology (AMT) – Year 4 (SMI) iii. SMR 4722 : Advanced Manufacturing Technology (AMT) – Year 4 (SMP) iv. SME 3942 : Industrial Engg. Lab. - Year 3

9





Level : Master & Bachelor Engineering Subjects : i. MMP 1663 : Design for Manufacture and Assembly (DFMA) – Master by Course (Offshore) - Penang

ii. SMN 4882 : Advanced Manufacturing Technology (AMT) – Year 4 (SMI) iii. SMR 4722 : Advanced Manufacturing Technology (AMT) – Year 4 (SMP) iv. SME 3942 : Industrial Engg. Lab. - Year 3






ii. SMN 4882 : Advanced Manufacturing Technology (AMT) – Year 4 (SMI) iii. SMR 4722 : Advanced Manufacturing Technology (AMT) – Year 4 (SMP) iv. SMU 3713 : Manufacturing Processes – Year 2 (FPPSM) (Section 1)

10

v. SMU 3713 : Manufacturing Processes – Year 2 (FPPSM) (Section 2)



Assembly (DFMA) – Master by Course ii. SMR 5713 : Design for Manufacture and Assembly (DFMA) – Year 5 iii. SMR 4713 : Design for Manufacture and Assembly (DFMA) – Year 4 iv. SME 3931 : Machine Shop Lab. - Year 3


Level : Bachelor Engineering Subjects : i. Advanced Manufacturing Technology

(AMT) – Year 3 (FPPSM) ii. Manufacturing Processes – Year 2 (FPPSM) iii. Engineering Module. - Year 4


Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course

ii. Design for Manufacture and Assembly (DFMA) – Year 4 iii. Machine Shop Lab. - Year 3


Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course (Pesisir)

ii. Manufacturing Processes – Year 2 (FPPSM)

iii. Engineering Module - Year 4



ii. Design for Manufacture and Assembly

11

(DFMA) – Year 4 iii. Metrology Lab. - Year 3


Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course (Pesisir) ii. Advanced Manufacturing Technology

(AMT) - Year 4 (FPPSM) iii. Engineering Module - Year 4





Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course (Pesisir) ii. Manufacturing Processes – Year 3

iii. Engineering Module - Year 4





Level : Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) - Year 4

ii. Manufacturing Automation - Year 3 iii. Machine Shop Lab. - Year 3

• Session : 2002/2003

12

Semester : I Level : Master & Bachelor Engineering

Subjects : i. Design for Manufacture and Assembly (DFMA) – Master by Course

ii. Metal Forming Technology - Year 4 iii. Lab. Module - Year 4


Level : Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) - Year 4

ii. Manufacturing Automation - Year 3 iii. Machine Shop Lab. - Year 3


Level : Master & Bachelor Engineering Subjects : i. Design for Manufacture and Assembly (DFMA) - Master by Course

ii. Advanced Manufacturing Technology (AMT) - Year 4 iii. Lab. Module - Year 4

• Session : 2000/2001 Semester : III

Level : Bachelor Engineering Subjects : i. Metal Forming Technology - Year 4


Level : Bachelor Engineering Subjects : i. Machine Shop Lab. - Year 3 (Section 1)

ii. Machine Shop Lab. - Year 3 (Section 2) iii. Advanced Manufacturing Technology (AMT) - Year 5




• Session : 1999/2000 Semester : November

13



• Session : 1999/2000 Semester : June

Level : Bachelor Engineering Subjects : i. Manufacturing Processes - Year 3

ii. Lab. Module - Year 4 iii. Advanced Manufacturing - Year 5

• Session : 1998/99 Semester : December

Level : Bachelor Engineering Subjects : i. Manufacturing Automation - Year 3 and 4

ii. Advanced Manufacturing - Year 5

• Session : 1998/99 Semester : June

Level : Bachelor Engineering Subjects : i. Manufacturing Processes - Year 2 ii. Lab. Module - Year 4

iii. Design for Manufacturing - Year 5

• Sessi : 1997/98 Semester : December

Level : Bachelor Engineering Subject : i. Manufacturing Automation - Year 4

ii. Production Lab - Year 3

• Session : 1993/94 Semester : July

Level : Diploma Subject : i. Production Technology - Year 2

ii. Metrology Lab - Year 2


Level : Bachelor Engineering Subject : i. Production Technology - Year 3



Level : Diploma

14

Subject : i. Production Technology - Year 2 ii. Metrology Lab - Year 2 iii. Static - Year 1


Level : Bachelor Engineering & Diploma Subject : i. Production Technology - Year 4

ii. Metrology Lab - Year 3 iii. Metrology Lab - Year 2


Level : Diploma Subject : i. Production Technology - Year 2 ii. Metrology Lab - Year 2


Level : Bachelor Engineering Subject : i. Production Technology - Year 3



Level : Bachelor Engineering & Diploma Subject : i. Static - Year 1

ii. Engineering Drawing - Year 1 iii. Experimental Technique - Year 1


Level : Bachelor Engineering & Diploma Subject : i. Static - Year 1

ii. Engineering Drawing - Year 1 iii. Experimental Technique - Year 1


Level : Bachelor Engineering & Diploma Subject : i. Production Technology - Year 2

ii. Production Lab - Year 2


Level : Diploma & Bachelor Engineering Subject : i. Production Technology - Year 2

15

ii. Production Lab - Year 2 iii. Metrology Lab - Year 2


Level : Diploma Subject : i. Production Technology -Year 2

ii. Production Lab - Year 2 iii. Metrology Lab - Year 2

6.2 Project Supervision 6.2.1 Post-Graduate Level

• Level : Master Engineering (By Course) Session : 2012/2013

Semester : II No. of Students : 3 i. Student : Mohd Faezal Bin Omar Baki

Title : Product Design Improvement Through Theory of Inventive Problem Solving (TRIZ) Approach and Design for Manufacture and Assembly (DfA) Methodology for Consumer Product

ii. Student : Mohd Hafiz Abdul Karim

Title : Invention Through Integration of Theory of Inventive Problem Solving (TRIZ) and Design

for Manufacture and Assembly (DfMA) Methodologies for Automotive Front End Structure

iii. Student : Ainni Binti Alias

Title : Product Design Improvement Through Design for Assembly (DfA) and Theory of Inventive Problem Solving (TRIZ) Methodologies


Semester : I No. of Students : 5 i. Student : Afshin Aslian

Title : Invention Through Integration of Theory of Inventive Problem Solving (TRIZ) and Design for Manufacturing and Assembly (DfMA)

16

ii. Student : Mohd Darnalis Bin Abdul Rahman Title : Cellular Manufacturing System Development for Machine-Part Cell Formation and

Operation Sequencing

iii. Student : Nuryusliha Binti Hamzah Title : Invention Through Integration of Design For Assembly (DfA) and Theory of Inventive Problem Solving (TRIZ) Methodologies

iv. Student : Khairul Anuar Bin Mohd Jais

Title : Product Design Improvement Through Design for Assembly (DfA) Methodology and Theory of Inventive Problem Solving (TRIZ) Approach

v. Student : Jerrize Izah Binti Jamalludin

Title : Product Design Improvement Through Design for Assembly (DfA) and Theory of Inventive Problem Solving (TRIZ) Methodologies


Semester : I No. of Students : 1 i. Student : Wiwiek Fatmawati

Title : Analysis of Product Disassemblability Using the Disassembly Evaluation Chart Methodology

• Level : Master Engineering (By Course - Pesisir) Session : 2007/2008

Semester : I No. of Students : 1 i. Student : Baizura Binti Zubir @ Zubair

Title : Disassemblability Design Efficiency (ADE) Analyses for Design for Automatic Assemblies (DfAA)


