training booklet 2013.pdf

Upload: oyahgrbjijgv-bn

Post on 04-Jun-2018

249 views

Category:

Documents


3 download

TRANSCRIPT

  • 8/14/2019 Training Booklet 2013.pdf

    1/24

  • 8/14/2019 Training Booklet 2013.pdf

    2/24

    Page 2

    Embedded Control Systems (Microprocessor / Microcontroller) for Industry Process

    Control and AutomationMechatronics Course [ECSC]

    Course Code : 2013/COM/ECSC/01

    2013/COM/ECSC/02

    Commencement : March, 2013 / September, 2013

    The course will be held two times during the year.Objective : To give the participant a knowledge of how Microprocessors / Microcontrollers

    act in process controls in the industry. A practical experience with the related

    components to design their own hardware for simple controlling or monitoring

    systems will be given.

    Target Group : Industry Engineers / Technicians working in production using

    Modern Controllers & Lecturers of Technical Institutes.

    Course Contents :

    Introduction to Microprocessors / Microcontrollers used inIndustry.

    Microcontroller related components Details of microcontroller related peripherals Basic microcontroller applications using Microchip PIC Microcontrollers Industry applications using Microchip PIC microcontrollers

    Medium : Sinhala/English

    Duration : (I) 100 Hours.

    (ii) 14 days (07 Saturdays & 07 Sundays)

    (8.30 a.m. -5.00 p.m.)

    Course Fee : Rs. 25,000/= inclusive of Lunch & Tea, Printed Course Material, CD

    and a PIC microcontroller Programmer / Demonstration board.

    Application form : See Annex - I

    Course Coordinator : Mr. Kavindra Jayawardena

    Tel. : 011-2651880, 011-2650838

    Fax : 011-2650462

    E-mail : [email protected]

    Applications to be : Kavindra Jayawardena, Course Coordinator- ECSC , Communication Division,

    sent to Arthur C. Clarke Institute for Modern Technologies, Katubedda,

    Moratuwa.

    mailto:[email protected]:[email protected]
  • 8/14/2019 Training Booklet 2013.pdf

    3/24

    Page 3

    Programmable Logic Controller Course [PLCC]

    Course Code : 2013/ISD/PLCC/01 (Weekend)

    2013/ISD/PLCC/02 (Week days)

    Commencement : February, 2013 / May, 2013

    Objective : Train Industrialists & the Youth to work in an automation

    environment, using the Programmable Logic Controllers.

    Target Group : Electronic, Electrical, , Mechanical & Industrial Engineers,

    Technicians and electronic enthusiasts interested in PLC

    Technology

    Course Content :

    Introduction to Programmable Logic Controller Advantages and limitations of PLC Industry environment & some important features of PLC Input and Output Devices Standard Instruction set of Siemens S7-200 PLC Ladder Programming for SIMATIC S7200 PLC Familiarization of HMI Unit

    (8.30 a.m to 16.30 p.m)

    Medium : Sinhala/English

    Course Fee : Rs. 13,000/= (inclusive of Lunch ,Tea & Printed Course Material)

    Application form : See Annex - I

    Course Coordinator : Mrs. Champika Janashanthi

    Tel. : 011-2650678, 011- 2650838

    Fax : 011-2650462

    E-mail : [email protected]

    Applications to be : C. Janashanthi, Course Coordinato - PLC , Industrial Services Division,

    sent to Arthur C Clarke Institute for Modern Technologies, Katubedda,

    Moratuwa.

    Duration : PLCC/01 - 05 Saturdays/ 05 SundaysPLCC/02- 05 Week days

    mailto:[email protected]:[email protected]
  • 8/14/2019 Training Booklet 2013.pdf

    4/24

    Page 4

    Modern Electronic Test & Measuring Instruments with Digital Emphasis (METMIDE)

    Course Code : 2013/ED/METMIDE/01

    Commencement : 06th

    10th

    May, 2013 ( Tentative )

    Objective : The course aims at discussing the design, usage, applications,

    advantages and limitations of modern electronic test and measuring

    instruments such as oscilloscopes, signal sources, spectrum analysers,logic analysers, instrument calibration, trouble shooting and

    maintenance. 45% of time is dedicated to hands-on sessions.

    Target Group : Electronic, Telecom, Computer Hardware Professionals, Process

    Industry Engineers, Scientists, Technicians and specially beneficial

    for teaching staff in Universities & Technical Schools in relevant

    subjects.

