Features• STEVAL-BCN002V1B evaluation kit with STEVAL-BCN002V1 sensor board and

STEVAL-BCN002V1D programming board.• STEVAL-BCN002V1 sensor board:

– BlueNRG-2: Bluetooth Low Energy single-mode system-on-chip– BALF-NRG-02D3: ultra-miniature balun and harmonic filter– LSM6DSO: iNEMO 6DoF inertial module, ultra-low power and high

accuracy– LIS2MDL: magnetic sensor, digital output, 50 gauss magnetic field dynamic

range, ultra-low power, high performance, 3-axis magnetometer– VL53L1X: long range Time-of-Flight sensor based on ST FlightSense

technology– MP34DT05TR-A: MEMS audio sensor omnidirectional digital microphone,

64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP– LPS22HH: ultra-compact piezo-resistive absolute pressure sensor,

260-1260 hPa, digital output barometer, full-mold dust resistant, holed LGApackage (HLGA)

– HTS221: capacitive digital sensor for relative humidity and temperature– CR2032 battery powered (not included)

• STEVAL-BCN002V1D programming board:– program and debug firmware running on sensor board– supply power to the sensor board

• ST BLE Sensor app available on Android (Google Play) and iOS (iTunes)• Target Applications:

– Internet of Things, Smart Building, Home and City– Tracking System, Supply Chain/ Cold-Chain Management– Smart Agriculture (soil control, animal activity tracking, etc.)

DescriptionThe STEVAL-BCN002V1B Bluetooth LE enabled sensor node development kitfeatures the STEVAL-BCN002V1 multi-sensor board based on BlueNRG-2 SoCBluetooth Low Energy application processor. This sensor board has accelerometer,gyroscope, magnetometer, pressure, humidity, Time-of-Flight and microphonesensors, and is powered by a common CR2032 coin battery.

The sensor board communicates with a Bluetooth LE enabled smartphone runningthe ST BLE Sensor app, available on Google Play and iTunes stores.

The STEVAL-BCN002V1D adapter board is used to program and debug the sensorboard. The adapter board is powered via USB.

Product summary

Bluetooth LE enabledsensor nodedevelopment kit

STEVAL-BCN002V1B

Sensor board withBluetooth LE SoC anda range of sensors

STEVAL-BCN002V1

Adapter andprogramming board

STEVAL-BCN002V1D

BLE sensor applicationfor Android and iOS ST BLE Sensor

BlueTile – Bluetooth LE enabled sensor node development kit

STEVAL-BCN002V1B

Data brief

DB3697 - Rev 6 - March 2019For further information contact your local STMicroelectronics sales office.

www.st.com

1 Component layout

Figure 1. STEVAL-BCN002V1 sensor node front and rear components1a. BlueNRG-2 Bluetooth 5.0 network and application processor 1b. BALF-NRG-02D3 integrated balun and matching network2a. LPS22HH ambient pressure sensor 2b. LSM6DSO smart accelerometer and gyroscope 2c. LIS2MDL magnetometer 2d.VL53L1X proximity by time-of-flight 2e. HTS221 relative humidity and temperature 2f. MP34DT05-A top-port digital microphone3a. User button 3b. RGB LED4a. I2C SCL 4b. I2C SDA 4c. GND 4d. ADC 4e. TEST 4f. VDD 4g. GND 4h. RFTEST5a. II-network (not mounted) 5b. SMD antenna6a. Inductor to enable lowest power BLE active mode 6b. 32kHz crystal to enable lowest power BLE sleep mode7a. Battery holder 7b. CR2032 battery (not included)8. 10-pin connectorFCC ID: S9NSTEBCN2V1 IC ID: 8976C-STEBCN2V1

1a2a

4a

5a

6a

2b

2c2d

2e

2f

3a3b

4b4c

4d4e

4f

4g4h

1b

5b

6b

7a

7b

8

RESETNUART RX

UART TXSWD CLK

SWD IO

IO IO IO IO

GNDBOOTGND GND VDD

1

210

STEVAL-BCN002V1BComponent layout

DB3697 - Rev 6 page 2/17

Figure 2. STEVAL-BCN002V1D host board for programming and debuggingTop side components:1. ST-LINK V3 debugger2. 20 pin JTAG/SWD for ext. ST-LINK V2Bottom side components:1. VCOM for STM32L1512. 5 pin JTAG/SWD for Nucleo ST-LINK