Semester : II No. of Students : 1 i. Student : Shayfull Zambree Abd. Rahim

Title : Material Flow Analysia in Two and Three-Plate Moulds for Mould Design Selection

17


Semester : II No. of Students : 1 i. Student : Wan Abd. Rahman As-Syahid

Wan Ibrahim Title : Design and Development of Thermodynamics

Appratus Using Boothroyd-Dewhurst DFMA Methodology


Semester : I No. of Students : 1 i. Student : Ahmad Humaizi Hilmi

Title : Design and Analysis of a Paintball Marker Using Boothroyd-Dewhurst DFMA Methodology


Semester : II No. of Students : 1 i. Student : Mohd Ruzi Haji Harun

Title : Part Combination of Design for Assembly (DFA) Using Effort Flow Analysia (EFA)


Semester : II No. of Students : 2 i. Student : Nasuha Saude

Title : Development of Computer-Aided Reprocessability Index (CARPI) system for Rotational Parts

ii. Student : Rozie Nani Ahmad Title : Development of Spreadsheet Analysis

Syatem (SAS) for DFA House Methodology


Semester : II

18

No. of Students : 2 i. Student : Yusri Yusof

Title : Disassemblability Evaluation Method (DEM) for Green Products

ii. Student : Zulkeflee Abdullah

Title : Analysis and Optimization of the Product and Process Design Using DFA House Methodology


Semester : II No. of Students : 4 i. Student : Lee Kian Hong

Title : The Disassembly Sequences Generation Using The Graph of Connection Precedence Relationship (CPR-Graph)

ii. Student : Amin Shah Omar Title : Environmentally Conscious Design for Car

Air-Conditioning Compressor

iii. Student : Badrul Aisham Md. Zain Title : Penilaian Reka Bentuk untuk Pemasangan (DFA) Hitachi AEM untuk Peralatan Elektrik : Satu Kajian Kes

iv. Student : Md. Razin Jaaffar

Title : Penilaian Reka Bentuk untuk Pemasangan (DFA) Lucas-Hull untuk Peralatan Elektrik : Satu Kajian Kes

• Level : Master Engineering (By Research) Session : 2000/2001

Semester : II No. of Students : 1 i. Student : Muhamad Ikhwan Jambak

Title : Database Development for Supporting Machining of Prismatic Components

6.2.2 Under-Graduate Level

• Level : Bachelor Engineering

19

Session : 2012/2013 Semester : II

No. of Students : 3 i. Student : Muhammad Izzuddin Bin Mohd Jamalludin

Title : Integration of Theory of Inventive Problem Solving(TRIZ) and Hitachi AEM for Product Development

ii. Student : Tsen Fui Bing

Title : Integration of Theory of Inventive Problem Solving and Lucas-Hull DfA Methodology for Product Development

iii. Student : Ummi Habibah Binti Awang Title : Integration of Theory of Inventive Problem Solving and Boothroyd-Dewhurst DfA Methodology for Product Development

• Level : Bachelor Engineering Session : 2008/2009

Semester : II No. of Students : 4 i. Student : Wong Twee Chiang

Title : Development of the Prototype System For Selecting Material and Manufacturing Processes Using Boothroyd-Dewhurst DfM Methodology

ii. Student : Roslinda Idrus

Title : Design for Assembly : A Design Improvement for Assembled Product Using Hitachi Assemblability Evaluation Method (AEM)

iii. Student : Nor Laili Ali

Title : Design for Assembly : A Design Improvement for Assembled Product Using Boothroyd- Dewhurst DfMA Methodology

iv. Student : Noor Taqinah Mohd Khadri

Title : Design for Assembly : A Design Improvement for Assembled Product Using Lucas-Hull DfA Methodology


Semester : II

20

No. of Students : 5 i. Student : Mohd Fazly Md Isa

Title : Comparison of DfAA Evaluations on Assembled Product

ii. Student : Mohd Arsyad Haneefa

Title : Computer-Aided Reverse Engineering Approach for Motorcycle Side Mirror

iii. Student : Mohd Azham Abdullah

Title : Design of an Automated Sorting System for Plastic Recyclables

iv. Student : Fairuz Nadia Mustaffa

Title : Determination of Maintainability Index (MI) for Design Performance

v. Student : Mohd Al-Hafiz Jaamatwok

Title : Disassembly Time Evaluation of a Product Using Work Factor Method (WFM)


Semester : II No. of Students : 3 i. Student : Hoon Chia Ming

Title : Reverse Fishbone Diagram Approach for Design for Product Retirement

ii. Student : Kong Yuen Tze

Title : Development of the Prototype Analysis System for Design for Automatic Assembly (DFAA)

iii. Student : Ooi Cheng Yang

Title : Product Design Improvements Using Design for Automatic Assembly (DFAA) Methodology


Semester : II No. of Students : 4 i. Student : Chong Teik Seng

21

Title : Development of Boothroyd-Dewhurst DFMA System

ii. Student : Benjamin Pinto

Title : Development of Lucas-Hull DFA Methodology

iii. Student : Poornasundaram Pillai a/l Arumugam

Title : Further Improvement of Prototype Handling System for Plastic Injection Molding Machine

iv. Student : Zulkifli Moksin

Title : Mold Cost Estimation


Semester : II No. of Students : 2 i. Student : Lee Chung Sin

Title : Development of Spreadsheet Analysis System (SAS) for the DFA House Methodology

ii. Student : Ooi Chuon Yuen

Title : Computer-Aided Reprocessability Index (CARPI) System Development for Rotational and Prismatics Parts


Semester : I No. of Students : 1 i. Student : Janice Ngu See Ting

Title : Spreadsheet Analysis System (SAS) for the Disassemblability Evaluation Method (DEM)


Semester : II No. of Students : 2 i. Student : Mohd Rohaizal Aziz

Title : Improvement of Prototype Stripping Operation System for Rubber Glove Manufacturing Process

22

ii. Student : Mohd. Ridhuwan Abd. Rahim

Title : Improvement of Prototype Handling System for Plastic Injection Molding Machine


Semester : II No. of Students : 8 i. Student : Ahmad Yusri Abdullah

Title : Reka bentuk Konsep dan Terperinci Bagi Mesin Pengupas Ari Kelapa

ii. Student : Wan Ismail Wan Mat Yusof

Title : Analysis and Optimization of the Product and Process Design Using DFA House Methodology

iii. Student : Firdaus Shukri Title : Reka bentuk Untuk Pemasangan (DFA) bagi

Produk Plastik : Kaedah Hitachi AEM iv. Student : Muhamad Ridzuan Sani

Title : Reverse Fishbone Diagram Approach for Design for Product Retirement (DFR)

v. Student : Choong Chung Tong

Title : Axiomatic Design Approach to Product Design for Assembly (DFA)

vi. Student : Teoh Hui Kuun

Title : Development of Design for Assembly (DFA) System for Hitachi Assemblability Evaluation Method (AEM)

vii. Student : Tee Poy Chay

Title : Life Cycle Design (LCD) for Ceramic Products viii. Student : Shahrizaili Salleh