    Course Contents : Introduction Fundamental of oscilloscope Recent developments of DSO techniques Conventional signal sources and arbitrary waveform generators Spectrum analyser Logic analyzer Network analyser Transmission measurements Calibration of instruments Trouble shooting and maintenance of test & measuring

    instruments

    Medium : English/Sinhala

    Duration : 05 days (9.00 a.m.4.00 p.m.)

    Course Fee : Rs. 15,000/= (inclusive of Lunch & Tea, Printed Course Material)

    Application form : See Annex - I

    Course Coordinator : Ms. Janaki Athuraliya

    Tel. : 011-2651568,2650838

    Fax : 011-2650462

    E-mail : [email protected]

    Applications to be : Janaki Athuraliya, Course CoordinatorMETMIDE,

    sent to Electronics & Microelectronics Division, Arthur C Clarke Institute for

    Modern Technologies, Katubedda, Moratuwa.

    mailto:[email protected]:[email protected]
  • 8/14/2019 Training Booklet 2013.pdf

    5/24

    Page 5

    Modern Electronic Components (MEC)

    Course Code : 2013/ED/MEC/01

    Commencement : 26th

    30th

    August, 2013

    Objective : In the half century, following the invention of the transistor,

    unprecedented developments related to solid state components have

    helped generating a massive market for electronics and information

    technologies. In this fast changing field, the professionals involved with

    industrial systems come across many modern component families. The

    course is designed as an introduction to these new component families,

    both analogue and digital, together with data conversion (analogue to

    digital and digital to analogue conversion) components. 45% of time is

    dedicated to hands-on sessions.

    Target Group : Electronic, telecom, computer hardware professionals, process industry

    engineers and technicians. In addition, the course can be beneficial forscientists and academics who are working with modern semiconductor

    components.

    Course Contents :

    Introduction to semiconductor technologies Voltage references, voltage regulators and SMPS controllers Operational amplifiers- A modern view point Data converters (Analogue to Digital / Digital to Analogue) Microprocessors and micro controllers Digital signal processors Programmable logic devices and field programmable gate arrays Memory devices Optoisolators Sensors Nonlinear devices Rechargeable batteries and their management Surge protective devices

    Medium : English/Sinhala

    Duration : 05 days (9.00 a.m.4.00 p.m.)

    Course Fee : Rs. 15,000/= (inclusive of Lunch & Tea, Printed Course Material)

    Application form : See Annex - I

    Course Coordinator : Ms. Janaki Athuraliya

    Tel. : 011-2651568,2650838 Fax : 011-2650462

    E-mail : [email protected]

    Applications to be : Janaki Athuraliya, Course CoordinatorMEC,sent to Electronics & Microelectronics Division, Arthur C Clarke Institute for

    Modern Technologies, Katubedda, Moratuwa.

    mailto:[email protected]:[email protected]
  • 8/14/2019 Training Booklet 2013.pdf

    6/24

    Page 6

    Modern Power Electronics (MPE)

    Course Code : 2013/ED/MPE/01

    Commencement : 21st

    23rd

    January, 2013 ( Tentative )

    Objective : Power electronic converters can be found wherever there is a need to

    modify a form of electrical energy. Unprecedented developments haveoccurred in modern systems based on monolithic VLSI components

    with multimillion transistors of submicron dimensions. These two

    reasons have affected the power electronic interface of products and

    systems where power quality electronic play a key role in control,

    protection supervision and motor drives etc.

    The course is aimed at discussing subjects such as modern power

    semiconductors; switch mode power supplies; UPS; power conditioning

    and protection; energy saving lamps and electronic ballasts; modern

    batteries and management techniques ; power factor correction and

    harmonic control etc.

    Target Group : Electronic, telecom, computer hardware professionals and process

    industry engineers, electrical engineers and technicians working

    with power electronic subsystems.

    Course Contents :

    Power electronic industry & Power semiconductors Switch mode power supplies Rechargeable batteries and their management Protection systems for low voltage, low power systems Uninterruptible power supplies Energy saving lamps and electronic control Power factor correction and harmonic control Grounding and earthing

    Medium : English/Sinhala

    Duration : 03 days (9.00 a.m.4.00 p.m.)