2

21

1

STEVAL-BCN002V1D

NUCLEO ST-LINK

STEVAL-BCN002V1BComponent layout

DB3697 - Rev 6 page 3/17

2 Schematic diagrams

STEVAL-BCN002V1BSchematic diagrams

DB3697 - Rev 6 page 4/17

2.1 STEVAL-BCN002V1 sensor board schematics

Figure 3. STEVAL-BCN002V1 schematic (1 of 3)

SWDIOSWDCLK

GND

GND

GND

INT_

3XIN

T_C

OM

UAR

T_R

X

100n

GND

100k

VDD

25R

ESET

N

26SM

PSFI

LT1

27SM

PSFI

LT2

28VD

D1V

2

29D

IO13

DIO

1230

TEST

3132D

IO11

1 DIO102 DIO93 DIO84 DIO75 DIO66 VBAT37 DIO58 DIO4

VDD

L3

C7

GNDXT

AL

GND

GND

1µ

GND

EXPEXP

RX_PB1

RX_NB2 ANT A1

GND A2

U2

3.9n

VDD

C20

U1G1

2n

R1L2

C2

FT1

FT2M

T

C4

9D

IO3

DIO

210

DIO

111

DIO

012 13

ANAT

EST0

/DIO

1414

ANAT

EST1

ADC

115

ADC

216

C12

VDD

MLG

0603

P9N

1H

GR

M03

32C

1H7R

0CA0

1

100n

BALF-NRG-02D3

Balun

Bluetooth low-energy chip

Chip Antenna

BLUENRG-2

GND

C23

I2C_CLKI2C_SDA

10µH

100n

GN

D

7 pF

n.m

.

9.1

nH

22p

C24

GND

100k

n.m.

0

n.m.

GND

17FXTAL1

18FXTAL0VBAT2 19RF1 20RF0 21

22SXTAL1

23SXTAL0

24VBAT1

10n

GND

15p

GND

ANT016008LCS2442MA1

U5

XTAL32

VDD

GN

D

VDD

150n

GN

D

100n

NX2012SA-32.768K-STD-MUB-1

GND

GND

C6

L1

C28

CX2

016D

B320

00D

0FLJ

CC

BOO

T

PDM

_DAT

APD

M_C

LK

L_B

L_G

L_R

TEST

1

L6

C27

R7

C13

C17

ADC

NR

STUART_TXBOOT

GND GND GND

GND

C5

C1

100p

1µ

C21 22

p

C9

1µ

15p

C18

1µ

DB

3697 - Rev 6

page 5/17

STEVAL-B

CN

002V1BSchem

atic diagrams

Figure 4. STEVAL-BCN002V1 schematic (2 of 3)

100n

VL53L1CBV0FY

BLM15GG471SN1D

L4

VDD

GND

LSM6DSO

1

SCL

P2

VDD

P1

I2C_SDA

INT_COM

INT_3X

BOOT

V+V+

PDM_CLK

U10

P6

VDD

VDD

V+V+

P3CS DRDY

GN

D

GN

D

GN

DG

ND

GN

D

GN

D

C30

C11

C10

C16

µ

GND

GNDGND

GND

GND

GND

GND

VDDVDD

GND

VDD

VDD

VDD

10p

V+

VDD

P_1 AVDDVCSELP_2 AVSSVCSELGNDP_3

GND2P_4

XSHUTP_5

GND3P_6 GPIO1 P_7DNC P_8SDA P_9SCL P_10AVDD P_11GND4 P_12

100n

µ

CLK

4.7

V+

I2C_CLK

VDD

I2C

_CLK

VDD

Digital Microphone

Magnetometer

Accelerometer / Gyroscope

Pressure

Humidity / Temperature

Proximity

GND

LPS22HH

Decoupling / Filtering

GND

I2C_CLK

U6C19

VDD

I2C

_CLK

PDM_DATA

VDD

220n

I2C_SDA

HTS221

100n

GND

I2C

_SD

A

I2C

_SD

A

VDD

VDD

I2C_CLK

LIS2MDL

SDO

P5

B3

DOUT B4

GNDG1*4

LR B2VDDB1

CS

P12

SCL

P13

SDA

P14

U7

U9

P7INT/DRDY

SCLP1

CSP3

SDAP4 C1 P5

P1 VDD_IOSCLP2 CS P6

P7INT/DRDY

GN

DP5

SDA

P4

VDD P8INT2 P9OCS P10NC P11

GN

DP6

*2

GND

VDD

IOP5

GN

D1

P6

GN

D2

P7VD

D

GND

100n

GND

VDD

P9

VDD

_IO

P10

GND

100n

MP34DT05-A

GN

D1

P8

GN

D2

P9

VDD

P10

RES

P3

SDA

P4

VDD

U8

C29

C3

C15

VDD

VDD

C14

SDOP1

SDXP2

SCXP3

INT1P4

U21

I2C

_SD

A

VDDVDD

VDD

GND

DB

3697 - Rev 6

page 6/17

STEVAL-B

CN

002V1BSchem

atic diagrams

Figure 5. STEVAL-BCN002V1 schematic (3 of 3)