Title : Redesign of a Microcomputer Housing for Quicker Assembly and Disassembly


Semester : I No. of Students : 2 i. Student : Rozita Sami'an

23

Title : Further Development of Operation Sequencing for Process Planning System

ii. Student : Suhaimi Abdul Rahman

Title : Reka Bentuk Konsep dan Terperinci Bagi Mesin Pengupas Tempurung Kelapa


Semester : II No. of Students : 8 i. Student : Muhamad Fadzly Misbah

Title : Reprocessability Index (RPI) for Environmental Impact Estimation

ii. Student : Teoh Chin Teik

Title : Life Cycle Assessment (LCA) for Assembled Products : A Literature Survey

iii. Student : Mohd. Hanif Abdul Rashid

Title : Further Development of Auto-Packaging in Glove Manufacturing Process

iv. Student : Teh Soo Sen

Title : Fabrication and Testing of a Prototype Handling System for Plastic Injection Moulding Machine

v. Student : Mah Hoong Wai

Title : Further Development of Auto-Stripping Operation System for Glove Manufacturing Process

vi. Student : Ong Lay Eim Title : Development of Stacked Die Ball Grid

Array (SDBGA) Package vii. Student : Ng Kim Choo

Title : Quality Assurance of a Pocket Phones Plastic Components

viii. Student : Moh Wai Kong

Title : Conceptual and Detail Design for Copra Dryer Machine

24


Semester : I No. of Students : 7 i. Student : Ismail Mohamed

Title : Pengurusan Sisa Pepejal di Cheras, Wilayah Persekutuan

ii. Student : David Woo Chee Yau

Title : Case Study on Cast Iron Casting

iii. Student : Ahmad Zaidi Md. Zain Title : Reka Bentuk dan Simulasi Robot Gantry

untuk ASRS dalam Sistem CIM

iv. Student : Low Ching Yen Title : Mereka Bentuk Semula Susunatur Bilik

Bersih MMI Sdn. Bhd.

v. Student : Lim Chee Chang Title : Scrap Cost Reduction Through FMEA

Technique

vi. Student : Ng Chee Hen Title : Aplikasi TPM Dalam Meningkatkan

Keberkesanan Mesin

vii. Student : Soo Chen Hsien Title : Defect Analysis and Quality Improvement


Semester : November No. of Students : 9 i. Student : Sallee Iskandar Musa

Title : Design and Development of Aluminium Can Crusher

ii. Student : Arief Rahman Halim Title : Reka Bentuk Susunatur Bengkel

Kejuruteraan ATMA

iii. Student : Ramlee Mohammad Title : Penggunaan Kaedah Boothroyd-Dewhurst

Reka Bentuk untuk Pembuatan dan

25

Pemasangan (DFMA)bagi senapang M-16

iv. Student : Sin Jee Boon Title : Reka Bentuk untuk Pengacuanan Suntikan

(DFIM) bagi Produk Plastik

v. Student : Mohd. Mubarak Haji Ahmad Pudelani Title : Mereka Bentuk Sistem Susunatur Kilang

Membuat Barangan Hiasan Berasaskan Batu Marmar

vi. Student : Thiruchelvan a/l Ramasamy

Title : Analisa dan Pembangunan Anggota Palsu

vii. Student : Hooi Win Hun Title : Mereka Bentuk dan Membangunkan Dai

Penimbulan Modular

viii. Student : Chang Chung Leong Title : Mereka Bentuk dan Membangunkan Dai

Ujian Tempaan Sejuk Langsung

ix. Student : Premkumar a/l Suhandiraviran Title : Mismach Defect at Mould


Semester : June No. of Students : 13 i. Student : Koh Yong Heng

Title : Representation of Feature-based for Assembly Modelling

ii. Student : Dian Rouzan Jamaluddin

Title : Auto Packaging in Gloves Manufacturing Process

iii. Student : Chia Hon Yen

Title : A Knowledge-based Quality Control System Using SPC Techniques

iv. Student : Tan Poh Lai Title : Computerised Selection Procedure for

Plastic Manufacturing Processes v. Student : Hee Chia Wei

26

Title : The DFA Evaluation Methods of Hitachi, Lucas and Boothroyd-Dewhurst : A Case Study

vi. Student : Lee Nean Tze Title : The DFA Evaluation Methods of Hitachi,

Lucas and Boothroyd-Dewhurst : A Case Study

vii. Student : Loong Siew Cheng Title : The DFA Evaluation Methods of Hitachi,

Lucas and Boothroyd-Dewhurst : A Case Study

viii. Student : Teh Chee Toh Title : Design and Simulation of Handling System of Plastic Injection Moulding

ix. Student : Lor Chee Keong Title : A Knowledge-based Diagnosis System for Wire-EDM

x. Student : Ng Chiew Leng

Title : Design for Injection Molding (DFIM) for Plastic Products

xi. Student : Hairul Anuar Abd. Karim Title : Object-Oriented Product Data Model for

Computer-Integrated Manufacturing xii. Student : Tew Chen Lung

Title : Penggunaan “Failure Mode and Effects Analysis” (FMEA) dalam Kawalan Proses

xiii. Student : Mah Cheow Yang

Title : Perlaksanaan Sistem Barisan Sel Kerja (Workcell) Dalam Produk Elektronik


Semester : December No. of Students : 12 i. Student : Azhar Untong

Title : Perlaksanaan Sistem CAD?CAM dalam Industri Seramik

ii. Student : Chow Ji Feng

27

Title : Feature-based Design System Development Using Object-Oriented Methodology

iii. Student : Lin Kean Yee Title : Auto Stripping in Gloves Manufacturing

Process iv. Student : Che'er Keng Kiat Title : Selection of Plastic Material Using an

Object-Oriented Methodology v. Student : Tan Siew Lu

Title : Application of DFMA for Sand Blasting Machine

vi. Student : Mohd. Nizan Abu Bakar Title : The Use of Assembly Evaluation Method in

Design for Assembly

vii. Student : Ng E-Ee Title : The Use of Assembly Evaluation Method in

Design for Assembly

viii. Student : Ahmad Rahmad Ibrahim Title : Penggunaan Proses Prototaip Pantas dalam

Industri di Malaysia : Satu Kajian Kemungkinan

ix. Student : Raja Mahmud Raja Ibrahim

Title : Memperbaiki Aliran Masa Operasi Pemeriksaan Kenderaan PUSPAKOM

x. Student : Heun Foo Heng Title : Case Study on Die Cut Fibre Board Boxes

Making Operation

xi. Student : Ahmad Kamsan Musa Title : Kajian Reka Bentuk 3 Plat Acuan Pancitan

xii. Student : Zammeri Sahar Title : Mereka Bentuk Tatacara Operasi

Pengeluaran Loji Pemecah Batu


Semester : June No. of Students : 2

28

i. Student : Puah Yaw Fong

Title : Determination of Feasible Tool Approach Directions for Prismatic Machined Parts

ii. Student : Tay Kay Han

Title : Preliminary Specification and Development of A P.C. Based CAPP Software for Rotational Machined Components

• Level : Bachelor Engineering Session : 1993/1994 No. of Students : 6 i. Student : Wong Sau Hong Title : The Integration of Design and

Manufacturing Functions by Design with Features Approach for Rotational Machined Components

ii. Student : Pang Cheng Hoon Title : A Feature-Based Design for Prismatic

Machined Components iii. Student : Pang Kok Beng Title : A Design with Feature Approach for

Sheet Metal Components iv. Student : Lee Chien Kok Title : A Computer Programme for Selection of

Plastic Manufacturing Processes v. Student : Tan Gay Khoon Title : Development of Computer Programme

for Statistical Process Control vi. Student : Yeoh Hin Seng Title : A Feature Recognition Approach for

Prismatic Machined Components

• Level : Bachelor Engineering Session : 1992/1993 No. of Students : 3

29

i. Student : Tengku Jaafar Tengku Muda Title : A Computer Programme for Process

Planning of Sheet Metal Components ii. Student : Nazaruddin Shafri Title : Kajian Kemungkinan Membangunkan

