aco product catalogue 2007 - pre.ptpre.pt › eurotubo › pdf › produtos › canais para...
TRANSCRIPT
ACO Product catalogue 2007Shower Channels, FlexDrain
2
The Shower Channel is an easy to install andaesthetically attractive discharge channel forshower locations.Because of the shallow depth and varyinglengths the shower channel is suitable for usein new or refurbished projects.As the discharge from the Shower Channel isjust one way, this makes the tile work easier.
If the Shower Channel is installed at the frontof the shower it will function as a barrieragainst ingress of water whilst maintaining a threshold free access.If the channel is installed with a dividable gra-ting then this can be placed under the showerdoor.
Shower Channel Advantages• Aesthetically attractive• Less tile cutting• Simplified outlets• Easy to maintain• Low installation costs• Removable foul air trap
ACO Stainless Steel Shower Channel
Practical and Attractive go well together
Characteristics:• Cross grade for a better water drain• Polished surface• Special foul air trap (P-trap)• Self cleaning• Flow rate up to 1 l/sec.• Telescopic and 360° rotatable trap
• Available with different gratings• Flange for isolation• Adjusting screws for easy installation• Silt basket• Low installation depth
Executive Line
P-trap
Wave Grate Water GrateGrate with Long Holes
Flower Grate Grate with Square Holes
NEW
3
Shower channel with P-trap
ACO Stainless Steel Shower Channel
Executive Line
All materials are 304 stainless steel
Length Grating for Executive line
L (mm) shower channels
1 grate
478 405806
578 405807
678 405808
778 405809
878 405810
978 405811
1078 405812
1178 405813
Length Shower channel
L (mm) with P-trap,
without grate
485 405766
585 405767
685 405768
785 405769
885 405770
985 405771
1085 405772
1185 405773
70L
70L
70L
70L
13,5 Ø50
ERRATAPlease correct page 15 in the product catalogue Sanitary products.
Length Grating for Executive line
L (mm) shower channels
1 wave grate
478 405790
578 405791
678 405792
778 405793
878 405794
978 405795
1078 405796
1178 405797
Length Grating for Executive line
L (mm) shower channels
1 grate with square holes
478 405798
578 405799
678 405800
778 405801
878 405802
978 405803
1078 405804
1178 405805
NEW
4
ACO Stainless Steel Shower Channel
Executive Line
Length Grating for Executive line
L (mm) shower channels
1 water grate
478 405774
578 405775
678 405776
778 405777
878 405778
978 405779
1078 405780
1178 405781
Length Grating for Executive line
L (mm) shower channels
1 flower grate
478 405782
578 405783
678 405784
778 405785
878 405786
978 405787
1078 405788
1178 405789
70L
70L
NEW
5
Characteristics:• Removable stainless steel foul air trap• With or without flange for isolation• 3 part gratings for under door installation
• 3 different kinds of gratings• Set - channel, grate and foul air trap
available under one article number• Low foul air trap
ACO Stainless Steel Shower Channel
Comfort Line
Part grating section
Concrete Ties Shower channel Installation - 90° angleShower channel Installation
Gully with plastic foul air trap Earthing Point
Shower channel
6
Shower channel with stainless steel foul air trap
ACO Stainless Steel Shower Channel
All materials are 304 stainless steel
Length Shower channel with stainless steel
L (mm) foul air trap, flange for isolation
1 grate 3 grates
485 403797 403805
585 403798 403806
685 403799 403807
785 403800 403808
885 403801 403809
985 403802 403810
1085 403803 403811
1185 403804 403812
Length Shower channel with stainless
L (mm) steel foul air trap
1 grate 3 grates
485 402738 403780
585 402739 403781
685 402740 403782
785 402741 403783
885 402742 403784
985 402743 403785
1085 402744 403786
1185 402745 403787
100 Ø
50
70L
13,510
0 Ø50
70L
13,5
70
100 Ø
50
L
20
70
100 Ø
50
L
20
ERRATAPlease correct page 15 in the product catalogue Sanitary products.