Test points

P1 P1P2 P2P3 P3P4 P4P5 P5P6 P6P7 P7P8 P8P9 P9P10 P10

U4

SP+2

R3

ADC

C8

VDD

+P+1P- -

SWDIO

SWDCLK

NRST

TEST1

L_G

L_B

UAR

T_R

XI2C_SDA

P1P1

P2P2

P3P3

P4P4

onnectorebug cdARM10

RGB LEDPull-ups

CR2032 3 V battery

Push uttonb SML-

LX04

04SI

UPG

USB

GND

GND

GND

GND

VDD

VDD

R4

R5

R2

T1S+

R8

GN

DSD

ACLK

R9

SW1

UART_RX

UART_TXBOOT

B3U

-300

0P(M

)

VDD

GN

D

10k

10k

VDD

VDD

52575 135

VDD

I2C

_SD

A

L_R

FTS-105-01-F-D

100p

GND

I2C_CLK

100

VDD I2

C_C

LK

GND

BAT-HLD-001

CN1

DB

3697 - Rev 6

page 7/17

STEVAL-B

CN

002V1BSchem

atic diagrams

2.2 STEVAL-BCN002V1D programming board schematics

Figure 6. STEVAL-BCN002V1D schematic (1 of 3)

Voltage Regulator

USB ESD Protection

Micro USB Connector

STM32L1 VCOM Interface

Crystal and Bypass capacitors

STM32L151CBT6

USBLC6-2P6

10u

18p 18p

7A-8.000MAAJ-T

GND GND

100n

GND

100n

GND

100n

GND

100n

GND

100n

GND

100n1u 100n

GNDGND GND GND

1u

GND

LD39015M33R

GND

47k

100n

GNDBA

T54C

0

0VDDA9

VDD_124

VDD_236

VDD_348

VLCD1

BOOT044

PA0-WKUP110

PA111

PA212

PA313

PA414

PA515

PA616

PA717

PA829

PA930

PH0-OSC_IN5

PA1031

PA1132

PA1233

PA1334

PC14-OSC32_IN3

PA1437

PA1538

VSS_123

VSS_235

VSS_347

VSSA8

PB0 18

PB1 19

PB2 20

PB3 39

PB4 40

PB5 41

PB6 42

PB7 43

PB8 45

PB9 46

PB10 21

PB11 22

PB12 25

PB13 26

PB14 27

PB15 28

NRST 7

PH1-OSC_OUT 6

P-C13_RTC_AF1-WKUP2 2

PC15-OSC32_OUT 4

U1

GND2

I/O1 6I/O1.1

I/O2 4I/O2.3

VBUS 5

U2

C1

C2 C3

X1

C4 C5 C6 C7 C8

C9C10 C11

C12IN1 OUT 5

EN3 GND 2

U3

R3

C13

D1

R15

R16P11

P22

P33

P44

P55

G1

M1

G2

M2

G3

S1G

4S2

G5

S3G

6S4

USB

GND

GNDGNDGNDGND

GNDGND

GN

D

GNDGND

BOOT

RESETN

VDD_MCU

VDD_MCUVDD_MCUVDD_MCUVDD_MCU

VDD

_MC

U

VDD

_MC

U

VDD

_MC

U

VDD

_MC

U

VDD

_MC

U

VDD_MCU

VDD_MCU

VDD

_MC

U

JTMS

JTCK

JTDO

JTDI

USBDM

USBDM

USBDP

USBDP

VUSB

VUSB

VUSB

VUSB

DM

DM

DPDP

OSC_OUT

OSC

_OU

TOSC_IN

OSC

_IN

NRST_MCU

NR

ST_M

CU

5V_V3

UART_RX_STM32UART_TX_STM32

Mic

ro U

SB

DB

3697 - Rev 6

page 8/17

STEVAL-B

CN

002V1BSchem

atic diagrams

Figure 7. STEVAL-BCN002V1D schematic (2 of 3)

STM32L1 Debug Connector

BlueTile Debug Connector

JTAG Debug Connector

Nucleo STLink SWD Connector

Reset Button

Anchor Connector

Anchor Connectors

Nucleo STLink UART connector

Pogo pin

GNDGND

1296-T10 1296-T10

1296-T10 1296-T10

GND

NPTC041KFXC-RC

GND

0921-1-15-20-75-14-11-0

0015912200

n.p.

n.p.