    Course Fee : Rs. 10,000/= (inclusive of Lunch & Tea, Printed Course Material)

    Application form : See Annex - I

    Course Coordinator : Ms. Janaki Athuraliya

    Tel. : 011-2651568,2650838

    Fax : 011-2650462

    E-mail : [email protected]

    Applications to be : Janaki Athuraliya, Course CoordinatorMEC,sent to Electronics & Microelectronics Division, Arthur C Clarke Institute for

    Modern Technologies, Katubedda, Moratuwa.

    mailto:[email protected]:[email protected]
  • 8/14/2019 Training Booklet 2013.pdf

    7/24

    Page 7

    Computer Networking & Linux server Administration (CNLA)

    Course Code

    Commencement :

    : 2013/IT/CNLA/01

    16th

    March , 2013

    05th

    October, 2013

    Objective : To give the participants a thorough knowledge on computer networking and

    Free and Open-Source ( FOSS ) server based solutions starting from the basics

    and reaching its peak to design a complete network which can compete with

    various industrial applications using the most efficient and correct theoretical

    scenarios accompanied with hands on lab sessions.( This covers all the areas

    relevant to reputed Network Associate Courses )

    Target Group : Employees who are interested in Linux and Networking

    Course Contents : Networking Fundamentals The OSI and TCP/IP Models IP Addressing Inter-networking Operating System (IOS) IP Routing & Routing Protocols I Routing Protocols II / Switching and VLANs Network Security Wide Area Networks (WAN) and Virtual Private Networks (VPN) Introduction to Free and Open Source Software (FOSS) and Linux Introduction and Configuration of DHCP

    Apache Web server Setting up Mail Server Squid-cache Server Installation and Configuration LAMP Technology / Introduction to MySQL /Basics of PHP Linux Security Configure tools and utilities to minimize exposure and detect intrusions

    Medium : Sinhala/ English

    Duration : Saturday (9.00 am to 5.00 pm)Total 120 hours ( 16 days ) course

    Course Fee : Rs. 24,000 /= inclusive of Refreshments and Course Materials

    Application Form : See Annex IV ( Maximum 20 number of Participants )

    Course Coordinator : Mr. Rohana Dasanayake

    Tel : 011-2651567, 011-2650838 Fax : 011-2650462

    E-mail : [email protected]

    Applications to be

    sent to

    : Mr. Rohana Dasanayake ,Course Coordinator- CNLA,

    IT Division, Arthur C. Clarke Institute for Modern Technologies,

    Katubedda, Moratuwa

  • 8/14/2019 Training Booklet 2013.pdf

    8/24

    Page 8

    Introduction to Remote Sensing and GIS (IRSGIS)

    Course Code : 2013/SAD/IRSGIS/01

    Scheduled : Commencement will be announced

    Applications before : 3 weeks before commencement

    Duration : 4 days

    Workshop hours : 09.00 a.m.4.15 p.m.

    Objective : Introducing and promoting Remote Sensing and GIS technology as a

    multidisciplinary tool which can be applied effectively in various subject

    areas.

    Target Group : Professionals, academics & technical staff

    Workshop Fee : Rs. 12, 000/= (Including tea/refreshments, meals, printed course

    material and lab usage)

    Medium : English

    Course Content : Lectures on

    Introduction to the course Map projections Introduction to aerial photography Visual Interpretation (Aerial Photographs) Stereoscopy Introduction to Remote Sensing Visual Interpretation (Satellite Imagery) Digital Interpretation (Satellite Imagery) Introduction to GIS Introduction to GPS and navigation systems Applications of GISCourse Practicals

    Map interpretation, stereoscopic vision, aerial photographicinterpretation

    Satellite Image Interpretation and enhancement Working with Digital data Preparation of digital data

    Application form : See Annexure - I

    Course Coordinator : Mr. I.P. Senanayake

    Tel. : 011-2651566, 011-2650838 Fax : 011-2650462

    E-mail : [email protected]

    Applications to be : Mr. I.P. Senanayake,

    sent to Course Coordinator - IRSGIS,

    Space Applications Division, Arthur C Clarke Institute for Modern

    Technologies, Katubedda, Moratuwa.

    mailto:[email protected]:[email protected]
  • 8/14/2019 Training Booklet 2013.pdf

    9/24

    Page 9

    Workshop on Introduction to Astronomy (WIA)

    Course Code : 2013/SAD/WIA/01

    Scheduled : December, 2013

    Applications before : 30th

    November, 2013

    Duration : 3 days (including one day & all night)

    Workshop hours : 09.30 a.m.10.00 p.m.