Sebuah Kilang Berasaskan Gentian Kaca

iii. Student : Azman Hj. Mohd. Daud Title : Pengaturcaraan Berkomputer untuk

Pemilihan Pam

• Level : Bachelor Engineering Session : 1991/1992 No. of Students : 8 i. Student : Lim Chee Beng Title : A Computer Programme for Helical and

Bevel Gear Design ii. Student : Goh Seng Loo Title : Development of an Interactive Process

Planning System for Turned Components with Rotational and Non-Rotational Features

iii. Student : Chai Wai Choon Title : Process Planning Using Expert System

Approach iv. Student : Lim Seong Cheak Title : A Development of the Process Planning

System for Rotational Components

v. Student : Ayob Ahmad Title : Mereka bentuk Satu Sistem Perancangan

Bersaling Tindak bagi Komponen Prisma vi. Student : Soh Lin Lin Title : Expert Process Planning System

vii. Student : Kiranjit Singh Title : Facility Planning for a Rattan-Based

Furniture Factory in Johore viii. Student : Charles Santha Kumar Title : Development of an Expert System for

Trouble Shooting of Plastics Injection

30

Moulding 6.3 Examiners & Evaluators

• Task : Panel of Evaluator Program : Diploma Kejuruteraan Pembuatan & Diploma Kejuruteraan Pengeluaran Division : Pusat Latihan Teknologi Tinggi (ADTEC), Batu Pahat, Johor Organiser : Malaysian Qualifications Agency (MQA)

Date : 18 – 19 July, 2011

• Task : Panel of Evaluator Program : Bachelor on Maintenance Technology, Automotive Technology & HVAC Technology Division : Universiti Teknikal Malaysia Melaka (UTeM), Durian Tunggal, Melaka Organiser : Malaysian Qualifications Agency (MQA)

Date : 25 – 27 June, 2011

• Task : Panel of Evaluator Program : Foundation Studies in Engineering Division : Institut Teknologi Pertama (ITP), Mantin, Negeri Sembilan Organiser : Malaysian Qualifications Agency (MQA)

Date : 5 – 6 May, 2011

• Task : Panel of Evaluator Program : Diploma Kejuruteraan Pembuatan & Diploma Kejuruteraan Pengeluaran Division : Kolej Kemahiran Tinggi MARA (KKTM) Kuantan, Pahang Organiser : Malaysian Qualifications Agency (MQA)

Date : 14 – 16 March, 2011

• Task : Panel of Evaluator Program : Diploma Kejuruteraan Pembuatan & Diploma Kejuruteraan Pengeluaran Division : Pusat Latihan Teknologi Tinggi (ADTEC), Kulim, Kedah Organiser : Malaysian Qualifications Agency (MQA)

Date : 21 – 23 February, 2011

• Task : Panel of Evaluator

31

Program : American Degree Transfer Programme (Science/Engineering) Division : Kolej Universiti Sunway, Petaling Jaya,

Selangor Organiser : Malaysian Qualifications Agency (MQA)

Date : 23 – 24 November, 2008

• Task : Article Reviewer Program : Jurnal Mekanikal

Faculty : Mechanical Engineering (FKM), UTM Title : The DFEL Value Methodology: A Tool for

Design-for-Environment in Automotive Engineering

Date : 11 November, 2008

• Task : Panel of Evaluator Program : American Degree Transfer Programme (Science/Engineering)

Division : Kolej Universiti Nilai, Nilai, Negeri Sembilan

Organiser : Malaysian Qualifications Agency (MQA) Date : 3 – 4 November, 2008

• Task : Article Reviewer and Editor Program : The 2nd International Conference on Science and Technology (ICSTIE 2008) :

Applications in Industry and Education Division : UiTM, Penang Date : 16 July, 2008

• Task : Article Reviewer Program : Jurnal Teknologi

Division : Penerbit UTM Title : The Methodology for Selecting Design

Concepts at Conceptual Design Stage using Analytical Hierarchy Process

Date : 7 May, 2008

• Task : Article Reviewer and Editor Program : National Conference on DECON 2008

Division : UTeM Date : 18 February, 2008


Division : Penerbit UTM Title : Product Platform Architecture –

32

A Manufacturability and Commonality Analyses

Date : 23 May, 2007


Division : Penerbit UTM Title : An Expert System for Auto Wire Bond

Machine Date : 7 May, 2007


Faculty : Mechanical Engineering (FKM), UTM Title : The Concept of End of Life Vehicles Recovery:

The Description of the Porcess, Impact from Developed Countries and Direction of Research

Date : 14 September, 2006


Division : Penerbit UTM Title : Development of Maintainability Index

Template Date : 22 May, 2006


Division : KUTKM Title : Design of Safety System for Industrial Robots

Work Cells Date : 28 April, 2006


Division : KUTKM Title : Thermal Errors Affecting Engineering

Measurement Date : 28 April, 2006


Division : KUTKM Title : Mechanical Design of An Experimental Rig for

Measurement of Secondary Yielding Date : 28 April, 2006

33


Division : KUTKM Title : Analysis of Plastic Flow Inside the Family

Mould Date : 28 April, 2006


Division : KUTKM Title : Product Design for Mass Customization and

Postposement Date : 28 April, 2006

• Task : Article Reviewer Program : Conference on Manufacturing & Electronic

Technology (COMET 2006) Division : Penerbit UTM

Title : Computer Aided Garment 2D to 3D Date : 13 December, 2005

• Task : External Examiner (Viva) Student : Rahmatullah Program : Master in Science Faculty : Universiti Sains Malaysia (USM)

Thesis's Title : Development of an Approach to Enhance Design for Assembly (DFA)

Date : 23 October, 2003

• Task : Evaluator (Visit) Program : American Degree Transfer Programme (Science/Engineering) Division : Kolej Sunway, Petaling Jaya, Selangor Organiser : National Board of Accreditation (LAN)

Date : 13 & 14 October, 2003

• Task : Chairman of Oral Examination Student : Ayu Bidiawati J.R. Program : Sarjana Kej. (Mechanical) Faculty : Mechanical Engineering



Division : Mechanical Engineering (FKM), UTM Title : Development of Sorting System in the Plywood Grading Line

34

Date : 23 July, 2003


Division : Penerbit UTM Title : State-of-the Art Survey on Modular Product Architecture

Date : 18 June, 2003

• Task : Evaluator Program : American Degree Transfer Programme (Science/Engineering) Division : Kolej Sunway, Petaling Jaya, Selangor Organiser : National Board of Accreditation (LAN)



Division : Penerbit UTM Title : Pendekatan Ke Arah Meningkatkan

Perkongsian Komponen Berdasarkan Kaedah Modular


• Task : External Examiner Student : Rahmatullah Program : Master in Science Faculty : Universiti Sains Malaysia (USM)

Thesis's Title : Development of an Approach to Enhance Design for Assembly (DFA)

Date : 22 May, 2003

• Task : Evaluator Program : Diploma of Mechanical Engineering Division : Institut Teknologi KENWA, Sandakan Organiser : National Board of Accreditation (LAN)

Date : 12 May, 2003

• Task : Technical Evaluator Program : IGS Scheme Grant Company : Juru Alam Sdn. Bhd. Organiser : MOSTE

Date : 9 March, 2003

• Task : Chairman of Oral Examination Student : Tan Poh Lai Program : Sarjana Kej. Mechanical

35

Faculty : Mechanical Engineering Thesis’s Title : Analysis of Tool Life and Surface Roughness

During Hard Turning of AISI H13 Hot Work Tool Steel Using Mixed Ceramics



Division : Penerbit UTM Title : A Comparative Study of Qualitative and

Quantitative Module Identification Method Date : 27 January, 2003


Date : 15 January, 2003


Date : 20 December, 2002

• Task : Evaluator for Presentation Student : Risal Abu Program : Master in Mechanical Engineering Faculty : Mechanical Engineering (FKM), UTM

