gym.truss.1 adding steel structural … microsoft word - lc.1200-1290 tutorials.03 bldg.gym-...
TRANSCRIPT
PROF. PAUL C. KING RA
New York City College of Technology
Fall 2011
LC.1200-1290 Tutorials.03 Bldg.Gym- Prof.King V.1.0.docx
Copyright © 2011 Paul C. King
Gym.Truss.1 ADDING STEEL
Overview: Add structural c
Adjust Levels From the North Elevation
Add Columns Work from Level 1
Place steel columns
to support the long
Learning Community
New York City College of Technology ARCH_1290 & ARCH_120
Prof.King V.1.0.docx
Building
TEEL STRUCTURAL COLUMNS AND ROOF TRUSS
Add structural columns and long span roof trusses to the Gym.
rom the North Elevation make room for the height of the Long Span Truss.
Level 1 (base level) and set the Top Level to be "Bottom of Truss
lace steel columns along the exterior wall at the intersections of the grids
to support the long-span truss we will add next. Select W10x49
Learning Community
ARCH_1290 & ARCH_1200
Page 13 of 17
Building Development | Revit
ym.
Long Span Truss.
Bottom of Truss".
along the exterior wall at the intersections of the grids
W10x49 columns.
PROF. PAUL C. KING RA
New York City College of Technology
Fall 2011
LC.1200-1290 Tutorials.03 Bldg.Gym- Prof.King V.1.0.docx
Copyright © 2011 Paul C. King
Add Truss Select Structure > Truss > Load Family
Important: Snap
Attach Truss to Roof Select the Truss.
Select the roof and the truss will update to match the underside of the roof
Truss - Roof Link The top of the Truss is now associated
Learning Community
New York City College of Technology ARCH_1290 & ARCH_120
Prof.King V.1.0.docx
Building
Structure > Truss > Load Family (Structural > Trusses > Pratt Flat Truss
nap from "point" to "point" at tops of columns when placing trusses
the Truss. Modify|Structural Trusses > Attach Top/Bottom
t the roof and the truss will update to match the underside of the roof
he top of the Truss is now associated with the bottom of the roof.
Learning Community
ARCH_1290 & ARCH_1200
Page 14 of 17
Building Development | Revit
tructural > Trusses > Pratt Flat Truss)
when placing trusses
> Attach Top/Bottom
t the roof and the truss will update to match the underside of the roof
e bottom of the roof.