for distribution automationthibidivina.com/uploads/userfiles/file/ftu-200 catalog...
TRANSCRIPT
www.pnctech.co.kr
for Distribution Automation
FTU-P200Pole-mounted Load Break Switch Control
FTU-R200Automatic Circuit Recloser Control
FTU (FeederTerminalUnit)
FTU
(FeederTerminalUnit)
Our high technology doesn’t allow even 1% tolerance of error.
P&C Technologies is a company that creates an increasingly convenient world as it is a group of technology specialists who pursue innovations for human comfort and who are geared towards service maintenance, upholding clients and proven safety through impeccable verification and testing, and creating reliable state-of-the-art digital technological powers.
Our system and products guarantee the superiority of P&C Technologies.
P&C Technologies, equipped with outstanding personnel and an impeccable quality system, is growing rapidly in an intensive period of time by supplying FTU, Numerical protection relay and substation mRTUs to the KEPCO.
Contents04 Introduction, Key Features / 05 Features / 07 Technical Data / 10 General Specifications
11 Communication Interface / 12 Outline & Dimension, Enclosure Dimensional Drawings
13 FTU Interface Connectors, Construction / 14 External Connections
15 Various types of Device for Distribution Automation
FTU-200 series
FTU-200 series (Feeder Terminal Unit)04
FTU is a remote terminal unit for distribution automation which controls and monitors switches on the distribution lines such as Load Break Switch, Recloser, or RMU (Ring Main Units) and measures various electrical quantities of the line and transmits data to control center through remote communication. FTU-200 series are the advanced terminal units which were upgraded from FTU-100 series equipped with more functions and multiple protocols support and enhanced hardware platform.
• Integrated multi-functions on new microprocessor based platform - Fault detection & Protection, Metering, Control, Status monitoring, Power quality monitoring.
• Directional protection, Negative sequence protection, SEF and lots of built-in over-current protection curves including IEC, ANSI/IEEE, Recloser curves and customized curves.
• 4 setting groups and automatic setting group change function.
• 4 quadrants energy metering & load profiling.
• Multi-port, multi-protocol communication support (DNP3.0, DNP3.0 over TCP/IP, IEC60870-5-101/104), modem control & dial-up function for SCADA.
• DNP3.0 subset level 3 with information index mapping & class assignment.
• Built-in protocol monitor for integrating FTU with DAS system.
• Large size memory for load profiling, event and fault recording. Available Disturbance waveforms with COMTRADE format.
• Configurable digital inputs and outputs.
• Intelligent power supply & battery charger with built-in self-diagnosis & test function. - Easy maintenance through separated module design with simple CAN interface.
• IP54 enclosure for mounting on the pole-top
• Type tested in accordance with IEC60265-1 and IEEE Std. C37.60
• Customized supports for special user-required functions and firmware upgradable at site.
Introduction
Key Features
FTU-P200 Pole-mounted Load Break Switch Controller
FTU-R200 Automatic Circuit Recloser Controller
P&C TECHNOLOGIES CO., LTD. 05
• Integrated multi-functions on new microprocessor based platform - Fault detection & Protection, Metering, Control, Status monitoring, Power quality monitoring.
• Directional protection, Negative sequence protection, SEF and lots of built-in over-current protection curves including IEC, ANSI/IEEE, Recloser curves and customized curves.
• 4 setting groups and automatic setting group change function.
• 4 quadrants energy metering & load profiling.
• Multi-port, multi-protocol communication support (DNP3.0, DNP3.0 over TCP/IP, IEC60870-5-101/104), modem control & dial-up function for SCADA.
• DNP3.0 subset level 3 with information index mapping & class assignment.
• Built-in protocol monitor for integrating FTU with DAS system.
• Large size memory for load profiling, event and fault recording. Available Disturbance waveforms with COMTRADE format.
• Configurable digital inputs and outputs.
• Intelligent power supply & battery charger with built-in self-diagnosis & test function. - Easy maintenance through separated module design with simple CAN interface.
• IP54 enclosure for mounting on the pole-top
• Type tested in accordance with IEC60265-1 and IEEE Std. C37.60
• Customized supports for special user-required functions and firmware upgradable at site.