Thesis's Title : Automation of Process Sequencing for Pocket Machining Using GRIP


• Task : Evaluator (Re-Evaluation) Program : Diploma of Mechanical Engineering Division : Institut Teknologi KENWA, Sandakan Organiser : National Board of Accreditation (LAN)


• Task : Internal Examiner Student : Rozlina Md. Sirat Program : Master in Mechanical Engineering Faculty : Mechanical Engineering (FKM), UTM

Thesis's Title : The Implementation of Design for Assembly (DFA) in Small and Medium- Sized Industries (SMIs) in Malaysia


36


Faculty : Mechanical Engineering (FKM), UTM Title : Efficient Refernce Pulse CNC Interpolator

for 2D Parametric Curve Date : 30 May, 2002

• Task : Chairman & Evaluator Program : Diploma of Mechanical Engineering Division : Sepang Institute of Technology, Klang Organiser : National Board of Accreditation (LAN)

Date : 22 - 23 April, 2002

• Task : External Examiner Student : Mosaddeque Mahmud Rizwan Program : Master in Science Faculty : Universiti Sains Malaysia (USM)

Thesis's Title : Integrated Approach for Improving Product Design

Date : 18 February, 2002

• Task : Evaluator Program : Sarjana-Muda Pendidikan Kejuruteraan

Mekanik Division : Universiti Terbuka Malaysia (UNITEM)

Organiser : National Board of Accreditation (LAN) Date : 5 December, 2001

• Task : Technical Evaluator Program : IGS Scheme Grant Company : Standard Equipment Sdn. Bhd. Organiser : MOSTE

Date : 23 August, 2001




Faculty : Mechanical Engineering (FKM), UTM Title : IJETSS: A Prototype Expert System for

Fault Diagnosis on Aircraft Engine Date : 17 July, 2001

37

• Task : Evaluator Program : Diploma of Mechanical Engineering Division : PRIME College, Subang Organiser : National Board of Accreditation (LAN)

Date : 4 July, 2001



• Task : Evaluator Program : Bengkel Penyemakan Permohonan

Proposal IRPA RM-8 Faculty : Mechanical Engineering (FKM), UTM Organiser : Universiti Teknologi Malaysia


• Task : Evaluator Program : Diploma of Mechanical Engineering Division : Institut Teknologi KENWA, Sandakan Organiser : National Board of Accreditation (LAN)

Date : 14 May, 2001


Division : Penerbit, UTM Title : AutoID Technologies in Tool Management

Systems Date : 14 April, 2000

• Task : Evaluator for Presentation Student : Rozlina Md. Sirat Program : Master in Mechanical Engineering Faculty : Mechanical Engineering (FKM), UTM

Thesis's Title : The Implementation of Design for Assembly (DFA) in Small and Medium- Sized Industries (SMIs) in Malaysia



Division : Penerbit, UTM Title : Productivity Improvement with

Application of Computer-Aided

38

Engineering in a Printed Circuit Board Assembly (PCBA) Manufacturing Plant - Case Study

Date : 9 March , 2000

• Task : Internal Examiner Student : Napsiah Bte Ismail Program : Doctor of Philosophy Faculty : Mechanical Engineering (FKM), UTM Thesis's Title : Edge Boundary Classification Technique

for Feature Recognition Date : June, 1998

• Task : Chairman of Oral Examination Student : Kalim Ullah Program : Sarjana Kej. Mechanical Faculty : Mechanical Engineering (FKM), UTM Thesis’s Title : Investigating on Ballising as a Precision Manufacturing Process Date : 17 February, 1998

• Task : Evaluator Subject : Encyclopaedia of Science & Technology Entry Word : Pemesinan Alur Elektron Classification : Process Category : 3 Date : 8 March, 1996

• Task : Evaluator Subject : Encyclopaedia of Science & Technology Entry Word : Pemesinan ECG Classification : Process Category : 3 Date : 23 March, 1996

• Task : Evaluator Subject : Encyclopaedia of Science & Technology Entry Word : Pemesinan ECM Classification : Process Category : 3 Date : 23 March, 1996 7.0 Publications

7.1. Journals

• Level : National

39

Author : Ariffin Abdul Razak Title : An Object-Oriented Feature- Based Design System. Part I : Face-Based Detection of Feature

Interactions Place : Jurnal Teknologi, UTM Date : June, 1999

• Level : National Author : Ariffin Abdul Razak

Title : An Object-Oriented Feature- Based Design System. Part II : Tool Approach Directions using Ray Firing Technique

Place : Jurnal Teknologi, UTM Date : December, 1999


Title : An Object-Oriented Feature- Based Design System. Part III : Tool Approach Directions using Volume Sweeping Technique

Place : Jurnal Teknologi, UTM Date : December, 1999


Title : The Integration of Design and Manufacturing Using a Design- with-Feature Approach for Turned Components

Place : Jurnal Teknologi, UTM Date : June, 1992

7.2 Working Papers

• Level : International Author(s) : Wiwiek Fatmawati &

Ariffin Abdul Razak

Title : Analysis of Product Disassemblability

Using the Disassembly Evaluation

Chart Methodology Name of Conference : International Graduate Conference

on Engineering and Sciences Place : UTM, Skudai, Johor

40

Date : 23 – 24 Disember 2008

• Level : National Author(s) : Ariffin A. R., Rozaimi M.S. &

Ooi C.Y. Title : Feature-Based Design Approach for Reprocessability Index (RPI)

Evaluation Name of Conference : National Conference on Design and Concurrent Engineering 2006 (DECON 2006)

Place : Century Mahkota Hotel, Malacca Date : 9 – 10 August, 2006

• Level : National Author(s) : Ariffin A. R. & Zulkeflee A. Title : Analysis and Improvement of the

Product and Process Design using DFA House Methodology

Name of Conference : National Conference on Design and Concurrent Engineering 2006 (DECON 2006)

Place : Century Mahkota Hotel, Malacca Date : 9 – 10 August, 2006

• Level : National Author(s) : Chong T.S. & Ariffin A. R. Title : Development of The Prototype System

for Design for Assembly (DfA) Using Boothroyd-Dewhurst DFA Method

Name of Conference : Conference on Manufacturing and Electronic Technology (COMET-2006)

Place : UTM Skudai, Johor Date : 14 – 15 January, 2006

• Level : National Author(s) : Ariffin A. R. & Ooi C.Y. Title : Computer-Aided Reprocessability Index (CARPI) System for Rotational and Prismatic Parts Name of Conference : National Seminar on Industrial Computing (iComp_2005)

Place : Putrajaya Date : 24 September, 2005

• Level : National Author(s) : Ariffin A. R. & Lee C. S.