NPP

C02

1KFX

C-R

C

NPP

C02

1KFX

C-R

C

NPP

C02

1KFX

C-R

C

NPP

C02

1KFX

C-R

CB3

U-3

000P

(M)

X2-1 X2-2X2-3 X2-4X2-5 X2-6X2-7 X2-8X2-9 X2-10

X4-1 X4-2X4-3 X4-4X4-5 X4-6X4-7 X4-8X4-9 X4-10

P1P1

P2P2

P3P3

P4P4

U4

P1P1U5

JTAG

P1P3P5

P2P4P6

P7P9

P8P10

P11P13P15

P12P14P16

P17P19

P18P20

R6

R8

CN7P1CN7P2CN7P3CN7P4CN7P5

CN

1P1 P2

CN

11P1 P2

CN

6P1 P2

CN

3P1 P2

SW1 GND

GND

GNDGNDGNDGNDGNDGNDGND

GNDGNDGNDGND

GNDGND

GND

GND

BOOTRESETN

RES

ETN

RESETNRESETN

VDD_MCU JTMSJTCKJTDOJTDI

VDD VDD

VDD

VDDSWDIO

SWDIO

SWDIO

SWDCLK

SWDCLK

SWDCLK

UART_TX

UAR

T_TX

UART_RX

UAR

T_R

X

DB

3697 - Rev 6

page 9/17

STEVAL-B

CN

002V1BSchem

atic diagrams

Figure 8. STEVAL-BCN002V1D schematic (3 of 3)

Default configuration allow user to:

1) If PLUGGED on a NUCLEO STLink:- Hardware modification: populate R6 and R8 with 0 ohm- Programming: using Nucleo STLink mini USB- Virtual COM: using Nucleo STLink mini USB; both SW3 and SW2 must be in (P1-P2) position

2) If using an EXTERNAL JTAG debugger:- Programming: using JTAG connector on top- Virtual COM: using micro USB connector on the bottom; both SW3 and SW2 must be in (P2-P3) position

3) If using the INTEGRATED USB to UART interface:- Programming: using micro USB connector on the bottom and only using BlueNRG-1 Flasher Utility- Virtual COM: using micro USB connector on the bottom; both SW3 and SW2 must be in (P2-P3) position

4) If using the INTEGRATED ST-LINK/V3:- Hardware modification: populate R4 and R14 with 0 ohm- Programming: using ST-LINK/V3 SWD- Virtual COM: using ST-LINK/V3 micro USB; both SW3 and SW2 must be in (P1-P2) position

ST-LINK/V3

0

10k

NPP

C02

1KFX

C-R

C

n.p.

n.p.

n.p.

n.p.

n.p.

B_UART_RXP1

B_UART_CTSP2

B_UART_RTSP3

T_JTMSP4

GND_DETECTP5

T_JTDOP6

B_SPI_CLKP7

GND_1P8

B_CAN_RXP9

B_CAN_TXP10

B_UART_TXP11

T_VCP_TXP12

T_JTCKP13

B_SPI_NSSP14

T_VCP_RXP15

B_I2C_SCLP16

T_SW_DIR P32

T_NRST P31

T_VCC P30

GND_5 P29

T_JTDI P28

GND_4 P27

GND_3 P26

B_SPI_MOSI P25

GND_2 P24

B_SPI_MISO P23

5V_POWER_SUPPLY P22

B_GPIO3 P21

B_GPIO2 P20

B_GPIO1 P19

B_GPIO0 P18

B_I2C_SDA P17

ST1

R2

R9

CN

5P1 P2

R1

R10

R13

R14

R4

P1P1

P2P2

P3P3

SW2

P1P1

P2P2

P3P3

SW3

GND

GNDGND

GNDGND

GND

GND

BOOT

BOOT

RESETN

VDD_MCUVDD

VDD

VDD

SWDIO

SWDCLK

UART_TX

UART_RX5V_V3 UART_RX_STM32

UART_RX_V3

UART_RX_V3

UART_TX_STM32

UART_TX_V3

UART_TX_V3

DB

3697 - Rev 6

page 10/17

STEVAL-B

CN

002V1BSchem

atic diagrams

3 How to set up the STEVAL-BCN002V1D board

Use the configurations below to set up the STEVAL-BCN002V1D board according to your requirements.

If plugged on a NUCLEO ST-LINK board:Step 1. Place 0 Ω resistors (short) on R6 and R8.Step 2. For programming: load the firmware via the NUCLEO ST-LINK mini USB connector.Step 3. For virtual COM: use the NUCLEO ST-LINK mini USB connector.