Length Shower channel with stainless steel
L (mm) foul air trap and flange for isolation
1 wave grate
485 404483
585 404484
685 404485
785 404486
885 404487
985 404488
1085 404489
1185 404490
Length Shower channel with stainless steel
L (mm) foul air trap and grate with square holes
1 grate 3 grates
485 404507 404515
585 404508 404516
685 404509 404517
785 404510 404518
885 404511 404519
985 404512 404520
1085 404513 404521
1185 404514 404522
7
Length Shower channel decrease version with
L (mm) stainless steel foul air trap and socket
1 grate 3 grates
485 405750 405742
585 405751 405743
685 405752 405744
785 405753 405745
885 405754 405746
985 405755 405747
1085 405756 405748
1185 405757 405749
70
60
L
20 Ø50
ACO Stainless Steel Shower Channel
All materials are 304 stainless steel
Length Shower channel with stainless steel foul air trap,
L (mm) flange for isolation and grate with square holes
1 grate 3 grate
485 404491 404499
585 404492 404500
685 404493 404501
785 404494 404502
885 404495 404503
985 404496 404504
1085 404497 404505
1185 404498 404506
100 Ø
5070
L
13,5
8
ACO Stainless Steel Shower Channel
All materials are 304 stainless steel
Shower channel with plastic foul air trap
Length Shower channel with plastic
L (mm) foul air trap
1 grate
485 405597
585 405598
685 405599
785 405600
885 405601
985 405602
1085 405603
1185 405604
Length Shower channel with plastic
L (mm) foul air trap
1 wave
grate
485 404363
585 404364
685 404365
785 404366
885 404367
985 404368
1085 404369
1185 404370
Length Shower channel with plastic
L (mm) foul air trap
1 grate with
square holes
485 405605
585 405606
685 405607
785 405608
885 405609
985 405610
1085 405611
1185 405612
Length Shower channel with plastic
L (mm) foul air trap and flange
1 wave grate
485 404371
585 404372
685 404373
785 404374
885 404375
985 404376
1085 404377
1185 404378
100
Ø40
70L
20
70
100
Ø40
L
20
70
100
Ø40
L
20
100
Ø40
70L
13,5
9
All materials are 304 stainless steel
ACO Stainless Steel Shower Channel
Shower channel without foul air trap
Ø50
70L
20
Ø50
70L
20
Length Shower channel without
L (mm) foul air trap
1 grate
485 403006
585 403007
685 403008
785 403009
885 403010
985 403011
1085 403012
1185 403013
Length Shower channel without
L (mm) foul air trap
3 grates
485 403014
585 403015
685 403016
785 403017
885 403018
985 403019
1085 403020
1185 403021
10
Head of water (mm)
)s/l( etar wo lF
Shower channel decrease version
St andard channel
0
0,1
0,2
0,3
0,4
0,5
0,6
0,7
50403020100
Comfort Line
)s/l( etar wolF
0,0
0,20
0,40
0,60
0,80
1,00
1,20
Head of water (mm)30,025,020,015,010,05,00,0
Exclusive Line
Head of water (mm)
)s/l( etar wolF
Shower channel decrease version
0,0
0,05
0,10
0,15
0,20
0,25
0,30
0,35
0,40
0,45
30,025,020,015,010,05,00,0
St andard channel
Comfort Line decrease version
ACO Stainless Shower ChannelFlow rates
11
1. Before installing the shower channel,please remove the gratings in order toavoid damage. Further protection is af-forded by applying adhesive tape to theedge of the shower channel.
2. Make sure that no impurities (mortar, etc.)can get into the shower channel duringassembly and installation work. We recom-mend that it is temporarily covered duringthese processes.
3. We recommend to use the emery paperto roughen the side and bottom sectionsof the shower channel, then use degreas-ing agent to achieve better adhesion tothe floor materials.