41

Title : Spreadsheet Analysis System (SAS) for the DFA House Methodology Name of Conference : National Seminar on Industrial Computing (iComp_2005)

Place : Putrajaya Date : 24 September, 2005

• Level : International Author(s) : A.A. Razak Title : Detection of Feature Interactions Based on the Reduction of a Feature's "Real" Face Area Name of Conference : UMTIK 2000

Place : Ankara, Turkey Date : 13 - 15 September, 2000

• Level : International Author(s) : Ariffin A.R. & T.P. Lai Title : An Object-Oriented Selection of Plastic Manufacturing Processes Name of Conference : ICAMT 2000

Place : Johor Bahru, Johor Date : 16 - 17 August, 2000

• Level : International Author(s) : Ariffin A.R., M.S. Rozaimi &

C.T. Teh Title : Handling System for Plastic Injection Molding Machine Name of Conference : ICAMT 2000

Place : Johor Bahru, Johor Date : 16 - 17 August, 2000

• Level : International Author(s) : M.I. Jambak, A.M. Shaharoun &

A.A. Razak Title : Design and Development of Architecture-based Information System for an Automated Manufacturing System Name of Conference : ICCIM 2000

Place : Singapore Date : 28 - 30 March, 2000

• Level : National Author(s) : A.A. Razak & C.L. Ng Title : Design for Injection Molding for Plastic Product : A Case Study

42

Name of Conference : National Seminar of “Design of the Millenium”

Place : Sofitel Hotel, Johor Bahru Date : 15 January, 2000

• Level : International Author(s) : Venkatesh, V.C., Awaluddin, M.S. & Ariffin A.R. Title : The Tool Life, Mechanics and Economics in Conventional and Ultra Precision Machining Name of Conference : ASME International Mechanical Engineering Congress and Exposition

Place : USA Date : November, 1999

• Level : International Author(s) : A.M. Shaharoun, A.A. Razak &

M.I. Jambak Title : Database Development for Supporting Machining of Prismatic Components Name of Conference : World Engineering Congress `99

Place : UPM, Serdang, Selangor Date : 19 - 22 July, 1999

• Level : National Author(s) : A.M. Shaharoun, A.A. Razak &

M.I. Jambak Title : A PC-Based Information System for a

Flexible Manufacturing System Name of Conference : Malaysian Science & Technology Congress `98

Place : USM, Penang Date : 10 - 11 November, 1998


Title : Face-Based Detection of Feature Interactions in An Object-Oriented Feature-Based Design System Name of Conference : Malaysian Science & Technology Congress `98

Place : Johor Bahru, Johor Date : 30 - 31 October, 1998

• Level : National

43

Author(s) : Ariffin Abdul Razak Title : Volume Sweeping Technique for Determination of Feasible Tool Approach Directions Name of Conference : Malaysian Science & Technology Congress `98 Place : Johor Bahru, Johor

Date : 30 - 31 October, 1998

• Level : International Author(s) : Ariffin Abdul Razak, Mohd.

Nasir Tamin & Lim Chee Beng Title : Computerized Selection Procedure for External Spur, Helical and Bevel Gears Name of Conference : INCARF - 93 Place : New Delhi, India

Date : 16 - 19 December, 1993


Nasir Tamin & Lim Chee Beng Title : A Software for Selection Procedure of External Spur, Helical and Bevel Gears Name of Conference : International Conference on

Engineering Software (ICES `93) Place : Staffordshire University,

United Kingdom Date : 15 September, 1993

• Level : International Author(s) : Ariffin Abdul Razak, S. Rajes- ham & C. Shanthakumar

Title : Computer Aided Trouble Shooting for Plastics Injection Moulding

Name of Conference : 3rd. Asia Pasific Plastics and Rubber Conference

Place : Singapore Date : 18 June, 1993


Nasir Tamin, Lim Chee Beng & Seow Hock Thiam

Title : A Computer Program for External Spur Gear Design

44

Name of Conference : International Conference on Computational Methods in Engineering

Place : Singapore Date : 11 November, 1992


Nasir Tamin & Lim Chee Beng Title : A Computer Program for Helical and Bevel Gears Design Name of Conference : 2nd. International Conference of

Die and Mould Technology Place : Singapore


• Level : International Author(s) : Ariffin Abdul Razak

Title : A Design-with-Feature Approach for Rotational Machined Components Name of Conference : 1st. International Conference on

Manufacturing Technology Place : Hong Kong Date : 28 December, 1991


Title : Pendekatan mereka bentuk dengan Sifat bagi Komponen yang Dimesin Secara Putaran

Name of Conference : Malaysian Science & Technology Congress `91

Place : SIRIM, Shah Alam Date : 15 August, 1991

7.3 Technical & Evaluation Reports

• Title : Post-Visit Evaluation Report on "Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Universiti Sunway, Petaling Jaya, Selangor

Submitted to : Malaysian Qualifications Agency (MQA)


• Title : Post-Visit Evaluation Report on

45

"Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Universiti Nilai, Nilai, Negeri Sembilan



• Title : Pre-Visit Evaluation Report on "Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Universiti Nilai, Nilai, Negeri Sembilan


Date : 22 Ogos, 2008

• Title : Pre-Visit Evaluation Report on "Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Universiti Sunway, Petaling Jaya, Selangor


Date : 15 Ogos, 2008

• Title : Post-Visit Evaluation Report on "Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Sunway, Petaling Jaya, Selangor

Submitted to : National Board of Accreditation (LAN)


• Title : Re-Evaluation Report on "Permohonan Kelulusan Pengendalian Kursus Diploma Kejuruteraan Mekanikal", Institut Teknologi Kenwa, Sandakan, Sabah



46

• Title : Evaluation Report on Master’s Thesis "Development of a Method to Enhance Design for Assembly (DfA)", by Rahmatullah

Submitted to : Institut Pengajian Siswazah, USM, Penang


• Title : Pre-Visit Evaluation Report on "Permohonan Bagi Pengakreditan Kursus Pengajian American Degree Transfer (Science/Engineering)", Kolej Sunway, Petaling Jaya, Selangor


Date : 1 July, 2003

• Title : Post-Visit Evaluation Report on "Permohonan Kelulusan Pengendalian Kursus Diploma Kejuruteraan Mekanikal", Institut Teknologi Kenwa, Sandakan, Sabah


Date : 6 June, 2003

• Title : Pre-Visit Evaluation Report on "Permohonan Kelulusan Pengendalian Kursus Diploma Kejuruteraan Mekanikal", Institut Teknologi Kenwa, Sandakan, Sabah


Date : 26 May, 2003

• Title : Evaluation Report on Master’s Thesis "The Implementation of Design for Assembly (DFA) in Small and Medium Sized Industries (SMIs) in Malaysia", by Rozlina Mat Sirat

Submitted to : Sekolah Pengajian Siswazah, UTM, Skudai, Johor


• Title : Evaluation Report on Master’s Thesis "Integrated Approach for Improving

47

Product Design", by Mosaddeque Mahmud Rizwan

Submitted to : Institut Pengajian Siswazah, USM, Penang

Date : 5 April, 2002

• Title : Evaluation Report on "Permohonan Standard Minimum Diploma Kejuruteraan Mekanikal", SIT, Klang, Selangor



• Title : Evaluation Report on "Permohonan Kelulusan Pengendalian Kursus Sarjana Muda Pendidikan Kejuruteraan Mekanik", Universiti Terbuka Malaysia (UNITEM), Kuala Lumpur


Date : 7 January, 2002

• Title : Evaluation Report on "Permohonan Standard Minimum Diploma Kejuruteraan Mekanikal", PRIME College, Subang, Selangor



• Title : Evaluation Report on "Permohonan Kelulusan Pengendalian Kursus Diploma Kejuruteraan Mekanikal", Institut Teknologi KENWA, Sandakan Sabah



• Title : Third Report on "Study on Application of Hitachi Assembla- bility Evaluation Method (AEM)"

Submitted to : Hitachi Scholarship Foundation (HSF), Tokyo, Japan

Date : 6 February, 2001

48

• Title : Second Report on "Study on Application of Hitachi Assembla- bility Evaluation Method (AEM)"


Date : 6 December, 2000

• Title : First Report on "Study on Application of Hitachi Assembla- bility Evaluation Method (AEM)"



• Title : Evaluation Report on Doctoral Thesis "Edge Boundary Classification Technique for Feature Recognition", by Napsiah Ismail

Submitted to : Sekolah Pengajian Siswazah, UTM, Skudai, Johor

Date : May, 1998

7.4 Encyclopaedia

• Subject : Encyclopaedia of Science & Technology Entry Word : Kimpalan Rintangan Classification : Process Category : 1 Date : March, 1996