Hardware
RTU • Dual Processor : ARM9 (96MHz) + DSP (TMS320C6713) • 16-bit A/D converter • Non-volatile memory : FRAM(1 Mbytes), Flash ROM (2 Mbytes) • HMI : LCD 20 characters * 4 lines with LED backlight, Buttons, LEDs • 10 Contact inputs, 4/6 Digital Outputs (Electrical isolation) : Configurable • 2 channel 4~20mA TD inputs • RS232C, ETHERNET, RS232C/RS485
Controller • Battery charger with test circuit • Power supply for FTU and modem • LBS Motor driving • CAN interface
Control box • Step down transformer (AC220V/30V) • Lead acid battery (12V*2, 35Ah, 18Ah-Standard) • Modem space • IP54
Main functions
Metering • 128 Samples per cycle • Galvanic isolation through Aux. CT & Aux. PT • Secondary of 1000:1 CT ~ 12.5A, Up to 200% of rated voltage • Currents(A,B,C,N), Voltages(A,B,C/R,S,T) : RMS, Phasors, Sequence components, Harmonics • Power : Apparent(kVA), Active(kW), Reactive(kVar), Power factor • Energy : 4-quadrant metering, import / export active energy, inductive / capacitive reactive energy. • Frequency • Demand Profile • Report value by deadband
Status monitoring • 10 Contacts input : Open, Closed, Lock, Gas low, Door open, etc. - Opto-isolation - Delay timers for de-bouncing of each contact input - Configurable : Name, Interlock condition, Inverted status • Controller status (battery & battery charger test result) - External AC power loss - Battery low, Battery Fail, Battery overvoltage, Battery Charger Fail, Grounded battery - Battery voltage • Control Status - Operator place : Local/Remote - Control Lock - Recloser On/Off, Protection On/Off, Ground Protection On/Off Function Status - Fault indicators, PQM status, Live Line(source, load side), Phase sync., Reclosing status - Under voltage status, Under frequency status, Self-diagnostics status, etc. - Analog Hi/Low alarm
Control • 4 contacts output, 2 high-speed outputs - Open(Trip), Close, Spares - Configurable : Name, Pulse width
Features
FTU-200 series
FTU-200 series (Feeder Terminal Unit)06
• Switch Control - Operator place : Remote, Local (Front Panel/PC Tool) - Interlocks : Control Lock, Gas low, Mechanical Lock, Current Switch status - Close interlock conditions (Selective) : Live load, Phase sync. fail • SBO (Select before Operate) - Secure switch operation - SBO timeout (settable) • Auto reclosing - Recloser On/Off - Protection On/Off - Ground protection On/Off • Battery Test, Reset Indicators
Protection • Fault passage indicator • 3-stage over current protection (directional or non-directional) - Fast and delayed TC trip elements for phase and earth fault - 54 types of built-in TC Curves (IEC, ANSI, Recloser curves) and 4 Customized TC Curves - Definite time over-current element - Definite time HCT (High Current Trip) • Negative sequence over-current protection • SEF(Sensitive earth fault) detection • Cold load protection(pickup adjustment) • Magnetizing inrush restraints • Sequence coordination • Open