4. Connect the channel to the waste pipemaking sure that the pipe is inserted asfar as possible (regardless of the pipetype – whether PVC, PE or PP).
5. If required ground the channel by connect-
ing the grounding conductor to thegrounding point of the drainage body.
6. Level the channel with the help of the ex-tension brackets (fasten these bracketswith screws) or install the channel in mor-tar.
7. Fill in the space under the channel andaround it with cement mortar, taking intoaccount the thickness of the tiles.
8. While laying the tiles, it is necessary tomake sure that the gradient in the showerarea is always directed towards the show-er channel. Place the tiles at least 1 to 2mm higher than the upper side of theshower channel edge, in order to avoidpooling along the channel.
9. After tiling, seal the tiles to the channelwith a silicon sealant, complying with therecommendations of the manufacturer.For best results, make sure the silicon
joint has the same width and colour asthe joint between the tiles.
10. Remove any cement or jointing agentresidue carefully with the help of a plasticwool/sponge.
11. Remove the protective film from the grat-ing then install the grating back into thechannel.
Cleaning and maintenanceStainless steel is vulnerable to scratches.When cleaning, do not use sharp or abrasivematerials. Use common household detergentsfor bathrooms or specialist cleaning agents forstainless steel. The shower channel does notrequire any special maintenance, but we rec-ommend that you remove regularly the foul airtrap to check the drainage body for contamina-tion and to remove any possible impurities.
Important!
The shower channel can be installed in newlyconstructed buildings as well as renovationprojects. It is necessary to prepare sufficientspace in the floor for the body of the showerchannel and the waste pipe. The showerchannels are available in various standard
lengths so that it is possible to select themost suitable product for a given application.Channels are available in designs with sec-tioned gratings to facilitate installation undershower doors.
1. The off-take capacity of the channel is notonly determined by the capacity of the actu-al channel itself, but also the waste pipe towhich these elements are to be connected. Please adhere to the following instructions:• The length of the waste pipeline to thevertical waste stack of the system must beas short as possible;• Avoid bends in the system where possible;• Make sure that the waste pipe has a suffi-
cient gradient for the discharge required;• The diameter of the waste pipeline mustbe at least 50 mm (or 40mm by plastic FAT).
2. The capacity of the shower channel is ap-proximately 20 l/min (tested according toEN1253), which is more than sufficient fora majority of shower types. If the showerchannel is used for multiple showers or forshowers with a higher capacity please con-tact your supplier.
3. Select a Showerchannel length so that it
can be placed between the walls withoutany additional tiles. The shower channelcan be placed both in the rear of the show-er area or to the front, the former optiontends to be preferred.
4. If the shower channel is installed under theshower door, it is necessary to use of theshower channel with a sectioned grating sothat removal is possible.
Necessary materials• Self-adhesive tape;• Spirit level;• Emery paper;• Degreasing agent;• Silicone sealant
Installation instructions
Where is it possible to use the ACO shower channel?