    Objective : The objective of this workshop is to promote and popularize Astronomy

    among school children. This Program covers both theoretical and

    observational aspects of basic astronomy. Night sky observations through the

    GOTO 45cm telescope, the largest optical telescope, in Sri Lanka and usage of

    modern astronomical instruments such as CCD cameras, spectrograph,

    photometer etc will be part of the program.

    Target Group : The workshop is tailored for school children, who have a keen interest in

    Astronomy. Desired age group is between 14- 20 years.

    (Due to limited space available, selections will be made on first come firstserve basis.)

    Workshop Fee : Rs.7,000/= (Includes Lunch, Dinner & Tea, printed course material, use of

    telescopes, computers and other astronomical instruments.)

    Medium : Sinhala/English

    Course Content : Lectures on

    The development of astronomy, constellations & star charts The solar system & the universe Moon, eclipses asteroids & comets Sun as a star The birth and death of stars, synthesis of elements Telescopes and modern astronomical instruments Variable stars Introduction to astronomy softwareWorkshop Practicals

    Observing celestial objects through the Sri Lankan largest telescope andother modern telescopes

    Making simple refractor telescopes & sextant Using star-charts Almanacs, Planisphere Solar observations using Hydrogen Alpha and other solar filters Familiarizing the use of spectrograph, photometer & CCD cameras Obtain Solar spectra through spectrograph & identifying elements Obtain spectra of bright stars and nebulae

    Application form : See Annexure - III

    Course Coordinator : Mr. Indika Medagangoda

    Tel.: 011-2651566, 011-2650838 Fax: 011-2650462

    E-mail: [email protected]

    Applications to be : Indika Medagangoda, Course CoordinatorWIA, Space Applications Division,

    sent to Arthur C Clarke Institute for Modern Technologies, Katubedda, Moratuwa.

    mailto:[email protected]:[email protected]
  • 8/14/2019 Training Booklet 2013.pdf

    10/24

    Page 10

    W

    Workshop On Robotics (WR)

    Course Code : 2013/COM/WR/01

    Commencement : May, 2013

    Objective : To give good understanding of simple robot designing, programming

    and components used in robot development.

    Target Group : University students, Engineers, Technicians working in production

    using modern controllers and Lecturers of Technical Institutes.

    Course Contents :

    Microcontrollers based robot programming, Using mechatronic components like pneumatics, motors,

    solenoids, relays etc.

    Programming Mobile robots and related peripherals. Using advanced sensors for robot navigation

    Medium : Sinhala / English

    Duration : I. 50 Hours.II. 03 Saturdays & 03 Sundays (9.30 a.m.6.00 p.m.)

    Course Fee : Rs. 18,000/= inclusive of lunch & Tea, Printed Course Material, CD

    & Controller Development Kit.

    Application form : See Annex - I

    Course Coordinator : Mr. Kavindra Jayawardena

    Tel. : 011-2651880, 011-2650838

    Fax : 011-2650462

    E-mail : [email protected]

    Applications to be : Course Coordinator - WR, Communication Division,

    sent to: Arthur C. Clarke Institute for Modern Technologies, Katubedda,

    Moratuwa.

  • 8/14/2019 Training Booklet 2013.pdf

    11/24

    Page 11

    Practical Electronic Course [PEC]

    Course Code : 2013/COM/PEC/01

    Commencement : January, 2013

    Objective : To give the participants a practical electronic knowledge

    to carry out his own electronic equipment repair ;

    Product designing knowledge through learning the

    Theory & practical aspects of electronic components.

    Target Group : School Leavers & General Public/

    Course Contents :

    Revision of Basic Theory & Basic Passive Components Applications of Diodes Bipolar Transistors & FETs Applications of transistors in power Amplifiers & HIFI Amplifiers Operational Amplifiers & Oscillators Power Supplies & transformers Optical Components & sensor / transducers, Power

    Semiconductors

    Digital electronics & Microcontroller Programming Fundamentals of wave Propagation & Radio receiver Circuit Compact Disk Players Television systems Electronic Instruments Electronic Circuit Schematic PCB drawing using computer

    software

    Medium : Sinhala

    Duration : I. 21 days

    II. Saturdays (9.00 a.m.4.00 p.m.)

    Course Fee : Rs. 12,000/= (inclusive of Tea & Printed Course Material)

    Application form : See Annex - II

    Course Coordinator : Mr. Kavindra Jayawardena

    Tel. : 011-2651880, 011-2650838

    Fax : 011-2650462

    E-mail : [email protected]

    Applications to be : Course Coordinator - PEC , Communication Division,sent to: Arthur C. Clarke Institute for Modern Technologies, Katubedda,

    Moratuwa.

    mailto:[email protected]:[email protected]
  • 8/14/2019 Training Booklet 2013.pdf

    12/24

    Page 12

    Computer Hardware Engineering Course [CHEC]

    Course Code : 2013/COM/CHEC/01

    Commencement : June, 2013

    Objective : To expose the participant to the practical knowledge on

    computer hardware components and enable him / her to

    assemble, troubleshoot, upgrade & maintain personal

    computer systems.