line detection • Phase sync. fail detection • Over voltage, under voltage, under /over frequency • Auto reclosing (up to 4 shots) • Auto sectionalizing • 4 setting groups, automatic setting group change depending on power flow Power quality monitoring • Sag, Swell, Interruption Detection - Status - Events : Time-stamp, Magnitude, Duration - Counters : Statistics for each phase, duration classified by IEEE 1159. - Accumulated interruption time - Waveform recording on events • Harmonics - THD (Total harmonic distortion) - Each components up to 31th harmonics - Events by threshold setting, Counter Event/Fault Recording • SOEs are stored on non-volatile memory with 1ms time-stamp • Event history buffers are categorized by group - I/O Events, Function Events, System Events - Fault current Events - PQM Events - Demand I,P,Q - Daily Max. I,P,Q - Counter : Switch open, Fault, Restart - Memory size : 1Mbytes • Fault waveform recording - 8 faults, 6 PQM waveforms can be stored on non-volatile memory - 1 Manual triggered waveform - 128 samples/cycle, 20 cycles - Waveforms are stored as COMTRADE file format through PC maintenance software - Memory size : 2 Mbytes
Phasor diagram of SEF
Parameters of TC curve
A : Basic CurveB : After Time Multiplier is appliedC : After Time Adder is appliedD : After Min. Response Time is applied
A
B
C
Time[sec]
Current[A]
D
3loOp Current
Operated
Non-Op
Min Torque Angle
Angle (+30°)
Max Torque Angle
-3VO
P&C TECHNOLOGIES CO., LTD. 07
Communication • Supports DNP3.0 Subset level 3, DNP over TCP/IP • IEC60870-5-101, 104 • Index mapping & class assignment • Modem control • Unsolicited Dial-Up • Built-in protocol monitor
Auxiliary functions • Self-diagnosis • CAN interface with controller • PC software for setting & maintenance • Waveform evaluation software • Firmware upgradable at site
Typical Application
Typical application example of FTU-P200
Phase Fault
• FTU-P200 - Pickup Level : 10~900A (step: 1A)- Detection Time : 0.02~10.00 sec (step: 0.01 sec)
• FTU-R200 - Pickup Level : 10~900A (step: 1A)- Fast TC Curve : 54 types (ANSI, IEC, Recloser)- Fast Multiplier : 0.10~2.00 (step: 0.01)- Fast Adder : 0.00~1.00 sec (step: 0.01 sec)- Fast Min Response Time : 0.00~1.00 sec (step: 0.01 sec)- Time-delayed TC Curve : 54 types (ANSI, IEC, Recloser)- Time-delayed Multiplier : 0.10~2.00 (step: 0.01)- Time-delayed Adder : 0.00~1.00 sec (step: 0.01 sec)- Time-delayed Min Response Time : 0.00~1.00 sec (step: 0.01 sec)
Earth Fault
• FTU-P200 - Pickup Level : 3~900A (step: 1A)- Detection Time : 0.02~10.00 sec (step: 0.01 sec)
• FTU-R200 - Pickup Level : 5~900A (step: 1A)- Fast TC Curve : 1~48 (step: 1)- Fast Multiplier : 0.10~2.00 (step: 0.01)- Fast Adder : 0.00~1.00 sec (step: 0.01 sec)- Fast Min Response Time : 0.00~1.00 sec (step: 0.01 sec)- Time-delayed TC Curve : 1~48 (step: 1)- Time-delayed Multiplier : 0.10~2.00 (step: 0.01) - Time-delayed Adder : 0.00~1.00 sec (step: 0.01 sec)- Time-delayed Min Response Time : 0.00~1.00 sec (step: 0.01 sec)