Assembly
ACO Stainless Steel Shower Channel
12
ACO FlexDrain
50
Ø75
90L
20
50
Ø75
90L
20
50
Ø75
90L
13,5
50
Ø75
90L
13,5
ACO Stainless Steel Shower Channel
Length Shower channel
L (mm) telescopic
1 grate
485 404531
585 404532
685 404533
785 404534
885 404535
985 404536
1085 404537
1185 404538
Length Shower channel
L (mm) telescopic
3 grates
485 404539
585 404540
685 404541
785 404542
885 404543
985 404544
1085 404545
1185 404546
Length Shower channel
L (mm) telescopic
1 grate
485 404384
585 404385
685 404386
785 404387
885 404388
985 404389
1085 404390
1185 404391
Length Shower channel
L (mm) telescopic
3 grates
485 404523
585 404524
685 404525
785 404526
885 404527
985 404528
1085 404529
1185 404530
13
ACO Stainless Steel Shower Channel
ACO FlexDrain Gully
ACO FlexDrain Gully Tops
Product AxB Loading Grate H Part Nr.class (mm) AISI 304
Gully top 150x150 K perforated -brushed 30 404428domestic standard 150x150 K perforated - polished 30 404429
200x200 K perforated -brushed 30 404430200x200 K perforated - polished 30 404431
Gully top 150x150 K blasted 34 404434domestic design, 150x150 K for tiles 34 404436with flange 200x200 K blasted 34 404455
200x200 K for tiles 34 404456300x300 K blasted 34 404459300x300 K for tiles 34 404460
Gully top 150x150 K perforated 12 404123professional standard 200x200 K perforated 12 404124Gully top 150x150 K perforated - 6mm 22 404437professional sport 150x150 L perforated - 6mm 22 404438
150x150 L perforated - 15mm 22 404439200x200 K perforated - 6mm 22 404443200x200 L perforated - 6mm 22 404444200x200 L perforated - 15mm 22 404445300x300 K perforated - 6mm 22 404449300x300 L perforated - 6mm 22 404450300x300 L perforated - 15mm 22 404451
Gully top 150x150 K perforated - 6mm 22 404440professional sport 150x150 L perforated - 6mm 22 404441with flange 150x150 L perforated - 15mm 22 404442
200x200 K perforated - 6mm 22 404446200x200 L perforated - 6mm 22 404447200x200 L perforated - 15mm 22 404448300x300 K perforated - 6mm 22 404452300x300 L perforated - 6mm 22 404453300x300 L perforated - 15mm 22 404454
Gully top 200x200 L mesh - antislip 65 404638industrial 200x200 L mesh 65 404639
200x200 L perforated 65 404640200x200 L cover 65 404641200x200 L perforated 65 404642200x200 L perforated 65 404643200x200 M ladder 65 404644200x200 M slot cover 65 404645250x250 L mesh - antislip 65 404646250x250 L mesh 65 404647250x250 L perforated 65 404648250x250 L no grate - cover 65 404649250x250 L perforated 65 404650250x250 L perforated 65 404651250x250 M ladder 65 404652250x250 M slot cover 65 404653300x300 L mesh - antislip 65 404654300x300 L mesh 65 404655300x300 L perforated 65 404656300x300 L no grate - cover 65 404657300x300 L perforated 65 404658300x300 L perforated 65 404659300x300 M ladder 65 404660300x300 M slot cover 65 404661
Product DN DN 2 Part Nr.(mm) (mm)
Plastic gully 75 50 403921Plastic gully with flange 75 50 404682
Product DN 1 Part Nr.(mm) AISI 304
Foul air trap 75 404143
DNDN
2
Ø75
AxB
Ø75
AxB
Ø75
AxB
Ø75
AxB
Ø75
AxB
Ø75
AxB
DN
DN2
14
Notes
AACCOO IInndduussttrriieess kk..ss..
582 22 PřibyslavHavlíčkova 260Tel.: +420 569 491 111Fax: +420 569 482 529www.aco.cze-mail: [email protected] republic
© ACO Industries k.s. All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made withoutguarantee since the conditions of use are beyond the control of the Company. It is the customer’s responsibility to ensure that each product is fit for its intended purpose and that the actualconditions of use are suitable. This brochure and any advice is provided ACO Industries k.s. (the company) free of charge and accordingly on terms that no liability (including liability fornegligence) will attach the Companyor its servants or agents arising out of or in connection with or in relation to this brochure or any such advice. Any goods supplied by the Company will besupplied solely upon its standard conditions of sale, copies of which are available on request. The Company’s policy of continuous product development and improvement renders specificationsliable to modification. information provided in this brochure is therefore subject to change without prior notification.
1306
/IC
Show
er c
hann
els/
En/1
1/06
/JL
S
ubje
ct t
o te
chni
cal c
hang
es w
ithou
t no
tice