    Target Group : School Leavers & General Public

    Course Contents :

    Introduction Operating Systems Maintenance of a PC Computer Trouble Shooting Motherboard & Memory Processor Expansion cards, on-board peripherals & Computer Upgrading Storage Devices Multimedia Keyboard / Mouse and Power Supply / Casing Scanners / Printers Computer Networking Computer Monitor

    Medium : Sinhala / English

    Duration : I. 08 days

    II. Saturdays & Sundays (9.00 a.m. to 4.00 p.m.)

    Course Fee : Rs. 9,000/= (inclusive of Tea & Printed Course Material)

    Application form : See Annex - II

    Course Coordinator : Mr. Samantha Pushpakumara

    Tel. : 011-2651880, 011-2650838

    Fax : 011-2650462

    E-mail : [email protected]

    Applications to be : Course Coordinator- CHEC , Computer Hardware Engineering Course,

    sent to Communication Division, Arthur C Clarke Institute for Modern

    Technologies, Katubedda, Moratuwa.

    mailto:[email protected]:[email protected]
  • 8/14/2019 Training Booklet 2013.pdf

    13/24

    Page 13

    Mobile Phone Repairing (MPR)

    Course Code : 2013/ED/MPR/01

    Commencement : To be announced later

    Objective : This course is designed to discuss the mobile phone hardware and software,

    starting from basics to chip level testing. The course aims at covering the

    theory and practices behind mobile phone repairing. The practical sessions are

    tailored to give the participants hands on experience of theory covered in

    lectures.

    Target Group : This course is aimed at individuals with a basic knowledge in electronics and

    interested in repairing minor & major handset problems and intend to set up

    their own mobile phone repair & service centers.

    Course Contents :

    Basics of mobile communication(Basically covers up to 4G technology) Introduction to general electronic components & their characteristics Introduction to electronic components used inside the mobile phone Basics of a SIM card & its functions Tools and instruments used in mobile phone repairing (Opening Tools

    and Tweezers, Soldering and Desoldering Tools, Muti Testers, SMD

    Rework stations, DC Power Supplies, Cleaning kits, Reballing kits,

    Working Table Equipments)

    Basic types of mobile phones & parts of a mobile phone (microphone,speaker, buzzer, LCD,antenna, Vibra motor, keypad, battery.. etc)

    Assembling and disassembling of different mobile phones Basic circuit introduction using different schematics Fault finding and trouble shooting Repairing procedure for repairing different hardware faults Soldering & de-soldering techniques including B G A reballing practice Phone flashing and unlocking of different mobile phones ( covers Sony

    Ericsson, Nokia, Chinese Mobilesetc )

    Medium : Sinhala/English

    Duration : 06 days ( 9.00 a.m.4.30 p.m. )

    Course Fee : Rs. 8,000/=(inclusive of Tea ,Printed Course Material & Software DVD)

    Application form : See Annex - II

    Course Coordinator : Mr.. Shrimal Koruwage

    Tel. : 011-2650838, 2650569 Fax : 011-2650462

    E-mail : [email protected]

    Applications to be : Course CoordinatorMobile Phone Repairing,

    sent to Electronics & Microelectronics Division, Arthur C Clarke Institute for Modern

    Technologies, Katubedda, Moratuwa.

    mailto:[email protected]:[email protected]
  • 8/14/2019 Training Booklet 2013.pdf

    14/24

    Page 14

    TRAINING PROGRAMMES - VIDATHA UNIT

    1. Workshop on usage of Electronic Test and Measuring Equipment - 02 days

    Target Group:

    People with good electronic knowledge and presently handling electronic test and measuring

    instruments

    Course Contents:

    Introduction to test and measuring instruments

    Its functions & specifications, operation and trouble shooting

    Further the participants will be given hands on experience in usage of basic test and measuring

    instruments such as multimeters, oscilloscopes, function generators etc.