Technical Data
Fault Detection & Protection
Example of waveform evaluation
FTU-200 series
FTU-200 series (Feeder Terminal Unit)
Under voltage • Pickup Level 0.30~0.95 pu (step : 0.01pu)
• Delay time 0.1~180.0 sec (step : 0.1sec)
Cold Load Pickup/Inrush Restraint
• FTU-P200 - Cold Load Phase Pickup Multiplier : 1.0~5.0 (step : 0.1)- Cold Load Time Duration : 0~60 min (step : 1 min)- Inrush 2nd Harmonic Level : 5~50% (step : 1%)- Phase, Earth, SEF, NPS Inrush Block : 1 (yes) / 0 (no)
• FTU-R200 - Cold Load Phase Pickup Multiplier : 0~10 (step : 1)- Cold Load Earth Pickup Multiplier : 0~10 (step : 1)- Cold Load Time Duration : 0.00~60.00 sec (step : 0.01sec)- Restore Pickup Time : 0.00~30.00 sec (step : 0.01sec)- Inrush 2nd Harmonic Level : 5~50% (step : 1%)- Inrush Detection Time : 0.02~1.00 sec (step : 0.01 ec)- Phase, Earth, SEF Inrush Block : 1 (yes) / 0 (no)
Direction Detection• 3V1 threshold 0~100%(step : 1%)
• 3I1 threshold 0~100%(step : 1%)
• 3I1 Max. torque angle 0~355° (step : 5°)
• 3Vo threshold 0~100%(step : 1%)
• 3Io threshold 0~100%(step : 1%)
• 3Io Max. torque angle 0~355° (step : 5°)
High Current Trip (HCT) (FTU-R200) • Phase - HCT Pickup Level 100~1500% (step : 1%)
• Phase - HCT Adder 0~100%(step : 1%)
• Earth - HCT Pickup Level 100~1500% (step : 1%)
• Earth - HCT Adder 0.00~1.00 sec (step : 0.01sec)
Negative phase sequence(NPS) Overcurrent• I2 Pickup Level 10~900A (step : 1A)
• Detection Time 0.00~1.00 sec (step : 0.01sec)
Sensitive Earth Fault (SEF)
• Pickup - 3Io : 0.1~20.0A (step : 0.1A)- 3Vo : 10~80% (step : 1%) of rated voltage
• Maximum Torque Angle 0~345° (step : 15°)
• Detection Time 0.1~30.0 sec (step : 0.1sec)
Over voltage• Pickup Level 1.05~1.50 pu (step : 0.01pu)
• Delay time 0.1~180.0 sec (step : 0.1sec)
Under frequency• Pickup Level 47.00~59.98 Hz (step : 0.01Hz)
• Delay time 0.03~10.00 sec (step : 0.01sec)
Over frequency • Pickup Level 52.02~63.00 Hz (step : 0.01Hz)
• Delay time 0.03~10.00 sec (step : 0.01sec)
Phase Synchronism Check
• Sync Fail Phase Difference 5~60° (step: 1°)
• Delay Time 0.1~30.0 sec (step: 0.1sec)
Reclosing(FTU-R200)
• 1st Dead Time 0.5~180.0 sec (step: 0.1sec)
• 2nd Dead Time 1~180 sec (step: 1sec)
• 3rd Dead Time 1~180 sec (step: 1sec)
• 4th Dead Time 1~180 sec (step: 1sec)
• Reset Time 3~180 sec (step: 1sec)
• SEF 1st Dead Time 0.5~180.0 sec (step: 0.1sec)
• SEF 2nd Dead Time 1~180 sec (step: 1sec)
• SEF 3rd Dead Time 1~180 sec (step: 1sec)
• SEF 4th Dead Time 1~180 sec (step: 1sec)
• SEF Reset Time 3~180 sec (step: 1sec)
• Phase Operation Count 1~5
• Earth Operation Count 1~5
• SEF Operation Count 1~5
• Phase Fast Operation Count 0~5
• Earth Fast Operation Count 0~5
• Phase HCT Operation Count 0~5
• Earth HCT Operation Count 0~5
• Sequence Coordination 1 (on) / 0 (off)
• Single shot time 0~180 sec (step : 1sec)