SW3 and SW2 can be in any position.If using an external JTAG debugger:

Step 4. For programming: use the JTAG connector on the top side of the STEVAL-BCN002V1D board.Step 5. For virtual COM: use the micro USB connector on the bottom side of the STEVAL-BCN002V1D board.

SW3 and SW2 can be in any position.If using the integrated USB to UART interface:

Step 6. For programming: use the micro USB connector on the bottom and use the BlueNRG-1 Flasher Utilityonly.

Step 7. For virtual COM: use the micro USB connector on the bottom side of the STEVAL-BCN002V1D board.Both SW3 and SW2 must be in (P2-P3) position.

If using the integrated ST-LINK/V3:Step 8. Place 0 Ω resistors (short) on R4 and R14.Step 9. For programming: use the ST-LINK/V3 SWD.Step 10. For virtual COM: use the ST-LINK/V3 micro USB.

Both SW3 and SW2 must be in (P1-P2) position.

STEVAL-BCN002V1BHow to set up the STEVAL-BCN002V1D board

DB3697 - Rev 6 page 11/17

4 Certification

4.1 Regulatory compliance

Table 1. RF certification summary

Certification ID Comment

FCC S9NSTEBCN2V1 (PENDING) On-board SMD antenna

IC 8976C-STEBCN2V1 (PENDING) On-board SMD antenna

ETSI 0051-RED-0010 REV.0 (PENDING) On-board SMD antenna

4.2 FCC and ICThe STEVAL-BCN002V1B kit has been tested and complies with the FCC part 15 and IC RSS-210 regulations.These limits are designed to provide reasonable protection against harmful interference in approved installations.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:1. The device must not cause harmful interference.2. The device must accept any interference received, including interference that may cause undesired

operation.Modifications or changes to this equipment not expressly approved by the party responsible for compliance mayrender void the user's authority to operate this equipment.

4.3 CESTEVAL-BCN002V1B kit complies with the following European EMI/EMC and safety directives and standards:• EN 300 328 V 2.1.1 (2016-11) (a)• ETSI EN 301 489-17 V3.1.1 (2017-02) (b)• ETSI EN 301 489-1 V2.1.1 (2017-02) (c)• EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 (d)• EN 62479:2010

The module has the CE marking:

Figure 9. CE marking

The module has obtained the RED certificate: No. 0051-RED-0010 REV. 0The certified module production firmware release is: 1.XFor additional information please refer to:STMicroelectronics Via C. Olivetti, 2 Agrate Brianza 20864 (ITALY)

STEVAL-BCN002V1B

DB3697 - Rev 6 page 12/17

Revision history

Table 2. Document revision history

Date Version Changes

06-Aug-2018 1 Initial release.

07-Aug-2018 2 Minor text changes.

18-Oct-2018 3 Updated Section 2 Schematic diagrams.

13-Nov-2018 4Updated cover page image.

Updated Figure 1 and Figure 2.

06-Feb-2019 5Updated title.

Added references to STBLESensor app.

04-Mar-2019 6Minor text edits

Added Section 2.2 STEVAL-BCN002V1D programming board schematics

STEVAL-BCN002V1B

DB3697 - Rev 6 page 13/17

Contents

1 Component layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

2 Schematic diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

2.1 STEVAL-BCN002V1 sensor board schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.2 STEVAL-BCN002V1D programming board schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3 How to set up the STEVAL-BCN002V1D board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

4 Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

4.1 Regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4.2 FCC and IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4.3 CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

STEVAL-BCN002V1BContents

DB3697 - Rev 6 page 14/17

List of figuresFigure 1. STEVAL-BCN002V1 sensor node front and rear components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Figure 2. STEVAL-BCN002V1D host board for programming and debugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Figure 3. STEVAL-BCN002V1 schematic (1 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Figure 4. STEVAL-BCN002V1 schematic (2 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Figure 5. STEVAL-BCN002V1 schematic (3 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Figure 6. STEVAL-BCN002V1D schematic (1 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Figure 7. STEVAL-BCN002V1D schematic (2 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Figure 8. STEVAL-BCN002V1D schematic (3 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Figure 9. CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

STEVAL-BCN002V1BList of figures

DB3697 - Rev 6 page 15/17

List of tablesTable 1. RF certification summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Table 2. Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

STEVAL-BCN002V1BList of tables

DB3697 - Rev 6 page 16/17

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to STproducts and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. STproducts are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design ofPurchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

© 2019 STMicroelectronics – All rights reserved

STEVAL-BCN002V1B

DB3697 - Rev 6 page 17/17