• Subject : Encyclopaedia of Science & Technology Entry Word : Pateri Classification : Process Category : 2 Date : February, 1996

• Subject : Encyclopaedia of Science & Technology Entry Word : Pencanaian Classification : Process Category : 1 Date : March, 1996

• Subject : Encyclopaedia of Science & Technology Entry Word : Penggerudian Logam Classification : Process

49

Category : 1 Date : March, 1996

• Subject : Encyclopaedia of Science & Technology Entry Word : Penuangan Acuan Kekal Classification : Process Category : 2 Date : February, 1996

• Subject : Encyclopaedia of Science & Technology Entry Word : Pengosongan dan Penebukan Classification : Process Category : 2 Date : February, 1996

• Subject : Encyclopaedia of Science & Technology Entry Word : Pembagasan Pasir Classification : Process Category : 3 Date : April, 1996

• Subject : Encyclopaedia of Science & Technology Entry Word : Pemesinan PBM Classification : Process Category : 3 Date : April, 1996

• Subject : Encyclopaedia of Science & Technology Entry Word : Pemesinan CHM Classification : Process Category : 3 Date : April, 1996

7.5 Others (Working Papers)

• Working paper on establishment of Resource Centre at Rumah Barkat, Pertubuhan Kebajikan Anak-Anak Yatim Negeri Johor, Johor Bahru, 1988.

• Working paper on establishment of Pasukan Pertahanan Awam, Universiti Teknologi Malaysia Branch, 1992.

50

8.0 RESEARCH AND CONSULTANCY

• Co-Investigator for IRPA Project Vote No. 72091, “Development of a Prototype Computer-Integrated Manufacturing System (CIMS) at UTM” from 1996 to 1999 - RM500,000/-.

• Co-Investigator for Intel Technology Sdn. Bhd. Project Vote No. 68837, "Milling of Copper Heat Sink and Silicon Die to Get Mirror Finish" RM132,000/- for 2 years from July 1999 to June 2001.

• Principal Investigator for Research Management Centre (RMC) Short-Term Research Project Vote no. 71549 on "Auto-Stripping Operation in Gloves Manufacturing Process", RM9,000/- from November 1999 to November 2001.

• Principal Investigator for Research Management Centre (RMC) Short-Term Research Project Vote No. 71589 on "Auto-Packaging Operation in Gloves Manufacturing Process", RM19,000/- from December 1999 to December 2000.

• Co-Investigator for Research Management Centre (RMC) Short-Term Research Project Vote no. 71601 on "Design and Development of Finished Product Handling System of Plastic Injection Molding Machine", RM16,000/- from June 2000 to November 2001.

• Co-Investigator for IRPA Project Vote No. 72072, "New HVAC Equipment", Aspect on Manufacturing, 1999 – 2001.

• Commercialization and Prototype Development of a PET Reheat Stretch Blow Mould Machine, Ching Yee Mould Industries Sdn. Bhd., March 1999.

9.0 CO-CURRICULUM 9.1 Non-Governmental Organisations

• Member, Pertubuhan Kebajikan Anak-Anak Yatim Negeri Johor, 1991 until now.

51

• Member, Koperasi Permodalan Melayu Negeri Johor (KPMNJ) since 1996 until now.

• Secretary of Committee, Bimbingan Akademik dan Perpustakaan, Pertubuhan Kebajikan Anak-Anak Yatim Negeri Johor, 1993/94.

• Life Member, PEMADAM Kebangsaan, No. Ahli : 9348, 1991 until now.

• Member of Committee, Pasukan Sukarelawan PEMADAM Negeri Johor, 1992/94.

• Member, Pasukan Pertahanan Awam, Cawangan Johor Bahru, Negeri Johor, 1992 until now.

• Pemeriksa Kira-Kira, Pertubuhan Kebajikan Anak-Anak Yatim Negeri Johor, 1993/94.

• Member, Pasukan Kadet PEMADAM Negeri Johor, 1993.

• Member, Persatuan Pengguna Negeri Johor (JCA), Johor Bahru Branch, 1992.

• Member, Koperasi Universiti Teknologi Malaysia, 1987 to 1992. 10.0 COURSES ATTENDED

• MyTRIZ Conference & Workshops 2012, 6 – 9 November 2012, Organised by MyTRIZ Association & Intel Co. Ltd, Penang.

• Workshop on “Assessor Training for Programme Accreditation”, 27 – 29 July, 2009, Organised by Malaysian Qualification Accreditation (MQA), Kuala Lumpur.

• Bengkel Pemurniaan bagi KKTM Balik Pulau, Pulau Pinang, 13 – 15 October 2008, Organised by MARA and German Malaysian Institute (GMI), Kolej Kemahiran Tinggi MARA (KKTM), Balik Pulau, Penang.

• National Conference on “Design and Concurrent Engineering 2006 (DECON 2006)”, 9 – 10 August 2006, Organised by Fakulti Kejuruteraan Pembuatan, Kolej Universiti Teknikal Kebangsaan Malaysia (KUTKM), Malacca.

• Workshop on “Teaching and Learning Colloquium Regional”, 13 May 2006, Organised by Open University of Malaysia (OUM), PPW Johor.

52

• Workshop on “Penasihat Kurikulum bagi Diploma Teknologi Pembuatan Acuan”, 15 – 18 February 2006, Organised by Bahagian Pendidikan & Latihan (Kemahiran) MARA, Petaling Jaya, Selangor.

• Course on “Penerapan Kemahiran Generik di Kalangan Pelajar UTM Tahap II”, 6 – 7 December 2005, Organised by Center of Teaching and Learning (CTL), UNIPEN, UTM Skudai, Johor

• National Seminar on “Komputeran Industri”, 24 September 2005, Organised by Fakulti Teknologi dan Sains Maklumat, UKM, Bangi, Selangor.

• Workshop on “Penasihat Kurikulum bagi Diploma Teknologi Pembuatan Acuan”, 13 – 15 September 2005, Organised by Bahagian Pendidikan & Latihan (Kemahiran) MARA, Petaling Jaya, Selangor.

• Workshop on “Pengajaran Berasaskan Hasil”, 13 July 2005, Organised by FKM, UTM Skudai, Johor.

• Course on “Pengajaran Menggunakan Teknologi”, 21 – 22 June 2005, Organised by Center of Teaching and Learning (CTL), UNIPEN, UTM Skudai, Johor.

• Workshop on “Perancangan Strategik dan Kurikulum Program Sarjana Teknologi Pembuatan Termaju dan Kursus Baru Sarjana Kejuruteraan Industri”, 6 – 8 June 2005, Organised by Jabatan Kejuruteraan Pembuatan dan Industri, FKM, UTM, Century Mahkota Hotel Melaka.

• Teaching and Learning Roadshow, 11 December 2004, UTM Skudai Johor.

• Course on “Penilaian Tahap Kecekapan Skim Pendidikan DS45/TK4”, 19 October – 2 November 2004, Organised by UNIPEN, UTM Skudai, Johor.

• Workshop on “Kurikulum dan Kemahiran Asas”, 12 August 2004, Organised by FKM UTM, Fakulti Kejuruteraan Mekanikal, UTM Skudai.

• Workshop on “Sistem Penasihatan Akademik”, 17 – 18 May 2004, Organised by FKM UTM, Fakulti Kejuruteraan Mekanikal, UTM Skudai.

• Workshop on “Tutor Traning”, 14 - 15 December 2003, Organised by Open University of Malaysia (OUM), PPW Johor.