    2. Workshop on Digital Electronics03 days

    Target Group:

    People with good electronic knowledge and presently engaging in an electronic component related

    circuit design

    Course Contents:

    Summary of basic digital electronics

    Information on Digital IC families, Digital ICs, Logic Gates etc.

    Applications of Logic Gates / Truth Tables / Boolean Algebra /Combinational Logic Circuits

    Usage of Flip Flops / Counters / Timers / Multivibrators / Sequential Logic Circuits

    Introduction to Microcontrollers and a simple controller implementation using

    a Microcontroller

    3. Workshop on PCB Construction03 days

    Target Group:

    People with good electronic knowledge and familiar with electronic components & circuit designCourse Content:

    Construction of schematic drawings

    Construction of layout drawings of a circuits

    Further the participants will be given hands on experience on PCB Construction using screen printing.

    The participants will also be trained on building and testing their own circuits. At the end of the

    programme, the participants are expected to be familiar with circuit symbols and Orcad software.

    Contact person: Mr. Parakrama PereraTele. : 011-2650838 Fax : 011-2650462

    E-mail : [email protected]

  • 8/14/2019 Training Booklet 2013.pdf

    15/24

    Page 15

    ACCIMT LIBRARY & INFORMATION CENTRE

    The objective of ACCIMT Library & Information Centre is to facilitate Professionals, Scientists engaged

    in research & development projects, Graduate and Undergraduate students by providing information

    on modern technologies in the fields of Communication, Information Technology, Electronics, Space

    Technologies, Robotics etc.

    THE COLLECTION

    The Library & Information Centre Collection of over 8650 books to cover information on

    Communication, Information Technology, Electronics, Space Technologies, Robotics and Hand Books,

    Data Library, Electronic Library (VHS, VCDs, DVDs), User surveys, Product guidelines, Application

    Notes, Design-oriented Text Books, Book Collection & souvenirs of Sir Arthur C Clarke, Encyclopedias,

    Directories and Standards are also available. Magazine on Electronics, Space Technologies are

    available in the Periodical Section.

    HOURS

    The Library & Information Centre is opened 5days a week( Monday to Friday- 8.30 a.m.4.15 p.m.)

    MEMBERSHIP

    There are two types of memberships.

    Library Personal Membership (for application formsee Annex V) Library Institutional Membership (for application formsee Annex VI)

    Library Personal Membership

    The Library function as a Special Library and offers membership for personals engaged in research &

    development projects, Undergraduates, Postgraduates, Students, Scientists, Scholars and General

    Public with a special interest in above fields of technologies.

    Library Institutional Membership

    This is specially introduced to support the Professionals in the Public and Private industrial sectors

    engaged in the above fields of technology. The Institute can nominate to 05 members.

    ENROLEMENT FEE

    Library Personal Membership : Rs. 500/=

    Library Institutional Membership : Rs. 2000/=

    SPECIAL FACILITIES FOR THE MEMBERS

    Reference Facilities Photocopying Service Access to Electronic Library Facilities to refer the book collection and souvenirs of Sir Arthur C Clarke Current Awareness Services

    HOW TO FIND A BOOK

    Those who wish to get the information about the collection can access our on-line catalogue through

    the Internet (http://www.accimt.ac.lk).Clients can search for materials by Author, Title or Key Words.

    Librarian Tel.: 2650839Arthur c Clarke Institute for Modern Technologies Fax: 2650462

    Katubedda, Moratuwa E-mail :[email protected]

    Sri Lanka

    mailto:[email protected]:[email protected]
  • 8/14/2019 Training Booklet 2013.pdf

    16/24

    Page 16

    ARTHUR C CLARKE INSTITUTE FOR MODERN TECHNOLOGIES

    Application For CPD Courses

    Name of Course ________________________________________________________________________

    Name in full ________________________________________________________________________

    Organization/Employer ____________________________________________________________________

    Organization Address _______________________________________________________________________

    Tele. No. _______________ Fax No. _________________ E-mail _____________________

    Current Position

    __________________________________________________________________________

    Home Address _______

    _____________________________________________________________________

    _______

    _____________________________________________________________________

    Contact Tele. No. (Home/ Mobile) ________________________

    Identity Card No. ________________________

    Qualification Degree Diploma Certificate G.C.E.(A/L), (O/L)

    Experience(briefly describe previous experience, identifying types of systems with which you have worked.)