Open Line (Loss of Phase) Detection• Voltage On Level 50~90% (step : 5%) of rated voltage
• Voltage Off Level 35~75% (step : 5%) of rated voltage
• Delay time 0.1~30.0 sec (step : 0.1sec)
Auto Sectionalizing (FTU-P200)
• Fault count 1~3 (step : 1)
• Reset Time 20~240 sec (step : 1sec)
Analog High/Low Alarm• Phase current• Earth current• NPS Current • Phase voltage• Power
08
P&C TECHNOLOGIES CO., LTD. 09
4 Setting Groups• Active Default Setting Group 1~4• Automatic Default Group Selection 1 (on) / 0 (off)
• Reverse power flow group 1~4
I/O • DI Debounce Time 10~500 msec (step : 5 msec)
• DO Pulse Width 10~8000 msec (step : 10 msec)
Demand Interval
• Block Interval 15/30/60 min
• Rolling Interval 1/5/15/30/60 min
FI Reset
• FI Reset Select Manual/Auto
• FI Reset Time 0~12 Hour
Close Interlock
• Live Load No/Yes
• Sync. Fail No/Yes
Waveform Trigger
• Sample Record Frequency 16/32/64/128 Samples per cycle
• Pre-1st Cycle 1~5 cycle
• Post 2nd Cycle 1~5 cycle
• Pre-2nd Trigger cycle 1~10 cycle
AC Rating
• Line Configuration Y-G/DELTA
• System Frequency 50 or 60 Hz
• Rated Voltage (L-L) 1.00~40.00 kV (step : 0.01 kV)
• Reference Voltage (L-N) 1.00~30.00 kV (step : 0.01 kV)
• Reference Phase A/B/C
• CT Ratio (1A nominal) 1~5000 (step : 1)
• CT Direction FWD/REV
• NCT Ratio (1A nominal) 1.0~5000.0 (step : 0.1)
• NCT Direction FWD/REV
• Phase Rotation A-B-C/A-C-B
System Configuration
Automatic Battery Check
• Checking Cycle 1~30 Day
• Checking Time Hour/Min
Voltage Display
• Mode L-N/L-L
Voltage Unbalance• Detection Level 0~100 % (step : 1 %)
• Detection Time 0.1~60.0 sec (step : 0.1sec)
Current Unbalance• Detection Level 0~100 % (step : 1 %)
• Detection Time 0.1~60.0 sec (step : 0.1sec)
Sag• Detection Level 0.50~0.99 pu (step : 0.01)
• Detection Time 0.5~10.0 cycle (step : 0.5cycle)
Swell• Detection Level 1.01~1.50 pu (step : 0.01)
• Detection Time 0.5~10.0 cycle (step : 0.5 cycle)
Interruption• Detection Level 0.10~0.49 pu (step : 0.01)
• Detection Time 0.5~10.0 cycle (step : 0.5cycle)
Voltage THD Alarm• Alarm Level 0.5~100.0 % (step : 0.1%)
• Detection Time 0.2~60.0 sec (step : 0.2sec)
Current THD Alarm• Alarm Level 0.5~100.0 % (step : 0.1%)
• Detection Time 0.2~60.0 sec (step : 0.2sec)
Power Quality Monitoring
Status Monitoring
Power supply status• External Power, Battery low, Battery fail, Charger Fail
10 Contacts Input configurable (signal name, interlock, invert) DC 24V, opto-isolated
Control4 Contact relay outputs
• Rated current 16A
• Mechanical Life >30x106 operations
• Operate time typical 7ms
2 Photomos Relay Outputs
• Rated current 120mA
FTU-200 series
FTU-200 series (Feeder Terminal Unit)10
Reset Annunciator
Battery Test
Switch Control
• SBO (Select before Operate - Open/Close)• Password protection• Local/Remote, Control Lock
Protection Function Blocking
• Reclosing / Protection (All) / Earth Protection (Earth & SEF)
LCD 20characters * 4 lines, LED backlight