• Workshop on "7 Habits of Highly Effective People", 15 – 18 June 2003, Organised by UTM, Desaru Perdana Resort, Kota Tinggi, Johor.

53

• Workshop on "Penyelidikan : Ke arah Universiti Bertaraf Antara bangsa", 21 – 22 August 2002, Organised by UTM, Hyatt Regency Hotel, Johor Bahru, Johor.

• Course on "Pengurusan Stress", 16 – 17 April 2002, Organised UTM and Budiman Research Consultant, Hyatt Regency Hotel, Johor Bahru, Johor.

• Course on "Komunikasi & Kemahiran Interpersonal", 15 - 16 January 2002, Organised by UTM and Noridah Consultant, Grand Bluewave Hotel, Johor Bahru, Johor.

• Course on "E-Learning", 31 October - 1 November 2001, UTM Skudai, Johor.

• "Kursus Pemahaman Islam", 8 & 9 November 2001, Organised by Badan Kebajikan Islam MOTOROLA, BTN Bumi Jati Camp, Selangor.

• Short Course on "Programmable Logic Controller (PLC)", 20 August 2001, FESTO (Johor Branch), Johor Bahru.

• Long-Term Training Programme "Hitachi Fellowship for Research in Japan", 7 August 2000 - 6 February 2001 at University of Tokyo, Japan.

• Short Course on "Low Cost Flip Chip Processing and Analysis with Hands-on Applications", 19 & 20 January 2000, Georgia Institute of Technology, Atlanta, USA.

• "Bengkel Penilaian Kelulusan, Tahap Minimum dan Perakuan Akreditasi Bil 7/2000", 31 May 2000, Dewan Al-Ghazali, Masjid Sultan Ismail, UTM, Skudai, Johor.

• Course on "Computer-Integrated Manufacturing System (CIMS)", 22 - 26 November 1999, Production Laboratory, FKM, UTM, Skudai, Johor.

• "Konvensyen Pendidikan UTM 1999", 10 November 1999, Kompleks Dewan Kuliah Blok N24, UTM, Skudai, Johor.

• Workshop on "Pengurusan Penilaian Prestasi Staf UTM", 13 & 14 October 1999, Dewan Jamuan, Bangunan Pentadbiran UTM, Skudai, Johor.

• Workshop on "Induksi Pengajaran Program Khas Pensiswazahan Guru (PKPG)", 6 - 8 September 1999, Hotel Rasa Sayang, Johor Bahru, Johor.

• Course on "Effective Supervision and Thesis Examination", 9 - 10 June 1999, UTM, Skudai, Johor.

54

11.0 ACADEMIC & SERVICE AWARDS

• Hitachi Fellowship Award by Hitachi Scholarship Foundation (HSF), Japan, August, 2000 - February, 2001.

• Excellency Service Awards by UTM, 1999.

• Academic Award for Doctor of Philosophy (Ph.D) by UTM/JPA, 1993 -1997.

• Academic Award for Master in Philosophy (M.Phil) by UTM/JPA, 1989 - 1991.

12.0 OTHER CONTRIBUTIONS

• Task : Advisor of Education Program : Bakti Siswa Kertih `99 Division : Kolej Tun Hussein Onn Date : 27 May - 3 June, 1999

• Task : Co-ordinator Program : CIM Presentation by Principal of Amatrol Pte. Ltd Division : Faculty of Mechanical Date : 7 January, 1999

• Task : Member of Organising Committee (Departmental Level)

Program : Galeri UTM `98 Division : Faculty of Mechanical Date : 1 - 28 December, 1998

• Task : Co-ordinator Program : Presentation on "Machining" by Prof. Y. Kakino Division : Faculty of Mechanical Date : 10 December, 1998

• Task : Advisor Program : Academic Camping Course

Participant : Student Year 1KS Division : Kolej Tun Hussien Onn Date : 28 - 29 November, 1998

• Task : Advisor Program : Academic Camping Course

Participant : Student Year 1SMP Division : Faculty of Mechanical

55

Date : 15 - 16 August, 1998

• Task : Fellow Division : Kolej Tun Hussien Onn Date : 1 May, 1998 - 30 June, 1999

• Task : Member of Committee Division : Seminar/Colloqium Committee Faculty of Mechanical Engineering

Date : 14 February, 1998 - 13 February, 2000

• Task : Fellow Division : Resak Students Village Date : 1 June, 1992 - 25 December, 1993

• Task : Director of Food and Drink Supply Program : Students Orientation Week Division : Resak Students Village

Date : 26 June – 2 July, 1993

• Task : Facilitator Program : Seminar dan Pameran Kesedaran Penyalahgunaan

Dadah Date : 30 July, 1993

• Task : Member of Committee (Production Panel) Division : Committee of Projek Sarjana Muda (PSM), Faculty

of Mechanical Engineering Date : 1992 - 1993

• Task : Member of Organising Committee (Accommodation)

Program : 2nd. National Seminar on Electron Microscope, Faculty of Mechanical Engineering

Date : 1992

• Task : Chairman (Faculty of Mechanical Engineering) Program : Hari Keluarga UTM Date : 1992

• Task : Member of Organising Committee (Refreshment) Program : Hari Keluarga Pejabat Hal-Ehwal Pelajar Date : 1992

• Task : Secretary Program : Committee of Penerapan Nilai-Nilai Islam (JAPNI),

Faculty of Mechanical Engineering

56

Date : 1992

• Task : Assessor Program : Mengarang Esei dan Cerpen Division : Meranti Students Village

Date : 19 Jan – 20 Feb, 1992

• Task : Member of Committee Division : Penerbitan Akademik Universiti

Date : 1991 - 1993

• Task : Chairman Division : Penerbitan Akademik Fakulti

Date : 1991 - 1993

• Task : Fellow Division : Meranti Students Village From : 1 June, 1991 - 31 May, 1992

• Task : Chairman of Accommodation and Food Committee

Program : Muzakarah Faculty of Mechanical Engineering Date : 1991

• Task : Member of Committee for Seminar Equipments Program : Minggu Sains & Teknologi, Faculty of Mechanical Engineering Date : 1991

• Task : Member of Panel Program : Fellow Camping Program


• Task : Fellow Division : Resak Students Village Date : 1 June, 1988 - 31 August, 1989

• Task : Member of Committee Program : Committee of Penerapan Nilai-Nilai Islam (JAPNI),

Faculty of Mechanical Engineering Date : 1987-1989

• Task : Fellow Division : Kolej Kedua, Taman Sri Keramat, Kuala Lumpur

Date : 1 April, 1988 - 31 May, 1988

• Task : Director of Reception

57

Program : Kursus Kepimpinan Pensyarah, Faculty Kejuru-teraan Jentera

Date : 1988

• Task : Member of Organising Committee Program : Kursus Bina Semangat, Faculty of Mechanical

Engineering Date : 1988

• Task : Fellow Division : Kolej Ketiga, Ulu Kelang, Kuala Lumpur Date : 1 July, 1987 - 31 March, 1988

• Task : Member of Organising Committee Program : Seminar Penggunaan CAD/CAM dalam Keju-

ruteraan Jentera Date : 1987

• Task : Fellow Division : Asrama Kolej Pertama Date : 1 March, 1987 - 31 June, 1987

• Task : Member of Organising Committee Program : Seminar Penggunaan CAD/CAM dalam Industri

Pembuatan Date : 1987

• Task : Member of Organising Committee Program : Jawatan Kuasa Penyediaan Kertas Kerja untuk

Kursus Diploma Teknologi Pembuatan, Faculty of Mechanical Engineering

Date : 1987

resume - web1.fkm.utm.myweb1.fkm.utm.my/userfiles/file/cv staf academic new...3 • name of position...

Documents