    __________________________________________________________________________________________

    __________________________________________________________________________________________

    _______________________________________

    Applicants Signature __________________________________ Date ________________________

    Supervisors Signature ______________________________ Date ________________________

    Name of Supervisor __________________________ Title of Supervisor ______________________

    Organization __________________________ Supervisors Direct Tel. No. _______________

    APPLICATIONS SHOULD BE SENT TO THE COURSE COORDINATOR OF THE RELEVANT COURSE.

    Annex - I

  • 8/14/2019 Training Booklet 2013.pdf

    17/24

    Page 17

    Application for Basic/ Intermediate Level Training Courses

    1) Name of Course : .........................................................................................................................................

    2) Full Name in Block Letters : .........................................................................................................................................

    3) Permanent Address : .........................................................................................................................................

    4) Telephone Number(office) : .................................................................

    (Residence) :..................................................................

    5) National Identity Card No. : .................................................................6) Occupation : ................................................................Educational Qualifications :

    G.C.E. (O/L) Examination

    1. 5.

    2. 6.

    3. 7.

    4. 8.

    G.C.E. (A/L) Examination ( If applicable )

    1. 3.

    2. 4.

    7) Other qualifications............................................................................................................................................................................................................................................................................................................................................................................................ ................................................................................................................................... .............................................................................................

    8) Working Experience............................................................................................................................................................................................................................................................................................................................................................................................ ....................

    .............................................................................................................. .................................................................................................

    ....

    . .

    Date Signature of the Applicant

    Applications should be accompanied with copies of G.C.E. (O/L) , G.C.E.(A/L) Certificates and Certificates of

    experience to Course Coordinator of the relevant course.

    Arthur C Clarke Institute for Modern

    Technologies

    Annex - II

  • 8/14/2019 Training Booklet 2013.pdf

    18/24

    Page 18

    I hereby certify that the particulars furnished by me are true and correct to the best of my knowledge.

    by; imhk ,o o;a; ish,a,u udf.aoekqu mrsosi;H iy ksjerosnjg fuhskaiy;sl lr'

    .. .

    Signature Date

    w;aik oskh

    Express my consent for attending my child in the above workshop.

    udf.aorejd by; jevuqj i|yd iyNd.sug leue;a; fuhskam< lr is'

    ... ....

    Signature of Mother/Father/Guardian Date

    w;aik uj$mshd$Ndrlre oskh

    Full NameimQK kuName for Certificate

    iy;slh i|yd ku^bx.%Sisfhka&Address

    ,smskh

    Tel. No.

    rl;k wxlh

    Date of Birth

    Wmkaoskh

    Date : Month: Year: Age:

    oskh udih wjqreoao jhi

    Gender (Male/Female)

    ia;%s$mqreI Ndjh

    Highest Education Qualification:

    ,nd we;sby,u wOHdmk iqiql

    Involvements in Astronomy related activities, if any:

    ;drld oHdjg wod, l%shdldrl ;sf k i|ykalrkak'

    In case of an emergency situation, indicate the Contact

    number of a person whom we should inform about you

    during the course period

    yosiswjYH;djhloSoekq oSu msKsi Tnf.aNdrlrefjl=f.aia;r'

    Name:

    ku

    Relationship to you: Mother/Father/other

    kEluuj$mshd$fjk;aTP Number(s):rl;k wxl

    Annex- III

    Arthur C Clark Institute for Modern Technologies

    Workshop on Introducing to Astronomy & Space Science

    Application Form

    wh m; h

    Stamp Size

    Photograph

  • 8/14/2019 Training Booklet 2013.pdf

    19/24

    Page 19

    Annex -IV

    ARTHUR C CLARKE INSTITUTE FOR MODERN TECHNOLOGIES

    Application for Course on Computer Networking & Linux Server Administration

    Name in full ___ ________________________________________________________________________

    Home Address ______ _____________________________________________________________________

    ______ _____________________________________________________________________

    Contact Tele. No. (Home/ Mobile) ________________________

    Identity Card No. _______________________ E-mail __________________

    Qualification Degree Diploma Certificate G.C.E.(A/L), (O/L) Other

    Employment(If applicable)

    Organization/Employer ____________________________________________________________________

    Organization Address ____________________________________________________________________

    ____________________________________________________________________

    Tele. No. _______________ Fax No. _________________ E-mail __________________

    Current Position _____________________________________________________________________

    Applicants Signature ______________________________ Date ________________________

    Applications should be sent to the,

    Course Coordinator,

    Certificate Course in Computer Networking & Linux Server Administration,

    Arthur C Clarke Institute for Modern Technologies,Katubedda,Moratuwa.