Button MENU/UP/DOWN/ENTER, REMOTE, CONTROL LOCK, SELECT, OPEN, CLOSED, RESET, RECLOSER ENABLED, PROTECTION ENABLED, GROUND ENABLED, BATTERY TEST, LAMP TEST
LED
• Switch status Open. Closed, Gas low
• Control status Remote, Recloser Enable, Protection Enable, Ground Enable, Control Lock, Select
• Function status Live line (Source/Load), FPI A/B/C/N/SEF, UV A/B/C, Sync. Fail, Reclosing Ready/Progress/Lockout
• Comm. status Tx,Rx,RTS (SCADA Port), Ethernet Link, Active Tx, Rx (protection data)
• System status CPU Run, Error
• Power supply status Ext. Power, Batt. Low, Batt. Fail, Charger Fail
HMI
Power• A-phase, B-phase, C-phase and 3-phase• Active (kW), Reactive (kVAR), Apparent (kVA)
• Accuracy ±2%
MeasurementsCurrent
• RMS (A) & Phase Angle (Deg) a, Ib, Ic, In, I1, I2
• True RMS (A) Ia, Ib, Ic
• Accuracy ±1% or 1A (2~600A), ± 3% (600~12,000A)
• Reading Range 2~12,000A (External CT Ratio 1,000:1)
• Va-Vr Phase Angle Difference (°)
• Reading Range 0.1~40kV
• Accuracy ±1% or 0.1kV
Voltage• RMS (kV) & Phase Angle (°) Va, Vb, Vc, Vr, Vs, Vt, Vab, Vbc, Vca, Vrs, Vst, Vtr
• Sequence Component Vo, V1, V2
• True RMS (Source & Load, kV) Va, Vb, Vc, Vr, Vs, Vt
VOC (Value Of Change)
Energy• A-phase, B-phase, C-phase and 3-phase• Rollover 16-bit counter : kWh, kVARh(Import & Export)
• Accuracy ±4%
Harmonics• Ia, Ib, Ic, In and I3ph THD (%)• Source-side Va, Vb, Vc and V3ph THD (%)
• 2nd ~31st Harmonics (A, kV) Ia, Ib, Ic, In, Va, Vb, Vc
Power Factor
• A-phase, B-phase, C-phase and 3-phase• Lead / Lag display
• Accuracy ±4%
Frequency
• Measuring range 45~65 Hz
• Accuracy ±0.02 Hz
RecordingEvents
• Time tag 1ms time resolution
• I/O events (1023) / Functional events (1023) / System events (255) / Fault events (255) / PQM events (255) / Demand profile I,P,Q (1023) / Maximum demand profile I,P,Q (1023)
*Event size can be expanded due to user requirements
Counter• FTU Restart Count, Switch Trip (Open) Count• Fault Count (A / B / C / N), Total Fault Count
Fault/PQM Waveform• Up to 15 waveforms are stored.(128 samples/cycle, 20 cycles)• Data can be stored as COMTRADE file format.
General Specifications
Power Inputs• AC 127 / 220V (50 or 60 Hz)
• Step down transformer output AC 30V, 200~500VA
Power Supply Unit• Input Voltage AC 30V
• Output Voltage DC 24V
• Battery Charging Voltage 27V (Temperature Compensated)
• Over-discharge disconnection, Battery Check & Charger Circuit• CAN Interface with FTU
P&C TECHNOLOGIES CO., LTD. 11
LBS or Recloser Interface
• Basically, FTU-P200 and FTU-R200 have 2 receptacles for MS Connectors on the enclosure bottom. (3-pin cable for external AC power input & 37-pin control cable for switch interface) Control cable pins include 3 CT s analog inputs for currents, 6 PT s analog inputs for source-side (A/B/C) and load-side (R/S/T) voltages, digital inputs for status monitoring, and digital outputs for control. This original interface configuration can be customized for external CT/PT connections.
Battery (Lead Acid)• Output, Capacity DC12V * 2, 18 Ah (standard)
• Run Time over 24 hrs without AC power
• Switch Control over 100 times without AC power
• Recharging Time within 24 hrs after full discharge
• Life Guarantee 3 years
FTU Power Supply DC 24V
Test Standards• Dielectric Strength IEC 60255-5
• Impulse IEC 60255-5
• 1 MHz Burst IEC 61000-4-12 class 3
• Fast Transient IEC 61000-4-4 class 4
• Radio Frequency noise IEC 61000-4-3, 10V/m
• Vibration IEC 60255-21-1
• KSC 0220 Low Temperature Test
• KSC 0221 High Temperature Test
Dimensions• Enclosure H650 × W450 × D250 mm
• FTU H340 × W260 × D102 mm
• Modem space H300 × W75 × D200 mm
Weights• Control Box (Gross) 57 kg
• FTU (only) 4 kg
Heater (optional) Power Consumption 25W
Operating Temperature -25 ~ +70 ˚C (Ambient)
Humidity ≤95 % RH
Altitude up to 3000 m
Enclosure Material Stainless Steel, 2t (IP54)
Modem Power Supply DC 12/ 24V (Ordering option)
RS 232C Port #1
Optical isolation, ESD/Transient noise protection
Modem control supports
• DCD, RTS/CTS, DTR/DSR
Protocols
• DNP 3.0 (Level 3) or IEC60870-5-101
Baud Rate
• 1200 ~ 19200 bps
Connector Type
• DB9 Male
Connector Type
• DB9 Female
Protocols• DNP 3.0 (Level 3) or IEC60870-5-101
Baud Rate
• 1200 ~ 19200 bps
Connector Type
• DB9 Male, Pin4 is mode pin to select RS232C or RS485
Optical isolation, ESD/Transient noise protection
RS 232C/RS485 Port #2
Protocols• DNP3.0 over TCP, IEC60870-5-104
10/100 BASE-T
TCP/IP
RS232C, 115.2kBPS, MODBUS
Maintenance Port
Communication Interface
FTU-200 series
FTU-200 series (Feeder Terminal Unit)12
Outline & Dimension
Enclosure Dimensional Drawings
450
690 75
0
650
20 250
POWER RECEPTACLE
CONTROL RECEPTACLE
MODEM CABLE
VENTILATOR
120°
INTERNAL PANEL
DOOR
THERMAL INSULATION MATERIAL
PACKING
BODY
DOOR
"A" "A" SECTION "A"-"A"
50
430
90
22
Front View Side View
Bottom View
FTU-200 series
FTU-200 series (Feeder Terminal Unit)14
External Connections
JP66
5
4
3
2
1
CLOSE+ 5
6OPEN-
1BATT+CLOSE- 2
BATT- 4
3OPEN+
43
MLS
NC COM21
SWITCH
Ia
CBA
D
H
J
K
RØ SØ TØ
G
P
F
E
Ib
Ic
In
MECHANISM 37P RECEPTACLE
MO
SClose/Open Control(+24V)
DC.GND s
Handle Lock
V
X
Handle Lock_COM
Close/open_COMClose a
b
FUSE 30A
BATTERY
J4
J5
1
1
24V/26Ah
CT Protection Board
Open cM1
POWER_IN(AC230V)
A : AC1
B : AC2
BATTERY START
230V
30V
P.T(200VA)
0V
FUSE(3A)
POWER Board
POWER
DOOR S/W
1000:1CT1
CT21000:1
1000:1CT3
IN
IC
IB
IA
AC.GND
+
-
BAT."+" 3
4BAT."-"4
J43
1
2 2BATTERY
START 1
2
1
(FTU PWR)
1+24VD.GND 2
21
(MODEM PWR)
1
21
2J22 AC 30V
AC 30V1 D.GND+12V
J3
J1
D
ABC
F.GND
E
F
P
G
K
J
H
c
b
a
X
V
U
s
S
FRAME GROUND
V ICOM ++
FRAME GROUND
4
CONTROL BOX
GAS_COMGAS
PS
U
RRF.GND
(DO)
(DI)
12
43
DC.GNDCL/OP
CL/OPDC.GND 3
4
2
JP51
DI_COM
CLOSEDI_COM
OPEN
4
23
113
JP4
4 2
(F.GND)
TT
rr
VR
VS
VT
Vr
Vs
VtVoltage Calib
ration Board
Vc
Vb
Va
VcomFG
VC
VB
VA
nn
m m+24V
DC.GND
S4
S5
S6
S3
S2
S1
CØBØAØ
e
f
d d
e
f
M2Open
CloseClose/open_COM
(POWER)
TDCANTCP/IPRS232C