  • 8/14/2019 Training Booklet 2013.pdf

    20/24

    Page 20

    ARTHUR C.CLARKE INSTUTUTE FOR MODERN TECHNOLOGIES

    Katubedda, Moratuwa, Sri Lanka.

    APPLICATION FOR THE LIBRARY PERSONAL MEMBERSHIP

    1. Full Name :- Prof./Dr./Mr./Mrs./Miss.2. Address :-3. Telephone No :- Fax No :- E-Mail :-4. Occupation :-5. If employed office address :-6. Age :-7. National ID No :-8. Courses followed at ACCIMT (if any) :-I hereby agree to abide by all rules, regulations and procedures of the library and will be responsible for the

    materials provided to me for reference purposes and pay for any item damaged while in my use.

    Date :- Signature :-

    *I................................................................................................of...............................................................certify

    that

    ......................................................................................is known to me for last ............ years and I recommend

    him to be a member of the ACCIMT library.

    Date :- Signature & Official Stamp

    Name :-

    Occupation :-

    Address :-

    *Certification should be obtained from a JP/Notary Public or Executive in government service.

    (Note : Please do not pay membership fees until we confirm your application.)FOR OFFICIAL USE

    Membership No :-

    Membership fees paid Rs. ............................. Cheque No. ...............................

    Receipt No. ............................. Date. ................................

    membership for the period from ................................... to ................................... 200.....

    Date :- Librarian :-

    Annex - V

  • 8/14/2019 Training Booklet 2013.pdf

    21/24

    Page 21

    Annex - VI

    ARTHUR C.CLARKE INSTUTUTE FOR MODERN TECHNOLOGIES

    Katubedda, Moratuwa, Sri Lanka.

    APPLICATION FOR THE LIBRARY INSTITUTIONAL MEMBERSHIP

    1. Name of Institution :-

    2. Address :-

    3. Tele. No.: Fax no.: E-mail:

    4. Officers Nominated/ with Designations:-

    Name: NIC No. Designation Signature

    (a)

    (b)

    (c)

    (d)

    (e)

    We hereby agree to abide by all rules, regulations and procedures of the Library and will be responsible for the

    materials provided to us for reference purposes and pay for any item damaged while in our use.

    Name of Head of Institution :-

    Designation :-

    Signature & Official Stamp:

    (Note : Please do not pay membership fees until we confirm your application.)

    FOR OFFICIAL USE

    Membership No :-

    Membership fees paid Rs. ............................ Cheque No. ................................

    Receipt No. ............................. Date. ................................

    membership for the period from ................................... to ................................... 200.....

    Date :- Librarian :-

  • 8/14/2019 Training Booklet 2013.pdf

    22/24

    Page 22

    CONTENTS

    Page

    1. Training Calendar2013 1

    2. Embedded Control Systems

    (Microprocessor/Microcontroller) for Industry

    Process Control and AutomationMechatronics

    Course [ECSC]

    2

    3. Programmable Logic Control Course (PLCC) 3

    4. Modern Electronic Test & Measuring Instrumentswith Digital Emphasis (METMIDE)

    4

    5. Modern Electronic Components (MEC) 5

    6. Modern Power Electronics (MPE) 6

    7. Computer Networking & Linux server

    Administration (CNLA)

    7

    8. Introduction to Remote Sensing and GIS (IRSGIS) 8

    9. Workshop on Introduction to Astronomy (WIA) 9

    10. Workshop On Robotics (WR) 10

    11. Practical Electronic Course (PEC) 11

    12. Computer Hardware Engineering Course (CHEC) 12

    13. Mobile Phone Repairing (MPR) 13

    14. Training ProgrammesVidatha unit 14

    15. ACCIMT Library & Information Centre 15

  • 8/14/2019 Training Booklet 2013.pdf

    23/24

    Page 23

    ANNEXES

    Page

    AnnexI

    Application form for CPD courses, ECSC, PLCC,METMIDE,MEC , MPE & IRSGIS

    16

    AnnexII

    Application form for courses, PEC , CHEC & MPR 17

    AnnexIIIApplication form for WIA workshop 18

    AnnexIV

    Application form for Computer Networking & Linux

    server Administration (CNLA)

    19

    AnnexV

    Application form for the Library Personal

    Membership

    20

    AnnexVI

    Application form for the Library InstitutionalMembership

    21

  • 8/14/2019 Training Booklet 2013.pdf

    24/24