/485
12 : DI10
10 : COM1
2 : DO1-3 : DO2+
1 : DO1+
4 : DO2-
6 : DO4-5 : DO4+
14 : DO3-13 : DO3+
15 : PO1+16 : PO1-
1 : VA2 : VB3 : VC4 : Vabc COM5 : VR6 : VS7 : VT8 : Vrst COM
678
16 815
51110 4
612
9 3
178 2
FTU-P200
CN113
RS232C
4 : DC-3 : DC+
1 : F.G2 : F.G
4 2CN1
CN2
1 : DI2(C)2 : DI4
5 : DI94 : DI73 : DI6
9 : DI5
11 : DI8
8 : DI37 : DI1(O)6 : COM2
(STATES)
(CONTROL)
11 : DO2+12 : DO2-
10 : DO1-9 : DO1+
7 : PO2+8 : PO2- CN3
(VOLTAGE)CN4
CN5
1 : IA
6 : 3IO-5 : 3IO+
2 : IB
(CURRENT)4 : ICOM3 : IC
51211
4
CN2
61314
7
103
192
CN3
54 CN4
3
12
21
3
6
CN545
MODEMRS232 CABLE(out of supply)
(out of supply)
F.GND
(CAN)
(out of supply)MODEMRS232 CABLE(out of supply)
RS232C
FTU-R200
/485RS232C
TCP/IP CAN TD
(CAN)
SWITCH
(POWER)
U
VGAS LOW_COM V
UGAS LOW
678
16 815
51110 4
612
9 3
178 2
BATTERY CHECK BOARD
Ia
CBA
D
E
F
G
AØ BØ CØ
K
L
J
H
Ib
Ic
In
MECHANISM 37P RECEPTACLE
OPCL
PClose Control(+24V)
Open Control(+24V) R
Handle Lock W
XHandle Lock_COM
Close/open_COM
Close a
b
e
f
DC-
DC+ n
rDC/DC
FUSE 30A
BATTERY
J4
J5
1
1
CN113
24V/26Ah
CT Protection Board
Voltage Calib
ration Board
Open c
d
M1
M2
POWER_IN(AC230V)
A : AC1
B : AC2
BATTERY START
230V
30V
P.T(100VA)
0V
FUSE(3A)
POWER BOARD
POWER
DOOR S/W
Close
Close/open_COMOpen
1000:1CT_AØ
CT_BØ1000:1
1000:1CT_CØ
IN
IC
IB
IA
VA
VB
VC
VT
VS
VR
AC_GND
Va
Vb
Vc
Vt
Vs
Vr
Vcom
M.ACL OP
OP CL
+
-
4 : DC-3 : DC+
1 : F.G2 : F.G
4 2CN1
CN2(STATES)
(CONTROL)CN3
(VOLTAGE)CN4
CN5(CURRENT)
51211
4
CN2
61314
7
103
192
CN3
54 CN4
3
12
21
3
6
CN545
BAT."+" 3
4BAT."-"4
J43
1
2 2BATTERYSTART 1
2
1
(FTU PWR)
1+24VD.GND 2
2
1
(MODEM PWR)
1
21
2J22 AC 30V
AC 30V1 D.GND+12V
J3
J1
D
ABC
NF.GNDF.GND
N
H
J
L
K
G
F
E
d
c
f
e
b
a
X
W
R
P
r
n
F.GND
V I
COM ++
4
CONTROL BOX
MLS
PS
1 2
6 : COM27 : DI1(O)8 : DI3
11 : DI8
9 : DI5
3 : DI64 : DI75 : DI9
2 : DI41 : DI2(C)
1 : DO1+
10 : COM1
12 : DI10
8 : PO2-7 : PO2+
9 : DO1+10 : DO1-
12 : DO2-11 : DO2+
16 : PO1-15 : PO1+
13 : DO3+14 : DO3-
5 : DO4+6 : DO4-
4 : DO2-3 : DO2+2 : DO1-
8 : Vrst COM7 : VT6 : VS5 : VR4 : Vabc COM3 : VC2 : VB1 : VA
3 : IC4 : ICOM
2 : IB
5 : 3IO+6 : 3IO-
1 : IA
FTU-P200
FTU-R200
P&C TECHNOLOGIES CO., LTD. 15
Various types of Device for Distribution Automation
FTU-P100 / S100 / R100 Standard Controller model for Pole-mounted Load Break Switch / Sectionalizer / Automatic Circuit Recloser
FTU-GD100 Controller for Pad-mounted multi circuits LBS
FTU-RC100 Controller for Ring Main Circuit Breaker
ALTS Controller Controller for ALTS (Automatic Load Transfer Switch)
TTU (Transformer Terminal Unit) Power quality monitoring device for LV side of distribution transformer
http://www.pnctech.co.kr
Head Office & FactoryAddress : #898-43, Hogye-dong, Dongahn-gu, Anyang, Kyongki-do, 431-080, KoreaTel : +82-31-452-5791 Fax : +82-31-452-5793 R&D Center Tel : +82-31-452-5857
Seoul OfficeAddress : 5F, Kwangmyung B/D, #115-3, Bangi-dong, Songpa-gu, Seoul, 138-050 KoreaTel : +82-2-2240-8106 Fax : +82-2-2240-8188